pre-qualification document - union rebar · pdf filepre-qualification documentindustrial city...

Pre-Qualification Document – All rights reserved 1Industrial City of Abu Dhabi (ICAD) | P.O. Box 39853, Abu Dhabi, UAETel: +971 2 5500177 | Fax: +971 2 5500199 | Email: [email protected]

PRE-QUALIFICATION DOCUMENT

Pre-Qualification Document – All rights reserved2

INDEX

SECTION PAGE

1. Company Profile………………………………………………………...…..3

2. Company Products & Services…………………………………………......8

3. Company Machinery………..……………………………………..…….....14

4. Quality………………………………………………………………….........19

5. Project Portfolio………………………………………………………….….27

7. Consultants Approval………………………………………………………37

10. Location map………………………………………………………………62

6. Company Registrations .........…………………………………………….35

8. Vendors ……………………………………………………………………...39

9. Legal Documents and Certificates………………………………………..41

Pre-Qualification Document – All rights reserved

3

1. INTRODUCTION


INTRODUCTION

Union Rebar Factory (URF), a subsidiary of IttihadInternational Investment LLC, was established in2005 with the sole objective of serving the mostdynamic construction industry in the UAE. URF ispredominantly focused on reinforcement steel, cutting& bending of steel rebar, and supply of allied basisbuilding material products like Timber, Plywood, Wiremesh, Cement etc.

URF is actively involved in trading straight steel bars and provides integrated reinforcingsteel solutions such as cutting & bending to its extensive network of clients. In addition, allreinforced steel is from various sources complying with most stringent internationalstandards.

The company also specializes in mechanical coupling systems & solutions, epoxy coatingand offers other engineering services on a wide spectrum of rebar works. This has beenone of the foremost reasons why URF has attained unparalleled levels of professionalexcellence, reliability, and quality in their business dealings.

Since its inception, URF testifies to its corporate philosophy by offering best-in-classservices, on time delivery and top quality products at the most competitive prices to itsclients across the 7 Emirates of the UAE.

URF has a capacity of 200,000MT/annum for fabrication of steel and 200,000MT forstraight bar trading in its factory covering an area of approximately 25,000 sq. mtr.

Backed by an outfit of more than 200 qualified professionals, URF provides professionalservices to its clients in the UAE and ensures services confirming internationally acceptedquality standards.


INTRODUCTION

URF is proud to be an ISO certified company lead by a professional team specializing inall functions of the industry with a well-structured Environment, Health and Safetyprocedures in place.

Over the years, URF has carved a niche as a trusted quality conscious organization,embracing the latest technologies and working techniques in all its activities including FieldWork, Administration and Project Management.

Union Rebar

ReinforcementSteel

BRC Mesh

Cutting &Bending ofSteel Rebar

Timber andPlywood


VISON AND MISSION

Vision

Aspire to become a leader of Rebar & cut andbend steel supplier in the whole of UAE

Mission

To strive to become a renowned supplier in theconstruction industry providing supreme QualityProducts & Services.

To achieve unparalleled levels of professionalexcellence, reliability and quality in all businessdealings.

To create healthy and professional workenvironment for employees fostering teamwork andleadership qualities.

To collectively strive for excellence to set ToweringStandards.

Pre-Qualification Document – All rights reserved 7

ORGANIZATIONAL CHART


2. COMPANY PRODUCTS & SERVICES


COMPANY PRODUCTS & SERVICES

Union Rebar Factory has set unparalleled professional quality standards in their businessdealings, services and products. As a result their Clients, Contractors and TradingPartners benefit from dealing with a professional organization that believes in deliveringquality on time. URF services are tailor-made to cater all needs of complex and ultra-modern projects.

Union Rebar Services

• Supply of reinforced steel from various sources complying with internationalstandards

• Engineering services including design and detailing services for Rebar

• Accurate cut and bend reinforcing steel supply & project in conformance to standards

• Epoxy Coated reinforcing steel to ensure the corrosion protection, includingfabrication

• Mechanical coupling system and solutions for Rebar

• Supply of various types of shuttering Marine Plywood

• Supply of White Wood

• Fabrication and supply of Wire Mesh


PRODUCT SPECIFICATION

SPECIFICATIONS OFSTEEL BS 4449 GRADE 500 TYPE B

SIZE (MM) 8, 10, 12, 14, 16, 20, 25, 32, 40

TYPE

12m Straight Bars (Black and epoxy coatedsteel

Cut & Bend Coupler and Threading Materials c a n be Epoxy Coated or Normal steel bar

