pragati times · 2019-07-19 · pragati times towards excellence in education page 6 s.no academic...

PRAGATI TIMES TOWARDS EXCELLENCE IN EDUCATION

NEWS LETTER JUL – DEC2015

1. LIST OF NEW FACULTY WHO HAVE JOINED/FACULTY WHO HAVE LEFT: 1. The following faculty members have joined the departments:

1. Mr. D.V.G.Srinivas

2. Mr. N.Raghuveer

3. Ms. D.Mahalakshmi

1. The following faculty members have left the college: 1. Mr. M.Suryanarayana

2. PAPERS PUBLISHED/PRESENTED OR ACCEPTED FOR PUBLICATION /

PRESENTATION IN JOURNALS/CONFERENCES BY FACULTY.

RESEARCH PUBLICATIONS IN NATIONAL/INTERNATIONAL JOURNALS:

1. DrS.Sambhu Prasad, MrG.SatishandMrG.Panduranga have published a paper

entitled “Comparison of flow analysis through sudden contraction and enlargement of

pipes by providing smooth corners” in International Journal of Engineering Trends and

Technology (IJETT) during July-2015. ISSN: 2231-5381 Page No: 205-211.volume 25

number-4.

http://ijettjournal.org/2015/volume-25/number-4/IJETT-V25P238.pdf

2. DrS.Sambhu Prasad andMrG.Pandurangahave published a paper entitled “ Stress

and Displacement Analysis of Rectangular Stainless Steel Plate with Elliptical Cut-out

of Different Orientation” in International Journal of Engineering Research and General

Science (IJEPGS) during July-August, 2015. ISSN 2091-2730. Page No: 121-126

Volume 3, Issue 4, Part-2

http://pnrsolution.org/Datacenter/Vol3/Issue4/165.pdf

3. MrG.Pandurangaand MrP.Sukumarhave published a paper entitled “Buckling

Analysis of Column Made of 4140 Alloy Steel with Different Cross Sections in Fixed

Free Condition” in International Journal of Modern Trends in Engineering and

Research (IJMTER) during August 2015.ISSN (Online):2349–9745; Page No: 93-100

Volume 02, Issue 08.

http://www.ijmter.com/papers/volume-2/issue-8/buckling-analysis-of-column-made-

of-4140-alloy-steel-with-different-cr.pdf

4. Dr. S. Sambhu Prasad has published a paper entitled “Finite Element Modeling and

Analysis of Nozzle Local Loads of Spherical Pressure Vessel Subjected to Internal

Pressure” in IUP Journal of Mechanical Engineering publications (A Division of

ICFAI) during November 2015. Page No: 24-42 Volume 03. No.4.

http://www.iupindia.in/1511/Mechanical%20Engineering/Finite_Element_Modeling.html

http://ijettjournal.org/2015/volume-25/number-4/IJETT-V25P238.pdf

http://pnrsolution.org/Datacenter/Vol3/Issue4/165.pdf

http://www.ijmter.com/papers/volume-2/issue-8/buckling-analysis-of-column-made-of-4140-alloy-steel-with-different-cr.pdf

http://www.ijmter.com/papers/volume-2/issue-8/buckling-analysis-of-column-made-of-4140-alloy-steel-with-different-cr.pdf

http://www.iupindia.in/1511/Mechanical%20Engineering/Finite_Element_Modeling.html


5. Dr. S. Sambhu Prasad has published a paper entitled “Structural Analysis of Large

Ethane Storage Sphere for Design Pressure and Seismic Loads” in IUP Journal of

Mechanical Engineering publications during November 2015. Volume 03. No.4.

6. MrG.AvinashandMrS.Srikanthhave published a paper entitled “Structural Analysis

of A Car Chassis By Using E-Glass Epoxy and Kevlar Composites” in International

Journal for Science and Advance Research In Technology (IJSART) during December

2015.ISSN [ONLINE]: 2395-1052 Page No: 159-163 Volume 01, Issue 12.

http://www.ijsart.com/pdf_up/26ijsart_150101609.pdf

7. MrsCh.Vasantha Lakshmi have published a paper entitled “Design and structural

analysis of composite coated clutch plate by using composite materials” in

International Journal & Magazine of Engineering, Technology, Management and

Research(IJMETMR) during December 2015 . ISSN: 2348-4845 Page No: 1639-1643

Volume 02, Issue 12.

http://www.ijmetmr.com/oldecember2015/SandhyaRaniV-ChVasanthaLakshmi-A-142.pdf

8. 8.MrD.J.Johnsonhas published a paper entitled “Structural And Modal Analysis Of

Different Roll Cage Models In On-Road Transport Vehicle” in International Research

Journal of Engineering And Technology(IRJET) during December2015. ISSN: 2395-

0056 Page No:667-673 Volume02,Issue 09.S.No: 110

https://www.irjet.net/vol-2-issue-9

PUBLICATIONS IN NATIONAL/INTERNATIONAL CONFERENCES:

1. MrG.Satish has published a research paper entitled as “finite element analysis of

axial flow turbine” at International Conference MULTICON’15 held on 29th

and 30th

April, 2015 Organized by Muthayammal engineering college, Rasipuram, Namakkal

District, Tamilnadu.

