What would you do?

Objective

Terminal Learning Objective: Perform the functions of the ECP

Operator Control Station systems

• Action: Perform the functions of the Control Station computer.

• Conditions: Given an operator’s manual, all applicable handouts,

in a classroom environment, and hands-on-instruction.

• Standard: Perform all tasks on the operator task list with less than

20% errors requiring remediation on the performance evaluation.

3

Power-On Procedures

The ECP Control Station Server requires a minimum of 6 minutes to boot up prior to turning on the ECP Operator Station. Therefore, the first step in operating the ECP equipment is to power on the ECP CS Server.

Power-on ECP Control Station Server

Step 1: Ensure the ECP CS Server is plugged in to a viable 30 amp 120 VAC power source

Step 2: Push and hold thePower button until the Uninterruptable Power Supply (UPS) turns on.

5

Power-on ECP Control Station Server

Note: When the Uninterruptable Power Supply or UPS is ONthere are 3 solid lights.

Once the UPS is on, the Video Encoder will turn on automatically.

6

Power-on ECP Control Station Server

Step 3: Next, turn on the IOLAN device server by flipping the toggle switch to the ON position.

7

Power-on ECP Control Station Server

Step 4: Open the server dust screen door by turning the knob counter clockwise and pulling open the door. Next, press the power button on the right hand side of the server and close and lock the dust screen door by turning the knob clockwise.

8

* Wait 6 minutes before turning on Operator Station. Server needs time to configure.

Power-on ECP Control Station

Step 1: Push and hold the Power button until the UPS turns on.

Step 2: Unlock screws and slide tray out until it locks with an audible click.

9

1

2

Perform login procedures

Step 1: Log-in to

JBC2S using the

following user name

and password.

Username: Operator

Password: Operator

10

Menu Options

The JBC2S Menu Options

are located at the top left of

the JBC2S Screen.

The Menu Options are –

• File

• View

• Maps

• Share

• Paths

• Tools

• Help

11

Knowledge Check

How do you obtain local maps for JBC2S?

Local maps must be loaded into the software.

Maps Menu

The Maps menu displays:

1. Area of Interest

• Go To – Allows the user to

go to the preset Area of

Interest (AOI)

• Set Current - Allows the

user to set Area of Interest

(AOI)

13

What information can be shared under the Share menu?

Knowledge Check

Map data such as graphics, targets or zones.

What tool allows a user to enter coordinates in one of 6 JBC2S formats and then read them in any of the other formats?

Coordinate Converter.

Peripheral Actions

Mouse actions that are

available to the ECP operator

within the JBC2S system

include but are not limited to

the following:

• Mouse Hover

• Left Single Click

• Left Double Click

• Scroll Wheel Turn

• Scroll Wheel Click

• Right Single Click

15

Knowledge Check

What is hydraulic drift?

Hydraulic drift can occur over time meaning the arm will start to lower. It will send an open indication (in red) to JBC2S. The operator will have to close periodically by sending close command to the barrier. If barrier needs to remain up there are locking pins on either side of the barrier.

Peripheral Operations - Camera

Track PTZ camera with

peripheral.

1. Scrolling with the live

video window selected –

zooms the video in and out.

Note: If the camera can be

zoomed, this is an optical

zoom. Otherwise, it is a

digital zoom.

17

Peripheral Operations - Joystick

Using the joystick to track a

PTZ camera:

1. Camera Pan – tilting to

the right causes the

camera to pan right.

Tilting to the left causes

the camera to pan left.

18

Pan Left Pan Right

E-STOP ALL

The E-STOP ALL

function is for emergency

situations such as a barrier

about to cause harm to

personnel or equipment.

This button, when clicked,

stops all barriers in their

current position or in the

case of the drop arm

barrier it will reverse

directions.

19

Delta Pop-Up Barrier Manual Operations

20

Step 1: Locate the Pop-Up

hydraulic pump unit (HPU)

for the barrier.

Step 2: Locate the barrier

plate manual hydraulic control

handle and hold it in the

forward position until the

barrier plate is completely

lowered. Place the handle

back in the forward position

once the barrier plate has been

completely lowered.