power topled datasheet version 2.2 lcp e6sc · power topled datasheet version 2.2 lcp e6sc...
TRANSCRIPT
2013-10-07
Power TOPLEDDatasheetVersion 2.2
LCP E6SC
2013-10-07 1
PowerTOPLED, a powerful member of the TOPLED family. Thanks to their high luminous efficacy, the LEDs are ideal for rear light clusters and indicators on vehicles and for display panels for traffic control systems.
PowerTOPLED, ein leistungsstarkes Mitglied der TOPLED Familie. Dank der hohen Lichtausbeute eignen sie sich ideal für Heckleuchten und Indikatoren an Fahrzeugen und für Display-Panels in Verkehrsleitsysteme.
Features: Besondere Merkmale: • Package: white PLCC-4 package, colored
diffused silicone resin• Gehäusetyp: weisses PLCC-4 Gehäuse, farbiger
diffuser Silikon-Verguss• Technology: InGaN • Technologie: InGaN • Viewing angle at 50 % IV: 120° (Lambertian
Emitter)• Abstrahlwinkel bei 50 % IV: 120° (Lambertscher
Strahler)• Color: Cx = 0.39, Cy = 0.58 acc. to CIE 1931
(pure green)• Farbe: Cx = 0.39, Cy = 0.58 nach CIE 1931 (pure
green)
Applications Anwendungen• Automotive Interior Lighting • Automobilbeleuchtung innen• Backlighting • Hinterleuchtung• General Lighting indoor • Allgemeinbeleuchtung innen
Version 2.2 LCP E6SC
Ordering InformationBestellinformationType: Luminous Intensity
1) page 20 Ordering Code
Typ: Lichtstärke 1) Seite 20 BestellnummerIF = 30 mAIV [mcd]
LCP E6SC-S2U1-45-1 224 ... 560 Q65110A4682LCP E6SC-T2V1-45-1 355 ... 900 Q65110A4683
Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5). Only one group will be shipped on each packing unit (there will be no mixing of two groups on each packing unit). E. g. LCP E6SC-T2V1-45-1 means that only one group T2, U1, U2, V1 will be shippable for any packing unit. In order to ensure availability, single brightness groups will not be orderable.In a similar manner for colors where color chromaticity coordinate groups are measured and binned, single groups will be shipped on any one packing unit. LCP E6SC-T2V1-45-1 means that the device will be shipped within the specified limits. In order to ensure availability, single color chromaticity groups groups will not be orderable (see page 6).In a similar manner for colors where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any packing unit. E. g. LCP E6SC-T2V1-45-1 means that only one forward voltage group 3,4 will be shippable. In order to ensure availability, single forward voltage groups will not be orderable (see page 5).
Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5). Es wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. LCP E6SC-T2V1-45-1 bedeutet, dass in einer Verpackungseinheit nur eine der Helligkeitsgruppen T2, U1, U2, V1 enhalten ist. Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt werden.Gleiches gilt für die Farben, bei denen Farbortgruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Farbortgruppe geliefert. Z.B. LCP E6SC-T2V1-45-1 bedeutet, dass in einer Verpackungseinheit nur eine der Farbortgruppen enthalten ist (siehe Seite 6). LCP E6SC-T2V1-45-1 bedeutet, dass das Bauteil innerhalb der spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewährleisten, können einzelne Farbortgruppen nicht bestellt werden.Gleiches gilt für die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Durchlassspannungsgruppe geliefert. Z. B. LCP E6SC-T2V1-45-1 bedeutet, dass nach Durchlassspannungsgruppen gruppiert wird. In einer Verpackungseinheit ist nur eine der Durchlassspannungsgruppen 3,4 enthalten (siehe Seite 5). Um die Liefersicherheit zu gewährleisten, können einzelne Durchlassspannungsgruppen nicht direkt bestellt werden.
