poly-dome markers tm - acp international · drawn by: approved by: sheet no.: specification sheet...
TRANSCRIPT
www.acpinternational.com
ACP International/SA-SO/Jim’s Work/Marketing Projects/technical drawings/Poly-Dome Markers/Poly-Dome Markers.ai
Approved By: Sheet No.:Drawn By:
Specification Sheet
M. Prince 1 of 2
Date:
02-05-14J.Y. Rollins
18"
3.5"
The U.S. Department of Transportationrequires the use of markers to indicatethe approximate location of undergroundpipelines. Markers are located at road,railroad and navigable waterway crossings.Markers do not indicate the depth of the pipeline.
Pipeline Markers
• The material transported through the pipeline.
• The name of the pipeline operator.
• Toll-free emergency telephone number.
Marker Display
Underground Utility Markers willadhere to the following color codes:
Recommended AWPA Uniform ColorCode for Marking Underground Facilities
Poly-Dome MarkersTM
Poly-Dome MarkersTM
ElectricGas - Oil - SteamCommunication CATVWaterSewerReclaimed WaterProposed Excavation
09-6906
WARNING
CABLE
BURIED
®
1-800-227-2600
CALL UNDERGROUNDSERVICE ALERT
09-6906
WARNING
CABLE
BURIED
®
1-800-227-2600
CALL UNDERGROUNDSERVICE ALERT
*Warning*Danger*Caution
Company Logoand EmergencyContact Information
Product designation:Gas, CATV or Other
* Minimum 1 inch letter height.
Message PrintedOn Both Sides
6' ,7' or 8' Post(Typical)
www.acpinternational.com
ACP International/SA-SO/Jim’s Work/Marketing Projects/technical drawings/Poly-Dome Markers/Poly-Dome Markers.ai
Approved By: Sheet No.:Drawn By:
Specification Sheet
M. Prince 2 of 2
Date:
02-05-14J.Y. Rollins
Technical Description, Design and Material
Dimensions
Poly-Dome Markers
ACP International Poly-Domes shall be available in heights of 6’, 7’ and 8’ (as indicated in the partnumber). The Poly-Dome itself shall be 18" long and have a printing area 15". The opening of of thePoly-Domes shall be 3 1/2" diameter ID and have a 1/8 wall thickness. The poly post shall fit snuglyinside the Poly-Dome and also have a 1/8" wall thickness.
Density
Melt Index, 190/2.16
Tensile Strength at Yield2 in. min., Type IV bar.
Flexural Modulus,Tangent - 16:1span:depth 0.5 in./min.
ESCR, Condition B(100% Igepal), F50
Durometer Hardess,Type D (Shore D)
Vicate Softening TemperatureLoading 1, Rate A
Brittleness Temperature,Type A, Type 1 speciment
D1505
D1238
D638
D790
D1693
63
D5125
D746
0.952 g/cm3
20.0 g/10 min.
27 MPa
1,200 MPa
<10h
D2240
122ºC
<-75ºC
Property Test Method (ASTM) Typical Values
Important Notice: ACP International and SA-SO (a division of ACP International) truststhat the user of the product has the most accurate knowledge of how the product mightbe most effeciently or safely utilized in any given application or environment.
ACP International and SA-SO also trust that the above technical data and productinformation is based on thorough and accurate testing of the product, but are not liablefor any loss or damage to the product (or any other product, employee, or building fromwhich the product might come onto direct or indirect contact) resulting from anintentional or unintentional mishandling of the product.
The Poly-Dome, as manufactured by ACP International, shall consist of a single piece, injectionmolded top portion (Poly-Dome), and a UV Resistant polyethylene post for the bottom portion.The ACP Poly-Dome Marker shall be made from a high density polyethylene with a marlexrating of 9018.
The ACP Poly-Dome shall be corona treated to accept printing and/or decal application. Printingshall be done through a silk screen process with UV Resistant enamel inks.
The lifespan of the Poly-Dome and Post, assuming average UV and climate exposure, shall remainbold for at least 10 years in an outdoor environment.
During installation, the fully assembled Poly-Dome Marker shall be buried 2 feet into the ground toensure maximum stability.
2’ m
in.
dept
h
ExistingGround
09-6906
WARNING
CABLE
BURIED
®
1-800-227-2600
CALL UNDERGROUNDSERVICE ALERT
18” Poly-Dome w/15" reserved spacefor printing onboth sides
6' ,7' or 8' Post(Typical)
Poly-Dome MarkersTM