portavant 120 product list

Smooth cushioning, gentle closingAUTOCLOSE DESIGN SELECTCOMFORTSTOP

InnovatIon!

Portavant Glass fittings with logic

General notes:

Complete sets:The complete sets include the following number of ComforT SToP and AUTo CLoSE cushioning and self-closing mechanisms, in line with your requirements, and they are identified by the following icons: - 1 per sash for cushioning on one end- 2 per sash for cushioning on both ends- Without cushioning.

We deliver the profiles for the complete sets together in shock resistant cardboard packaging.

Profiles:If you sent us your order structured glass sliding door by glass sliding door, the track profiles and cover profiles will be packed, belonging to each sliding door, in pairs in shock resistant packing. In any other case, Willach reserves the right to pack the profiles in the best way to ensure a safe transport.

All prices are gross prices in € EX WorKS, according to Incoterms 2000, incl. packaging, without VAT or any other duties, levies and fees that might arise in your country.

Subject to modification.

Price list 06/2010

Choose the method of ordering which suits you best.

order option 2

Combine single components indi-vidually for your

Portavant systems.

Use the “Complete set” tab to compile

your order.

Use the “Single components” tab to compile your

order.

Use the already ready-to-use sets for your Portavant

systems.

order option 1

Complete sets with the required system compo-

nents such as tracks, cover profiles, accessory kits

and choice of cushioning option.

Single components

• Tracks• Cover profiles• Additional profiles such as floor-wall and ceiling profiles• Accessory kits• Accessories such as end plates & hair-bristle lining

Add optional acces-sories and handles

to the individu-ally combined single components to meet the requirements of

your installation.

Add optional acces-sories and handles

to the complete sets to meet the requi-

rements of your installation.

PortavantGlass fittings with logic

Select the Portavant solution to meet your needs in only three steps, using our complete sets.

Select installation situation, determine measurements.

1

Select optional accessories

32

Select complete set


Complete sets

1. Step: Select installation situation, determine measurements.

one sash pages13 - 16

two sashes pages17 - 20track fixed to ceiling

without side-light

one sash pages5 - 8

two sashes pages9 - 12

track fixed to wall


two sashes pages27 - 32track fixed to ceiling

with side-light


Installation in glass facade

21 3

Determination of measurements: track fixed to wall, systems with 1 sash

Your project measurements (mm)Clear width (building) = LW =

Calculation of glass widthA = LW + 70 =

Calculation of profile length(track & cover profile)C = A x 2 =

Your project measurements (mm)room height (upper edge of profile) = r =

Calculation of glass heightH1 = r - 43 =

Your project measurements (mm)

Glass thickness =

Calculation of sash weight (kg)Sash weight =A/1000 x H1/1000 xGlass thickness (without film)x 2,5 =

Number of possible cushioning systems as set out table

Examination of possible cushioning options

Length of track & cover profilefor your Portavant system

Maximum number of cushioning systems for your Portavant system

Calculation of glass width and profile length


≤ 80 81–120

2x per sash

Without

Sash weight (kg)

Gla

ss w

idth

(mm

)

≥ 10

5072

0 –

1049

<

720

Without

1x per sash

2 31


track fixed towall

1 sash

5

Cover design number of sashesnumber of cushioning systems Product description Profile length Product number Execution Unit List price

Complete set, 1 sash 1996 mm 617 012.1996.110 EV 1 1 unit1x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unit

includes:

1x track profile for track fixed to wall

1x straight cover profile

1x accessory kit II „straight cover profile“

2996 mm 617 012.2996.110 EV 1 1 unit

.120 C 31 1 unit

cut to size in mm 617 012.length.110 EV 1 per m cut to size1)

.120 C 31 per m cut to size1)

1) Price plus 1x EUR 254,35. Formula: profile length (m) x price + EUR 254,35 for accessory kit. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. recommendation: hair-bristle lining (see p. 8).

Complete set, 1 sash 2996 mm 617 112.2996.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:




1x complementary accessory kit A




Complete set, 1 sash 1996 mm 617 212.1996.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:



1x accessory kit I „straight cover profile“

2996 mm 617 212.2996.110 EV 1 1 unit

.120 C 31 1 unit



1) Price plus 1x EUR 157,17. Formula: profile length (m) x price + EUR 157,17 for accessory kit. Note: suitable for sash weight up to 120 kg. recommendation: hair-bristle lining (see p. 8).

Complete sets: track fixed to wall, 1 sash, “straight cover profile”

21 3

track fixed towall

1 sash

1x per sash

2x per sash

Without

6

Complete sets: track fixed to wall, 1 sash, “rounded cover profile”


includes:


1x rounded cover profile

1x accessory kit II „rounded cover profile“

2996 mm 617 010.2996.110 EV 1 1 unit

.120 C 31 1 unit











1) Price plus 1x EUR 352,95. Formula: profile length (m) x price + EUR 352,95 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 1050 mm. recommendation: hair-bristle lining (see p. 8).




1x accessory kit I „rounded cover profile“

2996 mm 617 210.2996.110 EV 1 1 unit

.120 C 31 1 unit





21 3


track fixed towall

1 sash

1x per sash

2x per sash

Without

7

Accessories

You can find a comprehensive selection of innovative sliding door finger pull handles and pull handles, coordinated in design, in the “handles” tab. (s. S. 62-63).

Do you want to add a hair-bristle lining to your system?

Hair-bristle lining 617 253.0000.315 1 mfor cover profiles and track profiles

packing unit = 20 m

Figure Product description Profile length Product number Execution Unit List price

21 3

track fixed towall

1 sash

8

Determination of measurements: track fixed to wall, systems with 2 sashes


Calculation of glass width

A = LW/2 + 33 =

Calculation of profile length(track & cover profile)C = A x 4 + 4 =




Glass thickness =








≤ 80 81–120

2x per sash

Without

Sash weight (kg)

Gla

ss w

idth

(mm

)

≥ 10

5072

0 –

1049

<

720

Without

1x per sash

2 31


track fixed towall

2 sashes

9

Complete sets: track fixed to wall, 2 sashes, “straight cover profile”

Complete set, 2 sashes 3996 mm 617 012.3996.110 EV 1 1 unit1x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unit

per sash

includes:




5996 mm 617 012.5996.110 EV 1 1 unit

.120 C 31 1 unit




Complete set, 2 sashes 5996 mm 617 112.5996.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitper sash

includes:








Complete set, 2 sashes 3996 mm 617 212.3996.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:




5996 mm 617 212.5996.110 EV 1 1 unit

.120 C 31 1 unit



1) Price plus 1x EUR 314,34. Formula: profile length (m) x price + EUR 314,34 for accessory kits. Note: suitable for sash weight up to 120 kg. recommendation: hair-bristle lining (see p. 12).


