power supplies - tresco lighting · pdf fileall parts included with ... • th e 12w power...

135

Pow

er S

uppl

ies

12VD

C C

OM

PON

ENTS

1-800-227-1171 | trescolighting.com136

Power Supplies

12V DC power supply is equipped with a mounting block that allows for easy snap-in connections and includes a standard 110/120V cord and plug.

Features:

One mounting block included. Add mounting blocks

to utilize the full capacity of the power supply.

Short circuit protection*

12V DC output, constant voltage

Overcurrent protection

Overload protection*

RFI protection

50,000 hour life supply

Dimmable on trailing edge (12V side)

Class 2 or LPS

Universal System allows you to mix all 12V lights

6 in.152 mm

6 ft.1.8 m

Mounting Block

6 in.152 mm

Hole Size, if Needed:5/8 in.16 mm


114 mm4.5 in.

51 mm2 in.

u042310

3/4 in.19 mm

1-1/16 in.27 mm

Indicator Light

3-5/16 in.84 mm

1-1/4 in.32 mm

6 in.152 mm

6 ft.1.8 m

Mounting Block

6 in.152 mm



1 in.25 mm

1-5/8 in.41 mm3/4 in.

19 mm

1-1/16 in.27 mm

3-5/16 in.84 mm

3-3/4 in.95 mm

Commercial Grade Power Supplies

* Automatic reset (no fuses)All parts included with purchase of power supply.

Cord Mounting Block

6 in.152 mm

6 ft.1.8 m

Mounting Block

6 in.152 mm



1 in.25 mm

1-5/8 in.41 mm3/4 in.

19 mm

1-1/16 in.27 mm

3-5/16 in.84 mm

3-3/4 in.95 mm

Dimmable on trailing edge (12V side). Mounting block and power cord are included.Power supply specifications are subject to change.

* No resistor necessary - works with all Tresco 12VDC LED fixtures.

I

Worldwide use 100V-240V

UK EU

EU

Other cord sets available upon request.

6 in.152 mm

6 ft.1.8 m

Mounting Block

6 in.152 mm



1-1/4 in.31.2 mm

1-11/16 in.43 mm3/4 in.

19 mm

1-1/16 in.27 mm

3-5/16 in.84 mm

4-1/4 in.107 mm

6 in.152 mm

6 ft.1.8 m

Mounting Block

6 in.152 mm



1-1/4 in.31.2 mm

1-11/16 in.43 mm3/4 in.

19 mm

1-1/16 in.27 mm

3-5/16 in.84 mm

4-1/4 in.107 mm

18W

114 mm4-1/2 in.4-11/32 in.

110 mm

6 in.152 mm

60W 6 in.152 mm

6 ft.1.8 m

Mounting Block

6 in.152 mm



4.5 in.114 mm

2-3/32 in.53 mm

u042310

3/4 in.19 mm

1-1/16 in.27 mm

Indicator Light

3-5/16 in.84 mm

1-5/32 in.29.5 mm

Part # Description

L-DC-ELT18-CON-1 18W 12VDC Power Supply w/6 Snap Mounting Block*

L-DC-ELT60-CON-1 60W 12VDC Power Supply w/6 Snap Mounting Block*

L-TRANS-MNT-BL-1 Extra 6-Snap Mounting Block

L-DCT-EUPKT-BL-1 72” (1.8 m ) EU Power Cord, Black

L-DCT-UKPKT-BL-1 72” (1.8 m ) UK Power Cord, Black

I

1-800-227-1171 | trescolighting.com 137

LED Wall DimmerLED Power Supply 12 VDC

Mounting Block

Line Voltage Input Cord

Hardwire Box

LED Wall Dimmer(Optional)

Power Supply 12VDC

Mounting Block

• •

– +

• •

N

L

• •

– +

•

•

– +

INPUT OUTPUT

Neutral (white wire)

Install Wall Dimmer on input (line voltage) side of Power Supply

Ground (green wire)

Line (black wire)

INPUT

OUTPUT 12 VDC

12VDC+

INPUT >

OUTPUT >

Tresco Lighting by Rev-A-Shelf1240 0 Earl Jones WayLouisville, KY 40299

Tel: 800-227 -1171Fax: 502-491-221 5

Email: [email protected] Web: www .trescolighting.com

Part Nos.: LED 12VDC Power Supply (12W) .......... L -DCE12D-CONLED 12VDC Power Supply (50W) .......... L -DCE50D-CON

For best operation, use LED-compatible wall dimmers.

Save these instructions for future reference.For technical assistance, call 1-800-227-1171

Installation Instructions Hardwire LED Power Supplies

Class 2 • Dimmable 12W & 50W 12VDC

I-DCE-0116

IMPORTANT SAFETY INSTRUCTIONSCAUTION: To reduce the risk of �re, electric shock, or injury to persons:Read all instructions before installing system.Before beginning installation, be sure power is turned OFF to the power supply and light system.

