power factor correction and filtering : lv offer give oxygen to your electrical network
Post on 19-Dec-2015
217 views
TRANSCRIPT
CEF - Marketing – 2007 – R.Fontanes 2
VARPLUS² : A fully modular offer with only one size for installation and
connection Maximum power per unit : 20 kvar at 50 Hz Installation in all positions Possibility of wiring connection at 360° 50 Hz or 60 Hz
Additional options :
IP 20/42 protection kit 2 bus bars set connection between capacitors
VARPLUS² : the range
Give Oxygen to your electrical network
CEF - Marketing – 2007 – R.Fontanes 3
Assembly of capacitors
VARPLUS² : the range
Give Liberty to your installation
Connection with bus bars kit or you can build your
own bus bars if you prefer
Additional IP 20/42 protection kit
CEF - Marketing – 2007 – R.Fontanes 4
VARPLUS² : the range
Give the right specifications
You can always use a capacitor with an upper voltage than your application if you want to.
50 Hz
230V
400/415V
525V
690V
240V
415V
480V
550V
690V
NetworkRated voltage of
the Varplus²
60 Hz
230V
400/415V
525V
690V
240V
415V
480V
550V
690V
CEF - Marketing – 2007 – R.Fontanes 5
VARPLUS² : the range
Give the right specifications
CLASSIC
Components :
Varplus² capacitors rated at
415V
COMFORT
Components :
Varplus² capacitors rated at 480V
HARMONY
Components :
Varplus² capacitors rated at 480V
+ Detuned reactors (135Hz, 190Hz or
215Hz)
Example : for a 400V-50Hz network
Slightly polluted network
Gh/Sn 15%
Polluted network
15%< Gh/Sn 25%
Highly polluted network
25%< Gh/Sn 50%
CEF - Marketing – 2007 – R.Fontanes 6
Varplus M1 Varplus²
(*) with cable connection
2 Varplus M1 Varplus²
(*) with cable connection
VARPLUS² : differences with Varplus M
Give Oxygen to your electrical network
Varplus Varplus² DifferenceHeight (mm) 210 219 + 9Width (mm) 218 220 + 2Depth (mm) (*) 211,5 114,7 -96,8
20 kvar
Varplus Varplus² DifferenceHeight (mm) 210 219 + 9Width (mm) 218 220 + 2Depth (mm) (*) 116 114,7 -1,3
5 à 15 kvar
CEF - Marketing – 2007 – R.Fontanes 7
Varplus M4 Varplus² + bus bar kit (option)
(*) with cable connection
Varplus M4 Varplus² + bus bar kit (option)
(*) with cable connection
VARPLUS² : differences with Varplus M
Give Oxygen to your electrical network
Varplus Varplus² DifferenceHeight (mm) 210 219 + 9Width (mm) 218 220 + 2Depth (mm) (*) 350 308,7 -41,3
50 kvar
Varplus Varplus² DifferenceHeight (mm) 210 219 + 9Width (mm) 218 220 + 2Depth (mm) (*) 350 308,7 -41,3
60 kvar
CEF - Marketing – 2007 – R.Fontanes 8
VARPLUS² : Give compliance with standards
IEC compliance IEC 60831 - 1 IEC 60831 - 2
UL compliance UL 810
CSA compliance CSA 22-2 N°190
CEF - Marketing – 2007 – R.Fontanes 9
Very large choice of positions to install the new VARPLUS² capacitor
VARPLUS² : the benefits
Give liberty to Panel Builders
CEF - Marketing – 2007 – R.Fontanes 10
No limit for the assembly of capacitors example with 120 kvar:
VARPLUS² : the benefits
Give liberty to Panel Builders
There are 3 conditions to respect :
Adapted bus bar section is expected to connect the capacitor assemblies shown beside
Minimum space of 25 mm is expected between 2 groups of capacitors (see the figure beside)
According to “Ventilation” chapter, specific precautions must be taken in order to not exceed temperature category : class D inside the cubicle
CEF - Marketing – 2007 – R.Fontanes 11
With VARPLUS², no earth connection needed
Fixation holes allow to have an easy and firm fixation with 2 M6 Screws :
Connection on the top of the capacitor : very easy to access
Fixation holes
VARPLUS² : the benefits
Give simplicity to Panel Builders
CEF - Marketing – 2007 – R.Fontanes 12
Assembly of several capacitors is fast and easy :
Wiring connection at 360°, and on the top of the capacitor (easy to access) :
VARPLUS² : the benefits
Give simplicity to Panel Builders
CEF - Marketing – 2007 – R.Fontanes 13
The fully modularity of the new VARPLUS² will give you a lot of flexibility in your stock management.
