pre-filled syringes west coast 2017
TRANSCRIPT
Successful Incorporation of Human Factors in Prefi lled Devices08.30 - 12.30
Workshop Leader: Melanie Turieo, Director, Global MedTech Division, Cambridge Consultants
PLUS ONE INTERACTIVE HALF-DAY POST-CONFERENCE WORKSHOPWednesday 7th June, Hyatt Regency, Mission Bay, San Diego, CA, USA
REGISTER BY 28TH FEBRUARY AND SAVE $300REGISTER BY 31ST MARCH AND SAVE $200REGISTER BY 28TH APRIL AND SAVE $100
Sponsored by:
Enabling quality excellence through innovation
SMi proudly present their 2nd annual conference and exhibition...
Pre-Filled SyringesWest Coast
5TH - 6TH
JUNE 2017Hyatt Regency, Mission Bay, San Diego, CA, USA Hyatt Regency, Mission Bay, San Diego, CA, USA
CHAIR: • Mike Stelmah, Senior Manager, Combination
Products Regulatory Affairs, Regeneron
KEYNOTE SPEAKERS: • John Smith, Director, Global Regulatory Affairs, Allergan • Anand Subramony, Vice President Drug Delivery & Device
Development, MedImmune • Benir Ruano, VP, Global Manufacturing and Technical
Operations, Xeris Pharmaceuticals • Ron Forster, Executive Director, Amgen • Sara McNew, Director, Human Factors and Industrial
Design, Eli Lilly • Alasdair Young, Device Engineer, Genentech • Lori de los Reyes, Global Regulatory Affairs, Amgen • Ariel Waitz, Senior Engineer, Genentech • Aaron Chesterman, Principal Engineer, Device
Development, Genentech • Tina Rees, Associate Director – Human Factors, Ferring • Mayumi Bowen, Senior Engineer, Genentech • Monica de Bardi, Postdoctoral Researcher, Roche
To attend, contact Fateja Begum on Tel +44 (0) 20 7827 6184, Fax +44 (0) 20 7827 6185, email [email protected]
or visit www.smi-online.co.uk/ts05.asp to register online @SMIPHARM#smipfsusa
HIGHLIGHTS IN 2017: • Explore and harness the global regulatory ecosystem;
global compliance requirements for product safety and risk analysis
• Assess data bridging and risk based control strategies for combination products
• Map the importance of Human factors and patient centricity in device design
• Highlight the emerging trends of connected health and the future of patient centric drug delivery
• Cutting edge industry insight on silicone free devices, virtual reality, and laser cutting in the design and manufacture of prefi lled devices
Enabling quality excellence through innovation
CHAIR: • Mike Stelmah, Senior Manager, Combination
Products Regulatory Affairs, Regeneron
KEYNOTE SPEAKERS: • John Smith, Director, Global Regulatory Affairs, Allergan • Anand Subramony, Vice President Drug Delivery & Device
Development, MedImmune • Benir Ruano, VP, Global Manufacturing and Technical
Operations, Xeris Pharmaceuticals
HIGHLIGHTS IN 2017: • Explore and harness the global regulatory ecosystem;
global compliance requirements for product safety and risk analysis
Pre-Filled Syringes West Coast Day One | Monday 5th June 2017 www.smi-online.co.uk/ts05.asp
08.30 Registration & Coffee
09.00 Chairman’s Session Opening Remarks Mike Stelmah, Senior Manager, Combination Products
Regulatory Affairs, Regeneron
OPENING ADDRESS09.10 Navigating the global regulatory ecosystem • Taking into account regulatory requirements for USA,
Europe and ROW to ensure your product’s success on a global market
• Update on key points from different regulatory bodies • What to consider when seeking approval; safety
assessments, human factors considerations John Smith, Director, Global Regulatory Affairs, Allergan
09.50 Navigating technical complaints, product safety and regulatory requirements
• Taking into account regulatory requirements for product safety and complaint handling
• Update on key product failures and challenges • What to consider while planning safety assessments, risk
analysis and complaint handling for clinical studies and commercial
Mike Stelmah, Senior Manager, Combination Products Regulatory Affairs, Regeneron
10.30 Morning Coffee and Networking Break sponsored by
11.00 Large volume subcutaneous infusion devices; in vivo and in vitro challenges
• Drivers for large volume subcutaneous delivery • Technical criteria when evaluating devices for large
