Portable Evaporative Air Cooler

INSTRUCTION MANUALRead and save these instructions before use

Model: CL30XCWith Remotewww.ushainternational.com

This page is intentionally left blank

SECTION PAGE

1. THANK YOU .........................................................................................................2. USER TIPS ...........................................................................................................

4. PARTS DESCRIPTION ........................................................................................5. USE & OPERATION .............................................................................................

6. CLEANING & MAINTENANCE .............................................................................7. TROUBLESHOOTING GUIDE .............................................................................8. TECHNICAL SPECIFICATIONS ...........................................................................9. ELECTRICAL WIRING DIAGRAM ........................................................................

23578

14161818

INDEX

1

Read all instructions carefully before setting up and operating the unit, and please keep this instruction manual for future reference. This manual is designed to provide you withimportant information needed to setup, operate, maintain, and troubleshoot your cooler.Failure to follow these instructions may damage and/or impair its operation and void thewarranty.

Fill Water ......................................................... .................... ...............

Function Buttons .................................................................................................Room Cooling and Humidifying ...........................................................................Remote Control ...................................................................................................

.... ............ 13

Control Panel ..................................................................................................... 89

1112

3. SAFETY INSTRUCTIONS ....................................................................................

2

THANK YOU

Dear Customer,

Congratulations!

You are now the proud owner of an Usha Honeywell Evaporative Air Cooler.

Innovatively designed, using only the highest quality material and components, your Usha Honeywell Air Cooler is designed for years of trouble free performance.

Please read this Instruction Manual carefully before using the product and keep it carefully after reading for future reference.

For optimum cooling performance from your unit, please �ll the tank with water & ice, if available, to increase the cooling power.

Best Wishes

USER TIPS

3

Pump

Water

Honeycomb Cooling Media

Evaporative Air Cooling Mechanism

Warm and

dry air

Cold and

humid air

Evaporative air cooling is the natural way of cooling, similar to a breeze blowing across a lake. Thisbreeze drops the temperature and has a relaxing cooling effect.

The evaporative air cooler cools the air by means of the evaporation of water. When waterevaporates into the air, the result is a mixture of air and water molecules. This chemical changerequires heat which is taken from the water molecules, resulting in cooler air propelled from theunit.

NATURAL ENERG Y EFFICIENT COOLING ..

The recommended maximum relative humidity level is 60% orless, which allows a noticeable temperature decrease. Thetemperature decrease will be greater in drier climates becausehigher evaporation occurs when humidity is low.

NOTE

4

USER TIPS

The evaporative air cooler should not be used in enclosedspaces. It must be kept level and there must be water in thewater tank. The room should have doors and windows opened to allow free air �ow. The evaporative air cooler works best when placed near an open window, so that outside air is drawn into the evaporative air cooler, the air circulates in the room, then exits via the door. The maximum cooling e�ect is felt when a person is in the �ow of air coming out of the evaporative air cooler.

The evaporative air cooler can also be used to humidify dry airduring cool weather. To be used for humidi�cation the windows and doors should be closed to allow the humidi�ed air to accumu-late. The evaporative air cooler is not an air conditioner as it does not use a compressor or refrigerant gas.

When the product is used for the �rst time the Honeycomb cooling media will have an odour which will dissipate within a weekof initial use.

Room with open windows & door

Room with closed windows & door

READ AND SAVE THESE INSTRUCTIONS:

When using electrical appliances, basic safety precautions should always be followed:

SAFE TY RU LES

230 V AC, 50 Hz

SHOCK HAZARD

Always unplug the product before re�lling the water tank.•Always unplug the appliance from the power source beforecleaning, servicing or relocating the unit.

•

Remove the power cord from the electrical receptacle bygrasping and pulling on the power cord plug-end only, neverpull the cord.

•

DO NOT use the product in areas where gasoline, paint orother �ammable goods and objects are stored.

•

WATER LEVEL INDICATOR

When using the ''COOL'' setting, please check the water tankto ensure it is full. Operation of this unit on the ''COOL'' setting with an empty tank may result in damage to the water pump.

