power generation and petroleum industries brochure …msis.org/flash/power_generation.pdf ·...

Morris Sallick Industrial Supplies, Inc.PO

WER

GEN

ERAT

ION

PO

WER

GEN

ERAT

ION

Power Generation andPetroleum IndustriesBrochure

Power Generation andPetroleum IndustriesBrochure

Morris Sallick Industrial Supplies, Inc. Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering


BOILER BASED SYSTEMS

Biomass Fuels Qualifications

Bagasse

Rice Husks

Barley Needles

Wheat Chaff

Oat Hulls

Our Qualifications are based on successful experience designing, supplying and installing unique systems for the combustion of difficult Biomass and Fossil fuels. Many of these fuels are high in soluble alkalis and other problematic constituents. Our successful experience dealing with these various fuels provides us with an unrivaled understanding and knowledge from which we develop new systems. A partial listing of the fuels with which we have proven successful experience includes:

Sludge

Malt Sprouts

Switch Grass

Wood Chips

Bark

NRP

Coal

Oil

Natural Gas

Distillation Residues

Coconut Shells

Chicken Litter

Municipal Refuse

TDF

Heavy Hydrocarbon

The McBurney Corporation is an engineering and Construction Company located in metropolitan Atlanta, Georgia, USA. We have been in business since 1911. Our firm specializes in Biomass fuelled steam and power systems for the Cogeneration, Utility, Cane Sugar, Forest Products, and other manufacturing Industries. While McBurney is a full service organization with engineering, project management, construction, main-tenance and repair services; McBurney works with its clients and provides those services which best complement the steam and power needs of that client for a particular project. In addition to being an Engineer, Procure, Construct (EPC) firm, we also perform Engineering Studies, Feasibility Studies and Efficiency Studies. Many of these studies later result in full scope Engineer, Procure, and Construct contracts forour clients.


FOSSILFossil Power Systems Inc. (Fossil) is a Canadian company that has been supplying system hardware/software and services to international customers for more than 25 years. By providing exceptional expertise and technical knowledge Fossil has become a trusted world class leader in the supply of control solutions and instrumentation for electrical utilities, pulp and paper processing plants,petro-chemical facilities, agricultural research facilities and food processing plants.

AQUARIAN SINGLE PROBE

ALARM MODULE

AQUARIAN 1000Plus

AQUARIAN 3000Classic

AQUARIAN 3000Mini

AQUARIAN 3000Visual

RETROFIT CLARK RELIANCE

PROBES

VALVES

AQUARIAN 3000 VISUAL

CCTC CAMERA


Conamara Engineering

Coal / Coke feeders.

--


Expansion joints.

High efficiency burners to burn one, two or three fuels at a time.

PREVENTION OF BOILER FOULING IS BETTER THAN CORRECTIONAgglomeration coats convective tubes and boiler surfaces causing: • Increased heat rate (lower efficiency) • Lowered steam temperature • Choking off air supplies • Higher forced outage rate from: • Cyclone and/or Loop Seal pluggages • Inability to remove bed material

Fouling occur due to the low boiling point of many components and impuri-ties in the fuels being used many of which contain low boiling point phases causing "sticky ash". Up to now many of the solutions have been to clean fouling as it starts accu-mulating - this cleaning affects the performance of the boiler and it may not fix the problem. Aurora is a product that is added to the fuel, once at the boiler this product preferentially captures harmful alkalis forming compounds with much higher melting temperatures, which do not condense. These compounds do not form agglomerates and are easily removed with the ash. Aurora is typically added at a rate of between 0.5% to 2% of the fuel blend.

Boiler Tubes Before

Boiler Tubes Before

After

After



TURBINES

TurboCareTurboCare is a leader in providing integrated aftermarket solutions, including repair services and replacement parts for virtually all makes of turbomachinery, and specializes in the design, manufacture and application of engineered component and repair upgrades.

Electric Motors

G enerators

CompressorSteam TurbinesGas Turbines

REPAIRS AND OVERHAULS

> Frame 3 > Frame 5 > Frame 6 > Frame 7EA/9EA > Frame 7FA > GT11® > GT13® > MW101 / MW191 > MW251 > MW701D Series > 501> Fiat TG7 / TG16 > Fiat TG20 > Fiat TG50F / 701F

INSPECTION AND REPAIRS

> Rotor Inspections> Centrifugal Compressor Rotors> Axial Compressor Rotors> Shaft Journals and Tapers> Advanced Rotor Welding> Re-Staging or Re-Blading> Rotor Low Speed Balance> Rotor High Speed Balance> Stationary Component Repairs

REPLACEMENT PARTS

> Centrifugal Impellers> Axial Compressor Blades> Diaphragms> Labyrinth Seals & J-Strips> Bearings Solutions> Couplings


> Steam Turbine Repair > New Rotor Manufacture > Advanced Rotor Welding > Rotor Low Speed Balance > Rotor High Speed Balance > Rotor Storage > Stationary Component Repairs > Valve Inspection and Repair > Boiler Feed Pump Repairs


> Generator Overhaul > Rotor High Speed Balance > Stator & Rotor Rewinding> CO2 Dry Ice Blasting

> Insulation Systems > Mechanical Repairs > Rotor Repair &

Manufacturing > Armature Winding &

Repair> Modifications &

Troubleshooting> Sensors & Accessories


• Removes Soluble Varnish From Turbine Oils Through Adsorption, Utilizing Ion-Exchange Resin Beads • Achieve Low Varnish Potential Rating In Turbine Oil - VPR of 30 or Lower• Particulate Removal Filter Element Removes Particulate Contamination To Meet Or Exceed ISO 16/14/11 Cleanliness Level


VACUUM DEHYDRATION OIL PURIFICATION SYSTEMS (VDOPS)

COALESCER OIL PURIFICATION SYSTEMS (COPS)

COMMON APPLICATIONS FOR VACUUM DEHYDRATORS:• STEAM TURBINES (LEAKING STEAM SEALS)

• Rapidly Removes Free Water From ISO 32 Turbine Oil To Overall Content As Low As 100- 150 PPM.• Particulate Removal Filter Elements Remove Particulate Contamination To Meet Or Exceed ISO 16/14/11 Cleanliness Level.

• Meet Or Exceed All Kaydon TurboToc Material & Performance Specifications .

