polychem acrastrip products
DESCRIPTION
POLYCHEM ACRASTRIP PRODUCTS. Do you have a true desire to eliminate acetone use in your facility? Are you aware of the dangers associated with using acetone? Dangers of storage ? Dangers of improper container grounding ? Dangers of static charge and sparks? - PowerPoint PPT PresentationTRANSCRIPT
POLYCHEMACRASTRIPPRODUCTS
Do you have a true desire to eliminate acetone usein your facility?
Are you aware of the dangers associatedwith using acetone?
Dangers of storage ?Dangers of improper container grounding ?
Dangers of static charge and sparks?Polychem Acrastrip has been developed in partnership
with the E.P.A.all users receive a recognition award from the
DfE division of the EPA after 4-6 months of usage.
WHAT WILL BE ACCOMPLISHEDWHEN THE ACRASTRIP IS FULLY IMPLEMENTED?
Cost savings
A drum of Acrastrip is equal to 8 drums of acetone. Mainly because of the lack of evaporation and
the ability to continually reuse the solution
This yields an average savings of 40%In addition, the acetone waste, which is
hazardous, will cost an additional amount to be removed off site.
This yields a total average savings of 50%
Safety
Acrastrip is non-flammable and saferfor the laminator to use.
It does not contain harmful alkalisor toxic solvents like many other
acetone alternatives offeredon the market.
Hazardous waste reductionAcrastrip and resin/gel coat waste is usually non-hazardous
This may help you to no longer be a Large Quantity hazardous waste generatorAs you can see by the various resin/ Acrastrip samples below, regardless of the resin type, it is easily separated and reusable
Acrastrip is a more effective and universal product than acetone.
It is much more effective with alldesired cleaning tasks in a fiberglass shop.
Chop gun internal seals, when flushed with Acrastrip, will last considerably longer due to
the lubrication features of the product.
Cured resin stripping, a task which is ineffective with acetone, becomes easily accomplished
with Acrastrip products.
Additional applications such as final finish wiping,floor stripping, gel and glue rig cleaning
are simple tasks for Acrastrip
ACRASTRIP 600 CRR
The original formulation which can be used as is or diluted with water.
Recommend the undiluted solution for lamination managers who are fearful of introducing water into their laminate or recommend they use it diluted for tool cleaning and then rinse with the undiluted 600 concentrate for removing any excess water.
ACRASTRIP 800
A HIGHER STRENGTH VERSION OFTHE ACRASTRIP 600 WHICH CAN NOTBE DILUTED WITH WATER. USE THE 800 ON ALL RESINS... ESPECIALLY EPOXY AND VINYL ESTERS
FINAL TIPS ON PRODUCT SELECTION
Both the Acrastrip 600 and the Acrastrip 800provide benefits to the user.
Try the AS-600 where you need a single product to perform a wide variety of applications. This is especially true in the marine industry where one may need a product that can clean tools and flush guns but you may also need a product that can be used in gel coat patch, final finish, post sanding and non-skid cleaning. You can vary the dilution ratios for each application from undiluted for full strength tool rinsing to 5% -33% solutions for the other applications.
If your applications are limited to resin cleaning and gel coat flushing, and an extra strength product is desired, then AS-800 would be the correct product selection.
HOW TO TEST THE ACRASTRIP
KEY APPLICATIONSExamples:
• Tool cleaning (Rollers, scissors, brushes, etc.)• Internal mix chop guns• External mix gun tips
• RTM systems• Marble wash containers
• Pultrusion molds and equipment • Resin removal on a wide variety of parts
• Cured resin stripping• Gel coat guns and rigs
• Methyl Methacrylate glue rigs• Floor cleaning
Among the applications, identify the priorities
Then set up your testIf it’s roller and Misc. tool
cleaning, Use the Acrastrip test kit
Place the grit guard at the bottom of the 5 gallon pailThen add the 2 gallons of Acrastrip 600 or 800
Take a clean tool and purposely contaminate it with activated Resin.
Using agitation against the grit guard, clean the toolshaking off the excess Acrastrip when done.
Now retrieve tools which have already been cleaned in acetone.Demonstrate to the customer how “sticky” the handles remain.
Submerge them in the Acrastrip and wipe them off with a dry rag. Hand the tool back to the customer for their inspection.
Explain that the lubricity left behind will not interfere with the cure ofThe resin but will effectively lubricate all parts for extended tool life. Show the customer the filter bag. When you’re done with your demo, remove the grit guard. Agitate the solution and submerge the bag in
the used fluid, using the garter to hold it in place around the pail. Explain that the large resin particles which will separate over night,
can be captured and removed with this bag.Offer the Equipment program for those who may qualify
Then you can continue to use the Acrastrip by providing those kits to each laminator as their individual work station
If you want to test a chop gun flush,fill the flush pot with either Acrastrip product.
Be sure the flush pressure is at or above 60 psi. Flush the gun into a 5 gallon pail for eventual reuse
in the tool cleaning operation.
Be sure to also flush gel coats in the same fashion --The Acrastrip can clean the outsides of the gun
and rig equipment as well!
OTHER APPLICATIONS:
It can strip resin off the floor by leaving asmall amount on the contaminated area (safely)
and scraping that area the following day.If it’s light contamination, it may come off in minutes