premium_planetary gears.pdf

8/22/2019 PREMIUM_PLANETARY GEARS.pdf

1/81

PLANETARY DRIVES

1


2/81

Introduction

Greaves GP series planetary gearboxes in single/ double/ triple/ quadruple

reduction models are intended to satisfy all the requirements of a reliable drivefor slow speed high torque applications. Standard range of Greaves GP series

available in foot mounted and flange mounted versions, offer unparallelperformance covering ratio graduated from 3.75/1 to 2354/1 with power ratings

ranging from 0.12Kw to 1500Kw.

Greaves range of GP series planetary gearboxes and geared motors are

designed, engineered and manufactured as per the standard recommendations

of American Gear Manufacturers Association (AGMA).

This catalogue contains specifications, dimensions and ratings for standard GP

series. Our engineers will be pleased to assist in case of unusual conditions

attracting special requirements.

Salient Features

Greaves GP series gearboxes are efficient, rugged, reliable andmaintenance free. They are compact and have high power to weight

ratio.

Greaves GP series gearboxes enable the users to save on power,cost of lubricant and cost on structurals.

Greaves GPseries gearboxes are provided with two-ball bearingsper planet gear (in high speed stage) resulting in longer life of the

sun/planet gear and pins.

The planet mounted firmly between the carrier and the cageplate to avoid overhung of the planet gear on the carrier pin. Thus

eliminating the possibility of the failure of sun and planet gears.

Material Of Construction

Sun & Planet Gears: Manufactured from high quality alloy case

hardening steel for long life, wear resistant and fatigue strength.

Ring Gear: Manufactured from high alloy steel, nitride hardened to

absorb impact loads and provide desired wear resistance.

Gear Housing: Manufactured from nodular cast iron/cast steel/mild steelaccording to the power to be transmitted. Are designed rigidly to absorb

vibration and support reactionary loads.


3/81

Bearings: Ball bearing/ Needle bearings of reputed make used for the

planet gear. Depending on the speed and power to be transmitted,Input/Output shafts are mounted on Taper roller/ Ball bearing/ Spherical

roller bearings of appropriate size for longer life.

Shafts: Manufactured from through hardened alloy steel, with optimum

diameter as per IS standard for transmitting maximum torque.

Shaft Seals

Shaft extensions are fitted with spring loaded nitrile rubber seals toprevent outflow of oil. In case of flange mounting units with output shaft

projecting downwards, double nitrile rubber seals are provided foreffective sealing.

Lubrication

Lubrication of Gears and Bearings is entirely self-contained by automatic

splash which provides ample and positive flow of oil resulting minimumwear and noise. Recommended oil is of ISO: VG 320 viscosity grade with

EP additives. No special care is required except occasional topping up ofthe oil to specified quantity. All units are provided with combined dipstick,

ventilator and drain plugs.

In some cases, it is necessary to use a forced lubrication system with a

separate oil tank. These are marked in the rating tables.Since the gearbox is supplied without oil the casing should be filled withthe correct quantity of recommended oil before running.

Electrical

Electric motors provided with Greaves planetary geared motor is TEFC,

squirrel cage induction motors suitable for operation on 415V(+/-10%),3phase, 50c/s (+/-5%), AC supply with IP protection and class F

insulation (utilized to class B limits). Units with electric motor of specialdesign e.g. flameproof construction, crane duty motor, extended shaft

motor, motor with built in electromagnetic bake etc. can be offeredagainst specific requirements.

Mechanical Ratings & Service Factors

Greaves GP series planetary gearboxes are designed for steady loading

with fairly small mass acceleration, which includes periodic momentary


4/81

overloads up to four times per hour to an extend of 100% (starting or

braking). When used under such operating conditions (i.e. on continuousduty with occasional peak loads), it is not necessary to increase the size

for an additional service factor.

If the unit is subjected to sustained overloads or to shock loads, thesemust be reflected in the chosen service factor. If overloads can be

calculated or estimated then the actual loads should be used instead offactor. When detailed operating conditions are not available table 3,

gives a guide to the load characteristics of many variedapplications, and should be used to determine appropriate service

factors from table 1.

Table 1-Mechanical Service Factor

Load classification driven machine

Prime Mover

Duration ofservice-hrs perday

Uniform Moderate

shock

Heavy

shock

Electric motor,Steam turbineor Hydraulic

motor

Under 33 to 10

Over 10

0.81.00

1.25

1.001.25

1.5

1.51.75

2.00

Multi-cylinder

internalcombustion

engine

Under 3

3 to 10

Over 10

1.00

1.25

1.5

1.25

1.5

1.75

1.75

2.00

2.25

Single cylinder

internal

combustionengine

Under 3

3 to 10

Over 10

1.25

1.5

1.75

1.5

1.75

2.00

2.00

2.25

2.5

When selecting units use the actual load transmitted and not the rating ofthe prime mover, and wherever possible use output torque (Nm).

Catalogues also give input power (Kw), being the power, which the primemover must provide to allow for losses in the gear unit.

Thermal Rating

Thermal rating measures the units ability to dissipate heat. If they areexceeded the lubricant may overheat and breakdown, with consequent life

failure. Both mechanical and thermal ratings are given for all units.

Thermal ratings are affected by ambient temperature and not bymechanical considerations such as increased running time or shock loads.Cataloque ratings assume 40 degree Celsius ambient temperature, the oil

temperature then rising as the units transmit power and generate heat.

If the ambient temperature is more than 40degree Celsius, a lowertemperature rise is allowed therefore less power may be transmitted.

Similarly in cooler temperatures the thermal rating may be exceeded.


5/81

When selecting units use a service factor from Table 2 to calculate

equivalent loads.

For intermittent running with ample cooling time during rest periods,

thermal ratings maybe exceeded without overheating.

Table 2 - Thermal Service FactorAmbient Temp. Deg C 20 30 40 50

Service Factor 1.4 1.2 1 0.8

Selection Procedure

The preliminary selection of a GP unit can be made from the powerratings specified in the selection charts. Once the preliminary selection

has been made the external influencing factors must be taken into

consideration. Torque demanded by the application should not exceed thelimits specified.

In case of an electric motor of 4P/6P/8P,the unit rated for the input speedand the torque can be directly selected from the selection table. The next

step is to consider the service factors (Both Mechanical & thermal)demanded by the application. Refer table of service factors (Table 1 & 2)

for the same. Then the unit selected should satisfy the followingrelation.

Pi x Sf< or = Pr

Where Pi = Input power in Kw

Sf = Service factor selected

Pf = Rated power of the unit specified in the chart

In all the case of an oil-hydraulic motor the following formula may

be used to determine the input torque (Ti)

Ti = V x P x Eh Nm

62.86

Where V = Displacement of the hydraulic motor in cc/rev.

P = Pressure in bar

Eh = Hydraulic motor efficiency

The following formula is used to calculate the output torque (To)

To = Ti x R x Eg Nm

Where Ti = Maximum torque at the input


6/81

R = Reduction ratio of the gear unit

Eg = Efficiency of the gear reducer (98% per

Stage)

For selecting an ideal gear unit the following relation should be

satisfied

Tr > or = To x Sf

Where Tr = Rated output torque of selected unit in Nm

Thermal capacity (Pt) = Absorbed power (Kw)/ Thermal SF from Table2

Pt must be < or = Thermal capacity of the gearbox

Overhung loads

Greaves GP series planetary gearboxes are fitted with Taper roller/ Ball

bearing/ Spherical roller bearings for accommodating normal overhungloads imposed by the application. Whenever sprocket, gear, sheave orpulley is mounted on the output shaft, a calculation must be made to

determine the overhung load in Newtons on the shaft, using following

formula.Pn = Kw x 9550000 x K Newtons

N x Rp

Where Pn = Equivalent overhung load in Newtons

Kw = Power carried by shaft in Kilo Watts

Rp = Pitch radius of Sprocket, pinion, sheave or

Pulley in mm

K = Factor

Over hung member K Factor

Sprocket, single strand 1.00

Spur Pinion 1.25

V- Belt sheave 1.5

Flat belt pulley 2.0

The calculated overhung load should be compared with the permissible

values given in Table 4. For GP series units with higher overhung loads

please call our application engineers.