• Th e 1 2W Power Supply operates on line voltage 120 VAC. Th e 50W Power Supply operates on line voltage 100-240 VAC.

Warning: Th e Power Supply is to be mounted and wired in accordance with Article 450 of the National Electric Code (NEC) . The Power Supply must be installed in a well-ventilated area free from explosive gases and vapors. Failure to install th e Power Supply and light �xture in compliance with applicable codes and regulations may cause serious personal injury, death and/or major property damage.

• The hardwired installation of the Power Supply should only beperformed by a quali�ed electrician .

• Do not conceal the line voltage input cord or Power Supply inside awall, ceiling, sof�t, or similar permanent structure, unless consultinga licensed electrician. This requirement does not apply to the wiringbetween the Power Supply and the cabinet light system .

------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------Note: Mounting Block and Line Voltage Input Cord are included with each Power Supply.

Technical Speci�cationsPart No. L- DCE12D-CON L- DCE50D-CON

Input Voltage Range 120 V AC 10 0-240 VAC

AC F requency 50-60Hz 50-60Hz

Input Current 0.18A max 0.58A max

Output Mode Constant voltage Constant voltage

Output Cur rent 1.0 A 4.16 A

On L oad Voltage 12V 12V

No L oad Voltage 12V 12V

Output Power 12W max 50W max

Power F actor >0.90 >0.90

Ef�ciency >80% >80%

Dimensions 121 x 44 x 25 mm 138 x 73 x 33 mm (4-3/4 x 1-3/4 x 1") (5-7/16 x 2-7/8 x 1-5/16")

Weight 175g (6.2 oz) 340g (12.0 oz)

Minimum Load No minimum required No minimum required

War ranty 3 years 3 years

• Use only insulated staples or plastic ties to secure ALL loose cords.

• Route and secure cords so that they will not be pinched or damagedwhen the cabinet is pushed to the wall.

• Use only LED-compatible Wall Dimme rs with LED Power Supplies. Forbest operation, use a Dimmer w ith an adjustable low-end dial such asthe Lutron ® C .L Series: L-CTCL-153P-WH or L-DVCL-153P-WH.

If you are unsure of dimmer compatibility, call 1 -800-277-1711.

• Only install the Wall Dimme r on the input (line voltage) side of the PowerSupply .

Do not add a plug-in to input wires and attempt to dim a receptacle. This can cause unwanted lighting e�ects (such as �ickering), is dangerous, and against NEC in certain applications.

• Do not attempt to ground this unit. It is double-insulated.

• This unit can be mounted in any orientation, horizontal or vertical.

• Not intended to be used in damp locations or outdoor areas.

• I f any modi�cation is made to the Power Supply , it will invalidate thewarranty and may render the product unsafe.

!

LED DC Power Supply (12W) L-DCE12D-CON

LED DC Power Supply (50W) L-DCE50D-CON

LED Power Supply 1 2W • L-DCE12D-CON 010816

1. 8 m6 ft.

121 mm4-3/4 in.

44 mm1-3/4 in.

25 mm1 in.

152 mm6 in.

1. 8 m6 ft.

138 mm5-7/16 in.

73 mm2-7/8 in.

33 mm1-5/16 in.

152 mm6 in.

LED P ower Supply 50W • L-DCE50D-CON 010816

Power Supplies

Hardwire 12V DC Power Supply

Features:

12W

40 mm1-9/16 in.

85 mm3-3/8 in.

5 ft.1.5 m

Mounting Block

21 mm3/4 in.

6 in.152 mm

3-5/16 in.84 mm

6 in.152 mm

Features:





Class 2

* Automatic reset (no fuses)All parts included with purchase of power supply.* No resistor necessary - works with all Tresco 12VDC LED fixtures.

Wall Dimmable LED Hardwire Power Supply

Compatible Tresco WallDimmers on next page.

Part # Description

L-DC-ELT12-CON-1 12W 12VDC Power Supply w/6 Snap Mounting Block

Dimmable by standard LED wall dimmers

Available in 12W and 50W models

Electronic units are lower profile and generate less

heat than magnetic transformers

Quiet operation (no humming)

Works with all Tresco 12VDC dimmable LED fixtures*

One 6-snap mounting block included

No minimum load requirements

Class 2 with short circuit and automatic reset

Part # Description

L-DCE12D-CON-1 12VDC 12W Dimmable LED Power Supply

L-DCE50D-CON-1 12VDC 50W Dimmable LED Power Supply

* No resistor necessary - works with all Tresco 12VDC dimmable LED fixtures.