2013-10-07 2
Version 2.2 LCP E6SC
Maximum RatingsGrenzwerteParameter Symbol Values UnitBezeichnung Symbol Werte EinheitOperating temperature rangeBetriebstemperatur
Top -40 ... 110 °C
Storage temperature rangeLagertemperatur
Tstg -40 ... 110 °C
Junction temperatureSperrschichttemperatur
Tj 125 °C
Forward currentDurchlassstrom(TS = 25 °C)
IF 50 mA
Surge currentStoßstrom(t <= 10 μs; D = 0.005; TS = 25 °C)
IFM 300 mA
Reverse voltage 2) page 20
Sperrspannung 2) Seite 20
(TS = 25 °C)
VR 5 V
ESD withstand voltageESD Festigkeit(acc. to ANSI/ESDA/JEDEC JS-001 - HBM, Class 2)
VESD 2 kV
2013-10-07 3
Version 2.2 LCP E6SC
Characteristics (TS = 25 °C; IF = 30 mA)KennwerteParameter Symbol Values UnitBezeichnung Symbol Werte EinheitChromaticity coordinates acc. to CIE 1931 3) page 20
Farbkoordinaten nach CIE 1931 3) Seite 20
(typ.)(typ.)
CxCy
0.390.58
--
Viewing angle at 50 % IVAbstrahlwinkel bei 50 % IV
(typ.) 2ϕ 120 °
Forward voltage 4) page 20
Durchlassspannung 4) Seite 20 (min.)(typ.)(max.)
VFVFVF
2.903.404.35
VVV
Reverse current Sperrstrom (VR = 5 V)
(typ.)(max.)
IRIR
0.0110
μAµA
Real thermal resistance junction / ambient 5) page 20 , 6) page 20
Realer Wärmewiderstand Sperrschicht / Umgebung 5) Seite 20 , 6) Seite 20
(max.) Rth JA real 300 K/W
Real thermal resistance junction / solder point 6) page 20
Realer Wärmewiderstand Sperrschicht / Lötpad 6) Seite 20
(max.) Rth JS real 180 K/W
Note: Individual forward voltage groups see next pageAnm.: Durchlassspannungsgruppen siehe nächste Seite
2013-10-07 4
Version 2.2 LCP E6SC
Brightness GroupsHelligkeitsgruppen
Forward Voltage Groups 4) page 20
Durchlassspannungsgruppen 4) Seite 20
Group Luminous Intensity 1) page 20
Luminous Intensity 1) page 20
Luminous Flux 7) page 20
Gruppe Lichtstärke 1) Seite 20 Lichtstärke 1) Seite 20 Lichtstrom 7) Seite 20
(min.) Iv [mcd] (max.) Iv [mcd] (typ.) ΦV [mlm] S2 224 280 760T1 280 355 950T2 355 450 1210U1 450 560 1520U2 560 710 1910V1 710 900 2420
Note: The standard shipping format for serial types includes either a lower family group, an upper family group or a grouping of all individual brightness groups of only a few brightness groups. Individual brightness groups cannot be ordered.
Anm.: Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere Familiengruppe oder eine Sammelgruppe, die aus nur wenigen Helligkeitsgruppen besteht. Einzelne Helligkeitsgruppen sind nicht bestellbar.
GroupGruppe (min.) VF [V] (max.) VF [V]2 2.90 3.253 3.25 3.804 3.80 4.35
2013-10-07 5
Version 2.2 LCP E6SC
Color Chromaticity Groups 3) page 20
Farbortgruppen 3) Seite 20
Chromaticity Coordinate Groups 3) page 20
Farbortgruppen 3) Seite 20
GroupGruppe
Cx Cy GroupGruppe
Cx Cy
4 0.3651 0.5662 5 0.3823 0.54950.3731 0.6245 0.3945 0.60360.3823 0.5495 0.3993 0.53280.3945 0.6036 0.4158 0.5826
OHLC2783
520530
540
550
560
570
580590
600610
620630
00
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
510
500
490
450
Cx
Cy
0.35
Cy
Cx
E
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.50
0.51
0.52
0.53
0.54
0.55
0.56
0.57
0.58
0.59
0.60
0.61
0.62
0.63
0.64
0.65
480
460470
4
5
2013-10-07 6
Version 2.2 LCP E6SC
Group Name on LabelGruppenbezeichnung auf EtikettExample: T2-4-3Beispiel: T2-4-3BrightnessHelligkeit
Chromaticity CoordinateFarbort
Forward VoltageDurchlassspannung
T2 4 3
Note: No packing unit / tape ever contains more than one group for each selection.Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten.