volume subcutaneous delivery • Use of large volume subcutaneous devices in clinic,
including potential complicating factors Ariel Waitz, Senior Engineer, Genentech Aaron Chesterman, Principal Engineer, Device
Development, Genentech
11.40 PLAJEX with safe ‘n’ sound; safe delivery of biotherapeutics • Polymer PFS are developed for providing an
appropriate primary drug container, particularly for biopharmaceuticals
• A platform of add-on passive sharps injury protection devices for PFS are serving the patients and healthcare providers for minimizing the risks of needle-stick injuries
• A cooperation to establish and confi rm compatibility between PLAJEX COP prefi llable syringes and the Safe’n’Sound device platform
William Dierick, Director of Technology Development, Terumo Adrien Tisserand, Global Category Manager – Parenteral &
CMO, Nemera
12.20 Networking Lunch sponsored by Worrell
13.30 Combination product data bridging • Guidance on clinical bridging, examples of when clinical
bridging may be necessary • Clinical home use study design • Examples of FDA feedback on the need for clinical home
use • Leveraging pre-existing data and human factors Lori de los Reyes, Director, Global Regulatory Affairs, Amgen
14.10 Combination product, a need for innovative and customizable drug delivery devices
Adrien Tisserand, Global Category Manager - Parenteral & CMO, Nemera
14.50 OXYCAPT™ multilayer plastic vial & syringe with glass-like gas barrier for biologics
• Glass vs. plastic • Disadvantages of plastic • How to overcome the disadvantages of plastic Shota Arakawa, Researcher, Mitsubishi Gas Chemical
15.30 Afternoon Tea and Networking Break sponsored by
16.00 An approach to developing risk-based control strategies for combination products
• Defi ning and establishing critical quality attributes for a combination product
• Utilizing a risk-based approach to defi ning a control system
• A case study on deployment of the control strategy process for a combination product
Alasdair Young, Device Engineer, Genentech 16.40 Glucagon synthetic peptide formulation in PFS fi lled
auto-injector combination product platform • Challenges with a non-aqueous drug formulation
compatibility with PFS components • Challenges with manufacturing aseptically fi lled low
fi ll volume PFS • Challenges with an international supply chain Benir Ruano, VP, Global Manufacturing and Technical
Operations, Xeris Pharmaceuticals
17.20 Panel Discussion: Combination products – challenges and opportunities
• On the road to patient-centric drug delivery - understanding the patient’s interaction with the delivery system to be able to incorporate features which promote adherence to treatments
• Identifying the good manufacturing regulations that apply to combination products
• Technical challenges for developing and manufacturing combination products
• Regulatory hurdles in obtaining approval for pre-fi lled syringes and pens in human factors studies
Moderated by: John Smith, Director, Global Regulatory Affairs, Allergan
Anand Subramony, Vice President Drug Delivery & Device Development, MedImmune
Tina Rees, Associate Director - Human Factors, Ferring Sara McNew, Director, Human Factors and Industrial Design,
Eli Lilly
18.00 Chairman’s Closing Remarks and Close of Day One
REGULATION & STRATEGY
DESIGN CONSIDERATIONS FOR PFS
To attend, contact Fateja Begum on Tel +44 (0) 20 7827 6184, Fax +44 (0) 20 7827 6185, email [email protected] or visit www.smi-online.co.uk/ts05.asp to register online
BIOLOGICS – CHALLENGES AND OPPORTUNITIES
Conference Chairman’s Welcome LetterDear Participants,
Pre-fi lled syringe (PFS) role in pharmaceutical industry has become more critical in the recent years. Syringes are no longer used just as a standalone product, but are key aspects of autoinjectors and safety systems that provide improved usability and safety for the patients. With these improvements, come the technical, regulatory and drug development challenges associated with using a PFS.