L-DCE12D-CON-1

L-DCE50D-CON-1


Power Supplies All product dimensions and specifications are subject to change without prior notice.

Part # Description

L-DVCL-153P-WH-1 Lutron Diva® C•L™ Dimmer w/out plate

L-CTCL-153P-WH-1 Lutron Skylark Contour C•L™ Dimmer w/out plate

Mounting block and power cord are included with each power supply.Dimmable on trailing edge (12V side).

EquiLine Power Supplies

15W 6W

3-5/16 in.84 mm

3 in.76 mm

1-1/4 in.32 mm

1-5/8 in. wide41 mm wide

2 -3/4 in.70 mm

1-1/2 in.38 mm

1-1/2 in. wide38 mm wide

1-11/16 in.43 mm

10’

10’

120V LED Wall DimmersLutron Diva® C•L™

Dimmer

Lutron Skylark Contour C•L™

Dimmer

Large paddle switch with a captive linear-slide dimmer for a standard designer wallplate opening

Preset dimmer

Offers more reliable dimming performance over standard dimmers

HED™ technology with advanced dimming circuitry designed for compatibility with most high-efficiency light bulbs

Low-end adjustment dial

Lutron Diva® C•L™ Dimmer

On/off rocker switch with a captive linear-slide dimmer for a standard designer wallplate opening

Switch returns light to preset light level

Offers more reliable dimming performance over standard dimmers

HED™ technology with advanced dimming circuitry designed for compatibility with most high-efficiency light bulbs

Low-end adjustment dial

Lutron Skylark Contour C•L™ Dimmer

Compatible with Tresco 12VDC Wall Dimmable Power

Supplies (previous page)

Features:





Class 2 or LPS

* Automatic reset (no fuses)

Part # Description

L-DC-ELT6WP-CON-1 6W 12VDC Wall Mount Power Supply w/3 Snap Block*

L-DC-ELT15WP-CON-1 15W 12VDC Wall Mount Power Supply w/6 Snap Block*

139

Con

trol

lers

12VD

C C

OM

PON

ENTS


Controllers

FREEDiM SERIES WIRELESS CONTROLLERS

FREEDiM Series Universal Receiver

Part # Description

L-WLD-1REC-1 12VDC 60W Universal FREEDiM Series Receiver

FreeDim 2-Zone Remote

5 150mm

3 97mm

1 ” 39mm

” 16mm

1 ” 35mm

1 ½” 13mm

1 ½” 13mm

” 16mm

Housing

S1 S2

S3 S4

Installation InstructionsFREEDiM 3-Zone Remote Dimmer

12VDC 60W Capacity

PROGRAMMINGPerform this exercise BEFORE permanently installing your system1. Disconnect Mounting Block from 12V DC Tresco power supply. Connect Receiver to Tresco power supply by locating the input wire to the receiver and snapping the male AMP connector to female AMP connector located on output wire of the power supply (See Figure 2). To use multiple receivers on one power supply, connect the input wire of the Mounting Block to the power supply output and then plug the receivers into the Mounting Block.

2. Remove the plastic pull-tab from the battery compartment on the back of the remote.

3. Plug desired 12V DC LED lights into the Mounting Block(s).

4. Plug polarized 2-prong end of Tresco 12V DC power supply wire into 120V receptacle. If receptacle is operated by on/off switch, turn switch on after plugging power supply in.

5. Power on the 3-Zone Remote Dimmer.6. In order for each Receiver to know what Zone it belongs to, you will need to “pair” it to the zone you wish to use: press (do not hold) the Learning Key on the Receiver, then immediately press (do not hold) the | (On) or O (Off) button of the corresponding Zone (#’s 1-3) you wish to use (See Figure 1). Connected LED lights will blink confirming successful programming.

7. Repeat step 6 with any additional Receivers or Remotes that you want programmed. Each Receiver can be controlled by up to 8 different Remotes. Each Zone can be programmed to an unlimited amount of Receivers.

CLEARING A RECEIVER MEMORYWith Remote/Lights turned On, hold down the Learning Button on the Receiver until the lights flash, confirming the Receiver memory has been cleared.

SETTING A SCENESet all Zones to the desired light level. Hold down the desired Scene Save Button (#’s S1 - S6) until the lights flash, confirming the Scene has been saved.

IMPORTANT SAFETY INSTRUCTIONSCAUTION: To reduce the risk of fire, electric shock, or injury to persons:• Route and secure cords so they will not be pinched or damaged when the cabinet is pushed to the wall.• Use only insulated staples or plastic ties to secure ALL loose cords.• 12VDC Class 2 or LPS power supply only• Max 60W 12VDC 5AMP output• Use only in dry locations. Not for use where exposed to the weather• Not intended for recessed installation in ceilings or soffits• A licensed electrician should be consulted for wiring through ceilings, soffits, or walls• All wiring must follow NEC regulations.