VARNISH REMOVAL SYSTEM (VRS)


HEAT TRANSFER & COOLING TOWERS

API Heat TransferIs a global leader in the design and manufacture of a wide range of heat transfer technologies that service

virtually every industrial market including food and beverage, dairy, compressors, air separation, chemical

processing, mobile vehicles, power generation, pharmaceuticals, HVAC, and a wide variety of general

industrial applications.


Paharpur Cooling Towers LimitedAn ISO 9001 Company

Our broad spectrum of products ranges from small factory assembled units through large concrete towers which require construction on site, air cooled heat exchangers and air cooled condensers.


Paharpur is also able to provideaftermarket components for Marley cooling towers.

(Bidirectional Hydrodynamic Drive)

• 100% screen cleaning with controlled suction nozzle rotation• Flush waste is less than 1% of filtrate flow• 70% fewer moving parts• Individual flow rates from 32 gpm to 5,400 gpm (7.3 - 1,226 m3/hr)• Pre-assembled filtration systems to meet any flow demand• Filtration 10 to 1500 micron

CTS-200P-05-XXXCooling Tower Skid with Pump & V-200PA Filter

Cooling Tower Basin

TowerWater Outlet

Filtered Outlet WaterTo Manifold OfTurbulator TM Nozzles

Turbulator TM NozzlesPrevent Settling OfParticulate To MaintainA Clean Basin

Sump Drain toFiltration Skid Inlet

VAF Cooling Tower Filter Systems Award Winning Simplicity in Filtration

Filtration Systems.

Cooling Tower Filtration SystemsFiltration Systems

Pump Seal Filtration Systems

V- Series Filters Provide State of theArtAutomatic Self-Cleaning

The patented BHD Drive improves screen cleaning efficienciesresulting in:

3 x V-1500 Filtration Skid Filtering Reclaimed WaterEntire Skid Manufactured From 316L Stainless Steel Due To Corrosive Environment.Power Plant Was Replacing Over $80,000 In Pump Seals A Month Prior To Installation.System Operating With Low Pressure Condi-tions.



PROCESS WATER & FLUIDS HANDLING EQUIPMENT

Lawsco

Pressure Filtration

Activated Carbon PurifiersIon Exchange SoftenersClarifiersMixed bed demineralization andDegassing unitsReverse OsmosisUltrafiltrationDeaereadoresChlorinatorsOzonatorUltraviolet LightStock Replacement PartsWater transfer pumps and Chemical Metering PumpsInstrumentation (Conductivity, Flow Meters & Sensors, pH meters, etc.).

ENVIRONMENTAL PROTECTION

Anaerobic Systems / NeutralizationWater ReclamationTertiary TreatmentAerobic SystemsPackage System Wastewater TreatmentNeutralization SystemFluoride RemovalFlotation System for Treating Industrial Waste High BOD3 (3000ppm). Oil Separation Systems

OTHER SERVICESBasic Engineering ProjectsDetailed Project EngineeringIon exchange resins (Purolite)Water Treatment ProductsIndustrial Plant Design

• Engineering• Design• Construction• Water Analysis

Filter media (activated carbon, Sand, Anthracite, Gravel, Garnet, Green Arena) Rehabilitation Service and Mainte

-

nance of Water Treatment Systems Automatic Valves.

DRINKING WATER TREATMENTWATER TREATMENT FOR PROCESS

WASTEWATER TREATMENTSEWAGE TREATMENT

WATER TREATMENT FOR BOILERS AND COOLING TOWERS


Filtration Systems

• Industrial• Desalinization• Cooling Towers• Seawater• Greywater• Wastewater• Process Water• Irrigation• Reinjection

LaFarge Cement Plant, AlabamaFiltration of Recycled Process Water2,500 gpm at 300 micron

V-Series Automatic Screen FiltersPatented Bi-Directional Screw controlsnozzle rotation for 100% screen cleaningWithout electric motors, gear boxes, limitswitches or pistons

Uni-weld “Sintered” Screen• 316L Stainless steel• Eliminates screen wear• Maximizes filtering area• 10 to 1500 micron

Constructed of 316L Stainless Steelto ASME code - higher gradematerials to meet harsherconditions or higher temperatureand pressure ranges.

Flushing Outlet

FlushingIndicator

BHD DriveMotor

SuctionNozzle

• Lowest flush flow rate• Less energy/smaller pumps required

Rotation Governor

IntakeScreen


WALWORTH® is a company at which the employees have a vast amount of experiences and dedication. Our personnel have served to keep the company at the leading edge of


VALVE TYPES: Gate, Globe, Check, Ball, Pressure Seal, AWWA Butterfly and Plug Valves

MATERIALS:

• Carbon Steels (Medium and Low-Carbon)

• Chromium Alloy Steels

• Austenitic Stainless Steels

• Duplex Stainless Steels

• Nickel Alloys (Incoloy, Inconel, Hastelloy, etc.)

• Aluminum Bronze

• Ductile Iron

PRESSURE CLASSESWalworth® products are offered in pressure

Our facilities have equipment for non-destructive examinations, mechanical tests and functionality tests such as:

• Radiography • Magnetic Particles

• Liquid Penetrants • PMI

• Ultrasonic • Stress Tests

• Hardness Tests • Fire Tests

• Cryogenic Service Tests • Fluid Control Tests

design and innovation since it was founded in 1842. Our valves are designed and manufactured to meet the most stringent special requirements of various industries, including power generation, chemical and petrochemical, oil and gas, pulp and paper, mining, cryogenic and ship building applications.

classes 150 to 4500.

