Potain Igo 36Product Guide

Features•4000 kg (8818 lb) maximum capacity

•1100 kg (2425 lb) capacity at 32 m (105 ft) radius

•32 m (105 ft) maximum operating hook radius

•30,7 m (101 ft) maximum hook height with jib set at 20˚

•22 m (72 ft) maximum hook height with jib horizontalFEM 1.001-A3EN 14439 C25

Features

BallastThe optional ballasting derrick allows the operator to easily and precisely place the counterweight in position.

Outrigger footprintsTwo operating outrigger footprints are available for the Igo 36:• Square: 4 x 4 m (13.1 x 13.1 ft)• Rectangular (requires additional ballast) 3,5 m x 4,42 m (11.5 x 14.5 ft )

Wireless remote controlWireless radio remote control with indicators allows operation of the unit within an approximate three-hundred foot radius.

Small footprint and quiet operationThe Igo 36’s limited space requirement and quiet operation make it the ideal choice for many jobsites including those in residential areas.

Transport axle setsOptional transport axles for site and highway applications are able to be removed without the assistance of another crane.

Contents

Specifications 4

Transport 5

Dimensions 7

Load charts 8

Crane profile and working range 9

Mechanisms 10

Metric dimensions 11

Metric load charts 12

Metric crane profile and working range 13

Metric mechanisms 14

Symbols glossary 15

4*Denotes optional equipment

**Requires optional anemometer

Specifications

Jib

32 m (105 ft) radius standard folding offsettable lattice jib. Removable jib extensions can allow additional horizontal jib operating radii of 25 m (82 ft) or 28,25 m (93 ft). One (1) tie bar line with adjustable lengths allows jib to be offset 8° and 20°. Two (2) erecting speeds controlled from the remote, opening and aligning are carried out automatically by a hydraulic cylinder.

Jib

Outriggers swing and lock into position. Two outrigger spreads possible: 4 m x 4 m (13.1 ft x 13.1 ft) or 3,5 m x 4,42 m (11.5 ft x 14.5 ft) both with 2,2 m (7.2 ft) slewing radius. Level bubble is integrated into the chassis. Outrigger pads are stowed on the crane during transport.

Axle sets are available for both jobsite and highway applications. Jobsite axles are rated at either 10 km/h (6 mph) or 25 km/h (15.5 mph); highway axle set is rated at 80 km/h (50 mph).

480 volt, 60 Hz measured at the turntable. Earth rod and electric cable stowed on the crane during transport.

SM/DM block for 2 or 4-part line. One pin removal to change between SM and DM. Pure SM1 (section of hook block removed) is possible with gain of 100 kg (220 lb) lifting capacity.

Wireless remote control provides information to the operator about **wind speed, radius, hook height, load, and moment. Lights and buzzers alert the operator when nearing limits of operation.

Auxiliary remote attached by umbilical cord ensures continual operation in case of battery or other malfunction of the wireless remote control.

Electronic wind speed meter (anemometer) to alert the operator of wind speed conditions. Provides selective display on the radio remote. Crane can be operated in wind speeds up to 72 km/h (45 mph) and weather vane in winds up to 150 km/h (93 mph).

RVF+41 slewing mechanism with maximum swing speed of 0.8 rpm. Progressive control of speed with counter-slewing possible, anti-load swinging system makes aligning the load and jib easier. Multiple rpm speeds possible depending upon parameter selected.

15 LVF 10 Optima: 15 HP variable frequency hoist with 1.1 USt (1 t) line pull. 3 notch, progressive speed change according to the accelerating or decelerating ramps. Optima allows the hoist to adapt its speed to the weight of the load.

3 DVF 5: 3 HP variable frequency hoist with 500 kg (1102 lb) line pull. 2 notch winch, progressive speed change according to acceleration or deceleration ramps controlled by the frequency converter.

Cylinders for erecting the crane linked to solenoid valves. One (1) cylinder for unfolding the jib and one (1) for raising the mast.