MAJOR MILLS &SUPPLIERS

UAE Origin Mills- Emirates Steel Industry- Conares Metal Supply- Hamriyah Steel

Turkish Manufacturing Mills- Habas- Kroman- ICDAS

Jindal Shadeed Oman


MANUFACTURING & TRADING OF WIRE MESH

Mat MatPitch Wire Size Section Mass

Main Main Main Cross Main Cross Mat M2

Size Typemm mm Cm/M2 Kg

Square Mesh

4.80x

2.40

A565 200 200 12 12 5.65 102.3 8.88

A393 200 200 10 10 3.93 3.93 71.0 6.16

A252 200 200 8 8 2.52 2.52 45.5 3.95

IA193 200 200 7 7 1.93 1.93 34.8 3.02

A142 200 200 6 6 1.42 1.42 25.6 2.22

A98 200 200 5 5 0.98 0.98 17.74 1.54


SUPPLY OF PLYWOOD & TIMBER

Union Plex shuttering / marine plywood is produced as union branded product withstringent quality of manufacturing in order to provide durability for multiple uses in concretecasting. To extend and add value to our clients along with steel supply, we also handleconstruction grade Timber and Plywood.

The range includes all sizes of white wood imported from Romania and shuttering plywood(marine) in 5 types of quality range.

Uni Plex

Union Plex

Petra Plex

Union Pro

Q-PlexWe propose to add more range of product in this category in future.

Supplying Film Faced Plywood, Romanian White wood


SUPPLY OF PLYWOOD

Specifications

Shuttering / Marine Plywood 13 ply with Dyna Film Face 120g / m

Combi Core Wood 18mm thickness WBP Phenolic Glue

Water resistant coat for edge sealing Main use: Shuttering / Concrete Casting

CharacteristicsUnitof

MeasureTest

MethodValue Result

Moisture Content % En 322 6.82 Approved

Density Kg/m3 En 323 582 Approved

Longitudinal Module ofElasticity

Map En 310 6798 Approved

Lateral Module of Elasticity Mpa 6798 Approved

Longitudinal BendingStrength (N/mm)

Mpa

En 310

63.6 Approved

Lateral Bending Strength(N/mm)

Mpa 46.8 Approved

Bondin Bonding Quality En 314 Max: 1.65Mini: 84

Approved Approved

Pre-Qualification Document – All rights reserved14mm

3. COMPANY MACHINERY


URF MACHINERY

Cutting Line

Fully automated cutting cycles are programmed,stored and controlled by a dedicated industrialcomputer which can be interfaced with remotePCs. These machines are manufactured by one ofthe best European manufacturers using the latesttechnology in Steel cutting

Automatic Bending Machine

URF is equipped with the latest bendingmachines capable of carrying out all formingoperations on iron bars for reinforced concretein fully automatic cycle. The working operationcan be performed in automatic, semi-automaticor manually


URF MACHINERY

Stirrup Machine

Automatic Stirrup Bender, bidirectional,electronically controlled for the production ofsmall and medium sized stirrups, able toproduce cut to length bars, as well asbent/shaped bars with bends on one side, up toa length of 12m.The Straightening technology guaranteesmaximum flexibility and quality within specificproduction requirement.

Threading Machine

The Dextra machines used for the threadingforged ends of reinforcement bars perfectlyconnecting with Dextra couplers. This machineis designed to cut rebar threads different sizesranging from 12mm-40mm diameters


ABU DHABI FACTORY MACHINERY LIST

Cutting Line 4 Nos.: OSCAM Multiline T530 Shear Line

Automatic BendingMachine

6 Nos.: OSCAM Bending Machine Model L1 5 Nos.: OSCAM Bending Machine Model K 2 Nos.: OSCAM Bending Machine Model K2 5 Nos.: OSCAM Futura/2 Robot Bending System

Stirrup Machine

1 Nos.: MEP Stirrup Bender Machine Concept 91 2 Nos.: MEP Bending Machine Focus 12' 1 Nos.: OSCAM Spiral Machine "86 2R" 1 Nos.: Progress Machine 3D- 16A

Threading Machine 2 Nos.: DEXTRA Bartec Threading Machine 5 Nos.: LENTON Threading Machine