SIZES½” to 72” in diameter.TESTS

AWWA Butterfly ValvesSize: From 3" to 72"Pressure range: 150 psiBody Materials: Cast iron, high resistance cast ironDesign Feature: In accordance with AWWA C-504

Safety and Relief Valves

Cast Iron ValvesType: Gate, Globe and Swing Check ValvesSize: Gate valves from 2" to 36" Globe valves from 2" to 12" Swing check valves from 2" to 24"Pressure Range: 125 psiDesigned in accordance with the following standards: - MSS SP-70 for Gate Valves - MSS SP-85 for Globe Valves - MSS-SP-71 for Swing Check Valves

Cast Bronze ValvesType: Gate, Globe and and Swing Check ValvesSize: From 1/4" to 2"Pressure Range: 125 and 150 psiDesign Feature: Design in accordance with MSS-SP 80

Size: Orifices from D to TPressure Range: 150x150, 300x150 and 600x150 psiBody Materials: Bronze for safety valves and steel for safety and relief valvesDesign Feature: In accordance with ASME Sec. VII and API-526


Steel Lubricated Plug Valves

Iron Lubricated Plug Valves

Pressure Seal ValvesTypes: Gate, Globe and Check (Stop Check, Piston Check) Sizes: From 2" to 24" Class: 600, 900, 1500 and 2500 psi Materials: Carbon steel, stainless steel and alloyed steel. Trim: API-600 or as specified by the customer Design Feature: ASME/ANSI B16.34

Duo Check Valves (Dual Plate)Size: From 2" to 48"Class: From 150 to 1500 psiMaterials: carbon steel, stainless steel and alloyed steelTrim: In accordance with MSS-SP 594 or as specified by the customer

Types: Top Entry and Bottom EntryPattern: - Short - From 2" to 12" - Regular - From 1/2" to 12" - Venturi - From 6" to 36"Materials: Carbon steel, stainless steel, alloyed steelPressure Range for Bottom Entry: - ASME 150 (PN20), 300 (PN50), 600 (PN110), 900 (PN150), 1500 (PN260) and 2500 (PN420) - API 2000, 3000 and 5000Pressure Range for Bottom Entry: - ASME 150, 300 and 600

Types: Top Entry in 3 patterns: Short, Regular and Venturi in sizes from 1/4" to 36"Pattern: - Short - From 2" to 12" - Regular - From 1/2" to 12" - Venturi - From 6" to 36"Materials: Carbon steel body and iron plug Iron body and plug

Classes: Steel Body and Iron Plug: ANSI 150 and 200 CWP Iron Body and Plug: 175 CWP, 200 CWP and 500 CWP

Design feature: In accordance with API-599


Cast Steel ValvesTypes: Gate (sizes from 2" to 72"), Globe (sizes from 2" to 20"), Check (sizes from 2" to 48")Pressure Range: ANSI 150, 300, 600, 900 and 1500Design features: Gate Valve design in accordance API 600 - Globe Valve design in accordance ASME/ANSI B16.34 - Check Valve design in accordance API-6DBody Materials: Carbon Steel, Stainless Steel, Steel Alloys, Nickel Alloys, Hastelloy, Incoloy, Etc.

Forged Steel Valves

Ball ValvesType: Trunnion MountedSizes: From 2" to 48"Pressure Range: ANSI/ASME 150, 300, 600, 900 and 1500Body Material: Carbon steel, stainless SteelTrim: NACE, low temperature and stainless steelDesign Features: In Accordance with API-6D

Slab Gate ValvesSizes: From 2" to 36"Pressure Range: ANSI/ASME 150, 300, 600, 900Body Material: Carbon steel, stainless SteelTrim: NACE, low temperature and stainless steelDesign Features: In Accordance with API-6D

Types: Gate, Globe & CheckSizes: From 1/4" to 2"Pressure Range: - Socket Welds, Threaded and Combined Ends: ANSI Classes 800, 1500 and 2500 - Flanged Valves: ANSI Classes 150, 300, 600, 900 and 1500Design features: Gate valve design in accordance with API 602Body Materials: Carbon Steel, Stainless Steel, Steel Alloys, Nickel Alloys, Hastelloy, Incoloy, Etc.


-

45 YEARS OF EXPERIENCE AND TRUST

wide variety of applications such us wastewater, bulk handling, pulp & paper and other process industries. Over 45 years’ expeAt ORBINOX we offer a wide range of knife gate valves, penstocks, clampers and special valves for waterworks which cover a

-rience in the international as well as the trust of our customers vouch for the success that we have achieved in design, market worldwide, manufacturing and distribution.


Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products move, measure, control, dispense and apply a wide range of fluids and viscous materials used in vehicle lubrication, commercial and industrial settings.

Process SolutionsHusky 205

Husky 307

Husky 515

Husky 716

Husky 1050

Husky 1590

Husky 2150

Husky 3275


THE MOST ROBUST CENTRIFUGAL PUMPS IN THE MARKET

THE ONLY PUMP MANUFACTURER ABLE TO PROVIDE A TRUE HYDRO-DYNAMIC SEAL -

The dynamic seal provides for zero leakage of the pumped product without the need for costly mechanical seals, packing, and lip seals or in most cases seal water and the associated supporting seal water systems. Product dilution due to seal water is further eliminated.

With no rubbing seal components to fail over time, the dynamic seal can operate reliably over the life of the hydraulic wet end of the pump.

Dynamic seals can offer reliable service in difficult applica-tions that may include; varying amounts of solids, liquids that are close to saturation prone to crystallizing, scaling liquids and where operational upsets such as cavitation, dead head-ing of the pump and even dry running can occur.


-


ELIMINATE PUMP OUTAGES FOREVER- Most pump forced outages are related to failure of their seals be that mechanical or rope seals.

- Our pumps do not have any seals - they have a special impeller that creates an air bubble that acts as a seal - this type of seal is called a hydro-dynamic seal. Our hydro-dynamic seal is backed up by another seal that only operates when the pump is not in operation - this seal opens up by centrifugal force and therefore it will last the life the pump. Please note that we are the only pump manufacturer that operates a hydro-dynamic seal with a centrifugal type of secondary seal - this double sealing technique guarantees the elimination of outages due to sealing failures.

- Our pumps are also 20% to 50% sturdier than any leading pump in the market.

- Our pumps are able to handle solids up to 65% by volume.

- When dealing with slurries or highly abrasive liquids we have ability to remove the impeller from directly contacting the flow, this is done via a vortex action - this dramatically reduces impeller wear and eliminates the chance of impeller damage thus we avoid impeller related forced outages.

- Our pumps can handle water as well as harsh chemicals. - Conventional pump seals need to be cooled, the simplest method of cooling a seal is by either injecting water into the system or by letting the product leak out. Since our technology does not use any seals we eliminate the injection of liquids into the system or the leaking out of valuable product. Please note that in certain processes any water that is injected into the system has to be subsequently evaporated - this is the single most expensive expense of running a pump with conventional seals.