Save these instructions for future referenceFor technical assistance: 1-800-227-1171

READ ALL INSTRUCTIONS BEFORE INSTALLING SYSTEM.Before beginning installation, be sure power is turned OFF to light system.

3-1/4” (82.5 mm)

1-3/8” (35 mm)

7/8” (22 mm)

4” (102 mm)

WLDIM-1REC

Learning Key

Figure 3

Outpu

t Wire

Inpu

t Wire

Female AMP®

Connector

Male AMP®

Connector

Tresco Lighting by Rev-A-Shelf12400 Earl Jones WayLouisville, KY 40299

Tel: 800-227-1171Fax: 502-491-2215

Email: [email protected]: www.trescolighting.com

I-WLD-3RMT-BL-0116

Hold to save the scene, click to call up the saved

Figure 1

All lights: ON/UP

Indicator Light

Remote Specifications: P/N: L-WLD-3RMT-BLOperating Voltage: 3V CR2032Working Frequency: 915 MHzRF Remote Distance: 20 m (65 ft.)

Receiver Specifications: P/N: L-WLD-1RECInput Voltage: 12VDCOutput Voltage: 12V DCMax-Output Load: 5A, 60WDimming Range: 100% - 1%

Figure 2

Mounting Block

Power Supply

Dimmer Receiver

All lights: OFF/DOWNZone 1: ON/UP

Zone 2: ON/UP

Zone 2: ON/UP

Zone 1: OFF/DOWN

Zone 2: OFF/DOWN

Zone 3: OFF/DOWN

60W Capacity

Power failure memory

Multiple receivers can be used on a single power supply orwithin a room to achieve multiple zones of control

Install inline between power supply and lights.

L-WLD-1REC-1Universal FREEDiM Series Receiver

Universal 12VDC Power Supply

Mounting Block12VDC LED Fixture

A single receiver can be programmed to up to 8 different FREEDiM Series remotes/dimmers

Compatible with all four FREEDiM Series

controllers

For video visit:trescolighting.com/videos

Deco Wall Dimmers (page 141)

Mirco Dimmers (page 143)

3 & 6 Zone Remotes (page 144)


Controllers

FREEDiM Series Deco Wall Dimmer

Part # Description

L-WLD-1WAL-**-1 FREEDiM Series Deco Wall Dimmer

2 7/16”61mm

4”103mm

1” 27mm 1 5/16”

33mm

9/16” 13mm

9/16” 13mm

FreeDim Wall Dimmer

Battery Compartment(CR1625/1620)

A single dimmer can be programmed to up to 10 different receivers.

Must have at least one receiver (WLD-1REC-1) to operate

Available in single and 2-zone

Can be programmed to multiple receivers for more lighting control

Black, white, or light almond finish

Fits Decora® style wall plates

65 ft. range of control from dimmer to receiver

Controls all Tresco dimmable low voltage lights

Unlike traditional hardwire dimmers, you can control the same set of lights from multiple Deco Wall Dimmers

Easily remove switch from docking tray to replace batteries or use as a remote dimmer

Can be mounted to standard wall electrical

boxes or to drywall

PATENT PENDING

**Insert BL for Black, WH for White, LA for Light Almond

FREEDiM Series Deco Wall Dimmer - Single Zone

FREEDiM Series Deco Wall Dimmer -Two Zone

Part # Description

L-WLD-2WAL-**-1 FREEDiM Series 2 Zone Deco Wall Dimmer

Also available in 2-Zone:

**Insert BL for Black, WH for White, LA for Light Almond

Part # Description

L-WLD-1REC-1 12VDC 60W Universal FREEDiM Series Receiver

Universal FREEDiM Series Receiver



FREEDiM SERIES WIRELESS CONTROLLERS

FREEDiM Series Micro Dimmer

Part # Description

L-WLD-1RND-BL-1 FREEDiM Series Micro Dimmer, Black

L-WLD-1RND-NI-1 FREEDiM Series Micro Dimmer, Nickel

1-1/2” (38 mm)

5/8” (19 mm)

Integrated Magnet

Battery Compartment(CR2025)

Single zone wireless dimmer

Black or nickel finish

Easy to replace, long life lithium battery

65 ft. range of control from dimmer to receiver


1-1/2” (38 mm)

5/8” (19 mm)

Integrated magnet allows for mounting to refrigerator or

other metallic surfaces

Easy 2 screw installation

Controllers

Part # Description

L-WLD-1REC-1 Universal FREEDiM Series Receiver


A single dimmer can be programmed to up to 10 different receivers. Must have at least one receiver (WLD-1REC-1) to operate