* STANDARD NORTH AMERICAN SPECIFICATION: includes additional lateral ballast blocks, manual ballasting derrick, high sole plates, Dialog Wind, container preparation and cold weather kit.

* High sole pads * Transport axles and kits* Top Zone* Top Tracing* Dialog Wind

Consult price list for additional options.

ChassisChassis

*Optional transport axle setsElectrical requirementElectrical Requirement

ReevingReeving

*Optional AnemometerAnemometer

ControlsControls

SwingSwing

HoistHoist

TrolleyTrolley

Hydraulic equipmentHydraulic Equipment

*Optional equipment

Galvanized folding mast with hydraulic cylinder for erection. Two (2) erecting speeds controlled from the remote. No locking necessary. 360˚ rotation possible during erection.

MastMast

Uses the hoisting winch to ballast the crane or dismantle/attach *fifth-wheel. Stows alongside the jib during transport.

*Optional manual ballasting derrick

5200 kg (11,464 lb) ballast standard. Crane with standard ballast is able to be transported on several *axle sets. *Additional ballast available for a total of 21 200 kg (46,734 lb) for square outrigger spread or 24 400 kg (53,793 lb) for optional rectangular outrigger spread.

BallastBallast

Ballasting Derrick

5Potain Igo 36

Transport

NOTE: Dimensions and weights may vary due to manufacturing tolerances.

DS62 / S120 10 km/h / 6 mph

SL121 / J135 25 km/h / 15.5 mph

15,48 m (50.8 ft)

14 m (45.9 ft)

2,35 m (7.7 ft) 3,73 m (12.2 ft) 7,08 m (23.2 ft)

2,4 m (7.9 ft)

Max: 0.36 m (1.2 ft)Min: 0.21 m (0.7 ft)

Max

: 3,2

m (1

0.5

ft)

Min

: 3,0

5 m

(10

ft)

P2 P P1

16,03 m (52.6 ft)

3,5

8 m

(11.7

ft)

1,88 m (6.2 ft)

1,26 m (4.2 ft) 0,74 m (2.4 ft)

3,34 m (11 ft) 3,94 m (12.9 ft) 6,87 m (22.5 ft)

2,45 m (8 ft)

P2 P P1

6

Weights

Note: Dimensions and weights may vary due to manufacturing tolerances.

SL122 / J215M 80 km/h / 50 mph

16,03 m (52.6 ft)

P2 P P1

10,81 m (35.5 ft)

1,88 m (6.2 ft)

1,26 m (4.2 ft) 0,74 m (2.4 ft)

3,34 m (11 ft)

7,41 m (24.3 ft)

4,07 m (13.4 ft)

6,74 m (22.1 ft)

2,45 m (8 ft)

3,58

m (1

1.7 ft

)

Chassis data (in transort position)DS62/S120

10 km/h (6 mph)SL121/J136

25 km/h (15.5 mph)SL122/J215M

80 km/h (50 mph)

meters (feet) meters (feet) meters (feet)

Overall length 15,48 50.8 16,03 52.6 16,03 52.6

Overall height Max: 3,20Min: 3,05

Max: 10.5Min: 10 3,58 11.7 3,58 11.7

Overall width 2,4 7.9 2,45 8 2,45 8

Overhang 7,08 23.2 6,87 22.5 6,74 22.1

Weights

Crane weight less counterweight:

10 400 kg 22,928 lb

Counterweight for operation: 21 200 kg 46,737 lb

Crane with counterweight: 31 600 kg 69,665 lb

*square footprint

Crane with transport equipment

DS62/S12010 km/h (6 mph)

SL121/J13625 km/h (15.5 mph)

SL122/J215M80 km/h (50 mph)

In transport with minimal counterweight:

kilograms (pounds) kilograms (pounds) kilograms (pounds)