•

5

DO NOT run power cord under carpeting, or cover it withrugs or runners. Keep the cord away from areas where itmay be tripped over.

•

• Your unit runs on 230 V AC, 50 Hz current. Check the household voltage to ensure it matches the appliance's rate speci�cation.

• Before operating the product remove it from its packaging and check it is in good condition.

• DO NOT operate any product with a damaged cord or plug.We recommend not to use an extension cord with thisappliance.

may cause motor damage.

This appliance is not intended for use by persons (includingchildren or elderly) with reduced physical, sensory or mentalcapabilities, or lack of experience and knowledge, unless theyhave been given supervision or instruction concerning use ofthe appliance by a person responsible for their safety.

•When the unit is not in use always store in a dry area.•

This product is not intended for use in wet or damp locations.•

DO NOT let children play with this appliance, packaging orplastic bags.

•

DO NOT leave the appliance operating unattended for anyextended period of time.

•

DO NOT operate with the Honeycomb media removed as thiswill overload and damage the motor.

•

DO NOT insert or allow objects to enter any ventilation orexhaust opening as this may damage the product and couldcause an electrical shock or fire.

•

DO NOT attempt to repair or adjust any electrical or mechanicalfunctions of the cooler, as this may void the warranty.

•

DO NOT cover the air inlet or outlet on the appliance as this •

FLOOR LEVEL

If the unit is damaged or it malfunctions, do not continue tooperate it. Refer to the troubleshooting section and /or pleaseseek professional advice.

•

Place the unit on a level floor.•

Never locate the product where it may fall into a bathtub orother water container. DO NOT use in bathrooms or outdoors.

•

6

Always grip the side handles to move the unit.•

SAFETY INSTRUC TIONS

7

6

Control PanelHandleLouversLeft Side PanelWater TankPower CordPower PlugCasters

Back GrillFront PanelWater Level IndicatorRemote Control LatchRight Side PanelWater Fill DoorDrainage Tube / Cap

12345678

Ice Compartment Lid9

1011121314151617

Water Regulator Remote

1819

PART S DES CRIPT ION

1

11

1217

14

15

16

13

2

43

5

8

918

10

ACCESSORIES:

Remote Control ( Batteries not included)

7

8

CONTROL PANEL

USE & OPERATION

Low water level in tank

Cool

Fan operating

Low speed

Medium speed

High speed

Swing

Time delay set

COOL

FAN

SLEEPTIMER

SWING

Icons on LCD

Sleep

USE & OPERATION

9

FUNCTION BUTTONS

POWERPress the 'POWER' button to turn the unit on. To turn the unitoff, press the button again. The cooler will start automatically atmedium speed. After a few seconds the speed will switch to low.

FAN / SPEEDPress the 'FAN OR SPEED' button repeatedly and the speedwill change. The indicator light will show the selected speed.

COOLTo begin cooling the desired area press the ''COOL’'button. The indicator light will come on and the waterpump will operate. You will feel the cooler air after theHoneycomb media is completely wet.

High Medium Low Sleep

COOL

SPEED

USE & OPE RATIO N

10

SLEEPWhen sleep is selected air�ow will randomly vary betweenHigh, Medium and Low.

TIMERPress the ''TIMER'' button until the indicator light comes on toyour desired timer. Once the set time has passed, the unit willautomatically shut o�. The Timer function allows you to programthe unit for up to 8 hours of use.

TIMER

SWINGPress the ''SWING'' button. The indicator light will come onand the louvers will begin to move from right to left automatically. Manually adjust the horizontal louvers to change vertical air�ow.

LOUVERS MOVEMENT

SLEEP

SWING

USE & OPERATION

11

ROOM COOLING & HUMIDIFYING

When the Water Regulator is set to ''MIN'', the water pumpdistributes minimal amount of water to the Honeycomb media.This results in less water evaporation and reduces coolinge�ect.