3. AWARDS/RECOGNITIONS OBTAINED BY THE COLLEGE STUDENTS.

AWARDS OBTAINED:

PARTICIPATION:

S.NO ACTIVITY NAME YEAR NAME OF THE

EVENT PLACE DATES AWARD

1 Work Shop K Sri Sai Raghavendra III EZENITH BITS Pilani HYD 9&10 Oct '15 1st

2 Work Shop K selven raj III EZENITH BITS Pilani HYD 9&10 Oct '15 1st

3 Work Shop DivyaTej III EZENITH BITS Pilani HYD 9&10 Oct '15 1st

4 Work Shop VeeraBabu III EZENITH BITS Pilani HYD 9&10 Oct '15 1st

5 Work Shop A Sandeep III TECHNOZION'15 NIT Warangal 30&31 Oct '15 3rd

6 Work Shop K Manikanta III TECHNOZION'15 NIT Warangal 30&31 Oct '15 3rd

7 Work Shop S VenkataDurga

Prasad III TECHNOZION'15 NIT Warangal 30&31 Oct '15 3rd

8 Work Shop J D S Vara Prakash III TECHNOZION'15 NIT Warangal 30&31 Oct '15 3rd

http://www.ijsart.com/pdf_up/26ijsart_150101609.pdf

http://www.ijmetmr.com/oldecember2015/SandhyaRaniV-ChVasanthaLakshmi-A-142.pdf

https://www.irjet.net/vol-2-issue-9


S.NO ACTIVITY NAME YEAR NAME OF THE

EVENT PLACE DATES

1 Spot Event J D S V Prakash III TECHNOZION'15 NIT Warangal 30th 31st

Oct2015

2 Work

Shop S Durga Prasad III

Awareness of Eco

Friendly vinayaka Brain Lab Kakinada

15th 16th Sep

2015

3 Work

Shop M Sukumar III

Awareness of Eco

Friendly vinayaka Brain Lab Kakinada

15th 16th Sep

2015

4 Auto quiz R Suneel III ATMOS'15 BITS Pilani HYD 9th 10th Oct 2015

5 Auto quiz Chsrinivas III ATMOS'15 BITS Pilani HYD 9th 10th Oct 2015

6 Auto quiz A LokeshManivarma III ATMOS'15 BITS Pilani HYD 9th 10th Oct 2015

7 Auto quiz Ch Krishna Kumar III ATMOS'15 BITS Pilani HYD 9th 10th Oct 2015

4. CONFERENCES/ FDPs/ SEMINIORS ATTENDED BY FACULTY.

1. Mr. K V V N R Chandra Mouli attended a one day faculty development programme

on “Coaching on Teaching”organized by CII(Confederation of Indian Industries) at

Visakhapatnam on 12th

November’2015.

2. Mr.Ch Ram Prasad attended a Two Day workshop on “CFD& Applications”

Conducted by VR Siddhartha Engineering College,Vijayawada during 21st& 22

nd

December’2015.

5. GUEST LECTURES 1. Department of Mechanical Engineeringhas Conducted a Guest Lecture on “Materials and

Metallurgical Engineering” by Dr.M.R.R. Prasad, M.Sc. Ph.D., Scientist SF(superannuated),

Vikram Sarabhai Space Centre, ISRO, Department of Space, Government of India on 30-07-

2015 and total of 180 students are participated.

6. WORKSHOPS/ EVENTS ORGANISED BY FACULTY.

ENGINEER’S DAY:

On the eve of Engineer’s day, the following events were conducted for 2nd

, 3rd

and final

year B.Tech students.

1) Technical Quiz

2) JAM (Just a Minute)

3) Group Discussions

Prof.S.Sambhu Prasad, Principal has addressed the students and gave his valuable speech

on Engineer’s day and motivated the students and distributed the certificates to the prize

winners. Power point presentations on Engineer’s day and Recent trends in mechanical

Engineering domain are given by Final year and third year Students. Mrs.Ch.Vasantha

Lakshmi (Head of the Department) has also addressed the gathering.