FREEDiM Series 3 & 6 Zone Remotes

Part # Description

L-WLD-3RMT-BL-1 FREEDiM Series 3-Zone remote, Black

L-WLD-6RMT-BL-1 FREEDiM Series 6-Zone Remote, Black

FREEDiM 3-Zone Remote

5 150mm

3 97mm

1 ” 39mm

” 16mm

1 ” 35mm

½” 13mm

½” 13mm

” 16mm

S1 S2

S3 S4

FreeDim 6-Zone Remote

5 ½”140mm

1 ” 48mm

1 ” 17mm

” 17mm

3 97mm

” 22mm

1 ” 35mm

” 16mm

S2S1 S3

S4 S5 S6

21 3

4 5 6

3-Zone 6-Zone

Independent control of 3 or 6 lighting zones (respectively) from single remote

Program additional receivers to separate the lighting in a room into multiple zones that you can control independently

Set brightness levels of all of the zones to a desired level then save as a “scene”

65 ft. range of control from remote to receiver


3-Zone(CR2032)

6-Zone(3 X AAA)

Integrated magnet allows for mounting to refrigerator or

other metallic surfaces

Docking tray can be screw mounted. Remotes attach to

tray magnetically

Controllers

Part # Description

L-WLD-1REC-1 Universal FREEDiM Series Receiver


6-Zone batteries not included Must have at least one receiver (WLD-1REC-1) to operate



Controllers

12VDC Oval Controllers

Proximity Controller Swipe hand across to turn on/off Max wattage: 27WSensor range: 2” (50 mm)Cable input: 79” (2 m)Cable output: 6” (152 mm)Finish: Nickel/Black

Door Sensor Controller Door open, light on; door closed, light off Max wattage: 60WSensor range: 2” (50 mm)Cable input: 79” (2 m)Cable output: 6” (152 mm)Finish: Nickel/Black

Proximity ControllerSwipe hand acrossto turn on/o�Diameter: 13mm (17/32”)Length: 60 mm (2 3/8”)Max Wattage: 27WSensor range: 0 - 80 mm (3 1/8”)Cable input: 2.0 m (79”)Cable output: 152.0 mm (6”)Finish: Nickel / Black

Door Sensor ControllerDoor Open - light on; Door Closed - light o�Diameter: 13mm (17/32”)Length: 60 mm (2 3/8”)Max Wattage: 27WSensor range: 0 - 80 mm (3 1/8”)Cable input: 2.0 m (79”)Cable output: 152.0 mm (6”)Finish: Nickel / Black

Motion ControllerTurns on when humanmotion is detected Diameter: 13mm (17/32”)Length: 60 mm (2 3/8”)Max Wattage: 27WSensor range: 0 - 1500 mmViewing degree: 100ºTime on: 30 secs if no motionCable input: 2.0 m (79”)Cable output: 152.0 mm (6”)Finish: Nickel / Black

Dimmer ControllerTouch on/o� and 0-100% dimming control Diameter: 13mm (17/32”)Length: 60 mm (2 3/8”)Max Wattage: 27WCable input: 2.0 m (79”)Cable output: 152.0 mm (6”)Finish: Nickel / Black*Hold �nger down for dimming

61mm 2-3/8 in.17/32 in. dia.

61mm 2-3/8 in.17/32 in. dia.

61mm 2-3/8 in.17/32 in. dia.

61mm 2-3/8 in.17/32 in. dia.





61mm 2-3/8 in.17/32 in. dia.

61mm 2-3/8 in.17/32 in. dia.

61mm 2-3/8 in.17/32 in. dia.

61mm 2-3/8 in.17/32 in. dia.





61mm 2-3/8 in.17/32 in. dia.

61mm 2-3/8 in.17/32 in. dia.

61mm 2-3/8 in.17/32 in. dia.

61mm 2-3/8 in.17/32 in. dia.





61mm 2-3/8 in.17/32 in. dia.

61mm 2-3/8 in.17/32 in. dia.

61mm 2-3/8 in.17/32 in. dia.

61mm 2-3/8 in.17/32 in. dia.

