pott shrigley st christopher - path · proposed new path for disabled access to the churchyard...
TRANSCRIPT
Supporting Documentation Pott Shrigley St Christopher - Path
Note to parish
This bundle includes all the supporting documentation to your faculty application as required
under Rule 5.5 of the Faculty Jurisdiction Rules 2015.
List of documentation
Item Description Page
Overview
1 Statement of Need dated August 2019 2
2 Statement of Significance uploaded 26 January 2020 7
3 Schedule of Works or Proposals from the Petition for Faculty dated 26 January 2020 10
Proposals
4 Drawing number 4054.6.1 of Graham Holland Associates dated July 2019 (received 16
September 2019)
11
5 Drawing number 4054.6.2 (Rev 2) of Graham Holland dated July (revised October)
2019 received 23 January 2020
12
6 Schedule of Work and Specification of Graham Holland dated October 2019 received
23 January 2020
13
7 Quotation of Greenwood Joinery & Building Services dated 26 January 2020 38
8 Drawing number 4054.6.2 (Rev 3) of Graham Holland Associates dated November
2019 received 5 February 2020
39
9 Product details of iGuzzinin Walky horizontal wall light received 29 April 2020 40
10 Drawing number 4054.6.4 of Graham Holland Associates dated April 2020 received 29
April 2020
41
11 Drawing 4050.6.3 of Graham Holland Associates dated April 2020 received 29 April
2020
42
Correspondence
12 Email correspondence between DAC office and parish dating from 28 August 2019 to
30 April 2020
43
Consultation
13 Planning permission decision notice of Peak District National Park dated 17 April
2020 received 29 April 2020
47
PCC Minute
14 PCC minute dated 30 April 2019 50
__________________________________________
Caroline Hilton, DAC Secretary 21 May 2020
1 of 50
Pott Shrigley St. Christopher
Proposed new path for disabled access to the Churchyard
Statement of Need Background St. Christopher’s Church, Pott Shrigley is popular and well attended. Typical Sunday congregations are approximately 15 adults at the 8.30am Communion service and approximately 60 adults and 12 children at the 10.45am service. There are approximately 120 people on the electoral roll. A Praise and Play toddlers’ group meets weekly and the Church Guild (mostly retired people) meets monthly in the church building. In addition, approximately 10 weddings are conducted in the church each year and a similar number of funerals. During 2019, plans are being progressed that will bring more visitors to the church and churchyard outside of the times of regular and occasional services – the PCC is progressing plans for the church building to be open to visitors during daylight hours and the Commonwealth War Graves Commission are erecting a plaque by the church entrance to give notice that the graveyard contains Commonwealth war graves. The lych gate at the main entrance to the churchyard on Shrigley Road is also the village war memorial and attracts visitors in its own right. Accessibility for disabled people (and babies in prams) into the church building itself and within the building is good as the building is all on a single level and there is no step at the doorway. The church toilet is also suitable for wheelchair users. However, the lych gate (the man entrance to the churchyard and hence church) includes 2 stone steps. Access for wheelchairs and prams was previously provided by a steep metal ramp sitting across half the width of the steps. This ramp was steeper than current standards for disabled access and prone to icing in the winter. It was removed on the decision of the PCC following an accident to a member of the congregation who slipped and fell on the ramp on an icy morning. The Need The PCC believe it is important that the church, churchyard and lych gate are easily accessible to wheelchair users and to people with prams and hence want to provide suitable access for this. Proposal It is proposed to form a new opening in the churchyard wall immediately to the left of the lych gate when viewed from Shrigley Road, and form a new, sloping path that initially will follow the inside of the churchyard wall and then turn through right angles to join the existing path a short distance from the lych gate – see attached sketch. Handrailing will be provided to both sides of the new path. The curved coping stonework of the churchyard wall currently immediately adjacent to the lych gate will be re-used to form the end of the wall adjacent to the new opening.
2 of 50
A small shrub will be removed, and the church sign re-located to further along the wall. Site investigation has confirmed that the dressed stonework of the lych gate wall adjacent to the proposed new opening continues down to the current ground level alongside the lych gate but no lower. Hence a low stone wall will be built at the foot of the side-wall of the lych gate to conceal its foundations. This part of the churchyard has not been used for burials. The new path will be surfaced with asphalt to match the existing churchyard path and provide maximum grip. A stone edging will be provided adjacent to the lych gate steps. Why is this needed, and why now? The Church of England states that churches have a responsibility to make sure that, as far as is reasonably possible, their buildings and activities are accessible to everyone. Ramped access used to be provided to the churchyard and hence the lych gate war memorial and the church by a steep metal ramp but this was removed following an accident to a member of the congregation in icy weather. Work to develop an alternative ramped access was started at this time but then suspended whilst the PCC developed proposals for an extension to the church building which could have delivered alternative access routes with no steps. However, PCC resolved in June 2019 that these extension proposals should not be progressed further, hence requiring this proposal to be raised. Justification The proposals have very low impact on the significance of the church and the churchyard. The only aspects that will be physically modified are a very small section of the churchyard wall to create the opening for the new path, and the small piece of land within the churchyard where the new section of path with retaining walls will lie. The view of the churchyard and church from outside the lych gate will be slightly altered but not impaired, and the immediate setting of the telephone kiosk will not be impacted. The public benefits of providing non-stepped access for disabled persons and people with prams to be able to readily and independently access the church building and the lych gate war memorial are seen by the PCC to significantly outweigh any perceived harm caused by the changes proposed. Alternatives considered Provision of a new metal ramp of greater length to give a gentler slope has been evaluated and rejected as it would impede the already limited car-parking provision for the church and neighbouring cottages, be vulnerable to damage from cars, and the land beyond the lych gate is not owned by the church. Such a ramp would also impede access for people wishing to use the steps. A permanent, stone-built ramp outside the lych gate would present even greater issues about the land ownership.
3 of 50
Lowering the existing stone slab paving within the lych gate and reconstructing the existing path to an appropriate gradient has been rejected as it could impact the foundations and structural integrity of the lych gate, the site investigation indicates that the dressed stonework of the lych gate does not continue below the current level of the slabs, and it would change the appearance of an old structure that is important to the local community. Forming a new entrance and path to the right of the lych gate as viewed from Shrigley Road would adversely impact the roots of a large (and hence old) yew tree. The two other entrances to the churchyard are not suitable for modification for wheelchair users – one is too narrow, has 4 steep steps and opens immediately on to the roadway of Shrigley Road; the other is only accessible via a dirt track with nowhere suitable for a car to drop-off and collect a wheelchair user. David Garton Churchwarden August 2019
4 of 50
Lych gate viewed from Shrigley Road
Lych gate viewed from within the churchyard
5 of 50
6 of 50
Pott Shrigley St. Christopher
Proposed new path for disabled access to the Churchyard
Statement of Significance 1. History and description of the church building, contents, churchyard and setting 1.1 Summary history of the church Very few records have come down from early history regarding Pott Shrigley. The two names relate to two distinct settlements – Pott in the south, near Bollington, and Shrigley to the north, near Poynton. The homes of the respective leading families for each – Pott Hall and Shrigley Hall – remain at their original sites although much changed over the centuries. The earliest facet of the church and churchyard is a Preaching Cross in the churchyard which has been estimated as 10th Century. When William de Downes married Maud Shrigley in 1313 he became Lord of the Manor of Pott Shrigley. This was a thriving estate on good but hilly country, with farming and forestry. By the 15th Century mining for coal and the underlying “bakestone” (fireclay) was carried out on the slopes of the valleys where the narrow seams of coal came close to the surface and were accessible. The Lord of the Manor was then also the patron of Pott Chapel, a chapel of ease of Prestbury Parish. The then chapel building is now the chancel of the current church. By the end of the 14th Century, the nave had been built and the north aisle added. It is possible that there was some form of open-air belfry at the west end of the nave as the church has an early “Ring of Three” bells dated to 1430 (by an unknown source), cast by Robert Crowch. Alternatively, these bells may have hung elsewhere until the tower was built (see below). The Downes family remained at Shrigley Hall for five centuries but it is unknown whether they were the actual sponsors of these works. The earliest firm date regarding the church is provided by the 1492 will of Geoffrey Downes. In this, he refers to the south aisle built to be his chantry and makes provision for the building of the tower and the payment of a priest to conduct services. It is unknown when the tower was actually built but it probably dates from the early 16th century with battlements and pinnacles added in the 19th century. The will also provided for the building of a school within the churchyard but no traces of this exist today – the current school building in the village was built in the early 1820’s. In 1880, a new parish of St Christopher’s Pott Shrigley was created, independent of Prestbury with Rev George F Apthorp as the first vicar. The South Porch was added to the church in 1907 and a small extension added to the north side of the church in 2001 to provide a toilet. 1.2 Description of the church building and contents
7 of 50
The church is built in millstone grit random rubble with dressings of brown, grey and red sandstone to windows and doorways, except for the tower which is of narrow slabs of grey millstone grit. The tower’s diagonal buttresses, instead of being sharply defined from the main walls, die into them, rounded off in a curious manner, so that it is difficult to say where the walls finish and the buttresses begin. The roof is of (local) Kerridge stone tiles and of camber beam construction in the nave and chancel with a barrel ceiling internally in the nave. The south aisle has an arcade of octagonal piers; the north aisle is carried on a cluster of 3 colonnettes Most windows are stained glass with the majority dating from the 19th century. The main east window was restored in 1872 and contains some medieval glass. The box pews are oak and, it is believed, came originally from Gawsworth when that church was being re-ordered in the 19th century. The communion rails are of an early period and consist of turned balusters placed between oak top and bottom rails. The oak Holy Table with the 1698 date forming part of its decoration is thought to have originated as a Jacobean dining table, and the font at the rear of the church is also stated to be Jacobean. 1.3 Description of the churchyard The churchyard lies to the west, south and east of the church and is wholly within the Pott Shrigley Conservation Area and the Peak District National Park. The oldest part of the churchyard is delineated from the rest by a series of lime trees – it is thought that the gravestones in this area were mostly sunk and covered in grass to create a greensward in the late 19th century. The remainder of the churchyard results from a number of expansions over the centuries, contains a small number of reasonably old yew trees and has gravestones of numerous sizes, shapes and materials (more harmonized in recent years). The oldest graves marked by stones date from 1768 and 1782. Two grave plots are Commonwealth War Graves Commission graves with three casualties interred in them – one from World War 1 and two from World War 2. The churchyard is walled along its entire boundary except for three gateways – a small pedestrian gate in the north boundary, a larger gate in the west boundary immediately facing the west door, and the (now) main entrance via the lych gate in the south east of the churchyard. The wall is of coursed local stone with larger slabs as a coping. Along some of the east boundary the churchyard is higher than the bordering road such that the wall is a retaining wall. Although clearly of some age, there are no records of when the wall was built – the listing details for the Grade II listed Church Cottages adjacent to the south of the churchyard record their construction as mid – 19th century but later than 1849 and it is possible the current churchyard wall was built at the same time. A Grade II listed preaching cross stands in the churchyard immediately to the south of the church. Its listing details record that the base is probably medieval and made of two large, square stone blocks, the upper with ET cut into it. The cross has a tall octagonal shaft and cross-piece perhaps added when the cross was repaired in the late 18th century / early 19th century. A Grade II listed Type K6 telephone kiosk stands just outside the churchyard to the east of the lych gate. A small area of trees subject to a Tree Preservation Order stand on land owned by the church but immediately outside and to the north-west of the walled churchyard.
