power electronics
DESCRIPTION
بسم الله الرحمن الرحيم. The Islamic University of Gaza Faculty of Engineering Electrical Engineering Department. POWER ELECTRONICS. EELE 5450 — spring 2011. Instructor: Eng.Moayed N. EL Mobaied. Lecture 1. Syllabus. Instructor: Moayed N. Almobaied, Msc. - PowerPoint PPT PresentationTRANSCRIPT
POWER ELECTRONICS
Instructor: Eng.Moayed N. EL Mobaied
The Islamic University of GazaFaculty of EngineeringElectrical Engineering Department
الرحمن الله بسمالرحيم
EELE 5450 — spring 2011
Lecture 1
Syllabus
Instructor: Moayed N. Almobaied, Msc.Room: B229Telephone: 2875E-mail: [email protected]: http://www.iugaza.edu.ps/emp/engmoayed
Assistant: Eng.Mansour RamlawiRoom: Laboratory
Syllabus
Course description
Power Electronics is power conversion and control from one form of power (energy) source to a desired form by using power semiconductor devices wherein these devices operate as switches. This course provides a basic knowledge of power Electronics device characteristics and circuits for the control and conversion of electrical power with high efficiency .
________________________________________________________________________
Syllabus
Course description
These converters can change and regulate the voltage, current, or power; dc-dc converters, ac-dc uncontrolled and phase controlled rectifier circuits, dc-ac inverters, and ac-ac cycloconverters. Applications include electronic Switching power supplies, motors, heaters system, and renewable energy systems. Analysis, design, and operation of power electronic circuits will be considered by simulation software.
________________________________________________________________________
Syllabus
Prerequisite
Electric circuits II (EELE 2311)
electronis1
Syllabus
Textbook
Primary Text: (Hard copy) Power Electronics & Controls. Samir K. Datta, Reston Publishing Company, Inc. 1985.Secondary Text: (Soft Copy) Power Electronics, Circuits, Devices, and applications. Second edition, M. H. Rashid, Prentice-Hall International 1993.Third Text: (Soft Copy) Introduction to Power Electronics Denis Fewson 1998
Syllabus
ReferencesPower Electronics for Technology, Ashfaq Ahmed, Preintice Hall 1999
Power Electronics, converters, applications, and design, N. Mohan, T. Undeland & W. Robbins, John Wiley &Sons, Inc. 1989.
Power Electronic Converters, AC/DC Conversion, Guy Sequier, McGraw-Hill, Inc. 1986.
Introduction to Modern Power Electronics, Andrzej Trzynadlowski, John Wiley &Sons,1998.
Syllabus
SoftwarePSIM: Is a simulation software designed for power electronics, motor control.Website: http://www.powersimtech.com/
Caspoc 2005: Is a simulation software used for Power Electronics and Electrical DrivesWebsite: http://www.simulation-research.com/sr/sr.php
Syllabus
Office Hours
Sat, Mon,wed 9:00-10:00 , 11:00—12:00,
Sun, Tue 11:00—12:00
Syllabus
Grading
Midterm exam ……… …........20 %Homework ……………..……10 %Quizzes ……………………...10 %Project ……………………....10 % Lab…………………………...20 %Final exam …………….…….30 %
Syllabus
Grading PolicyRegular attendance of this class is necessary to receive a
passing grade.
Weekly problem sets will be typically assigned and will be due one week later before the start of lecture.
Cellular phones should be off or on silent ring during class in order to keep classroom distractions at a minimum.
Cheating will not be tolerated and will be dealt with decisively.
Syllabus
Outline
Syllabus
Outline
Syllabus
Outline
Introduction
Introduction
Introduction
Introduction
(Used to charge batteries)
Rectifier
Vpwm (0-3.5V)
PWM mod. and MOSFET
driver
DC-DC conv.
Vout (0-120V)
Vset Vout
(scaled down to about 1.3V)
PI controller
PWM mod. and MOSFET
driver
DC-DC conv.
error
+ –
Open Loop, DC-DC Converter Process
DC-DC Converter Process with Closed-Loop PI Controller
Hold to 90VVpwm
PI Controller for DC-DC Boost Converter Output Voltage
Introduction
Introduction
End of Lecture **** Eng.moayed