portable condensation dehumidifiers cdt 30-30s-40-40s … · 2021. 8. 4. · cdt 60 28.4 65.0 40 -...
TRANSCRIPT
PORTABLE CONDENSATION DEHUMIDIFIERS
CDT 30-30S-40-40S-60-90IDEAL FOR RENTAL AND CONSTRUCTION COMPANIES
About the Dantherm Group
Originally founded in 1954, the Dantherm Group is a European leader in portable and installed climate control solutions for a wide range of industries and uses. Based on the work of more than 500 passionate climate control experts and more than three million installations, our competence centres around Europe design and build exceptional heating, cooling, dehumidification and ventilation units that form the backbone of these climate solutions. In everything they do, they remain focused on creating healthy and comfortable climate surroundings in a sustainable, energy-efficient and cost-effective way.
Five competence centres in Denmark, Germany, Italy, Spain and UK.
DDAA
NNIISSHH EENNGGIINNEEEERRIINN
GG
S K I V E
GGEERR
MM
AANN EENNGGIINNEEEERRIINNGG
N O R D E R S T E DT
IITTAA
LLIIAANN EENNGGIINNEEEERRIINN
GG
PA S T R E N G O
SSPPAANNIISSHH EENNGGIINNEEEERRIINN
GG
VA L E N CI A
BBRRII
TTIISSHH EENNGGIINNEEEERRIINN
GG
M A L D O N
2
Our drying competence centre near Hamburg, Germany, has more than 30 years of experience in developing innovative and user-friendly dehumidifiers and drying solutions that are renowned for their sturdiness, flexibility and hassle-free operation.
Competence centre for portable drying solutions: Norderstedt, Germany.
3
Dantherm mobile CDT dehumidifiers offer quick and easy control for water damage restoration companies and the construction industry. The units are renowned for their user-friendliness, superior digital control and light yet robust design.
Damage control in case of flooding, water pipes or as a side-effect from fire fighting requires fast and efficient dehumidification. This is why water damage companies all over the world prefer the Dantherm CDT range of mobile dehumidifiers for the job. They are fast and energy-efficient. They offer precise digital settings, service information, easy fault-finding and exact specification of hour and energy consumption as well as readings of temperature and relative humidity. On top of this they are designed for optimal transport and handling.
Speed up the drying process
Dantherm CDT units are also popular within the building industry, because of their user-friendly design and mobility. They offer an effective and carefully controlled means of drying out brick or concrete walls to save both time and money without forcing the process unduly. Furthermore, the CDT units are designed to meet modern demands for low energy consumption.
High-performance and digital control
The CDT range offers capacities from 29 to 86 l/24h and a maximum working temperature of 35°C, as well as superior control of settings and operations. The digital touchscreen display puts you in quick and easy control of humidity and service status. Furthermore, hours and energy consumption can be read off the display.
New refrigerant
Fully complying with EU’s F-gas regulation, which aims to phase out usage of HFCs, all units use the eco-friendly and durable R454C refrigerant. Ideal for a broad temperature range, it is very suitable for rental and fleet equipment subjected to frequent transportation to and from different sites and offers the flexibility needed by fleet operators. R454C is mildly flammable – check local legislation for any maximum coolant storage limits.
Electronic control
The digital display with integrated humidity control, energy counter, service status and easy fault finding allows optimal dehumidification:
Benefits:
�Digital touchscreen control panel with display
�Accurate hour and kWh counter (reading)
�RH and °C monitoring (reading)
�RH setting
�Easy fault-finding
�Service monitoring function
Digital touchscreen control panel:
1. On-off switch
2. Reading of room temperature
3. Indicator for normal operation (green lamp)
4. Reading of RH value/setting of RH value
5. Indicator for full water container (yellow lamp)
6. Failure indicator (red lamp)
7. Hour counter/setting of service intervals
8. kWh counter
CDT 90 CDT 40
CDT 30SCDT 40SCDT 60
CDT 30
CDT SERIES – MOBILE DEHUMIDIFICATION
QUICK AND EASY HUMIDITY CONTROL
4
Dehumidification capacity at Operating
range humidity
Operating range
temperature
Height with handle
down
Height with handle
up Width Depth Weight Water tank
20°C/60% RH30°C/80% RH
l/24h l/24h %RH °C mm mm mm mm kg I
CDT 30 15.1 31.9 40 - 100 3 - 35 736 1016 426 506 31 7
CDT 30S 14.4 34.4 40 - 100 3 - 35 736 1016 426 506 33 7
CDT 40 18.4 43.5 40 - 100 3 - 35 823 1190 542 539 40 14
CDT 40S 18.6 43.5 40 - 100 3 - 35 823 1190 542 539 43 14
CDT 60 28.4 65.0 40 - 100 3 - 35 903 1270 542 539 46 14
CDT 90 37.0 86.5 40 - 100 3 - 35 977 977 650 593 62 -
Technical data
Easy and safe transport
The CDT units have been carefully designed for easy handling and transport. Adjustable and fixed handles ensure safe and convenient handling and operation. Big rubber wheels make the CDT’s easy to move both up and down stairs and across seemingly impassable areas. The wheels are in line with the sides of the unit to make it as narrow as possible and to protect doors and panels from unnecessary knocks. During transport and storing, the CDT units can be stacked requiring as little space as possible.
