Portfolio Alyssa Allen

Contact:Alyssa Allen208 Pin Oak Dr.Harker Heights, Tx 76548254-368-2315alyssa_allen25@yahoo.com

Table Of Contents:Brochure

Business card

Letterhead

Logos

Montage

Imaging

Web page

Flier

Event Ad

BrochureDescription: A two-sided offset folding brochure.

Programs Used: Adobe Illustrator, Adobe InDesign, and Adobe Photoshop

Date: 7/11/15

Course/ Instructor: Comm 130 Section 6 Brother Judkins

Objective: To create a brochure using all three of the Adobe products. To promote a project and also create my own logo to go into the brochure.

Process:First I thought of what I wanted my brochure to be about. Then I sketched ideas and bro-chure layouts. I decided to do my brochure on the Tesla Model S and use an offset bro-chure. Next I picked out images that would look good in my brochure. I used ten images in my brochure not including the logo I made. I went into Adobe Illustrator and made a logo for the Tesla motors club. Then I opened Adobe InDesign and set up my offset brochure. I put the images and logo in my InDesign brochure. For my text wrap image I went into Pho-toshop and used the magnetic lasso tool to get the part of the image I wanted. Then I used a feather on it to make the edges blend together so they looked better. Finally I put that im-age into my brochure in Indesign and made the text wrap around it. Lastly I used word to write my sub-titles and body copy for my brochure. I then put the text in my brochure with the images and logo. It all came nicely together using these three Adobe Programs: Adobe InDesign, Adobe Illustrator, and Adobe Photoshop.

Front Page

Inside Page

Back Page

Description: A professional business card using a logo design for a company.

Programs Used: Adobe Illustrator and Adobe InDesign

Date: 6/13/15

Course/ Instructor: Comm 130 Section 6 Brother Judkins

Objective: To create a business card with a logo I designed. Help spread the word of the company and look presentable.

Process: First I came up with a logo design in Adobe Illustrator. Next I copied that logo into Ado-be InDesign. Then I made the business card 3.5inx2in. Once I did that I thought of what would make my business card stand out from other companies. I decided to make the busi-ness card front and back, so the information looks better and not as crowded on the card. I made the front the same color but without the blueprint design. I put the logo in the mid-dle. The back I put my information and logo. I decided to put a blueprint for a house on the back because its Arrow Housing. I made sure to put everything that a business card needs on the card. I placed everything nicely so it wouldnt look crowded on the card.

Business Card

LetterheadDescription:A professional letterhead using a logo design for a company.

Programs Used: Adobe Illustrator and Adobe InDesign

Date: 6/13/15

Course/ Instructor: Comm 130 Section 6 Brother Judkins

Objective:To create a business letterhead with a logo I designed. Letterheads look presentable and should go with your company deisgn.

Process: First I came up with a logo design in Adobe Illustrator. Next I copied that logo into Adobe InDesign. I started on the letterhead after I figured out the logo design. The letterhead has a blueprint background with the logo. Then I added information to the letterhead and media information. I placed everything so it looked nicely on the letterhead.

LogosDescription: Logo for a housing complex.

Programs Used: Adobe Illustrator

Date: 6/6/15

Course/ Instructor: Comm 130 Section 6 Brother Judkins

Objective: To create a logo used for a business. This logo looks sleek and draws people to my business.

Process:First I thought of logo ideas. Then I made three different logos with one of the designs I chose. From those three I chose one and did three different themes on that same logo idea. I learned how to use the pen tool. The font I used helped bring my logo together. I used the triangles on the end of the font to make it look like an arrow. I made the A and H have arrows on them for Arrow Housing. Then I used a different font to say what the logo letters stood for. Arrow housing is a smaller font. All together the design came out to a nice logo.

Arrow Housing

H

HArrow Housing

Arrow Housing

HArrow Housing

MontageDescription: An inspiration montage where I blended together three images to make it look like the images went together.

Programs Used: Adobe Photoshop

Date: 5/29/15

Course/ Instructor: Comm 130 Section 6 Brother Judkins

Objective: I wanted to show that we need to do more temple work. Souls have been waiting for years for their work to be done. We can get caught up with life and we often forget to do the work of others.Hence why I used the Forget-me-nots and this topic was part of one of Uchtdorf s talks.