21 3

track fixed towall

2 sashes

1x per sash

2x per sash

Without

10

Complete sets: track fixed to wall, 2 sashes, “rounded cover profile”


per sash

includes:




5996 mm 617 010.5996.110 EV 1 1 unit

.120 C 31 1 unit





includes:












5996 mm 617 210.5996.110 EV 1 1 unit

.120 C 31 1 unit





21 3


track fixed towall

2 sashes

1x per sash

2x per sash

Without

11

Accessories



packing unit = 20 m



21 3

track fixed towall

2 sashes

12

Determination of measurements: track fixed to ceiling, systems with 1 sash


Calculation of glass widthA = LW + 70 =





Glass thickness =








≤ 80 81–120

2x per sash

Without

Sash weight (kg)

Gla

ss w

idth

(mm

)

≥ 10

5072

0 –

1049

<

720

Without

1x per sash

2 31


track fixed toceiling 1 sash

13

Complete sets: track fixed to ceiling, 1 sash, “straight cover profile”


includes:

1x track profile for track fixed to ceiling



2996 mm 617 022.2996.110 EV 1 1 unit

.120 C 31 1 unit
















2996 mm 617 222.2996.110 EV 1 1 unit

.120 C 31 1 unit





21 3


1x per sash

2x per sash

Without

14

Complete sets: track fixed to ceiling, 1 sash, “rounded cover profile”


includes:




2996 mm 617 020.2996.110 EV 1 1 unit

.120 C 31 1 unit



1) Price plus 1x EUR 254,35. Formula: profile length (m) x price + EUR 254,35 for accessory kit. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. recommendation: hair-bristle lining (see p. 16); „rounded cover profile for rear side“ (see p. 16).








1) Price plus 1x EUR 352,95. Formula: profile length (m) x price + EUR 352,95 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 1050 mm. recommendation: hair-bristle lining (see p. 16); „rounded cover profile for rear side“ (see p. 16).





2996 mm 617 220.2996.110 EV 1 1 unit

.120 C 31 1 unit



1) Price plus 1x EUR 157,17. Formula: profile length (m) x price + EUR 157,17 for accessory kit. Note: suitable for sash weight up to 120 kg. recommendation: hair-bristle lining (see p. 16); „rounded cover profile for rear side“ (see p. 16).


21 3



1x per sash

2x per sash

Without

15

Accessories

are you using the „rounded cover profile“ on the front side of your sys-tem and do you want to produce the curved look on the rear side as well?

Rounded cover profile for rear side 1996 mm 617 500.1996.110 EV 1 1 unittrack fixed to ceiling .120 C 31 1 unit

2996 mm 617 500.2996.110 EV 1 1 unit

.120 C 31 1 unit

3996 mm 617 500.3996.110 EV 1 1 unit

.120 C 31 1 unit



Note: for optional clip-on on the rear side of the track profile in the event of track fixed to ceiling (to get symmetrical profile). End plates for rear cover profile are not included in the accessory kits (see p. 16).

are you installing the rear „rounded cover profile“ in your system and do you want to equip it with end plates?

End plate for „rounded cover profile& rounded cover profile for rear side“

617 250.0000.020 stainless steel

1 unit

track fixed to ceiling

left or right hand use Note: end plates for straight covers or rounded covers with straight look on the rear side are included in the accessory kits. End plates for „rounded cover profile & rounded cover profile for rear side“ are not included in the accessory kits.



packing unit = 20 m



21 3


16

Determination of measurements: track fixed to ceiling, systems with 2 sashes




Calculation of glass widthA = LW/2 + 33 =





Glass thickness =






≤ 80 81–120

2x per sash

Without

Sash weight (kg)

Gla

ss w

idth

(mm

)

≥ 10

5072

0 –

1049

<

720

Without

1x per sash

2 31


track fixed toceiling

2 sashes

17

Complete sets: track fixed to ceiling, 2 sashes, “straight cover profile”


per sash

includes:




5996 mm 617 022.5996.110 EV 1 1 unit

.120 C 31 1 unit





includes:












5996 mm 617 222.5996.110 EV 1 1 unit

.120 C 31 1 unit





21 3


2 sashes

1x per sash

2x per sash

Without

18

Complete sets: track fixed to ceiling, 2 sashes, “rounded cover profile”


per sash

includes:




5996 mm 617 020.5996.110 EV 1 1 unit

.120 C 31 1 unit





includes:












5996 mm 617 220.5996.110 EV 1 1 unit

.120 C 31 1 unit



1) Price plus 1x EUR 314,34. Formula: profile length (m) x price + EUR 314,34 for accessory kits. Note: suitable for sash weight up to 120 kg. recommendation: hair-bristle lining (see p. 20); „rounded cover profile for rear side“ (see p. 20).


21 3



2 sashes

1x per sash

2x per sash

Without

19

Accessories



2996 mm 617 500.2996.110 EV 1 1 unit

.120 C 31 1 unit

3996 mm 617 500.3996.110 EV 1 1 unit

.120 C 31 1 unit





End plate for „rounded cover profile& rounded cover profile for rear side“


1 unit


left or right hand use Note: end plates for straight covers or rounded covers with straight look on the rear side are included in the accessory kits. End plates for „rounded cover profile & rounded cover profile for rear side“ are not included in the accessory kits.



packing unit = 20 m



21 3


2 sashes

20



Calculation of glass heightSliding sash (mm)H1 = r - 43 =

Calculation of glass heightSide-light (mm)H2 = r - 63 =


Calculation of glass widthSliding sash (mm)A = LW + 35 =

Calculation of glass widthSide-light (mm)B = A + 35 =



Glass thickness =







≤ 80 81–120

2x per sash

Without

Sash weight (kg)

Gla

ss w

idth

(mm

)

≥ 10

5072

0 –

1049

<

720

Without

1x per sash

Determination of measurements: track fixed to ceiling with side-light, 1 sash

2 31


track fixed to ceiling/Side-light

1 sash

21

Complete sets: track fixed to ceiling with side-light, 1 sash, “straight cover profile”


includes:


1x straight cover profile for side-light


2996 mm 617 026.2996.110 EV 1 1 unit

.120 C 31 1 unit



1) Price plus 1x EUR 254,35. Formula: profile length (m) x price + EUR 254,35 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. other profiles: floor-wall-, ceiling-, cover profile (see p. 24/25). recommendation: hair-bristle lining (see p. 26); silicone gasket (see p. 26); end plates for floor-wall-, ceiling profile (see p. 26).