Special versions with air ducts
CDT 30S and CDT 40S are fitted with a 1kW heating element, a high pressure fan and two duct spigots allowing connection of flexible air ducts. This is particularly suitable for drying out wet wooden floors.
Optional remote monitoring
Imagine not having to go on-site and check manually if a dehumidification process has been completed. With the optional integration to Dantherm’s remote intelligent monitoring control system (IMCS), you can check the dehumidifying status in real-time from computers, smart phones and tablets no matter where you are. In addition, the solution enables users to remotely monitor and control parameters such as power on/off, alarms, temperature and power consumption.
CDT with condensate pump
The CDT dehumidifiers can be supplied with a condensate pump cassette, which is fitted instead of the water container. It pumps the condensate water into a drain. Using this condensate pump will enable your dehumidifier to run maintenance-free, you will no longer have to empty a heavy reservoir filled with water. The lifting height is max. 3m. The condensate pump cas sette is available as accessory.
Applications
�Water damage restoration
�Building drying
�Waterworks
�Dry storing
CDT 30S and CDT 40S are fitted with a 1kW heating element, a high pressure fan and two duct spigots, allowing connection of two flexible air ducts Ø100, each up to 5m long.
Big rubber wheels ensure safe and easy manoeuvring.
5 5
PORTABLE CONDENSATION DEHUMIDIFIERS
CDT 30-30S
� Electronic control display
� Water container with handles
� Automatic stop when water container is full or removed
� High capacity
� Low energy consumption
� F-gas regulation 2020 compliant refrigerant
� Strong and robust cabinet of powder-coated hot galvanized steel with active defrosting
� Epoxy-coated evaporator and condenser
� Adjustable handle
� Plastic bumpers
� Low weight
� Stackable
� Big wheels
� Can be integrated with Remote Monitoring Solution from Dantherm Group
C DT 30 - 30 S
Specifications Units CDT 30 CDT 30S
Capacity (30°C/80% RH) l/24h 31.9 34.4Capacity (20°C/60% RH) l/24h 15.1 14.4Air flow m3/h 250 350*Operating temperature range oC 3-35 3-35Operating humidity range % RH 40-100 40-100Max. power consumption W 800 1800 with heating element/800 withoutPower supply V/Hz 230/50 230/50Sound level @1m dB(A) 56 56**Refrigerant R454c R454cWater tank l 7 7Protection class IP X4 IP X4Height with handle down mm 736 736Width mm 426 426Depth mm 506 506Weight kg 31 33
The CDT 30/CDT 30S is a robust, cost-effective and energy-efficient, reliable mobile dehumidifier. It works in accordance with the condensation principle. A fan draws the humid air into the dehumidifier and through an evaporator coil. When passing through the evaporator the air is cooled down to below its dew point temperature, and its content of water vapour is condensed into water, which is collected in the water container.
CDT 30S:� Fitted with a 1kW heating element
� High pressure fan
� Two duct spigots, allowing connection of two flexible air ducts Ø100, each up to 5m long
*Measured without air ducts mounted.**Measured with air ducts mounted.
CDT 30 Back
CDT 30S Back
Optional accessories
Hygrostat with 0.4m cable, jack plug and fitting 396242
Hygrostat with 3m cable and jack plug 396241
½" draining tap and screwed hose connector 396243
Wall bracket CDT 30/CDT 30S: 396247
Cassette with built-in condensate pump CDT 30/CDT 30S:075616
Spare filterCDT 30/CDT 30S: 035862
6
Dimensions
All measurements are in mm
PORTABLE CONDENSATION DEHUMIDIFIERS
CDT 30-30S
Sheetmetal flatstate is based on Dantherm A/S process equipment and is only entended as a guide.
AND WILL BE PROTECTED BY PATENTS
table LZT 142 0001, category
ohr
03-01-2012
Material must comply to Directive 2002/95/EC of the European Parliament. (RoHS)
65610.26g
SCALE: NOT TO SCALE
351 189
351189
MATERIAL:
THICKNESS: WEIGHT:
REV. BY:
DATE:
REF.:
DATE:
PART NO
8Surface appearance according to reference BEND RADII:
ARE THE PROPERTY OF SAID COMPANY
Material must comply to Regulation (EC) No 1907/2006 of the European parliament. (REACH)
REV.:
RE
V.:
CDT 30 MK II
CDT 30 MK II
PA
RT
NO
THIS DRAWING IS FURNISHED WITH THE UNDERSTANDING THAT THE ESSENCE THERE OF WILL NOT BE REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN AUTHORIZATION BY Dantherm A/S. ALL DESIGNS ORIGINATED BY Dantherm A/S
Linear dimensions without tolerances according to DS/EN 22768-1 mediumAngular dimensions without tolerances: ± 1°
740
650
506
427
Sheetmetal flatstate is based on Dantherm A/S process equipment and is only entended as a guide.