Pre-fi lled Syringes may seem as simple products, but as each process and feature of the syringe increases the complexity of the product and needs signifi cant focus to achieve a successful launch on the market. From glass cane creation, syringe forming, siliconization, leachable and extractable studies, to device integration, regulatory fi ling and functional testing; all play a vital role to make a functional product approved on the market and safely used by patients. It is critical to develop working relationships and collaborations, as an industry, to bring knowledge to the suppliers and drug developers worldwide, so that we can address these challenges. Thank you to everyone who contributes to this goal and looking forward to your participation at the conference.
Sincerely,
Mike Stelmah, MBA, PMP, RAC (US & Global)Sr. Manager, Combination Products Regulatory AffairsRegeneron Pharmaceutical, Inc.
Mike Stelmah, MBA, PMP, RAC (US & Global)
Pre-Filled Syringes West Coastwww.smi-online.co.uk/ts05.asp Day Two | Tuesday 6th June 2017
GIVING YOUR DEVICE A HUMAN TOUCH
08.30 Registration & Coffee
09.00 Chairman’s Opening Remarks Mike Stelmah, Senior Manager, Combination Products
Regulatory Affairs, Regeneron
09.10 Creating patient centric combination products • Patient centricity • Connected health • Drug delivery Anand Subramony, Vice President Drug Delivery & Device
Development, MedImmune 09.50 How Mixed Reality will drive the future of drug delivery
product development • What does virtual reality mean for ethnography and
human factors testing? • How can we use augmented reality to impact device
development & sales? • How can we apply this to the frontlines of healthcare? Derek Mathers, Director of Advanced Applications
Development, Worrell Matt Gottschalk, Medical Device Consultant, Worrell
10.30 Morning Coffee and Networking Break sponsored by
11.00 Giving the device a human touch • The role of patient centricity in drug delivery and device
development • Successfully incorporating human factors into device
design • Human factors regulations and guidelines for successful
approval Sara McNew, Director, Human Factors and Industrial
Design, Eli Lilly
11.40 Human factors implications of innovative delivery systems for biologics
• Overview of alternatives to prefi lled syringes in parenteral drug delivery, such as autoinjectors, patches, pumps, and pens
• Performing formative and summative human factors studies with alternative delivery systems
• Examples of development and human factors validation of innovative delivery systems
Tina Rees, Associate Director, Human Factors, Ferring
12.20 Networking Lunch sponsored by Worrell
13.30 Driving Particles to Zero • Intrinsic particles: what are the specifi c challenges
presented by the silicone layer, and silicone oil free systems?
• Extrinsic particles: supplier to fi ll fi nish • Considerations for combination products • Case study examples of silicone free devices; what are
the pros and cons? Ron Forster, Executive Director, Amgen
14.10 COP- Technical data update • Key properties of COP – demonstrating the value and
characteristics of COP compared with glass • Case study: Study on protein adsorption/aggregation with
actual protein drug – COP vs. glass • Case study: study on delamination with glass syringe vs.