Gross (P) 16 360 36,068 20 685 45,602 24 955 55,016

Rear (P1) 10 380 22,884 12 760 28,131 14 398 31,742

Front (P2) 5980 13,184 7925 17,471 10 557 23,274

Counterweight in transport:

5200 11,464 8400 18,519 11 600 25,573

7Potain Igo 36

Dimensions

68 ft10 ft

8818 lb

2425 lb

8818 lb

8818 lb

7937 lb

3748 lb

35 ft

105 ft 72 ft

72 ft93 ft38 ft

39 ft82 ft 72 ft

21,3 m46 ft

3086 lb

3 ft

85 ft

14.4 ft13.7 ft

13 ft x 13 ft 11 ft x 15 ft

R = 7 ft

5 ft

F1

F1 22.5 USt 17 USt

22,487 lb46,734 lb

(2 x 5732 lb + 10 x 3527 lb)

F1 22.5 USt 17 USt

F1

8

Load charts

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

105 ft 10 42 43 46 ft8818 8708 7937 lb

4409 lb4409 lb

93 ft 10 42 43 46 ft8818 8708 7937 lb

4409 lb4409 lb

82 ft 10 42 43 46 ft8818 8708 7937 lb

4409 lb4409 lb

35 36 39 43 46 49 52 56 59 61 62 64 66 72 82 89 98 105 ft8818 8532 7628 6689 6272 5754 5313 4916 4586 4409 4277 4145 4012 3560 3031 2756 2403 2205 lb

4409 4277 4145 4012 3560 3031 2756 2403 2205 lb4409 4277 3814 3274 2976 2624 2425 lb

38 39 43 46 49 52 56 59 62 66 69 72 82 89 93 ft8818 8356 7540 6878 6305 5820 5401 5027 4707 4409 4156 3924 3351 3031 2866 lb

4409 4156 3924 3351 3031 2866 lb4409 4167 3571 3263 3086 lb

39 43 46 49 52 56 59 62 66 68 69 72 75 82 ft8818 7937 7231 6636 6118 5688 5291 4960 4652 4409 4376 4178 3913 3527 lb

4409 4376 4178 3913 3527 lb4409 4134 3748 lb

105 ft 10 60 62 64 69 75 82 85 92 98 104 ft4409 4211 4068 3715 3318 2987 2844 3855 2370 2205 lb