AND WILL BE PROTECTED BY PATENTS
table LZT 142 0001, category
ohr
03-01-2012
Material must comply to Directive 2002/95/EC of the European Parliament. (RoHS)
65610.26g
SCALE: NOT TO SCALE
351 189
351189
MATERIAL:
THICKNESS: WEIGHT:
REV. BY:
DATE:
REF.:
DATE:
PART NO
8Surface appearance according to reference BEND RADII:
ARE THE PROPERTY OF SAID COMPANY
Material must comply to Regulation (EC) No 1907/2006 of the European parliament. (REACH)
REV.:
RE
V.:
CDT 30 MK II
CDT 30 MK II
PA
RT
NO
THIS DRAWING IS FURNISHED WITH THE UNDERSTANDING THAT THE ESSENCE THERE OF WILL NOT BE REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN AUTHORIZATION BY Dantherm A/S. ALL DESIGNS ORIGINATED BY Dantherm A/S
Linear dimensions without tolerances according to DS/EN 22768-1 mediumAngular dimensions without tolerances: ± 1°
740
650
506
427
Sheetmetal flatstate is based on Dantherm A/S process equipment and is only entended as a guide.
AND WILL BE PROTECTED BY PATENTS
table LZT 142 0001, category
ohr
03-01-2012
Material must comply to Directive 2002/95/EC of the European Parliament. (RoHS)
65610.26g
SCALE: NOT TO SCALE
351 189
351189
MATERIAL:
THICKNESS: WEIGHT:
REV. BY:
DATE:
REF.:
DATE:
PART NO
8Surface appearance according to reference BEND RADII:
ARE THE PROPERTY OF SAID COMPANY
Material must comply to Regulation (EC) No 1907/2006 of the European parliament. (REACH)
REV.:
RE
V.:
CDT 30 MK II
CDT 30 MK II
PA
RT
NO
THIS DRAWING IS FURNISHED WITH THE UNDERSTANDING THAT THE ESSENCE THERE OF WILL NOT BE REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN AUTHORIZATION BY Dantherm A/S. ALL DESIGNS ORIGINATED BY Dantherm A/S
Linear dimensions without tolerances according to DS/EN 22768-1 mediumAngular dimensions without tolerances: ± 1°
740
650
506
427
736
650
426
CDT 30 S MK II
CDT 30 S MK IISCALE: NOT TO SCALE
64278.09g
BEND RADII:
24-05-2012
ohr
351190
MATERIAL:
THICKNESS: WEIGHT:
REV. BY:
DATE:
REF.:
DATE:
PART NO REV.:
RE
V.:
PA
RT
NO
Material must comply to Regulation (EC) No 1907/2006 of the European parliament. (REACH)Material must comply to Directive 2002/95/EC of the European Parliament. (RoHS)
351 190
only entended as a guide.
8
Sheetmetal flatstate is based on Dantherm A/S process equipment and is
table LZT 142 0001, category Surface appearance according to reference
ARE THE PROPERTY OF SAID COMPANY AND WILL BE PROTECTED BY PATENTS
THIS DRAWING IS FURNISHED WITH THE UNDERSTANDING THAT THE ESSENCE THERE OF WILL NOT BE REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN AUTHORIZATION BY Dantherm A/S. ALL DESIGNS ORIGINATED BY Dantherm A/S
Linear dimensions without tolerances according to DS/EN 22768-1 mediumAngular dimensions without tolerances: ± 1°
750
650
506
426
CDT 30 S MK II
CDT 30 S MK IISCALE: NOT TO SCALE
64278.09g
BEND RADII:
24-05-2012
ohr
351190
MATERIAL:
THICKNESS: WEIGHT:
REV. BY:
DATE:
REF.:
DATE:
PART NO REV.:
RE
V.:
PA
RT
NO
Material must comply to Regulation (EC) No 1907/2006 of the European parliament. (REACH)Material must comply to Directive 2002/95/EC of the European Parliament. (RoHS)
351 190
only entended as a guide.