COP syringe • Leachable data on COP syringe with various chemicals Toshiro Katayama, Senior Product Manager, Zeon
14.50 Controlled depth radiation sterilization for external surface of ocular syringes
• Challenges for external surface sterilization for syringes fi lled with biologics
• Technology concept of controlled depth radiation • Study results: effect of controlled depth radiation on
lethality, biologic quality, and syringe discoloration Mayumi Bowen, Senior Engineer, Genentech
15.30 Afternoon Tea and Networking Break sponsored by
16.00 Innovative technologies in the manufacturing process of glass pre-fi lled syringes
• Introduction of a laser-assisted glass cutting technology resulting in reduced glass particle count, mechanically stronger and more dimensionally stable fi nger fl anges
• Features and benefi ts of an innovative X-ray inspection unit addressing increasing regulatory requirements for CCI and for drug delivery systems safety
Philippe Lauwers, Business Unit Director Pre-fi llable Syringes, Nipro Pharma Packaging
Matteo Falgari, Business Development Manager Pre-fi llable Syringes, Nipro PharmaPackaging
16.40 Needle clogging in SIN-PFS fi lled with high concentration protein solution
• Understanding of the solidifi cation process of mAb solutions
• Infl uence of water vapour diffusion through the RNS during storage
• Considerations on RNS leachables migrating in the drug product
Monica di Bardi, Postdoctoral Researcher, Roche
17.20 Panel Discussion: The future of parenteral drug delivery
• Addressing the need and challenges of high volume injectables:
- Commercial opportunity and challenges - User considerations - Technologies: wearable injectors, hand held auto-
injectors & syringes etc. • Connectivity and connected devices: - Are they the future of parenteral drug delivery? Moderated by: Mike Stelmah, Senior Manager,
Combination Products Regulatory Affairs, Regeneron Derek Mathers, Director of Advanced Applications
Development, Worrell
18.00 Chairman’s Closing Remarks and Close of Day Two
MANUFACTURING DEVELOPMENTS & OPPORTUNITIES
To attend, contact Fateja Begum on Tel +44 (0) 20 7827 6184, Fax +44 (0) 20 7827 6185, email [email protected] or visit www.smi-online.co.uk/ts05.asp to register online
Successful incorporation of Human Factors in prefi lled devices
Overview of the workshop:This workshop will provide guidance and advice on how to successfully incorporate human factors into prefi lled devices. Improve your understanding of human factors for pre-fi lled syringes in the context of the whole user interface; including instructional material, training and packaging. Learn to succeed in the application of human factors in pre-fi lled devices to enable delivery of high quality, market leading devices.
Why should you attend this workshop:• How to successfully incorporate
human factors into device development
• Considerations for design and evaluation
• Navigating regulations and seeking approval
• Ensuring success; case study examples • How to balance safety, usability and
commercial success
About the workshop leader:Melanie Turieo is a Director in Cambridge Consultants’ Global MedTech division, and Department Leader for Human Centered Design. Melanie has over 20 years’ experience providing Human
Factors expertise to the design and development of regulated and safety-critical items, including medical, military and consumer products. Her technical expertise has focused for the last 10 years on human factors engineering in the design and development of medical products, and she has extensive experience designing and conducting user research for medical devices, especially drug delivery systems including injection and inhalation technology.
About the organisation:Cambridge Consultants develops breakthrough products, creates IP, and provides business consultancy in technology-critical issues for clients worldwide. For more than 50 years, they have been helping clients turn business opportunities into commercial successes, from launching fi rst-to-market products, entering new markets to expanding existing markets through new technologies. Their auto-injector, inhaler and injection device development programs extend from concept creation through to industrialisation, with a ‘quality by design’ approach and full compliance with international regulatory standards. www.cambridgeconsultants.com
Programme
8.30 Registration & Coffee
9.00 Workshop leaders’ opening remarks and introduction
9.10 Incorporating human factors into prefi lled device development
• What to consider when making your device human
- Design intent - Tests and evaluations - Seeking regulatory approval – what to
provide to gain regulatory approval
9.40 Case study examples – common pitfalls vs success stories
10.10 Discussion
10.30 Morning Coffee
11.00 The bigger picture; human factors as an ecosystem consideration
• Human factors is not a stand-alone consideration
• Balancing safety, usability and commercial success
12.00 Discussion
12.30 Workshop leader’s comments and close of Workshop
Half-Day Post-Conference WorkshopWednesday 7th June 2017, Hyatt Regency, Mission Bay, San Diego, CA
To attend, contact Fateja Begum on Tel +44 (0) 20 7827 6184, Fax +44 (0) 20 7827 6185, email [email protected] or visit www.smi-online.co.uk/ts05.asp to register online
Melanie Turieo, Director, Human Factors & Industrial Design, Cambridge Consultants
List of past attendees:
• Abbott Laboratories• Alkermes• Allergan• Amgen• Anteris Medical GmbH• Baxalta• Baxter Healthcare• Bayer Healthcare• Bayer HealthCare AG• BCM Group LLC• Biogen Inc• Boehringer Ingelheim• Boehringer Ingelheim
Pharmaceuticals Incorporated
• Bosch Packaging Technology
• Bristol-Myers Squibb Co• Cambridge Consultants Ltd• Centurion Medical Products• DDL• Eli Lilly • Emergent BioSolutions Inc.
