polypropylene for rotational moulding -...

20
POLYPROPYLENE FOR ROTATIONAL MOULDING RMPP141 is a Polypropylene Compound designed to bridge the gap between PE and Engineering materials used in the Roto Moulding Industry

Upload: dodiep

Post on 04-Jun-2018

250 views

Category:

Documents


3 download

TRANSCRIPT

Page 1: POLYPROPYLENE FOR ROTATIONAL MOULDING - …psdrotoworx.com/wp-content/uploads/2017/01/Product-Information... · RMPP141 has . OUTSTANDING RESULTS . in all moulding tests . Elevated

1

PSD ROTOWORX © September 2016

POLYPROPYLENE FOR ROTATIONAL MOULDING

RMPP141 is a Polypropylene Compound designed to bridge the gap between PE and Engineering materials used in the Roto Moulding Industry

Page 2: POLYPROPYLENE FOR ROTATIONAL MOULDING - …psdrotoworx.com/wp-content/uploads/2017/01/Product-Information... · RMPP141 has . OUTSTANDING RESULTS . in all moulding tests . Elevated

RMPP141 has OUTSTANDING

RESULTS in all moulding tests

Elevated temperature applications, wet and dry

Fills ribs, corners and difficult areas very well

Great sintering and bubble removal, resulting

in excellent inside-outside surface

Stiffness, creep, chemical resistance and abrasion resistance

Page 3: POLYPROPYLENE FOR ROTATIONAL MOULDING - …psdrotoworx.com/wp-content/uploads/2017/01/Product-Information... · RMPP141 has . OUTSTANDING RESULTS . in all moulding tests . Elevated

Extensive practical testing shows a

HUGE OPPORTUNITY using RMPP141 to replace PE

Page 4: POLYPROPYLENE FOR ROTATIONAL MOULDING - …psdrotoworx.com/wp-content/uploads/2017/01/Product-Information... · RMPP141 has . OUTSTANDING RESULTS . in all moulding tests . Elevated

PP RMPP141 BETTER COST FOR EFFECT

Lower density and weight reduction

Ambient grinding Improved

properties

Page 5: POLYPROPYLENE FOR ROTATIONAL MOULDING - …psdrotoworx.com/wp-content/uploads/2017/01/Product-Information... · RMPP141 has . OUTSTANDING RESULTS . in all moulding tests . Elevated

WEIGHT REDUCTION

RMPP141

70% PE

100%

Same performance with

30% LESS

Page 6: POLYPROPYLENE FOR ROTATIONAL MOULDING - …psdrotoworx.com/wp-content/uploads/2017/01/Product-Information... · RMPP141 has . OUTSTANDING RESULTS . in all moulding tests . Elevated

N2

AMBIENT GRINDING

NO LIQUID NITROGEN REQUIRED

Page 7: POLYPROPYLENE FOR ROTATIONAL MOULDING - …psdrotoworx.com/wp-content/uploads/2017/01/Product-Information... · RMPP141 has . OUTSTANDING RESULTS . in all moulding tests . Elevated

0

2

4

6

8

10

12 Stiffness

Cycle time

HDT

Potential Weight reduction x10% Impact 0 degr

Impact Room Temp

Resistance to Creep

PE RMPP141

IMPROVED PROPERTIES

Page 8: POLYPROPYLENE FOR ROTATIONAL MOULDING - …psdrotoworx.com/wp-content/uploads/2017/01/Product-Information... · RMPP141 has . OUTSTANDING RESULTS . in all moulding tests . Elevated

Conclusion: USING RMPP141

POTENTIAL COST SAVINGS

Lower density and weight reduction

Ambient grinding Improved

properties

Page 9: POLYPROPYLENE FOR ROTATIONAL MOULDING - …psdrotoworx.com/wp-content/uploads/2017/01/Product-Information... · RMPP141 has . OUTSTANDING RESULTS . in all moulding tests . Elevated

ALL-ROUND MECHANICAL PERFORMANCE

TENSILE MODULUS

1300 Mpa ISO527

FNCT

300+ hours AT 50ºC/5MPa

ISO16770

HDT

115ºC at 0.455 Mpa

ARM IMPACT

23 J/mm at 23ºC 15 J/mm at 0ºC

6mm Plaque

Page 10: POLYPROPYLENE FOR ROTATIONAL MOULDING - …psdrotoworx.com/wp-content/uploads/2017/01/Product-Information... · RMPP141 has . OUTSTANDING RESULTS . in all moulding tests . Elevated

RMPP141 FOR USE IN INFRASTRUCTURE

Telecommunications pits Culverts

Inspection pits

Manholes Connectors

Underground tanks

LIST OF PRODUCTS

WASTE WATER SYSTEMS ARE NOT ONLY PIPES There is a need for moulded products as well