4409 4034 3616 3274 3120 2855 2624 2425 lb

93 ft 10 65 68 69 75 82 85 92 ft4409 4167 4101 3660 3307 3142 2866 lb

4409 4354 3902 3538 3373 3086 lb

82 ft 10 68 71 75 81 ft4409 4178 3869 3527 lb

4409 4101 3748 lb

105 ft 10 99 ft2205 lb2425 lb

93 ft 10 87 ft2205 lb2425 lb

82 ft 10 78 ft2205 lb2425 lb

7937 lb

46 ft2425 lb

93 ft82 ft 105 ft

3086 lb3748 lb

4409 lb

46 ft

73 ft

81 ft

3748 lb

78 ft

8°92 ft

79 ft

104 ft

81 ft3086 lb

2425 lb

2425 lb

44 ft

81 ft

78 ft

2425 lb

93 ft

87 ft

2425 lb

96 ft20°101 ft

99 ft

2425 lb

9Potain Igo 36

Crane profile and working range

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane

Jib raised 8° Jib raised 20°

20 13 7 0 7 13 20 26 33 39 46 52 59 66 72 79 85 92 98 105 112 ft26

7

13

20

26

33

39

46

52

59

66

72

79

85

92

98

105

112

118

125

131

138 ft

0

8°

46 ft 81 ft 92 ft 104 ft

73 ft

78 ft81 ft

79 ft

Jib raised 8°

46 52 59 66 72 79 85

79

85

92

98

105

92 98 105 112 ft

112

118

125

131

138

144 ft

26 13 7 0 7 13 20 26 33 39

2

13

20

26

33

39

46

52

59

66

72

200

20°

Jib raised 20°

99 ft

101 ft

87 ft

96 ft93 ft

78 ft

81 ft

44 ft

46 52 59 66 72 79 85

79

85

92

98

105

92 98 105 112 ft

112

118

125

131

138

144 ft

26 13 7 0 7 13 20 26 33 39

7

13

20

26

33

39

46

52

59

66

72

200

≤ 31 mph

10

Mechanisms

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

Hoisting

Trolleying

Slewing

Traveling

IEC 60204-32

400 V (+10% -10%) 50 Hz480 V (+6% -10%) 60 Hz 22 kVA

400 V - 50 Hz480 V - 60 Hz hp kW

15 LVF 10 Optima

fpm 12 59 98 177 217 6 30 49 89 10815 11

lb 4409 4409 4409 2205 1102 8818 8818 8818 4409 2205

3 DVF 5 fpm 49 - 98 - 135 3 2.2

RVF 41 Optima+ rpm 0 0.8 4 3

4409 lb

+25 %

1102 2205

fpm

0

217

177

98

0

11Potain Igo 36

Metric dimensions

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane

20,8 m3 m

4000 kg

1100 kg

4000 kg

4000 kg

3600 kg

1700 kg

10,7 m

32 m 22 m

21,9 m28,25 m11,5 m

12 m25 m 21,8 m

21,3 m14 m

1400 kg

0,9 m

26 m

4,39 m4,19 m

4 m x 4 m 3,5 m x 4,42 m

R = 2,2 m

1,45 m

F1

F1 20,4 t 15,4 t

10 200 kg21 200 kg

(2 x 2600 kg + 10 x 1600 kg)

F1 20,4 t 15,4 t

F1

12

Metric load charts

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

32 m 3 12,87 13 14 m4000 3950 3600 kg

2000 kg2000 kg

28,25 m 3 12,87 13 14 m4000 3950 3600 kg

2000 kg2000 kg

25 m 3 12,87 13 14 m4000 3950 3600 kg

2000 kg2000 kg

10,7 11 12 13 14 15 16 17 18 18,5 19 19,5 20 22 25 27 30 32 m4000 3870 3460 3125 2845 2610 2410 2230 2080 2000 1940 1880 1820 1615 1375 1250 1090 1000 kg

2000 1940 1880 1820 1615 1375 1250 1090 1000 kg2000 1940 1730 1485 1350 1190 1100

11,5 12 13 14 15 16 17 18 19 20 21 22 25 27 28,25 m4000 3790 3420 3120 2860 2640 2450 2280 2135 2000 1885 1780 1520 1375 1300 kg

2000 1885 1780 1520 1375 1300 kg2000 1890 1620 1480 1400 kg

12 13 14 15 16 17 18 19 20 20,8 21 21,8 23 25 m4000 3600 3280 3010 2775 2580 2400 2250 2110 2000 1985 1895 1775 1600 kg

2000 1985 1895 1775 1600 kg2000 1875 1700 kg

32 m 3 18,3 19 19,5 21 23 25 26 28 30 31,7 m2000 1910 1845 1685 1505 1355 1290 1175 1075 1000 kg