8
Sheetmetal flatstate is based on Dantherm A/S process equipment and is
table LZT 142 0001, category Surface appearance according to reference
ARE THE PROPERTY OF SAID COMPANY AND WILL BE PROTECTED BY PATENTS
THIS DRAWING IS FURNISHED WITH THE UNDERSTANDING THAT THE ESSENCE THERE OF WILL NOT BE REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN AUTHORIZATION BY Dantherm A/S. ALL DESIGNS ORIGINATED BY Dantherm A/S
Linear dimensions without tolerances according to DS/EN 22768-1 mediumAngular dimensions without tolerances: ± 1°
750
650
506
426
736
650
CDT 30
CDT 30S
506
506
The active, demand-controlled defrosting is activated through a temperature sensor on the evaporator. Defrosting is done by means of hot refrigerant being fed through the evaporator.
Performance data
0
5
10
15
20
25
30
35
40
0,00 0,20 0,40 0,60 0,80 1,00 1,20 1,40 1,60
°C
L/H
40% 60% 80%
0
5
10
15
20
25
30
35
40
0,00 0,20 0,40 0,60 0,80 1,00 1,20 1,40 1,60 1,80
°C
L/H
40% 60% 80%
CDT 30
Specific energy consumption (SEC)0.53 kWh/l at 30°C & 80% RH0.85 kWh/l at 20°C & 60% RH
CDT 30S
Specific energy consumption (SEC)0.51 kWh/l at 30°C & 80% RH0.86 kWh/l at 20°C & 60% RH
7
PORTABLE CONDENSATION DEHUMIDIFIERS
CDT 40-40S
Specifications Units CDT 40 CDT 40S
Capacity (30°C/80% RH) l/24h 43.5 43.5Capacity (20°C/60% RH) l/24h 18.4 18.6Air flow m3/h 350 560*Operating temperature range oC 3-35 3-35Operating humidity range % RH 40-100 40-100Max. power consumption W 900 1900 with heating element/900 withoutPower supply V/Hz 230/50 230/50Sound level @1m dB(A) 57 58**Refrigerant R454c R454cWater tank l 14 14Protection class IP X4 IP X4Height with handle down mm 823 823Width mm 542 542Depth mm 539 539Weight kg 40 43
� Electronic control display
� Water container with handles
� Automatic stop when water container is full or removed
� High capacity
� Low energy consumption
� F-gas regulation 2020 compliant refrigerant
� Strong and robust cabinet of powder-coated hot galvanized steel
� Epoxy-coated evaporator with active defrosting and condenser
� Adjustable handle
� Plastic bumpers
� Low weight
� Stackable
� Big wheels
� Can be integrated with Remote Monitoring Solution from Dantherm Group
The CDT 40 is a robust, cost-effective and energy-efficient, reliable mobile dehumidifier. It works in accordance with the condensation principle. A fan draws the humid air into the dehumidifier and through an evaporator coil. When passing through the evaporator the air is cooled down to below its dew point temperature, and its content of water vapour is condensed into water, which is collected in the water container.
CDT 40S:� Fitted with a 1kW heating element
� High pressure fan
� Two duct spigots, allowing connection of two flexible air ducts Ø100, each up to 5m long
Optional accessories
Hygrostat with 0.4m cable, jack plug and fitting 396242
Hygrostat with 3m cable and jack plug 396241
½" draining tap and screwed hose connector 396243
Wall bracket CDT 40/40S: 396248
Cassette with built-in condensate pump CDT 40/CDT 40S 075617
Spare filterCDT 40/CDT 40S 035973
*Measured without air ducts mounted.**Measured with air ducts mounted.
C DT 40 - 40 S
CDT 40 Back
CDT 40S Back
8
PORTABLE CONDENSATION DEHUMIDIFIERS
CDT 40-40S
Performance data
Dimensions
CDT 40
Specific energy consumption (SEC)0.44 kWh/l at 30°C & 80% RH0.78 kWh/l at 20°C & 60% RH
CDT 40S
Specific energy consumption (SEC)0.44 kWh/l at 30°C & 80% RH0.77 kWh/l at 20°C & 60% RH
Material must comply to Directive 2002/95/EC of the European Parliament. (RoHS)
CDT 40 MK II
ohr
93699.24g
BEND RADII:
24-05-2012
SCALE: NOT TO SCALE 351191
MATERIAL:
THICKNESS: WEIGHT:
REV. BY:
DATE:
REF.:
DATE:
PART NO REV.:
RE
V.:
PA
RT
NO
Material must comply to Regulation (EC) No 1907/2006 of the European parliament. (REACH) 351 191
only entended as a guide.
CDT 40 MK II
8
Sheetmetal flatstate is based on Dantherm A/S process equipment and is
table LZT 142 0001, category Surface appearance according to reference
ARE THE PROPERTY OF SAID COMPANY AND WILL BE PROTECTED BY PATENTS
THIS DRAWING IS FURNISHED WITH THE UNDERSTANDING THAT THE ESSENCE THERE OF WILL NOT BE REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN AUTHORIZATION BY Dantherm A/S. ALL DESIGNS ORIGINATED BY Dantherm A/S
Linear dimensions without tolerances according to DS/EN 22768-1 mediumAngular dimensions without tolerances: ± 1°
740
825
540
545
0
5
10
15
20
25
30
35
40
0,00 0,50 1,00 1,50 2,00 2,50
°C
L/H
40% 60% 80%
0
5
10
15
20
25
30
35
40
0,00 0,50 1,00 1,50 2,00 2,50
°C
L/H
40% 60% 80%
The active, demand-controlled defrosting is activated through a temperature sensor on the evaporator. Defrosting is done by means of hot refrigerant being fed through the evaporator.