ELECTRICAL, CONTROLS, AUTOMATION &

INSTRUMENTATION EQUIPMENT

Process instrumentation & Analytics

Pressure

P/p P

temperature Positioners

electro-pneumatic

Pneumatic

Drivers

Plotters

Instrument panel

Software

level

capacitive Ultrasonic Radar Guided Wave

Flow

Ultrasonic

Static and dynamic weighing

Totally Integrated Automation and Micro Automation


AftermarketProductsServices & Support

Logic Control

Intelligent Relays Operatior InterfacePower SuppliesProgrammable Logic ControllersPushbuttons & SelectorsRelays and TimersSensing and Monitoring RelaysSpecific Control & Display (Durant)StackilghtsTerminal Blocks, Fuse Blocks & Fuse HoldersVehicle and Conmercial Controls

Motor Control

Accessories & Renewal PartsBrakes & SolenoidsCommunication and 1/0 ProductsCrane Control Products DC Contactors Definite PurposeDisconnect SwitchesDynamic Braking ResistorsIEC Starters & Contactors Low Voltage Adjustable Frequency DrivesManual Motor ControlMCC Aftermarket Solutions MCC communicationsMedium Voltage Ajustable Frequency DrivesMadium Voltage Motor ControlMorot Control CentersNENA Starters & Contactors Overload RelaysReduced Voltage Solid-State StartersVacuum Control

Automatic Transfer Switches

Afteermarket and Renewal PartsApplication and Strart-up Support ATS DrawingsBypass lsolation Transfer Switches Free Standing Transfer SwitchesInteractive Demos Residential Transfer SwitchWall Mount Transfer Switches

Circuit Protection

Digitrip Retrofit Trip UnitsIndustrial Miniature Circuit BreakersLow Voltage Power Breakers Medium Voltage Power Breakers Power FusesSeries G Molded Case Circuit Breakers Series C Molded Case Circuit Breakers Specialty Molded Case Circuit Breakers

Electrical DistributionMetering, ModularMetering, CombinationMetering, Safety SocketsIntegrated Facility SystemsNetwork ProtectorsPow-R-Command Lighiting and load ControlSwitchboardsBusway TransformersVacuumlnterrupters Tenant Metering

Enclosed ControlAccessories Adjustable Frequency Drives Definite PurposeEnclosuresIEC Rated Products Lighting ContactorsManual Motor ControlMultispeed StartersNEMA 7/9 ProductsPump PanelsReduced VoltageVacuum Break Control

Lighting ControlLighting Contactors Lighting PanelboardsPow/R/Command Lighting and Load Control

Power Quality & Management

Communications HardwareDC Power SuppliesEPDU rack/based power distributionHarmonic MitigationHigh Resistance Pulse GroundingInnovative Technology TVSSMetering (IO & Power Xpert)Power ConditioningPower Distribution – Floor based Power Factor CorrectionPower Monitoring Systems (Power X pert)

-


AUTOMATION SPECIALIST INDUSTRIAL PROCESS CONTROL

•INSTALLATION OF ELECTROMECHANICAL EQUIPMENT.• INSTALLATION AND PARAMETRIZATION OF INSTRUMENTATION EQUIPMENT.• AUTOMATION OF EXISTING EQUIPMENTS AND/OR PROCESSES.• MAINTENANCE, UPDATING AND IMPROVING OF EXISTING AUTOMATED SYSTEMS.• ASSEMBLY OF MOTOR CONTROL CENTERS (MCC) IEC AND NEMA.• PLC AND HUMAN MACHINE INTERFACE (HMI) PROGRAMMING• CONTROL SYSTEMS ENGINEERING CONCEPTUALIZATION, DESIGN AND DEVELOPMENT• PROGRAMMING AND PARAMETRIZATION OF PROCESS CONTROLLERS.• DESIGN AND ASSEMBLY OF POWER FACTOR CORRECTION EQUIPMENT.• DESIGN AND ASSEMBLY OF CUSTOM AUTOMATIC TRANSFER SWITCHES.• POWER QUALITY MEASUREMENT, ANALYSIS AND CORRECTION.• ENERGY SAVINGS STUDIES.• AUTHORIZED SYSTEM INTEGRATOR FOR LEADING BRANDS OF INDUSTRIAL AUTOMATION AND CONTROL EQUIPMENT.

SYSTEMS INTEGRATORS


Tracerco provides a full range of nucleonic level measurement detectors . By providing a full range of technologies and not limiting to one or two techniques, Tracerco can provide a solution to any client request, and provide the most effective and safe transmitter by tailoring the measurement to the specifics of the clients operations. Tracerco's software (inside each nucleonic level measure-ment instrument) is the most advanced currently available, providing adaptive techniques to track process changes faster than any other system on the market, reducing noise, improving response and providing a solution using the smallest source size for worker safety.


• Ultra sensitive design enables highly accurate measurements with small source size• Detectors tuned to the specific radiation source in use, and not susceptible to interference• Real time external measurements without contact with the process• Simplified design and construction, resulting in a dramatic saving to the customer• Low maintenance and spare requirements due to the simplicity of design• Both process wetted, and non-wetted (non-intrusive) possibilities• Automatic source decay compensation• Automatic pressure compensation• Simple two-wire or three-wire communications wiring• Zones 0, 1 and 2 use - Intrinsically Safe• HART, Modbus, Foundation Fieldbus options• Plastic or Sodium Iodide Scintillators, and GM tube options available• Measurements can be provided of: Oils, emulsions, foams, water, sand, condensates, liquids, solids, rag layers, middlings and many other process variables.

Detection points

Emission points

NUCLEONIC LEVEL GAUGES

The nucleonic level measurement product family allows:

TRACERCO™ Smart Density Gauge


Detector

Emitter

The TRACERCO™ Smart Density Gauge is a non-intrusive, non-wetted field instrument which utilizes advanced nucleonic measurement technology. The instrument, which is a fully bespoke design, can easily be fitted to new production vessels or retrofitted onto exiting units.

A narrow beam from the radioactive source is directed though the vessel or pipe to a detec-tor mounted opposite. The beam will be attenuated by the vessel walls and the process medium. As attenuation by the walls is constant any variation in intensity at the detector willbe caused by the process medium. During calibration a density to intensity relationship is established which allows the signal processor to compute any density from the measured intensity at the detector.tion vessels or retrofitted onto exiting units.