Proximity Controller

Door SensorController Motion

ControllerDimmerController

**Available in Black (BL) and Nickel (NI) Surface mount plate packaged with each controller.

Motion Controller Turns on when human motion is detected Max wattage: 27WSensor range: 0-5’ (1500 mm)Viewing degree: 100ºTime on: 30 secs if no motionCable input: 79” (2 m)Cable output: 6” (152 mm)Finish: Nickel/Black

Dimmer Controller Touch on/off and 0-100% dimming control Max wattage: 60WCable input: 79” (2 m)Cable output: 6” (152 mm)Finish: Nickel/Black * Hold finger down for dimming

Part # Description

L-LED-OVLTD-** 60W 12VDC Oval Recess/Surface Mnt. Touch Dimmer

L-LED-OVLDS-** 60W 12VDC Oval Recess/Surface Mnt. Door Sensor

L-LED-OVLMS-** 27W 12VDC Oval Recess/Surface Mnt. Motion Sensor

L-LED-OVLPS-** 27W 12VDC Oval Recess/Surface Mnt. Proximity Sensor

L-DB1732-1 17/32” (13.5 mm) Drill Bit for Recess Mount

NOW60W

NOW60W


Controllers

12VDC Remote Control Dimmers

Universal Remote Dimmer Controls up to 5A/60W of LED lighting

Features a built-in memory that recalls the last setting when turned on

Comes with two remote controls (one as a backup)

No line of sight required

Can control multiple dimmers in same room with single remote control for universal dimming

*Recommended not to exceed 3 per roomPlacement of multiple dimmers in a room may be critical for proper function depending on set-up and obstacles.

Remote Control LED Dimmers feature radio-frequency, remote-control dimming to adjust lights from anywhere in the room up to 30’ (9 m). The remote control provides on/off power and dims lights from 100%-1%.

1-5/16 in.33 mm

3-3/16 in.81 mm

2-1/8 in.54 mm

3-3/16 in.81 mm

2-1/4 in.57 mm

1-1/8 in.29 mm

1-5/16 in.33 mm

2-1/4 in.57 mm

1-1/8 in.29 mm

2-1/8 in.54 mm

• + + •• – – •INPUT OUTPUT

Both models of the Remote Control LED Dimmer provide on/off power and dim lights from 100%–1%. The dedicated remote control independently controls one specific dimmer in a room. The Universal Remote Control (U) controls multiple dimmers in a room.

Dedicated Remote Control Dimmer Controls up to 5A/60W of LED lighting

Features a built-in memory that recalls the last setting when turned on

No line of sight required

Comes with two remote controls (one extra, as a backup) that are synchronized to control the same dimmer

Can use multiple independently controlled dimmer in the same room

ALL New by LL 1/23/09, based on IL#9Update caption to “Power Supply” for LED Spec Book 111

17c. Touch On/Off Switch TS2-72 s012309 u020209 u010811

54 mm2-1/8 in.

40 mm1-9/16 in.

21 mm3/4 in.

85 mm3-3/8 in.

Female receptacle can accept up to (3) Power Supply plugs (120V ea.)

5 ft.1.5 m

6 ft.1.8 m

14 in.356 mm

ALL New by LL 1/23/09, based on IL#9Update caption to “Power Supply” for LED Spec Book 111

17c. Touch On/Off Switch TS2-72 s012309 u020209 u010811

54 mm2-1/8 in.

40 mm1-9/16 in.

21 mm3/4 in.

85 mm3-3/8 in.

Female receptacle can accept up to (3) Power Supply plugs (120V ea.)

5 ft.1.5 m

6 ft.1.8 m

14 in.356 mm

On/off switch touch pad attaches to surface with adhesive backing. Power supply plugs into on/off switch.

Touch On/Off Switch

Controls 12V Plug-in Power Supplies

Part # Description

L-LED-DIMRMT-12V8A-1 LED Dedicated Remote Control Dimmer, 12VDC 96W

L-LED-DIMRMT-12V8A-U-1* LED Universal Remote Control Dimmer, 12VDC 96W

Part # Description

L-TS2-72-1 Touch On/Off w/Cord And Touch Pad. Black, 200W


Controllers

12VDC Manual In-Line Rotary Dimmer

4A /48W capacity

100-0% dimming and on/off power

79” (2 m) input lead snaps into power supply mounting block with male AMP® connector

8” (203 mm) output connects to run of light with female AMP® connector

32 mm

64 mm2-1/2 in.

203 mm8 in.

2 m79 in.

25 mm1 in.

1-1/4 in.

203 mm8 in.

2 m79 in.

8 mm5/16 in.

32 mm

64 mm2-1/2 in.

203 mm8 in.

2 m79 in.

25 mm1 in.

1-1/4 in.

203 mm8 in.

2 m79 in.

8 mm5/16 in.

Part # Description

L-LED-DIMCON-BL-1 LED Black Inline Rotary Dimmer, 12VDC 48W

L-LED-DIMCON-WH-1 LED White Inline Rotary Dimmer, 12VDC 48W

Round Switch - 12VFront View

08. Rd Sw - 1 3/31/08 +3

23 mm7/8 in.

17 mm5/8 in.

19 mm3/4 in.