All measurements are in mm
Material must comply to Directive 2002/95/EC of the European Parliament. (RoHS)
CDT 40 MK II
ohr
93699.24g
BEND RADII:
24-05-2012
SCALE: NOT TO SCALE 351191
MATERIAL:
THICKNESS: WEIGHT:
REV. BY:
DATE:
REF.:
DATE:
PART NO REV.:
RE
V.:
PA
RT
NO
Material must comply to Regulation (EC) No 1907/2006 of the European parliament. (REACH) 351 191
only entended as a guide.
CDT 40 MK II
8
Sheetmetal flatstate is based on Dantherm A/S process equipment and is
table LZT 142 0001, category Surface appearance according to reference
ARE THE PROPERTY OF SAID COMPANY AND WILL BE PROTECTED BY PATENTS
THIS DRAWING IS FURNISHED WITH THE UNDERSTANDING THAT THE ESSENCE THERE OF WILL NOT BE REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN AUTHORIZATION BY Dantherm A/S. ALL DESIGNS ORIGINATED BY Dantherm A/S
Linear dimensions without tolerances according to DS/EN 22768-1 mediumAngular dimensions without tolerances: ± 1°
740
825
540
545
Material must comply to Directive 2002/95/EC of the European Parliament. (RoHS)
CDT 40 MK II
ohr
93699.24g
BEND RADII:
24-05-2012
SCALE: NOT TO SCALE 351191
MATERIAL:
THICKNESS: WEIGHT:
REV. BY:
DATE:
REF.:
DATE:
PART NO REV.:
RE
V.:
PA
RT
NO
Material must comply to Regulation (EC) No 1907/2006 of the European parliament. (REACH) 351 191
only entended as a guide.
CDT 40 MK II
8
Sheetmetal flatstate is based on Dantherm A/S process equipment and is
table LZT 142 0001, category Surface appearance according to reference
ARE THE PROPERTY OF SAID COMPANY AND WILL BE PROTECTED BY PATENTS
THIS DRAWING IS FURNISHED WITH THE UNDERSTANDING THAT THE ESSENCE THERE OF WILL NOT BE REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN AUTHORIZATION BY Dantherm A/S. ALL DESIGNS ORIGINATED BY Dantherm A/S
Linear dimensions without tolerances according to DS/EN 22768-1 mediumAngular dimensions without tolerances: ± 1°
740
825
540
545
823
736
CDT 40S
539
CDT 30
542
Material must comply to Directive 2002/95/EC of the European Parliament. (RoHS)
CDT 40 S MK II
ohr
93418.55g
BEND RADII:
24-05-2012
SCALE: NOT TO SCALE 351192
MATERIAL:
THICKNESS: WEIGHT:
REV. BY:
DATE:
REF.:
DATE:
PART NO REV.:
RE
V.:
PA
RT
NO
Material must comply to Regulation (EC) No 1907/2006 of the European parliament. (REACH) 351 192
only entended as a guide.
CDT 40 S MK II
8
Sheetmetal flatstate is based on Dantherm A/S process equipment and is
table LZT 142 0001, category Surface appearance according to reference
ARE THE PROPERTY OF SAID COMPANY AND WILL BE PROTECTED BY PATENTS
THIS DRAWING IS FURNISHED WITH THE UNDERSTANDING THAT THE ESSENCE THERE OF WILL NOT BE REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN AUTHORIZATION BY Dantherm A/S. ALL DESIGNS ORIGINATED BY Dantherm A/S
Linear dimensions without tolerances according to DS/EN 22768-1 mediumAngular dimensions without tolerances: ± 1°
740
825
540
542
Material must comply to Directive 2002/95/EC of the European Parliament. (RoHS)
CDT 40 S MK II
ohr
93418.55g
BEND RADII:
24-05-2012
SCALE: NOT TO SCALE 351192
MATERIAL:
THICKNESS: WEIGHT:
REV. BY:
DATE:
REF.:
DATE:
PART NO REV.:
RE
V.:
PA
RT
NO
Material must comply to Regulation (EC) No 1907/2006 of the European parliament. (REACH) 351 192
only entended as a guide.