2996 mm 617 226.2996.110 EV 1 1 unit

.120 C 31 1 unit



1) Price plus 1x EUR 157,17. Formula: profile length (m) x price + EUR 157,17 for accessory kit. Note: suitable for sash weight up to 120 kg. other profiles: floor-wall-, ceiling-, cover profile (see p. 24/25), recommendation: hair-bristle lining (see p. 26); silicone gasket (see p. 26); end plates for floor-wall-, ceiling profile (see p. 26).


21 3


1 sash

1x per sash

2x per sash

Without

22

Complete sets: track fixed to ceiling with side-light, 1 sash, “rounded cover profile”


includes:


1x rounded cover profile for side-light


2996 mm 617 024.2996.110 EV 1 1 unit

.120 C 31 1 unit



1) Price plus 1x EUR 254,35. Formula: profile length (m) x price + EUR 254,35 for accessory kit. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. other profiles: floor-wall-, ceiling-, cover profile (see p. 24/25). recommendation: hair-bristle lining (see p. 26); silicone gasket (see p. 26); end plates for floor-wall-, ceiling profile (see p. 26); „rounded cover profile for rear side“ (see p. 25).








1) Price plus 1x EUR 352,95. Formula: profile length (m) x price + EUR 352,95 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 1050 mm. other profiles: floor-wall-, ceiling-, cover profile (see p. 24/25). recommendation: hair-bristle lining (see p. 26); silicone gasket (see p. 26); end plates for floor-wall-, ceiling profile (see p. 26); „rounded cover profile for rear side“ (see p. 25).





2996 mm 617 224.2996.110 EV 1 1 unit

.120 C 31 1 unit



1) Price plus 1x EUR 157,17. Formula: profile length (m) x price + EUR 157,17 for accessory kit. Note: suitable for sash weight up to 120 kg. other profiles: floor-wall-, ceiling-, cover profile (see p. 24/25). recommendation: hair-bristle lining (see p. 26); silicone gasket (see p. 26); end plates for floor-wall-, ceiling profile (see p. 26); „rounded cover profile for rear side“ (see p. 25).


21 3



1 sash

1x per sash

2x per sash

Without

23

Accessories

Do you wish to frame the fixed side-lights of your system with a floor-wall profile?

Floor-wall-profile (U-profile) 1996 mm 617 520.1996.110 EV 1 1 unitfixed side-light, profile height 16 mm .120 C 31 1 unit

2996 mm 617 520.2996.110 EV 1 1 unit

.120 C 31 1 unit

3996 mm 617 520.3996.110 EV 1 1 unit

.120 C 31 1 unit

5996 mm 617 520.5996.110 EV 1 1 unit

.120 C 31 1 unit

cut to size in mm 617 520.length.110 EV 1 per m cut to size

.120 C 31 per m cut to sizerecommendation: silicone gasket (see p. 26); end plate (see p. 26).

Do you wish to extend the fixed side-lights of your system further than the track?

Ceiling profile (U-profile) 1996 mm 617 530.1996.110 EV 1 1 unitfixed side-light, profile height 35 mm .120 C 31 1 unit

Calculation of glass height at ceiling

profile (H3)


room height (upper edge of profile) =

r = ________

Calculation of fixed sash glass height at

the ceiling profile (mm) =

H3 = r - 27 mm = ________

2996 mm 617 530.2996.110 EV 1 1 unit

.120 C 31 1 unit

3996 mm 617 530.3996.110 EV 1 1 unit

.120 C 31 1 unit

5996 mm 617 530.5996.110 EV 1 1 unit

.120 C 31 1 unit




21 3


1 sash

24

Accessories

Do you wish to close the open slot for receiving the fixed side-light in the cover profile at the door opening with a special cover profile?

Cover profile 1996 mm 617 540.1996.110 EV 1 1 unitfixed side-light .120 C 31 1 unit

2996 mm 617 540.2996.110 EV 1 1 unit

.120 C 31 1 unit


.120 C 31 per m cut to sizeNote: for clip-on on cover profiles for fixed side-light.



2996 mm 617 500.2996.110 EV 1 1 unit

.120 C 31 1 unit

3996 mm 617 500.3996.110 EV 1 1 unit

.120 C 31 1 unit


.120 C 31 per m cut to size



End plate for „rounded cover profile with fixed side-light & rounded cover


1 unit

profile for rear side“


left or right hand use

Note: End plates for straight covers or rounded covers with straight look on the rear side are included in the accessory kits. End plates for „rounded cover profile with fixed side-light & rounded cover profile for rear side“ are not included in the accessory kits.


21 3



1 sash

25

Accessories

are you using the floor-wall-profile and do you want to add end plates to the floor-wall-profile?

End plate for floor-wall-profile left or right hand use


1 unit

are you using the ceiling profile and do you want to add end plates to the ceiling profile?

End plate for ceiling profileleft or right hand use


1 unit



packing unit = 20 m

Do you wish to attach the fixed side-lights or other fixed glass sashes in the cover profile, the floor-wall-profile or the ceiling profile with a silicone gasket?

Silicone gasket for side-lightpacking unit = 50 m

glass thickness 8 mm

617 254.0000.000 transp. 1 m

617 254.0000.090 black 1 m


617 255.0000.000 transp. 1 m

617 255.0000.090 black 1 m


617 256.0000.000 transp. 1 m

617 256.0000.090 black 1 m



21 3


1 sash

26



Calculation of glass heightSliding sash (mm)H1 = r - 43 =

Calculation of glass heightSide-light (mm)H2 = r - 63 =


Calculation of glass widthSliding sash (mm)A = LW/2 + 33 =

Calculation of glass widthSide-light (mm)B = A + 35 =



Glass thickness =







≤ 80 81–120

2x per sash

Without

Sash weight (kg)

Gla

ss w

idth

(mm

)

≥ 10

5072

0 –

1049

<

720

Without

1x per sash

Determination of measurements: track fixed to ceiling with side-light, 2 sashes

2 31



2 sashes

27

Complete sets: track fixed to ceiling with side-light, 2 sashes, “straight cover profile”


per sash

includes:


1x straight cover profile for fixed side-

light


5996 mm 617 026.5996.110 EV 1 1 unit

.120 C 31 1 unit





includes:



light









light


5996 mm 617 226.5996.110 EV 1 1 unit

.120 C 31 1 unit



1) Price plus 1x EUR 314,34. Formula: profile length (m) x price + EUR 314,34 for accessory kits. Note: suitable for sash weight up to 120 kg. other profiles: floor-wall-, ceiling-, cover profile (see p. 30/31). recommendation: hair-bristle lining (see p. 32), silicone gasket (see p. 32), end plates for floor-wall-, ceiling profile (see p. 32).