Hole size required - 19mm (3/4 in)

08. Rd Sw - 1 3/31/08 +3

23 mm7/8 in.

17 mm5/8 in.

19 mm3/4 in.

Hole size required - 19mm (3/4 in)

Hole Diam.3/4 in.

19 mm 39 in. 1 m

79 in. 2 m

6 in.152 mm

08B. Rd Sw - detail ( f. TRE )

3/4” (19 mm) hole required.

Available in White & Black

Part # Description

L-RDSW-1M-BL-1 Black Rocker Switch w/ 39” (1 m) Lead, 12VAC/DC

L-RDSW-1M-WH-1 White Rocker Switch w/ 39” (1 m) Lead, 12VAC/DC

L-RDSW-2M-BL-1 Black Rocker Switch w/ 79” (2 m) Lead, 12VAC/DC

L-RDSW-2M-WH-1 White Rocker Switch w/ 79” (2 m) Lead, 12VAC/DC


Controllers

Zone 1

Zone 2

12VDC Wireless Tri-Mitter

Wireless switching or dimming of up to 3 independent 12 volt circuits (zones)

Max. 36W load capacity per zone

Controller uses 3V CR2032 battery

65’ (20 m) range of control from controller to receiver

Touch for on/off control; hold down to cycle dimming 1-100%

Low profile recessed installation

A single receiver can be programmed to up to 9 controllers

Part # Description

L-HTRISET-1 12VDC Tri-Mitter Set (Wireless Controller + Receiver)

L-HTRICON-NI-1 12VDC Tri-Mitter Controller Nickel (Wireless Controller Only)

Hole size 13/4” (44 mm) in

diameter, 1/2” (13 mm) depth

* Power Supplies and mounting block sold separately

Zone 3

Zone 1

Zone 2

Zone 3


INPUT

OUTPUT

Connect up to 3 sensors of the same style to universally control run of lights

Max. 36W load capacity

Soft start on/off function

215/16 in(75 mm)

2 1/8 in(55 mm)

2 1/8 in(55 mm)

5/8 in(15 mm)

71 in(1.8 m)

12 in(305 mm)

12VDC MultiSwitch Station

Controllers

Part # Description

L-HMSMCU-BL-1 12VDC MultiSwitch Station

Push button with dimming function


Touch for on/off control; hold down to cycle dimming 1-100%

Finish: Nickel/Black

Adjustable settings allow for simple on/off operation or dimming + on/off 79 in

(2 m)

1 in(25 mm)

Adjustable Settings Switch

19/32 in

(15 mm)

Hole size 1/2 in (13 mm) in diameter, 1in

(25mm) depth

Touch Dimmer on/off 36W

Part # Description

L-HMSTD-NI-1 12VDC MultiSwitch Touch Dimmer, Nickel

L-HMSTD-BL-1 12VDC MultiSwitch Touch Dimmer, Black

Multiswitch station required for operation


Controllers

Energy saving PIR motion sensor

Viewing degree: 100°

Time on: 10 seconds if no motion

Sensor Range: 0-6.5’ (2 m)


1 3/8 in

(35 mm)

79 in(2 m)

Motion Controller 36WMultiswitch station required for operation

Part # Description

L-HMSMS-NI-1 12VDC MultiSwitch Motion Sensor, Nickel

L-HMSMS-BL-1 12VDC MultiSwitch Motion Sensor, Black

Adjustable settings allow for switch to function as door sensor or proximity controller (hand swipe on/off)

Hand Sensor Range: 0.2-2.0” (5-50 mm)

Door Sensor Range: 0.2-4.7” (Reflection Foil included)

Energy saving auto shut-off turns lights off after 3 minutes when in door sensor mode


Adjustable Settings Switch

1 3/8 in

(35 mm)

5/8 in(15 mm)

79 in(2 m)

Door/Proximity Controller 36WMultiswitch station required for operation

Part # Description

L-HMSHDS-NI-1 12VDC MultiSwitch Door/Proximity Sensor, Nickel

L-HMSHDS-BL-1 12VDC MultiSwitch Door/Proximity Sensor, Black


Roll Switch - 120V

4/29 nr = 5/1

16. Roll Switch – Blk 120V 042908

36 mm1-3/8 in.

23 mm1 in.

17 mm5/8 in.

4/29 nr = 5/1

16. Roll Switch – Blk 120V 042908

36 mm1-3/8 in.

23 mm1 in.

17 mm5/8 in.

Front View Top View

Controls 12V plug-in power supplies.

