polyurethane bushings
TRANSCRIPT
205204
FLAT SPARE TIRE MOUNT
ANGLED SPARE TIRE MOUNT
POLYURETHANE BUSHINGS
ALIGNMENT CAM KIT
BUMP STOPS 2’’ LIFT SHACKLES - PAIR
TIE RODS
BALL JOINTS
FTS14 SD Spring Bush FTS275/278 (Front)FTS15 SD Spring Bush FTS275/278 (Rear)FTS1100 Bushing & Sleeve Kit For FTS1500-
5/6/8/10/11 Upper ArmsFTS1101 Bushing & Sleeve Kit For FTS1500-10
& FTS1500-11 Lower ArmsFTS1102 Bushing & Sleeve Kit For FTS3000-6
& FTS3200-6 & FTS3100-6 Produced Before 7/1/99
FTS1103 Bushing & Sleeve Kit For FTS4130-1 & FTS4130-5
FTS1104 Bushing & Sleeve Kit For FTS4130-2FTS1105 Bushing & Sleeve Kit For FTS4130-3FTS1106 Bushing & Sleeve Kit For FTS4130-4-4
& FTS4130-4-6FTS1107 Bushing & Sleeve Kit For FTS7100-6 &
FTS7200-6FTS1108 Bushing & Sleeve Kit For FTS97150-6
FTS1109 Bushing & Sleeve Kit For FTSC10-1 & FTSC10-2 Upper Arms
FTS1110 Bushing & Sleeve Kit For FTSC10-1 & FTSC10-2 Lower Arms
FTS1111 Bushing & Sleeve Kit For FTS7268-10 & FTS7268-11 Upper Arms
FTS1112 Bushing & Sleeve Kit For FTS7268-10 & FTS7268-11 Lower Arms
FTS1113 Bushing & Sleeve Kit For FTS1599-6FTS1114 Bushing & Sleeve Kit For FTS98100-6FTS1115 Bushing & Sleeve Kit For FTS3100-6
Produced After 7/1/99FTS1116 FTS2100K/2200K Bushing Kit Upr/LwrFTS1119 Bushing Kit For FTS3400 KitFTS1120 Bushing Kit For FTS3420 KitFTS1121 Ford F150 LCA Long TravelFTS1122 2004 Ford F150 Front Lower
Shock BushingFTS1125 Lower Bearing Kit For FTS2300KFTS1129 Lower Bushing Kit For FTS2300KFTS50085 Jeep YJ Front & Rear FTS90109 Small Joint Bushing Kit FTS90110 Large Joint Bushing KitFTS98011 2003-11 Dodge 2500 Short Arm FTS98012 Radius Arm Bushing Kit FTS98013 Replacement Bushing For FT451
This simple flat mount allows you to position a tire anywhere in the bed of your truck. You can mount the base plate directly in your bed, for a permanent mount, or spend a little extra time placing the mounting plate underneath your bed, allowing you to remove your spare tire without anyone knowing it was ever there.
Universal1 FTT10001BK Black Flat Tire Mount
Constructed using 1 1/4” steel tubing and MIG welded at the joints for long lasting strength and durability. The angled spare tire mount allows you to securely carry a full size spare tire, up to 35” tall, in the bed of your truck. Installation only requires drilling four holes to secure one of the cleanest working spare tire carriers available.
Universal1 FTT10002BK Black Angled Tire Mount
Bushing replacement kits and a complete line of polyurethane accessories are available.
FTS290 1997-03 Ford F-150 2WD/4WDFTS292 (99) 2004-08 Ford F-150
2005-08 F-250/F-350 4WDFT532 (100) 1981-96 Ford F-150FTS92012 (100) 2005-07 Ford F-250/F-350 4WD
Ball Joint Eccentric CamFTS543 1983-88 Ford Ranger 2WD
3 1/8 Degree Alignment CamFTS291 1998-07 Ford Ranger 2WDFTS594 (100) 1983-97 Ford Ranger 2WD
1987-08 F-250/F-350 2WD3 1/8 Degree Alignment Cam
FTS50297 2007-08 Jeep JK Front KitFTS94030 Jeep TJ Rear Eccentric Cam Kit
FOOTNOTE99. For use w/6” F150 kits, Super Duty Radius Arm or
4 Link kits.
100. Sold Individually.
FTS50027 (100) 4” Tall Jeep TJ Front or RearFTS3400-111 (100) 5” Tall 1994-01 Dodge 4WD
FrontFTS89 (100) 4.5” Tall UniversalFTS86 (100) 2” Tall UniversalFTS87 (100) 1.5” Tall UniversalFTS88 (100) 1” Tall UniversalFTS60235 (100) 5/8” Tall Universal
FTS3400-111
FTS50027
FTS60235FTS88
FTS87
FTS86
FTS89
One of the easiest ways to lift the rear suspension on a mini/mid size truck is using 2” lift shackles. Our stout 3/8” steel plate shackles are easily installed, providing the lift and performance demanded by off roaders.