Number of participants in the above events is as follows:

1) Technical Quiz-180


2) JAM-40

3) Group Discussions-60

The following students got the prizes in the respective events

Technical Quiz

S.no Name of the student Year Prize

1. P.H.R.S.N.S.Sharma IV Year I st prize

2. K.V.Sairam IV Year I st prize

3. R.Saikumar III Year I st prize

4. S.Srinivasu III Year I st prize

5. K.Sunilkumar III Year I st prize

6. R.Tirupathirao III Year I st prize

7. CH.V.Kalyanchowdary II Year I st prize

8. K.Saikishore II Year I st prize

9. P.Rajesh IV Year II nd

prize

10. V.D.S.R.Mohan IV Year II nd

prize

11. B.H.Saiprasanth III Year II nd

prize

12. J.V.D.Nageswararao III Year II nd

prize

13. S.N.V.Ganesh III Year II nd

prize

14. B.S.V.S.S.Vijay III Year II nd

prize

15. R.Lokesh II Year II nd

prize

16. P.Subrahmanyam II Year II nd

prize

Group Discussion


1. M.Divyend IV Year I st prize

2. P.SaiNath IV Year II nd

prize

3. M.Saimanojkumar II Year III rd

prize

4. M.G.Saisantosh II Year consolation

Jam


1. K.Devivaraprasad IV Year I stprize

2. Y.Prudhvi Krishna sai III Year II nd

prize

3. N.Pavankalyan II Year III rd

prize


WATERBOTIX

A two day robotic workshop “WATERBOTIX” was organized by department of Mechanical Engineering in association with SakRobotix Lab Pvt. Ltd. On 9

th& 10

th October 2015. A total

of 98 students have participated in the workshop from II and III year mechanical engineering.

On Day1 the explanation on the basics of the workshop and the distribution of kits to the students is happened. On Day2 robots are prepared and executed.