Attaches to 120V input cords to plug-in power supplies

Part # Description

L-WHITE ROLL SWITCH-1 120V 6A White Roll Switch

L-BLACK ROLL SWITCH-1 120V 6A Black Roll Switch

Controllers

Charging Station

USB charging station that ties into the universal 12VDC Tresco system

79” starter cord attached (connects to any Tresco 12VDC power supply)


Max. load capacity = 1 port x 2.1 Amp or 2 ports x 1.05 Amp

Two interchangeable face plates included (Black and Nickel)

Draws 10W at max capacity while charging. Has auto shut-off

79 in2 m

1 13/32 in37 mm

Part # Description

L-HUSB2-BLNI-1 12VDC Dual USB Charging Station

Interchangeable face plates

1 29/64 in37 mm

1 7/64 in28 mm

1 1/4 in32 mm

12VDC Dual USB Charging Station

1-7/64” (28 mm) hole required.

151

Inst

all A

cces

sori

es12

VDC

CO

MPO

NEN

TS


Install Accessories

Wire Channel

12V Class 2 Wire and DIY Connectors

Features:

Plastic channel for wire management

Available in 3 finishes (black, brown, white)

Fits all Tresco wires

Sold in 5’ (1.5 m) lengths

Easily cut to size in the field

Durable adhesive mounting

Rated for low-voltage in-wall use

See Sales Support section (page 462) for instructions on how to use Class 2 wire with Barrel Connectors.

9/32”(7.3 mm)

15/32”(11.8 mm)

Part # Description

L-WM5-BL-1 5’ (1.5 m) Wire Management Channel Black

L-WM5-BR-1 5’ (1.5 m) Wire Management Channel Brown

L-WM5-WH-1 5’ (1.5 m) Wire Management Channel White

Part # Description

L-16CL2-WH50-1 50’ (15 m) Roll 16 AWG 12V Class 2 Wire White

L-LED-WCON-WH-1 12V DIY Barrel Connectors White (1 bag of 10)

L-LED-WCON-BL-1 12V DIY Barrel Connectors Black (1 bag of 10)


Install Accessories

Part # Description

L-TOOLKIT-1 Tools of the Trade Tool Bag Starter Kit

2 mount blocks

50’ (15 m) roll of class 2 wire

10 AMP® connectors

Phillips screwdriver

Mini flathead screwdriver

AMP extractor

10 barrel connectors

10 wire management clips

1 drill bit

VHB tape

15” (381 mm) canvas bag

Tools of the Trade Starter Kit

Starter Kit Includes:

Starter Kit

Replacement Items

Part # Description

L-16CL2-WH50-1 50’ (15 m) Roll 16 AWG 12V Class 2 Wire White

L-TRANS-MNT-BL-1 Extra 6-Snap Mounting Block

L-MALE-AMP-10-1 AMP® Connector for Light Fixture (1 bag of 10)

L-WCLP-WH-1 Wire Management Adhesive Clips White (1 bag of 10)

L-LED-WCON-WH-1 12V DIY Barrel Connectors White (1 bag of 10)

L-LED-WCON-BL-1 12V DIY Barrel Connectors Black (1 bag of 10)

L-DB1732-1 17/32” (13.4 mm) Drill Bit

L-P1SCRWDR-1 #1 Phillips Screwdriver

L-MFSCRWDR-1 Mini Flathead Screwdriver

L-PINEXT-1 AMP Connector Extraction Tool

L-VHBTPE-1134-1 7/16” (11 mm) x 111-1/2’ (34 m) VHB Adhesive Tape Roll


Install Accessories All product dimensions and specifications are subject to change without prior notice.

Starter/Extension Cord

66. LED -Link Cord D 01-14-10

Hole size: 1/2”

13 mm

13 mm1/2”

1/2” (13 mm) hole required.

AMP® Connector and Extractor

Features:

Low-voltage wire

Used to extend the starter leads for any

Tresco 12VDC lights

8 lengths to choose from

VHB Tape

Pin Extractor safely removes AMP® Connectors.

Automotive grade VHB tape can be used to mount all fixtures or as a base layer for mounting Tape LED products.

Part # Description

L-PINEXT-1 AMP Connector Extraction Tool

L-MALE-AMP AMP® Connector for Light Fixture

Part # Description

L-VHBTPE-1134-1 7/16” (11 mm) x 111-1/2’ (34 m) VHB Adhesive Tape Roll

L-VHBTPE-15FT-1 3/8” (10 mm) x 15’ (4.5 m) VHB Adhesive Tape Roll

Part # Description

L-LED-LINKD-8-1 3” (8 cm) 12VDC Starter/Link/Extension Cord




L-LED-LINKD-120-1 48” (120cm) 12VDC Starter/Link/Extension Cord

L-LED-LINKD-180-1 72” (180cm) 12VDC Starter/Link/Extension Cord


power supplies - tresco lighting · pdf fileall parts included with ... • th e 12w power...

Documents