FTS2094 1983-03 GM S10/S15 TruckFTS2092 1989-95 Toyota Truck 2WDFTS3092 1989-95 Toyota Truck 4WDFTS2096 1995.5-04 Toyota Tacoma 2wd 5 Lug
FTS20277 2007-11 GM 1500 FTS20460 2001-10 GM 2500HD/3500 (Inner)FTS20461 2001-10 GM 2500HD/3500 (Outer)FTS93011 2006-11 Dodge 1500 FTS93010 2002-05 Dodge 1500FTS60030 2006-09 Nissan Frontier FTS70110 2007-11 Toyota TundraFTS96005 2005-11 Toyota Tacoma VSC onlyFTS96004 2006-09 Toyota FJ
FTS1599-6-1 1999-06 GM C1500FTS20155 1988-98 GM C1500/2001-10
K2500HD w/Upper Arm (Upper) FTS30051 1998 Ranger (Upper)FTS96000 1995.5-04 Toyota 4WD (Upper)
207206
1 1/2’’ ADD-A-LEAFS
PITMAN ARMS
LIFT BLOCKS & U-BOLTS
HEIM JOINTS
END LINKS
SHOCK SPANNER WRENCH
Smooth RIde Add-A-LeafsMost add a leafs are known for being stiff and hard to install. Well not anymore. We have taken modern thin leaf technology and incorporated it in our smooth ride add a leaf kits, allowing for a effortless installation and the smoothest possible ride.
FTS200 Mini Truck Universal
FTS202 GM S10/S15 Rear
FTS206 GM C1500 1988-98 Rear
FTS212 GM 1999-10 Rear
FTS214 Ford F150 1997-03 2WD
FTS216 Ford F250/350 2008 Rear
FTS208 Ford Super Duty 4WD Rear
FTS207 Dodge 1500 Ram 4WD Rear
FTS215 Dodge 1500 2002-05
FTS209 Dodge 2500 1994-02 4WD Rear
FTS203 Dodge Dakota
FTS205 Toyota Tacoma Rear
FTS213 Jeep XJ
Dropped pitman arms are necessary in many of our kits, to correct steering geometry after the installation of a suspension system. We manufacture our pitman arms to be stronger then stock units, using the latest forging and CNC machining technology.
FTS92011 2005-11 Ford F250/F350FTS310 1999-04 Ford (After March
Production Date)FTS311 1999-04 Ford Super Duty 2WDFTS309 1999 Ford (Prior to March
Production Date)FTS93012 2009-11 Dodge 2500/3500 4WDFTS93001 2003-08 Dodge 2500/3500 4WDFTS3410 2000-01 Dodge 1500 4WDFTS3410 1994-02 Dodge 2500FTS3409 1994-99 Dodge 1500 4WDFTS94018 Jeep TJ and YJFTS50294 Jeep JK
Pitman Arm Conversion ChartFabtech # 1999-04 Ford # Spline Count
FTS309 F81A-3590-LC 32
FTS309 F81A-3590 BA 32
FTS309 F81Z-3590 LB 32
FTS310 YC3Z-3590 CA 36
FTS311 YC3Z-3590 DA 36
FTS311 YC35-3590 DB 36
FTS311 YC34-3590 DA 36
FTS309 FTS310 FTS311
Right hand threaded Teflon Heim ends are available as single units for specialty fabrication.