7/81

Table 4 Allowable overhung loads on output shaft Newton

Single Stage

SizeAt

shaft

middle

AtShaft

Collar

SizeAt

shaft

middle

AtShaft

Collar

SizeAt shaftmiddle

At ShaftCollar

65L 1588 2052 220M 10845 15714 345L 29111 4289670L 1588 2052 220L 4069 5874 345M 26760 37087

100M 2176 2901 240L 10723 16519 390L 29222 43137

110M 2832 3888 240M 11361 16186 390M 29222 43137140L 3525 4963 240H 11211 16005 390H 19773 26715

140H 3982 5220 270L 16174 24386 420M 32565 45062140M 3525 4963 270M 16174 24386 420H 29539 38795

155L 3772 5319 285L 13839 20834 440L 31793 47106

155H 3982 5220 285H 14730 20617 440M 31793 47106175L 3986 5909 305L 24063 35172 480L 33021 48925175M 4172 5629 305M 18982 27521 480M 33021 48925

200L 4908 7286 330L 20558 30777 480H 28870 39986200H 4374 5909 330H 18713 25760

Two stage Three stage Quadruple stage

Size

At

shaft

middle

At

Shaft

Collar

Size

At

shaft

middle

At

Shaft

Collar

SizeAt shaft

middle

At Shaft

Collar95 5338 6917 95 8473 10980 95 11958 16154

110 6022 8063 110 8383 12202 110 26701 38865

140 7998 10675 125 23647 33059 125 37537 52478

160 16125 21311 140 25145 33631 140 51286 68592

180 14164 18388 160 32889 43465 160 42146 55439

200 31738 41633 180 35294 52878 180 56159 84238

225 26339 37971 200 42250 64238 180M 52075 78977

250 25727 37383 225 41810 60275 200 62402 90930

270 37162 47723 250 56500 76079 225 68110 91329

290 43077 57547 250M 48772 69492 225M 83947 119380

320 45384 59072 270 61160 82795 250 77420 110311340 50871 64987 290 68380 91350 270 92764 134699

360 47218 65253 320 72060 99083 320 122115 168541

400 50416 67603 360 74954 103583 340 104894 140360

440 64796 85884 400 66875 89395 360 95209 139288

440 102747 143279


8/81

U = Uniform load H = Heavy shock load M = Moderate shock load T = Refer to Greaves

Load ClassificaLoad ClassificaLoad ClassificaLoad ClassificaLoad Classificationtiontiontiontion

Table 2

Agitators

Pure liquids U

Liquids & solids MLiquids-variable density M

Blowers

Centrifugal U

Lobe M

Vane U

Brewing and distilling

Bottling Machinery U

B rew kett les cont . dul y U

Cookers cont. duty U

Mash tubs cont. duty U

S ca le h op pe r- fr e. s ta rt s M

Can filling M/C U

Cane knifes M

Car dumpers H

Car pulleys M

Clarifiers U

Classifiers M

Clay working machinery

Brick press H

Briquette machine H

Cla y wor ki ng mac hi ne ry M

Pug mill M

Compressors

Centrifugal U

Lobe M

Reciprocating - Multi-cyl. M

Single cyl. H

Conveyor-uniformly loaded

Apron UAssembly U

Belt U

Bucket U

Chain U

Flight U

Oven U

Screw U

Conveyor - heavy duty

Apron M

Assembly M

Belt M

Bucket M

Chain M

Flight M

Live roll H

Oven M

Reciprocating H

Screw M

Shaker H

Cranes

Main hoists U

Bridge travel H

Trolley travel H

Crusher

Ore H

Stone H

Sugar H

Dredges

Cable reels M

Conveyors M

Cutter head drives HJig drives H

Manoeuvring Winches M

Pumps M

Dry dock cranes

main hoist T

auxiliary hoist Tboom, luffing T

rotating swing or slew T

t rac kin g ,dr iv e w heel s T

Elevators

bucket-uniform load U

bucket-heavy load M

bucket-continuous U

centrifugal discharge U

escalators U

freight M

gravity discharge U

man lifts T

passenger T

Fans

centrifugal U

cooling towers

induced draft T

forced draft T

induced draft M

large, mine, etc. M

large, industrial M

light, small diameter U

Feeders

apron M

belt M

disc U

reciprocating H

screw M

Food industry

beef slicer Mcereal cooker U

dough mixer M

meat grinders M

Gen er at or s- no t wel di ng U

Hammer mills H

Hoists

heavy duty H

medium duty M

skip hoist M

Laundry machines

Laundry washers reverse M

Laundry tumblers M

Lineshafts

p roc essi ng equ ipm ent M

light applications U

other line shafts U

Lumber industry

barkers- Hydraulic M

barkers- mechanical M

burner conveyor M

c hain saw an d dra g saw H

chain transfer H

craneway transfer H

de-barking drum H

edger feeder M

gang feeder M

green chain M

live rolls H

log deck H

log haul-incline H

log haul-well type Hlog turning device H

main log conveyor H

off bearing rolls M

Merry-go-roundconveyor M

roll cases H

slab conveyor Hsmall waste conveyor-belt U

small waste conveyor-chain M

sorting table M

tipple hoist conveyor M

tipple hoist drive M

transfer conveyor M

transfer rolls M

tray drive M

trimmer feed M

waste conveyor M

Machine tools

bending roll M

punch press-gear driven H

notching press-belt driven T

plate planers H

tapping machine H

Other machine tools

Main drives M

Auxiliary drives U

Metal mills

Draw bench carriage M

Main drive M

pinch, dryer and scrubber

rolls-reversing T

slitters M

Table conveyors -

non-reversing

group drives M

individual drives H

Reversing -

wire drawing Mflattening machine M

wire winging machine M

Mill-rotary type ball H

cement kilns H

dryers and coolers H

kilns, other than - cement H

pebble H

rod plain H

wedge bar H

tumbling barrels H

Mixers

conc ret e m ix ers - co nt. M

concrete mixers -int. M

constant density U

variable density M

Oil industry

chillers M

oil well pumping T

paraffin filter press M

rotary kilns M

Paper mills

agitators, (Mixers) M

barker-auxiliaries hydraulic M

barker-mechanical H

barking drum H

beater and pulper M

bleacher U

calenders M

calenders-super H

Converting machine,

exce pt cut te rs, p lat ers Mconveyors U

couch M

cutters-plates H

felt whipper H

jordans M

log haul Hpresses M

pulp machine reel M

suction roll M

washers & thickeners M

winders M

Printing presses

Pullers T

barge haul H

Pumps centrifugal U

proportioning M

reciprocating single acting

3 or more cylinders M

reciprocating double acting

2 or more cylinders M

single acting 1or 2 cylinders T

double acting; single cylinder T

rotary - gear type U

rotary - lobe, vane U

Rubber and plastics industries

crackers H

l abora tory, equi pme nt M

mixed minds H

refiners M

rubber calenders M

rubber mill-2 on line M

rubber mill-3 on line M

sheeter M

t ir e b uil di ng m achi nes T

tire and tube press openers T

tubers and strainers M

warming mills M

Sand multer M

Sewage disposal equipment

bar screens U

chemical feeders U

collectors U

de watering screws M

scum breakers M

slow or rapid mixers M

thickeners M

vacuum filters M

Screens

air washingU

r ota ry-s tone or gr avel M

t rav ell ing w ater in tak e U

Slab pushers M

Steering gear Stokers U

Sugar industry

cane knives M

crushers M

mills M

Textile industry

batchers M

calenders M

cards M

dry cans M

dryers M

dyeing machinery M

k ni tt in g mac hi ne s l oo ms M

mangles M

nappers M

pads M

range drives slashers M

soapers Mspinners M

tenter frames M

washers M

Driven Machine Load Type Driven Machine Load TypeDriven Machine Load TypeDriven Machine Load Type


9/81

DOUBLE STAGE

G.B.SIZE Y Mc, Nm G.B.SIZE Y Mc, Nm G.B.SIZE Y Mc,Nm

65L 69 85 270L 138 2447 95 85 87

70L 69 77 270M 138 1581 110 89 337

100L 75 160 285L 139 2886 140 123 503

100M 75 138 285H 137 989 180 138 1150

110L 81 201 305L 152 3761 200 132 1311

110M 81 266 305M 160 3333 225 129 1361

140L 99 228 330L 185 4104 250 155 1677

140M 99 312 330H 187 2070 270 185 3761

140H 96 257 345L 180 5091 290 194 4276

155L 98 421 345M 183 3437 320 216 4735

155H 96 215 390L 179 3583 340 234 5533

175L 115 485 390M 179 5846 360 216 9479

175H 116 421 390H 190 1910 400 242 11179

200L 114 827 420M 222 5898 440 254 13961

200H 115 648 420H 225 3605 500 371 16882

220L 126 728 440L 218 6478 560 362 33406

220M 123 692 440M 218 9479 630 435 44655

240L 130 1928 480L 218 6754 720 543 56168

240M 130 1618 480M 218 10666 800 549 102063

240H 128 668 480H 224 3040 890 613 126059

G.B.SIZE Y Mc,Nm G.B.SIZE Y Mc,Nm G.B.SIZE Y Mc,Nm

95 85 148 500 387 37619 180M 146 1910

110 90 621 560 429 49547 200 135 2087

125 103 710 630 477 62202 225 154 2353

140 122 692 720 574 151751 225M 154 3040

160 128 892 850 671 93035 250 153 3637

180 141 2197 980 813 473061 270 183 8750

200 135 2591 320 217 11179

225 159 3333 340 244 13961

250 152 3761 G.B.SIZE Y Mc,Nm 360 248 16882

250M 155 4438 95 86 146 440 388 24707

270 184 5091 110 90 358 500 419 35128

290 194 5898 125 103 779 560 436 47531

320 216 7539 140 122 989 630 492 105342

360 216 9307 160 130 1311 750 601 113599

400 245 10888 180 141 1581 850 694 97551

440 254 14839 980 825 343636

For safe operation of gear box, Applied Bending Moment on outputshaft is limited to values given in above