8 of 50
The lych gate dates from 1920 and bears the inscription “Erected by the Parishoners of Pott Shrigley 1920 as a memorial of the Great War 1914 – 1918 and to commemorate all those then belonging to the Parish who served their King and Country”. Its construction is low sidewalls of coursed stonework supporting an oak frame and pitched roof of Kerridge stone slabs. Engraved stone slabs supported in the oak frame record the names of those killed, wounded and who served. There are no records as to its design or construction. The lych gate is paved with large stone slabs and has two stone steps at its entrance; a tarmacadam path then leads part way across the churchyard to join paved stone paths leading to the south porch and west door. There are no records of and no evidence on the ground of burials ever having occurred to the south of the tarmacadam path (the area concerned in the proposal). 2. The significance of the church (including its contents and churchyard) Pott Shrigley Church is Grade I listed and of High significance (using Church Building Council definitions). Its detail is not considered further in this document as the proposal does not impact the building. The churchyard as a whole as the setting for the church building is of Moderate significance but individual features of it (the churchyard wall, the lych gate) are of Low-Moderate significance with the exception of the Preaching cross (Moderate-High significance). Although outside the churchyard and not on church land, the K6 telephone kiosk and its setting adjacent to the churchyard wall should be mentioned and is of Low-Moderate significance. 3: Assessment of the impact of the proposals on the significance The proposals have very low impact on the significance of the church and the churchyard. The only aspects that will be physically modified are a very small section of the churchyard wall to create the opening for the new path, and the small piece of land within the churchyard where the new section of path with retaining walls will lie. There are no records of and no evidence on the ground of burials ever having occurred in this piece of land. The slightly unusual curved coping stone currently at the end of the wall adjacent to the lych gate will be re-used to form the end of the wall adjacent to the new path. The view of the churchyard and church from outside the lych gate will be slightly altered but not impaired, and the immediate setting of the telephone kiosk will not be impacted. David Garton Churchwarden Pott Shrigley St Christopher
9 of 50
We petition the Court for a faculty to authorise the following-
Please fully and accurately state the works or other proposals for which a faculty is sought. Where relevant, include the number and date on the architect’s or surveyor’s drawings or other specifications. If it is proposed to dispose of any item details must be given.
The works or proposals must be the same as those in respect of which the Diocesan Advisory Committee has given any advice (subject to any modifications that have been made to take account of advice received – if any modifications have been made they also must be described here).
SCHEDULE OF WORKS OR PROPOSALS
To provide an "easy access" ramped pathway adjacent to the Lych Gate for wheelchair users and others, as described by:
Drawing 4054.6.1 July 2019 - Location PlansDrawing 4054.6.2 July 2019 - Layout and SectionsDrawing 4050.6.3 July 2019 - Handrail detailsSchedule of Work and Specifications GDH/JD/4054 October 2019
Copies of the Standard Information Form and any drawings, plans, specifications, photographs or other documents showing the proposals must be provided with this petition.
Page 2Thursday, February 06, 2020 3:45 PM
10 of 50
Po .b.C.ririst/DpliCr; 0,ct5 bir€2
9-Dec ss proposals 'r3D19 Z010 C,14/0 9 00 ii-054-
Cy acc, e d_ areas
Sl to pan 500'
n 'mtn) • Pc:
GRAHAM HOLLAND ASSOCIATES Architects & Historic Buildings Consultants
Winnington Hall, 'Cheshire, CW8 4DU lel 01606 624626. fax: 01606 674002 mobile: 07885 224256
Plas Draw, Ruthin, Denbighshire LL15 1RT tel: 01824 704709 fax: 01824 704912
91/ email: info@grahamhollandassociates co.uk
44
Rai kon
plan scale r50 93 bc.at_A 0 n Ian , L5 DO
at) hot- c c cd 1-In is . clAetiz- aLl ci eLcas (lc max sicsvic-, enk_ St te 1
11 of 50
•
Pott gi E. 1St. at) ri5tophw;
0.0 ualtltb ioe t,e.pair eat bo cot
ry\Aed, rued eine') coolv-ID)re-se.t
LikoreA.
'br
ruv>np 9 LiiLd
hanctv'ail c4b Vat:. et-1;
p[nir1hrt9 ikeiccAtAeci
kt>tle ifc1C,LivIketi Cr io a II 1.713 bQ osQct -c-or b~i id-vp lz)
h and_ v‘.(At Ket-firVI. Ct-ci-eps
ali
ra vorDp
plan sir 1 ct , not- scc4( e 1-11(.5-1 414--
L- 1
. La.(D._) - CaLESS prOpO5CAtc) 2E) ci
( CtUC% v • C7h
(),0 h vbbgr9
e\),e9 kF-e r
L
t
. •
cok.s y\ekA't ei
_ 1.- -4-4 I 1 1
o-&
DOV_Ir19 north
1. :0 111irrop ik-e0D1 I Alf ti
f\u‘sect CD}Pu e
cDp
%li AAA
cA-tA on M
If _
GRAHAM HOLLAND ASSOCIATES Architects & Historic Buildings Consultants
Wilmington Hail, 'Cheshire, CW8 4DU tel' 01606 624626. fax: 01606 674002 mobile: 07885 224256
Plas Draw, Ruthin, Denbighshire LL15 1RT tel: 01824 704709 fax: 01824 704912
email: [email protected]
at
on B Scale, I: 2.; A5, kiwt.tvi c„C) uth
ect(on C/C .1,0Virchic,3 boe.56
re 'v--n ivos w; X
Shr
30c> k 1119 Q•12,,;b 12 of 50
13 of 50
1.1
POTT SHRIGLEY, ST. CHRISTOPHER; EASY ACCESS RAMP
PREAMBLES
The Employer will be The Vicar, Churchwardens and Parochial Church Council c/o:
Mr. David Garton, New Hey Farm, Macclesfield Road, Rainow, Macclesfield, Cheshire, SK10 5UU.
Tel: 01625 573492.
Email: [email protected]
The Architect will be Graham Holland, Graham Holland Associates,
Winnington Hall, Cheshire, CW8 4DU. Tel: 01606 624626.
And at
Plas Draw, Ruthin, Denbighshire, LL15 1RT, Tel: 01824 704709.
Mobile: 07885 224256.
Email: [email protected].
The Project Comprises: Constructing an easy access ramp adjacent to the south east lych gate.
Drawings : The cover shows the church from the south
6.1 general floor, site & location plan as existing
6.2 plan elevations & sections as proposed
6.3 Details of ironwork & ramp construction
photographs
Location : The church is situated to the north of Bollington at Post Code SK10 5RS.
Pricing : A detail priced schedule and cash flow programme will be required before confirmation of
order, and, for each valuation. Including to attend a pre-contract site meeting.
CDM Regulations: On these works the current Construction (Design and Management)
Regulations are unlikely to be notificable; the contractor is to include for carrying out all duties of
the Principal Contractor, as defined in the Regulations.
These duties include taking account of the Health and Safety issues when preparing and presenting
tenders or similar documents; co-ordination of the activities of all contractors to ensure they
comply with Health and Safety legislation.
A statement of compliance with CDM Regulations is to be provided, covering such matters as
knowledge, resources, management structure etc., to enable the client to be satisfied that the
Principal Contractor is competent to carry out the work in accordance with the regulations.
14 of 50
1.2
Risk Assessment : Any risk assessment to be carried out and approved prior to
commencing work.
Outline Conditions & Site Work Risks Risk Level
Heavily traffic highway adjacent to the site.
Primary school opposite the site to the east High
Very busy at children delivery & ‘collection’ times!
Limited off street parking adjacent to the lych gate; no vehicular access onto the
site.
History of local vandalism – need for a high degree of security on site.
Medium
High
Electricity cables; arrange for protection during work. High
Slippery surfaces and limited working space on the roof. High
Working at high level and over publicly used paths. High
The lych gate will continue to be be used during the works; protect access. Note
Non-injurious materials to stonework and pointing except dust during raking out. Medium
Silca sand when cutting stonework. High
Sharp edges with steelwork and fixings. High
Working with heavy materials and lifting gear. High
Local bird and mammal fouling – protective clothing and masks needed. Medium
Public access to the church and yard must be maintained at all times. Note
The Contractor should and will be deemed to have visited the site prior to tendering
to acquaint himself of all aspects restrictions of the site.
No Sunday working will be permitted and works must cease during funerals and
occasional services as notified by the Employer. The church is to remain in use
during the works and access via the lych gate must be maintained & protected at all
times unless specifically agreed.
There is a supply of electricity and water for the use of the Contractor. The church lavatory may
be used by the Contractor with the agreement of the Employer and subject to strict cleanliness.
15 of 50
2.1
GENERAL CONDITIONS OF WORK, MINOR WORKS ‘CONTRACT, 2016 EDITION
A. Form of Contract: The Contractor will be required to sign the Agreement For Minor Building Works, issued by
the Joints Contracts Tribunal Ltd, together with the Contract drawings and the Specification and schedule. To be signed
‘under hand’.
The Articles of Agreement may be examined at the Architect’s office.
The following is a list of the Schedule of Conditions for which the Contractor is to make due allowance in his tender:
Section 1 Intentions of the parties
Section 2 Commencement and completion to be stated on the tender form; damages £250 per week;
the ‘rectification period’ is to be 12 months
Section 3 Control of the Works
Section 4 Payment: 21 days from issue of interim certificate; Retention: 5% (2.5% after practical
completion); final certificate; 12 months
Section 5 Contractor’s insurance: to be minimum £5,000,000
Injury, damage and insurance: clause 5.4B will apply.
Section 7 Determination
Settlement of disputes: RIBA.
B. Finance Act 1975: The Contractor’s attention is drawn to the Construction Industry Statutory Tax Deduction
Scheme provided for in the Finance (2) Act 1975 and all subsequent revisions. The provisions of the scheme are set out
in the Board of Inland Revenue booklet IR 14/15 (1982) and subsequent revisions. If the Employer is a ‘Contractor’
within the meaning of the Act, the Contractor will be required to satisfy the Employer that he holds a valid Sub-
contractor’s Tax Certificate before making payments to them.
C. Insurance of the Works: The Contractor must satisfy the Employer that adequate insurances have been taken out
to cover the works and /or as required, satisfy himself that the Employer has taken out required insurance cover as in the
case of works to existing buildings.