Principle of Operation

The detector (PRI 116c-ATX) comprises a scintillator (crystal) and a high voltage photomulti-plier tube. Gamma radiation entering the crystal produces minute pulses of light at a frequency proportional to the intensity of radiation. The light pulses are detected by thephotocathode of the photomultisplier tube and converted to small voltage pulses. These are amplified within the tube to a size sensible for further amplification by the detectors electronic circuit.

Pulses of a standard height are then passed via the interconnecting cable to the PRI 160 HART interface. Because of the statistically random nature of this pulse stream, an integrat-ing factor (time constant) is applied. This steadier signal is computed into a figure fordensity. Temperature correction may be made before a final density figure is displayed and transmitted to the plant’s instrumentation.


COMPLIANCE

MRU INSTRUMENTS, INC

DM9200Multi ranges, multifeatures

Digital Manometer

PROCESS ANALYZERS

Gas Detectors300CO

5 Gas HandheldAmPro 2000O2, CO, NO + NO2 and SO2 or H2S or High COTHE MOST POWERFUL HANDHELDMULTIGAS ANALYZER FOR INDUSTRIALCOMBUSTIONS, EMISSION ANDPROCESS MONITORING MEASUREMENTSUSING UP TO 5 ELECTROCHEMICAL SENSORS

• Modern, slimline enclosure with fixing magnets• Super bright, colour 3,5” TFT-display with LED backlight.• Rechargeable Lithium-Ion battery for min. 15 hours operation.

DELTA 1600S-IVO2 + CO, NO, CO2 & Hydrocarbons• Compact portable analyzer for robust industrial applications using NDIR & electro-chemical sensors.• Robust sample pump

5 Gas Portable

GAS ANALYZERS

AmPro 1000O2, CO, NO, NO2, SO2, or H2S orO2 + CO, NO, NO2, SO2, or H2S

THIS IS THE IDEAL COMBUSTION ANALYZER FOR INSTALLATION AND MAINTENANCE

ALWAYS DEPENDABLEMain features:• Smallest instrument with ergonomic and modern design• Rugged rubber protection case with fixing magnet• Optimized condensate trap with reusable star filter (PTFE)•Well legible, backlit LCD display• Mini USB interface for cable data transfer to PC and internal battery charging• Data storage for up to 100 measurements• Integrated rechargeable batteries (NiMh) for min. 8 hours


4 Gas Mobile NOVA 2000O2, CO, CO2, NO, NO2, or SO2

• Heavy duty workhorse for the toughest jobs• Complete basic instrument, ready to take measure ments.• Upgradable to top-of-the-line capabilities using versa tile hardware and software.• Very secure: select materials used in construction and most functions are monitored electronically.• Up to 4 electrochemical cells• Suitable for solid fuel combustion measurements.

MGA 5Monitoring of Process gases / Combustion emissions Heat efficiency at large boilers High quality combustion analysis O2, CO, CO2, NO, NO2, SO2, CH4, H2, & C3H8

• Double stage gas cooler with automatic condensate draining pump• Heated gas sampling line (120" or 200") with 12" ... 80" sample tube• Large, high contrast and backlit graphical display with zoom function• RS 232 interface and internal data memory for approx. 8,500 measurements

PORTABLEP ROCESS GAS ANALYZER

9 GAS MOBILE

PORTABLEP ROCESS GAS ANALYZER

VARIOPLUSO2, CO, CO2, NO, NO2, SO2, H2S, H2 & Hydrocar-bons

• Virtually a mobile CEMS• Modern, rugged metal enclosure designed for the roughest applications• Effective, integrated flue gas conditioner with gas cooler & condensate pump• Auto zero• Optimized filter elements for protection against particulates• Built-in, high speed, easy-load printer

SWG 200-1Gas analysis of combustion processesand special gases

O2, CO, CO2, NO, NO2, SO2, CH4, H2, H2S & CxHy

• Standard extractive analyzer for process andenvironmental measurements• Complete sample gas conditioning system• NDIR & long-life EC sensors• Backlit LCD display and menu-guided operation• 4 – 20 mA and RS485 outputs• Wide range of probes available• Flue and air gas temperature measurements• PC based software• Auto zero


SWG 300-1Customized compact analysis systems

O2, CO, CO2, NO, NO2, NOx, SO2, & CH4,

Individual applications• Ex-zone2 (special model)• Up to simultaneous 7 gas components• Up to 5 automatic sampling point switching• Weather proof enclosure IP 65• Complete / partial air conditioning• Automatic calibration with test gases• Sample gas conditioning, also directly after thesampling point• Easy to service and maintain• Customized solutions on request

STATIONARYCEM SYSTEMS

IN-SITU O2 AND COeOMS 420O2, and COe

• Modern, field-proven “hollow probe” design• A single technician can access sensors in minutes for maintenance or service.• Auto calibration available• Electronics can be located on the probe, or up to 33’ away• High pressure blow-back keeps probe clean even in a difficult application like a coal-fired power plant

DM 401

DUST or OPACITYDust Monitoring SystemDouble pass transmission measurementMeasures 0 ... 100 % opacityor 10 ... 1,000 mg/m3 dust (*)(*) after on site calibration according to VDI 2066

DUST / OPACITY MONITOR


EcoPulse PulseJet Fabric Filter for particulate matter capture. OptiVap Evaporative Spray Cooling System for hot gas cooling. EcoSorb Limestone Emission Control (LEC). Turbulent Fluid Bed (TFB) Systems for the control of gaseous pollutants.



ENGINE BASED POWER GENERATION

SWIVEL ANGLE MIXERS IN YOUR STORAGE TANKS WILL PREVENT THE ACUMULATION OF TANK BOTTOMS

Through extensive computational fluid dynamics (CFD) analysis, Philadelphia Mixing Solutions has proven the inadequacies of the industry standard propeller and shows why their propellers along with their swivel angle mixers can prevent deposition of particulates into your tank bottoms. By utilizing the most advanced technol-ogy available in the marketplace PMSL has not only been able to create a propeller that is superior in design, but also remove the mystery of what is happening inside the tank!