CDT 40 S MK II
8
Sheetmetal flatstate is based on Dantherm A/S process equipment and is
table LZT 142 0001, category Surface appearance according to reference
ARE THE PROPERTY OF SAID COMPANY AND WILL BE PROTECTED BY PATENTS
THIS DRAWING IS FURNISHED WITH THE UNDERSTANDING THAT THE ESSENCE THERE OF WILL NOT BE REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN AUTHORIZATION BY Dantherm A/S. ALL DESIGNS ORIGINATED BY Dantherm A/S
Linear dimensions without tolerances according to DS/EN 22768-1 mediumAngular dimensions without tolerances: ± 1°
740
825
540
542
823
736
539
9
PORTABLE CONDENSATION DEHUMIDIFIERS
CDT 60
� Electronic control display
� Water container with handles
� Automatic stop when water container is full or removed
� High capacity
� Low energy consumption
� F-gas regulation 2020 compliant refrigerant
� Strong and robust cabinet of powder-coated hot galvanized steel
� Epoxy-coated evaporator with active defrosting and condenser
� Adjustable handle
� Plastic bumpers
� Low weight
� Stackable
� Big wheels
� Can be integrated with Remote Monitoring Solution from Dantherm Group
The CDT 60 is a robust, cost-effective and energy-efficient, reliable mobile dehumidifier. It works in accordance with the condensation principle. A fan draws the humid air into the dehumidifier and through an evaporator coil. When passing through the evaporator the air is cooled down to below its dew point temperature, and its content of water vapour is condensed into water, which is collected in the water container.
Optional accessories
Hygrostat with 0.4m cable, jack plug and fitting 396242
Hygrostat with 3m cable and jack plug 396241
½" draining tap and screwed hose connector 396243
Wall bracket 396248
Cassette with built-in condensate pump 075617
Spare filter 036452
The active, demand-controlled defrosting is activated through a temperature sensor on the evaporator. Defrosting is done by means of hot refrigerant being fed through the evaporator.
C DT 60
10
Specifications Units CDT 60
Capacity (30°C/80% RH) l/24h 65.0Capacity (20°C/60% RH) l/24h 28.4Air flow m3/h 725Operating temperature range oC 3-35Operating humidity range % RH 40-100Max. power consumption W 1300Power supply V/Hz 230/50Sound level @1m dB(A) 57Refrigerant R454cWater tank l 14Protection class IP X4Height with handle down mm 903Width mm 542Depth mm 539Weight kg 46
Performance data
All measurements are in mm
CDT 60
Specific energy consumption (SEC)0.42 kWh/l at 30°C & 80% RH0.75 kWh/l at 20°C & 60% RH
PORTABLE CONDENSATION DEHUMIDIFIERS
CDT 60
Material must comply to Directive 2002/95/EC of the European Parliament. (RoHS)only entended as a guide.
CDT 60 MK II
99141.12g
BEND RADII:
CDT 60 MK II
ohr
351193
MATERIAL:
THICKNESS: WEIGHT:
REV. BY:
DATE:
REF.:
DATE:
PART NO REV.:
RE
V.:
PA
RT
NO
Material must comply to Regulation (EC) No 1907/2006 of the European parliament. (REACH)
25-05-2012
SCALE: NOT TO SCALE
351 193
8
Sheetmetal flatstate is based on Dantherm A/S process equipment and is
table LZT 142 0001, category Surface appearance according to reference
ARE THE PROPERTY OF SAID COMPANY AND WILL BE PROTECTED BY PATENTS
THIS DRAWING IS FURNISHED WITH THE UNDERSTANDING THAT THE ESSENCE THERE OF WILL NOT BE REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN AUTHORIZATION BY Dantherm A/S. ALL DESIGNS ORIGINATED BY Dantherm A/S
Linear dimensions without tolerances according to DS/EN 22768-1 mediumAngular dimensions without tolerances: ± 1°
820
905
540
542
Material must comply to Directive 2002/95/EC of the European Parliament. (RoHS)only entended as a guide.
CDT 60 MK II
99141.12g
BEND RADII:
CDT 60 MK II
ohr
351193
MATERIAL:
THICKNESS: WEIGHT:
REV. BY:
DATE:
REF.:
DATE:
PART NO REV.:
RE
V.:
PA
RT
NO
Material must comply to Regulation (EC) No 1907/2006 of the European parliament. (REACH)
25-05-2012
SCALE: NOT TO SCALE
351 193
8
Sheetmetal flatstate is based on Dantherm A/S process equipment and is
table LZT 142 0001, category Surface appearance according to reference
ARE THE PROPERTY OF SAID COMPANY AND WILL BE PROTECTED BY PATENTS
THIS DRAWING IS FURNISHED WITH THE UNDERSTANDING THAT THE ESSENCE THERE OF WILL NOT BE REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN AUTHORIZATION BY Dantherm A/S. ALL DESIGNS ORIGINATED BY Dantherm A/S
Linear dimensions without tolerances according to DS/EN 22768-1 mediumAngular dimensions without tolerances: ± 1°
820
905
540
542
Material must comply to Directive 2002/95/EC of the European Parliament. (RoHS)only entended as a guide.