Overhead Cranes Konecranes 10 Ton Double Overhead crane

with 2m Duty Konecranes 8 Ton Double Overhead crane

with 3m Duty

Mobile Crane Tadano Crane TL 300 E

Gantry Crane Two Hoiste

Forklift 2 Nos.: CAT Forklift /TCM


DUBAI FACTORY MACHINERY LIST

Wire Mesh Set 1 Nos.: Cold Rolling Machine DEM 2017 5 Nos.: DELISI Straightening Machine 2 Nos.: EVG Wire Mesh Welding Machine

Cutting Line

1 Nos.: Schnell Shear Line Omes Shear Line Full Set 1 Nos.: Double Bender 2 Nos.: Single Bender 2 Nos.: Double Bender 4 Nos.: Single Bender

Automatic BendingMachine 5 Nos.: Bending Machine

Stirrup Machine 1 Nos.: Schnell Stirrup Bender Machine Concept 91 2 Nos.: Schnell Bending Machine

Threading Machine 1 Nos.: DEXTRA Bartec Threading Machine 2 Nos.: LENTON Threading Machine

Overhead Cranes 6 Nos.: DEMAG Konecranes

Mobile Cranes 2 Nos.: Tadano Crane TL 300 E

Forklift 2 Nos.: CAT Forklift


4. QUALITY


QUALITY

Union Rebar Factory (URF) is very well equipped to fabricate the reinforcing steelbars in consistently accurate manner complying with the projects' standards andspecification. Union Rebar Factory by applying high quality management proceduresensures that rebar purchasing, storing, epoxy coating, fabrication, bundling, tagging,loading and transportation are being carried out according to the international standardsand quality requirements. We also guarantee the perfect traceability for the rebar,starting from the manufacturer, passing through our factory and ending up at theproject site. Moreover, in case of epoxy coated rebar requirements, strict procedures areapplied to our coater to maintain the same level of perfect traceability.

ISO Certification:On 23th June, 2010, URF was officially announced an ISO certified company in thefollowing categories (by TUV SUD Germany):

EN ISO 9001:2008 - Certified for standards in quality management systems

EN ISO 14001:2009 - Certified for standards in environmental managementsystems

OHSAS 18001:2007 - Certified for standards in occupational health & safety{OH&S) standards


QUALITY

URF is well equipped to fabricate reinforcing steel barsconforming to the required standards and specifications ofthe Awarded Projects.

URF emphasizes on the quality and accuracy of the cut &bend operations as it is a vital factor in any project. Allfabrication activities are carried out according toBS8666:2000 or to the precise project specification.

URF provides steel with high quality manufacturing strictly from approved manufacturing millsaround the world produced with the highest standards and specifications.

URF applies the following procedures to ensure the entire quality aspects for supply of the reinforcingsteel bars:

A. GeneralA.1. Receipt the Rebar from the Source:

Upon the receipt of the rebar bundles from the manufacturer supervisor visually inspects thefollowing:

o Steel in bundles are not twistedo Steel is not discoloredo Bundles are properly tagged and matching with the Mill test certificate

The rebar bundles will then be unloaded and stacked properly using power lift equipment’sin stacking area keeping the bundles straight aligned

The stacked reinforcing steel shall always be kept totally protected and covered by heavyduty water-proof tarpaulin covers

No tag is allowed to be removed from any bundle in the storage area


QUALITY

A.2. Rebar Fabrication and Delivery:

URF emphasizes the quality and accuracy of cuttingand bending operations as vital factors to the projectprogress to ensure proper fit on site and perfectmatching to the required standards. Thus, followingquality procedures are followed in the productionprocess:

All fabrication activities are carried out according to 858666:2000 or to the specificproject specifications if exist. Lengths and shapes shall be as per the customer'sapproved order and BBS

Bars are cut to the required lengths using the very accurate automated shear lines.Cast numbers for opened bundles are immediately shifted to the cutting list for allcut bars

Cut bars are bent using either the automatic bending machines or our fullyautomated robot bending systems based on the length, shape and size

Fabricated bars shall be grouped, bundled and properly tagged. Cast numbers willbe shifted from the cutting list to all related tags that will also maintain all other barmark information

Fabricated rebar bundles will eventually be loaded and delivered according to thecustomer's schedule. They are placed on the trailer properly to ease the unloadingprocess and to satisfy the secure transport and traffic regulations.

