portfolio 2014
DESCRIPTION
ÂTRANSCRIPT
scott harrison
portfolio 2014
table of contents
JFK Terminal Expansion
Larimer CoHousing
Carrie Furnace Visitor’s Center
Frick Park Environmental Center
2024 Fifth Ave
Carlsberg Sponsorship Center
Carlsberg Mixed Use Row-Housing
Lunar Gala
Furniture
1-9
11-17
19-25
27-35
37-39
41-45
47-49
51-53
55-57
1
JFK Terminal ExpansionAs part of the systems integration stu-dio, we were tasked to expand JFK’s Terminal 1 and to add 7 gates to the existing terminal. The design aims to centralize the main departures and arrivals functions. To do this and cre-ate continuity across the processor, the same language was used while extending the processor. The ge-ometries established by the existing terminal were extended to the site boundary where a new geometry, nor-mal to the curve, was introduced. The shift in geometry is remedied through a tensile roof physically connecting the two concourses and through the introduction of a second retail node at this point. The shift in the geom-etry allows for a series of parabol-ic troughs to face south to produce the maximum amount of electricity.
Existing Figure GroundT2 and T3 to be demolished
Expansion to site boundary
New Figure GroundExpansion of existing geometry
2
Departures Level Plan
3
Arrivals Level Plan
4
Aerial view showing continuous processor, tensile roof and parabolic troughs.
5
Section Through Processor
Section Through New Node
6
View exiting security
7
Transverse section through concourse
Longitudinal section through concourse
8
View through concourse
9
A chilled Glycol solution is pumped from mechanical rooms on the 2nd floor up through glass vacuum sealed tubes that pass over a series of parabolic troughs. The troughs direct the sun’s heat onto the glass tube, super-heating the glycol solution. The superheat-ed steam then travels through a steam generator, converting the heat energy into electrical energy to be used by the terminal.
The troughs track the sun to provide the maximum energy and to eliminate unnecessary heat gain.
10
11
Larimer CoHousingAs part of the Urban Design Studio, we worked with the Larmier Community to redevelop the northwest corner of Lar-imer with the goal of acting as a cata-lyst for the regrowth of the community as a whole. The project redevelops three blocks, providing 65 units of housing as well as large community spaces. The two outer blocks each have two clusters of co-housing, with two common houses. The center block reverses the figure ground relationship and places a nature center in the middle of the block, becoming an icon for the community and allowing from a number of smalled spaces surrounding it.
12
Site Plan
13
Cluster Plan
14
Plans
15
Site Section
16
View Down Larimer Ave.
17
Street Elevation
Courtyard Elevation
18
19
Carrie Furnace Visitor CenterFor the advanced construction studio and in collaboration with the Rivers of Steel Heritage group, we were asked to design a visitor center to showcase the history of the Carrie Furnaces and the process of making steel. The Carrie Furnaces were originally built in 1884, and at the peak of produc-tion, seven blast furnaces stood tall. After the fall of the steel industry the site be-came abandoned and five of the furnaces were demolished. The design focuses on the contrast between the new and the old. The building, viewed as a mass in juxtapo-sition to the wireframe-like structure of the furnaces, delicately touches the furnaces where the viewing platform is located. From the interior of the building, views to the out-side are limited and selected to highlight specific aspects of the furnaces. A large ki-netic oculus, the mechaincs for which are exposed in a similar fashion to that of the site, sits above the waiting area to serve as a monument to the history of the site..
20
Ground Floor Plan
EntryInformation TicketingLobbyCaféKitchenWaiting Area
1234567
1
2
4
5
6
7
21
Second Level Plan
TheaterMechanical StorageViewing Platform
1234
1
2
3
4
22
Z Girt
3/4” Plywood
Steel Plate
T&G Wood Flooring
Structural Steel Plate
Foundation
IGU Glazing
2 x 6 Header
Air Vapor Barrier
1/2” Sheathing
2 x 6 Metal Studs
3” Rigid Insulation
6” Hat Channel
2” Bent Steel Pipe
4’ x 8’ Perforated Metal Panel
Wall section through waiting area and kinetic oculus
23
Transverse section
Longitudinal section
24
View to waiting area under kinetic oculus
25
a b c d
The mechaincs for the movement of the occulus are displayed to the visitor as an homage to the furnaces and the mechanics of the site.
26
27
Frick Park Environmental CenterThe environmental center at Frick Park called for a series of classrooms and office spaces. The chosen site, an anomaly in Frick park, is an existing meadow. In contrast to the meadow, a large portion of Frick park is built on slag heaps, which are waste from the process of making steel. The build-ing acts a container for the meadow and three large concrete walls create an ellipse surrounding the meadow. Apertures cre-ated from the gap of the spine of the roof allow for light to wash the walls, creating an emphasis on movement through the building. This same spine divides the of-fice spaces from classrooms. The class-rooms have direct access to the meadow and the students are able to interact with nature through an operable component wall on the south side of the building.