2013-10-07 7
Version 2.2 LCP E6SC
Relative Spectral Emission - V(λ) = Standard eye response curve 7) page 20
Relative spektrale Emission - V(λ) = spektrale Augenempfindlichkeit 7) Seite 20
Irel = f (λ); TS = 25 °C; IF = 30 mA
Radiation Characteristics 7) page 20
Abstrahlcharakteristik 7) Seite 20
Irel = f (ϕ); TS = 25 °C
OHL02670
4000
20
40
60
80
100
450 500 550 600 650 700nm
%Irel
λ
Vλ
0
0.2
0.4
1.0
0.8
0.6
ϕ
1.0 0.8 0.6 0.4
0˚10˚20˚40˚ 30˚ OHL01660
50˚
60˚
70˚
80˚
90˚
100˚0˚ 20˚ 40˚ 60˚ 80˚ 100˚ 120˚
2013-10-07 8
Version 2.2 LCP E6SC
Forward Current 7) page 20
Durchlassstrom 7) Seite 20
IF = f (VF); TS = 25 °C
Relative Luminous Intensity 7) page 20 , 8) page 20
Relative Lichtstärke 7) Seite 20 , 8) Seite 20
IV/IV(30 mA) = f(IF); TS = 25 °C
Chromaticity Coordinate Shift 7) page 20
Farbortverschiebung 7) Seite 20
Cx, Cy = f(IF); TS = 25 °C
2,6 2,8 3,0 3,2 3,4 3,6 3,8 4,0VF [V]
1
5
10
50
ΙF [mA]
1 5 10 50ΙF [mA]
0,05
0,1
0,2
0,3
0,40,5
1
2ΙVΙV (30mA)
-0.0180
IF
OHL02761
mA
Cx,Δ ΔCy
20 40 60 100
-0.012
-0.006
0
0.006
0.012
0.018
Cx
Cy
2013-10-07 9
Version 2.2 LCP E6SC
Relative Forward Voltage 7) page 20
Relative Vorwärtsspannung 7) Seite 20
ΔVF = VF - VF(25°C) = f(Tj); IF = 30 mA
Relative Luminous Intensity 7) page 20
Relative Lichtstärke 7) Seite 20
IV/IV(25)°C = f(Tj); IF = 30 mA
Chromaticity Coordinate Shift 7) page 20
Farbortverschiebung 7) Seite 20
Cx, Cy = f(Tj); IF = 30 mA
-40 -20 0 20 40 60 80 100 120Tj [°C]
-0,20
-0,15
-0,10
-0,05
0,00
0,05
0,10
0,15
0,20
0,25
0,30
V F-V
F (25
°C) [
V]
-600
-40 -20 0 20
V (25 ˚C)IIV
˚C6040Tj
100
OHL02763
0.2
0.4
0.6
0.8
1.0
1.4
-0.018-60
T
OHL02762
˚C
Cx,Δ ΔCy
-0.012
-0.006
0
0.006
0.012
0.018
Cy
Cx
-40 -20 0 20 40 60 100
j
2013-10-07 10
Version 2.2 LCP E6SC
Max. Permissible Forward CurrentMax. zulässiger DurchlassstromIF = f (T)
Permissible Pulse Handling CapabilityZulässige Impulsbelastbarkeit IF = f(tp)D: Duty cycle, TA = 25 °C
Permissible Pulse Handling CapabilityZulässige Impulsbelastbarkeit IF = f(tp)D: Duty cycle, TA = 85 °C
OHL02463
00
ImA
F
˚CT
5
10
15
20
25
30
35
40
45
50
55
20 40 60 80 100 120
temp. ambienttemp. solder point
TTS
A
AT TS
0
0.05
0.10
0.15
-5
0.20
0.25
FI
0.35
A tP=D T
tp
s
0.20.5
0.05
1
0.1
OHL01548
0.02
0.0050.01
=D
T
tP
IF
-410 -310 -210 -110 010 110 210100
0.05
0.10
0.15
-5
0.20
0.25
FI
0.35
A tP=D T
tp
s
0.20.5
0.05
1
0.1
OHL01547
0.02
0.0050.01
=D
T
tP
IF
-410 -310 -210 -110 010 110 21010
2013-10-07 11
Version 2.2 LCP E6SC
Package Outline 9) page 20
Maßzeichnung 9) Seite 20
Approximate Weight: 30 mgGewicht: 30 mgMark: bevelled edge (Cathode)Markierung: abgeschrägte Ecke (Kathode)
markingPackage
4˚±1
GPLY6991
A C
CC
0.8 (0.031)
0.6 (0.024)
2.6 (0.102)
2.1 (0.083)
2.3 (0.091)
3.0 (0.118)
3.4
(0.1
34)
3.0
(0.1
18)
(2.4
(0.0
94))
0.5
(0.0
20)
1.1
(0.0
43)
3.7
(0.1
46)
3.3
(0.1
30)
0.12 (0.005)
0.18 (0.007)
0.1 (0.004) typ
0.4 (0.016)
0.6 (0.024)
0.9 (0.035)
0.7 (0.028)
2.1 (0.083)
1.7 (0.067)
C C
A C
2013-10-07 12
Version 2.2 LCP E6SC
Recommended Solder Pad 9) page 20 Reflow solderingEmpfohlenes Lötpaddesign 9) Seite 20 Reflow-Löten
Note: Package not suitable for ultra sonic cleaning.Anm.: Das Gehäuse ist für Ultraschallreinigung nicht
geeignet.