FTS98000 3/4” Teflon HeimFTS18 1 1/4” Teflon HeimFTS50 Jam Nut 3/4” Right Hand ThreadFTS92 Jam Nut 1 1/4” Right Hand ThreadFTS404-100 Misalignment for 1 1/4” HeimFTS43 Misalignment for 3/4” Heim
Lift Blocks Size FitmentFTSBK1 1” Rear Lift BlocksFTSBK15 1.5” Rear Lift BlocksFTSBK2 2” Rear Lift BlocksFTSBK3 3” Rear Lift BlocksFTSBK4 4” Rear Lift BlocksFTSBK41 4” Rear Block w/Bump StopFTSBK5 5” Rear Lift BlocksFTSBK53 5.5” Flat Rear Lift Blocks
Lift Blocks Size FitmentFTSBK43 4” 2011 GM 2500HD/3500FTSBK10 1” 2003-04 Dodge 2500/3500 Rear
Lift BlocksFTSBK21 2” 2003-11 Dodge 2500/3500FTSBK52 5” 2004-08 F150 Rear Lift Blocks
(order FTS737 U-bolt kit)FTSBK22 2” 2004-08 F150 Rear Lift Blocks
(order FTS350UBK U-bolt kit)FTSBK31 3” Rear Lift Blocks w/offset pinFTSBK54 5.75” 2005-08 Super Duty Rear Lift
Blocks w/Integrated Bump stop
U-Bolt # Shape Axle Dia./Length/ Thread Size
FTS730 Round 2.75” x 6.70” x 1/2”-20FTS743 Round 2.75” x 8.70” x 1/2”-20FTS725 Round 3.00” x 10.75” x 1/2”-20FTS729 Round 3.31” x 7.50” x 1/2”-20FTS735 Round 3.56” x 6.00” X 1/2”-20FTS722 Round 3.25” x 9.63” x 9/16”-18FTS723 Round 3.25” x 10.63” x 9/16”-18FTS724 Round 3.25” x 13.38” x 9/16”-18FTS734 Round 3.50” x 10.63” x 9/16”-18FTS738 Round 4.00” x 12.50” x 9/16”-18FTS748 Round 4.00” x 15.00” x 9/16”-18FTS351UBK Round 3.50” x 12.00” x 5/8”-18FTS728 Round 3.50” x 16.50” x 5/8”-18FTS742 Round 3.50” x 18.00” x 5/8”-18FTS744 Round 3.50” x 13.50” x 5/8”-18FTS749 Round 3.50” x 20.00” x 5/8”-18FTS739 Round 3.75” x 5.35” x 5/8”-18FTS751 Round 4.06” x 5.63” X 5/8”-18FTS352UBK Semi
Round3.08” x 11.5” x 9/16”-18
FTS750 Semi Round
2.99” x 19.20” x 7/8”-14
FTS1500UBK-3 Square 2.63” x 12.50” x 9/16”-18FTS3400UBK Square 2.63” x 14.50” x 9/16”-18FTS350UBK Square 3.00” x 10.50” x 9/16”-18FTS737 Square 3.10” x 12.50” x 9/16”-18FTS726 Square 2.63” x 14.50” x 5/8”-18FTS3500UBK Square 3.00” x 17.50” x 5/8”-18FTS752 Square 3.10” x 15.38” x 3/4”-16FTS753 Square 3.10” x 17.38” x 3/4”-16
Looking for a simple and cost effective way to lift the back of your truck? Fabtech offers U-bolts and Lift Blocks, in a wide range of sizes, that cover almost every application available.
Universal
Vehicle Specific
FTS1126 Sway Bar Endlink Bush Kit w/BLTFTS1127 Sway Bar Endlink CompleteFTS1128 Sway Bar Bushing ReplacementFTS93009 Sway Bar LinksFTS95003 2004-09 Nissan Titan Sway Bar kit FTS91001 Sway Bar End Link Kit
FTS98006 2.0 Spanner WrenchFTS98008 2.5 Spanner Wrench FTS98005 Basic Kit Spanner Wrench FTS89905 4.0 Spanner Wrench
208
MISCELLANEOUS
EXTENDED BRAKE LINES
DESERT GUARDS
SHOCK BOOTS
FTS92003 1997-08 Ford F150 Driveline SpacerFTS24092 JK Track Bar Bracket Gusset KitFTS21064 2007 K1500 Suburban
Rear Coil Spacers FTS92025 F250/350/Excursion
Trac Bar Bracket
FTS91005 2001-06 GM 2500HD (Front)FTS91006 2007-08 GM2500HD (Front)FTS7268-9 1983-99 GM S10 2WD
w/3” Lift SpindlesFTS1500-9 1988-98 GM C/K1500 2WD/4WDFTS92007 2005-07 Ford Super Duty 4WD (Front)FTS94055 2007-08 Jeep JK (Front & Rear)FTS94017 1997-05 Jeep TJ (Front & Rear)
Because some suspension systems require longer brake lines, we have designed factory replacements, using the highest quality braided stainless steel lines. All of our extended brake line kits meet DOT specifications.
WARRANTY AND WARNINGS
Fabtech provides a Limited Lifetime Warranty to the original retail purchaser who owns the vehicle, on which the product was originally installed, for defects in workmanship and materials.
The Limited Lifetime Warranty excludes the following Fabtech items; bushings, bump stops, ball joints, tie rod ends, limiting straps, cross shafts, heim joints and driveshafts. These parts are subject to wear and are
not considered defective when worn. They are warranted for 60 days from the date of purchase for defects in workmanship.
Dirt Logic and Performance Coilover take apart shocks are considered a serviceable shock with a one year warranty on leakage only. Service seal kits are available separately for future maintenance. All other shocks
are covered under our Limited Lifetime Warranty.
