power-linker reference list : electrical · pdf filegiven below is a list of electrical...

of 24

REFERENCE LIST : ELECTRICAL PROJECT DESIGN ENGINEERING

Given below is a list of Electrical Project Design Engineering jobs executed by us:

SR. NO.

NAME OF THE COMPANY DETAILS OF JOB EXECUTED

61.0 Deepak Fertilizers and Chemicals Limited, Taloja

Design Engineering for additional load - ASHU Plant at

Taloja.

The Scope of work shall include,

a. Review of Load Flow, Feasibility Check.

b. Engineering for tapping point.

c. Detail engineering for new switchboard.

60.0 ACC, Kymore The Scope of work shall include,

a. Protection Relay Setting job at NCPP.

b. Removal of 3.3 kV ASEA, MOCB Switchboard.

59.0 Hazira LNG Pvt. Ltd. Gujarat


a. Review of improve of existing Grid Islanding Scheme.

b. Working out Grid Islanding Relay Settings.

c. Suggesting suitable interlocks.

58.0 ACC, Kymore Removal of 3.3kV ASEA, MOCB Switchboard.

The Scope of work shall include.

a. Review of Existing Equipment rating and protections.

b. Prepare purchase specifications of protective relays.

c. Cable sizing.

d. Preparation of power cable schedule.

e. Modification in AC/DC schematics.

f. Work out relay settings

POWER-LINKER

GROUP

POWER LINKERS

of 24

SR. NO.


57.0 ACC, Kymore Design Engg. Services for disconnection of parallel

operation between CPP and Grid.

The scope of work shall include,

a. Detail Engineering of new 132kV, 8/10MVA

transformer bay :

Design and Detail Engineering of 132kV Transformer

Bay, this will include the following,

i. Preparation of Key single line diagram for

8/10 MVA transformer bay.

(from 132kV Primary side upto 6.6kV incomer)

ii. Preparation of functional procurement

specifications for 132kV Switchyard equipments,

I. Isolator,

II. Current Transformer,

III. Potential Transformer,

IV. Circuit Breaker,

V. Lightning Arrestor,

VI. Transformer Control Relay panel and

VII. Cable end termination kits.

iii. Preparation of layout drawings for various

equipments.

iv. Preparation of Earthing Layout.

v. Preparation of cable tray routing and trench

routing.

vi. Carrying out power and control cable sizing and

preparation of power cable and control cable

schedule.

of 24

SR. NO.


vii. Preparation of Interconnection drawing for

control circuit and interlocks.

viii. Review of Technical offer and vendor drawing

review of the equipments.

ix. Modification of Relay setting and Relay

Co-ordination for the modified system.

b. Modification in 11kV LC-3 Switchgear :

i. Preparation of,

I. Single Line Diagram with protections and

Interlocks for modified electrical system.

II. Functional Purchase specifications of New

11kV switchgear at LC-3 Substation.

III. Layout drawing of 11kV LC-3 switchgear.

ii. Carrying out power and control cable sizing

iii. Preparation of Interconnection drawing for

control circuit and Interlocks.

c. Modification in GT-1 CRP :

Following Engineering Services for modification of

GT-1 Control relay panel :

Design and engineering of Transformer protection,

recommendation and purchase specification of new

numerical relays, Master trip and Auxiliary relays.

56.0 ACL, Bhatapara

Design Engineering for 132 kV Switchyard Bay No.2

Protection Relay Setting and Relay Coordination

55.0 Thirumalai Chemicals Limited (TCL), Ranipet

Design Engineering Services - comments on electrical

feasibility in 5 MW Alternator.

of 24

SR. NO.


54.0 ACC, Kymore Design Engineering for conversion of 6 Nos. 6.6 kV BFP

Motor Feeders to 415V VFD fed BFP motor feeders at

50 MW CPP.


a. Prepare and submit Single Line Diagram with

Recommended Protections for VFD transformer.

b. Study and recommend protection relay model for VFD

transformer feeder.

c. Cable sizing for power cables for VFD transformer

and submit power cable schedule.

d. Preparation of new Autocad drawings after carrying

out modification in AC and DC schematic drawings

with revised protection.

e. Work out Relay Settings for recommended relays

maintaining relay co-ordination with existing system.