OHLPY440
Padgeometrie fürverbesserte Wärmeableitung
improved heat dissipationPaddesign for
LötstoplackSolder resist
0.8 (0.031)
3.7
(0.1
46)
1.1
(0.0
43)
2.3 (0.091)
3.3 (0.130)
1.5
(0.0
59)
11.1
(0.4
37)
Cu Fläche / 16 mm per pad2
Cu-area_<
3.3 (0.130)
Kathode/Cathode
Anode
0.7 (0.028)
Fläche darf bei Verwendung von TOPLED®
For TOPLED® assembly do not use
elektrisch nicht beschaltet werden.
this area for electrical contact
Fläche darf bei Verwendung von TOPLED®
For TOPLED® assembly do not use
elektrisch nicht beschaltet werden.
this area for electrical contact
2013-10-07 13
Version 2.2 LCP E6SC
Reflow Soldering ProfileReflow-LötprofilPreconditioning: JEDEC Level 2 acc. to JEDEC J-STD-020D.01
00
s
OHA04525
50
100
150
200
250
300
50 100 150 200 250 300t
T
˚C
St
t
Pt
Tp240 ˚C
217 ˚C
245 ˚C
25 ˚C
L
OHA04612
Profile FeatureProfil-Charakteristik
Ramp-up rate to preheat*)
25 °C to 150 °C2 3 K/s
Time tS TSmin to TSmax
tS
tL
tP
TL
TP
100 12060
10 20 30
80 100
217
2 3
245 260
3 6
Time25 °C to TP
Time within 5 °C of the specified peaktemperature TP - 5 K
Ramp-down rate*TP to 100 °C
All temperatures refer to the center of the package, measured on the top of the component* slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range
Ramp-up rate to peak*)
TSmax to TP
Liquidus temperature
Peak temperature
Time above liquidus temperature
SymbolSymbol
UnitEinheit
Pb-Free (SnAgCu) Assembly
Minimum MaximumRecommendation
K/s
K/s
s
s
s
s
°C
°C
480
2013-10-07 14
Version 2.2 LCP E6SC
Method of Taping 9) page 20
Gurtung 9) Seite 20
OHAY05364 (0.157)
2.9 (0.114)
1.5 (0.059) 4 (0.157)
3.6
(0.1
42)
3.5
(0.1
38)
2 (0.079)
1.75
(0.0
69)
8 (0
.315
)
Cathode/Collector Marking
2013-10-07 15
Version 2.2 LCP E6SC
Tape and ReelGurtverpackung8 mm tape with 2000 pcs. on ∅ 180 mm reel, 8000 pcs. on ∅ 330 mm reel
Tape dimensions in mm (inch)Tape dimensions in mm ( inch)
Reel dimensions in mm (inch) Reel dimensions in mm ( inch)
Reel dimensions in mm ( inch)
W P0 P1 P2 D0 E F8 +0.3/-0.1 4 ± 0.1
(0.157 ± 0.004)
2 ± 0.05(0.079 ± 0.002)or4 ± 0.1(0.157 ± 0.004)
2 ± 0.05(0.079 ± 0.002)
1.5 ± 0.1(0.059 + 0.004)
1.75 ± 0.1(0.069 ± 0.004)
3.5 ± 0.05(0.217 ± 0.002)
A W Nmin W1 W2max180 (7) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 +
0.079)14.4 (0.567)
A W Nmin W1 W2max330 (13) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 +
0.079)14.4 (0.567)
D0
2P
P0
1P
WFE
Direction of unreeling
N
W1
2W
A
OHAY0324
Label
Leader:Trailer:
13.0
Direction of unreeling
±0.2
5
min. 160 mm *min. 400 mm *
*) Dimensions acc. to IEC 60286-3; EIA 481-D
2013-10-07 16
Version 2.2 LCP E6SC
Barcode-Product-Label (BPL)Barcode-Produkt-Etikett (BPL)
Dry Packing Process and MaterialsTrockenverpackung und Materialien
Note: Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter “Tape and Reel” under the topic “Dry Pack”. Here you will also find the normative references like JEDEC.
Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte. Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel “Gurtung und Verpackung” unter dem Punkt “Trockenverpackung”. Hier sind Normenbezüge, unter anderem ein Auszug der JEDEC-Norm, enthalten.
OHA04563
(G) GROUP:
1234567890(1T) LOT NO: (9D) D/C: 1234
(X) PROD NO: 123456789
(6P) BATCH NO: 1234567890
LX XXXX
RoHS Compliant
BIN1: XX-XX-X-XXX-X
MLX
Temp STXXX °C X
Pack: RXX
DEMY XXX
X_X123_1234.1234 X
9999(Q)QTY:
SemiconductorsOSRAM Opto
XX-XX-X-XLEXXPLELLXXXX
234.1234 X234.1234 X
X-X-XX-LLLLLLPLXXXXXX
12123
XXXX
MPLXX
X
X_X123_1
XX-XX
MPLPack: RXPack: RX
DEMY DEMY
MP44MPAMPMMMAMMAMMD) D/CD) D/C 234234MMMMM33PLPack: RPack: R
DEMYY
AMMMAMAMD/DMPMMM:: 12323AMAMAAM(9D(9D
XAAAXAAXAXXAXEXAEXEXEXXXXAXXEXEXX78907890EXXXXXXEXEXAEEEXEXEEXXEEXEEXEXEX:: 12345674
rrEEEEEEEEENO:NO: 234234EXorsorsXAX8908
X
RX
DEMY
12
D) D/C: 234(
7890NO: 234
p o
XXX
_123
XX-
Pack: R
DEMY
tors
OHA00539
OSRAM
Moisture-sensitive label or print
Barcode label
Desiccant
Humidity indicator
Barcode label
OSRAM
Please check the HIC immidiately afterbag opening.
Discard if circles overrun.Avoid metal contact.
WET
Do not eat.
Comparatorcheck dot
parts still adequately dry.
examine units, if necessary
examine units, if necessary
5%
15%
10%bake units
bake units
If wet,
change desiccant
If wet,
Humidity IndicatorMIL-I-8835
If wet,
Mois
ture
Level 3
Flo
or tim
e 168 H
ours
Mois
ture
Level 6
Flo
or tim
e 6
Hours
a) H
umid
ity In
dicato
r C
ard is
> 1
0% w
hen read a
t 23 ˚
C ±
5 ˚C
, or
reflo
w, v
apor-phase r
eflow
, or equiv
alent p
rocessin
g (peak p
ackage
2. Afte
r th
is b
ag is o
pened, devic
es that w
ill b
e subje
cted to
infrare
d
1. Shelf
life in
seale
d bag: 2
4 month
s at <
40 ˚
C a
nd < 9
0% rela
tive h
umid
ity (R
H).
Mois
ture
Level 5
a
at facto
ry c
onditions o
f
(if b
lank, s
eal date
is id
entical w
ith d
ate c
ode).
a) M
ounted w
ithin
b) S
tore
d at
body tem
p.
3. Devic
es require
bakin
g, befo
re m
ounting, i
f:
Bag s
eal date
Mois
ture
Level 1
Mois
ture
Level 2
Mois
ture
Level 2
a4. If b
aking is
require
d,
b) 2a o
r 2b is
not m
et.
Date
and ti
me o
pened:
refe
rence IP
C/J
ED
EC
J-S
TD
-033 fo
r bake p
rocedure
.
Flo
or tim
e see b
elow
If bla
nk, see b
ar code la
bel
Flo
or tim
e > 1
Year
Flo
or tim
e 1
Year
Flo
or tim
e 4
Weeks10%
RH
.
_<
Mois
ture
Level 4
Mois
ture
Level 5
˚C).
OPTO
SEM
ICO
NDUCTORS
MO
ISTURE S
ENSITIV
E
This b
ag conta
ins
CAUTION
Flo
or tim
e 72 H
ours
Flo
or tim
e 48 H
ours
Flo
or tim
e 24 H
ours
30 ˚C
/60%
RH
.