2000 1830 1640 1485 1415 1295 1190 1100 kg

28,25 m 3 19,8 20,8 21 23 25 26 28 m2000 1890 1860 1660 1500 1425 1300 kg

2000 1975 1770 1605 1530 1400 kg

25 m 3 20,7 21,6 23 24,8 m2000 1895 1755 1600 kg

2000 1860 1700 kg

32 m 3 30,25 m1000 kg1100 kg

28,25 m 3 26,5 m1000 kg1100 kg

25 m 3 23,7 m1000 kg1100 kg

3600 kg

14 m1100 kg

28,25 m25 m 32 m

1400 kg1700 kg

2000 kg

13,9 m

22,2 m

24,8 m

1700 kg

23,7 m

8°28 m

24,2 m

31,7 m

24,7 m1400 kg

1100 kg

1100 kg

13,3 m

24,6 m

23,7 m

1100 kg

28,3 m

26,5 m

1100 kg

29,4 m20°30,7 m

30,25 m

1100 kg

13Potain Igo 36

Metric crane profile and working range

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane

Jib raised 8° Jib raised 20°

14 16 18 20 22 24 26

24

26

28

30

32

28 30 32 34 m

34

36

38

40

42

44 m

8 4 2 0 2 4 6 8 10 12

2

4

6

8

10

12

14

16

18

20

22

6

20°

Jib raised 20°

30.24 m

30.8 m

26.5 m

29.4 m28.4 m

23.67 m

24.6 m

13.3 m

14 16 18 20 22 24 26

24

26

28

30

32

28 30 32 34 m

34

36

38

40

42

44 m

8 4 2 0 2 4 6 8 10 12

2

4

6

8

10

12

14

16

18

20

22

6

8°

13.9 m 24.8 m 28 m 31.7 m

22.2 m

23.8 m24.7 m

24.2 m

Jib raised 8°

6 4 2 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 m8

2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

32

34

36

38

40

42 m

0≤ 50 km/h

14

Metric mechanisms

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

Hoisting

Trolleying

Slewing

Traveling

IEC 60204-32

400 V (+10% -10%) 50 Hz480 V (+6% -10%) 60 Hz 22 kVA

400 V - 50 Hz480 V - 60 Hz hp kW

15 LVF 10 Optima

m/min 3,6 18 30 54 66 1,8 9 15 27 3315 11

kg 2000 2000 2000 1000 500 4000 4000 4000 2000 1000

3 DVF 5 m/min 15 - 30 - 41 3 2,2

RVF 41 Optima+ rpm 0 0,8 4 3

2000 kg

+25 %

500 1000

m/min

0

66

54

30

0

15Potain Igo 36

Symbols glossary

Controls

Ballasting derrick

Jib

ChassisOutrigger

BallastElectrical requirement

Reeving

Hydraulic equipment

Trolley

Swing

Transport axle

Mast Anemometer

Hoist Jib extension

Potain GMA Glossary 4.4.07

©2011 ManitowocForm No. Igo 36 PGPart No. 05-003-2M-0911 www.manitowoc.com

This document is non-contractual. Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment, and price changes without notice. Illustrations shown may include optional equipment and accessories and may not include all standard equipment.

Regional offices

ChinaShanghai, China Tel: +86 21 6457 0066Fax: +86 21 6457 4955

Greater Asia-Pacific Singapore Tel: +65 6264 1188 Fax: +65 6862 4040

Europe, Middle East, Africa Ecully, France Tel: +33 (0)4 72 18 20 20 Fax: +33 (0)4 72 18 20 00

Americas Manitowoc, Wisconsin, USA Tel: +1 920 684 6621 Fax: +1 920 683 6277

Shady Grove, Pennsylvania, USA Tel: +1 717 597 8121 Fax: +1 717 597 4062

Regional headquarters

Manitowoc Cranes

ChinaBeijingChengduGuangzhouXian

Greater Asia-PacificAustraliaAdelaideBrisbaneMelbourneSydneyIndiaCalcuttaChennaiDelhiHyderabadPuneKoreaSeoulPhilippinesMakati CitySingapore

FactoriesBrazilAlphavilleChinaTaiAnZhangjiagangFranceCharlieuMoulinsGermanyWilhelmshavenIndiaPuneItalyNiella TanaroPortugalBaltarFânzeresSlovakiaSarisUSAManitowoc Port WashingtonShady Grove

AmericasBrazilAlphavilleMexicoMonterreyChileSantiago

Europe, Middle East, AfricaCzech RepublicNetvoriceFranceBaudemontCergyDecinesGermanyLangenfeldHungaryBudapestItalyLainateNetherlandsBredaPolandWarsawPortugalBaltarRussiaMoscowU.A.E.DubaiU.K.Buckingham