A delivery note, BBS showing all loaded bar marks, and the related mill testcertificates are provided to the customer with all deliveries


QUALITY

A.3. Traceability:

During all activities Union Rebar Factory assures thefull traceability for the reinforcing steel so all batches ofeither straight or fabricated bars can be traced back tothe original mill test data.

-Perfect traceability for the straight bars is achieved bymatching the cast number mentioned on the bundle'stag with the related manufacturer's mill test certificate.

- A delivery note and related mill test certificates are provided to the customer for all epoxystraight rebar bundles

-For the fabricated bars; (please refer to A.2.).

B. Epoxy Coated Reinforcing Steel Bars

Epoxy coated reinforcing steel bars shall be dealt more carefully. Following are the basicsteps Union Rebar Factory follows at all stages in dealing with the epoxy coatedreinforcing steel to ensure the corrosion protection benefits of the epoxy coated re bar:

B.1. Sending the rebar bundles for coating:

Prior to loading, proposed rebar bundles are visually checked. They shall bestraight aligned and their surfaces shall be suitable for epoxy coating

A delivery note showing the loaded quantity information including bundles'numbers and their related cast numbers will be issued from Union Rebar Factoryto the coater


QUALITY

B.2 Receipt of epoxy coated steel from the coater:-We receive back the same rebar bundles epoxycoated and carefully loaded onto the trailer with nylonstraps, placed on and separated by wooden timbers.-Before unloading the bundles we check for thefollowing:o Proper padding and separations for the bundles

o Same original tags shall be attached in addition to the coaters’ tags. Thecoater shall provide a certificate of guarantee and in-house inspectiontest report each load along with the delivery note

o Visual inspection for epoxy coating damages. The ties shall be secure forunloading

- If epoxy coated bundles pass our initial inspection. Our staff starts unloading thebundles very carefully using power lift equipment’s hanging each bundle by ropestrings from three points (i.e. one in both sides and one in the middle) taking intoconsideration that the coated bundles do not come in contact with the bare metal orrough surface of the trailer to avoid any damages. No chains or bare cables areallowed for unloading the epoxy coated bundles.

B.3. Storage:

The epoxy coated bundles are stacked over wooden supports close together toavoid sagging

It is not allowed under any conditions that the epoxy coated bundles beingstacked on the ground or on any other unprotected surface

The stored epoxy coated bundles will again be covered with nylon covers

B.4. Fabrication:When start fabrication for the epoxy coated reinforcing steel, following steps are strictlyfollowed in our factory to avoid damages for the epoxy coating:


QUALITY

Any bundle to be used shall be shifted from the stacking area very carefully usingthree points hanging rope strings. It shall be placed as close to the working areaas possible over wooden timbers or Teflon covered surfaces

All machinery surfaces exposed to contact with the epoxy coated rebar during theproduction cycle shall be entirely covered with Teflon sheets

All bending pins shall be protected with specialized PVC mandrels

All spirals are produced using drums wrapped with flexible heavy-duty rubber

No contact between the coated rebar and bare surfaces is allowed

All finished products shall be properly repaired for cutting ends and any scratches,stacked over wooden supports, grouped and tied in bundles over nylon protectionsheets and tagged to become ready for loading and delivery

Other quality procedures and applied standards shall be as per (A.2. rebarfabrication and delivery)

B.5. Final Inspection and Repairs:Once a coated rebar is fabricated, a final inspection is made to repair all cutting ends andany handling scratches using the specialized epoxy repair-kit. In repairing the damagedareas, we follow the following procedures:

Repair mixture is prepared as per the manufactures instructions

The scratches areas are carefully cleaned with wire brush to remove allcontaminants prior to applying the repair mixture

The repair mixture is applied carefully to the cleaned scratched areas using a paintbrush in sufficient overlap with the adjacent coating

Applied repair mixture is left for a sufficient time as mentioned in themanufacturer's instructions to allow proper hardening

B.6. Loading and transportation:

Loading, as in unloading and shifting during fabrication, shall be always carried outusing rope strings and no chains or bare cables are allowed


QUALITY

Placing onto the trailer shall be over wooden supports close together to avoidsagging. It is not allowed under any conditions that the epoxy coated bundles beingloaded on the bare surface of the trailer

Epoxy coated bundles shall be properly separated by wooden timbers and tieddown by rope strings to avoid movements and friction during transportation to theproject site.