D. Pricing the Specification: All figures entered by the Contractor should be in ink. Should the Contractor leave
unpriced any items contained in the Spec/Schedule he shall be deemed to have included elsewhere in his tender for the
obligations and services described therein.
The Spec/Schedule has been prepared from and in conjunction with the noted drawings. The tenderer is to include for
all the works noted on the drawings; any apparent omission in the Schedule shall be deemed to be included.
The Contractor must examine all the documents and the site of work and satisfy himself of the full scope of the works
prior to tendering.
E. Visit to Site: The Contractor is strongly advised and will be deemed to have visited the site prior to tendering and
have examined the works in detail; where the building is secure permission to enter must be obtained from the Employer
with notice given to the Architect.
F. Alterations: No unauthorised alteration, deletion or addition is to be made by the Contractor to the text of the
Spec/Schedule, and any alteration, if made, will be deemed to be ignored and the text of the Spec/Schedule as printed
will be adhered to.
The tender figure submitted by the Contractor shall be deemed to be a true resultant total from correct arithmetical
extensions of all his rates.
G. Checking: The Spec/Schedule of the lowest tender received will be arithmetically checked, and if any errors are
discovered these will be corrected and carried to the Final Summary. The Contractor will be notified of any such
adjustments, and he shall be given the opportunity of agreeing to these adjustments, or of withdrawing his offer. The
Contractor will be deemed to have satisfied himself before submitting his tender as to the correctness of his tender as a
whole and of the prices and rates entered in the Spec/Schedule, which prices shall cover all an agreement, or otherwise
on entering into a Contract, it will be deemed and constructed as an acknowledgement on his part that he has so satisfied
himself.
The amount of the tender will be the sum at which the Contractor engages to execute the whole of the works as shown on the
drawings and set forth in the Specification and any item left unpriced in the Specification will be held to be included in the
prices of other items.
Due allowance must be made in the tendered programme for undertaking any repairs or works presently covered by
contingency and provisional sums.
The dates for commencement and completion are to be quoted on the contract form, a detailed programme; detailed itemised
priced Specification and Schedule will be required prior to an order being placed.
16 of 50
2.2
A. Name Boards: Provide and erect a comprehensive signboard to display the style of the contract, together with
particulars of the Contractor. The Architect, Quantity Surveyor and other professionals. Grant aiding Authority, e.g. the
H.L.F., will supply their own name boards each, size approximately 300mm x 1200mm for fixing by the Contractor. The
signboard is to be designed and constructed in a form prescribed by and agreed with the Architect.
B. Advertising Rights: Under no circumstances will the Contractor be allowed to use hoardings on any part of the building
for advertisement purposes.
C. Maintain Services: The Contractor shall maintain and protect public property including that of existing live drainage,
water, gas, electricity and other mains, or power services, under, on or over the site and is to make good or pay for
reinstatement of all damage thereto.
D. Delivery of Materials: The Contractor’s attention is drawn to the increasing delays experienced throughout the trade in
respect of materials deliveries and he is strongly recommended to ensure that orders are placed in adequate time with the
manufacturers to ensure delivery when required. Attention has been particularly directed to this as no extension of contract
time will be permitted for non-delivery of materials or equipment.
E. Samples: The Contractor shall furnish at his own cost any samples of materials, colours or workmanship, as may be
called for by the Architect for his approval or rejection, and any further samples in the case of rejection, until such samples are
approved. The Architect may reject any workmanship or materials, which are not in his opinion, up to the standard of the
approved samples.
F. Dayworks: No charges for day work will be allowed as such unless the Architect for the work shall expressly direct it to
be done as daywork or unless the work cannot from its character be reasonably valued by measurement. All vouchers for
daywork are to be delivered to the Architect within seven days following the week in which the work may have been
executed.
G. Re-Measurement: Allow for giving due notice to the Architect whenever works requiring inspection of any kind are
ready for covering up. If this is not done the Contractor will be required to remove any such work and cover up again entirely
at his own expense.`
H. Accounts: The Contractor will be required to produce invoices and receipted accounts for all items as Prime Cost or
Provisional Sums.
I. Areas of Operation: Allow for taking all reasonable precautions to prevent work people, including those employed by
sub-contractors, from trespassing on adjoining owner’s property or any part of the land or premises which are not at the time
connected with the works. If the Contractor wishes to erect scaffolding on, or otherwise make use of adjoining and or
properties, he shall allow for serving notices, obtaining permissions, and clearing away and making good any damage at his
own expense and paying any costs and charges in connection therewith.
Allow for confining to as small area as practicable, any operations which will affect the surface of the site and for protecting
the paved courtyard and parking area. Any damage by the Contractor and/or his sub-contractors is to be made good at his
own expense.
The Contractor’s attention is drawn to the fact that any closely adjoining sculpture, features, plants, shrubs and lawn must not
be damaged. A temporary covering of plywood or similar material shall be erected to protect shrubs etc. from mechanical
damage or mortar or other material deposit. All damage is to be made good at the Contractor’s expense.
J. Attendance: Allow for all attendance of one trade upon another, including cutting away for and making good after all
trades, and leave all perfect on completion.
K. Artists & Tradesmen: The Contractor shall permit the execution of the work not forming part of this contract by
Artists, Tradesmen or other engaged by the Employer. Every such person shall be deemed to be a person for whom the
Employer is responsible and not be a sub-contractor.
Allow for use by Artists and Tradesmen of the Contractor temporary roads, pavings and paths, standing scaffolding, standing
power operated hoistings plant, the provision of temporary lighting and water supplies, clearing away rubbish, provision of
space for the Artists and Tradesmen’s own offices, and for the storage of his plant and materials and the use of messrooms,
sanitary accommodation and welfare facilities.
L. Materials for the Works & Workmanship: Materials, goods and workmanship shall be to the satisfaction of the
Architect and shall be to the best of their respective kinds and shall apply where applicable to the current British Standards
and/or Codes of Practice. Preambles and description of materials, goods and workmanship given in any one section or trade
shall apply throughout the Specification/ Schedule. All setting out, levels, drawings and dimensions are to be checked by the
Contractor before and as work proceeds.
17 of 50
2.3
A. Noise Control: The amount of noise on the Works is to be kept to a minimum; the Contractor must note Section 60
of the Control of Pollution Act 1974 with reference to the control of noise, especially where the works are adjacent to
occupied property, ascertain what requirements or restrictions, if any, shall apply to the Works.
B. Provide All Plant, Tools, Scaffolding & Protection: Provide, maintain and install all necessary hoists, ladders,
scaffolding, staging tackle, tools and other plant (mechanical and otherwise) and allow for altering, adapting and maintaining
them as necessary for the proper execution of the works in accordance with current British Standards, Codes of Practice and
the requests of Health & Safety and all other applicable legislation.
a. Generally Where the building is insured by the Ecclesiastical Insurance Group, the scaffolding is to be fully enclosed by
minimum 18mm exterior grade plywood sheeting or steel sheeting hoarding to a minimum height of 4.8 metres, and, similarly
above any climbing points, on the building, cills offsets and the like. All plywood sheeting must be fixed to 75mm x 100mm
timbers. The timbers must be either clipped to the scaffolding by appropriate scaffold clips, or secured to a substantial stand-
alone timber frame complete with adequate internal bracing to prevent collapse if attacked. (note oriented strand board (OSB)
is not an acceptable form of hoarding).
b. All joints of the plywood or steel sheeting facing are to be tightly butted to prevent tools being used to prise them apart.
c. Fixing 100mm annular ring shank nails at 150mm centres are to be used to fix the plywood boards to the timber frame.
Tamper proof screws may be used as an alternative.
d. The bottom of the hoarding is to follow the contour of the ground leaving no gaps between the hoarding and the ground.
e. Where the hoarding abuts a building the plywood or steel sheeting is to cut to match closely the contours of the building
to prevent any gaps being formed.
f. Doors & access All lower level ladders including access ladders to any scaffolding are to be removed from the site or
secured & rendered unusable and inaccessible at the end of each days working.
g. Any doors let into the hoarding are to be of exterior grade solid wood type fitted in a purpose built frame. The door and
frame must be flush with the exterior face of the hoarding. Heavy duty 75mm x 100mm steel butt hinges are to be used to
hang the door, the hinge pin being burred over to prevent it being driven out. A minimum of 3 hinges to be fitted to any door.
h. A ‘Yale’ latch type lock is to be fitted to all doors. When the site is not attended doors must be secured by a heavy duty
locking bar, secured to the door and frame by bolts bolted through. The locking bar must conceal the bolt heads. A heavy
duty close shackled padlock conforming to at least BS EN 12320 security grade 4 and designed for external use will be used
to secure the locking bar.
i. Lighting The exterior of the hoarding is to have floodlights (500w) angled out and towards the ground at a height of
three metres from the ground and not more than four metres apart. These lights are to be switched on by ‘PIR’ detectors
during darkness.
j. The inside of the scaffold is to be adequately lit with floodlights angled inwards and up through the scaffold illuminating
its entire height. These lights must be switched by photo-electric cell for illumination at night only.
k. Intrude detection The scaffolding is to be protected by a scaffolding alarm system installed in accordance with the NSI
Code of Practice for the design, installation and maintenance of scaffolding alarm systems NCP 115.
l. The system is to be installed and maintained by a company on the official list of recognised firms of the NSI or SSAIB
inspectorate bodies and must also appear on the local police force list of compliant companies.
m. The system is to combine notification locally by an instantaneous audible device activation together with notification to a
permanently manned alarm receiving centre conforming to BS 5070 or BS EN 50518 via a minimum Grade 2 alarm
transmission system under BS EN 50136. The system must be designed to utilise combined PIR detectors and cameras to
detect unauthorised movement. Images from devices must be reviewed by the manned alarm receiving centre and action
taken if unlawful activity is identified.
n. A copy of the scaffolding alarm system design proposal is to be sent to Ecclesiastical for approval. The specification
must include confirmation by the alarm company that, either sub-contractors will not be used or specify the extent to which
sub-contractors will be used where appropriate.
18 of 50
2.4
A. Provide All Vehicles and Transport: Provide all necessary transport for labour, materials, plant etc. for the works.
B. Site Meetings: All for arranging site meetings at regular intervals as required by the Architect.
C. Protection, Lighting & Watchmen: The Contractor shall provide all requisite protection upon and adjacent to the site
as may be necessary for the public safety, including all lighting barriers, etc. and he shall protect the works whilst in progress
and he shall be held responsible for and must indemnity the Employer against all actions, claims, loss, damages or costs
brought, taken or incurred by any person or persons consequent upon negligence of the Contractor or his workmen, and also in
respect of all accidents and damages to persons, vehicles, etc. or for trespass during the performance of this Contract. The
building and contents are to be kept fully protected and secure at all times and particularly when the site is unattended.