53.0 ACC, Kymore Providing Design Engineering Services for Raw Mill

Motor - 1.


a. Review of Motor specification and name plate details.

b. Study the Motor Characteristics.

c. Work out detailed Motor Protection Relay Settings for

Raw Mill -1 Motor for,

i. Areva Make Micom P220 - Motor Protection Relay

and

ii. ABB Make RADHA - Motor Differential Relay.

d. Prepare Schematic and Relay Connection Diagram for

installation of Micom P220 Relay.

of 24

SR. NO.


e. Engineering Review, Technical Assistance for changes

and Motor commissioning trial runs being carried out

at site.

52.0 ACC, Kymore

Design Engineering Services for Evacuation of Additional

7MW Power through new 8 MVA Transformer.


a. Basic Design Engineering For,

i. Protection of new 8 MVA, 11/3.3kV transformer,

recommendation and preparation of specification

of new numerical relays, Master trip and Auxiliary

relays.

ii. Review of existing protection scheme, prepare

and submit Single Line Diagram with protections

for modified electrical system.

b. Procurement Assistance,

i. Preparation of purchase specifications of new 8

MVA, 11/3.3kV transformer.

ii. Preparation of specifications for the

replacement /modification of,

I. 11kV switchgear Panel P06 at TG-5 bus.

II. 3.3kV switchgear Panel LC-5 - P20 at LC-5

bus.

iii. Preparation of purchase specifications for the

new cables.

iv. Preparation of purchase specifications for loose

protection relays for this circuit.

of 24

SR. NO.


c. Detail Design Engineering :

i. Carry out power and control cable sizing.

ii. Preparation of power cable and control cable

schedule.

iii. Preparation of control cable interconnection

diagram.

iv. Modification of Relay setting and Relay

co-ordination for the modified system.

v. Preparation of Transformer Layout drawing.

vi. Review of Vendors Technical offer, Discussion

and correspondence with vendor; carry out

tender analysis, offer evaluation and forward

purchase recommendation.

vii. Review Vendor drawings for the modified 11kV

switchgear and 3.3kV switchgear.

51.0 PT IndoRama Polychem Indonesia (IPCI)

Carrying out Power System Study of Electrical

Distribution System of CP-4.


a. Review of existing protection application, identify

deficiencies if any in protection application and

suggest missing protection. Provide functional

specification for additional relays suggested.

b. Carrying out Short Circuit Studies at various location

in electrical distribution system for normal operating

condition to identify the Phase to Phase and Phase to

Ground Fault Current.

c. Carry out,

i. Phase Fault Relay Co-ordination and

of 24

SR. NO.


ii. Ground Fault Relay Co-ordination.

d. Work out Unit Protection settings for,

i. Generators,

ii. Transformers,

iii. MV Motors,

iv. LV Motors.

e. Load Flow study.

f. Review of Grounding Method and its operating

practice.

g. Engineering Grid Islanding & Load Shedding Scheme

for continuous parallel operation.

50.0 The Madras Aluminum Co. Ltd., Salem, T.N.

Feasibility study for Hookup of new 8.4 MVA Generator

on 6.6 kV ST-2 Switchgear.


a. Preparation of SLD with Control, Protection and

Metering system to indicate the hookup of new

generator

b. Review of Grounding of new Generator and ST-2

transformer on 6.6 kV side.

c. To check the rating of ST-2 transformer and its

Vector group for parallel operation of new generator

and ST-2 transformer.

d. Preparation of phasor diagram to verify the vector

group for parallel operation.

e. Checking the feasibility of synchronizing new

generator and ST-2 transformer at 6.6 kV voltage

level.

of 24

SR. NO.


f. Short Circuit Study,

i. To verify the device capability

ii. To check the feasibility of paralleling ST-1 and

ST-2 transformer.