COOLER LOCATION

Place the cooler in front of an open door or window. Ensure thatthere is adequate cross - ventillation in the room by leaving a door or window open opposite from the cooler.

Following these rules will ensure your cooler will work as e�ectively as possible.

When the Water Regulator is set to ''MAX'', the water pumpdistributes the maximum amount of water to the Honeycombmedia. This results in maximum water evaporation and thecooling performance improves.

Water Regulator

USE & OPERATION

12

REMOTE CONTROL

Power: On / OffSpeed: Low / Medium / HighCool/Fan: Controls cooling or fan optionSwing: Controls the motion of the louversTimer:SLEEP : Turns on the sleep mode, to vary the fan speed randomly.

Controls timer function for automatic shut off

NOTE

Please open the battery compartment at the back of the remote control and insert two new AAA dry cell batteries. Care must be taken to insert the batteries according to the correct polarity (+ / –) markings shown inside the battery compartment.Always point the remote control signal transmitter towards the unit when operating.Make sure that the signal path is not obstructed.Remove the batteries if the unit is not going to be used for an extended period of time.Do not drop the remote control.

•

•

••

•

SLEEP

TIMER

SPEED

POWER

COOL

SWING

13

USE & OPERATION

FILL WATER

Open the Water Fill Door located below the Remote ControlHolder on the unit. The water tank of the unit holds up to 30 litresof water.

Water level display window is located on the front of the unit.Refill the water tank when water level is low. Do not fill waterabove the Max water level mark. Check water level in the tankbefore running the ''COOL'' function. Please be sure water inthe tank is always above minimum water level mark. Runningthe unit with inadequate water may cause pump failure. If ice isavailable you may add ice in the top compartment to enhancethe cooling performance.

CAUTION

Unplug from power when refilling.

Water Fill Door

Top Ice Loading Compartment

14

WARNING

CLEA NING & MA INTEN ANCE

Before cleaning the unit, switch it to the ''o�'' position andremove the plug from the power socket. To clean the outside, use a damp cloth to remove dirt anddust. Never use corrosive elements or any chemicals to cleanthis product. When the product is not in use, store the unit in a dry placeout of direct sunlight.

DRAINING AND CLEANING THE WATER TANK

•

•

•

•

•

•

••

•••

•

Latch

Water Pick Up Tube

DrainageTube / Cap

Turn the power “o�” and disconnect the air cooler from the power supply.Move the unit to a location where water can be drained. Remove the cap from the drainage tube and allow the tank to empty (see parts description on page 7).Once the tank is empty, unlock the latches on both sides and lift o� the cooler top section as shown in the �gure and place it vertically on the �oor. Be careful not to bend the water pickup tube that hangs below the unit. Re�ll the water tank with clean water and drain it completely.Clean the water tank with detergent or a damp cloth and rinse it thoroughly.Place the unit top carefully on the tank and lock the latches.Re�ll the water tank with clean water, up to the maximum level.The air cooler is now ready to be used. This cleaning process should be repeated weekly to maintain the integrity of the unit and to remove particles �ltered from the air.

15

CLEANING & MAINTENANCE

CLEANING THE FILTER AND HONEYCOMBThe appliance is supplied with carbon �lter & honeycombcooling media.

•

Always keep the Carbon �lter clean. You can wash theCarbon �lter at least twice a year or whenever you feelnecessary.

•

The carbon �lter and honeycomb media are located inside theback panel. Open the back panel by using a star screw driverto clean or replace the carbon �lter or honeycomb media. It isrecommended that the carbon �lter and honeycomb media bereplaced every year, depending on use and environment.

•

Draining the water reservoir and re�lling with fresh water atleast once a week will greatly reduce mineral deposits in thepads and help to extend the life of Honeycomb cooling media.

•

Do not run the unit in COOL mode with stale water in the tank.You must empty the water tank and re�ll with fresh water,especially if the tank has not been cleaned in a long time.

