powercube brochure

2
Lowering Your Refrigeration Costs Revolutionary Marvel Guarantees To Save You Up To 33% On Your Refrigeration Electricity Costs While Prolonging The Life Of Your Equipment T here’s an on-going problem with the operation of today’s commercial refrigeration thermostats. Businesses, unknowingly, are spending more than they need to for electricity and for shortened operational life of hardware. Here’s the untold story. When it comes to refrigeration of food products, temperature monitoring and control has been dependent upon measurement of the air, not the food itself. Air, which is a gas, warms and cools very quickly. This factor triggers your air-oriented cooling system to cycle often. However, solids and liquids, which have dramatically more mass or density than air, absorb temperature change much more slowly. As a result, a cooling system, oriented to actual food temperature, cycles less frequently. Fewer cycle times translate into big savings. Fortunately, you don’t need to replace anything. There’s now a simple way to modify how your thermostats function by reorienting them to monitor food instead of air. What is it and how does it work? The revolutionary add-on device, called POWERCUBE, completely isolates the temperature sensor from the air and, instead, encapsulates it with an engineered food simulant, so that the sensor monitors equivalent food temperature. Refrigeration units work as a series of cycles. This automated activity maintains the required storage temperature with alternating starts and stops. On/off air cycles typically run for a minimum of 12 cycles per hour and, in some open display cases, up to 20 cycles per hour. Today’s refrigeration units monitor circulating air temperature in order to decide when to switch on and off. However, because air temperature naturally warms far more quickly than food temperature, these systems work harder than necessary to maintain stored products at the right temperature. This, in turn, leads to excessive electricity consumption and undue wear and tear on your equipment. Attention: Commercial Food Refrigeration Users With POWERCUBE in place on your thermostat, your system can regulate according to the temperature of yogurt or frozen meat, for instance, instead of the temperature of air. POWERCUBE controls the compressor with incredible accuracy to significantly reduce the frequency of costly on/off cycles. Here’s an analogy to the comparison of a “before” and “after” retrofit: Drive a car in the city for an hour, then drive the car on the interstate highway for an hour. Either way, the driving time is the same. The city version is filled with lots of stop and go driving, a hotter engine, and low gas mileage for a shorter distance. The interstate highway scenario enables the car to run cooler and farther with fewer interruptions and better gas mileage. The same holds true when using POWERCUBE. The compressor runs cooler while consuming fewer kilowatt-hours (kWh) of electricity by having fewer starts and stops. Most compressors have a 4-to-1 ratio, meaning they draw four times as much electricity in starting up in comparison to continually running. Because start-ups use four times more power (i.e. start-up usage of 16 amps, versus run usage of 4 amps), considerable energy savings can be achieved. In addition, the more efficient refrigeration cycle leads to a more efficient unit, which then leads to a colder storage area. Consequently, the thermostat can be adjusted to a slightly higher set-point temperature for further substantial energy savings, without compromising food safety, shelf-life, and quality. Although the POWERCUBE cycles last longer, their frequency can be reduced by as much as 80%. For example, a Dairy Case air cycles 3 minutes on, 2 minutes off, which equals 12 cycles per hour. With the POWERCUBE fitted, the cycles change to 8 minutes on, 7 minutes off, which equals just 4 cycles per hour. This equates to a 66.7% reduction in starts and an 11.1% reduction in total run time. © 2011 Senergy Solar Corp 610-609-0278 “Nearly 20% of Global energy is used used for refrigeration.”

Upload: blogking

Post on 13-Jan-2016

119 views

Category:

Documents


0 download

DESCRIPTION

The revolutionary add-on device, called POWERCUBE, completely isolates the temperature sensor from the air and, instead, encapsulates it with an engineered food simulant, so that the sensor monitors equivalent food temperature. With POWERCUBE in place on your thermostat, your system can regulate according to the temperature of yogurt or frozen meat, for instance, instead of the temperature of air. POWERCUBE controls the compressor with incredible accuracy to significantly reduce the frequency of costly on/off cycles.

TRANSCRIPT

Page 1: PowerCube Brochure

Lowering Your Refrigeration Costs

Revolutionary MarvelGuarantees To Save You Up To 33%

On Your Refrigeration Electricity CostsWhile Prolonging The Life Of Your Equipment

There’s an on-going problem with the operation oftoday’s commercial refrigeration thermostats.Businesses, unknowingly, are spending more than

they need to for electricity and for shortened operationallife of hardware.

Here’s the untold story. When it comes to refrigerationof food products, temperature monitoring and control hasbeen dependent uponmeasurement of the air, not thefood itself. Air, which is a gas,warms and cools very quickly.This factor triggers your air-oriented cooling system tocycle often. However, solids and liquids, which havedramatically more mass or density than air, absorbtemperature change much more slowly. As a result, acooling system, oriented to actual food temperature, cyclesless frequently. Fewer cycle times translate into big savings.

Fortunately, you don’t need to replaceanything. There’s now a simple way tomodify how your thermostats function byreorienting them to monitor food insteadof air.

What is it and how does it work?The revolutionary add-on device,

called POWERCUBE, completelyisolates the temperature sensor from the airand, instead, encapsulates it with anengineered food simulant, so that the sensormonitors equivalent food temperature.