Applied bending moment in Nm = F*[Y+x]/1000

Where F= Transverse load applied on output shaft in N

ALLOWABLE BENDING MOMENT (Mc. Nm)ON OUTPUT SHAFT

QUADRUPLE STAGE

QUADRUPLE STAGE

TRIPLE STAGE

SINGLE STAGE SINGLE STAGE

TRIPLE STAGE


10/81

3.75 4.25 4.5 4.71 5.05

1500 2.38 2.10 1.98 1.90 1.771000 1.59 1.40 1.32 1.26 1.18

750 1.19 1.05 0.99 0.95 0.88

1500 2.83 2.50 2.36 2.25 2.10

1000 1.89 1.66 1.57 1.50 1.40

750 1.41 1.25 1.18 1.13 1.05

1500 5.46 4.82 4.55 4.35 4.05

1000 3.64 3.21 3.03 2.90 2.70

750 2.73 2.41 2.27 2.17 2.03

1500 10.91 9.63 9.10 8.69 8.11

1000 7.28 6.42 6.06 5.79 5.40

750 5.46 4.82 4.55 4.35 4.05

1500 18.36 16.20 15.30 14.62 13.631000 12.24 10.80 10.20 9.74 9.09

750 9.18 8.10 7.65 7.31 6.82

1500 39.69 35.02 33.08 31.60 29.47

1000 26.46 23.35 22.05 21.07 19.65

750 19.85 17.51 16.54 15.80 14.74

1500 42.17 37.21 35.14 33.58 31.31

1000 28.11 24.81 23.43 22.38 20.88

750 21.09 18.60 17.57 16.79 15.66

1500 59.54 52.53 49.61 47.40 44.21

1000 39.69 35.02 33.08 31.60 29.47

750 29.77 26.27 24.81 23.70 22.10

1500 79.38 70.04 66.15 63.20 58.951000 52.92 46.69 44.10 42.13 39.30

750 39.69 35.02 33.08 31.60 29.47

1500 109.15 96.31 90.96 86.90 81.05

1000 72.77 64.20 60.64 57.93 54.03

750 54.57 48.15 45.48 43.45 40.53

1500 138.92 122.57 115.76 110.60 103.15

1000 92.61 81.71 77.18 73.73 68.77

750 69.46 61.29 57.88 55.30 51.58

1500 178.61 157.59 148.84 142.20 132.63

1000 119.07 105.06 99.23 94.80 88.42

750 89.30 78.80 74.42 71.10 66.31

1500 213.33 188.24 177.78 169.85 158.42

1000 142.22 125.49 118.52 113.23 105.61

750 106.67 94.12 88.89 84.93 79.21

1500 272.87 240.77 227.39 217.25 202.63

1000 181.91 160.51 151.59 144.83 135.08

750 136.43 120.38 113.70 108.63 101.31

1500 322.48 284.54 268.73 256.75 239.47

1000 214.99 189.70 179.16 171.17 159.64

750 161.24 142.27 134.37 128.38 119.73

1500 436.59 385.23 363.83 347.60 324.20

1000 291.06 256.82 242.55 231.74 216.13

750 218.30 192.61 181.91 173.80 162.10

1500 570.54 503.42 475.45 454.26 423.67

1000 380.36 335.61 316.97 302.84 282.45

750 285 27 251 71 237 73 227 13 211 84

7475

10120

13225

390L

440L

1380

1840

2530

3220

4140

4945

6325

P.in. kW. Mechanical

220L

240L

140L

155L

175L 978

920

55

127

330L

200L

345L

270L

285L

305L

100L

110L 253

426

8.81

13.33

Ratios 3.75 - 5.05

P. kW

Thermaln1 rpmSize T2 Nm

66

65L

70L

35.27

38.07

15.33

17.67

19.6

21.4

REDUCTION RATIO

GREAVES PLANETARY SINGLE REDUCTION RATINGS

>P.kW.Mech

53

58

69.9

104.83

25.37

32.37


11/81

5.67 6.25 6.68 7.2 7.58

1500 4.27 3.87 3.62 3.36 3.19

1000 2.84 2.58 2.41 2.24 2.13

750 2.13 1.93 1.81 1.68 1.60

1500 5.25 4.76 4.46 4.13 3.93

1000 3.50 3.18 2.97 2.76 2.62

750 2.63 2.38 2.23 2.07 1.96

1500 10.50 9.53 8.91 8.27 7.85

1000 7.00 6.35 5.94 5.51 5.24

750 5.25 4.76 4.46 4.13 3.93

1500 19.69 17.86 16.71 15.50 14.73

1000 13.13 11.91 11.14 10.34 9.82

750 9.84 8.93 8.36 7.75 7.36

1500 32.81 29.77 27.85 25.84 24.54

1000 21.88 19.85 18.57 17.23 16.36

750 16.41 14.88 13.93 12.92 12.27

1500 52.50 47.63 44.56 41.34 39.27

1000 35.00 31.75 29.71 27.56 26.18

750 26.25 23.81 22.28 20.67 19.64

1500 78.75 71.44 66.84 62.02 58.91

1000 52.50 47.63 44.56 41.34 39.27

750 39.38 35.72 33.42 31.01 29.45

1500 108.28 98.23 91.91 85.27 81.00

1000 72.19 65.49 61.27 56.85 54.00

750 54.14 49.12 45.95 42.64 40.50

1500 147.66 133.95 125.33 116.28 110.45

1000 98.44 89.30 83.55 77.52 73.63

750 73.83 66.98 62.67 58.14 55.23

1500 196.88 178.61 167.11 155.04 147.27

1000 131.25 119.07 111.41 103.36 98.18

750 98.44 89.30 83.55 77.52 73.63

1500 255.94 232.19 217.24 201.55 191.45

1000 170.63 154.79 144.83 134.37 127.63

750 127.97 116.09 108.62 100.78 95.72

1500 321.56 291.72 272.94 253.23 240.54

1000 214.38 194.48 181.96 168.82 160.36

750 160.78 145.86 136.47 126.62 120.27

1500 406.88 369.12 345.36 320.41 304.351000 271.25 246.08 230.24 213.61 202.90

750 203.44 184.56 172.68 160.21 152.18

1500 492.19 446.51 417.77 387.60 368.17

1000 328.13 297.68 278.51 258.40 245.44

750 246.09 223.26 208.89 193.80 184.08

1500 590.63 535.82 501.32 465.12 441.80

1000 393.75 357.21 334.22 310.08 294.53

750 295.31 267.91 250.66 232.56 220.90

1500 820.31 744.19 696.28 646.00 613.61

1000 546.88 496.13 464.19 430.66 409.07

750 410.16 372.09 348.14 323.00 306.81

1500 1115.63 1012.10 946.95 878.56 834.51

1000 743.75 674.73 631.30 585.70 556.34

750 557.81 506.05 473.47 439.28 417.26

1500 1443 75 1309 77 1225 46 1136 95 1079 96

58

110M

Sp

ecialson

enquiry

>P.kW.Mech

69.9

78.87

104.83

114

25.37

32.37

38.06

1150

17.67

19.6

2760

1840

690

Ratios 5.67 - 7.58

P. kW



REDUCTION RATIO

175M

440M

17250

345M

420M

520M

480M

184

150

390M

220M

240M

270M

100M

368

305M

140M

610M

670M 39100

560M


20700

28750

3795

5175

6900

8970

11270

14260


12/81

8.04 8.74 9.43 10.26

1500 3.93 3.62 3.35 3.08

1000 2.62 2.41 2.24 2.06

750 1.97 1.81 1.68 1.54

1500 4.86 4.47 4.14 3.81

1000 3.24 2.98 2.76 2.54

750 2.43 2.24 2.07 1.90

1500 9.72 8.94 8.29 7.62

1000 6.48 5.96 5.52 5.08

750 4.86 4.47 4.14 3.81

1500 17.36 15.97 14.80 13.60