VARPLUS² : the benefits
Give liberty to Distributors
1 unique sizeVARPLUS M
VARPLUS²
CEF - Marketing – 2007 – R.Fontanes 14
VARPLUS², thanks to the assembly game, will allow you to cover all the power ratings you could need, depending on the voltage, frequency and harmonic pollution level of the network.
The fully modularity of the new capacitors will give high flexibility for stock management, example :
With less references you can cover all your needs
Power rating Varplus M references Varplus² references15 kvar B E20 kvar 2 * A (10kvar) F30 kvar 2 * B 2 * E40 kvar 2 * B + A 2 * F50 kvar C 2 * E + F60 kvar D 3 * FTOTAL 4 references 2 references
VARPLUS² : the benefits
Give liberty to Distributors
CEF - Marketing – 2007 – R.Fontanes 15
VARPLUS² : the benefits
Give peace of mind to End Users
The life duration of VARPLUS² is 15 years (130 000 hours).
Discharge resistor is already inside the capacitor : Resistor reduces voltage to less than 50V in 1 minute it can be used in an automatic power factor
correction bank without any additional discharge devices.
CEF - Marketing – 2007 – R.Fontanes 16
VARPLUS² : the benefits
Give peace of mind to End Users
A new production line especially for VARPLUS² : fully automated line, no risks of human errors
Robots for a high quality : An automatic control
at each step of production :
CEF - Marketing – 2007 – R.Fontanes 17
VARPLUS² : the benefits
Give safety to End Users
The mechanical resistance of the envelop has been multiplied by 2 compare to VARPLUS M.
High withstand to the fire => self extinguishing (V0 plastic to fulfil the UL compliance)
A High Quality protection system :
VARPLUS² is the one capacitor to use this technology to prevent 100% of the eventual defaults
internal fuse
terminals
coil
gas release channel
overpressure below
plastic case
resin
metalic disk
CEF - Marketing – 2007 – R.Fontanes 18
VARPLUS² : protection system
Give safety to End Users
� Against internal defaults (with a low current), thanks to the overpressure system
� Against external defaults (with high current), thanks to the HRC fuse
Dielectric losses its self healing propertiesGas pressure increases slightly and reaches the below.The below riseThe metallic disc short circuits the terminals across the fuse.The faulty capacitor is out of service.
The fuse protects against high current faults > I fuse
It operates for high current short time faults
CEF - Marketing – 2007 – R.Fontanes 19
The consumed energy has been decreased by 10% compare to VARPLUS M: VARPLUS² total losses < 0,5 Watt/kvar (discharge resistor included).
VARPLUS² is ROHS (Restriction Of Hazardous Substances) compliant. It means that VARPLUS² doesn’t contain any substances with concentrations exceeding the limits fixed by the ROHS Organism.
Involvement to the environment (ISO 14001) :
VARPLUS² is a dry technology : free of liquids.
VARPLUS² is environmentally friendly.
VARPLUS² Give involvement to the environment
CEF - Marketing – 2007 – R.Fontanes 20
VARPLUS² : accessories
Give a fully compatibility with VARPLUS Foot print for fixing is the same
Extension kit :
A kit to extend your installation with new VARPLUS² beside VARPLUS M capacitors is available.
CEF - Marketing – 2007 – R.Fontanes 21
Why the module : how does it work, what is the interest ?
Time saving and suppliers management much easier
Electrical tests to do in order to check all the connections
Time saving and easier to install : no need of an engineering department
All the Varpact modules have been tested inside Schneider manufacturing plant.
Time saving and more safe
Loose components Modules Modules
Advantages
VARPACT :Give Oxygen to your electrical network
Panel builderCapacitors
supplier
Contactors supplier
Protection supplierWiring supplier
Assemblyof components in the cubicle + study of the engineering department to use the right component.
Installation of VARPACT inside the cubicle
Panel builder VARPACT
CEF - Marketing – 2007 – R.Fontanes 22
VARPACT : the range
Give Oxygen to your electrical network
VARPACT : A pre-wired assembly, ready to be installed in the bank. Capacitors, commutation function, protection function are
already incorporated inside VARPACT It will allow you to build your capacitors bank in a very short
time. Maximum power for 1 module : 120 kvar at 50 Hz Tested at 100% inside Schneider plant
With or without bus bars : you have the choice.