CDT 60 MK II
99141.12g
BEND RADII:
CDT 60 MK II
ohr
351193
MATERIAL:
THICKNESS: WEIGHT:
REV. BY:
DATE:
REF.:
DATE:
PART NO REV.:
RE
V.:
PA
RT
NO
Material must comply to Regulation (EC) No 1907/2006 of the European parliament. (REACH)
25-05-2012
SCALE: NOT TO SCALE
351 193
8
Sheetmetal flatstate is based on Dantherm A/S process equipment and is
table LZT 142 0001, category Surface appearance according to reference
ARE THE PROPERTY OF SAID COMPANY AND WILL BE PROTECTED BY PATENTS
THIS DRAWING IS FURNISHED WITH THE UNDERSTANDING THAT THE ESSENCE THERE OF WILL NOT BE REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN AUTHORIZATION BY Dantherm A/S. ALL DESIGNS ORIGINATED BY Dantherm A/S
Linear dimensions without tolerances according to DS/EN 22768-1 mediumAngular dimensions without tolerances: ± 1°
820
905
540
54290
3
816
539
0
5
10
15
20
25
30
35
40
0,00 0,50 1,00 1,50 2,00 2,50 3,00 3,50
°C
L/H
40% 60% 80%
Dimensions
11
PORTABLE CONDENSATION DEHUMIDIFIERS
CDT 90
� Electronic control display
� Water container with handles
� Automatic stop when water container is full or removed
� High capacity
� Low energy consumption
� F-gas regulation 2020 compliant refrigerant
� Strong and robust cabinet of powder-coated hot galvanized steel
� Epoxy-coated evaporator with active defrosting and condenser
� Adjustable handle
� Plastic bumpers
� Low weight
� Big wheels
� Can be integrated with Remote Monitoring Solution from Dantherm Group
The CDT 90 is a robust, cost-effective and energy-efficient, reliable mobile dehumidifier. It works in accordance with the condensation principle. A fan draws the humid air into the dehumidifier and through an evaporator coil. When passing through the evaporator the air is cooled down to below its dew point temperature, and its content of water vapour is condensed into water, which is collected in the water container.
Optional accessories
Hygrostat with 0.4m cable, jack plug and fitting 396242
Hygrostat with 3m cable and jack plug 396241
½" draining tap and screwed hose connector 396243
Spare filter 036849
The active, demand-controlled defrosting is activated through a temperature sensor on the evaporator. Defrosting is done by means of hot refrigerant being fed through the evaporator.
C DT 90
12 12
Specifications Units CDT 90
Capacity (30°C/80% RH) l/24h 86.5Capacity (20°C/60% RH) l/24h 37Air flow m3/h 1000Operating temperature range oC 3-35Operating humidity range % RH 40-100Max. power consumption W 1900Power supply V/Hz 230/50Sound level @1m dB(A) 57Refrigerant R454cWater tank l drain outlet for connection to a ½” water hoseProtection class IP X4Height with handle down mm 977Width mm 650Depth mm 593Weight kg 62
Performance data
All measurements are in mm
CDT 90
Specific energy consumption (SEC)0.48 kWh/l at 30°C & 80% RH0.81 kWh/l at 20°C & 60% RH
PORTABLE CONDENSATION DEHUMIDIFIERS
CDT 90
ohr
Material must comply to Directive 2002/95/EC of the European Parliament. (RoHS)
CDT 90 MK II
355066.95g
BEND RADII:
23-12-2011
SCALE: NOT TO SCALE 351194
MATERIAL:
THICKNESS: WEIGHT:
REV. BY:
DATE:
REF.:
DATE:
PART NO REV.:
RE
V.:
PA
RT
NO
Material must comply to Regulation (EC) No 1907/2006 of the European parliament. (REACH) 351 194
only entended as a guide.
CDT 90 MK II
8
Sheetmetal flatstate is based on Dantherm A/S process equipment and is
table LZT 142 0001, category Surface appearance according to reference
ARE THE PROPERTY OF SAID COMPANY AND WILL BE PROTECTED BY PATENTS
THIS DRAWING IS FURNISHED WITH THE UNDERSTANDING THAT THE ESSENCE THERE OF WILL NOT BE REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN AUTHORIZATION BY Dantherm A/S. ALL DESIGNS ORIGINATED BY Dantherm A/S
Linear dimensions without tolerances according to DS/EN 22768-1 mediumAngular dimensions without tolerances: ± 1°
895
980
593
650
ohr
Material must comply to Directive 2002/95/EC of the European Parliament. (RoHS)
CDT 90 MK II
355066.95g
BEND RADII:
23-12-2011
SCALE: NOT TO SCALE 351194
MATERIAL:
THICKNESS: WEIGHT:
REV. BY:
DATE:
REF.:
DATE:
PART NO REV.:
RE
V.:
PA
RT
NO
Material must comply to Regulation (EC) No 1907/2006 of the European parliament. (REACH) 351 194
only entended as a guide.