28
29
30
Water Classroom
31
Ground Floor Plan
32
Lobby
33
Greenhouse
Circulation Water Classroom Courtyard
Section through office and classrooms
34 OPPOSITION OF SLOPING RAMP AND WALL PANELS FOCUS ATTENTION THROUGH NOOK TO LANDSCAPE
COMPONENT ALLOWS FOR INTERACTION WITH ENVIRONMENT
CANTED WALL ALLOW FOR WATER AND LIGHT TO ACCESS PLANTS
LINEAR GREENHOUSE CREATESTIMELINE OF GROWTH
LIGHT ENTERS THORUGH OPENINGS ON ROOF AND IS DIFFUSED THROUGH TENSOTHERM FOR OFFICES
“FLOATING” STAIR CREATES UNDERSTANDING OF MOVING ACROSS DIFFERENT GEOMETRIES
CARVED HANDRAIL MEET SLOPING WALL PULLING USER INTO CLASSROOM
education roof
o�ce roof
tensotherm
lobby roof
greenhouse
35OPPOSITION OF SLOPING RAMP AND WALL PANELS FOCUS ATTENTION THROUGH NOOK TO LANDSCAPE
COMPONENT ALLOWS FOR INTERACTION WITH ENVIRONMENT
CANTED WALL ALLOW FOR WATER AND LIGHT TO ACCESS PLANTS
LINEAR GREENHOUSE CREATESTIMELINE OF GROWTH
LIGHT ENTERS THORUGH OPENINGS ON ROOF AND IS DIFFUSED THROUGH TENSOTHERM FOR OFFICES
“FLOATING” STAIR CREATES UNDERSTANDING OF MOVING ACROSS DIFFERENT GEOMETRIES
CARVED HANDRAIL MEET SLOPING WALL PULLING USER INTO CLASSROOM
education roof
o�ce roof
tensotherm
lobby roof
greenhouse
Light enters through openings in roof and is diffused through Tensotherm
Linear greenhouse createstimeline of growth
Canted wall allows for plants toaccess light and water
Component engages studentswith environment
Carved handrails pullsstudent into classrooms
Reveal in staircase showcasesshift in geometries
Opposition of wall panels and rampcreate focus onto landscape
36
37
2024 Fifth AvenueThe design for the renovation of the turn of the century structure was done in collabo-ration with Kevin Kuntz, Lee Yan Shun, Matt Ho, and Monica Tong for CMU’s Issues of Practice class and Action Housing. The proj-ect statement tasked each group to work with an existing structure in Pittsburgh’s mainly abandoned Uptown neighbor-hood. The goal was to meet the criteria for affordable housing at 80% median income. In order to accomplish this, we needed a detailed understanding of the components and process of construction. The design keeps intact much of the original front fa-cade while creating a new relationship to the street for business. The interior of the home was reorganized around a new cen-trally located stairwell. The stair volume also acts as a passive cooling mechanism. Unlike the front facade, the rear facade has been heavily altered in order to relate to the new double height kitchen/dining area and to emphasize the backyard community.
38
Level 1
Level 2
Existing Roof LevelGarden Level
14
151617
19
21
22
23
24
25
26
31
32
27
2930
20
18
33
28
39
40
41
Carlsberg Sponsorship CenterCompleted while studying in Copenhagen, the Carslberg Sponsorship Center is a muse-um of sorts, designed to showcase the Carls-berg brand’s sponsorship in sports under the Carlsberg name and in music under the Tuborg name. The building is situated in the old Carlsberg area, which is currently under development. To enclose the largest court-yard within the Carlsberg development, the building engages with the existing context and creates a central pedestrian through-way towards the courtyard. This creates two separate buildings on grade, one for tickets and entry, and the other for retail and exit. Underground, two parallel exhib-its connect the two buildings. A series of skylights create a connection between the the exhibit space and the courtyard above. With Carlberg’s interest in the public realm, the entry portion of the building slopes to grade, making an accesible rooftop space for visitor or passerby to relax in the sun.
Create access to courtyard Submerge buildings, create connection underground
Create accessible public roof
Site footprint
Engage with existing buildings Final build out
42
43
Section through retail and exhibition space
Section through lobby and beginning of exhibition space
44
South Elevation
Common Exhibition Space
45
Ground Floor
Basement Plan
46
47
Carslberg Mixed-Use Row-HousingThe site of the original Carlsberg brewery has sat idle for years, recently a new master-plan has been revealed for the development of the site. A mixture of high-rise and low-rise mixed used buildings are planned to pop-ulate the area. At one edge of the site lies a large parking lot bordering a number of row houses from the 1880s. To close of this de-velopment from the new, a series of mixed-use houses follow along a slight curve. The homes are designed with ground floor re-tail with living spaces above. Access to the homes comes from a shared stair and it is this stair that allows for the curve to occur. The house itself uses an open stair to create spatial divisions throughout. Outdoor spac-es out back and on top of the house allow for different levels of privacy in outdoor living.
48
GROUND FLOOR1:50
FIRST FLOOR1:50
SECOND FLOOR1:50
ROOF TERRACE1:50
TYPICAL SECTION1:50
Ground Floor Plan
Typical Section
Second Floor Plan
49
GROUND FLOOR1:50
FIRST FLOOR1:50
SECOND FLOOR1:50
ROOF TERRACE1:50
Ground Floor Plan Second Floor Plan
50
51
Lunar Gala: MØBLER with Morgan Stampf
Lunar Gala is an entirely student run fash-ion show, culminating in a thousand per-son event. Morgan and I were selected to design a line shoes for the show. With our combined interest in shoes and methods of fabrication, we designed and fabricated 6 pairs of shoes. A mixture of digital fabri-cation (laser cutting and CNC milling) and analog methods were used. All six pairs were finished for the show and were the first shoe line in the show’s 14 year history.
52
53
54
55
FurnitureDisplayed are two pieces of furniture, a desk chair and a rocking chair. Designed in a furniture design and a digital fabrica-tion classes, respectively. Each chair aims to showcase to tools used in its construc-tion. The desk chair uses ash, hard ma-ple and ipe supports. The rocking chair uses baltic birch plywood and canvas.
56
57