• ENCO Pharmaceutical Development, Inc. (EPDI)
• Epione BioPharmaceuticals• FDA• Genentech• Genentech, Inc.• Getinge A B• Gilead Sciences• Gilead Sciences Inc• Insulet Corp• IntraCellular Therapies Inc• Ionis Pharmaceuticals, Inc.• KBI Biopharma• LoneStar Heart Inc• Maeda industry Co Ltd• Merck, Sharp & Dohme Corp.• MITSUBISHI GAS CHEMICAL
COMPANY, INC• Mitsubishi Gas Chemical
Singapore Pte Ltd• Noxilizer, Inc.• PAREXEL International• Pfi zer
• Pfi zer CentreOne• Pharmacircle• Shire• Shire US Inc• Steris Corp• STERIS FINN-AQUA• Takeda Pharmaceuticals• Telefl ex• Terumo Americas Holding, Inc• Terumo Medical
Corporation• Teva Pharamceuticals• Teva Pharmaceuticals• UserWise• Versartis, Inc.• W.L. Gore & Associates, Inc.• Xcelthera• Xeris Pharmaceuticals• Xeris Pharmaceuticals, Inc.• ZebraSCI• zebrasci inc• Zeon Chemicals L.P.
Pre-Filled Syringes 2015/2016 Conference Attendee Profi le
Networking opportunities at Pre-Filled Syringes West Coast
Regulatory 2% Vendors 20%
Pharmaceuticals & Biotechnology 78%
Pre-Filled Syringes West Coast Online at www.smi-online.co.uk/ts05.asp
MITSUBISHI GAS CHEMICAL Mitsubishi Gas Chemical is a leading company in the fi eld of oxygen barrier and absorbing technologies. Based on these technologies and experiences, we have successfully developed multilayer plastic vial and syringe having excellent oxygen and water vapor barrier. The products make it possible to replace glass with plastic for injectable drugs. www.mgc.co.jp
NEMERANemera is a world leader in the design, development and manufacturing of drug delivery solutions for pharmaceutical, biotechnology and generics industries. Nemera’s expertise covers several modes of delivery: Parenteral, Nasal, Buccal, Auricular, Ophthalmic, Pulmonary, Dermal and Transdermal. Nemera leverages decades of experience in the parenteral device segment from full development to pure contract manufacturing, through customized solutions. Nemera developed: Safe’n’Sound®, a fully passive safety device for prefi lled syringes to avoid accidental needle-sticks and Safelia®, a new generation of 2-steps auto-injector for fl uid and viscous formulations. www.nemera.net
NIPRO PHARMAPACKAGING Nipro PharmaPackaging is specialized in developing and manufacturing advanced pharma packaging products and complete packaging solutions for early development drugs or enhancement of packaging solutions of existing drugs. With a worldwide manufacturing footprint of 19 plants, multiple sales offi ces and lab services, Nipro offers an exceptional service platform. www.nipro-pharmapackaging.com
OVERLOOK INDUSTRIESOverlook Industries, Inc. believes that the future of liquid packaging lies in the fl exibility to adapt to ever changing product and customer demands. Overlook Freedom Filler™ kits embody our eighteen year heritage of maximizing productivity, while providing the ultimate in customization and fl exibility. Overlook Freedom Filler™ kits include all necessary components of the fl uid path and can be provided particularly cleaned, multi-bagged and gamma sterilized per customer requirements. www.ovlk.com
TERUMO PHARMACEUTICAL SOLUTIONS Terumo Pharmaceutical Solutions offers the pharmaceutical and biotechnology industry unique solutions in medical technology. In addition to offering our valued products, our specialized team also provides customized and dedicated solutions designed to meet your specifi c requirements. www.terumo-ps.com
WORRELL Worrell is a design fi rm focused on healthcare innovation. Since 1976, our team of impassioned creatives has applied the principles of design to the practice of medicine. Today, our clients look to us for our expertise in digital health, medical device and emerging markets to create better health outcomes. With offi ces in Minneapolis, Minnesota and Shanghai, China we are uniquely equipped to apply research, strategy, user experience and industrial design, engineering, prototyping and human factors engineering capabilities to some of the most complex healthcare problems globally to meet the needs of patients and providers. www.worrell.com