Refrigeration units work as a seriesof cycles. This automated activitymaintains the required storage temperature with alternatingstarts and stops. On/off air cycles typically run for aminimum of 12 cycles per hour and, in some open displaycases, up to 20 cycles per hour.

Today’s refrigeration units monitor circulating airtemperature in order to decide when to switch on and off.However, because air temperature naturally warms far morequickly than food temperature, these systems work harderthan necessary to maintain stored products at the righttemperature. This, in turn, leads to excessive electricityconsumption and undue wear and tear on your equipment.

Attention: Commercial Food Refrigeration Users With POWERCUBE in placeon your thermostat, your systemcan regulate according to thetemperature of yogurt or frozenmeat, for instance, instead ofthe temperature of air.POWERCUBE controlsthe compressor withincredible accuracy tosignificantly reduce thefrequency of costlyon/off cycles.

Here’s an analogy to the comparison of a “before”and “after” retrofit: Drive a car in the city for an hour,then drive the car on the interstate highway for an hour.

Either way, the driving timeis the same. The cityversion is filled with lots ofstop and go driving, a hotterengine, and low gas mileage

for a shorter distance. The interstate highway scenarioenables the car to run cooler and farther with fewerinterruptions and better gas mileage. The same holds truewhen using POWERCUBE. The compressor runs coolerwhile consuming fewer kilowatt-hours (kWh) ofelectricity by having fewer starts and stops. Most

compressors have a 4-to-1 ratio,meaning they draw four times

as much electricity instarting up in comparisonto continually running.Because start-ups use fourtimes more power (i.e.start-up usage of 16 amps,versus run usage of 4amps), considerable energysavings can be achieved.In addition, the moreefficient refrigeration cycle

leads to a more efficient unit,which then leads to a colder storage area. Consequently,the thermostat can be adjusted to a slightly higher set-pointtemperature for further substantial energy savings, withoutcompromising food safety, shelf-life, and quality.

Although the POWERCUBE cycles last longer, theirfrequency can be reduced by as much as 80%. Forexample, a Dairy Case air cycles 3 minutes on, 2 minutesoff, which equals 12 cycles per hour. With thePOWERCUBE fitted, the cycles change to 8 minutes on,7 minutes off, which equals just 4 cycles per hour. Thisequates to a 66.7% reduction in starts and an 11.1%reduction in total run time.

© 2011 Senergy Solar Corp610-609-0278

“Nearly 20% of Global energyis used used for refrigeration.”

Page 2: PowerCube Brochure

© 2011 Senergy Solar Corp

Lowering Your Refrigeration Costs

Refrigeration Energy CostIt’s all about the TEMPERATURE!

gives you a better way to control cooling duration levels and set-points!

The Value of Longer On-CyclesConventionally, thermostats start and stop compressors as temperature of air

changes between set-points. Since air temperature varies quickly, this generatesnumerous on/off cycles (typically 3-minute cycles), each individually without

having very much net cooling effect on the foodtemperature. However, with POWERCUBE fitted,

on-cycles typically run for 8 to 10 minutes,resulting in a positive food temperaturereduction, since the food is cooled moreeffectively. Longer cycles take advantageof the food’s thermal inertia. This leads tomore efficient use of the refrigerator

system, lower total run-time & energy consumption, and safer food.

The Value of Longer Off-CyclesWith POWERCUBE installed, longer off-cycles allow pressure equalization

between the high and low pressure parts of the refrigerant system. This results ina “softer” start from an overall cooler system, which keeps the compressor frombeing unnecessarily tripped by an unbalanced or high pressure status. In otherwords, low amperage clean starts obtain maximum efficiency more quickly, whichprovides more energy savings. Reliability and life span of all system componentsare enhanced with lowered power use. Over time, this also means fewer costlybreakdowns and service repairs.

High

light

s

Important Benefits You Receive with POWERCUBE Simulates food temperature accurately (certified as food-safe by NSF*) Enables thermostats to monitor critical food temperature instead of less critical air temperature Saves up to 33% on refrigeration energy costs Reduces on/off cycle frequency by 50% or more Optimizes the refrigerated environment for safer food and less spoilage Extends the operational life of equipment while minimizing breakdowns Installs quickly and integrates easily Compatible with electronic and mechanical thermostats Consists of no moving parts or electrical components to wear out or fail Qualifies for reduced CO2 emissions Offers a one-time investment with fast ROI for year-after-year savings Lasts indefinitely; never needs replacing Five-year limited warranty

*National Safety Foundation International

“We have had 23 PowerCubeunits installed on ourrefrigeration equipmentthroughout the hotel. Sincebeing installed, we have notedsignificant reductions inenergy bills and have reportedconsiderably less equipmentfailure. We are delighted withthe PowerCube’s performance,which has helped us reduceour carbon footprint and, mostimportantly, our operatingcosts. We would happilyrecommend this amazingtechnology to all industriesutilizing refrigerationequipment.”

Mark FrancisMaintenance ManagerRamada Plaza Gatwick

For more information, please contact:Senergy Solar Corp

610-609-0278