1000 11.57 10.64 9.86 9.07

750 8.68 7.98 7.40 6.80

1500 31.24 28.74 26.63 24.48

1000 20.83 19.16 17.76 16.32

750 15.62 14.37 13.32 12.24

1500 48.59 44.70 41.43 38.08

1000 32.40 29.80 27.62 25.39

750 24.30 22.35 20.72 19.04

1500 71.73 65.99 61.16 56.21

1000 47.82 43.99 40.77 37.48

750 35.87 32.99 30.58 28.11

1500 101.82 93.66 86.81 79.79

1000 67.88 62.44 57.87 53.19

750 50.91 46.83 43.40 39.89

1500 138.84 127.72 118.38 108.801000 92.56 85.15 78.92 72.53

750 69.42 63.86 59.19 54.40

1500 185.12 170.29 157.83 145.07

1000 123.41 113.53 105.22 96.71

750 92.56 85.15 78.92 72.53

1500 242.97 223.51 207.16 190.40

1000 161.98 149.01 138.10 126.93

750 121.49 111.76 103.58 95.20

1500 289.25 266.09 246.62 226.67

1000 192.83 177.39 164.41 151.11

750 144.63 133.04 123.31 113.33

1500 370.24 340.59 315.67 290.13

1000 246.83 227.06 210.45 193.42

750 185.12 170.29 157.83 145.07

1500 451.23 415.09 384.72 353.60

1000 300.82 276.73 256.48 235.73

750 225.62 207.55 192.36 176.80

1500 543.79 500.24 463.64 426.13

1000 362.53 333.49 309.09 284.09

750 271.90 250.12 231.82 213.07

1500 763.63 702.47 651.07 598.40

1000 509.08 468.31 434.04 398.93

750 381.81 351.23 325.53 299.20

1500 1052.88 968.55 897.68 825.06

1000 701.92 645.70 598.45 550.04

750 526.44 484.28 448.84 412.53

1500 1365 27 1255 92 1164 03 1069 86


52325

12075

14375

480H

22425

520H


870H

940H

18400

9200

27025

37950

560H

610H

863

6900

3565

700H

670H

200H

240H

285H

330H

390H

420H

750H

114.83

32.37

Ratios 8.04 - 10.26

P. kW


242

140H

5060

Sp

ecialson

enquiry

132.05

141

152

170

78.87

155H

REDUCTION RATIO

>P.kW.Mech

53

69.9

2415

196

483

1553


13/81

Ratios 14 - 38

14 20 25 27 30 33 35 38

1500 2.26 1.58 1.26 1.17 1.05 0.96 0.90 0.831000 1.50 1.05 0.84 0.78 0.70 0.64 0.60 0.55750 1.13 0.79 0.63 0.58 0.53 0.48 0.45 0.421500 4.23 2.96 2.37 2.19 1.97 1.79 1.69 1.56

1000 2.82 1.97 1.58 1.46 1.32 1.20 1.13 1.04750 2.11 1.48 1.18 1.10 0.99 0.90 0.85 0.781500 7.75 5.43 4.34 4.02 3.62 3.29 3.10 2.861000 5.17 3.62 2.89 2.68 2.41 2.19 2.07 1.90750 3.88 2.71 2.17 2.01 1.81 1.64 1.55 1.431500 11.98 8.39 6.71 6.21 5.59 5.08 4.79 4.421000 7.99 5.59 4.47 4.14 3.73 3.39 3.20 2.94750 5.99 4.19 3.36 3.11 2.80 2.54 2.40 2.211500 17.62 12.34 9.87 9.14 8.22 7.48 7.05 6.491000 11.75 8.22 6.58 6.09 5.48 4.98 4.70 4.33750 8.55 5.99 4.79 4.44 3.99 3.63 3.42 3.151500 25.38 17.76 14.21 13.16 11.84 10.77 10.15 9.351000 16.92 11.84 9.47 8.77 7.90 7.18 6.77 6.23750 12.69 8.88 7.11 6.58 5.92 5.38 5.08 4.671500 35.25 24.67 19.74 18.28 16.45 14.95 14.10 12.991000 23.50 16.45 13.16 12.18 10.97 9.97 9.40 8.66

750 17.62 12.34 9.87 9.14 8.22 7.48 7.05 6.491500 45.11 31.58 25.26 23.39 21.05 19.14 18.05 16.621000 30.08 21.05 16.84 15.60 14.04 12.76 12.03 11.08750 22.56 15.79 12.63 11.70 10.53 9.57 9.02 8.311500 60.62 42.44 33.95 31.43 28.29 25.72 24.25 22.331000 40.42 28.29 22.63 20.96 18.86 17.15 16.17 14.89750 30.31 21.22 16.97 15.72 14.15 12.86 12.12 11.171500 76.13 53.29 42.63 39.48 35.53 32.30 30.45 28.051000 50.75 35.53 28.42 26.32 23.69 21.53 20.30 18.70750 38.07 26.65 21.32 19.74 17.76 16.15 15.23 14.021500 94.46 66.12 52.90 48.98 44.08 40.07 37.78 34.801000 62.97 44.08 35.26 32.65 29.39 26.72 25.19 23.20750 47.23 33.06 26.45 24.49 22.04 20.04 18.89 17.401500 112.79 78.95 63.16 58.48 52.63 47.85 45.11 41.551000 75.19 52.63 42.11 38.99 35.09 31.90 30.08 27.70750 56.39 39.48 31.58 29.24 26.32 23.92 22.56 20.78

1500 138.16 96.71 77.37 71.64 64.48 58.62 55.27 50.901000 92.11 64.48 51.58 47.76 42.98 39.08 36.84 33.94750 69.08 48.36 38.69 35.82 32.24 29.31 27.63 25.451500 197.38 138.16 110.53 102.34 92.11 83.74 78.95 72.721000 131.58 92.11 73.69 68.23 61.41 55.82 52.63 48.48750 98.69 69.08 55.27 51.17 46.05 41.87 39.48 36.361500 260.82 182.57 146.06 135.24 121.72 110.65 104.33 96.091000 173.88 121.72 97.37 90.16 81.14 73.77 69.55 64.06750 130.41 91.29 73.03 67.62 60.86 55.33 52.16 48.051500 338.36 236.85 189.48 175.45 157.90 143.55 135.34 124.661000 225.57 157.90 126.32 116.96 105.27 95.70 90.23 83.11750 169.18 118.43 94.74 87.72 78.95 71.77 67.67 62.331500 451.15 315.80 252.64 233.93 210.54 191.40 180.46 166.211000 300.77 210.54 168.43 155.95 140.36 127.60 120.31 110.81750 225.57 157.90 126.32 116.96 105.27 95.70 90.23 83.111500 697.87 488.51 390.81 361.86 325.67 296.07 279.15 257.111000 465.25 325.67 260.54 241.24 217.12 197.38 186.10 171.41750 348.94 244.25 195.40 180.93 162.84 148.03 139.57 128.561500 1029.18 720.43 576.34 533.65 480.28 436.62 411.67 379.171000 686.12 480.28 384.23 355.77 320.19 291.08 274.45 252.78750 514.59 360.21 288.17 266.82 240.14 218.31 205.84 189.591500 1452.13 1016.49 813.19 752.96 677.66 616.06 580.85 535.001000 968.09 677.66 542.13 501.97 451.77 410.70 387.24 356.66750 726.07 508.25 406.60 376.48 338.83 308.03 290.43 267.501500 1959.68 1371.77 1097.42 1016.13 914.52 831.38 783.87 721.991000 1306.45 914.52 731.61 677.42 609.68 554.25 522.58 481.32750 979.84 685.89 548.71 508.06 457.26 415.69 391.94 360.99

Specials on request

GREAVES PLANETARY DOUBLE REDUCTION RATINGS

Size T2 Nm n1 rpm

REDUCTION RATIOP.Kw

ThermalP.in kW.Mechanical

95 184

>P2.