Strict instructions are given to our drivers to drive carefully and smoothly to avoidbundles movements and rebar friction on the road.

B.7. Traceability:During all supply stages for the epoxy coated reinforcing steel, Union Rebar Factoryassures the full traceability, so all batches of either straight or fabricated bars can betraced back to the original mill test data.

Perfect traceability for the straight epoxy coated rebar bundles is achieved bymatching the cast number mentioned on the bundle's tag with the relatedmanufacturer's mill test certificate upon receiving the steel from the manufacturer,sending it for epoxy coating, receiving it back from the coater and deliveryto the project site. (Please refer to B.1.and B.2.).

For the fabricated epoxy coated reinforcing steel bars; (Please refer to B.4.).

For some specific prestigious projects, we assign a representative fromour side to witness all epoxy coating process in the coater's factory to avoidany probability of rebar mixing. This will be followed in “Saadiyat BridgeProject".

B.8. Recommendation to Our Customers:However that unloading, storing, placing, and concreting the epoxy coated rebar is theresponsibility of our customer, we advise them to strictly follow our above mentionedquality plan and procedures in dealing with the epoxy coated bars at the project siteduring all activities. In addition to the above, we emphasize that using common senseprecautions and some extra care will eliminate most damages in the epoxy coatedrebar starting at the epoxy coating factory passing through the URF and ending at theproject site.


5. PROJECT PORTFOLIO


CURRENT PROJECTS IN PROGRESS

Major Current Projects in Progress for Supply of Reinforcement Steel Cut & Bend

No Year(s) Project Name Consultant Name Main ContractorProject

LocationApprox. Qty.

(MT)Approx. Value

(Million)

1 2014-2015-2016Al Habtoor CityRes. 3 Towers

Atkins Dubai 55,000 105

2 2015-2016 Wafi MallArkiteknik InternationalConsulting Engineers Al Fara'a Group Dubai 20,000 38

3 2016-2017 Parkview MZ Architects Al Mansouri LLC Abu Dhabi 13,000 24.7

4 2017Midfield Terminal Abu

Dhabi AirportKPF & ARUP

ConsolidatedContracting Eng. &

ProcurementS.A.L - Offshore

Abu Dhabi 18,000 34.2

5 2015-2016Nakheel Mall @ Palm

Jumierah TowerWME UNEC/ACTCO JV Dubai 35,000 66.5

6 2015-2016 The Atria TowerAK Design ECC

EngineeringConsultant Group

Al Rostamani PegelLLC

Dubai 14,000 26.6

7 2015-2016 The Palm Tower Hotel WME UNEC/ACTCO JV Dubai 10,000 19

Al HabtoorLeighton Group





LocationApprox.

Qty. (MT)Approx. Value

(Million)

8 2015-2016 Plaza View ProjectAl Bayaty Architects

& Engineering Al Fara'a Group Abu Dhabi 5,000 9.5

9 2014-2016 Barrari 12 Towers ALAJMIDelta Emirates

ContractingDubai 8,000 15.2

10 2015-2016 Al Fattan Sky Tower AE7Delta Emirates

ContractingDubai 4,000 8

11 2015-2016Jumeirah Hills

Development 60Villas

Design & ArchitectureBureau

Al Basti & Muktha Dubai 3,000 6

12 2016-2017 SPS Mamsha RTKL (An ArcadisCompany)

Pivot/San Jose –SPS Mamsha

Abu Dhabi 21,000 36

13 2016-2017 Palm TowerArchitectural Interior

RSP Design,Architectural Planner

& Engineers

Trojan GeneralContracting

Dubai 10,000 19

14 2016-2017Hydra Avenue

Tower PII Prime EngineeringTrojan General

ContractingAbu Dhabi 5,000 9.5





LocationApprox.


(Million)

15 2016-2017 EREC Building DEC EngineeringConsultancy

Emirates LinkMaltauro

Abu Dhabi 5,000 9.5

16 2016-2017 Nad Al Shiba Villas Arif & BintoakConsulting


Dubai 5,000 11.4

17 2016-2017 Mudon Development NAGATrojan General


18 2017Deira Waterfront Mixed

Use DevelopmentAE7

SsangyangTrojan JV

Dubai 9,000 17

19 2016-2017Al Fattan Tower

Downtown, DubaiAE7

Ali Mousa & SonsContracting

Dubai 16,000 30.4

20 2016-2017DAMAC Carson Tower

– 3 TowersArchitecture Interior

Design Urban PlanningAl Arif


21 2016-2017 Aluminum Refinery BPJVNASS

ContractingAbu Dhabi 8,000 16


LIST OF COMPLETED PROJECTS

Recently Completed Projects for Supply of Reinforcement Steel Cut & Bend


LocationApprox.