21 3


2 sashes

1x per sash

2x per sash

Without

28

Complete sets: track fixed to ceiling with side-light, 2 sashes, “rounded cover profile”


per sash

includes:


1x rounded cover profile for fixed side-

light


5996 mm 617 024.5996.110 EV 1 1 unit

.120 C 31 1 unit





includes:



light









light


5996 mm 617 224.5996.110 EV 1 1 unit

.120 C 31 1 unit



1) Price plus 1x EUR 314,34. Formula: profile length (m) x price + EUR 314,34 for accessory kits. Note: suitable for sash weight up to 120 kg. other profiles: floor-wall-, ceiling-, cover profile (see p. 30/31). recommendation: hair-bristle lining (see p. 32); silicone gasket (see p. 32); end plates for floor-wall-, ceiling profile (see p. 32); „rounded cover profile for rear side“ (see p. 31).


21 3



2 sashes

1x per sash

2x per sash

Without

29

Accessories

Do you wish to frame the fixed side-lights of your system with a floor-wall profile?


2996 mm 617 520.2996.110 EV 1 1 unit

.120 C 31 1 unit

3996 mm 617 520.3996.110 EV 1 1 unit

.120 C 31 1 unit

5996 mm 617 520.5996.110 EV 1 1 unit

.120 C 31 1 unit



Do you wish to extend the fixed side-lights of your system further than the track?


Calculation of glass height at ceiling

profile (H3)


room height (upper edge of profile) =

r = ________

Calculation of fixed sash glass height at

the ceiling profile (mm) =

H3 = r - 27 mm = ________

2996 mm 617 530.2996.110 EV 1 1 unit

.120 C 31 1 unit

3996 mm 617 530.3996.110 EV 1 1 unit

.120 C 31 1 unit

5996 mm 617 530.5996.110 EV 1 1 unit

.120 C 31 1 unit




21 3


2 sashes

30

Accessories

Do you wish to close the open slot for receiving the fixed side-light in the cover profile at the door opening with a special cover profile?


2996 mm 617 540.2996.110 EV 1 1 unit

.120 C 31 1 unit


.120 C 31 per m cut to sizeNote: for clip-on on cover profiles for fixed side-light.



2996 mm 617 500.2996.110 EV 1 1 unit

.120 C 31 1 unit

3996 mm 617 500.3996.110 EV 1 1 unit

.120 C 31 1 unit




are you installing the rear curved co-ver profile in your system and do you want to equip it with end plates?



1 unit

profile for rear side“


left or right hand use

Note: end plates for straight cover profiles or rounded cover profiles for fixed side-light with straight look on the rear side are included in the accessory sets. End plates for „rounded cover profile with fixed side-light & rounded cover profile for rear side“ are not included in the accessory kits.


21 3



2 sashes

31

Accessories

are you using the floor-wall-profile and do you want to add end plates to the floor-wall-profile?

End plate for floor-wall-profileleft or right hand use


1 unit

are you using the ceiling profile and do you want to add end plates to the ceiling profile?



1 unit



packing unit = 20 m

Do you wish to attach the fixed side-lights or other fixed glass sashes in the cover profile, the floor-wall-profile or the ceiling profile with a silicone gasket?



617 254.0000.000 transp. 1 m

617 254.0000.090 black 1 m


617 255.0000.000 transp. 1 m

617 255.0000.090 black 1 m


617 256.0000.000 transp. 1 m

617 256.0000.090 black 1 m



21 3


2 sashes

32

Your project measurements (mm)Height of door aperture = LH =

Calculation of glass height (mm)H1 = LH + 28 =


Glass thickness =

Calculation of sash weight (kg)Sash weight =A/1000 x H1/1000 x Glass thickness (without film)x 2,5 =


• With a sash weight of up to 80 kg, there is a choice of cushioning on one end, cushioning on both ends and no cushioning.

• Cushioning is not possible with a sash weight of 81-120 kg


Determination of measurements: installation in glass facade, 1 sash, clear width 1000


Complete sets are also available for clear width = 1200 (see p. 36).

Please allow us to advise you for different installation situations with installation in glass facade.

LW = Clear width

LH = Clear height

LWt = Clear width when door open

A = Glass width of sash

BO = Transom light width



2 31



1 sash

33

Complete sets: installation in glass facade, 1 sash, clear width 1000, “straight cover profile”


clear width 1000 mm

includes:

1x track profile installation in glass

facade


1x profile for glass facade

1x accessory kit II „glass facade“

Note: only suitable for sash weight up to 80 kg, sash width 1070 mm. other profiles: floor-wall-profile, ceiling profile (see p. 39). recommenda-tion: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40).

Complete set, 1 sash 2074 mm 617 119.2074.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitclear width 1000 mm

includes:


facade



1x accessory kit II „glass facade“


Note: only suitable for sash weight up to 80 kg, sash width 1070 mm. other profiles: floor-wall-profile, ceiling profile (see p. 39): recommenda-tion: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40).

Complete set, 1 sash 2074 mm 617 219.2074.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitclear width 1000 mm

includes:


facade



1x accessory kit I „glass facade“

Note: suitable for sash weight up to 120 kg, sash width 1070 mm. other profiles: floor-wall-profile, ceiling profile (see p. 39). recommendation: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40).


21 3


1 sash

1x per sash

2x per sash

Without

34

Complete sets: installation in glass facade, 1 sash, clear width 1000, “rounded cover profile”


clear width 1000 mm includes: 1x track profile installation in glass facade 1x rounded cover profile 1x profile for glass facade 1x accessory kit II „glass facade“

Note: only suitable for sash weight up to 80 kg, sash width 1070 mm. other profiles: floor-wall-profile, ceiling profile (see p. 39). recommenda-tion: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40); „rounded cover profile for rear side“ (see p. 40).

Complete set, 1 sash 2074 mm 617 117.2074.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitclear width 1000 mm includes: 1x track profile installation in glass facade 1x rounded cover profile 1x profile for glass facade 1x accessory kit II „glass facade“ 1x complementary accessory kit A


Complete set, 1 sash 2074 mm 617 217.2074.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitclear width 1000 mm includes: 1x track profile installation in glass facade 1x rounded cover profile 1x profile for glass facade 1x accessory kit I „glass facade“

Note: suitable for sash weight up to 120 kg, sash width 1070 mm. other profiles: floor-wall-profile, ceiling profile (see p. 39). recommendation: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40); „rounded cover profile for rear side“ (see p. 40).