49.0 IOT Infrastructure & Energy Services Ltd., Mumbai

Detail Engineering Services for Electrical and

Instrumentation System. 1 x 300 MW Power Plant for

Maruti Clean Coal & Power Ltd.

a. Preparation of Electrical System single Line Diagram

and Instrumentation PID.

b. Procurement Services: This includes,

i. Preparation and submission of Electrical and

Instrumentation equipment specification for CHP

plant.

ii. Review of the technical offers received from

vendors and submission of technical tender

analysis and recommendations.

c. Carrying out Detail Design Engineering related to,

i. Preparation of single line diagram including

protection system and Instrumentation PID.

ii. Electrical equipment layout engineering.

iii. Power and control Cable engineering.

iv. Earthing system engineering.

v. Lighting system engineering.

vi. Lightning protection engineering.

vii. Interconnection diagrams for control function.

viii. Protection system setting and coordination.

ix. Instrumentation system:

Preparation and submission of IO list.

of 24

SR. NO.


Preparation and submission of instrumentation

logic.

Preparation and submission of interconnection

wiring diagram.

d. The review of Vendor Drawings.

48.0 ACC Limited, Kymore Cement Works

Design and Engineering Services for 132kV switchyard

modifications for export of power of ACC, Kymore.

a. System Study of,

i. Existing power distribution scheme of operation

of TG set.

ii. Existing Operation of export of power through

TG sets and existing transformer.

iii. Existing Scheme of load control with Grid and

Load Sharing of TG sets without Grid.

iv. Existing Grid Protection Scheme for Grid failures

and Load Shedding Scheme.

b. Design Engineering Scheme for,

i. Export of power after replacement of existing

8/10MVA, 132/6.6kV transformer by 31.5MVA,

132/11kV transformer.

ii. Synchronizing TG4, TG5 each of 25MW rating

and 132kV Grid at 11kV Bus level through

existing or new synchronizing panel.

iii. Load Control Sharing between TG4, TG5 and

Grid feeder and Load Shedding.

c. Procurement Assistance of Various Equipments.

d. Detail Design Engineering for ,

i. Preparation of layout drawings for various

of 24

SR. NO.


equipments.

ii. Preparation of cable tray routing and trench

routing.

iii. Carrying out power and control cable sizing and

preparation of power and control cable schedule.

iv. Submission of as built drawings.

47.0 ACC - Holcim - Ambuja, (Bhatapara Cement Plant Unit)

Design, Procurement, providing Consultancy services for

extension of 132kV switchyard bay for Transformer.

46.0 Punj Lloyd PTE Ltd. / PT. Makmur Sejahtera Wisesa (MSW), Indonesia

Providing Electrical Engineering Consultancy Services for

2 X 30MW, Coal fired Power Plant project at Tanjung -

Tabalong, Indonesia.

45.0 Deepak Fertilizers & Petrochemical Corporation Ltd., Taloja April 2013

a. Engineering consultancy services for Retrofitting of

AEI make protective relays in IPA plant.

b. Engineering consultancy services for Retrofitting of UE

make protective relays in Ammonia plant.

44.0 ACC Limited Kymore Cement Works., Katni (M.P.), August 2012

Design and Engineering Services for new addition of

7 MW Waste Heat Recovery System (WHRS) Generator

at ACC Kymore.


a. Preparation of conceptual SLD with control and

protection system for 7MW WHRS generator i.e.

from 7MW Generator to 11kV Incoming Switchgear

panel.

b. Feasibility study to identify the power connection of

7MW WHRS Generator on HV Bus. This will include,

i. To check the availability to suitable switchgear

of 24

SR. NO.


panel technically at 11kV HV switchboard.

ii. Identify the breaker ratings, protection system of

the feeder panel or specify new feeder

requirement.

c. Short Circuit study (Device Duty) shall be carried out

to check acceptability of the existing switchgear

d. If short circuit levels are above the present

switchgear ratings, examine and suggest the

alternative of suitable “current limiting device” to

limit the fault level.

