poplin - kohlerresources.kohler.com/plumbing/kohlerapac/pdf/poplin... · 2019. 2. 22. ·...
TRANSCRIPT
INSTALLATION INSTRUCTIONS
K-99666T-0/K-99666T-CS1/K-99666T-B16
POPLIN
MIRRORS
BEFORE YOU BEGINBEFORE YOU BEGIN
�
�
�
�
�
�
Please read these instructions carefully to familiarizeyourself with the required tools, materials, and installationsequences. Follow the sections that pertain to yourparticular installation . This will help you avoid costlymistakes. In addition to proper installation, read alloperating and safety instructions.All information in these instructions is based upon thelatest product information available at the time ofpublication. Kohler China Ltd. reserves the right to makechanges in product characteristics, packaging, oravailability at any time without notice.These instructions contain important care, cleaning, andwarranty information-
Obey all electrical regulations in force at the time ofinstallation.The mirror K-99666T-0/K-99666T-CS1adopts naturalwood with high quality. With further processing, its harmfulgas emission is less than 1.5mg/L.The mirror K-99666T-B16 adopts stainless steel and PVD.
Mirrored cabinets are very heavy and shouldnot be lifted or installed by just one person.
please leave instructions for theconsumer.
Warning! Risk of personal injury and productdamage.
�
�
�
�
�
�
-
K-99666T-0/K-99666T-CS11.5mg/L
K-99666T-B16 PVD
SAFETY WARNINGS
Kohler products are precision engineered and should givecontinued superior and safe performance, provided:
1.They are installed, commissioned, operated and maintainedin accordance with the recommendations given in thisManual.
2.Periodic attention is given, as necessary, to maintain theproduct in good functional order. Recommended guidelinesare given in the section.
Carefully inspect the new fixture for any signs of damage.When installing Kohler Products, manufacturers guidelines forpower tool safety should be followed.
MAINTENANCE
1.
2.
ORDERING INFORMATION
This installation covers the following products in the POPLIN
range:
POPLIN Mirror ......................................K-99666T-0(White)
POPLIN Mirror......................K-99666T-CS1(Claret Suede)
POPLIN Mirror ......................K-99666T-B16(Galaxy Black)
...............................................K-99666T-0( )
.......................................K-99666T-CS1( )
.......................................K-99666T-B16( )
-1-
KOHLER CHINA INVESTMENT CO., LTD NO.158, JIANG CHANG SAN ROAD,JING'AN DISTRICT, SHANGHAI, PRC POST CODE: 200436
( ) 158 200436
©
©
Copyright Kohler China Investment Co., Ltd. 2016
20161295860-T01-B
-2-
ROUGHING-IN
UNIT : mm
K-99666T-0/K-99666T-CS1 K-99666T-B16
Reference Value
Kohler reserves the right to change marked dimensions without prior notice.
900
9035
35
750
Hanger of Wall Mirror Body Mirror Body
610
760
Mirror Glass
Mirror Glass
VERTICAL/HORIZONTAL INSTALLATION(For K-99666T-0/K-99666T-CS1)VERTICAL/HORIZONTAL INSTALLATION(For K-99666T-0/K-99666T-CS1)
/( )K-99666T-0/K-99666T-CS1
1.
a. 375mm
b.
a. 450mm
b.
1. Preparing the wall
Vertical Installation:
a. Measure and mark 375mm center width.
b. Mark mirror frame.
Horizontal Installation:
a. Measure and mark 450mm center width.
b. Mark mirror frame.
Horizontal Installation Vertical Installation
Wall Line
Wall Line
35
35
105
105
Wall Wall
750
620
Metal Bracket of Wall
Balance Buckle
29
4228
610
760900
20 28
1295860-T01-B
-3-
2. 105mm
35mm
35mm
105mm
2. For Vertical Installation: Mark holes 105mm below the top
frame line and 35mm away from the left and right lines.
For horizontal installation: Mark holes 35mm below the top
frame line and 105mm away from the left and right lines.
3.3. Drill holes for fixing hanged bracket and insert wall plugs
and self-tapping screws into the wall at the marked place.
