Best solution for Energy Consumption Optimazation

Module- optimizer ECOD

Implementation Principle Street Lighting Module-Optimizer “ECOD” provides up to 28% energy savings for the

following reason: Voltage control of a network of street lights reduces the cost of maintenance of lamp replacement.

Module-Optimizer “ECOD” allows lighting fixtures require a lower amount of energy without affecting the amount of lighting, but significantly reduces cost.

Advantages include: Easy installation, anywhere. A lightweight and compact unit means easy

installation on any open apparatus for lighting control. Fast return on investment within 10 – 24 months. Reduces the cost of maintenance by prolonging the life of lamps. No additional charges to the existing infrastructure. The finished

product Module-Optimizer “ECOD” lighting provides immediate energy efficiency and savings.

Implementation Principle

Implementation Principle

Basic economic effects from the use of our equipment:

1. The total result of implementation of equipment in the energy system of the country, can be optimization up to 10-20% of electricity consumption, and thereby actually get new free capacity in a range of 10-20% of the existing ones.

2. Increase in the 1.5-2.5 times the service life of electrical equipment.

3. An increase of 10-15% Stability power producers (all generators electric stations throughout the country's energy system).

4. Due to the integrated use of our equipment in the power system of the country, you can increase price of a kilowatt of electricity by 10-20% without any impact on economy and population. The total value of payments will not increase, because of reduced consumption due to optimization. The resulting income can be used for modernization of electric networks and construction of new power plants, which will be necessary to build due to increase in electricity consumption.

Best Solutions to optimize energy consumption!

Do you know that current in a socket never complying with standards 220 V or 230 V, 110 V or 120 V? Yes, that statement is absolute truth.

You barely found 220 V or 230V, 110 V or 120 V (depends on country accepted standard) it’s almost always plus or minus 5-10%.

Usually, in large cities voltage close to the upper tolerance range.

Best Solutions to optimize energy consumption!

Why when you reduce the voltage decreases consumption?

The answer is simple: kW=U ( Volts) * I (Amps)*1000*PF

I = U / R- Ohm's law.

So when we reduce the Voltage that we reduce the strength of the current (Amps) , respectively we reduce consumption (kW)