Process:First I brainstormed ideas and looked up images that could work together. Once I found my background image I cropped it to 8.511. Next I added the Forget-me-nots into the background image. The I applied a mask to it and played with the opacity. I used the black paint and 100% opacity to get rid of the hard edges on the Forget-me-not picture. Then I took the black paint down to a lower opacity of 25% to take away some of the picture. It made the Forget-me-nots look hazy over the temple and thats the effect I was going for. Then I added in the hands reaching for each other and I repeated the steps for this image. I dragged this image into the background image. I placed the hands where I thought they would blend the best. I used the black paint and 100% opacity to help the image to blend better. The image was very bright so I had to darken it by using a 40% opacity. This helped me to control what was being hidden and to darken certain areas more than others. Next I found a quote I wanted to use. I put the text on the background image. I made sure to have two different fonts and change the font sizes, so some words stick out more than other words. The words were hard to read so I added a drop shadow behind them. This process was done in Adobe Photoshop.

ImagingDescription: Learning to take good photos and apply Photoshop edits to it. Then apply that image into a design that uses a color scheme.

Programs Used: Adobe Photoshop

Date: 5/23/15

Course/ Instructor: Comm 130 Section 6 Brother Judkins

Objective: To learn how to take photos and edit them using photoshop.

Process:I first took all my photos then choose one that I wanted to use. From that image I picked a color scheme from Sister Esplins color wheel. Next I came up with the quote that would work best with my image. From there I put it all together to make an appealing design.

Web PageDescription: Using HTML and CSS to create a web page using a logo I designed.

Programs Used: HTMLCSS

Date: 6/28/15

Course/ Instructor: Comm 130 Section 6 Brother Judkins

Objective: A webpage for Arrow Housing to tell others what process I went through to make this logo using HTML and CSS in Notepad

Process:First I followed the HTML code in Notepad and added information for my webpage. I inserted my logo into the HTML file. I followed the coding instructions and filled in what information I wanted my webpage to display. Next using CSS in Notepad I changed the typography for the website. I put in a background image that went well with my logo. I changed the font colors to match the color scheme better. I played around with CSS to fig-ure out what would look best for my webpage.

FlierDescription: Black and white promotional flier for the Graduate Leadership Conference.

Programs Used: Adobe InDesign

Date: 5/9/15

Course/ Instructor: Comm 130 Section 6 Brother Judkins

Objective: I am trying to inform recent graduates about this conference that will give them the com-petitive edge in business. They will gain real experience working with Vouant Communica-tions to learn essential leadership skills in the workplace

Process:I first sketched out some ideas for this flier. Then using Adobe InDesign I created one of my sketches into a flier. I used boxes in my design for repetition and to give my flier great flow. I emphasized one word in my title to create more of a contrast. The body copy I kept bigger so I could capture my audiences eye. The contrast in the text box was to draw people in to the information about the graduate leadership conference. I left white space to give flow throughout the design and also contrast. I was given the image, logo, and content for this flier.

GraduateLeadership Conference

October 218 a.m. -5 p.m. Lincoln Convention Center

Do you want to have the competitive edge in business?

Come learn how at Vouant Communications annual Graduate Leadership Conference.

Vouant Communications is devoted to helping tomorrows leaders gain essential leadership skills in the workplace. During this dynamic three-day seminar, attendees will meet with top executives of Vouant Communications to discuss breakthrough leadership techniques, while cultvating attributes of leadership that will market to any employer.

Conference is available to graduating seniors. Space is limited.

Registration and more information available at http://www.vouantcomm.com/leaders

Event AdDescription: Event Ad for Nike to sponsor.

Programs Used: Microsoft Word

Date: 5/16/15

Course/ Instructor: Comm 130 Section 6 Brother Judkins

Objective:Help another kid by buying shoes today. All the proceeds go to buying them shoes.

Process:I first came up with the design after I picked my image. I scanned in my image then in-serted it into word. Next I came up with the event and where people could donate. Then I added the date and time for the event. Finally I figured out where everything should go, and what would look best for the flier.