www.kuhlmeyer.de

www.kuhlmeyer.de

PORTAL-BELT-GRINDING MACHINE TYPE PBM

• with a right and a left machine stand equipped with adjustable hollow screws M30 for the tightening on the ground

• each stand with a vertical support on hardened double round guidings

• with ball screws and safety nut • drive of each of the vertical supports by

synchronized gear motors with P = 0,75 kW • with a traverse between the machine stands in

approx. 3200 mm height • adjustable vertically way 1500 mm • with a horizontal support on the vertical supports • drive of the both horizontal supports by a

synchronized gear motor with P = 0,55 kW • horizontal drive way 650 mm • left horizontal support with a worm gear drive

swivel head for the grinding belt drive unit • drive of the swivel head by a gear motor with P =

0,12 kW • swivel angle 90°• right horizontal support with grinding belt

tensioning unit • drive of the grinding belt by a frequency controlled

motor with P = 4,0 kW • belt speed adjustable between 5 and 25 m/s • connection between the grinding belt drive and

tensioning unit by a torsion free traverse, the pressure tool is positioned on a linear guiding on top of the traverse

• tool carrier with an adapter to change between the pressure pad and the contact drum

• manual use of the pressure tool by a hand lever

• with extraction spigot left at the grinding drive unit • extraction spigot D = 200 mm, needed air

consumption app. 3500 m³/h • with safety hood at the tensioning unit and the top

belt cover • with a hydraulic scissors lift table, load 1500 kg, on a

carrier • carrier movable on 4 flanged wheels on 3 m rails • movable way app. 2000 mm • with locking break • scissors lift table with a safety rip wire

• lift 1000 mm• scissors lift table with round rails to carry sliding

tables or handling devices • either with smooth running prism rolls • with an operator panel and a hand held remote

control for the set up • machine is complete installed (pneumatic, electric,

hydraulic)

www.kuhlmeyer.de

PORTAL-BELT-GRINDING MACHINE TYPE PBM

• with a right and a left machine stand equipped with adjustable hollow screws M30 for the tightening on the ground

• each stand with a vertical support on hardened double round guidings

• with ball screws and safety nut • drive of each of the vertical supports by

synchronized gear motors with P = 0,75 kW • with a traverse between the machine stands in

approx. 3200 mm height • adjustable vertically way 1500 mm • with a horizontal support on the vertical supports • drive of the both horizontal supports by a

synchronized gear motor with P = 0,55 kW • horizontal drive way 650 mm • left horizontal support with a worm gear drive

swivel head for the grinding belt drive unit • drive of the swivel head by a gear motor with P =

0,12 kW • swivel angle 90°• right horizontal support with grinding belt

tensioning unit • drive of the grinding belt by a frequency controlled

motor with P = 4,0 kW • belt speed adjustable between 5 and 25 m/s • connection between the grinding belt drive and

tensioning unit by a torsion free traverse, the pressure tool is positioned on a linear guiding on top of the traverse

• tool carrier with an adapter to change between the pressure pad and the contact drum

• manual use of the pressure tool by a hand lever

• with extraction spigot left at the grinding drive unit • extraction spigot D = 200 mm, needed air

consumption app. 3500 m³/h • with safety hood at the tensioning unit and the top

belt cover • with a hydraulic scissors lift table, load 1500 kg, on a

carrier • carrier movable on 4 flanged wheels on 3 m rails • movable way app. 2000 mm • with locking break • scissors lift table with a safety rip wire

• lift 1000 mm• scissors lift table with round rails to carry sliding

tables or handling devices • either with smooth running prism rolls • with an operator panel and a hand held remote

control for the set up • machine is complete installed (pneumatic, electric,

hydraulic)

PBM 3• machine table size 1000 x 3000 mm • scissors lift table 2500 x 1000 mm • grinding belt dimension max. 120 x 9000 mm

PBM 4• machine table size 1000 x 4000 mm • scissors lift table 3500 x 1000 mm • grinding belt dimension max. 120 x 11000 mm

www.kuhlmeyer.de

www.kuhlmeyer.de

TOOL AUTOMATIC • drive of the tools by a toothed belt by a frequency gear motor with P = 0,25 kW • speed adjustable between 0,3 and 0,8 m/s • pressure control of the contact drum or the pressure pad by pneumatic cylinder • pressure control via constant counter pressure and adjustable working pressure • connected by a supply drag chain