LOGO

POWERSIL-NT-PESNon-Thermo Migrating Softener

(2014-2015)

Thermo migration is the movement of disperse

dye from fibre / fabric into the spin-finish or

finishing chemical used in processing , during

heat treatment & storage period

Heat setting promotes dye migration from the

fiber interior to the fiber surface, leading to

lower wash fastness. This phenomenon is

known as thermo migration which is the

diffusion of dye as a result of the breakage of

the interaction between dye and fiber by the

increased thermal motion of both the dye

molecule and the polymer chain at elevated

temperatures.

What Is Thermomigration?

LOGO

oPolyester and its blends have been widely

used for sportswear and leisurewear which

need to have high level of wash fastness to

endure frequent washing.

oRecently there is a worldwide growth in the

micro denier polyester because of the soft

hand and comfort.

Market Trend

As the diameter of the fiber becomes smaller, the total surface area of the fiber increases considerably. A greater amount of dye is needed for the micro denier polyester to reach the same depth of shade as the conventional polyester. These often result in deteriorating wash fastness of the micro denier polyester. Thus thermo migration becomes more severe as the denier of fiber is smaller, and it is regarded as the origin of low wash fastness of the micro denier polyester.

The fiber thickness. The chemical structure of the disperse dye. the amount of absorbed dye in the fiber. heat setting conditions. Thermo-migration in stenter is promoted between

140- 1800C . Thermo migration is triggered with nonionic ethylene oxide surfactants

available in spin-finish chemicals applied on dyed fibers during yarn manufacturing or in silicone softeners in stenter padders.

Factors Influencing Thermomigration

Wash fastness of dyed polyester fabric is closely related to the degree of thermo-migration of disperse dye during heat setting.

It is an innovative special silicone emulsion which in contrast to classic formulations does not enhance the thermo-migration of dispersed dyes on polyester fabric.

Due to a sophisticated formulation thermo-migration and bleeding is reduced, wash fastness properties are improved & the colour depth is enhanced.

Suitable for Poly/Viscose, Poly/Wool & polyester fabrics.

Excellent elastic resilience, soft and smooth handle.

It is exhaustible silicone with cationic character

Why Powersil-NT-PES

Thermomigration Results

Fabric: Disperse black & 4% Brown-3RD dyed Polyester Fabric Application: By pad(60% wet pick up) , dry (100ºC) & Cure 180ºC for 40 secs)

Test method: Cured Fabric tested for dye migration on Whatman Filter Paper No-1.Take a two glass slide one without hole & 2nd with hole in centre of 5mm. Place Whatman Filter paper on centre of slide which is without hole & above it place treated fabric cut in circle form of 5x5 cm & cover it with holed slide & pour 0.5 ml of Perchloroethylene & dry & observe for dye migrated.

Disperse Black

Disperse Brown-3RD

S.No Products Dosage (g/l)

1 Untreated ----2 (Conventional Micro

Amino Silicone)20

3 Aquasil-HNT 204 Powersil-360 205 Powersil-NT-PES 20

Powersil-NT-PES• Non-Thermomigrating

effects on PES & PES blend fabrics.

• Excellent soft handle

• Improved wash fastness

• Enhanced colour depth.

L. N. CHEMICAL INDUSTRIES

OFFICE ADDRESS :403, “Antariksh”, Makwana Road,Marol Naka, Andheri (E),Mumbai – 400 059

Tel.- 91-22-4221 6789 (30 Lines) 91-22-6692 4112Fax -91-22-2836 6434

FACTORY ADDRESS :D- 14 /10, T.T.C. M.I.D.C Industrial area,Turbhe , P. O. K. U. Bazar,Navi Mumbai – 400 705

Tel.-91-22-4141 9899 (100 Lines)Fax -91-22-4141 9888

Email ID: ketan@lnchem.innayana.lnchem@gmail.com