_<
LE
VE
L
If bla
nk, see
bar code la
bel
2013-10-07 17
Version 2.2 LCP E6SC
Transportation Packing and MaterialsKartonverpackung und Materialien
Dimensions of transportation box in mm (inch):Width / Breite Length / Länge Height / Höhe200 ± 5 (7.874 ± 0.196) 352 ± 5 (13.858 ± 0.196)
195 ± 5 (7.677 ± 0.1968) 352 ± 5 (13.858 ± 0.196)
30 ± 5 (1.181 ± 0.196) 33 ± 5 (1.299 ± 0.196)
Notes HinweiseThe evaluation of eye safety occurs according to the standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LED specified in this data sheet fall into the class Exempt group (exposure time 10000 s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation.
Die Bewertung der Augensicherheit erfolgt nach dem Standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Im Risikogruppensystem dieser CIE- Norm erfüllen die in diesem Datenblatt angegebenen LEDs folgende Gruppenanforderung - Exempt group (Expositionsdauer 10000 s). Unter realen Umständen (für Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengefährdung aus. Grundsätzlich sollte jedoch erwähnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundäres Gefahrenpotenzial besitzen. Nach einem Blick in eine helle Lichtquelle (z.B. Autoscheinwerfer), kann ein temporär eingeschränktes Sehvermögen oder auch Nachbilder zu Irritationen, Belästigungen, Beeinträchtigungen oder sogar Unfällen führen.
OHA02044
PACKVAR:
R077Additional TEXT
P-1+Q-1
Multi TOPLED
Muste
r
OSRAM Opto
Semiconductors
(6P) BATCH NO:
(X) PROD NO:
10
(9D) D/C:
11(1T) LOT NO:
210021998
123GH1234
024 5
(Q)QTY: 2000
0144
(G) GROUP:
260 C RT240 C R
3
220 C R
MLBin3:Bin2: Q
-1-20
Bin1: P-1-20
LSY T6762
2a
Temp ST
R18DEMY
PACKVAR:
R077Additional TEXT
P-1+Q-1
Multi TOPLED
Muste
r
OSRAM Opto
Semiconductors
(6P) BATCH NO:
(X) PROD NO:
10
(9D) D/C:
11(1T) LOT NO:
210021998
123GH1234
024 5
(Q)QTY: 2000
0144
(G) GROUP:
260 C RT240 C R
3
220 C R
MLBin3:Bin2: Q
-1-20
Bin1: P-1-20
LSY T6762
2a
Temp ST
R18DEMY
OSRAM
Packing
Sealing label
Barcode label
Mois
ture
Level 3
Flo
or tim
e 168 H
ours
Mois
ture
Level 6
Flo
or tim
e 6
Hours
a) H
umid
ity In
dicato
r C
ard is
> 1
0% w
hen read a
t 23 ˚
C ±
5 ˚C
, or
reflo
w, v
apor-phase r
eflow
, or equiv
alent p
rocessin
g (peak p
ackage
2. Afte
r th
is b
ag is o
pened, devic
es that w
ill b
e subje
cted to
infrare
d
1. Shelf
life in
seale
d bag: 2
4 month
s at <
40 ˚
C a
nd < 9
0% rela
tive h
umid
ity (R
H).
Mois
ture
Level 5
a
at facto
ry c
onditions o
f
(if b
lank, s
eal date
is id
entical w
ith d
ate c
ode).
a) M
ounted w
ithin
b) S
tore
d at
body tem
p.
3. Devic
es require
bakin
g, befo
re m
ounting, i
f:
Bag s
eal date
Mois
ture
Level 1
Mois
ture
Level 2
Mois
ture
Level 2
a4. If b
aking is
require
d,
b) 2a o
r 2b is
not m
et.
Date
and ti
me o
pened:
refe
rence IP
C/J
ED
EC
J-S
TD
-033 fo
r bake p
rocedure
.
Flo
or tim
e see b
elow
If bla
nk, see b
ar code la
bel
Flo
or tim
e > 1
Year
Flo
or tim
e 1
Year
Flo
or tim
e 4
Weeks10%
RH
.
_<
Mois
ture
Level 4
Mois
ture
Level 5
˚C).