21 3



1 sash

1x per sash

2x per sash

Without

35

Your project measurements (mm)Height of door aperture = LH =

Calculaion of glass height (mm)H1 = LH + 28 =


Glass thickness =

Calculation of sash weight (kg)Sash weight =A/1000 x H1/1000 x Glass thickness (without film)x 2,5 =


• With a sash weight of up to 80 kg, there is a choice of cushioning on one end, cushioning on both ends and no cushioning.

• Cushioning is not possible with a sash weight of 81-120 kg



Complete sets are also available for clear width = 1000 (see p. 33).

Please allow us to advise you for different installation situations with installation in glass facade.



LW = Clear width

LH = Clear height

LWt = Clear width when door open

A = Glass width of sash

BO = Transom light width

Determination of measurements: installation in glass facade, 1 sash, clear width 1200

2 31


1 sash

36

Complete sets: installation in glass facade, 1 sash, clear width 1200, “straight cover profile”


clear width 1200 mm includes: 1x track profile installation in glass facade 1x straight cover profile 1x profile for glass facade 1x accessory kit II „glass facade“


Complete set, 1 sash 2474 mm 617 119.2474.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitclear width 1200 mm includes: 1x track profile installation in glass facade 1x straight cover profile 1x profile for glass facade 1x accessory kit II „glass facade“ 1x complementary accessory kit A


Complete set, 1 sash 2474 mm 617 219.2474.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitclear width 1200 mm includes: 1x track profile installation in glass facade 1x straight cover profile 1x profile for glass facade 1x accessory kit I „glass facade“

Note: suitable for sash weight up to 120 kg, sash width 1270 mm. other profiles: floor-wall-profile, ceiling profile (see p. 39). recommendation: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40)


21 3



1 sash

1x per sash

2x per sash

Without

37

Installation in glass facade, 1 sash, clear width 1200, “rounded cover profile”


clear width 1200 mm includes: 1x track profile installation in glass facade 1x rounded cover profile 1x profile for glass facade 1x accessory kit II „glass facade“


Complete set, 1 sash 2474 mm 617 117.2474.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitclear width 1200 mm includes: 1x track profile installation in glass facade 1x rounded cover profile 1x profile for glass facade 1x accessory kit II „glass facade“ 1x complementary accessory kit A


Complete set, 1 sash 2474 mm 617 217.2474.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitclear width 1200 mm includes: 1x track profile installation in glass facade 1x rounded cover profile 1x profile for glass facade 1x accessory kit I „glass facade“

Note: suitable for sash weight up to 120 kg, sash width 1270 mm. other profiles: floor-wall-profile, ceiling profile (see p. 39). recommendation: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40); „rounded cover profile for rear side“ (see p. 40).


21 3


1 sash

1x per sash

2x per sash

Without

38

Accessories

Do you wish to frame the glass facade of your system with a floor-wall-profile?


2996 mm 617 520.2996.110 EV 1 1 unit

.120 C 31 1 unit

3996 mm 617 520.3996.110 EV 1 1 unit

.120 C 31 1 unit

5996 mm 617 520.5996.110 EV 1 1 unit

.120 C 31 1 unit



recommendation: silicone gasket (see p. 41); end plate (see p. 40).

Do you wish to attach the fixed glass sashes of your system with a ceiling profile?


2996 mm 617 530.2996.110 EV 1 1 unit

.120 C 31 1 unit

3996 mm 617 530.3996.110 EV 1 1 unit

.120 C 31 1 unit

5996 mm 617 530.5996.110 EV 1 1 unit

.120 C 31 1 unit




21 3



1 sash

39

Accessories


Rounded cover profile for rear side 2074 mm 617 500.2074.110 EV 1 1 unittrack fixed to wall .120 C 31 1 unit

2474 mm 617 500.2474.110 EV 1 1 unit

.120 C 31 1 unit

Note: for optional clip-on on the rear side of the track profile in the event of track fixed to ceiling (to get symmetrical profile). end plates for rear cover profile are not included in the accessory kits (see p. 40).

are you using the profile for glass facade and do you want to add end plates?

End plate for profile for glass facadewith rounded cover profile for rear side


1 unit

Note: end plates for straight cover profiles or rounded cover profiles for fixed side-light with straight look on the rear side are included in the accessory kits.

are you using the floor-wall-profile and do you want to add end plates?



1 unit

are you using the ceiling profile and do you want to add end plates?



1 unit



packing unit = 20 m


21 3


1 sash

40

Accessories

Do you wish to attach the side-lights or other fixed glass sashes in the cover profile, the floor-wall-profile or the ceiling profile with a silicone gasket?

Silicone gasket for fixed side-lightpacking unit = 50 m


617 254.0000.000 transp. 1 m

617 254.0000.090 black 1 m


617 255.0000.000 transp. 1 m

617 255.0000.090 black 1 m


617 256.0000.000 transp. 1 m

617 256.0000.090 black 1 m



21 3



1 sash

41


1 sash

Choose the single components from our range.


Single componentsProfiles

Single components: profiles

track profile 1996 mm 617 015.1996.110 EV 1 1 unittrack fixed to wall .120 C 31 1 unit

2996 mm 617 015.2996.110 EV 1 1 unit

.120 C 31 1 unit

3996 mm 617 015.3996.110 EV 1 1 unit

.120 C 31 1 unit

5996 mm 617 015.5996.110 EV 1 1 unit

.120 C 31 1 unit


.120 C 31 per m cut to sizerecommendation: hair-bristle lining (see p. 58).

track profile 1996 mm 617 025.1996.110 EV 1 1 unittrack fixed to ceiling .120 C 31 1 unit

2996 mm 617 025.2996.110 EV 1 1 unit

.120 C 31 1 unit

3996 mm 617 025.3996.110 EV 1 1 unit

.120 C 31 1 unit

5996 mm 617 025.5996.110 EV 1 1 unit

.120 C 31 1 unit





44


Straight cover profile 1996 mm 617 055.1996.110 EV 1 1 unittrack fixed to ceiling or track fixed to wall .120 C 31 1 unit

2996 mm 617 055.2996.110 EV 1 1 unit

.120 C 31 1 unit

3996 mm 617 055.3996.110 EV 1 1 unit

.120 C 31 1 unit

5996 mm 617 055.5996.110 EV 1 1 unit

.120 C 31 1 unit



Rounded cover profile 1996 mm 617 035.1996.110 EV 1 1 unittrack fixed to ceiling or track fixed to wall .120 C 31 1 unit

2996 mm 617 035.2996.110 EV 1 1 unit

.120 C 31 1 unit

3996 mm 617 035.3996.110 EV 1 1 unit

.120 C 31 1 unit

5996 mm 617 035.5996.110 EV 1 1 unit

.120 C 31 1 unit


.120 C 31 per m cut to sizerecommendation: hair-bristle lining (see p. 58); „rounded cover profile for rear side“ (see p. 49).




