powder actuated tools - t1204-3
TRANSCRIPT
-
7/25/2019 Powder Actuated Tools - T1204-3
1/26
Ready, Aim Fire!
-
7/25/2019 Powder Actuated Tools - T1204-3
2/26
Powder-actuated tools are fast
and dangerous.
-
7/25/2019 Powder Actuated Tools - T1204-3
3/26
They have the same hazardsas a firearm.
Gunpowder is used to fire afastener into concrete or
other material.
-
7/25/2019 Powder Actuated Tools - T1204-3
4/26
Approved protection gearmust be worn.
This could include:
Hardhat
Safety goggles
Gloves
Hearing protection
-
7/25/2019 Powder Actuated Tools - T1204-3
5/26
Before you use a powder-actuated tool
Get the training you need.
Know these safety guidelines:
-
7/25/2019 Powder Actuated Tools - T1204-3
6/26
Inspect and test the tool before eachshift
Use only correct fasteners
Dont load until youre ready to shoot
Never fire into chipped or splintered
material
Never fire into hardened or brittlematerial
-
7/25/2019 Powder Actuated Tools - T1204-3
7/26
Make sure thin or easily-penetrated
material is backed properly
Avoid use in a potentially-explosiveatmosphere
Know how to deal with a misfire
Keep fasteners, other metal objects
separate from powder load
Warn others when you are about to
use the tool
-
7/25/2019 Powder Actuated Tools - T1204-3
8/26
Whether you are building an
office tower or finishing your
basement, use these guns
safely!
-
7/25/2019 Powder Actuated Tools - T1204-3
9/26
Powder-Actuated ToolSafety Tips
Dont use in explosive or fammableatmosphere
Inspect tool beore use to ensure:
it is clean,that moving parts operate reelythe barrel is ree rom obstructions and has
the proper shield, guard, and attachments
Dont load the tool unless using immediatelyDont leave a loaded tool unattendedKeep hands clear o the barrel endNever point the tool at anyone
Store unloaded in a loced boxOSHA Office of Training and Education 9
-
7/25/2019 Powder Actuated Tools - T1204-3
10/26
Powder Actuated Tools Operates like loaded gun and should be
treated with the same respect andprecautions
Must be used only by those specially
trained Should never be used in explosive or
ammable atmosphere
!nspect " clean# moving parts# and barrelfree from obstructions
$ever pointed at anybody
%ands clear of barrel end
7/4/16
-
7/25/2019 Powder Actuated Tools - T1204-3
11/26
$ot be loaded unless usedimmediately
%ands clear of barrel end
!f mis&red wait '( seconds &re again "if not &red wait another '( secondsand carefully remove load then put inwater
Must wear eye and face protection!f tool defect tag and take out ofservice
7/4/16
Powder Actuated Tools
-
7/25/2019 Powder Actuated Tools - T1204-3
12/26
POWDER ACTUATED
TOOLS
1910.243(d)(1)
Meet ANSI A10.3 1970PPE
Eye ProtectionHead and face depending on
conditions
-
7/25/2019 Powder Actuated Tools - T1204-3
13/26
Powder Actuated Tools
(cont.)1910.243 (d)(2)Firing Mechanism must prevent the tool
from firing: uring loading
!hile preparing to fire
"f dropped
-
7/25/2019 Powder Actuated Tools - T1204-3
14/26
POWDER ACTUATED
TOOLS (CONT.)1910.243(d)(3)
Fasteners used in
tool specificallydesigned for that
tool
Designed for the
material that isbeing driven into
Concrete
Concrete/wood
wood
Specific size = Specific operation
-
7/25/2019 Powder Actuated Tools - T1204-3
15/26
15
Charges used in
powder actuated tools
Right size charge with right size fastener
-
7/25/2019 Powder Actuated Tools - T1204-3
16/26
Powder Actuated Tools (cont.)
1910.243(d)(4)Tools must be inspected before useDefective tools taken out of service
immediatelyTools not loaded until ust before intended
firin!
LOADED OR EMPTY TOOLS
ARE NEVER TO BE POINTEDAT ANYONE!
-
7/25/2019 Powder Actuated Tools - T1204-3
17/26
POWDER ACTUATED
TOOLS (CONT.)Fasteners not driven into:
Very hard or brittle materialsCast ironGlazed tileSurface-hardened steelGlass block
Live rockFace brick
Hollow tile
-
7/25/2019 Powder Actuated Tools - T1204-3
18/26
POWDER ACTUATED
TOOLS
Avoid driving into
easily penetrated
materialUnless backed
Do not use tools in
explosive or flammableatmosphere
-
7/25/2019 Powder Actuated Tools - T1204-3
19/26
PO)*+, AT.AT+*
TOO/S 0O$T12 Operators must be trained in
the operation of this tool
Manufacturer3s training
-
7/25/2019 Powder Actuated Tools - T1204-3
20/26
TOOLS
General Safety Precautions:
Inspection
Firing
Misfires
Defects
-
7/25/2019 Powder Actuated Tools - T1204-3
21/26
Pow der Actuated Tools
Inspection:
Its clean!ll parts operate
reely"he barrel is ree rom
obstructions
-
7/25/2019 Powder Actuated Tools - T1204-3
22/26
TOOLS
Firing
Keep hands clear of the
barrel
5 pounds of force against
working material
-
7/25/2019 Powder Actuated Tools - T1204-3
23/26
Powder Actuated Tools
Misfires!ait 30 seconds
#r$ firing again!ait another 30 sec.
%emove the cartridge&lace in 'ater
-
7/25/2019 Powder Actuated Tools - T1204-3
24/26
Deects
""ag #do not operate$"%emove rom service
Powder Actuated Tools
-
7/25/2019 Powder Actuated Tools - T1204-3
25/26
45ATA/ 5AT6
&mployee illed 'hen struc in head by a nail (red
rom a po'der actuated tool) "ool operator 'asattempting to anchor a ply'ood orm in preparation orpouring a concrete 'all)
-
7/25/2019 Powder Actuated Tools - T1204-3
26/26
45ATA/ 5AT6&mployees perorming remodeling operations building a 'all)
*perator 'as attempting to anchor ply'ood to a +$x $ stud) "henail penetrated the stud and struc the victim) *ne 'orer illed'hen struc by a nail rom a po'der-actuated tool)