Fabtech does not warrant any product for finish, alterations, modifications and/or installation contrary to Fabtech’s instructions. Alterations to the finish of the parts including but not limited to painting, powder
coating, plating and/or welding will void all warranties. Some finish damage may occur to parts during shipping, which is considered normal and is not covered under warranty.
Fabtech products are not designed nor intended to be installed on vehicles used in race applications or for racing purposes or for similar activities. (A “RACE” is defined as any contest between two or more vehicles,
or any contest of one or more vehicle against the clock, whether or not such contest is for a prize). This warranty does not include coverage for police or taxi vehicles, race vehicles, or vehicles used for government
or commercial purposes. Also excluded from this warranty are sales outside of the United States of America.
Installation of most suspension products will raise the center of gravity of the vehicle and will cause the vehicle to handle differently than stock. It may increase the vehicle’s susceptibility to a rollover, on road and
off road, at all speeds. Extreme care should be taken to operate the vehicle safely at all times to prevent rollover or loss of control resulting in serious injury or death. Fabtech front end Desert Guards may impair the
deployment or operation of vehicles equipped with supplemental restraining systems/air bag systems and should not be installed if the vehicle is equipped as so.
Fabtech makes every effort to ensure suspension product compatibility with all vehicles listed in the catalog, but due to unknown auto manufacturer’s production changes and/or inconstancies by the auto manufac-
turer, Fabtech cannot be responsible for 100% compatibility, including the fitment of tire and wheel sizes listed. The tire and wheel sizes listed in Fabtech’s catalog are only a guideline for street driving with noted
fender trimming. Fabtech is not responsible for damages to the vehicle’s body or tires. Fabtech is not responsible for premature wear of factory components due to the installation of oversized tires and wheels.
Fabtech’s obligation under this warranty is limited to the repair or replacement, at Fabtech option, of the defective product only. All costs of removal, installation or re-installation, freight charges, incidental or
consequential damages are expressly excluded from this warranty. Fabtech is not responsible for damages and/or warranty of other vehicle parts related or non related to the installed Fabtech product. This warranty
is expressly in lieu of all other warranties expressed or implied. This warranty shall not apply to any product that has been subject to accident, negligence, alteration, abuse or misuse as determined by Fabtech.
Fabtech suspension components must be installed as a complete system including shocks as shown in our current catalog. All warranties will become void if Fabtech parts are combined and/or substituted with
other aftermarket suspension products. Combination and/or substitution of other aftermarket suspension parts may cause premature wear and/or product failure resulting in an accident causing injury or death.
Fabtech does not warrant products not manufactured by Fabtech.
Depending on the condition of the factory suspension components retained after the installation of a Fabtech suspension not all vehicles may have the same ride stance front to rear as described in the catalog. The
blue color of suspension components shown in all Fabtech photographs are for display purposes only. Majority of all Fabtech components will be black specifically where noted with part numbers ending in BK.
Installation of Fabtech product may void the vehicles factory warranty; it is the consumer’s responsibility to check with their local vehicle’s dealer for warranty disposition before the installation of the product.
Some state laws may prohibit modification of suspension to a vehicle in whole or in part. It is the responsibility of the installer and consumer to consult local laws prior to the installation of any Fabtech suspension
product to comply with such written laws.
It is the responsibility of the distributor and/or the retailer to review all warranties and warnings of Fabtech products with the consumer prior to purchase.
Fabtech reserves the right to supersede, discontinue, change the design, finish, part number and/or application of parts when deemed necessary without written notice. Fabtech is not responsible for misprints or
typographical errors within the catalog, price sheet or website.
Some images and situations portrayed in this book are not real and are intended for entertainment purposes only. No animals were harmed in the production of this book.
For complete warranty & warnings go to www.fabtechmotorsports.com
Universal Guards are constructed of 1 1/2” diameter tubing and have provisions for mounting two 6” round auxiliary lights. Will not fit vehicles with body lifts. Lights not included.
Universal1 FTT10020BK Mini/Mid Universal
Urethane boots provide additional protection to exposed shock absorber shafts against flying rocks, dirt and mud while enhancing the appearance of your suspension. Shock boots will only fit Performance Shocks. Boots are individually packaged.
FTS7000R RedFTS7000B BlueFTS7000G Gray
FTS7000BK BlackFTS7000Y Yellow
FABTEC
HBU
ILT T
O EN
DU
RE
PHONE 909.597.7800 FAX 909.597.71854331 EUCALYPTUS AVE. CHINO, CA. 91710
ON THE WEB AT WWW.FABTECHMOTORSPORTS.COME-MAIL US AT [email protected]
CAT #FTC2011
877-4-FABTECH877-432-2832
TOLLFREE