D. Protection of the Works From the Weather: Allow for providing and maintaining all necessary protection and
coverings of the building, fittings, new and existing works to prevent injury by frost, wet, or other inclement weather and
removing and reinstating all damaged works which the Architect decides have not been adequately protected.
The Contractor’s attention is drawn to the fact that any existing structures must not be overloaded and materials must not be
stored thereon and any temporary storing or supports must be provided and maintained to protect existing structures.
Any damage to existing or new works and contents or surroundings arising from the works shall be made good by the
Contractor.
E. Site Practice: The playing of radios, consumption of food, smoking are not to be permitted within the site area, building
or on the roof. The site works are at times to be maintained in a tidy and clean state to the satisfaction of the Architect.
F. Casing up & Protection: Allow for casing up and protection of all new and existing works and fittings in all trades as
necessary during the execution and until completion of the works and reinstating as last described.
In the case of Ecclesiastical buildings where an organ is fitted, this is to be fully protected against dirt, impact and ingress of
water to the satisfaction of the Architect and Employer.
G. Water for the Works (see Scope of the Work): Where an adequate water supply for the works exists on the site, this
may be used with the Employer’s permission.
H. Temporary Lighting & Power (see Scope of the Work): Where an adequate lighting and power supply for the works
exists on the site, this may be used with the Employer’s permission with adequate counter charge agreement or as stated in
the schedule.
I. Temporary Accommodation: All necessary temporary accommodation for the storage of materials is to be provided by
the Contractor and located as agreed. All compounds, site cabins, plant and material storage are to be positioned to the
satisfaction of the Employer, Architect and Local Authority.
The Contractor must ensure that only small quantities of the materials are stored day by day.
The Contractor shall ensure that gas cylinders (calor, propane, or other gases) whether full or empty are, when not in use, to be
stored in a secure place constructed of non-combustible materials, well ventilated and away from sources of heat.
The Contractor must provide for all temporary sanitary accommodation and the cleaning of same.
J. National Insurance & Injury: Pay all contributions and expenses incurred in complying with the requirements of the
current Social Security Act and with the National Insurance (Industrial Injuries) Act Order (Employers Liability Insurance)
Redundancy Payments Acts.
In addition to be liable for and indemnifying the Employer against loss, liability, claim or proceedings as stated in the
conditions, the Contractor is also to insure against such risks. The Contractor will be responsible for ensuring that all sub-
contractors are similarly insured.
K. Maintenance of Roads: The Contractor shall ensure that roads and footpaths in the approach to the site are kept free of
mud and debris, and that damage, beyond fair wear and tear is caused to the public and private roads and footpaths by site
traffic. In the event of any damage being so caused or expenses being incurred, the Contractor is to make good or pay for the
reinstatements to the satisfaction of the Employer, Architect and Local Authority.
L. Clearing Away: Take down and clear all plant and temporary works, including sanitary convenience, mess rooms,
offices, sheds etc. otherwise described and make good. Remove all existing rubbish, (including that of sub-contractors),
surplus materials as they accumulate and at completion, clean floors, pavings and external surfaces, and leave the works clean
and tidy.
19 of 50
£ p
3. SCHEDULE OF WORK
3.1
GENERALLY
A. Preparation Provide and maintain all necessary plant, scaffolding, equipment, tools and
materials for the proper execution of the works in accordance with these
preliminaries, preambles and general specification and all current British
Standards, Codes of Practice and Legislation and to comply with all current
Health and Safety requirements.
B.
Protection Protect all areas of stonework, paths & shrubbery adjacent to the works from
damage during the works.
C. Where relevant arrange with Electricity Company to protect main cables and
remove on completion of works.
D. The Contractor is to report and make good any damage caused, without delay
and to the satisfaction of the Architect. Any new materials or fixings damaged
during the works are to be replaced by the Contractor.
E. Dust will be generated during the works; this must not be allowed to cause
nuisance or damage.
F. The contractor must examine the existing conditions on and adjacent to the
area of work and satisfy himself and include for any necessary making good;
and, to record the existing conditions with photographs before work
commences.
G. Area of work To the south side of the lych gate to the south east corner of the church yard,
adjacent to the small area of public parking.
H.
I.
Take out The shrubbery stumps in the area of work & clear.
Existing path kerbs where the head of the ramp is to connect.
J. Take down Carefully take down the stonework boundary wall to form the access to the
ramp.
K. Salvage the copings include the ‘curved’ section and, sufficient general
stonework for reuse in rebuilding & ramp kerbs.
L. Rebuild Reconstruct the wall and form the end pier to the opening, reusing reclaimed
stonework & coping to detail.
M. To be bedded & position in NHL 3.5 : 1 stone dust : 1 sand, brush finished
mortar. Store surplus stone for use in kerbs.
N. Excavate Into ground for new levels for the ramp & kerb edging footings all down to
firm bearing.
O. Clear surplus material.
P. Human remains There are no marked burials on the site, but disarticulated remains are possible.
If found are to be treated with respect, placed in black plastic bags and handed
to the employer for reburial.
Q. Electrics Engage NICEIC registered electrician to extend wiring from lychgate lamp to
new ‘brick’ lights; to be in black pvc sheathed micc cable, fittings & ‘routes as
noted on drawing. Installation to be in accordance with current NICEIC Regs.
& to comply with Church Regulations as published by C.B.C. access web
“ChurchCare”.
20 of 50
p
3.2
A. Examine Exposed south wall of the lych gate, report to Architect and take instruction.
B. Provisionally, include to clean off the stonework of earth staining and to
repoint below existing ground level.
C. Take up The small ‘gardened’ area and sufficient stone sets at the base of the ramp to
allow for and excavate for new footings.
D. Footings Following excavations, provide & lay concrete strip footings to the sides of the
ramp.
E. Kerb Take from store reclaimed stone from the boundary wall.
F. Bed & lay on-edge & haunch with concrete to form continuous kerb finish, to
be finished 100m above the ramp level.
G.
H.
Assess at tender & include for any make-up required.
End joints to be open 5mm gaps; cast pockets for handrail stanchions into
concrete 200mm deep.
I. Hardcore Consolidate the ground, provide & lay hardcore & sand blinding.
J. Concrete Provide & lay 75mm fibre-reinforced concrete, finish to levels noted & even
slope and with a cross-camber.
K. Feather in to the existing stone sets at the base and the existing sloping
tarmacadam path at the head of the ramp.
L. Resin Bound Gravel Prepare concrete, provide & lay 25mm thick course of suitable resin bound
gravel to a sample approved by the Architect, to be Cheshire Bound Stone Ltd.
(tel. 01625 318911) 10 years garanteed ‘heavy domestic trafficked’ Yorkstone
colour, or similar equal.
M. Handrails Provide & form in galvanised mild-steel to detail, to the full length of the ramp
and to either side of the existing lych gate steps.
N. Stanchions to the free standing sections of rail to be resin bedded into the
concrete foundation minimum 200mm.
O. Wall brackets to be secured to stonework with stainless steel screws into pvc
plugs; the open ends of handrails to be wrought as detailed.
P. Painting Prepare, and apply suitable primer, undercoat & satin black oil Dulux or
exactly similar to approval.
Q. Make good To the adjacent ground and prepare for new planting.
R. New shrubbery Include the provisional sum of £300 (three hundred pounds) for specialist to
provide & set shrubbery to the local areas adjacent to the ramp following
completion.
300 00
S. Contingency Include the sum of £500 (five hundred pounds) to be expended in part or whole
as directed by the Architect.
500 00
T. Clear All debris, equipment and materials and leave the area of works clean, tidy and
free of defect.
TOTAL TO SUMMARY
21 of 50
3.3
Photographs, Pott Shrigley, St. Christopher October 2019
view of lychgate looking into site
view of lychgate looking out of site
22 of 50
3.4
view adj. lychgate looking to south-west
general view of church from south-west
23 of 50
4.1
SPECIFICATION NOTES AS APPLICABLE
1.0 PRELIMINARY WORK AND DEMOLITIONS
DEMOLITIONS
Survey Before starting work, the Contractor is to carry out a thorough survey and examination of building or
structure affected by the work.
Drawings
Examine all available drawings of buildings or structures affected by the work.
Bench Marks
Report any bench marks and other survey information found on structure to be removed. Do not remove or destroy unless instructed.
Services
Locate and mark the position of services affected by the works and demolitions and notify the
appropriate authorities.
Disconnection of Services Before starting demolition work, arrange with the appropriate authority or company and allow for the
disconnection of services and removal of fittings and equipment.
Underground Voids
Before and during works, check for voids and report to Architect any underground chambers, vaults, walls, etc. discovered before or during the work.
Adjoining Property
Allow for compliance with the Party-Wall Act where applicable and to liaise with party wall
surveyors when demolishing structures against adjoining property leave adequate support and
protection at each stage and arrange for inspection by Architect. Proceed with subsequent stages of
demolition as instructed.
Support existing structure as necessary during cutting of new openings or replacement of structural
parts. Do not remove supports until new work is strong enough to support existing structure.
Do not disturb support foundations of adjoining property.
Overhead Wires
Prevent damage to overhead wires during demolition operations.
Partly Demolished Structures
Prevent access of unauthorised persons to partly demolished structures. Leave safe at close of each
day’s work.
24 of 50
4.1
Dangerous Openings
Illuminate and protect as necessary.
Overloading
Prevent debris from overloading any part of the structure.
Gas or Vapour & Dust
Reduce dust by periodically spraying demolition works with water.
Stored Materials
The items for re-fixing materials in the works describe such materials as “stored” and this description
shall be deemed to include selection, cleaning, removing from store in the appropriate location of the
works, fixing and supplying matching screws to replace any damaged or missing.
Removing
Prices shall include for clearing away of materials arising from the area of the works and leaving
clean on completion; and shall include for making good any damage sustained to fittings whilst
dismantling and re-fixing.
4.2 25 of 50
4.1
2.0 EXCAVATION AND EARTHWORK
Surface Excavation Excavation down to foundation levels of ground floor construction is hereafter classified as surface
excavation albeit that such levels may be totally below natural ground levels.
Natural Ground Level
Shall mean the average existing ground level after demolition of existing buildings.
Surface Level
Shall mean the ground level after vegetable soil or turn has been executed.
Reduced Level Shall mean the ground level after excavation to reduced level has been executed.
Removing trees, hedges and the like
The removal of trees, stumps and roots, hedges, bushes, shrubs, undergrowth and the like shall be
deemed to be included with the items for cutting down and grubbing up roots.
MATERIALS
Earth Filling Earth used as backfilling or to make up levels shall be the best selected, clean, dry excavated material,
free from rubbish or refuse.
Ashes
Shall be clean, sharp, foundry or boiler ashes containing not more than 20% dust and free from all
deleterious matter, flue dust or destructive ashes shall be not used.
Gravel
Shall comply with BS 882 for “All-in” aggregate.
Hardcore Beds and Filling
Shall consist of clean broken brick, concrete, stone, quarry waste, gravel or other approved hand material, having the following properties.