Mech

anical

110 345

140 633

160 978

180 1438 12.8

200 2070 14.76

225 2875 18.37

250 3680 20.73

270 4945 25.09

290 6210 27.79

320 7705 33.9

340 9200 37.36

360 11270 47.15

400 16100 53.82

440 21275 55.19

500 27600

Checkforthermalrating

capacitiesand

forcedcoolingrequ

irements'

560 36800

630 56925

720 83950

800 118450

890 159850


14/81

Ratios 41 - 64

41 45 47 50 55 58 60 64

1500 0.77 0.70 0.67 0.63 0.57 0.54 0.53 0.49

1000 0.51 0.47 0.45 0.42 0.38 0.36 0.35 0.33750 0.39 0.35 0.34 0.32 0.29 0.27 0.26 0.25

1500 1.44 1.32 1.26 1.18 1.08 1.02 0.99 0.93

1000 0.96 0.88 0.84 0.79 0.72 0.68 0.66 0.62

750 0.72 0.66 0.63 0.59 0.54 0.51 0.49 0.46

1500 2.65 2.41 2.31 2.17 1.97 1.87 1.81 1.70

1000 1.77 1.61 1.54 1.45 1.32 1.25 1.21 1.13

750 1.32 1.21 1.15 1.09 0.99 0.94 0.90 0.85

1500 4.09 3.73 3.57 3.36 3.05 2.89 2.80 2.62

1000 2.73 2.49 2.38 2.24 2.03 1.93 1.86 1.75

750 2.05 1.86 1.78 1.68 1.53 1.45 1.40 1.31

1500 6.02 5.48 5.25 4.93 4.49 4.25 4.11 3.86

1000 4.01 3.66 3.50 3.29 2.99 2.84 2.74 2.57

750 2.92 2.66 2.55 2.40 2.18 2.06 2.00 1.87

1500 8.67 7.90 7.56 7.11 6.46 6.13 5.92 5.551000 5.78 5.26 5.04 4.74 4.31 4.08 3.95 3.70

750 4.33 3.95 3.78 3.55 3.23 3.06 2.96 2.78

1500 12.04 10.97 10.50 9.87 8.97 8.51 8.22 7.71

1000 8.02 7.31 7.00 6.58 5.98 5.67 5.48 5.14

750 6.02 5.48 5.25 4.93 4.49 4.25 4.11 3.86

1500 15.41 14.04 13.44 12.63 11.48 10.89 10.53 9.87

1000 10.27 9.36 8.96 8.42 7.66 7.26 7.02 6.58

750 7.70 7.02 6.72 6.32 5.74 5.44 5.26 4.93

1500 20.70 18.86 18.06 16.97 15.43 14.63 14.15 13.26

1000 13.80 12.57 12.04 11.32 10.29 9.76 9.43 8.84

750 10.35 9.43 9.03 8.49 7.72 7.32 7.07 6.63

1500 26.00 23.69 22.68 21.32 19.38 18.38 17.76 16.65

1000 17.33 15.79 15.12 14.21 12.92 12.25 11.84 11.10

750 13.00 11.84 11.34 10.66 9.69 9.19 8.88 8.33

1500 32.25 29.39 28.14 26.45 24.04 22.80 22.04 20.66

1000 21.50 19.59 18.76 17.63 16.03 15.20 14.69 13.78

750 16.13 14.69 14.07 13.22 12.02 11.40 11.02 10.33

1500 38.51 35.09 33.60 31.58 28.71 27.22 26.32 24.67

1000 25.68 23.39 22.40 21.05 19.14 18.15 17.54 16.45

750 19.26 17.54 16.80 15.79 14.35 13.61 13.16 12.34

1500 47.18 42.98 41.16 38.69 35.17 33.35 32.24 30.22

1000 31.45 28.66 27.44 25.79 23.45 22.23 21.49 20.15

750 23.59 21.49 20.58 19.34 17.58 16.67 16.12 15.11

1500 67.40 61.41 58.79 55.27 50.24 47.64 46.05 43.18

1000 44.93 40.94 39.20 36.84 33.49 31.76 30.70 28.78

750 33.70 30.70 29.40 27.63 25.12 23.82 23.03 21.59

1500 89.06 81.14 77.69 73.03 66.39 62.96 60.86 57.05

1000 59.37 54.10 51.79 48.69 44.26 41.97 40.57 38.04

750 44.53 40.57 38.85 36.51 33.20 31.48 30.43 28.53

1500 115.54 105.27 100.79 94.74 86.13 81.67 78.95 74.02

1000 77.03 70.18 67.19 63.16 57.42 54.45 52.63 49.34

750 57.77 52.63 50.39 47.37 43.06 40.84 39.48 37.01

1500 154.05 140.36 134.38 126.32 114.84 108.90 105.27 98.69

1000 102.70 93.57 89.59 84.21 76.56 72.60 70.18 65.79

750 77.03 70.18 67.19 63.16 57.42 54.45 52.63 49.34

1500 238.30 217.12 207.88 195.40 177.64 168.45 162.84 152.66

1000 158.86 144.74 138.58 130.27 118.43 112.30 108.56 101.77

750 119.15 108.56 103.94 97.70 88.82 84.23 81.42 76.33

1500 351.43 320.19 306.56 288.17 261.97 248.42 240.14 225.13

1000 234.29 213.46 204.38 192.11 174.65 165.62 160.09 150.09

750 175.71 160.09 153.28 144.09 130.99 124.21 120.07 112.571500 495.85 451.77 432.55 406.60 369.63 350.52 338.83 317.65

1000 330.57 301.18 288.37 271.06 246.42 233.68 225.89 211.77

750 247 93 225 89 216 28 203 30 184 82 175 26 169 42 158 83

95

160

110

140

GREAVES PLANETARY DOUBLE REDUCTION RATINGS

P.in kW.Mechanical

n1 rpmSize T2 Nm

REDUCTION RATIO

250 3680

270 4945

14.76

18.37

200 2070

225 2875

20.73

25.09

27.79

33.9

37.36

47.15

53.82

55.19

ortherm

alratingcapacitiesandforced

coo

lingrequirements'

P.Kw

Thermal

>P2.

Mechanical

345

633

978

184

290 6210

320 7705

16100

440 21275

340 9200

360 11270

720 83950

800 118450

1438 12.8180

630 56925

500 27600

560 36800

400


15/81

75 80 86 95 101 118 125 139 149 158 167 178 185

1500 0.66 0.62 0.57 0.52 0.49 0.42 0.39 0.35 0.33 0.31 0.30 0.28 0.27

1000 0.44 0.41 0.38 0.35 0.33 0.28 0.26 0.24 0.22 0.21 0.20 0.18 0.18

750 0.33 0.31 0.29 0.26 0.24 0.21 0.20 0.18 0.17 0.16 0.15 0.14 0.13

1500 1.18 1.11 1.03 0.93 0.88 0.75 0.71 0.64 0.60 0.56 0.53 0.50 0.48

1000 0.79 0.74 0.69 0.62 0.59 0.50 0.47 0.43 0.40 0.37 0.35 0.33 0.32

750 0.59 0.56 0.52 0.47 0.44 0.38 0.36 0.32 0.30 0.28 0.27 0.25 0.24

1500 1.89 1.78 1.65 1.50 1.41 1.20 1.14 1.02 0.95 0.90 0.85 0.80 0.77

1000 1.26 1.18 1.10 1.00 0.94 0.80 0.76 0.68 0.64 0.60 0.57 0.53 0.51

750 0.95 0.89 0.83 0.75 0.70 0.60 0.57 0.51 0.48 0.45 0.43 0.40 0.38

1500 2.63 2.47 2.30 2.08 1.95 1.67 1.58 1.42 1.32 1.25 1.18 1.11 1.07

1000 1.75 1.64 1.53 1.39 1.30 1.12 1.05 0.95 0.88 0.83 0.79 0.74 0.71

750 1.32 1.23 1.15 1.04 0.98 0.84 0.79 0.71 0.66 0.62 0.59 0.55 0.53

1500 3.68 3.45 3.21 2.91 2.74 2.34 2.21 1.99 1.85 1.75 1.65 1.55 1.49

1000 2.46 2.30 2.14 1.94 1.82 1.56 1.47 1.33 1.24 1.17 1.10 1.03 1.00

750 1.84 1.73 1.61 1.45 1.37 1.17 1.11 0.99 0.93 0.87 0.83 0.78 0.75

1500 5.26 4.93 4.59 4.16 3.91 3.35 3.16 2.84 2.65 2.50 2.36 2.22 2.13

1000 3.51 3.29 3.06 2.77 2.61 2.23 2.11 1.89 1.77 1.67 1.58 1.48 1.42

750 2.63 2.47 2.30 2.08 1.95 1.67 1.58 1.42 1.32 1.25 1.18 1.11 1.07

1500 7.11 6.66 6.20 5.61 5.28 4.52 4.26 3.83 3.58 3.37 3.19 2.99 2.88

1000 4.74 4.44 4.13 3.74 3.52 3.01 2.84 2.56 2.38 2.25 2.13 2.00 1.92

750 3.55 3.33 3.10 2.80 2.64 2.26 2.13 1.92 1.79 1.69 1.60 1.50 1.44

1500 8.68 8.14 7.57 6.86 6.45 5.52 5.21 4.69 4.37 4.12 3.90 3.66 3.52

1000 5.79 5.43 5.05 4.57 4.30 3.68 3.47 3.12 2.91 2.75 2.60 2.44 2.35

750 4.34 4.07 3.79 3.43 3.22 2.76 2.61 2.34 2.19 2.06 1.95 1.83 1.76

1500 11.32 10.61 9.87 8.93 8.40 7.19 6.79 6.11 5.70 5.37 5.08 4.77 4.59

1000 7.54 7.07 6.58 5.96 5.60 4.80 4.53 4.07 3.80 3.58 3.39 3.18 3.06

750 5.66 5.30 4.93 4.47 4.20 3.60 3.39 3.05 2.85 2.69 2.54 2.38 2.29

1500 13.95 13.08 12.16 11.01 10.36 8.87 8.37 7.53 7.02 6.62 6.26 5.88 5.65

1000 9.30 8.72 8.11 7.34 6.90 5.91 5.58 5.02 4.68 4.41 4.18 3.92 3.77

750 6.97 6.54 6.08 5.51 5.18 4.43 4.18 3.76 3.51 3.31 3.13 2.94 2.83

1500 17.11 16.04 14.92 13.50 12.70 10.87 10.26 9.23 8.61 8.12 7.68 7.21 6.93

1000 11.40 10.69 9.95 9.00 8.47 7.25 6.84 6.15 5.74 5.41 5.12 4.81 4.62

750 8.55 8.02 7.46 6.75 6.35 5.44 5.13 4.61 4.31 4.06 3.84 3.60 3.47

1500 20.53 19.24 17.90 16.21 15.24 13.05 12.32 11.08 10.33 9.74 9.22 8.65 8.32

1000 13.68 12.83 11.93 10.80 10.16 8.70 8.21 7.38 6.89 6.50 6.15 5.77 5.55

750 10.26 9.62 8.95 8.10 7.62 6.52 6.16 5.54 5.17 4.87 4.61 4.32 4.16

1500 28.95 27.14 25.25 22.85 21.50 18.40 17.37 15.62 14.57 13.74 13.00 12.20 11.74