(Million)

1 2014Bloom Central Zone

W-13/01Herberger Engineering

ConsultantShapoorji Pallonji

Mideast LLC Abu Dhabi 9,000 23

2 2014Fairmont Hotel & Serviced

ApartmentsKhatib & Alami

ArabtecConstruction LLC

Abu Dhabi 8,000 19.4

3 2015-2016 Commercial Bldg. Pam Emirates Consultant Emirates Belbadi Abu Dhabi 6,000 12

4 2014-2015- 2016STEP Pumping Station PS-

01- Al WathbaMott McDonald Odebrecht Abu Dhabi 5,000 12.7

5 2015G+7 Golf Apartment Bldg. at

AKOYA by DAMACAECOM

TransemiratesContracting

Dubai 5,000 11

6 2014Commercial & Residential

Bldg., C40 - RawdhatBBS

Ali & SonsContracting

Abu Dhabi 2,500 4.75

7 2015 Beutat Tower MAZAYA Modern Building Sharjah 2,500 4.8





LocationApprox.


(Million)

8 2014-2015 Duja Tower NEBGeneral

ConstructionAbu Dhabi 2,500 4.75

9 2014Marina Bloom Development, -

Al BateenKhatib & Alami

Al Shafar GeneralContracting

Abu Dhabi 14,000 32

10 2015Palm Jumeirah

Gold Mile ProjectArif & Bintoak


Dubai 2,000 3.8

11 2014-2015 Nestle Factory DAR Al HandssahAl Shafar General


12 2015 Akoya by Damac BBSSEIDCO Gen.Contracting

Dubai 2,000 3.8

13 2014-2015-2016 DAMAC Tower by Paramount KEO International Consultant TAV Construction Dubai 30,000 65

17 2016-2017 Al Fattan Tower AE7 Delta EmiratesContracting

Dubai 6,000





LocationApprox.


(Million)

14 2015-2016 Prive by DamacLACASA Architect &

EngineeringConsultant

SEIDCO Gen.Contracting

Dubai 7,000 13.3

15 2014-20155Towers Residence

Bldg. at DubaiSilicon Oasis

Arch GroupBu HaleebaContracting

Dubai 6,000 10.5

16 2016-2017 Al Fattan Tower AE7Delta Emirates


17 2015-2016 Damac AYOKA Park NAGADelta Emirates


18 2015-2016United SquareDevelopment

EHAF ConsultingEngineers


Abu Dhabi 14,000 28

19 2015-2016 Wafra Development KEO InternationalConsultant


Abu Dhabi 6,000 12

202014-2015

Al Jaddaf ProjectNational Engineering

BureauAB Building Dubai 4,500 9

2016-2017 Al Fattan Tower AE7 Delta EmiratesContracting

Dubai 6,000





LocationApprox.


(Million)

21 2015-2016 Wafra DevelopmentKEO International

ConsultantSEIDCO Gen.


22 20132000 Villas, AlAin Al Fayda

KEO InternationalConsultant


Al Ain 5,000 10

23 2014 AWQAF TowerHeberger EngineeringConsulting Engineers

Al Fara'a Group Abu Dhabi 6,200 12.4

24 2014Al Jaddaf

Golden BoxARENCO Modern Building Dubai 1,000 2

25 2014 Landmark HeadquarterTower

Archgroup Shapoorji PallonjiMideast LLC

Dubai 10,000 20

17 2016-2017 Al Fattan Tower AE7 Delta EmiratesContracting

Dubai 6,000


6. COMPANY REGISTRATIONS


COMPANY REGISTRATIONS

TO WHOM IT MAY CONCERN

This is to certify that Union Rebar Factory LLC is registered supplier of certifiedreinforcement steel from approved manufacturers with the following Institutions.