CDT 90 MK II
8
Sheetmetal flatstate is based on Dantherm A/S process equipment and is
table LZT 142 0001, category Surface appearance according to reference
ARE THE PROPERTY OF SAID COMPANY AND WILL BE PROTECTED BY PATENTS
THIS DRAWING IS FURNISHED WITH THE UNDERSTANDING THAT THE ESSENCE THERE OF WILL NOT BE REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN AUTHORIZATION BY Dantherm A/S. ALL DESIGNS ORIGINATED BY Dantherm A/S
Linear dimensions without tolerances according to DS/EN 22768-1 mediumAngular dimensions without tolerances: ± 1°
895
980
593
650
ohr
Material must comply to Directive 2002/95/EC of the European Parliament. (RoHS)
CDT 90 MK II
355066.95g
BEND RADII:
23-12-2011
SCALE: NOT TO SCALE 351194
MATERIAL:
THICKNESS: WEIGHT:
REV. BY:
DATE:
REF.:
DATE:
PART NO REV.:
RE
V.:
PA
RT
NO
Material must comply to Regulation (EC) No 1907/2006 of the European parliament. (REACH) 351 194
only entended as a guide.
CDT 90 MK II
8
Sheetmetal flatstate is based on Dantherm A/S process equipment and is
table LZT 142 0001, category Surface appearance according to reference
ARE THE PROPERTY OF SAID COMPANY AND WILL BE PROTECTED BY PATENTS
THIS DRAWING IS FURNISHED WITH THE UNDERSTANDING THAT THE ESSENCE THERE OF WILL NOT BE REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN AUTHORIZATION BY Dantherm A/S. ALL DESIGNS ORIGINATED BY Dantherm A/S
Linear dimensions without tolerances according to DS/EN 22768-1 mediumAngular dimensions without tolerances: ± 1°
895
980
593
650
977
894
593
0
5
10
15
20
25
30
35
40
0,00 0,50 1,00 1,50 2,00 2,50 3,00 3,50 4,00 4,50 5,00
°C
L/H
40% 60% 80%
Dimensions
13
ACCESSORIES
CDT 30-30S-40-40S-60-90
Illustration Accessory Products Code
Hygrostat with 0.4m cable, jack plug and fitting
Hygrostat with 3m cable and jack plug
ALL396242396241
½” draining tap and screwed hose connector ALL 396243
Intelligent Remote Monitoring and Control System (IMCS) ALL
Please contact sales for more information
Condensate pump in a cassette CDT 30/30SCDT 40/40S/60
075616075617
Wall bracket CDT 30/30SCDT 40/40S/60
396247396248
Spare filter
CDT 30/CDT 30SCDT 40/CDT 40SCDT 60CDT 90
035862035973036452036849
14
Dealer:
KEEP UPDATEDFOLLOW US ON:
danthermgroup.com
May
202
1
Dantherm A/SMarienlystvej 65DK-7800 SkiveDenmarkt. +45 96 14 37 00
Dantherm Ltd.Unit 12, Galliford RoadMaldon CM9 4XDUnited Kingdomt. +44 (0)1621 856611
Dantherm GmbHOststraße 14822844 NorderstedtGermanyt. +49 40 526 8790
Dantherm S.p.A.Via Gardesana 1137010 Pastrengo (VR)Italyt. +39 045 6770533
Dantherm Sp. z o.o.ul. Magazynowa 5a62-023 GądkiPolandt. +48 61 65 44 000
Dantherm SP S.A.C/Calabozos 6(Polígono Industrial)28108 Alcobendas, MadridSpaint. +34 91 661 45 00
Dantherm SAS23 rue Eugène Henaff 69694 Vénissieux CedexFrancet. +33 4 78 47 11 11
Dantherm ASLøkkeåsveien 263138 SkallestadNorwayt. +47 33 35 16 00
Dantherm ABFridhemsvägen 3602 13 NorrköpingSwedent. +46 (0)11 19 30 40
Dantherm LLCTransportnaya 22/2142800, StupinoMoscowRussiat. +7 (495) 642 444 8
MCS ChinaUnit 2B, No. 512Yunchuan RoadBaoshang, Shanghai, 201906Chinat. +8621 61486668
Termigo S.LCarrer dels Velluters, 18-246980 Paterna, ValenciaSpaint. +34 961 524 866
AirCenter AGTäfernstrasse 14CH-5405 Baden DättwilSwitzerlandt. +41 43 500 00 50
Heylo GmbHIm Finigen 928832 AchimGermanyt. +49 4202 97550
SET Energietechnik GmbHAugust-Blessing-Straße 5Hemmingen, 71282Germanyt. +49 7150 94540