45


Straight cover profile for fixed side-light 1996 mm 617 065.1996.110 EV 1 1 unittrack fixed to ceiling or track fixed to wall .120 C 31 1 unit

2996 mm 617 065.2996.110 EV 1 1 unit

.120 C 31 1 unit

3996 mm 617 065.3996.110 EV 1 1 unit

.120 C 31 1 unit

5996 mm 617 065.5996.110 EV 1 1 unit

.120 C 31 1 unit



Rounded cover profile for fixed side-light 1996 mm 617 045.1996.110 EV 1 1 unittrack fixed to ceiling or track fixed to wall .120 C 31 1 unit

2996 mm 617 045.2996.110 EV 1 1 unit

.120 C 31 1 unit

3996 mm 617 045.3996.110 EV 1 1 unit

.120 C 31 1 unit

5996 mm 617 045.5996.110 EV 1 1 unit

.120 C 31 1 unit


.120 C 31 per m cut to sizerecommendation: hair-bristle lining (see p. 58); „rounded cover profile for rear side“ (see p. 49).



46


Rear profile for glass facade 4960 mm 617 005.4960.110 EV 1 1 unitfor attaching the track to a glass facade .120 C 31 1 unit



other required system components: track profile for wall mounting (see p. 44); „straight cover profile“ respectively „rounded cover profile“ (see p. 45); accessory kit I „glass facade“ without ComforT SToP + AUTo CLoSE respectively accessory kit II „glass facade“ with ComforT SToP + AUTo CLoSE (see p. 55/56); if applicable complementary accessory kit „glass facade“ (see p. 57); if applicable floor-wall-profile, ceiling profile (see p. 47/48). recommendation: „rounded cover profile for rear side“ (see p. 49); end plates for profile for glass facade with „rounded cover profile“ on rear (see p. 58). Note: end plates for the installation in glass facade with straight design on the rear side are included in the accessory kits.


for attaching your fixed sash to the floor

and the wall2996 mm 617 520.2996.110 EV 1 1 unit

.120 C 31 1 unit

3996 mm 617 520.3996.110 EV 1 1 unit

.120 C 31 1 unit

5996 mm 617 520.5996.110 EV 1 1 unit

.120 C 31 1 unit


.120 C 31 per m cut to sizerecommendation: silicone gasket (see p. 59), end plate for floor-wall-profile (see p. 58).




47



for attaching your fixed sash to the

ceiling2996 mm 617 530.2996.110 EV 1 1 unit

.120 C 31 1 unit

3996 mm 617 530.3996.110 EV 1 1 unit

.120 C 31 1 unit

5996 mm 617 530.5996.110 EV 1 1 unit

.120 C 31 1 unit


.120 C 31 per m cut to sizerecommendation: silicone gasket (see p. 59), end plate for floor-wall-profile (see p. 58).


for covering the open slot in the cover for

fixed side-lights in the door opening2996 mm 617 540.2996.110 EV 1 1 unit

.120 C 31 1 unit



Note: for clip-on on cover profiles for fixed side-light.



48



for producing a curved look also on the

rear side of your system 2996 mm 617 500.2996.110 EV 1 1 unit

.120 C 31 1 unit

3996 mm 617 500.3996.110 EV 1 1 unit

.120 C 31 1 unit



Note: for optional clip-on on the rear side of the track profile in the event of track fixed to ceiling (to get symmetrical profile). end plates for rear cover profile are not included in the accessory kits (see p. 58).




49

Single components: accessories

are you installing the „straight cover profile“ and do you require an acces-sory kit for doors up to 120 kg sash weight without CoMFoRt StoP and aUto CLoSE? this accessory kit is suitable for all Portavant installations except glass facades. the corresponding accesso-ry kit for glass facades can be found on p. 55.

accessory kit I „straight cover profile“ 617 205.0000.000 1 unit2x end stop mechanism for holding in

end position

for sash weight up to 120 kg

includes:

2x clamp-carriers with height ad-

justment, safety catch and anti-tilt-

protection

4x safety studs for special applications

1x set elastomeric clamping inserts

from 8 mm tempered glass till 12,76

mm laminated glass

1x floor guide from 8 mm till 12,76 mm

glass thickness

2x end stops with 2 rubber cushions

each

2x return stops for holding the door in

the final position

2x end plates (stainless steel) for

„straight cover profile + track profile“


„straight cover profile of side-light +

track profile“

Note: 1x per door sash required. Suitable for sash weight up to 120 kg. Note: glass facade installation requires accessory kit I „glass facade“ (see p. 55).



Single componentsaccessories

51


are you installing the „rounded cover profile“ and do you require an acces-sory kit for doors up to 120 kg sash weight without CoMFoRt StoP and aUto CLoSE? this accessory kit is suitable for all Portavant installations except glass facades. the corresponding accesso-ry kit for glass facades can be found on p. 55.

accessory kit I „rounded cover profile“ 617 200.0000.000 1 unit2x end stop mechanism for holding in

end position


includes:



protection




mm laminated glass


glass thickness


each

2x return stops for holding the door in

the final position


„rounded cover profile + track profile“


„rounded cover profile of side-light +

track profile“

Note: 1x per door sash required. Suitable for sash weight up to 120 kg. Note: glass facade installation requires accessory kit I „glass facade“ (see p. 55).


ZubehörSingle components

accessories

52


are you installing the „straight cover profile“ and do you require an accessory set for doors up to 80 kg sash weight with CoMFoRt StoP and aUto CLoSE? this accessory kit is suitable for all Portavant installations except glass facades. the corresponding accesso-ry kit for glass facades can be found on p. 56.

accessory kit II „straight cover profile“ 617 225.0000.000 1 unit1x CoMFoRt StoP + aUto CLoSE

1x end stop mechanism for holding in end position


includes:



protection




mm laminated glass


glass thickness


each

1x return stop for holding the door in

the final position

1x cushioning and self-closing system

ComforT SToP + AUTo CLoSE with

patented working mechanism and

fixing adapter




„straight cover profile profile of side-

light + track profile“

Note: 1x per door sash required. only suitable for sash weight up to 80 kg. ComforT SToP + AUTo CLoSE can be used on one side from 720 mm sash width onwards. ComforT SToP + AUTo CLoSE can be used on both sides from 1050 mm sash width onwards. ComforT SToP + AUTo CLoSE can be retrofitted. Note: glass facade installation requires accessory kit II „glass facade“ (see p. 56).