-


Standard propeller Philadelphia's advance propeller

Manufactured in Houston, TX, USA

TOP QUALITY CENTRIFUGES & DECANTERS SINCE 1927

SPARE PARTS FOR ALFA LAVAL & WESTFALIA CENTRIFUGES

TOP QUALITY CENTRIFUGES & DECANTERS SINCE 1927

& WESTFALIA EQUIPMENTCENTRIFUGE AND DECANTER REPAIRS - WE REPAIR ALFA LAVAL CENTRIFUGE AND DECANTER REPAIRS - WE REPAIR ALFA LAVAL

& WESTFALIA EQUIPMENTSPARE PARTS FOR ALFA LAVAL & WESTFALIA CENTRIFUGES

HUTCHISON HAYES SEPARATION INC.


Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products move, measure, control, dispense and apply a wide range of fluids and viscous materials used in vehicle lubrication, commercial and industrial settings.

Process SolutionsHusky 205

Husky 307

Husky 515

Husky 716

Husky 1050

Husky 1590

Husky 2150

Husky 3275


INCREASE THE EFFICIENCY OF YOUR ENGINES BY USING WATERLESS COOLANT

Evans Waterless Heavy Duty Thermal Coolant Reduces maintenance and wear-and-tear.

Traditional 50/50 glycol-water solutions waste a substantial amount of fuel just to keep the water segment from reaching its boiling point. Over time, water also becomes acidic and causes erosion of engine components. A major reason why 40% of maintenance costs are cooling system related.

The sustainable solution you never have to replace.

With Evans Waterless HDTC, regular coolant change-outs and disposal costs are a thing of the past. Plus, our fuel savings lead directly to fewer emissions. Evans Waterless HDTC contains an inhibitor that lowers the toxicity of ethylene glycol. Explore the additional details on our website, and on the reverse side of this piece. Then contact us for a customized proposal for your fleet.

Evans Waterless Coolant enables an engine to run safely at hotter temperatures. Both the fan-on temperature and the thermostat temperature can be raised. These have shown a substantial increase in fuel efficiency in indepen-dent lab testing, while exhibiting even higher results in real-life case studies.


Eliminating the cavitation and corrosion that can kill an engine.

Flash vaporization takes its toll on pumps, cylinder liners and hose systems. Evans Waterless HDTC prevents hot spots in the engine through constant contact with the hot metal. Reducing overall system stress and preventing rust and baked-on additives that can shorten engine life.

INCREASE THE EFFICIENCY OF YOUR ENGINES BY USING WATERLESS COOLANT

ADDITIONAL BENEFITS OF USING WATERLESS BASED COOLANTS VS. WATER BASED COOLANTS


• Removes Water (Free, Emulsified, and Dissolved) To Overall Content As Low As 20 PPM

• Removes Entrained Air & Gases

• Particulate Removal Filter Element Removes Particulate Contamination To Meet Or Exceed ISO 16/14/11 Cleanliness Level

VACUUM DEHYDRATION OIL

PURIFICATION SYSTEMS (VDOPS)

COMPLETE BUNKER FUEL FILTERING

SYSTEM FOR ENGINE BASED POWER GENERATION

VDOPS SCHEMATICMorris Sallick Industrial Supplies, Inc. Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering

INCREASE FUEL EFFICIENCY AND EXTEND THE LIFE OF YOUR

REMOVES PARTICULATE CONTAMINATION AND MOISTURE FROM DIESEL FUEL AND/OR GASOLINE

CAN HANDLE FLOW RATES FROM 10 GPM TO 500 GPM OR HIGHER

ACHIEVE PARTICLE COUNTS AS LOW AS ISO 14/13/11

ACHIEVE MOISTURE CONTENT AS LOW AS 15 PPM

RECIRCULATES AND FILTERS FUEL IN STAND-BY DIESEL GENERATOR TANKS

SPECIAL DESIGNS CAN AUTOMATICALLY PUMP FILTERED FUEL FROM BULK TANK TO GENERATOR BELLY TANKS

REMOVES PARTICULATE CONTAMINATION AND MOISTURE FROM DIESEL FUEL

ACHIEVES FUEL CLEANLINESS LEVEL AS LOW AS ISO 14/13/11

LOWERS OVERALL MOISTURE CONTENT IN FUEL TO 50 PPM OR LOWER


ENGINES/GENERATORS VIA FILTERING OF DIESEL FUEL


COAL / COKE FUEL BASED POWER GENERATION

Köppern

Profiled HEXADUR® roll surface • Cement Clinker• Limestone• Ores• Kimberlite • Quartzite• Nickel• Kieserite• Coal• etc.v

• Potash• Ammonium Sulphate• NPK-Fertilizers• Sodium Sulphate• Salts• Soda Ash• Roasted Pyrite• Ceramic Material• etc.

• Sponge Iron• Steel Mill Residues• Coal• Magnesium Oxides• Cast Iron Borings• Filter Dusts• Chromium Ore• Copper Concentrates• etc.

Provides roll press technology for the briquetting and compaction of fine materials and for the comminution of mineral materials since over 100 years. Close to 1,000 roll presses have been supplied to various industries. Köppern roll presses offer special features such as the hinged frame and Hexadur® wear protection. Material testing facilities are available in Germany, Canada, USA and Australia.


UNIVERSAL ROLL CRUSHERSFOR COAL

• Reduces R.O.M. coal to 1-1/2” product in a single pass• Long teeth on roll grip material and pull it into the V-shaped crushing chamber • Economical low horsepower, low speed operation• Low headroom requirements.• Models available for all specifications and materials

• Hydraulically adjustable roll setting keeps fines to a minimum

• Rubber tire drive eliminates heavy star gears• Meshing teeth reduce hard coals by impact• Ten sizes available

SINGLE STAGE SINGLE ROLL

SINGLE STAGE DOUBLE ROLL

UNIVERSAL ROLL CRUSHERS

UNIVERSALENGINEERING

The complete line of Universal Roll Crushers for coal

includes sizes and types for many coal crushing

applications. Both single stage and two stage

models are available for primary, secondary or

combined crushing. Run of the mine coal can be

quickly and efficiently reduced to the desired size

without excessive fines. Universal Roll Crushers offer

Reduction byshear and attrition in the single roll

model and reduction by impact and compression

between the rolls of the multiroll models.

The Universal Triple Roll Crusher combines primary

and secondary reduction in a single, compact unit.

As the diagram illustrates, the primary roll is

mounted above the two secondary rolls. Capacity of

this versatile unit ranges from 100 to 300 STPH

depending on the type of coal being crushed and

desired product size.