COMPANY REGISTRATION NO

Abu Dhabi Oil Refining Company{TAKREER)

907449

Abu Dhabi National Oil Company (ADNOC)905101

Abu Dhabi Municipality00000447

Zakum Development Company ( ZA DCO )32074

Abu Dhabi Company for Onshore OilOperations ( ADCO)

15397

For further information, please feel free to contact us.

On Behalf of:

Union Rebar Factory L.L.C.


7. LIST OF CONSULTANT APPROVAL’S


LIST OF CONSULTANT APPROVAL’S


No Project NameConsultant’s

NameClient’s Name

MainContractor’s

NameYear

1

Al Habtoor CityResidence3 Towers

AfkinsAl Habtoor

Leighton GroupAl Habtoor

Leighton Group2014

2

WAFI HotelComplex & Mall

Expansion Dubai

Arkiteknik Int.Cons. Eng.

MKM CommercialHolding LLC

Al Fara’a Group 2015

3 Parkview MZ ArchitectsBLOOM

PropertiesAl Mansouri 3B

LLC2016

4

MedfieldTerminal

Abu DhabiAirport

KPF & ARUPAbu Dhabi

AirportsCCC 2017

5

Nakheel Mall @Palm Jumeirah

TowerWME

NakheelProperties

UNEC-ACTCO JV 2015

6The Palm Tower

HotelWME

NakheelProperties

UNEC-ACTCO JV 2015

7 The Atria TowerAK Design ECC

Eng. Cons. Group

DeeyarDevelopments

PJSC

Al RostamaniPegel LLC

2015

8Plaza View

ProjectAl Bayaty Arch. &

EngineeringTMKN Property Al Fara’a Group 2015

9Barrari 12

TowersALAJMI

Tanmiyat GlobalReal Estate

Development LLC

Delta EmiratesContracting

2014





NameClient’s Name

MainContractor’s

NameYear

10 Al Fattan Sky Tower AE7Al Fattan

PropertiesDelta Emirates

Contracting2015

11

Jumeirah HillsDevelopment

60 Villas

Design & Arch.Bureau

Jumeirah HillsDev't LLC

Al Basti & Muktha 2015

12 SPS Mamsha RTKL AssociatesTourism Dev. &Inv. Company

Pivot/San Jose-SPS Mamsha

2016

13 Palm TowerArchitecturalEngineers

Nakheel EmiratesTower


2016

14Hydra Avenue

Tower PIIPrime

EngineeringHydra Properties


2016

15 EREC BuildingDEC Eng.

ConsultancyEmirates RealEstate Corp.

Emirates LinkMaltauro

2016

16 Nad al Shiba VillasArif & Bintoak

ConsultingNakheel Emirates

TowerTrojan General

Contracting2016

17 Mudon Development NAGA Dubai PropertiesTrojan General

Contracting2016

18Al Fattan Tower

DowntownAE7

Al FattanProperties LLC

Ali Mousa & SonsContracting

2016

19DAMAC CarsonTower 3 Towers

ArchitectureInterior DesignUrban Planning

Damac Crescentproperties LLC

Al Arif Contracting 2016

20 Aluminum Refinery BPJVEGA (Emirates

Global Aluminum)NASS

Contracting2016





NameClient’s Name

MainContractor’s

NameYear

21

MBR City District 1-Phase1, Community

9&10AE7

Merydan SobhaLLC FZ

MS ConstructionLLC FZ

2016

22Kings College

HospitalWME

KCH HealthcareLLC

Shapoorji PallonjiMideast LLC

2017

23Bloom CentralZone W13/01

Herberger Eng.Consultants

Bloom PropertiesShapoorji Pallonji

Mideast LLC2014

24Fairmont Hotel &

Serviced ApartmentsKhatib & Alami

NationalInvestment

Corporation (NIC)

ArabtecConstruction LLC

2014

25

STEP PumpingStation PS-01,

Al WathbaMott McDonald

Abu DhabiSewerageServicesCompany

Odebrecht 2014

26

G+7 Golf ApartmentBuilding at AKOYA

by DAMACAECOM

DAMACProperties

TransemiratesContracting

2015

27 DUJA Tower NEBNaseer Abdulla

Lootah RealEstate

GeneralConstruction

2014





NameClient’s Name

MainContractor’s

NameYear

28Marina BloomDevelopment

Khatib & Alami Bloom PropertiesAl Shafar General

Contracting2014

29DAMAC Tower by

ParamountKEO International

ConsultantDamac Star

Properties LLCTAV Construction 2014

30 PRIVE by DAMACLACASA Architect& Eng. Consultant

NAMAAProperties

Development LLC


2015

31

5 Towers ResidenceBldg. at DubaiSilicon Oasis

Arch GroupMoh’d Bin Rashid

Housing Est.Bu HaleebaContracting

2014

32 Al Fattan Tower AE7Al Fattan

Properties LLCDelta Emirates

Contracting2016

33United SquareDevelopment

EHAF ConsultingEngineers

InternationalCapital Trading


2015

34 Wafra DevelopmentKEO International

ConsultantAl Wafrah Real

Estate CompanySEIDCO Gen.

