Solutions & Expertise for the cable industry

More than 30 years of experience in the cable industry allows AESA Cortaillod to offer you the benefits of its skills and complete solutions for testing, quality control and process improvement. Acknowledged leader within the sector, AESA is here to help you run your business with maximum efficiency by offering you only the most productive solutions.

www.aesa-cortaillod.com

TELECOM cable testing solutions Ensure the products quality at any step of the production process

LAN cable testing solutions xDSL and TELEPHONE cable testing solutions COAX cable testing solutions

ENERGY cable testing solutions Remain competitive in controlling your raw material consumption

ON-LINE measuring equipment OFF-LINE measuring equipment Portable and customised solutions

QUALITY & PRODUCTION data management system Pilot your production to deliver higher quality at lower cost

Quality data acquisition, evaluation and traceability Process data acquisition evaluation and traceability Statistic process control (SPC) and process improvements

CUSTOMER SERVICES Never feel alone, we are more than just a supplier

ISO 17025 certification for products and standards Training courses, repair and maintenance Calibrated standards and service tools

AESA Cortaillod is worldwide distributed by a large commercial partners network

OUR MISSION

enhance quality management and production performance of electrical wires and cables

PORTABLE devices

QUALITY & PRODUCTION data management system

CUSTOMER SERVICES

CIQ 3.0 family

ISO 17025

Certified laboratory for equipment and standards

SERVICES

Training courses provided at AESA or on-site

Maintenance and repair provided at AESA, on-line or on-site

Development continuous adaptations to meet with the cable industry requirements

Consulting customised development or support

AS98 optical fibre alignment device

3216 continuity tester

3432 fault locator 3921 converting megohmmeter

4735 high voltage generator

QDM Quality Data Management

for the acquisition and the treatment of data related to the measurement of the cable specifi-cations

CIQ 3.0 is a complete and structured software for the quality and the production management in the electri-cal cable and wire industry.

It allows the capture, the networking, the use and the archiving of data related to the manufacturing process-es and measurements for the quality control.

It interconnects the different quality islands, the pro-duction, the office and more.

It has been specially developed with and for the specific wire and cable industry.

SoftDLC Data Logger Control

for the continuous acquisition, the treatment and visualisation of data related to the parame-ters and events recorded during the production

OptiTest

Stand-alone version of QDM specially designed and simplified for the AESA test equipment.

Adds-on

Different modules are available to allow specific jobs like : Defect recording and evaluation Type validation and labo specific tests Automatic mechanical cycling tests Scattered tests (heating cabinets,...) Other specific modules on request

Tell us your problem, together we will find the solution !

www.aesa-cortaillod.com

9000 LF standard kit

STANDARDS

Calibrated kits and control boxes for maintenance and repair

from 100 to 10’000 VDC

displays directly MΩ.Km locates open and short faults until 20km

9800 HF standard kit

aesa1009

TELECOM cable testing solutions

ENERGY cable testing solutions

4 pairs 2 GHz system

VEGA for LAN cables

from 4 to 28 pairs from 350 MHz to 2 GHz for UTP, FTP, STP, ISTP and hybrid cables for cables CAT 5, 5E, 6, 6A, 7 & 7A

Different connecting frames can be integrated in one sole system, this allowing building-up a unit which matches all possible cable designs and respective perfor-mances. Our LAN cable testers are officially certified according to ISO 17025

The VEGA cable tester family can be equipped with a wide range of options such as : Coaxial cable measurements LCL / LCTL testing facility Transfer Impedance tests Alien crosstalk measurements etc

PHOENIX for xDSL cables

28 pairs 1 GHz system

These measuring systems are designed to measure the low & high frequency parameters.

Desktop system : 4 pairs 40 MHz

HELIOS for telephone cables

from 8 to 104 pairs up to 10 MHz

SCORPIUS for COAX cables

from 1 to 8 cables up to 6 GHz standard impedance 50 & 75Ω

104 pairs 10 MHz system

PUMA for automatic LF measurements

LYNX for manual RCKE measurements

GAIA for LF/HV/IR tests

from 8 to 104 cables up to 6 KV DC

This family of test systems is designed to measure the low frequency parameters as well as the dielectric strength and the insulation resistance on multi-pair cables.

Automatic RCKE tester with con-necting frames for measuring low frequency parameters on pairs/quads, subassemblies and cables at intermediate or the final test platform.

Manual RCKE tester with touch screen for low frequency measurements on pairs & quads at the intermediate test platform.

Test system designed to mea-sure high frequency parame-ters. Scorpius is available in different versions according to the frequency range, the num-ber of pairs / conductors or the standard impedance as exam-ple.

719x wire resistance meters for OFF-LINE measurements

This rugged precision instrument is equally at home on the shop-floor and in the laboratory, for single core, solid and stranded copper and aluminium conductors

Measured length : 1 meter

Accuracy : ± 0.1 % Automatic temperature compensation

Delivered with an official calibration certificate according to ISO 17025

Easy to operate

from 2.5 to 1800 mm2 copper from 2.5 to 300 mm2 aluminium

813x resistance & cross section measurers for ON-LINE or OFF-LINE measurements

The 8130 is dedicated to measure the resistance of power cable conductors directly on the stranding machine. It therefore avoids destructive sample testing.. Delivered with an official calibration certificate according to ISO 17025

from 2.5 to 1800 mm2 copper from 2.5 to 1200 mm2 aluminium

from 2.5 to 630 mm2 copper from 2.5 to 300 mm2 aluminium

Combined system : 50 pairs 40 MHz + 4 pairs 1.2 GHz + 1x coax

from 4 to 112 pairs from 20 MHz to 100 MHz

These measuring systems are designed to measure the low & high frequency parameters.

LF + HV 6KV system

8 pairs 3 GHz system

7195 resistance meter

Up to 100mm²

Up to 630 mm²

7198 resistance meter

8136 The compact version

8135 The aluminium version

8134 The standard version

Cable tensioner

High accuracy

Easy to operate

Automatic temperature compensation To be used with copper and aluminium

Direct reading in mΩ/m

Direct reading in % of the wasted raw material

AESA SA Chemin de la Plaine 7 CH-2013 Colombier (Switzerland) Telephone +41 32 841 5177 aesa@aesa-cortaillod.com

AESA GmbH TBG Technologiepark Bergisch Gladbach D-51429 Bergisch-Gladbach (Germany) Telephone +49 2204 767580 aesagmbh@aesa-cortaillod.com

for off-line measurements