With two sets of rolls, the Universal Four Rollcrusher

can reduce 10” R.O.M. coal to a 1/2”cubical product

quickly and efficiently. As theabove diagram

illustrates, the roughing rollshave long teeth to catch

material and pull itdown. The crushed coal from the

roughingrolls falls directly onto the finishing rolls.

Eachset of rolls is independently adjustable to

controlproduct size and flow. Capacity rangesto 500

STPH.

Every Universal Roll Crusher is built to provide years

of dependable service. Anti-friction bearings carry

the large roll shafts and assemblies smoothly . The

bearings are close to the rolls so they carry the load

efficiently and eliminate the danger of shaft flexing.

The heavy duty drive gear and pinion used in

Universal Roll Crushers are heat treated. They

provide positive, efficient power while withstanding

heavy shock loads. Machine cut teeth assure smooth

operation and longer life.


ANALYZE COAL AS IT IS BEING DELIVERED TO YOUR PORT TO DETERMINE IF IT MEETS YOUR REQUIREMENTS

SABIA offers analyzers to assist your plant in blending measurement and control, receiving validation, advanced combustion and post com-bustion control, emissions control from feedstock knowledge, test burn, and purchasing opportunity evaluation. SABIA analyzers provide realtime elemental analysis through continuous measure-ment of the elemental composition of the material under test. The list of displayed analysis results is

completely user defined and can include the amounts of sulfur, total ash, any or all ash constituents, as well as moisture content and BTU ratings. Using PGNA elemental analysis combined with our proprietary algo-rithms the analyzer integrated moisture feature mea-sures the total moisture of the coal, enabling a more accurate BTU result.With a SABIA analyzer you can: Optimize boiler efficiency Meet environmental regula-tionsControl blending Reduce derates Eliminate unplanned shutdowns


Safety for Coal Grinding Systems

THORWESTEN VENT GmbHDaimlerring 39 . 59269 Beckum / Germany . Tel. +49(0)2521/[email protected] . www.thorwesten.com

We provide explosion protection and related services for industries typically using coal, lignite,

and pet coke. We design complete concepts for explosion protection for the cement industry,

such as the new compact combination of separation and fines coal storage. Thorwesten Vent’s

air-cushioned explosion doors of the 2nd generation in various sizes and designs ensure

protection.We also supply engineering and hardware packages for solid fuel silos including

safety andprocess instrumentation, top of silo dust collectors, explosion doors, discharge aids

etc.


We provide complete solutionsand related services for industries typically using coal, lignite,pet coke and secondary fuels

2 barg pressure shock resistant secondary fuel silowith the TV patent flat roof

2 barg pressure shockresistant flat bottom withdischarging unit

The design includes all interfaces for infeedbox or other charging devices, TV nuisanceSilo top filter, explosion vents, instrumentationand access.

Most secondary fuels need a sweeping augerfor discharging. Additional to the conicalcylindrical section, a recirculation system canbe installed to prevent bridging of the dust.

Completeconcepts for your project

Constructionalexplosionprotection

Fullengineeringand hardwaresupply

Individualdesigns andsizes


From product selection and design to maintenance and repair, Dings is ready to help you with your magnetic separation needs


RULMECA is a worldwide Group of Companies, specialising in the production of rollers/idlers, motorized pulleys, fabricated pulleys and other components for the worldwide bulk handling industry.



Phoenix

Conveyor Belt Systems GmbH has produced conveyor belt, which include world records such as the strongest belts, both textile and steel cord, the steepest overland, and the world's heaviest belt.

Skirting Sealing Systems and Dust Control

Arrowhead Pulley Lagging Conveyor Safety Equipment Conveyor Accessories


Primary Belt Cleaners

Secondary Belt Cleaners

Transfer Point Design Technology

Belt Tracking Idlers

Load Zone Support Systems


FMC TechnologiesHas a proud history of providing bulk material handling solutions to industries worldwide. Around the globe, our name is synonymous with problem solving capabilities and material handling expertise.

• Conveyor Belt Idlers• Impact Beds• Belt Trippers• Stackers• Apron Feeders• Belt Feeders• Rotary Plow Feeders• Rotary Table Feeders• Syntron Feeders• Linkbelt Screw Feeders• Vibrators (Electromagnetic, Electric rotary & Pneumatic types)



BIOMASS FUEL BASEDPOWER GENERATION


WEIGHBELT FEEDERSOver 50 years ago WOHWA developed the first weigh belt feeders. Since that time WOHWA produces all the components for all WOHWA weigh belt feeders in house at its factory in Germany.

The robust WOHWA weigh belt feeders are available in belt widths from 16” (400mm) to 56” (1400mm) to satisfy all customer requirements of capacity and can handle all varia-tions in material characteristics, flow characteristics and applications.

All weigh belt feeders are furnished with troughed belts or Flexo Well belts. Precise design eliminates forces that can have an influence on the accuracy of the belt scale.

Depending on the application and the material characteristics each feeder can be furnished with different WOHWA shut off sliding gates. Type 02, 03, 08 or 01.1 can be utilised to cover a wide range of variants.

THE ONLY WAY TO TRULY MEASURE YOUR BOILERS EFFICIENCY


MAINTENANCE

EQUIPMENT

MEDIUMHEAVY

EXTRAHEAVY

01 SeriesMedium Duty Bearing Heavy Duty Bearing Extra Heavy Duty Bearing

02 Series 03 Series

BearingsHigh Speed BearingsBearingsWatercooled04 SeriesFlat Thrust

CUSTOM BEARINGS

Preferred by leading companies in over forty countries, Cooper reliability keeps the wheels of industry turning in some of the world's harshest industrial environments. The ability to fit Cooper in trapped application and limited access locations is one of the major factor in specifying Cooper.


BENEFITS OF USING COOPER'S SPLIT BEARINGS:- Ideal in trapped bearing applications and limited access locations. Cooper units are split in symmetrical halves, reason for which they can be replaced at a fraction of the time taken by conventional pillow block bearings.


- Significant reduction of your stock of bearings Cooper Bearings have such radial and axial capacities that they may be able to replace many different types of bearings with one type of Cooper Bearing - onsite bearing inventory stock can thus be reduced and simplified as only one type of bearing per shaft diameter would be needed.

- Save energy Cooper bearings are more efficient than conventional bearings.