43.0 Siemens - Hazira LNG Pvt. Ltd., Surat, July 2012

Power System Study and Consultancy Services for LNG

Hazira Project.

a. Engineering of grid Islanding and Load Shedding

scheme & Engineering of Load sharing and

synchronizing scheme.

b. Procurement specification for engineering scheme.

c. Study and finalizing reactive power requirement and

equipment rating specifications.

d. Power system study. This will include

i. Data compilation

ii. Electrical system modeling on ETAP software,

iii. Load flow study on ETAP software & lump load

and

iv. Transient Stability Study.

e. Balance Engineering Activities such as,

i. Technical tender analysis and purchase

recommendation for the procurement of

equipment.

of 24

SR. NO.


ii. Vendor drawing review for equipments on order

and

iii. Preparation of control cable schedules

and interconnection schedules.

42.0 Deepak Fertilizers & Petro Chemicals Corporation Ltd., Taloja

Consultancy services for carrying out Feasibility study of

connecting new Generator to 3.3 kV ANP Bus.

Scope of work includes,

a. Short Circuit Study.

b. To develop operating philosophy of the plant.

c. Voltage dip study.

d. Preparation of functional specification of Generator,

Transformer and switchgear neutral grounding

resistor etc.

e. Technical Engineering document review.

f. Review logic of Load Shedding scheme and power

management system.

g. Relay setting and Relay co-ordination.

h. Detail engineering for Generator Transformer.

41.0 Ultratech Cement Ltd. (GCW Cement Plant) Kovaya, Gujarat

Consultancy Service for 1 No. 220kV switchyard bay

addition for Transformer.

This includes,

a. Preparation of design basis report and the summary.

b. Preparation of Key Single Line Diagram and detail

SLD for the proposed bay.

c. Preparation of Plan drawings for 220 kV Bay.

d. Carry out Basic design, finalizing equipment rating,

procurement assistance by providing

i. Purchase specifications on turn key basis.

of 24

SR. NO.


ii. Techno commercial scrutiny of vendors offer.

iii. Review of Vendor design and Vendor drawing of

all switchyard equipments.

40.0 British Gas Exploration and Production India Ltd., Tapti October 2011

The scope of work shall include following activities,

a. Preparation for engineering scheme for

synchronizing TPP TG/EG and TR-110 Feeder & for

export of Emergency power of 200 KW, from TCPP

to TPP platform using the TCPP Diesel Generator &

Vise Versa.

b. Preparation of specification of equipment, data

sheet.

c. Preparation of report for the proposed modification

with revised operating philosophy.

d. Preparation of cable schedule, inter-connection

diagrams.

e. Preparation of ITP (Inspection Test Procedure) for

commissioning the system.

f. Preparation of Single Line Diagrams, preparation of

data compilation report by modeling TPP & TCPP

Electrical System on ETAP.

g. Carrying out following power system studies for

TCPP & TPP Electrical Distribution System.

i. Load Flow Study.

ii. Short circuit studies (Phase to phase and phase

to earth fault calculation to check the fault

level).

iii. Relay Setting, Relay Co-ordination for and

Earth fault relay and

of 24

SR. NO.


iv. Unit protection settings for Generator,

Transformer and Motors

39.0 Ultratech Cement Ltd. Kovaya, Gujarat

Consultancy services for carrying out 66 kV switchyard

modification and system study. This includes,

a. To check the feasibility and rating of 66 kV

additional bus coupler bay.

b. Detail Engineering and purchase specification of

66 kV equipments.

c. To prepare drawing for electrical inspector approval.

38.0 Gujarat Ambuja Cements Ltd., Bhatapara (Cement Mill-3 Close Circuit and VRPM)

Engineering Services for Cement Plant (CM-3) at

Bhatapara Project, Chhatisgarh. This includes

engineering for,

a. Cable Engineering

b. Earthing system Design

c. Review of drawings

d. Preparation of drawings

e. Lighting system design

f. LBS interconnection and Cable schedule

g. Relay Setting and Relay co-ordination for new plant

electrical system only.