(a) It shall all pass a 75mm diameter ring, shall be roughly cubical in shape and contain sufficient
proportions of small gauge material to ensure that it can be readily consolidated by the methods
specified into a compact fill.
(b) It shall be incombustible, free from organic material and excessive dust and from sulphates
and other constituents which could have a deletrious effect on concrete.
4.3 26 of 50
4.1
(c) It shall be chemically and physically stable whether dry or wet, in particular, it shall not
contain clay or shale.
The hardcore shall be thoroughly compacted in layers not exceeding 150mm in consolidated thickness
by means of a smooth-wheeled roller weighing not less than 5 tonnes (or if vibratory having a weight
sufficient to provide the same compacting capacity) or by means of a power rammer where rolling is not practicable. The top of the bed or filling shall be blinded with finer material to the same
specification and rolled to a firm and even surface true to form.
Granular Material
Shall be 10-6mm pea shingle; the material shall not contain fine sand or similar material.
WORKMANSHIP
Nature of Ground
The Contractor shall satisfy himself as to the nature of the ground to be excavated, and no extra will
be allowed by reason of his failure to do so.
Prices for excavation shall include for clearing the site of vegetable matter, grubbing up roots and
disused drains and for sealing off drains, removing contaminated earth and filling in voids where
directed with hard, dry materials.
Method of Excavation
Prices shall include for whatever means of excavation may be necessary having regard to the nature of the work and to the requirements of the Local Authority.
Compacting the bottoms of excavation shall be carried out by means of a mechanical punner or other
approved method.
Excavations shall be left open for as short a period as practicable in the case of marl or other soil
where rapid deterioration of the surface is possible on exposure, excavation shall be taken only to
within 75mm above the required level; immediately before placing concrete the remainder shall be
excavated by hand and the bottom of the excavation cleaned of all loose spoil, wood or debris.
Excavation for external roads and pavings shall be taken only to within 75mm of the above the
required level; immediately before laying the surface finish the remainder shall be excavated carefully and without disturbing the ground below and cleared of all loose spoil, wood or debris.
Inspection
The Contractor shall give the Architect twenty-four hours notice in writing when the excavations will be ready for inspection : the bottom of every excavation will be inspected and the level taken; no
concrete is to be poured until the Architect or is representative and the Local Authority have approved
the bottom.
All backfilling or excavated material next to foundation, etc. shall be deposited in layers not
exceeding 200mm thick, each layer shall be well watered, if necessary, and well rammed by
mechanical means, the bull dozing of material into excavations will not be permitted.
All filling of excavated materials to make up levels shall be deposited in layers not exceeding 200mm
thick, each layer shall be well watered if necessary, and well rammed by mechanical means.
4.4 27 of 50
4.1
Hardcore
Filling shall be deposited in layers not exceeding 200mm thick; each layer shall be well watered and
rolled with a 5 tonne roller when practical or rammed by mechanical means when not.
Prices for hardcore filling shall include all necessary temporary retaining boards and for any
additional cost involved in filling around drains and manholes, service pipes, ducts, etc.
Filling
Prices for filling shall include for all necessary temporary retaining boards and for any additional cost
involved in filling around drains, service pipes, ducts etc.
Blinding
Shall be spread to fill all interstices and well rolled to provide a fine and even surface to receive the
surface covering.
Excess Excavation or Falls
Where excavations have been made deeper than shown on the working drawings and without
instruction from the Architect, these excavations shall be filled with plain concrete to the level as
shown on the working drawings; the Contractor shall bear the cost of any such excess excavation
together with the consequent filling.
Should a fall occur in any excavation the Contractor shall reinstate or repair same and, if necessary,
fill in any voids with plain concrete to the level or width as directed by the Architect. The Contractor shall bear to the cost of any such reinstatement or repairs together with the consequent filling.
Concrete used for filling shall be normal mix 1:10 all-in aggregate as described in Concrete work.
Damage to Excavations
Should the bottom of the excavations become damaged by weather or water, cut up by traffic,
softened or otherwise made unsuitable, such damaged portions shall be removed and the space made
up with suitable material as directed by the Architect at the Contractor’s expense; any naturally
occurring soft spots shall be similarly dealt with but with the remedial cost thereof needed to the
contract sums.
Disposal of Surplus Excavated Material
Prices for disposal of excavated materials, including vegetable soil for use on site shall include for all
double handling, wheeling and the formation of temporary spoil heaps.
Surplus excavated material described as ‘removing from site’ shall be carted away to a tip provided by the Contractor who shall pay all fees in connection therewith.
Disposal of Water
The site shall be kept free from general water by pumping or other means during the progress of the work and the Contractor shall ensure that all excavations, buildings, struts, sewers and other adjacent
works and property are not disturbed by such water.
4.5 28 of 50
4.1
Earthwork Support
If the Contractor elects to use special shoring or steel sheet piling as a means of earthwork support he
shall include for same in his prices.
Earthwork support to excavations has been described without distinguishing positions where
additional thrust may be encountered; prices accordingly shall include for any additional cost entailed in supporting such excavations with particular reference to excavations in the proximity of existing
building, public or private roadways etc.
Work in Cold Weather
The surface of the ground both before and after excavation shall be protected to prevent freezing by a
layer of straw or other insulation material or by steam lines laid under tarpaulines; frozen materials
shall not be used for filling.
Melting or defrosting shall be thoroughly carried out by means of flame throwers or steam heating
before concrete is poured and steps taken as described to prevent re-freezing of the ground beneath
newly placed concrete or brickwork.
4.6 29 of 50
4.1
3.0 CONCRETE WORK
Cement
The cement shall be from an approved source and shall comply in all respects with BS 12 1978
delivered in the original sealed bags of the manufacturer and stored in a proper manner to avoid
deterioration. High aluminium cement will not be permitted.
Fine Aggregate
Shall comply in all respects with BS 882 1973 and shall consist of well graded course sand, mainly
passing a 5mm test sieve as defined therein.
Course Aggregate
Shall comply in all respects with BS 882 1973 and shall consist of natural gravel, crushed gravel or
crushed stone, well graded from the nominal maximum sized referred to hereafter.
All-in Aggregate
Shall comply in all respects with BS 882 1973 and shall consist of aggregate containing a proportion
of material of all sizes as obtained from the pit or other source well graded from the nominal
maximum sizes referred to hereafter to 5mm.
Proportions
The nominal mixes of concrete referred to hereafter shall have the following quantities of aggregate
per 50kg cement and the course and all-in aggregate shall be of the nominal maximum sizes tabulated.
Nominal Mix Fine
Aggregate m3
Course
Aggregate m3
All-in
Aggregate m3
Nominal
Maximum size
mm
Mix
A 1:5:10 or
1:12 all-in
0.18 0.35
0.42
40
B 1:3:6 or
1:7 all-in
0.1 0.2
0.25
40
C 1:2:4 0.07 0.14 20
Mixing Concrete
Materials for concrete shall be measured in approved gauge boxes on a boarded platform. The
proportions referred to above are for dry aggregate and due allowance shall be made for the moisture content, to the satisfaction of the Architect.
The amount of mixing water shall be sufficient to give a good workable mix but in no case shall the
slump, as measured in accordance with BS 1881 Part 2 1970 exceed 50mm.
The mixing of lightweight concrete shall be as previously described but the aggregate and water shall
be mixed first and then the cement and any additional water shall be added to effect proper
consistency.
4.7 30 of 50
4.1
The mixing unless otherwise approved shall be carried out in an approved mechanical batch mixer.
Mixing shall continue until there is a uniform distribution of materials and the miss is uniform in
colour and consistency.
Ready Mixed Concrete
Ready mixed concrete complying in all respects with BS 1926 may be used with the written consent of the Engineer provided always that:
It conforms in all respects to the appropriate mix of concrete specified, where applicable, meets the
restrictions imposed for the control of concrete colour, and the necessary supporting evidence is submitted and approved. Delivery notes recording the information specified in Clause D13 of
BRMCA authorisation scheme and in addition the actual batched weights of cement and aggregates,
the water content, the times of adding the mixing water to the dry materials and the completion of
discharging the concrete, and in each case signed by a person in authority, shall be kept on site for
inspection by the Engineer.
Transporting and Placing
All concrete shall be transported and placed as rapidly as possible after mixing and in all cases within
30 minutes, by approved means, to prevent segregation and loss of ingredients.
Frost
Concreting shall not be done during frosty weather except with the written permission of the Architect, who shall state what precautions are to be taken. When there is risk of frost, concrete
newly placed shall be covered up and protected and similar precautions shall be taken in hot weather.
Construction Joints
Shall be arranged in approved positions before any new concrete is placed on old, all excess water,
laitance, etc. shall be removed from the surface of the joints. The surface shall then be well
roughened, cleaned and thoroughly wetted immediately prior to the next placing.
Concrete Blinding
Where specified shall be 50mm of concrete mix A.
Foundation Concrete
To all walls, piers etc. shall be concrete mix B to dimensions indicated on the drawings.
Ground Slab
Shall be concrete mix B to thickness and finishes indicated on the drawings.
Sundry Work
Hack concrete as required to form key for plastering etc. cut or leave mortices, holes and chases and
perform all other sundry labours required for the proper execution of the work.
4.8
31 of 50
4.1
4.0 SPECIFICATION FOR BRICKWORK, BLOCKWORK AND STONEWORK
MATERIALS
Bricks
Shall be good, hard, sound, square, well burnt bricks free from cracks, stones, flaws and other defects
with BS 3921 Part 2. The Architect may at any time request samples of bricks to be tested in accordance with BS 3921 Part 2.
The common bricks shall be 65mm approved sound local commons.
The common load bearing bricks shall comply with BS 3921 Part 2 Table 6. Class 3 or 4 as specified.
The clay facing bricks where to be selected second-hand are to be local bricks to match the existing
where appropriate and features of the building to the approval of the Architect.
The sand lime facing are to comply with BS 187 1978 Class 4. Mortar for bedding and pointing is to
be as scheduled and either as described below or ‘hydraulic lime mortar’ as described in ‘pointing’.
Cement
Is to be British Portland to comply with BS 12.
Sand
Shall be approved clean river or pit sand free from saline water or other impurities to conform to BS
1200 Table 1.
Lime
Is to be well burnt stone lime or hydrated lime obtained from an approved manufacturer and is to
comply with BS 890 Class 2.
Mortar
Is to be mixed on a proper boarded stage the ingredients measured in proper gauge boxes and used
fresh immediately after mixing; any mortar which has commenced to set is not to be re-used.
Plasticising agents may not be used with sand-lime mortar mixes.
Mortar mixes shall be as follows:
Clay facing brickwork 1:1:6 Lightweight concrete blockwork 1:1:6
Sand lime brickwork 1:½:4½
or as described in the schedule
Blockwork
The internal block walls and inner leaf of external walls are to be thermalite Turbo blocks to BS 6073
(2.8N/M3) in the thickness shown on the drawings, manufactured by Thermalite Ltd, Station House
Road, Coleshill, Birmingham, B46 1HP.