ZEONZeon Chemical’s Zeonex® and Zeonor® cyclo olefi n polymers (COP) allow for advanced, break-resistant syringes, vials and lyophilization containers for protein-based, peptide-based biopharmaceuticals, high viscosity drugs, and contrast media. They also offer high purity, “glass-like” transparency, sterilization, low water adsorption, and superior moldability, as well as overcome protein absorption and pH shift concerns. www.zeonex.com
PROUDLY SPONSORED BY:
Supported by
SPONSORSHIP AND EXHIBITION OPPORTUNITIESSMi offer sponsorship, exhibition, advertising and branding packages, uniquely tailored to complement your company’s marketing strategy. Prime networking
opportunities exist to entertain, enhance and expand your client base within the context of an independent discussion specifi c to your industry. Should you wish to join the increasing number of companies benefi ting from sponsoring our conferences please call: Alia Malick on +44 (0) 20 7827 6168 or email: [email protected]
MARKETING OPPORTUNITIESWant to know how you can get involved? Interested in promoting your services to this market?
Contact Teri Arri, SMi Marketing on +44 (0) 207 827 6162 or email: [email protected]
Offi cial Media Partners
Please complete fully and clearly in capital letters. Please photocopy for additional delegates.
Title: Forename:
Surname:
Job Title:
Department/Division:
Company/Organisation:
Email:
Company VAT Number:
Address:
Town/City:
Post/Zip Code: Country:
Direct Tel: Direct Fax:
Mobile:
Switchboard:
Signature: Date:I agree to be bound by SMi’s Terms and Conditions of Booking.
ACCOUNTS DEPT
Title: Forename:
Surname:
Email:
Address (if different from above):
Town/City:
Post/Zip Code: Country:
Direct Tel: Direct Fax:
Payment: If payment is not made at the time of booking, then an invoice will be issued and must be paid immediately and prior to the start of the event. If payment has not been received then credit card details will be requested and payment taken before entry to the event. Bookings within 7 days of event require payment on booking. Access to the Document Portal will not be given until payment has been received.Substitutions/Name Changes: If you are unable to attend you may nominate, in writing, another delegate to take your place at any time prior to the start of the event. Two or more delegates may not ‘share’ a place at an event. Please make separate bookings for each delegate.Cancellation: If you wish to cancel your attendance at an event and you are unable to send a substitute, then we will refund/credit 50% of the due fee less a £50 administration charge, providing that cancellation is made in writing and received at least 28 days prior to the start of the event. Regretfully cancellation after this time cannot be accepted. We will however provide the conferences documentation via the Document Portal to any delegate who has paid but is unable to attend for any reason. Due to the interactive nature of the Briefi ngs we are not normally able to provide documentation in these circumstances. We cannot accept cancellations of orders placed for Documentation or the Document Portal as these are reproduced specifi cally to order. If we have to cancel the event for any reason, then we will make a full refund immediately, but disclaim any further liability.Alterations: It may become necessary for us to make alterations to the content, speakers, timing, venue or date of the event compared to the advertised programme.Data Protection: The SMi Group gathers personal data in accordance with the UK Data Protection Act 1998 and we may use this to contact you by telephone, fax, post or email to tell you about other products and services. Unless you tick here □ we may also share your data with third parties offering complementary products or services. If you have any queries or want to update any of the data that we hold then please contact our Database Manager [email protected] or visit our website www.smi-online.co.uk/updates quoting the URN as detailed above your address on the attached letter.