Contracting2015

35Landmark

Headquarter TowerARCH Group

Landmark AssetHolding Limited

Shapoorji PallonjiMideast LLC

2014

36Akoya Oxygen

134 VillasECCE

Frontline Inv. Mgt.Co. LLC

Hadeed EmiratesContracting

2017

37Al Jimi Mall Phase

3 DevelopmentACG ALDAR Pivot Engineering 2015

38Hotel Apartments &Residential Building

CV Tec ConsultingEngineers

AZIZIGhantoot Gulf

Contracting2016





NameClient’s Name

MainContractor’s

NameYear

39Hydra Village,

Abu DhabiNEB Engineering

ConsultancyHydra Properties


2015

40

Citizens AffairsDivision Building,

Abu DhabiARMSTRONG

Crown PrinceCourt

ARABTECConstruction

2016

41 The Constellation MeinhardtUrban Planning

CouncilAl Fara’a Group 2015

42West Yas

ResidentialJLA International

EngineeringALDAR

ArabtecConstruction

2016

43The Residences at

Marina Gate 1ECCE Select ALEC 2016

44R989 Access to

Blue waters IslandParsons Overseas

LimitedRoads & Transport

AuthorityAl HabtoorLeighton

2015

45

Improvement ofMafraq to al

Ghwaifat BorderPost Highway

Dorsch Gruppe DCAbu Dhabi

MusanadaAl Jaber

Transport & Gen.Cont. LLC

2016

46Reem Development

Cont. of MiraTownhouse

Al GURGConsultants

EMAAR PropertiesPJSC

ArabtecConstruction

2014

47

Arabian Ranches -2Development Palm

Community

Al GURGConsultants

EMAAR PropertiesPJSC

ArabtecConstruction

2015

48 Akoya Park Phase 1 AECOM DAMACDelta Emirates

Contracting2014


SAMPLE OF CONSULTANT’S APPROVAL

o Contractor: Consolidated Contracting Engineering & Procurement S. A. L – OffshoreProject Name: Automated People Mover Head House Phase 1, Abu Dhabi Airport



o Contractor: PIVOT San Jose JVProject Name: SPS Mamsha Saadiyat Phase 1, Abu Dhabi



o Contractor: Al Habtoor Leighton Group LLCProject Name: Al Habtoor City Residence, Dubai

2 Towers (73 Storeys) & 1 Tower (55 Storeys)



o Contractor: UNEC - ACTCO JVProject Name: The Nakheel Mall - Palm Jumeirah, Dubai



o Contractor: TAV ConstructionProject Name: DAMAC Tower by Paramount, Dubai


8. VENDOR’S LIST


VENDOR’S LIST

Emirates Steel

Hamriyah Steel

Turkey Steel – Habas, ICDAS & Kroman

Conares Steel

Jindal Shadeed

Note: Detailed Product Submittal for Consultants Approval will be submitted in the materialsubmittal separately as per request


9. LEGAL DOCUMENTS & CERTIFICATES


INDUSTRIAL LICENSE


ON SHORE & OFF SHORE LICENSE


ISO 9001:2008 CERTIFICATE


ISO 14001:2004 CERTIFICATE


BS OHSAS 18001:2007 CERTIFICATE


EHS APPROVAL


MINISTRY OF PUBLIC WORKS


OSHAD CERTIFICATE


DUBAI MUNICIPALITY APPROVAL

Ministry of Economy

61

Ministry of Interior

62

Pre-Qualification Document – All rights reserved

LOCATION MAP AND CONTACT DETAILS

Address:

Industrial City of Abu Dhabi (ICAD)P.O. Box 39853, Abu Dhabi, UAETel: +971 2 5500177Fax:+971 2 5500199Email :[email protected]

THANK YOU63