4.9 32 of 50
4.1
Stonework
Is to be bedded and pointed with hydraulic lime-sand mortar as described in “repointing”.
Damp Proof Courses
The Hyload pitch polymer damp proof courses shall be as manufactured by Ruberoid Building
Products Ltd, Stockingswater Lane, Brimsdown, Enfield, Middlesex EN3 7PP, laid in accordance with Appendix C of BS 743.
Prices for damp proof courses are to include for bedding and jointing in mortar and lapping.
The Bituthene 1000 damp proof membrane shall be as manufactured by Servicised Ltd, 2 Caxton Street, London SW1H OQS, fixed strictly in accordance with their instructions.
Lintols
Shall be as manufactured by Catnic Components Ltd or as scheduled.
Wall Tiles
Shall be grade 316 stainless steel as manufactured by Catnic Ltd or other approved manufacturer.
Holding down straps etc. are to galvanised steel as manufactured by Catnic Ltd or ditto.
Building
The solid brickwork shall be built in English bond, half-brick walls and half-brick skins of hollow
walls shall be built in stretcher bond. The brickwork and blockwork shall be carried up true and
perpendicular and regularly to an even height all round the building, no part is to be more than one scaffold high above another part whilst work is proceeding, the bricks shall be wetted before being
laid. Headers shall be whole bricks and bats will only be allowed when legitimately required for
bond. All joints are to be fully flushed up solid with mortar.
Frogged bricks must be laid frog uppermost.
The verticality of the walls is of the utmost importance and any load-bearing walls which are out of
plumb or are bowed in a storey height as much as 6mm in a half-brick wall or 13mm in one-brick wall
will be required to be pulled down and re-built.
The coursing of all load bearing brickwork and blockwork shall be constant and identical, whether in
facings or in commons or in blockwork and shall be truly horizontal.
Loadbearing walls are to be built full height to the level of the element of construction which they are
deemed to support. Leaving the wall down for the passage of shuttering or for any other purpose
with subsequent building and pinning with slates or other means will not be permitted.
No brickwork or blockwork shall be carried out when the temperature is at or above 30oC unless the
permission of the Architect has been obtained that the work should be continued with agreed
precautions being taken, to ensure a minimum temperature of 4oC in the work when laid and
thereafter to maintain the temperature in the work at above freezing point until the mortar has
hardened. The addition of anti-freeze compounds to the mortar will not be permitted.
All internal walls shall be left with key to receive plaster and the Contractor shall price accordingly,
no claims for hacking or raking out joints will be allowed.
4.10
33 of 50
4.1
Sample Panel
The Contractor is to include for building a sample brick panel approximately 1 metre square of facing
brickwork for the approval of the Architect. The selected sample shall remain for the purpose of
comparison.
Cleanliness
The facework is to be kept free from mortar splashings, droppings or other blemishes and left
perfectly clean upon completion.
Cavities
Cavities in hollow walls shall be formed with and including Catnic stainless steel brick to brick wall
ties 193mm long spaced four to a square metre with additional ties at angles and reveals at 300mm
centres.
The rates for hollow walls shall include for bending wall ties to suit where horizontal coursing of
facing bricks and blockwork does not coincide.
The cavity shall be kept clear of mortar droppings by means of battens drawn up as the work proceeds
every fourth brick being left loose at the base of the wall and the cavity cleaned out and the wall made
good on completion. Prices shall include for forming weep holes by means of dry vertical joints.
Arched Work
Construct arches where shown on the drawings in selected facings laid to headers in cement-lime mortar as before described pointed to match the surrounding work.
Copings
Finish tops of external brickwork walls with brick on edge to match facings to receive copings
described.
Other Trades and Building-in Joinery
Provide chases wherever required for pipes, conduits and the like.
Allow for or rake out joints for flashings etc. to a minimum depth of 50mm and point in cement-lime
mortar.
Bed plates in cement-lime mortar and include for holding down ties as described.
Bed door and window frames and point in cement-lime-mortar.
Level and prepare existing walls for building-in and properly cut, tooth and bond all new brickwork to
existing.
Secure door frames and window frames with stainless steel frame anchors as manufactured by Catnic
Ltd at 450mm centres.
4.11 34 of 50
4.1
17.0 PAINTING AND DECORATING
Materials
All paints etc. including priming and undercoats and finishing coats are, unless otherwise described,
to be obtained from manufacturers agreed in writing with the Architect and comply with all current
British Standards.
For steelwork, materials shall be obtained solely from Viternus surface coatings, Williams Casco,
Partington, Manchester M31 4BT, tel. 0161 775 3025 and shall be applied strictly in accordance with
the manufacturer’s instructions.
The Contractor shall afford Williams Casco every facility to enable them to carry out periodic spot
checks during UK shot blasting and priming and shall inform Williams Casco at least seven days
beforehand when work will be carried out. This service, however, does not absolve the Contractor of
his responsibility to carry out all works according to the specification.
All materials for painting shall be delivered in sound and sealed containers, clearly labelled by the
manufacturer and shall conform to the requirements of the latest British Standards specification.
Workmanship
All paints shall be used strictly in accordance with the instructions issued by the manufacturers
without addition or adulterations of any kind.
All paints etc. unless otherwise described, shall be applied by brush.
The finishing colours shall be selected and approved by the Architect and the Contractor shall allow
here for supplying large sample panels for the Architect’s approval.
Each succeeding coat of priming and undercoating shall be sufficiently different in colour as to be
readily distinguishable.
No coatings shall be applied to surfaces affected by wet, damp, foggy or frosty weather or other
unsuitable conditions or to any surface damp with moisture. If it is desired to proceed with painting
when the temperature is below 4oC the permission of the Architect must be obtained.
All coatings shall be allowed to dry thoroughly before succeeding coats are applied.
All new putties shall be treated with one coat of knotting before painting.
All surfaces shall be carefully rubbed down and shall be approved by the Architect after preparation
immediately before painting and after each priming or under coat immediately before the next is
applied.
Preparation for painting shall be as follows:
For plaster / concrete and fair faced brick and blockwork shall be to brush and clean down to remove
all loose paintwork, dust or salt deposits and stop all holes, cracks etc. Where making good ensure a level and true surface with adequate filling and smoothing out.
For copper surfaces, to wipe down surface with white spirit to remove grease and dirt etc. and lightly
etch surface with abrasive paper.
Untreated and shop primed steel surfaces. Scrape, wire brush and clean surfaces free from rust and
scale and wipe bare metal with white spirit.
4.12 35 of 50
4.1
• All surfaces to be cleaned to remove dirt, and any site contamination.
• Damaged areas to be thoroughly wire brushed back to bright metal taking care to avoid
burnishing of the steel. All rust to be removed.
• All loose paint to be scaped back to a firm edge and edges feathered back to provide a smooth
surface to accept the touch-up painting.
• Damaged areas to be made good with : Viternus High Build Zinc Phosphate Primer (fast set) ref:
20/98 to 100 microns D.F.T. (+)
• Galvanised or sheridised bolts to be degreased with solvent then apply one coat of Viternus
Special Etch Solution ref: 70/33 (consult technical data sheet). Then apply coatings as in + above.
• Black bolts to be degreased with solvent wire brushed to remove any rust then apply coatings as
in + above.
Workshop steelwork during manufacture:
• All surfaces to be blast cleaned to Swedish Standard SIS 05.59.00 Grade S.A. 2.5. Minimum
amplitude 50 microns, maximum 100 microns.
• Within 4 hours of blasting apply overall by spray one coat of Viternus 2 pack Epoxy Zinc
Phosphate Pre-Fab Primer ref: 180/5 to 25 microns D.F.T.
• All weld areas to be mechanically cleaned to remove weld slag, spatter and loose paint. Grease
and oils to be removed. Above areas to be touched up with the recommended primer to a
minimum dry film thickness of 25 microns.
• Apply overall by airless spray one coat of Viternus I-ugh Build Zinc Phosphate Primer (fast set)
ref: 20/98 to 75 microns D.F.T. N.B. Pre-Fab priming is optional. If blasting is carried out after Fabrication, the Pre-Fab Primer may be omitted. Total D.F.T. of the system thus far should be
100 microns.
In summary,
Works Coating D.F.T. in Microns
Preparation: Blast Clean to S.A.2.5.
Blast Priming: Viternus 2 pack Epoxy Pre-Fab
Primer: Primer ref: 180/5
Viternus High Build Zinc
Phosphate Primer ref: 20/98
(25)
(75)-100
100 (Total D.F.T. microns)
Wood Surfaces to be Painted Treat all knots with knotting and after applying the priming coat : stop all cracks and holes.
Wood Surfaces to receive Clear Finish or Stain Stop all open grain, cracks and holes.
4.13 36 of 50
4.1
Existing Surfaces
All existing surfaces must be thoroughly inspected, cleaned down and be free of grease dust or other
deposits.
Loose paintwork is to be removed and the surface levelled with a suitable filler to avoid any surface
distortions of the new work.
Existing painted surfaces are to be thoroughly rubbed down with suitable glass paper or abrasive to
ensure an adequate key for the new painting.
Generally
All painting shall be touched up and left perfect on completion.
The priming for woodwork and metalwork shall comply with BS 2521 and BS 2523.
All priming coats applied at works or prior to fixing shall be touched up and made good if damaged
by subsequent handling.
Knotting shall comply with BS 1336.
White spirit shall comply with BS 245.
Stopping for:
i. Plasterwork and concrete surfaces shall be a plaster based filler.
ii. Internal woodwork and plywood shall be putty complying with BS 544 and shall be tinted to
match the colour of the undercoat.
iii. External woodwork shall comply with BS 217 Type 2.
iv. Gold size complying with BS 311 and shall be tinted to match the colour of the undercoat.
Gold leaf work is to be the Best English gold leaf and applied in accordance with recommended
procedure and onto suitably prepared surfaces, size and primer.
4.14
37 of 50
Greenwood Joinery & Building Services
Mr David Garton New Hey Farm Macclesfield Road
Rainow SK10 5UU
Quotation date; 26th January 2020 DETAILS; St. Christopher, Easy Access Ramp.
Proposed new path construction including all materials to provide disabled access to the Churchyard (as detailed in Graham Holland Associates drawings 6.1, 6.2, 6.3 and photographs provided).
Sub Total £21,300.00. inc VAT Total price to include additional costs (as specified);
New shrubbery planting £300.00 inc VAT Contingency £500.00 inc VAT
Total; £22,100.00 inc VAT N.B Additional Costs may be incurred if any unforeseen obstacles are unearthed during excavations which require extra work, e.g. drains, services etc.