OPTO
SEM
ICO
NDUCTORS
MO
ISTURE S
ENSITIV
E
This b
ag conta
ins
CAUTION
Flo
or tim
e 72 H
ours
Flo
or tim
e 48 H
ours
Flo
or tim
e 24 H
ours
30 ˚C
/60%
RH
.
_<
LE
VE
L
If bla
nk, see
bar code la
bel
Barcode label
2013-10-07 18
Version 2.2 LCP E6SC
Date of Change: 2011-11-03Revision Date: 2013-10-07 Version Subjects Date of change2.0 OS-PCN-2011-002A 2011-11-03
Disclaimer DisclaimerAttention please!The information describes the type of component and shall not be considered as assured characteristics.Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet.PackingPlease use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred.Components used in life-support devices or systems must be expressly authorized for such purpose!Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS.
*) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system.**) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.
Bitte beachten!Lieferbedingungen und Änderungen im Design vorbehalten. Aufgrund technischer Anforderungen können die Bauteile Gefahrstoffe enthalten. Für weitere Informationen zu gewünschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet.VerpackungBenutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nächstgelegene Vertriebsbüro. Wir nehmen das Verpackungsmaterial zurück, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Für Verpackungsmaterial, das unsortiert an uns zurückgeschickt wird oder das wir nicht annehmen müssen, stellen wir Ihnen die anfallenden Kosten in Rechnung.Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, müssen für diese Zwecke ausdrücklich zugelassen sein!Kritische Bauteile* dürfen in lebenserhaltenden Apparaten und Systemen** nur dann eingesetzt werden, wenn ein schriftliches Einverständnis von OSRAM OS vorliegt.
*) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems führen wird oder die Sicherheit oder Effektivität dieses Apparates oder Systems beeinträchtigt.**) Lebenserhaltende Apparate oder Systeme sind für (a) die Implantierung in den menschlichen Körper oder (b) für die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist.
2013-10-07 19
Version 2.2 LCP E6SC
Glossary Glossar1) Brightness: Brightness values are measured during
a current pulse of typically 25 ms, with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (acc. to GUM with a coverage factor of k = 3).
1) Helligkeit: Helligkeitswerte werden während eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von ± 8 % und einer erweiterten Messunsicherheit von ± 11 % gemessen (gemäß GUM mit Erweiterungsfaktor k = 3).
2) Reverse Voltage: Driving the LED in reverse direction is suitable for short term application.
2) Sperrspannung: Die LED kann kurzzeitig in Sperrrichtung betrieben werden.
3) Chromaticity coordinate groups: Chromaticity coordinates are measured during a current pulse of typically 25 ms, with an internal reproducibility of ± 0.005 and an expanded uncertainty of ± 0.01 (acc. to GUM with a coverage factor of k = 3).
3) Farbortgruppen: Farbkoordinaten werden während eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von ± 0,005 und einer erweiterten Messunsicherheit von ± 0,01 gemessen (gemäß GUM mit Erweiterungsfaktor k = 3).
4) Forward Voltage: The forward voltage is measured during a current pulse of typically 8 ms, with an internal reproducibility of ± 0.05 V and an expanded uncertainty of ± 0.1 V (acc. to GUM with a coverage factor of k = 3).
4) Durchlassspannung: Vorwärtsspannungen werden während eines Strompulses einer typischen Dauer von 8 ms, mit einer internen Reproduzierbarkeit von ± 0,05 V und einer erweiterten Messunsicherheit von ± 0,1 V gemessen (gemäß GUM mit Erweiterungsfaktor k = 3).
5) Thermal Resistance: RthJA results from mounting on PC board FR 4 (pad size 16mm² per pad)
5) Wärmewiderstand: RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgröße 16mm² je pad)
6) Thermal Resistance: Rth max is based on statistic values (6σ).
6) Wärmewiderstand: Rth max basiert auf statistischen Werten (6σ).
7) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice.
7) Typische Werte: Wegen der besonderen Prozessbedingungen bei der Herstellung von LED können typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes überein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden können. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankündigung geändert.
8) Relative Brightness Curve: In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit.
8) Relative Helligkeitskurve: Im gestrichelten Bereich der Kennlinien muss mit erhöhten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden.
9) Tolerance of Measure: Dimensions are specified as follows: mm (inch).
9) Maßtoleranz: Maße werden wie folgt angegeben: mm (inch).
2013-10-07 20
Version 2.2 LCP E6SC
Published by OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg www.osram-os.com © All Rights Reserved.2013-10-07 21