•

The cleaning frequency for the Honeycomb media dependson local air and water conditions. In areas where the mineralcontent of water is high, mineral deposits may build up on thehoneycomb cooling media and restrict air �ow. Draining thewater reservoir and re�lling with fresh water at least once aweek will help reduce mineral deposits. If mineral depositsremain on the Honeycomb media, the media should beremoved and washed under fresh water. The media should becleaned every two months or sooner, depending on your needs.

•

For best results allow the honeycomb cooling media to dryafter each use by turning o� the cool function 15 minutesbefore turning the unit o�.

•

Open Screws

Back Panel

Honeycomb Carbon Filter

TROUBLESHOOTING GUIDE

No discharge of air Cord is not plugged in. Make sure power cord is pluggedin and the supply switch in ON.

Power is not ON. Try to turn the unit ON bypressing buttons on controlpanel or remote control.

Not Cooling / Unit ismaking noise

Pump is not turned ON. Turn on COOL function fromremote or control panel.

Low or no water in tank,when COOL is selected.

Re�ll water tank.

Odour omission New Unit. When the unit is used for the�rst time, the Honeycombcooling media will have anodour, which will dissipatewithin a week of initial use.

Old Unit. There may be an algae issue,Replace the honeycomb coolingmedia. Contact service centre.

Damaged Pump or Calciumdeposits on blower.

Contact service centre.

PROBLEM POSSIBLE CAUSE SOLUTION

16

TROUBLESHOOTING GUIDE

The unit does not respond Remote control batteries. Check batteries, Replace ifneeded. Try to operate usingthe control panel.

Damaged PCB Try with remote control. If theunit responds, PCB boardfasteners may be loose.Contact service centre.

If neither remote control norcontrol panel works, PCBboard may be damaged.Contact service centre.

PROBLEM POSSIBLE CAUSE SOLUTION

17

Cooler not operating initially Cord is not plugged in.

Incorrect voltage

Make sure power cord is pluggedin and the supply switch is ON

Power outlet or faulty power supply

Check the power outlet. Check the power supply

Check that teh power supply is the same as speci�ed on therating label.

MODEL NO. CL30XC

230V AC50Hz

252 Watts25 Litres

Honeycomb460 x 355 x 860 mm

13 Kg

VoltageFrequencyWattageWater Tan k CapacityCooling MediaProduct Dimension (L) X (W) X (H)Net Weight

TECH NICAL SPEC IFICA TION S

ELECTRICAL WIRING DIAGRAM

Float switch

Receiver

WH WH

JN5

JN4

Swing motor

Chassis Ground

20uF/250V

JN3BL(Lo)YL(Med)WH(Hi)BL(Com)

WH

YLBL

Control

Water tank

BL

WH

Power cord120V ~60Hz

EARTH

ShellDOS

WH BL

GR

JN2

GR

WHBL

JN1

ON/OFF

18

This appliance is warranted for one year against all manufacturing defects from the date of sale. In the event of any complaint, please contact your nearest Company Service Centre or call at our Toll Free no: 1800-1033-111

This Warranty is valid only when…1. The appliance has not been opened or tempered with, by any unauthorized person.2. The warranty card or cash memo duly signed by the authorized dealer are presented with the complaint.3. The appliance has been installed, used and maintained in accordance with the instructional manual.

This Warranty does not apply for…1. Damages due to chipping, peeling, plating and denting.2. Breakage or damage to components made out of Bakelite, Urea, ABS, SAN and such plastic, materials, rubber parts and cord.3. Normal wear and tear of parts.4. Damage resulting from accidents, mishandling or negligence on part of the customer.

Liability for consequential loss or damage is neither accepted nor implied.

S.NO: _________________________________________________________________CASH MEMO ____________________________________________________________DATE: __________________________________________________________________DEALER’S NAME AND ADDRESS: _____________________________________________________________________________________________________________________________________________________________________________________________OWNER’S NAME & ADDRESS: __________________________________________________________________________________________________________________________

SERVICE AND WARRANTY

SERVICE AND WARRANTY

17