Payment Terms; Payment on completion unless otherwise arranged in advance. Notes; Please make cheques payable to Greenwood Services Address: Halith Cottage, Shrigley Road South, Higher Poynton, Cheshire SK12 1TF Tel; 07779 184831
38 of 50
cott hr-Igle,g, St. Christophr, -accEAs prop() salc) 3u1t.4 Imo) rtu nou 1.1719
147—
Std Fc
YttA) duct
loe rep.atrect r new cof rued etnd cop, inq
A, p
ram up 1: ---,e
Laurel
ft nish ea
'brick It
ramp 9 v.t.tc/
hal/butt c-vt bract -c
\ pi ci reicattnect SI'Dne eclauns cL c'Qbait tt) be used -for
build-up tt) side oc-raMTA ,
hav irc11I m.t.--urvlect ra ci-eps photh
ton nalE a o not- 5c t,-a
q.t.•rcelA iseR et
AOA,0 t‘115t,mr-L)
z--11 -1!
Stavit,h 100
ex 9 :;fr21 ork
r\ecoir e ci
I tvteofursu -ro so 01-1/1
UL.Ltro zro 5 4 .
_
2. GRAHAM HOLLAND ASSOCIATE
Architects & Historic Buildings Consultant:
Winnington Hall, 'Cheshire, CW8 4DU tel: 01606 624626. fax: 01006 674002 mobile: 07885 224256
Plas Draw, Ruthin, Denbighshire LL15 1RT tel: 01824 704709 fax: 01824 704912
email: [email protected].
Dut n El atAon rornp v,c-t(on P. A tobk,,iq north
H,I2Dilt- 14-11 reused.. curved cbp Iv) 9
Ion 675 SQctle I: n -kfl5, 10-bi2tritl sbuth
ect(on CxC 14.7atio LA) e.sb
rekur - n Si-ctincin 100 S 4 I at; X
exisf-im
SUZADY)
lbok.19 rust 39 of 50
iGuzzinin Walky: Horizontal Excellence
Product Details Lighting system for walkways designed for use with LED light sources to ensure high visual
comfort.
Wall installation.
Comprising an optical compartment (IP66 protection class) and wall base strip casing to be ordered separately.
Optical compartment in aluminium alloy with powder paint coating to ensure high resistance to atmospheric agents and UV rays. Plastic closure casing in the rear part of the optical compartment.
Complete with plastic cable gland and 0.5 m long outgoing cable
Tempered frosted sodium-calcium safety glass.
Luminaire without visible screws
With anti-vandalism system involving a key to open and access the rear wiring compartment (supplied in the packaging).
With remote 24Vdc power supply (rectangular 270x90 mm).
Protection against over-voltages (220 ÷ 240 versions): 2kV in Common Mode (CM), 1kV in Differential Mode (DM).
Ambient operating temperature: Ta -30°C +50°C for 24Vdc versions, Ta -20°C +50°C for 220-240Vac (On-Off) versions,
All external screws used are in A2 stainless steel.
40 of 50
p 0 L -Shrigle,q St L
r or
eie,Datun
UrA, la LID
arme, paung
gu
exc.). colt es
J ClCC
S avlc iur, in . hoi tea .1r) SVoing stop
(-S Van Cl1 On I vt lb COATI&
shit g2E-s
I
SS OirDiOSCAIS; LI IHI) 7021). Otkigro4
s2c.--r/din °Lk, Frivto_
5+P -41- GRAHAM HOLLAND ASSOCIATES Architects & Historic Buildings Consultants
Winnington Hall, 'Cheshire, CW8 4011 tel- 01606 624626. mobile: 07885 224256
Plas Draw, Ruthin, Denbighshire LL15 1RT tel: 01824 704709 _
email: [email protected]
ETs 1 Izo King SDutn —West
41 of 50
Pott-ShrIqe,g ,St. Christopher; Cash access proposals I nui ,(A duayto 21-05D oh 03 rtuteed Apri l 2,0
Gb rYnin SD WI
hale itinitinn
elcted. .
70 'lc 5 VAlAi battt-ploite O(n ckoc, secured. tr., s(72vIaLoork. t it-h ecrews
rarritCKEt dk , u:ctit fmno air) andis (61,2P.cetAfrect
ou-er Kenlos
Gin handed eiraue_l nt h t'D ramp
ealare pet 1.41-ou-ceetcret-e-
t int
Migh Kerb 51-oviee, l~eOoe ram -reclatwlea
tr
0-noteke, hivto01-e/tails scale C5
I6An ernil Wti LCL stez( cmiskpa i cativ‘bLaa,
aunt
SD WI cUirOet,1_ bp0
h an a Sitinenie2
-aft ZS MANI 5C1/
la V Ye- 6-ecloc,e Hinicizikesc, U&4-1'U?
1-ri Lc mon en d.
wte
DO
n/dobi2 sran en b 115 X
ot+ the bott- of-the rump
I DD nAM d iet
GRAHAM HOLLAND ASSOCIATES Architects & Historic Buildings Consultants Winnington Hall, Cheshire, CW8 4DU tel. 01606 624626. • mobile: 07885 224256
Plas Draw, Ruthin, Denbighshire LL15 1RT tel: 01824 704709
email: infogigrahamhollanblassociates.co.uk
read in ctInjoncttonkSi-h ding
0:-It/on Df ex E E frionDirait
119
nliChioVIS Set- int-0 la cane beco“) P
S'Or-5
hoe oF ratifin ,
sal /e5
st-erg
42 of 50
Pott Shrigley St Christopher – Path
Attachments are listed according to the numbering on the supporting documents list
Attachments in blue are included within the proposals section
Attachments in green are included within the consultation section
Attachments in black italics are superseded or duplicated and do not form part
of the application
Date Message
28/08/2019
To: Caroline Hilton
From: David
Gartons
We have been working with Graham Holland to develop a proposal to
provide a new pathway adjacent to the lych gate at Pott Shrigley
church to provide access for wheelchair users, people with
pushchairs/prams and anyone else who finds the steps difficult. We
are at the stage of having a very near final design and Statements of
Need and Significance, but still need to complete detailed
specifications and obtain tenders for the work before we can submit a
Faculty. I anticipate that we should be able to submit the Faculty
application in time for the November DAC meeting.
Please can you advise if it would be helpful to submit the current
information for the DAC to be able to see it and make any informal
comments? I note that I have missed the submission deadline for the
September meeting so this would be for the October meeting
28/08/2019
To: David Gartons
From: Caroline
Hilton
The DAC would be very happy to provide informal advice. Please can
you can send me the proposal details that you have – including any
design details currently available, the Statement of Need, Statement of
Significance, and photographs. I will put this proposal on the agenda
for the DAC meeting taking place on 18 October.
Another thing to think about is that, in addition to faculty permission,
local authority planning consent would be needed for the introduction
of a new pathway
16/09/2019
To: Caroline Hilton
From: David
Gartons
With attachments
Please find attached the documents and drawings regarding the
proposed new pathway. Please can you present these for discussion at
the October DAC meeting? We are aware of the need to also apply for
planning permission.
4) Drawing 4050.6.1 location of Graham Holland dated July 2019
Superseded Drawings 4050.6.2 and 4050.6.3 Easy access proposals
(layout) of Graham Holland dated July 2019
27/09/2019
To: David Gartons
From: Katy Purvis
We have received some feedback from the reviewing architect ahead
of the next DAC meeting with the following comments
The overall concept seems reasonable. For formal submission the DAC
would like the following:-
1. Clarification will be needed from Cheshire East Council on any
planning issues.
43 of 50
2. Although a gradient is indicated, some relative numerical levels
would be helpful on account of the complexity of layout.
3. Presumably a full specification will be provided in due course.
Please could you liaise with Graham over points 2 and 3, and let us
know if there is any progress on the planning application?
22/10/2019
To: David Gartons
From: Katy Purvis
DAC advice
I am writing to let you know that at its meeting of 18 October 2019, the
DAC considered the proposals for the new path and wishes to offer
the following informal advice:
a) The Committee considered that whilst the scheme was
workable it was not fully persuaded of the reasoning for the
proposed long path and it felt that there may be aesthetic
disadvantages with this option. It suggested that using the
existing route through the lychgate and taking out the steps
would be much less visible and possibly less costly (and the
local authority may be happier with this)
b) It presumes that a specification is to be provided
c) With regards to the proposals as they stand, it asks that the
numerical levels of the gradients be provided
d) It noted that Planning Permission would be required from the
local authority
10/01/2020
To: Carl Thorgaard
From: Peak District
National Park
Authority
Application Ref PP-08403920v1
Your Local Planning Authority, Peak District National Park Authority
has received your online Full planning permission application and will
now validate it within their normal work flow and timescales.
Application Details
Applicant: Mr David Garton,
Agent: Mr Carl Thorgaard, Graham Holland Associates
Application site address: St. Christopher's Church, Shrigley Road, Pott
Shrigley, Macclesfield,' SK10 5RT
Date of submission: 16:20 on 10 January 2020
If they need more information or have any queries they will contact
you directly.
23/01/2020
To: Katy Purvis:
From: David
Gartons
Thank you for the comments from the DAC, and many apologies for
the delay in replying. I have discussed the points raised with our
architect, Graham Holland, and our comments are:
1. We are concerned that lowering the paved slabs within the
lych gate would likely expose ‘raw’ substructure and
foundations such that substantial or total rebuilding would be
required. The sidewalls of the lych gate sit on the current
steps, so removing the steps would undermine the walls. We
are also concerned that leaving the gate as existing but
lowering the paved slabs would result in an out of proportion
opening.
44 of 50
2. A specification is now to hand and will be submitted with
faculty application.
3. The drawings have been revised to include the gradient values.
4. A planning application has now been submitted to Peak Park
via the Planning Portal.
We believe that the proposal as presented is reasonably discreet and
works well without undue intervention into the lychgate.
I will be making the faculty application in the next few days.
23/01/2020
To: David Gartons
From: Katy Purvis
Thank you for this response, please could you send the specification if
it’s available, and I can send the response and spec for review ahead
of your formal application?
23/01/2020
To: Katy Purvis:
From: David
Gartons
With attachments
Please find the specification attached, as requested. I have also
attached the revised drawing which shows the gradients.
5) Drawing 4050.6.2 Rev 2 Easy access proposals (layout) of Graham
Holland dated October 2019
6) Schedule of work and specification of Graham Holland dated
October 2019
05/02/2020
To: Katy Purvis
From: Graham
Holland
With attachment
I have received a copy and to respond to your email of the 3rd
February and attached review. I’m sorry that your reviewer finds the
drawings difficult – I don’t!
Spot levels have been added as previously requested – I attach an
extract of drawing 4.2 these highlighted.