CEF - Marketing – 2007 – R.Fontanes 23
VARPACT options : Circuit breaker option* for Classic and
Comfort range (not installed) :
Connection module :
Fastening crosspieces : Extensions pieces for cubicle (W=650,700,800 mm) :
VARPACT : the range
Give Oxygen to your electrical network
* The circuit breaker is always installed on the Varpact Harmony modules (to protect the Detuned reactor)
CEF - Marketing – 2007 – R.Fontanes 24
VARPACT Classic and Comfort :
VARPACT : the range
Give Oxygen to your electrical network
CEF - Marketing – 2007 – R.Fontanes 25
VARPACT Harmony :
VARPACT : the range
Give Oxygen to your electrical network
CEF - Marketing – 2007 – R.Fontanes 26
VARPACT : the range
Give the right specifications
Varpact Classic
• Simple or double steps
• From 12,5 to 120 kvar
• Inside : Varplus² rated at 415V
400V-50Hz networks
Slightly polluted network
Gh/Sn 15%
Polluted network
15%< Gh/Sn 25%
Highly polluted network
25%< Gh/Sn 50%
Varpact Comfort
• Simple or double steps
• From 15 to 90 kvar
• Inside : Varplus² rated at 480V
Varpact Harmony
• Simple or double steps
• From 12,5 to 50 kvar
• Inside : Varplus² rated at 480V + Detuned Reactor (135, 190 or 215 Hz)
In any case, it is recommended to make measurements at site in order to validate the final solution
CEF - Marketing – 2007 – R.Fontanes 27
VARPACT : installation
Give the right specifications VARPACT can be installed in all the following type of banks :
Prisma, Prisma Plus Universal
Horizontal mounting in functional or universal bank, depth D = 400 or 500 mm :
in cubicle (width W=600 mm), using fastening crosspieces in cubicle (width W=650, 700, 800 mm), using fastening
crosspieces and extension pieces
Vertical fastening every 300 mm (5 modules maximum) directly to cubicles uprights using sliding crosspieces or to intermediate upright support.
Control circuit power supply : 230V, 50 Hz
CEF - Marketing – 2007 – R.Fontanes 28
Installation of modules in the cubicle : Varpact with bus
bars :
Varpact without bus bars :
VARPACT : installation
Give the right specifications
CEF - Marketing – 2007 – R.Fontanes 29
International standards IEC IEC 60439 - 1 IEC 61921
European standards EN 60439 - 1
VARPACT Give compliance with standards
CEF - Marketing – 2007 – R.Fontanes 30
VARPACT modules allow to assemble a power factor correction cubicle quickly and easily :
Connection points are decreased
Bus bars option --> Easier installation (connection)
Logistic : 1 unique product to order instead of many products (capacitors, wires, contactors, protection…)
You don ’t need to have an engineering department to calculate the right components to use (wires size…)
Fastening crosspieces to install VARPACT in the cubicle
VARPACT is tested at 100% inside the manufacturing plant
VARPACT : benefits
Give simplicity to the Panel Builders
CEF - Marketing – 2007 – R.Fontanes 31
VARPACT : benefits
Give peace of mind to End Users
Life duration of VARPACT is 15 years (130 000 hours)
Safety of the operator during the maintenance operation thanks to the internal discharge resistor.
Protection against direct contacts during the maintenance thanks to the protection plate.
Decrease of hot points on the module, and decrease of the temperature inside cubicles compare to P400 modules.
Losses reduction = less overheating = more power inside 1 cubicle : 600 kvar / column for the Classic range (450 kvar in the past) 450 kvar / column for the Comfort range (405 kvar in the past) 250 kvar / column for the Harmony range (like in the past)
CEF - Marketing – 2007 – R.Fontanes 32
Retrofit kits exist. It allows to replace former modules by VARPACT in the following case :
Retrofit kit to replace a P400 module by a VARPACT module inside a Prisma or Prisma Plus cubicle
Retrofit kit to replace a P400 SAH module by a VARPACT module inside a Prisma or Prisma Plus cubicle
Retrofit kit to replace a P400 module by a VARPACT module inside a Rectimat2
VARPACT : accessories Give a fully compatibility with P400 modules
CEF - Marketing – 2007 – R.Fontanes 33
VARPLUS² and VARPACT will give to your electrical installation, its maximum energy efficiency :
> To erase expense on reactive power
> Higher transmission capacities for effective power
> Environment involvement thanks to a lower electrical consumption
> Improvement of power quality
> Reducing the operating costs
The installation of VARPLUS² or VARPACT capacitors means :
> a static system, don’t need maintenance
> Life duration of 15 years
> Fast Return on Investment (between 1 and 3 years)
New Power Factor Correction offer Give Oxygen to your electrical network