53


are you installing the „rounded cover profile“ and do you require an accessory set for doors up to 80 kg sash weight with CoMFoRt StoP and aUto CLoSE? this accessory kit is suitable for all Portavant installations except glass facades. the corresponding accesso-ry kit for glass facades can be found on p. 56.

accessory kit II „rounded cover profile“ 617 220.0000.000 1 unit1x CoMFoRt StoP + aUto CLoSE



includes:



protection




mm laminated glass


glass thickness


each


the final position

1x cushioning and self-closing system

ComforT SToP + AUTo CLoSE with

patented working mechanism and

fixing adapter




„rounded cover profile of side-light +

track profile“

Note: 1x per door sash required. only suitable for sash weight up to 80 kg. ComforT SToP + AUTo CLoSE can be used on one side from 720 mm sash width onwards. ComforT SToP + AUTo CLoSE can be used on both sides from 1050 mm sash width onwards. ComforT SToP + AUTo CLoSE can be retrofitted. Note: glass facade installation requires accessory kit II „glass facade“ (see p. 56).



54


Do you use Portavant for the ins-tallation in glass facade and do you require an accessory kit for doors up to 120 kg sash weight without CoMFoRt StoP und aUto CLoSE?

accessory kit I „glass facade“ 617 207.0000.000 1 unitfor „straight & rounded cover profile“


includes:



protection




mm laminated glass


glass thickness


each


the final position





2x end plates (stainless steel) for profile

for glass facade

1x set of fixing materials for glass

facade with 14 drill holes (incl. shims,

screws and sealing compound)

Note: 1x per door sash required. Suitable for sash weight up to 120 kg.




55


Do you use Portavant for the ins-tallation in glass facade and do you require an accessory kit for doors up to 80 kg sash weight with CoMFoRt StoP und aUto CLoSE?

accessory kit II „glass facade“ 617 227.0000.000 1 unitfor „straight & rounded cover profile“

1x CoMFoRt StoP + aUto CLoSE 1x end stop mechanism for holding in end position includes: 2x clamp-carriers with height ad-justment, safety catch and anti-tilt-protection 4x safety studs for special applications 1x set elastomeric clamping inserts from 8 mm tempered glass till 12,76 mm laminated glass 1x floor guide from 8 mm till 12,76 mm glass thickness 2x end stops with 2 rubber cushions each 1x return stop for holding the door in the final position 1x cushioning and self-closing system ComforT SToP + AUTo CLoSE with patented working mechanism and fixing adapter 2x end plates (stainless steel) for „straight cover profile + track profile“ 2x end plates (stainless steel) for „rounded cover profile + track profile“ 2x end plates (stainless steel) for profile for glass facade 1x set of fixing materials for glass facade with 14 drill holes (incl. shims, screws and sealing compound)

Note: 1x per door sash required. only suitable for sash weight up to 80 kg. ComforT SToP + AUTo CLoSE can be used on one side from 720 mm sash width onwards. ComforT SToP + AUTo CLoSE can be used on both sides from 1050 mm sash width onwards. ComforT SToP + AUTo CLoSE can be retrofitted.



56


Do you wish to equip your system with additional cushioning systems for up to 80 kg sash weight?

Complementary accessory kit a 617 230.0000.000 1 unit1x retrofit ComforT SToP + AUToCLoSE for sash weight up to 80 kg Note: only suitable for sash weight up to 80 kg. Also required for cushioning on both sides.

The complementory accessory kit A can be combined with accessory kit I and accessory kit II. ComforT SToP + AUTo CLoSE can be used on one side from 720 mm sash width onwards. ComforT SToP + AUTo CLoSE can be used on both sides from 1050 mm sash width onwards. ComforT SToP + AUTo CLoSE can be retrofitted.

Do you with to equip your system with cushioning systems for up to 40 kg sash weight?

Complementary accessory kit B 617 233.0000.000 1 unit1x retrofit ComforT SToP+ AUToCLoSE for sash weight up to 40 kg Note: only suitable for sash weight up to 40 kg.

The complementory accessory kit B can be combined with accessory kit I. ComforT SToP + AUTo CLoSE can be used on one side from 720 mm sash width onwards. ComforT SToP + AUTo CLoSE can be used on both sides from 1050 mm sash width onwards. ComforT SToP + AUTo CLoSE can be retrofitted.

are you looking for a Portavant with synchronously opening system in which both sashes can be opened simultanously by hand?

Complementary accessory kit C 617 210.0000.000 1 unitfor 2-sash synchronously openingsystem, in connection with 2x accessory kit I, for sash weight up to 80 kg

Note: the synchronised fitting is only suitable for a door sash weight of up to 80 kg each. The synchronised fitting is only suitable for wall and ceiling mounting without side-lights. The kit for synchronously opening doors cannot be combined with ComforT SToP + AUTo CLoSE.

Do you require additional accessories to the components included in the accessory kits I and II „glass facade“ for glass facade installation?

Complementary accessory kit „glass 617 237.0000.000 1 unitfacade“

contains: 1x set of fixing materials for glass facade with 14 drill holes (incl. shims, screws and sealing compound)

Do you wish to install a timber sliding door instead of a glass sliding door and do you require an adapter for applying Portavant?

Complementary accessories kit „timber 617 235.0000.000 1 unitsliding door“

contains: 1x set of fixing materials for timber sliding door (incl. screws) 2x roller assembly adapter sheet for timber sliding door 2x safety catch for timber sliding door 1x floor guide for timber sliding door

Note: Please allow us to advise you with regard to size and application. Note: The complementary accessory kit „timber sliding door“ can be combined with accessory kits I and II. ComforT SToP + AUTo CLoSE can be used on a single side from sash width 720 mm. ComforT SToP + AUTo CLoSE can be used on both sides from sash width 1050 mm. ComforT SToP + AUTo CLoSE can also be retrofitted.




57



End plate for „rounded cover profile & rounded cover profile for rear side“


1 unit

track fixed to ceiling left or right hand use Note: end plates for „straight cover profile“ and „rounded cover profile“ with straight design on the rear side are included in the complemen-

tory accessory kits. End plates for „rounded cover profile & rounded cover profile for rear side“ are not included in the accessory kits.

are you installing the rear „rounded cover profile“ in your system with side-light and do you want to equip it with end plates?