Payment must be made to SMi Group Ltd, and received before the event, by one of the following methods quoting reference P-209 and the delegate’s name. Bookings made within 7 days of the event require payment on booking, methods of payment:
□ UK BACS Sort Code 300009, Account 11775391□ Wire Transfer Lloyds TSB Bank plc, 39 Threadneedle Street, London, EC2R 8AU Swift (BIC): LOYDGB21013, Account 11775391 IBAN GB75 LOYD 3000 0911 7753 91□ Cheque We can only accept Sterling cheques drawn on a UK bank.□ Credit Card □ Visa □ MasterCard □ American Express All credit card payments will be subject to standard credit card charges.
Card No: □□□□ □□□□ □□□□ □□□□Valid From □□/□□ Expiry Date □□/□□CVV Number □□□□ 3 digit security on reverse of card, 4 digits for AMEX card
Cardholder’s Name:
Signature: Date:I agree to be bound by SMi’s Terms and Conditions of Booking.
Card Billing Address (If different from above):
VAT at 20% is charged on document portal and literature distribution for all UK customers and for those EU Customers not supplying a registration number for their own country here.
______________________________________________________________________________________
If you have NOT received registration confi rmation within 48 hours of registering, please call +44 (0) 20 7827 6156
EARLY BIRD DISCOUNT
□ Please contact me to book my hotelAlternatively call us on +44 (0) 870 9090 711, email: [email protected] or fax +44 (0) 870 9090 712
I cannot attend but would like to purchase access to the following Document Portal/paper copy documentation Price Total□ Access to the conference documentation
on the Document Portal £499.00 + VAT £598.80□ The Conference Presentations – paper copy £499.00 - £499.00
(or only £300 if ordered with the Document Portal)
Unique Reference Number
Our Reference LVP-209 ts
DELEGATE DETAILS
Terms and Conditions of Booking
PAYMENT
VAT
CONFERENCE PRICES
DOCUMENTATION
VENUE Hyatt Regency, Mission Bay, San Diego, CA, USA
PRE-FILLED SYRINGES WEST COAST Conference: Monday 5th & Tuesday 6th June 2017, Hyatt Regency, Mission Bay, San Diego, CA, USA Workshop: Wednesday 7th June 2017, San Diego, CA, USA
4 WAYS TO REGISTEROnline at www.smi-online.co.uk/ts05.asp
FAX your booking form to +44 (0) 20 7827 6184PHONE on +44 (0) 20 7827 6185
POST your booking form to: Fateja Begum, SMi Group Ltd, Ground & First Floor, 1 Westminster Bridge Road London, SE1 7XW, UK
□ Book by 28th February to receive $300 off the conference price□ Book by 31st March to receive $200 off the conference price□ Book by 28th April to receive $100 off the conference price
I would like to attend: (Please tick as appropriate) Fee□ Conference & Workshop $2398.00□ Conference only $1899.00□ Workshop only $499.00
PROMOTIONAL LITERATURE DISTRIBUTION
□ Distribution of your company’s promotional
literature to all conference attendees $1598 + VAT $1917.60
The conference fee includes refreshments, lunch, conference papers, and access to
the Document Portal. Presentations that are available for download will be subject to
distribution rights by speakers. Please note that some presentations may not be available
for download. Access information for the document portal will be sent to the e-mail
address provided during registration. Details are sent within 24 hours post conference.