Horizontal Installation
Horizontal Installation
Horizontal Hanging Mirror
Vertical Installation
Vertical Installation
Vertical Hanging Mirror
Wall
Wall
Wall
Wall Line
35
105
Plastic Wall Plug
Plastic Wall Plug
Plastic Wall Plug
Screw
Screw
Screw
4.4. Align the screw hole on the mirror with the installed screw
on the wall.Interlock to fix the mirror.
1295857Hanger of Wall
1295857Hanger of Wall
Wall
Wall Line 35
105
Plastic Wall Plug
Screw
1295860-T01-B
-4-
VERTICAL/HORIZONTAL INSTALLATION(For K-99666T-B16)VERTICAL/HORIZONTAL INSTALLATION(For K-99666T-B16)
/( )K-99666T-B16
1.
a. : 375mm
: 450mm
b.
1. Preparing the wall
a. For vertical installation: Measure and mark 375mm center
width.
For horizontal installation: Measure and mark 450mm
center width.
b. Mark mirror frame.
Horizontal Installation Vertical Installation
Wall Line
Wall Line
Wall
Wall
2. 58mm
375mm
100mm 7
28mm 375mm 1
58mm
450mm
100mm 7
28mm 450mm 1
2. For vertical installation: Mark line 58mm below the top
frame line and mark hole 375mm away from the left frame
line. Set this hole as the center hole and mark 7 holes at
the interval of 100mm. Mark one hole 28mm above the
bottom frame line and 375mm away from the left frame line.
For horizontal installation: Mark line 58mm below the top
frame line and mark hole 450mm away from the left frame
line. Set this hole as the center hole and mark 7 holes at
the interval of 100mm. Mark one hole 28mm above the
bottom frame line and 450mm away from the left frame line.
450
100 100 100
100 100 100
7 8
7 8
450 28
8
375
288
58
375
3. 8mm3. Drill 8mm holes at the marked hole positions and insert
wall plugs. Fix the metal bracket with self-tapping screw
and balance screw.
1295860-T01-B
WARNING! Risk of product damage.
1. Many cleansers contain abrasive and chemical substancewhich is not suitable for cleaning stainless steel, enamel,plating or plastic products. You may use mild cleansers orsoaps to clean the surfaces. Wipe any splashes of cleanersolutions from the surface with clean soft cloth.
2. Maintain ventilation in the bathroom, and separate the dryarea from the damp one if conditions permit. Try to openthe door and windows of the bathroom and maintain goodventilation.
3. Kohler bathroom mirrors are dealt with strict procedures fordamp-proof, whose good damp-proof function ensuresgood performance even in bathroom of huge humidity. Yetdo not splash and pour water directly on the bathroomcabinet. Make sure that the bathroom is not over dampand wipe any splashes from surfaces immediately.
4. Maintenance of mirror frame: Clean and wipe mirror frameregularly, and wipe the condensation vapor with dry andsoft cloth.
5. Ensure that electrical connections for appliances such ashead lamp is insulated ; wipe mirror surface with chamoisregularly to guarantee the persistent excellent performance.
6. If any fixtures caused by abnormal reasons, Kohler Chinacan supply paid replacement for service parts caused byabnormal reasons as shown in the service parts page inthe limited duration of warranty.
1.
2.
3.
4.
5.
6.
USER MAINTENANCEUSER MAINTENANCE
-5-
Horizontal Installation
HorizontalHanging Mirror
Vertical Installation
VerticalHanging Mirror
Wall
Wall
1299456Plastic Wall Plug
7* 8*40mm
1299456Plastic Wall Plug
7* 8*40mm
4. Z Z
90
4. Align the pre-installed Z metal bracket at the mirror back
with the Z metal bracket on the wall. Insert the balance
screw into the clip at the mirror back. Rotate the balance
screw 90 degrees with wrench to lock it.
1299457Metal Bracket of WALL
1299457Metal Bracket of WALL
Mirror
Mirror
1299455Self-Tapping Screws
7*M4*50mm
1299455Self-Tapping Screws
7*M4*50mm
1299623Balance Screw
1299623Balance Screw
Insert balance screw and rotate90 degrees with wrench to lock it.
90
Insert balance screw and rotate90 degrees with wrench to lock it.
90
1295860-T01-B