1000 19.30 18.09 16.83 15.24 14.33 12.27 11.58 10.41 9.71 9.16 8.67 8.13 7.82

750 14.47 13.57 12.62 11.43 10.75 9.20 8.68 7.81 7.29 6.87 6.50 6.10 5.871500 39.48 37.01 34.43 31.16 29.31 25.09 23.69 21.30 19.87 18.74 17.73 16.63 16.00

1000 26.32 24.67 22.95 20.78 19.54 16.73 15.79 14.20 13.25 12.49 11.82 11.09 10.67

750 19.74 18.50 17.21 15.58 14.66 12.55 11.84 10.65 9.94 9.37 8.86 8.32 8.00

1500 52.63 49.34 45.90 41.55 39.08 33.45 31.58 28.40 26.49 24.98 23.64 22.18 21.34

1000 35.09 32.90 30.60 27.70 26.06 22.30 21.05 18.93 17.66 16.66 15.76 14.78 14.23

750 26.32 24.67 22.95 20.78 19.54 16.73 15.79 14.20 13.25 12.49 11.82 11.09 10.67

1500 65.79 61.68 57.38 51.94 48.86 41.82 39.48 35.50 33.12 31.23 29.55 27.72 26.67

1000 43.86 41.12 38.25 34.63 32.57 27.88 26.32 23.67 22.08 20.82 19.70 18.48 17.78

750 32.90 30.84 28.69 25.97 24.43 20.91 19.74 17.75 16.56 15.62 14.77 13.86 13.34

1500 107.90 101.16 94.10 85.18 80.12 68.58 64.74 58.22 54.31 51.22 48.46 45.46 43.74

1000 71.93 67.44 62.73 56.79 53.42 45.72 43.16 38.81 36.21 34.15 32.31 30.31 29.16

750 53.95 50.58 47.05 42.59 40.06 34.29 32.37 29.11 27.16 25.61 24.23 22.73 21.87

15 00 16 0. 53 15 0. 50 14 0. 00 12 6. 74 11 9. 21 1 02 .0 3 96 .3 2 86 .6 2 80 .81 76 .20 7 2. 10 6 7. 64 6 5. 08

1000 107.02 100.33 93.33 84.49 79.47 68.02 64.21 57.75 53.87 50.80 48.06 45.09 43.39

750 80.27 75.25 70.00 63.37 59.60 51.02 48.16 43.31 40.40 38.10 36.05 33.82 32.54

1500 228.96 214.65 199.67 180.76 170.02 145.52 137.37 123.54 115.25 108.68 102.83 96.47 92.82

1000 152.64 143.10 133.11 120.50 113.35 97.02 91.58 82.36 76.83 72.45 68.55 64.31 61.88

750 114.48 1 07.32 99.84 90.38 85.01 72.76 68.69 61.77 57.62 54.34 51.41 48.24 46.41

1500 310.54 291.13 270.82 245.16 230.60 197.38 186.32 167.56 156.31 147.41 139.46 130.85 125.89

10 00 20 7. 03 19 4. 09 18 0. 55 16 3. 44 15 3. 73 1 31 .5 8 1 24 .2 2 1 11 .7 1 1 04 .21 98 .27 9 2. 98 8 7. 23 8 3. 93

750 155.27 145.57 135.41 122.58 115.30 98.69 93.16 83.78 78.16 73.70 69.73 65.42 62.95

1500 481.60 451.50 420.00 380.21 357.62 306.10 288.96 259.86 242.42 228.61 216.29 202.92 195.24

1000 321.07 301.00 280.00 253.47 238.42 204.07 192.64 173.24 161.61 152.41 144.19 135.28 130.16

750 240.80 225.75 210.00 190.11 178.81 153.05 144.48 129.93 121.21 114.30 108.14 101.46 97.62

1500 763.19 715.49 665.57 602.52 566.73 485.08 457.92 411.79 384.16 362.27 342.75 321.57 309.40

1000 508.80 477.00 443.72 401.68 377.82 323.39 305.28 274.53 256.10 241.52 228.50 214.38 206.27

750 381.60 357.75 332.79 301.26 283.36 242.54 228.96 205.90 192.08 181.14 171.38 160.78 154.70

Checkforforcedcoolingre

quirements'

Size T2 Nm

95

110

160

518

828

8970

250M

225

290

Ratios 75 - 185

7475

1150

125

140

200

3795

4945

270

250

17250360

3105

333500

28750

47150

70150

100050

135700

210450

23000

6095

GREAVES PLANETARY TRIPLE REDUCTION RATINGS

12650

n1 rpm

P in kW MECHANICAL

1610

288

320

2300180

REDUCTION RATIO

400

850

980

440

500

560

630

720


16/81

196 210 225 237 252 274 295 302 322 352 374 394

1500 0.25 0.23 0.22 0.21 0.20 0.18 0.17 0.16 0.15 0.14 0.13 0.13

1000 0.17 0.16 0.15 0.14 0.13 0.12 0.11 0.11 0.10 0.09 0.09 0.08

750 0.13 0.12 0.11 0.10 0.10 0.09 0.08 0.08 0.08 0.07 0.07 0.06

1500 0.45 0.42 0.39 0.37 0.35 0.32 0.30 0.29 0.28 0.25 0.24 0.23

1000 0.30 0.28 0.26 0.25 0.23 0.22 0.20 0.20 0.18 0.17 0.16 0.15

750 0.23 0.21 0.20 0.19 0.18 0.16 0.15 0.15 0.14 0.13 0.12 0.11

1500 0.73 0.68 0.63 0.60 0.56 0.52 0.48 0.47 0.44 0.40 0.38 0.36

1000 0.48 0.45 0.42 0.40 0.38 0.35 0.32 0.31 0.29 0.27 0.25 0.24

750 0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.24 0.22 0.20 0.19 0.18