37.0 Gujarat Ambuja Cements Ltd., Bhatapara (Cement Mill - 2 Close Circuit and VRPM)

Engineering Services for Cement Plant (CM-2) at

Bhatapara Project, Chhatisgarh. This includes

engineering for,


b. Earthing system Design




of 24

SR. NO.


f. LBS interconnection and Cable schedule

g. Relay Setting and Relay co-ordination for new plant


36.0 Madras Aluminium Co. Ltd. Salem

Engineering services for,

a. Modification of AC and DC Schematic Diagram to

incorporate

i. MICOM P543 protection Relay.

ii. MICOM P127 Protection Relay.

b. Recommendation for hooking up the required

protections available in MICOM P543 and MICOM

P127 at both the ends of the line based on the

application

c. Working out protection relay setting and relay

configuration for TNEB Line-3 protection for

proposed operating condition.

35.0 Gujarat Ambuja Cements Ltd., Nalagarh Unit

Engineering Services for Cement Grinding Unit at

Nalagarh

The scope includes,

a. Relay Setting and co-ordination for plant.

b. Requirement of cable trays & quantity of steel.

c. Preparation of single line diagram.

d. Cable Engineering

e. Review for Drawings

f. Preparation of Drawings

g. Lighting system design

34.0 Ruby Mills Limited., Mumbai.

Consultancy services for electrical distribution system for

a new Textile Process House at Khopoli. This includes,

a. Preparation of Detail Single Line Diagram, indicating

of 24

SR. NO.


protections, metering and rating of equipments etc.

b. Preparation of purchase specifications.

c. Detail Design Engineering for,

i. Lighting system design.

ii. Earthing system design.

iii. Equipment layout drawings.

iv. Cable tray / trench layout.

v. Cable schedule and interconnection diagram.

d. Preparation of drawings / documents for statutory

approval.

33.0 Gujarat Ambuja Cements Ltd., Rauri

Engineering Services for Cement Plant at Rauri Project,

Himachal Pradesh. This includes engineering for,


b. Earthing system design.




f. Relay Setting and Relay co-ordination for new plant


32.0 Madras Aluminium Co. Ltd. Salem

Carrying out re-engineering of 2 Nos. 110 kV TNEB Line-

1 and Line-2 protection relays with Areva make Micom

P543 line management relay.

31.0 Gujarat Ambuja Cements Ltd., Dadri, U.P.

Engineering services for local control station. This

includes engineering for,

a. Location of Local Control stations near motors.

b. Location of control junctions boxes (J. B.) of each

floor of plant building.

c. Location of local central JB at each building.

of 24

SR. NO.


d. Location of central JB at USS building.

e. Control cables interconnection at USS building.

i. Local control station at local JB.

ii. Local JB to central JB plant building.

iii. Central JB plant building to USS building.

iv. USS building JB to MCC marshalling panel.

f. Preparation of control cable schedule.

30.0 Gujarat Ambuja Cements Ltd., Bhatapara Unit Line-2 Raipur, Chattisgarh. (Clinkerization Unit 2.5 MTpa)

Engineering Services for Cement Plant at Bhatapara

Project, Chhatisgarh. This includes engineering for,


b. Earthing System Design






29.0 Gujarat Ambuja Cement Ltd. Bhatapara, Raipur Chattisgarh. (Power Plant)

Engineering Services for Power Plant (15MW & 33MW) at

Bhatapara, Chhatisgarh. This includes engineering for,


b. Earthing System Design






28.0 GACL, Dadri, U.P. (Grinding Unit 1.25 MTpa)

Engineering of Cement Grinding Unit at Dadri, Uttar

Pradesh.

The scope includes,

of 24

SR. NO.



b. Relay Setting and co-ordination.

c. Cable Engineering.

d. Requirement of cable trays & quantity of steel.

e. Preparation of single line diagram.