6. INDUSTRIAL VISITS BY STUDENTS


S.No Academic

year

Name of the

Industry Date of visits Year - Sem No of students

1 2015-16

SRINIVASA

POLYMERS

19/12/15

26/12/15

28/12/15

III-I 90

2 2015-16

RELAIANCE

INDUSTRIES LTD 10/10/15 III-I 60

3 2015-16

SRI SARVARAYA

SUGARS PRIVATE

LTD

31/07/15 &

01/08/15 III-I 200

7. INTERNSHIP/INDUSTRIAL TRAINING UNDERGONE BY THE STUDENTS

S.No Name of the Industry From To No of

days

Year -

Sem

No of

students

1 STEEL PLANT 21/9/2015 4/10/2015 15 III-II 7



4 ORDINANCE

FACTORY,MEDAK 3/01/2016 18/1/2016 15 III-II 6

8. PLACEMENTS

S.No Roll number Name Photo Placed

1. 12A31A0390 KESANAKURTHI ANUDEEP

TATA CONSULTANCY

SERVICES

2. 12A31A0336 NALLAMILLI BULLISWAMI

REDDY

TATA CONSULTANCY

SERVICES

3. 12A31A0361 AKKIREDDI U B

SREELAKSHMIRATNAPRIYA

TATA CONSULTANCY

SERVICES

4. 12A31A0318 INALA SAI VENKATA MANI

AKHIL

TATA CONSULTANCY

SERVICES

5. 12A31A0324 KAMIREDDY DEVI VARA

PRASAD

TATA CONSULTANCY

SERVICES


6. 12A31A0393 KONDA RAMU

TATA CONSULTANCY

SERVICES

7. 12A31A03C0 PALAKOLLU SAINATH

TECH-MAHINDRA

8. 12A31A03A8 SAMANTHAKURTI AKHILESH

TECH-MAHINDRA

9. 12A31A0362 MADHURI NIKITHA PYDAH

TECH-MAHINDRA

10. 12A31A03A0 MUNJULURI N VENKATA

RAMA SAI DIVYEND

TECH-MAHINDRA

11. 12A31A0380 DUVVURI ARUN KANTH

TECH-MAHINDRA

12. 12A31A0386 INJETI KSHITESH

TECH-MAHINDRA

9. HIGHER EDUCATION

The following students of ME qualified in GATE 2015

S. No. Name of the student Roll No Rank

1 BeharaShyamSundar 11A31A0313 12879

2 Mohammad KhasimMohidinShareef 11A31A0340 17999

3 BommidiAtcha Rao 11A31A0314 26899

4 Duppala Naveen 11A31A0320 35000


10. RESULT ANALYSIS:

I-II

SUBJECT APPEARED PASSED FAIL %

ME-A

ENGLISH-II 59 59 0 100.00

MATHEMATICS-III 59 46 13 77.97

ENGINEERING PHYSICS 59 39 20 66.10

MATHEMATICAL METHODS 59 53 6 89.83

PROFESSIONAL ETHICS AND HUMAN VALUES 59 56 3 94.92

ENGINEERING DRAWING 59 52 7 88.14

ENGINEERING PHYSICS LAB 59 59 0 100.00

ENGLISH COMMUNICATION SKILLS LAB 59 59 0 100.00

ENGINEERING WORKSHOP AND IT WORKSHOP LAB 59 59 0 100.00

SUBJECT

APPEARE

D

PASSE

D FAIL %

ME-B

ENGLISH-II 59 59 0 100.00








ENGINEERING WORKSHOP AND IT WORKSHOP

LAB 59 59 0 100.00

SUBJECT

APPEARE

D

PASSE

D FAIL %

ME-C

ENGLISH-II 57 57 0 100.00









ENGINEERING WORKSHOP AND IT WORKSHOP LAB 57 57 0 100.00


ME-D

ENGLISH-II 58 56 2 96.551724






ENGINEERING PHYSICS LAB 58 58 0 100

ENGLISH COMMUNICATION SKILLS LAB 58 58 0 100

ENGINEERING WORKSHOP AND IT WORKSHOP

LAB 58 58 0 100

YEAR AND SEMESTER WISE RESULT ANALYSIS, OCTOBER-2015

YEAR & SEMESTER APPEARED PASSED FAILED PASS %

I-II ME-A 59 31 28 52.54

I-II ME-B 59 25 34 42.37

I-II ME-C 57 31 26 54.39

I-II ME-D 58 32 26 55.17

A & B & C & D 233 119 114 51.07

ME-A ME-B ME-C ME-D

FAILED IN 1 SUB 13 14 12 12






II-II


II ME-A

KINEMATICS OF MACHINERY 73 60 13 82.19

FLUID MECHANICS & HYDRAULIC MACHINERY 73 49 24 67.12

THERMAL ENGINEERING -I 73 63 10 86.30

PRODUCTION TECHNOLOGY 73 62 11 84.93

MACHINE DRAWING 73 69 4 94.52


THERMAL ENGINEERING LAB 73 72 1 98.63

PRODUCTION TECHNOLOGY LAB 73 72 1 98.63

FLUID MECHANICS & HYDRAULIC MACHINERY LAB 73 73 0 100.00


II ME-B








FLUID MECHANICS & HYDRAULIC MACHINERY LAB 70 70 0 100


II ME-C








FLUID MECHANICS & HYDRAULIC MACHINERY LAB 70 70 0 100.00

YEAR AND SEMESTER WISE RESULT ANALYSIS, AUGUST-2015

YEAR & SEMESTER APPEARED PASSED FAIL %

II-II ME-A 73 44 29 60.27

II-II ME-B 70 49 21 70.00

II-II ME-C 70 37 33 52.86

II-II ME 213 130 83 61.03

II ME-A II ME-B II ME-C

NO.OF STUDENTS FAILED IN 1 SUB 11 9 15








III-II

SUBJECT APPEARED PASSED FAIL % APPEARED PASSED FAIL %

III ME-A III ME-B

METROLOGY 70 55 15 78.57 63 51 12 80.95

ROBOTICS 70 65 5 92.86 63 58 5 92.06

HEAT TRANSFER 70 60 10 85.71 63 51 12 80.95

INSTRUMENTATION AND CONTROL SYSTEMS 70 58 12 82.86 63 54 9 85.71

DESIGN OF MACHINE MEMBERS-II 70 53 17 75.71 63 52 11 82.54

INDUSTRIAL ENDINEERING AND MANAGEMENT 70 61 9 87.14 63 54 9 85.71

LABS

METROLOGY AND INSTRUMENTATION LAB 70 69 1 98.57 63 63 0 100

HEAT TRANSFER LAB 70 70 0 100 63 63 0 100

YEAR AND SEMESTER WISE RESULT ANALYSIS,AUGUST-2015

YEAR & SEMESTER APPEARED PASSED FAIL %

III-II ME-A 70 42 28 60.00

III-II ME-B 63 35 28 55.56

A & B 133 77 56 57.89

III ME-A III ME-B

NO.OF STUDENTS FAILED IN 1 SUB 11 12






pragati times · 2019-07-19 · pragati times towards excellence in education page 6 s.no academic...

Documents