1500 1.01 0.94 0.88 0.83 0.78 0.72 0.67 0.65 0.61 0.56 0.53 0.50

1000 0.67 0.63 0.58 0.56 0.52 0.48 0.45 0.44 0.41 0.37 0.35 0.33

750 0.50 0.47 0.44 0.42 0.39 0.36 0.33 0.33 0.31 0.28 0.26 0.25

1500 1.41 1.32 1.23 1.17 1.10 1.01 0.94 0.91 0.86 0.79 0.74 0.70

1000 0.94 0.88 0.82 0.78 0.73 0.67 0.62 0.61 0.57 0.52 0.49 0.47

750 0.70 0.66 0.61 0.58 0.55 0.50 0.47 0.46 0.43 0.39 0.37 0.35

1500 2.01 1.88 1.75 1.67 1.57 1.44 1.34 1.31 1.23 1.12 1.06 1.00

1000 1.34 1.25 1.17 1.11 1.04 0.96 0.89 0.87 0.82 0.75 0.70 0.67

750 1.01 0.94 0.88 0.83 0.78 0.72 0.67 0.65 0.61 0.56 0.53 0.50

1500 2.72 2.54 2.37 2.25 2.11 1.94 1.81 1.76 1.66 1.51 1.42 1.35

1000 1.81 1.69 1.58 1.50 1.41 1.30 1.20 1.18 1.10 1.01 0.95 0.90

750 1.36 1.27 1.18 1.12 1.06 0.97 0.90 0.88 0.83 0.76 0.71 0.68

1500 3.32 3.10 2.89 2.75 2.58 2.38 2.21 2.16 2.02 1.85 1.74 1.65

1000 2.22 2.07 1.93 1.83 1.72 1.58 1.47 1.44 1.35 1.23 1.16 1.10

750 1.66 1.55 1.45 1.37 1.29 1.19 1.10 1.08 1.01 0.93 0.87 0.83

1500 4.33 4.04 3.77 3.58 3.37 3.10 2.88 2.81 2.64 2.41 2.27 2.15

1000 2.89 2.69 2.51 2.39 2.25 2.07 1.92 1.87 1.76 1.61 1.51 1.44

750 2.17 2.02 1.89 1.79 1.68 1.55 1.44 1.41 1.32 1.21 1.13 1.08

1500 5.34 4.98 4.65 4.41 4.15 3.82 3.55 3.46 3.25 2.97 2.80 2.66

1000 3.56 3.32 3.10 2.94 2.77 2.55 2.36 2.31 2.17 1.98 1.86 1.77

750 2.67 2.49 2.32 2.21 2.08 1.91 1.77 1.73 1.62 1.49 1.40 1.33

1500 6.55 6.11 5.70 5.41 5.09 4.68 4.35 4.25 3.98 3.64 3.43 3.26

1000 4.36 4.07 3.80 3.61 3.39 3.12 2.90 2.83 2.66 2.43 2.29 2.17

750 3.27 3.05 2.85 2.71 2.55 2.34 2.17 2.12 1.99 1.82 1.72 1.63

1500 7.85 7.33 6.84 6.50 6.11 5.62 5.22 5.10 4.78 4.37 4.12 3.91

1000 5.24 4.89 4.56 4.33 4.07 3.75 3.48 3.40 3.19 2.92 2.74 2.60

750 3.93 3.67 3.42 3.25 3.05 2.81 2.61 2.55 2.39 2.19 2.06 1.95

1500 11.08 10.34 9.65 9.16 8.62 7.92 7.36 7.19 6.74 6.17 5.81 5.51

1000 7.38 6.89 6.43 6.11 5.74 5.28 4.91 4.79 4.50 4.11 3.87 3.67

750 5.54 5.17 4.82 4.58 4.31 3.96 3.68 3.59 3.37 3.08 2.90 2.76

1500 15.11 14.10 13.16 12.49 11.75 10.81 10.04 9.80 9.19 8.41 7.92 7.51

1000 10.07 9.40 8.77 8.33 7.83 7.20 6.69 6.54 6.13 5.61 5.28 5.01

750 7.55 7.05 6.58 6.25 5.87 5.40 5.02 4.90 4.60 4.21 3.96 3.76

1500 20.14 18.80 17.54 16.66 15.66 14.41 13.38 13.07 12.26 11.21 10.55 10.02

1000 13.43 12.53 11.70 11.10 10.44 9.60 8.92 8.71 8.17 7.48 7.04 6.68

750 10.07 9.40 8.77 8.33 7.83 7.20 6.69 6.54 6.13 5.61 5.28 5.01

1500 25.18 23.50 21.93 20.82 19.58 18.01 16.73 16.34 15.32 14.02 13.19 12.52

1000 16.78 15.66 14.62 13.88 13.05 12.01 11.15 10.89 10.22 9.35 8.80 8.35

750 12.59 11.75 10.97 10.41 9.79 9.00 8.36 8.17 7.66 7.01 6.60 6.26

1500 41.29 38.54 35.97 34.15 32.11 29.53 27.43 26.80 25.13 22.99 21.64 20.54

1000 27.53 25.69 23.98 22.76 21.41 19.69 18.29 17.86 16.75 15.33 14.43 13.69

750 20.64 19.27 17.98 17.07 16.06 14.77 13.72 13.40 12.57 11.49 10.82 10.27

1500 61.43 57.33 53.51 50.80 47.78 43.94 40.81 39.87 37.39 34.20 32.19 30.56

1000 40.95 38.22 35.67 33.87 31.85 29.29 27.21 26.58 24.93 22.80 21.46 20.37

750 30.71 28.67 26.76 25.40 23.89 21.97 20.41 19.93 18.70 17.10 16.10 15.28

1500 87.61 81.77 76.32 72.45 68.14 62.67 58.21 56.86 53.33 48.78 45.91 43.58

1000 58.41 54.51 50.88 48.30 45.43 41.78 38.81 37.91 35.55 32.52 30.61 29.06

750 43.81 40.89 38.16 36.23 34.07 31.34 29.10 28.43 26.66 24.39 22.96 21.79

1500 118.83 110.91 103.51 98.27 92.42 85.00 78.95 77.12 72.33 66.17 62.27 59.11

1000 79.22 73.94 69.01 65.51 61.62 56.67 52.63 51.41 48.22 44.11 41.52 39.41

750 59.41 55.45 51.76 49.14 46.21 42.50 39.48 38.56 36.17 33.08 31.14 29.56

1500 184.29 172.00 160.53 152.41 143.33 131.83 122.44 119.60 112.17 102.61 96.58 91.68