27.0 Indo Rama Synthetics (I) Ltd., Nagpur.

Consultancy Services for detail engineering for

replacement of 25 MVA Transformer with 50 MVA

Transformer at our Plant Butibori, Nagpur. This includes,

a. Review the specifications prepared by Indorama for

50 MVA transformer.

b. Preparation of Transformer layout, foundation

drawing, Soak pit drawing, Cable schedule and Inter

connection diagram.

c. Review and study the adequacy of existing system

equipment

d. Design of protection system for 50 MVA transformer.

26.0 The Associated Cement Companies Ltd. Kymore Cement Works, M.P.

Re-designing of 132kV Switchyard System. This includes,

a. Preparation of Detail Single Line Diagram.

b. Preparation of procurement specification.

c. Preparation of 132kV switchyard layout drawing.

d. Tender analysis of vendor offers and vendor

drawings.

e. Relay setting & Relay Co-ordination for 132kV

switchyard electrical system.

25.0 The Associated Cement Companies Ltd. Kymore Cement Works, M.P.

Design Engineering Parallel operation of MPEB 33kV

power with 25MW, TG-5. This includes,

a. Review of protection for parallel operation.

b. Review of existing synchronizing scheme.

of 24

SR. NO.


c. Prepare specification for new hardware.

24.0 Hindalco Industries Ltd., Unit : Birla Copper, Dahej.

Design, engineering modification in existing engineering

drawings, schematic and control diagram for

replacement of PPX relay to MICOM relay.

23.0 Grasim Industries Ltd., Nagda

Power System Design for the electrical system including :

a. Review and approval of detail single line diagram of

proposed 30MW TG set electrical distribution system.

b. Review and approval of hookup of new 30 MW TG

set with existing electrical system.

c. Suggest scheme for load sharing with existing TG

sets

d. Suggest better alternative if any.

22.0 Emami Paper Mills Ltd., Balasore, Orissa.

Review of detail design engineering of 1 x 15 MW

Captive Power Plant Electrical System and 132 kV

Switchyard.

21.0 Gujarat Ambuja Cement Ltd. Roorkee, Uttaranchal. (Grinding Unit 1.25 MTpa)

Power system study for electrical distribution system

including :



c. Cable Sizing.



20.0 Gujarat Ambuja Cement Ltd. Roorkee, Uttaranchal. (Grinding Unit 1.25 MTpa)


including :



c. Cable Sizing.

of 24

SR. NO.




19.0 Gujarat Ambuja Cement Ltd. Farakka West Bengal. (Grinding Unit 1.25 MTpa)


including :



c. Cable Sizing.



18.0 Saudi Basic Industries Corporation (SABIC), Saudi Arabia

Detail engineering for upgradation of existing UPS

system for IT department. This includes,

a. Study / evaluate existing UPS Power System network

and suggest rating of new UPS.

b. Preparation of technical specifications, drawings for

the new equipments.

c. Preparation of drawings for layout of equipment,

cable tray layouts etc.

d. Preparation of specifications for engineering

package.

17.0 Atul Ltd., Valsad

Detail engineering for modification required for hookup

of 4 MW TG set.

16.0 Hindustan Petroleum Corp. Ltd., Mahul

Detail engineering for modification of existing distribution

system, replacement of M. V. switchgears, substation

equipment layouts, and modification of existing

protection schemes etc.

15.0 Hindustan Lever Ltd., Sumerpur

Preparation of detailed single line diagram of existing

electrical system.

of 24

SR. NO.


14.0 Madras Aluminiun Co. Ltd.

Detail engineering for retrofit of Numerical Protection

Relays in place of electromechanical relays for Generator

Protection and Generator Transformer Protection. This

includes the modification of existing protection schemes.

13.0 Atul Ltd.

Detail engineering for the modification of existing grid

islanding scheme panels.

12.0 The Bombay Dyeing and Manufacturing Co. Ltd., Patalganga

Feasibility study to check the adequacy of existing 220kV

system equipment to take care of start up and running

loads considering the existing load and additional load.

11.0 Indo Bharat Rayon Ltd., Indonesia.

Rationalization of Electrical Power Distribution, Power.