A Planning Application with justification has been submitted to the
local Planning Authority – here Peak Park not Cheshire East
8) Drawing 4050.6.2 Rev 3 Easy access proposals (layout) of Graham
Holland dated November 2019
27/02/2020
To: David Gartons
From: Katy Purvis
DAC advice
I am writing to let you know that at its meeting of 24 February 2020,
the DAC considered the application for the path, and subject to any
modifications which may be required for the planning permission and
to the full details regarding the proposed wall
lights, resolved to recommend the scheme with the following proviso:
a) The works to be under the direction and subject to the
inspection of the Church Architect
This means we will be able to raise the DAC Notification of Advice and
public notices when we have had confirmation of the lights and any
changes due to planning.
27/04/2020
To: David Gartons
From: Katy Purvis
I was wondering if there was any update on the detail of the lights or
any modifications required by the planning authority for the path, as
this can be processed when those details are finalised
45 of 50
27/04/2020
To: Katy Purvis
From: David
Gartons
I have had a telephone message from Graham today saying that he
had been informed that planning permission has been granted. I will
liaise with Graham to get the details of any changes and make sure
that you receive an updated design that reflects the changes agreed.
Graham also said in his message that there is a condition requiring
archaeological survey before the work commences.
28/04/2020
To: David Gartons
From: Katy Purvis
Thanks David, I look forward to an update when you and Graham are
ready
29/04/2020
To: Katy Purvis
From: Graham
Holland
With attachments
Following receipt of planning permission – copy attached with the
updated drawings as ‘negotiated’ with the ‘Authority viz
Rectangular wall lights
Stanchions rather than brackets to the handrails
Dimpled stone threshold to the base of the ramp.
Does the Diocese Archaeological advisor have a comment on the
‘condition’ and advice on the brief?
I trust acceptable as a variation.
9) iGuzzinini Walky horizontal wall light specification
10) Drawing 4050.6.4 Lych gate access proposals of Graham Holland
dated April 2020
11) Drawing 4050.6.3 Easy access proposals (handrail details) of
Graham Holland dated April 2020
13) Planning permission decision notice of Peak District National Park
dated 17 April 2020
29/04/2020
To: David Gartons,
Graham Holland
From: Katy Purvis
I’ve heard back from the archaeology advisor as follows
“Thanks for your email. As we have discussed, this is in the
Peak Park and, as in other parts of the Diocese which extend
into other planning authorities, I defer to their planning
archaeologist. However, I think that I can say that the condition
is pretty standard from an archaeological point of view and
appropriate. If the parish feel that they need a formal brief
before seeking quotes from an archaeological contractor, the
thing to do would be to go to the Peak Park archaeologists and
ask them to prepare a brief. However, it may be that the
architect already has somebody on their books who they wish
to use. Whatever happens, they would need to prepare a
project design for submission to the Peak Park as part of the
discharge of conditions process. Hope this helps.”
30/04/2020
To: David Gartons,
Graham Holland
From: Katy Purvis
I’ve heard from the architect review, and he is content with the
amendments required by Peak District National Park. This can now be
processed under delegated powers by Caroline, although the notice
period will be delayed due to Coronovirus lockdown. We will let you
know if the policy on public notices changes in the near future.
46 of 50
PLANNING DECISION NOTICE Peak District National Park Authority
Tel: 01629 816200
E-mail: [email protected] Web: www.peakdistrict.gov.uk Aldern House. Baslow Road. Bakewell. Derbyshire. DE45 1AE
PEAK DISTRICT NATIONAL PARK
To: Mr David Garton C/o Graham Holland Associates
Winnington Hall Northwich CW8 4DU
P.10305
THIS NOTICE RELATES TO PLANNING CONTROL ONLY, ANY OTHER STATUTORY CONSENT MUST BE OBTAINED FROM THE APPROPRIATE AUTHORITY
TOWN & COUNTRY PLANNING ACTS & GENERAL DEVELOPMENT ORDER
In pursuance of the powers vested in the Peak District National Park Authority under the above Acts and Order, and with reference to your application for Full Planning Permission, details of which are as follows:
Office Code No. NP/CEC/0120/0028 Date received: 10 January 2020 Proposal: Easy access ramp Location: St Christopher's Church, Shrigley Road, Pott Shrigley
Parish:
THE DECISION
Pott Shrigley
NOTICE IS HEREBY GIVEN THAT PERMISSION FOR THE PROPOSED DEVELOPMENT in the manner described on the application and shown on the accompanying plans and drawings is
GRANTED subject to the following conditions:
1 The development hereby permitted shall be begun within 3 years from the date of this permission.
2 The development hereby permitted shall not be carried out otherwise than in complete accordance with the amended plans received by the Authority 8 April 2020 subject to the following conditions or modifications.
3 No development shall commence prior to:
Signed
(a) A Written Scheme of Investigation for a scheme of archaeological monitoring being submitted to and approved in writing by the National Park Authority, and until any pre-start element of the approved scheme has been completed to the written satisfaction of the National Park Authority. The scheme shall include an assessment of significance and research questions; and 1. The programme and methodology of site investigation and recording; 2. The programme for post investigation assessment; 3. Provision to be made for analysis of the site investigation and recording;
c3641,/\ YtelfAi
Attention is called to the notes at the end of this Decision Notice
Continued/.. .
Date 17th April 2020
Form TCP3
47 of 50
Page 2 NP/CEC/0120/0028
P10305
4. Provision to be made for publication and dissemination of the analysis and records of the site investigation; 5. Provision to be made for archive deposition of the analysis and records of the site investigation; 6. Nomination of a competent person or persons/organization to undertake the works set out within the Written Scheme of Investigation.
(b) No development shall take place other than in accordance with the archaeological Written Scheme of Investigation approved under condition (a).
(c) Within a period of 12 weeks from completion of the development, the archaeological site investigation and post investigation analysis and reporting shall have been completed in accordance with the programme set out in the Written Scheme of Investigation approved under condition (a) and the provision to be made for publication and dissemination of results and archive deposition shall have been secured.
4 The railings shall be secured on ground mounted stanchions
5 The railings shall be finished in satin black paint, and be permanently so maintained
6 The light shall be in accordance with the specifications received by the Authority 27 February, and shall be fixed within mortar joints, not to the stonemasonry.
Reasons for Conditions:
1 To comply with Sections 91, 92, and 93 of the Town and Country Planning Act 1990 (which requires the National Park Authority to reconsider the proposal afresh after a period of years) as amended by Section 51 of the Planning Compulsory Purchase Act 2004
2 For clarity and for the avoidance of doubt.
3 To ensure that any items of archaeological interest are recorded or recovered.
4 - 6 In the interests of the character and the appearance of the development.
Footnotes
The Authority's Officers have assessed the proposal against Development Plan policies and any other material considerations and have recommended amendments which overcome any concerns and which ensure that the development follows guidance in the National Planning Policy Framework.
Note: Section 38(6) of the Planning and Compulsory Purchase Act 2004 requires that proposals be determined in accordance with the development plan, unless material considerations indicate otherwise. Section 38(3) of the Act also provides that the development plan consists of saved Development Management policies and the adopted Core Strategy.
Core Strategy Policies include: GSP1, GSP2, GSP3, DS1, HC4, L1 & L3
Relevant Development Plan policies include: DMC3, DMC5, DMC7 & DMC8
48 of 50
STATEMENT OF APPLICANT'S RIGHTS ARISING FROM THE REFUSAL OF PLANNING PERMISSION OR FROM THE GRANT OF PERMISSION SUBJECT TO CONDITIONS
Please note, only the applicant possesses the right of appeal.
If you are aggrieved by the decision of your local planning authority to refuse permission for the proposed development or to grant it subject to conditions, then you can appeal to the Secretary of State under Section 78 of the Town and Country Planning Act 1990.
If you want appeal against your local planning authority's decision then you must do so within 6 months of the date of this notice.
Appeals can be made online at: https://www.qoy.uk/planninq-inspectorate. If you are unable to access the online appeal form, please contact the Planning Inspectorate to obtain a paper copy on telephone number: 0303 444 5000 or by email to enquiry pins.qsi.qoy.uk.
The Secretary of State can allow a longer period for giving notice of an appeal, but will not normally be prepared to use this power unless there are special circumstances which excuse the delay in giving notice of appeal.
The Secretary of State need not consider an appeal if it seems to the Secretary of State that the local planning authority could not have granted planning permission for the proposed development or could not have granted it without the conditions they imposed, having regard to the statutory requirements, to the provisions of any development order and to any directions given under a development order.
The Inspectorate will publish details of your appeal on their website. This may include a copy of the original planning application form and relevant supporting documents supplied to the local authority by you or your agent, together with the completed appeal form and information you submit to the Planning Inspectorate. If you supply personal information belonging to a third party please ensure you have their permission to do so. More detailed information about data protection and privacy matters is available in the Planning Inspectorate's Personal Information Charter.
Appeals Examined by Inquiry
If you intend to submit an appeal that you would like examined by inquiry then you must notify the local planning authority and Planning Inspectorate (inquirvappeals planninqinspectorate.gov.uk) at least 10 days before submitting the appeal. You will be required to complete the Notification of an intention to submit an appeal email template, which can be found under this link: Inquiry Guidance.
Purchase Notices
If either the local planning authority or the Secretary of State refuses permission to develop land or grants it subject to conditions, the owner may claim that he can neither put the land to a reasonably beneficial use in its existing state nor render the land capable of a reasonably beneficial use by the carrying out of any development which has been or would be permitted.
In these circumstances, the owner may serve a purchase notice on the Council (District Council, London Borough Council or Common Council of the City of London) or, where the land is situated in a National Park, the National Park Authority for that Park in whose area the land is situated. This notice will require the Council or Authority to purchase his interest in the land in accordance with the provisions of Part VI of the Town and Country Planning Act 1990.
49 of 50
POTT SHRIGLEY PAROCHIAL CHURCH COUNCIL Tuesday, 30th April 2019 at 7.45 pm
Present: Rev David Swales, Duncan Matheson (Chair), David Gem (DHG), David Garton (DGG), Peter Kennedy, Ros Johnson, Mary Currell, Sheila Garton, Sally Winstanley, Kath Matheson, Eileen Buffey, Chris Day, Mike Akerman, Ian Clarke, Pam Cooke, Anne Murphy, John Ryley, Kim Swales Apologies: Andy Phillips Prayers: David Swales Welcome: Duncan welcomed Kim Swales to her first PCC meeting as Deanery Synod representative. Disabled Ramp – DGG had circulated drawings after the last meeting. Ian Greenwood has looked at the option of lowering the slab inside the lychgate. There are a couple of problems with this - involving the need to establish ownership of the lychgate (built by the Parish Council by public subscription) and ownership of the land it stands on (possibly part of the Lowther estate.) A practical problem would be the need to expose whatever is under the slab, possibly leading to the structure becoming unstable. The excavation would also go below the level of the dressed stone walls which reach the level of the slab but not further. After discussion it was agreed that the proposal to build a separate entrance was the preferred option. DGG proposed that the PCC should progress the provision of disabled access by means of a sloping path in accordance with Graham Holland’s drawing no. 4054 dated February 2011. Seconded by Kath Matheson. Passed by unanimous vote.
50 of 50