ppt of solid modeling for cad
TRANSCRIPT
![Page 1: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/1.jpg)
Active Learning Assignment On Solid Modeling
GANDHINAGAR INSTITUTE OF
TECHNOLOGY
Computer Aided Design (2161903)
Prepared By:- Ayush Upadhyay (150123119053)
Guided By:- Prof. Dhaval Patel
![Page 2: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/2.jpg)
![Page 3: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/3.jpg)
Two-Dimensional Drawing 2-D is not ideal for representing 3-D objects
2-D has no Z axis
2-D is flat!
![Page 4: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/4.jpg)
Three-Dimensional Modeling3-D models include X, Y, and Z dimensionsAllows better definition of three-dimensional objectsThere are three general types of 3-D models
- Wire Frame Models- Surface Models- Solid Models
![Page 5: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/5.jpg)
Wire Frame ModelsOldest form of 3D modelingOld technology - not used todayModel Contains edges and vertices Cannot represent complex surfacesNo details regarding interior of partAmbiguous
![Page 6: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/6.jpg)
Wireframe models are Ambiguous…What does this object really look like?
![Page 7: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/7.jpg)
Wireframe Ambiguity (Cont.)Which face is front and which is back?
![Page 8: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/8.jpg)
Surface ModelsCame after Wireframe modelsStill used todayModel Contains edges and vertices and exterior surfaces Can represent complex exterior surfacesNo details regarding interior of partToo ambiguous for engineering analysis
![Page 9: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/9.jpg)
Solid ModelsCurrent “state of the art”Model Contains edges and vertices , exterior surfaces, and interior detailsPart is unambiguously definedMay be used for engineering analysis
![Page 10: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/10.jpg)
![Page 11: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/11.jpg)
Why Solid Modeling?Recall weakness of wireframe and surface modeling
Ambiguous geometric description incomplete geometric description lack topological information Tedious modeling process Awkward user interface
![Page 12: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/12.jpg)
![Page 13: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/13.jpg)
![Page 14: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/14.jpg)
Solid modelSolid modeling is based on complete, valid and unambiguous geometric representation of physical object.
Complete points in space can be classified.(inside/ outside) Valid vertices, edges, faces are connected properly. Unambiguous there can only be one interpretation of object
Analysis automation and integration is possible only with solid models has properties such as weight, moment of inertia, mass.Solid model consist of geometric and topological data
Geometry shape, size, location of geometric elements Topology connectivity and associatively of geometric
elements non graphical, relational information
![Page 15: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/15.jpg)
![Page 16: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/16.jpg)
![Page 17: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/17.jpg)
![Page 18: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/18.jpg)
Solid model representation schemes
1.Primitive instancing2.Regularized Boolean set operations3.Sweep representations.4.Boundary representations (B-reps) 5.Constructive solid geometry (CSG)6.Spatial-partitioning representations - Octree representation
![Page 19: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/19.jpg)
![Page 20: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/20.jpg)
![Page 21: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/21.jpg)
![Page 22: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/22.jpg)
![Page 23: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/23.jpg)
Constructive solid geometry (CSG)
Objects are represented as a combination of simpler solid objects (primitives).The primitives are such as cube, cylinder, cone, torus, sphere etc. Copies or “instances” of these primitive shapes are created and positioned.A complete solid model is constructed by combining these “instances” using set specific, logic operations (Boolean)Boolean operation
each primitive solid is assumed to be a set of points, a boolean operation is performed on point sets and the result is a solid model.
Boolean operation union, intersection and difference The relative location and orientation of the two primitives have to be
defined before the boolean operation can be performed. Boolean operation can be applied to two solids other than the
primitives.
![Page 24: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/24.jpg)
Constructive Solid Geometry Methods
Constructive Solid Geometry (CSG) performs solid modelling by generating a new object from two 3-dimensional objects using a set operationValid set operations include Union Intersection Difference
![Page 25: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/25.jpg)
CSG OperationsPrimitives:
Union:
Intersection:
Difference:
![Page 26: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/26.jpg)
Constructive Solid Geometry Methods (cont…)
Difference
Intersection
![Page 27: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/27.jpg)
Constructive Solid Geometry Methods (cont…)CSG usually starts with a small set of primitives such as blocks, pyramids, spheres and conesTwo objects re initially created and combined using some set operation to create a new objectThis object can then be combined with another primitive to make another new objectThis process continues until modelling complete
![Page 28: ppt of solid modeling for cad](https://reader036.vdocument.in/reader036/viewer/2022062412/58ced8851a28abd4098b5d79/html5/thumbnails/28.jpg)