Evacuation and Power System Studies. This includes:

a. Rationalization of Electrical Power Distribution.

b. Detail Engineering of Power Evacuation for New

2 x 10.8 MW CPP.

c. Rationalization of Power Source Grounding System.

d. Carryout Transient Stability Studies, Load Flow

Studies, Short Circuit Studies and Relay Co-

ordination Studies.

e. Design and Engineering of Grid Islanding Scheme

and Post Islanding Load Shedding Schemes.

10.0 Gujarat Ambuja Cement Ltd., Ropar.

Detail engineering and consultancy services for electrical

System of 2 x 15 MW Captive Power Plants.

9.0 Birla Copper Ltd., Dahej

1 x 12.5 MW , 1 x 2.85 MW Co-generation Power Plant

a. Complete Design and Detail Engineering Services

b. Testing-commissioning of Power Plant and its

electrical system equipments.

of 24

SR. NO.


8.0 Melco India Pvt.Ltd., Faridabad, New Delhi

2 x 210 MW, Panipat Thermal Power Plant Ash handling

plant Electrical system review, Design and engineering.

7.0 Deepak Fertilizers & Petro Chemicals Corpn. Ltd., Taloja

DG Power Plant feasibility report Under suspension,

awaiting MSEB's approval

6.0 Thirumalai Chemicals Ltd., Ranipet Consultancy Services

2 x 1000 kVA DG Power Plant Complete design and detail

engineering services.

5.0 Thirumalai Chemicals Sdn. Bhd., Malaysia Consultancy & Commissioning services

Detail engineering and Testing Commissioning for 7MW

T.G. Set.

4.0 Gujarat State Fertilizers & Chemicals Ltd., Vododara Consultancy & Commissioning Services

a. Testing - Commissioning of Co-Generation plant with

its electrical system.

i. Phase - I , 15MW T.G. Set.

ii. Phase - I I , 25MW T.G. Set.

iii. Phase - I I I , 32+20MW Combined Cycle Power

Plant.

b. Review of design engineering & Testing -

Commissioning of 25MW T. G. Set and its electrical

system equipments of Ammonia - IV Plant.

3.0 Grasim Industries Ltd., Nagda Electrical System Studies and Commissioning Services.

1 x 40MW Co-Generation Power Plant.

a. Relay setting and Co-ordination of Power Plant &

electrical Protection system.

b. Testing - Commissioning of power plant & its


of 24

SR. NO.


2.0 Birla Cellulosic, Kosamba Consultancy, Commissioning and supervision Services

2 x 15MW Co-Generation Power Plant.

a. Detail design engineering.

b. Site-erection supervision

c. Testing - Commissioning of power plant and its


1.0 Atul Ltd., Balsar Consultancy & Commissioning Services

1 x 18MW Co-Generation Power Plant

a. Complete design and detail engineering Services.

b. Testing - Commissioning of power plant & its


PROJECTS WITH PARTNERS BHAGWATI POWER PLANT CONSULTANTS

SR. NO.


1.0 Ambuja Cement Eastern Ltd. Turnkey Consultancy services Elect. + Mech. + Civil +Instrumentation with BPPC

1 x 20MW Thermal Power Plant.

Detail design engineering including

a. Unit Sizing.

b. Hook up system design.

c. Grounding system design.

2.0 Vikram Cement., Khor. with BPPC

Feasibility Study for 2x20MW Thermal Power Plant.

3.0 Eurotex Industries & Export Ltd., Kolhapur. Turnkey Consultancy services Elect. + Mech. + Civil + Instrumentation

(1 x 3MW) + (1 x 4MW ) D. G. Power Plant.

a. Detail engineering,

b. Site erection supervision,

c. Testing - Commissioning.

of 24

SR. NO.


4.0 Gujarat Sidhee Cement Ltd., Veraval Turnkey Consultancy services Elect. + Mech. + Civil + Instrumentation with BPPC

3 x 6 MW Power Plant.

power-linker reference list : electrical · pdf filegiven below is a list of electrical...

Documents