1 unit

profile for rear side“ track fixed to ceiling left or right hand use

Note: end plates for „straight cover profile“ and „rounded cover profile“ for fixed side-light with straight design on the rear side are included in the complementory accessory kits. End plates for „rounded cover profile with fixed side-light & rounded cover profile for rear side“ are not included in the accessory kits.

are you using the floor-wall-profile and do you want to add end plates?



1 unit

are you using the ceiling profile and do you want to add end plates?



1 unit

are you installing the „rounded cover profile“ on the front and rear side of your glass facade installation system and do you want to use end plates?

End plate for profile for glass facade with „rounded cover profile“ on rear


1 unit

Note: end plates for „straight cover profile“ and „rounded cover profile“ for the installation in glass facade with straight design on the rear side are included in the complementory accessory kits.



packing unit = 20 m



58


Do you wish to attach the side-lights or other fixed glass sashes in the cover profile, the floor-wall profile or the ceiling profile with a silicone gasket?



617 254.0000.000 transp. 1 m

617 254.0000.090 black 1 m


617 255.0000.000 transp. 1 m

617 255.0000.090 black 1 m


617 256.0000.000 transp. 1 m

617 256.0000.090 black 1 m

Do you require additional floor gui-des to the one included in the acces-sory kit?

Replacement floor guide 617 264.0000.000 EV 1 1 unitglass thickness 8 to 12,76 mm

incl. inserts Note: one floor guide is available in the complete sets and accessory kits.




59

Photographic print with kind authorization of the Dorint Resort An den Thermen Freiburg (Germany)


Choose the pull handles from our range.


Handles

Handles

Finger pull handle (enclosed)diameter 64 mm


1 pair

self-adhesive, no drill holes in glass

suitable for any glass thickness

weight: 0,4 kg

Note: no glass drilling required

assembly jig 617 290.0000.000 1 unitfor self-adhesive finger pull handle

(Art. No. 617 266.0000.020)

for safe positioning on the sliding door,

both sides and congruent

Finger pull handle (enclosed) 617 267.0000.110 EV 1 1 pairdiameter 65 mm 617 267.0000.120 C 31 1 pair

for 50 mm diameter drill hole

glass thickness 8 to 10 mm

weight: 0.4 kg


1 pair

Note: colour EV 1 suitable for profiles in EV 1; colour C31 suitable for profiles in C31.


HandlesHandles

62

Handles

Pull handle 617 268.0000.110 EV 1 1 pairhandle length 400 mm

distance between drill holes 200 mm617 268.0000.020 stainless

steel1 pair

handle diameter 25 mm

drill hole diameter 16 mm

glass thickness 8 to 12,76 mm

weight: 1,5 kg

Note: colour EV 1 suitable for profiles in EV 1.

Pull handle 617 269.0000.110 EV 1 1 pairhandle length 700 mm

distance between drill holes 500 mm617 269.0000.020 stainless

steel1 pair

handle diameter 25 mm

drill hole diameter 16 mm

glass thickness 8 to 12,76 mm

weight: 2,1 kg

Note: colour EV 1 suitable for profiles in EV 1.



Handles

63

HandlesHandles

Packaging

Do you require profile packing mate-rial to pack the profiles cut by your own?

optional profile packing material

profile cardboard packing

in endless ondulated cardboard

packing unit = 50 m

top for cardboard packing (2 units per

profile cardboard packing are necessary)

packing unit = 50 units

PE-spacer (1 piece per 0,5 m profile + 1

piece per cardboard box are necessary)

packing unit = 50 units

VWDV.0003 1 m

VWDV.0002 1 unit

VXDV.0001 1 unit

Do you require packaging samples for your customer?

Packaging sample with 150 mm profiles

rounded cover profile 617 600.0000.110 EV 1 1 unit

straight cover profile

617 600.0000.120 C 31 1 unit

617 601.0000.110 EV 1 1 unit

617 601.0000.120 C 31 1 unit



Packaging

65

Tools

Do you require a torque driver for the professional mounting of end stops?

torque driver 3 nm (without bit) 617 260.0000.000 1 unitfor the professional mounting of the end

stops

Blade for 3 nm

(not suitable for torque driver 12 Nm)

617 259.0000.000 1 unit

Do you require a torque driver for the professional mounting of clamp-carriers?

torque driver 12 nm (without bit) 617 261.0000.000 1 unitfor the professional mounting of clamp-carriers

Blade for 12 nm

(not suitable for torque driver 3 Nm)

617 258.0000.000 1 unit



tools

67

for your notes 68

for your notes


69

The companyWillach belongs to the leading producers of glass fittings in Europe. Since its establishment in 1889, the manufacture of products to the highest quality and precision standards has been the supreme dictum of the company. Numerous technical innovations and intelligent solutions with regard to detail meant that Willach was able to cement its pioneering reputation at an early stage. With the Vitris product line, Willach today offers a range of high quality fittings for glass sliding doors. furthermore the product range comprises a comprehensive modular system of showcase fittings, sliding door locks and slot bar systems for discerning interior, shop and trade show furnishings. Vitris products are certified in accordance with ISo standards and are manufactured at our ruppichteroth (Germany) production site to meet stringent manufacturing standards. This forms the basis for the excellent quality and consistently high level of availability of the complete Vitris range.

Contact us and let us advise you!

Gebr. Willach GmbHStein 2D-53809 ruppichterothGermanyTel.: +49 (0)2295 92 08 -421/-422fax: +49 (0)2295 92 08 [email protected]

flyers, brochures and drawings are merely product descriptions and represent neither assured properties nor statements of guarantee.

Stamp

Utilise all the benefits

CoMFoRt StoP The cushioning system for your safety. ComforT SToP slows the glass door effectively, gently and quietly irrespec-tive of its weight and speed of closure, and does so over a distance of several centi-metres.

EXaCt tRIGGER The triggering mechanism for reliable functioning. Its revolutionary design principle (patent pending) ensures that the cushioning system is always reliably functioning.

SYStEM FIt The modular solution for your installation situation. makes almost any installation possible with modular system components in a variety of combinations.

aUto CLoSE The self-closing system to make you feel good. AUTo CLoSE fully closes the glass door effectively, gently and quietly once it has been slowed by the inno-vative cushioning system

EaSY InStaLL The solution for ease of assembly without having to cut glass. Turns the installation of glass sliding doors into child’s play.

DESIGn SELECt Perfection and diversity for your design highlights. Enables stylistic highlights with beautifully shaped, sophis-ticated cover profiles in a curved or straight design and the appropriate, innovative handles in your preferred colour.

COMFORTSTOP AUTOCLOSE

DESIGN SELECT

portavant 120 product list

Documents