- Replacement costs are reduced dramatically Because only the inner components are renewed. The housing is kept in place and used over and over. Cooper bearings are more robust than conventional bearings and for that reason they last longer

- Our bearings outlast any other bearing in the market. Because they have a special type of seal that rotates with the shaft inner contamination is virtually eliminated

- Reduce missalignment problems . Cooper bearings accept missalignment of up to 2.5%.

Air-Operated Pumps for Process IndustriesProcess Equipment

55 Gallon Drum Transfer and Supply

Pump from your 55 gallon drums with our double diaphragm or piston evacuation pumps. They offer flow rates up to 16 gpm, and are available in: aluminum, carbon steel, stainless steel, polypropylene and acetal materials of construction.

Double Diaphragm/ Piston Evacuation

Bulk Tank Supply and Evacuation

Husky™ air-operated double diaphragm pumps are ideal for unloading above or below ground tanks of any size. They are available in a wide range of sizes including: 1/4 in (6.3 mm), 3/8 in (9.4 mm), 1/2 in (12.7 mm), 3/4 in (19.1 mm), 1 in (25.4 mm), 1-1/2 in (38.1 mm), 2 in (50.8 mm) and 3 in (76.2 mm).

husky™Air-Operated

Double Diaphragm

Maintenance and Production Cleaning

Designed for rugged dependability, pneumatically-driven pumps offer simplicity in design, operation and maintenance. They provide high pressure for water and cleaning chemicals up to 3,000 psi and flow rates up to 9 gpm.

Pneumatic

Key Fluids• Paints, stains, coatings, inks and dyes• Chemicals• Acids• Corrosive and abrasive fluids• Lubricants• Ceramic glazes• Sludge, slurry and waste fluid • Soaps, detergents and solvent

Key Applications• Transferring fluids from drums• Sanitizing buildings and equipment• Removing waste fluid • Unloading fluids• Draining tanks and sumps • Transferring high temperature acids• Skimming and transferring oil• Servicing lubrication equipment


Graco offers a complete range of high performing automatic lubrication solutions

Pumps, metering devices, controllers and accessories for any budget or market.

Single Point Lubricators

Simple, reliable, and straightforward. Automatic lubrication benefits with minimal up-front investment–nothing could be easier.

Single Line Resistive Systems

Resistive products are the starting point for centralized automatic lubrication, offering simple oil metering solutions for tight spaces and budgets.

Single Line Parallel Systems

Straightforward designs that deliver precise mounts of lubrication to multiple points, simulta-neously. Easily expandable as your requirements grow.

Series Progressive Systems

The most advanced centralized lubrication solution–period. Provides positive lube cycle feedback, and is the system of choice when critical operations need protection against downtime

Air/Oil Systems

A constant flow of air helps keep bearings cool and free of contaminants while a precise amount of oil is supplied to ensure proper lubrication. Uses series progressive metering technology for positive lube cycle feedback.


G-Force 3540 GHW

AR RKV Series Pump

- Direct drive triplex piston pump- Aluminum, oil-bath crankcase with cooling fins- Solid ceramic plungers with continuously lubricated packings- Thermal relief valve protects the pump from over- temperature conditions- Built-in low pressure chemical injector with 4 foot tube.

Hot Water • Direct Drive • Severe Duty

The G-Force 3540 GHW hot water pressure washer is for those applications where cold water just won’t cut it. With hot water you can effectively clean grease, oil or any other heat reactive substance. use this pressure washer for the most demanding jobs needing hot water.

High-Pressure Gun and Hose

- Non-marking 50 foot hose has quick onnects, swivel and bend restrictors - Professional-grade insulated trigger gun comes with insulated dual lance

Honda Power

- Honda GX Contractor Grade Series engine delivers maximum performance- Contractor preferred engine with Oil Alert

diesel fired Burner

- Burner can run off of No. 1 or 2 diesel or kerosene- Maximum outlet temperature of 200° F [150° F rise]- Easy coil drain helps prevent freezing in cold weather- High quality fuel filter/water separator ensures clean fuel supply

rugged Steel frame

- Reinforced powder coated steel frame with center lift hook - Gun and hose holder for easy transport and storage- Tubed pneumatic tires roll easily over rough terrain and hold up to the harsh jobsite environment.

G-Force™ Pressure WashersGraco’s Complete Line of Professional Pressure Washers


PORTABLE FILTRATION SYSTEMS (LOW-FLOW)

10 GPM Dual Spin-On Filter Cart

For Low Viscosity Oils 10 GPM Single 820X Filter Cart

For High Viscosity Oils

DEDICATED KIDNEY-LOOP FILTRATION SYSTEMS


10 GPM SINGLE 840X FILTRATION SYSTEM

15 GPM DUAL 840X FILTRATION

SYSTEM

Vacuum Dehydration Oil Purification Systems (VDOPS)

• STEAM TURBINES (LEAKING STEAM SEALS)• BOILER FEED PUMPS• EHC SYSTEMS (PHOSPHASE ESTER – FYRQUEL)• HYDRAULIC POWER UNITS & RESERVOIRS• LARGE GEARBOXES• USED OIL RECLAMATION (HYDRAULIC, LUBE, ENGINE)• TRANSFORMERS (DEGASSIFICATION)• LARGE COMPRESSORS

COMMON APPLICATIONS FOR VACUUM DEHYDRATORS:


Mor

ris S

allic

k In

dust

rial S

uppl

ies,

Inc.

Mor

ris S

allic

k In

dust

rial S

uppl

ies,

Inc.

www.msis.org

Power Generation and Petroleum Industr iesPower Generation and Petroleum Industr ies


Contacts:Morris Sallick Industrial Supplies, Inc. (MSIS)

Email: [email protected]: [email protected]

MSN Messenger: [email protected]: rodsallick

Optica Nicaraguense 2 1/2 c. al este

Tel: +505-2266-2011Fax: +505-2266-0211Mobile: +505-8722-5000 - (NEW NUMBER)

Managua, Nicaragua

C/O Porter Industries5220 NW 72nd Ave.

Tel: +1-305-480-5875Fax: +1-305-480-5876Mobile: +1-305-992-2745

Bay 6 & 7Miami, FL 33166

power generation and petroleum industries brochure …msis.org/flash/power_generation.pdf ·...

Documents