Pipe systems need inspection chambers, pump houses, pits, etc

The market needs many different products

Page 11: POLYPROPYLENE FOR ROTATIONAL MOULDING - …psdrotoworx.com/wp-content/uploads/2017/01/Product-Information... · RMPP141 has . OUTSTANDING RESULTS . in all moulding tests . Elevated

RMPP141 BALANCES BOTH

HIGH IMPACT (lacks stiffness)

HIGH STIFFNESS (lacks flexibility)

RMPP141 BALANCES BOTH

HIGH IMPACT (lacks stiffness)

HIGH STIFFNESS (lacks flexibility)

BALANCING STIFFNESS WITH TOUGHNESS

Page 12: POLYPROPYLENE FOR ROTATIONAL MOULDING - …psdrotoworx.com/wp-content/uploads/2017/01/Product-Information... · RMPP141 has . OUTSTANDING RESULTS . in all moulding tests . Elevated

After 20* years, RMPP141 remains SUPERIOR TO POLYETHYLENE

2.57

1.84

3.86

2.76

Year 1 Year 20

PE RMPP141 MPa PE RMPP141

20 YEARS

*

* Extrapolated data

LONG TERM CREEP (LOAD) STRENGTH

Page 13: POLYPROPYLENE FOR ROTATIONAL MOULDING - …psdrotoworx.com/wp-content/uploads/2017/01/Product-Information... · RMPP141 has . OUTSTANDING RESULTS . in all moulding tests . Elevated

MINUTES UNDER

VACUUM (0.1bar)

10min PE

60min RMPP141

PE

RMPP141

MINUTES UNDER

VACUUM (0.1bar) 500L Tank

10min PE

60min RMPP141

VACUUM TEST

Page 14: POLYPROPYLENE FOR ROTATIONAL MOULDING - …psdrotoworx.com/wp-content/uploads/2017/01/Product-Information... · RMPP141 has . OUTSTANDING RESULTS . in all moulding tests . Elevated

RMPP141 MOULDING TEST Excellent surface, fantastic kiss off, perfectly embedded inserts

AUTOMOTIVE

Page 15: POLYPROPYLENE FOR ROTATIONAL MOULDING - …psdrotoworx.com/wp-content/uploads/2017/01/Product-Information... · RMPP141 has . OUTSTANDING RESULTS . in all moulding tests . Elevated

AUTOMOTIVE

Excellent Stiffness

Good Impact

Excellent FNCT/ESCR

High HDT

No/Low warpage

Good Abrasion resistance

Page 16: POLYPROPYLENE FOR ROTATIONAL MOULDING - …psdrotoworx.com/wp-content/uploads/2017/01/Product-Information... · RMPP141 has . OUTSTANDING RESULTS . in all moulding tests . Elevated

65°C PE

115°C RMPP141

DIFFERENCE IN HDT

HDT at 0.455 Mpa

PE vs RMPP141

Page 17: POLYPROPYLENE FOR ROTATIONAL MOULDING - …psdrotoworx.com/wp-content/uploads/2017/01/Product-Information... · RMPP141 has . OUTSTANDING RESULTS . in all moulding tests . Elevated

PALLET RACKING TEST

20% Less material

PE

MATERIAL USED %

PE

27.5mm

DEFORMATION mm

RMPP141

22.5mm

RMPP141

Page 18: POLYPROPYLENE FOR ROTATIONAL MOULDING - …psdrotoworx.com/wp-content/uploads/2017/01/Product-Information... · RMPP141 has . OUTSTANDING RESULTS . in all moulding tests . Elevated

…EVEN FURNITURE! Abrasion and scratch resistance

Page 19: POLYPROPYLENE FOR ROTATIONAL MOULDING - …psdrotoworx.com/wp-content/uploads/2017/01/Product-Information... · RMPP141 has . OUTSTANDING RESULTS . in all moulding tests . Elevated

Contributing to the future development of rotational moulding

RMPP141

n

CH3

Choice of Black, Natural and White

Opens new markets not suited to PE

Available as pellets or powder

High quality and superior performance Easy to process

Potential cost savings

Page 20: POLYPROPYLENE FOR ROTATIONAL MOULDING - …psdrotoworx.com/wp-content/uploads/2017/01/Product-Information... · RMPP141 has . OUTSTANDING RESULTS . in all moulding tests . Elevated

1

PSD ROTOWORX © September 2016

POLYPROPYLENE FOR ROTATIONAL MOULDING

RMPP141 is a Polypropylene Compound designed to bridge the gap between PE and Engineering materials used in the Roto Moulding Industry