1000 122 86 114 67 107 02 101 60 95 56 87 88 81 63 79 74 74 78 68 41 64 39 61 12

160 1610


T2 Nm n1 rpm

288

518

828

1150

2300

3105

3795

4945

6095

7475

8970

12650

17250

23000

28750

47150

290

Size

180

200

225

70150

100050

135700

210450

Ratios 196 - 394

95

110

125

140

500

REDUCTION RATIO

250

250M

GREAVES PLANETARY TRIPLE REDUCTION RATINGS

850

560

630

720

320

360

400

440

270


17/81

405 430 456 472 501 533 564 599 625 665 710

1500 0.19 0.18 0.17 0.17 0.16 0.15 0.14 0.13 0.13 0.12 0.11

1000 0.13 0.12 0.12 0.11 0.11 0.10 0.09 0.09 0.08 0.08 0.07

750 0.10 0.09 0.09 0.08 0.08 0.07 0.07 0.07 0.06 0.06 0.06

1500 0.31 0.29 0.27 0.26 0.25 0.23 0.22 0.21 0.20 0.19 0.18

1000 0.20 0.19 0.18 0.18 0.17 0.16 0.15 0.14 0.13 0.12 0.12

750 0.15 0.14 0.14 0.13 0.12 0.12 0.11 0.10 0.10 0.09 0.09

1500 0.46 0.44 0.41 0.40 0.37 0.35 0.33 0.31 0.30 0.28 0.26

1000 0.31 0.29 0.27 0.26 0.25 0.23 0.22 0.21 0.20 0.19 0.18

750 0.23 0.22 0.21 0.20 0.19 0.18 0.17 0.16 0.15 0.14 0.13

1500 0.66 0.62 0.58 0.56 0.53 0.50 0.47 0.44 0.43 0.40 0.38

1000 0.44 0.41 0.39 0.38 0.35 0.33 0.31 0.30 0.28 0.27 0.25

750 0.33 0.31 0.29 0.28 0.27 0.25 0.24 0.22 0.21 0.20 0.19

1500 0.88 0.83 0.78 0.75 0.71 0.67 0.63 0.59 0.57 0.53 0.50

1000 0.58 0.55 0.52 0.50 0.47 0.44 0.42 0.40 0.38 0.36 0.33

750 0.45 0.43 0.40 0.39 0.37 0.34 0.32 0.31 0.29 0.28 0.26

1500 1.17 1.10 1.04 1.00 0.95 0.89 0.84 0.79 0.76 0.71 0.67

1000 0.78 0.73 0.69 0.67 0.63 0.59 0.56 0.53 0.51 0.47 0.44

750 0.58 0.55 0.52 0.50 0.47 0.44 0.42 0.40 0.38 0.36 0.33

1500 1.51 1.42 1.34 1.30 1.22 1.15 1.08 1.02 0.98 0.92 0.86

1000 1.01 0.95 0.89 0.86 0.81 0.77 0.72 0.68 0.65 0.61 0.57

750 0.76 0.71 0.67 0.65 0.61 0.57 0.54 0.51 0.49 0.46 0.43

1500 1.95 1.84 1.73 1.67 1.58 1.48 1.40 1.32 1.26 1.19 1.11

1000 1.30 1.22 1.15 1.12 1.05 0.99 0.93 0.88 0.84 0.79 0.74

750 0.97 0.92 0.87 0.84 0.79 0.74 0.70 0.66 0.63 0.59 0.56

1500 2.44 2.30 2.16 2.09 1.97 1.85 1.75 1.65 1.58 1.48 1.39

1000 1.62 1.53 1.44 1.39 1.31 1.23 1.17 1.10 1.05 0.99 0.93

750 1.22 1.15 1.08 1.05 0.98 0.93 0.87 0.82 0.79 0.74 0.69

1500 2.92 2.75 2.60 2.51 2.36 2.22 2.10 1.98 1.89 1.78 1.67

1000 1.95 1.84 1.73 1.67 1.58 1.48 1.40 1.32 1.26 1.19 1.11

750 1.46 1.38 1.30 1.25 1.18 1.11 1.05 0.99 0.95 0.89 0.83

1500 3.51 3.30 3.12 3.01 2.84 2.67 2.52 2.37 2.27 2.14 2.00

1000 2.34 2.20 2.08 2.01 1.89 1.78 1.68 1.58 1.52 1.42 1.33

750 1.75 1.65 1.56 1.51 1.42 1.33 1.26 1.19 1.14 1.07 1.00

1500 5.02 4.73 4.46 4.31 4.06 3.81 3.60 3.39 3.25 3.06 2.86

1000 3.35 3.15 2.97 2.87 2.71 2.54 2.40 2.26 2.17 2.04 1.91

750 2.51 2.36 2.23 2.15 2.03 1.91 1.80 1.70 1.63 1.53 1.43

1500 6.82 6.43 6.06 5.85 5.52 5.18 4.90 4.61 4.42 4.16 3.89

1000 4.55 4.28 4.04 3.90 3.68 3.46 3.27 3.08 2.95 2.77 2.59

750 3.41 3.21 3.03 2.93 2.76 2.59 2.45 2.31 2.21 2.08 1.95

1500 9.02 8.49 8.01 7.74 7.29 6.85 6.47 6.10 5.84 5.49 5.14

1000 6.01 5.66 5.34 5.16 4.86 4.57 4.32 4.06 3.89 3.66 3.43

750 4.51 4.25 4.00 3.87 3.64 3.43 3.24 3.05 2.92 2.75 2.57

1500 11.70 11.02 10.39 10.04 9.46 8.89 8.40 7.91 7.58 7.12 6.67

1000 7.80 7.34 6.93 6.69 6.30 5.93 5.60 5.27 5.05 4.75 4.45

750 5.85 5.51 5.19 5.02 4.73 4.44 4.20 3.95 3.79 3.56 3.34

1500 18.28 17.21 16.23 15.68 14.77 13.89 13.12 12.36 11.84 11.13 10.42

1000 12.18 11.48 10.82 10.45 9.85 9.26 8.75 8.24 7.90 7.42 6.95 750 9.14 8.61 8.12 7.84 7.39 6.94 6.56 6.18 5.92 5.57 5.21

1500 26.80 25.25 23.81 23.00 21.67 20.37 19.25 18.12 17.37 16.32 15.29

1000 17.87 16.83 15.87 15.33 14.45 13.58 12.83 12.08 11.58 10.88 10.19

750 13.40 12.62 11.90 11.50 10.83 10.18 9.62 9.06 8.68 8.16 7.64

1500 37.77 35.57 33.55 32.41 30.53 28.70 27.12 25.54 24.47 23.00 21.54

1000 25.18 23.72 22.36 21.61 20.35 19.13 18.08 17.02 16.32 15.34 14.36

750 18.88 17.79 16.77 16.20 15.27 14.35 13.56 12.77 12.24 11.50 10.77

1500 49.22 46.36 43.72 42.24 39.79 37.40 35.35 33.28 31.90 29.98 28.08

1000 32.82 30.91 29.14 28.16 26.53 24.93 23.56 22.19 21.26 19.99 18.72

750 24.61 23.18 21.86 21.12 19.90 18.70 17.67 16.64 15.95 14.99 14.04

1500 84.80 79.87 75.32 72.76 68.55 64.43 60.89 57.34 54.95 51.64 48.37

1000 56.53 53.25 50.21 48.51 45.70 42.96 40.60 38.22 36.63 34.43 32.25

750 42.40 39.93 37.66 36.38 34.28 32.22 30.45 28.67 27.47 25.82 24.19

1500 130.61 123.02 116.00 112.07 105.58 99.24 93.79 88.31 84.64 79.54 74.50

1000 87.07 82.01 77.34 74.71 70.39 66.16 62.53 58.87 56.42 53.03 49.67

750 65.31 61.51 58.00 56.04 52.79 49.62 46.89 44.15 42.32 39.77 37.25

1500 197.38 185.90 175.30 169.36 159.56 149.98 141.73 133.45 127.90 120.21 112.59

1000 131.58 123.93 116.87 112.91 106.37 99.98 94.49 88.97 85.27 80.14 75.06

750 98 69 92 95 87 65 84 68 79 78 74 99 70 87 66 73 63 95 60 10 56 29

200100

308200

465750

43125

63250

89125

116150

GREAVES PLANETARY QUADRUPLE REDUCTION RATINGS

n 1 rpm

REDUCTION RATIO

P in kW. MECHANICAL

Ratios 405 - 752

Size T 2 Nm

2070

5750

27600

8280

11845

16100

21275

6900

2760

4600

46095

225

225M

160

725

1093

1553

200

110

720

850

980

440

500

560

630

180

180M

125

140

3565

360

250

270

320

340


18/81

783 800 830 880 900 955 1005 1065 1095 1135 1160 1180

1500 0.10 0.10 0.10 0.09 0.09 0.08 0.08 0.07 0.07 0.07 0.07 0.07

1000 0.07 0.07 0.06 0.06 0.06 0.06 0.05 0.05 0.05 0.05 0.05 0.04

750 0.05 0.05 0.05 0.04 0.04 0.04 0.04 0.04 0.04 0.03 0.03 0.03

1500 0.16 0.16 0.15 0.14 0.14 0.13 0.12 0.12 0.11 0.11 0.11 0.11

1000 0.11 0.10 0.10 0.09 0.09 0.09 0.08 0.08 0.08 0.07 0.07 0.07

750 0.08 0.08 0.07 0.07 0.07 0.07 0.06 0.06 0.06 0.05 0.05 0.051500 0.24 0.23 0.23 0.21 0.21 0.20 0.19 0.18 0.17 0.17 0.16 0.16

1000 0.16 0.16 0.15 0.14 0.14 0.13 0.12 0.12 0.11 0.11 0.11 0.11

750 0.12 0.12 0.11 0.11 0.10 0.10 0.09 0.09 0.09 0.08 0.08 0.08

1500 0.34 0.33 0.32 0.30 0.30 0.28 0.27 0.25 0.24 0.23 0.23 0.23

1000 0.23 0.22 0.21 0.20 0.20 0.19 0.18 0.17 0.16 0.16 0.15 0.15

750 0.17 0.17 0.16 0.15 0.15 0.14 0.13 0.13 0.12 0.12 0.11 0.11

1500 0.45 0.44 0.43 0.40 0.39 0.37 0.35 0.33 0.32 0.31 0.31 0.30

1000 0.30 0.30 0.29 0.27 0.26 0.25 0.24 0.22 0.22 0.21 0.20 0.20

750 0.23 0.23 0.22 0.21 0.20 0.19 0.18 0.17 0.17 0.16 0.16 0.16

1500 0.60 0.59 0.57 0.54 0.53 0.50 0.47 0.44 0.43 0.42 0.41 0.40

1000 0.40 0.39 0.38 0.36 0.35 0.33 0.31 0.30 0.29 0.28 0.27 0.27

750 0.30 0.30 0.29 0.27 0.26 0.25 0.24 0.22 0.22 0.21 0.20 0.20

1500 0.78 0.76 0.74 0.70 0.68 0.64 0.61 0.57 0.56 0.54 0.53 0.52

1000 0.52 0.51 0.49 0.46 0.45 0.43 0.41 0.38 0.37 0.36 0.35 0.35

750 0.39 0.38 0.37 0.35 0.34 0.32 0.30 0.29 0.28 0.27 0.26 0.26

1500 1.01 0.99 0.95 0.90 0.88 0.83 0.79 0.74 0.72 0.70 0.68 0.671000 0.67 0.66 0.63 0.60 0.58 0.55 0.52 0.49 0.48 0.46 0.45 0.45

750 0.50 0.49 0.48 0.45 0.44 0.41 0.39 0.37 0.36 0.35 0.34 0.33

1500 1.26 1.23 1.19 1.12 1.10 1.03 0.98 0.93 0.90 0.87 0.85 0.84

1000 0.84 0.82 0.79 0.75 0.73 0.69 0.65 0.62 0.60 0.58 0.57 0.56

750 0.63 0.62 0.59 0.56 0.55 0.52 0.49 0.46 0.45 0.43 0.43 0.42

1500 1.51 1.48 1.43 1.35 1.32 1.24 1.18 1.11 1.08 1.04 1.02 1.00

1000 1.01 0.99 0.95 0.90 0.88 0.83 0.79 0.74 0.72 0.70 0.68 0.67

750 0.76 0.74 0.71 0.67 0.66 0.62 0.59 0.56 0.54 0.52 0.51 0.50

1500 1.81 1.78 1.71 1.61 1.58 1.49 1.41 1.33 1.30 1.25 1.23 1.20

1000 1.21 1.18 1.14 1.08 1.05 0.99 0.94 0.89 0.87 0.83 0.82 0.80

750 0.91 0.89 0.86 0.81 0.79 0.74 0.71 0.67 0.65 0.63 0.61 0.60

1500 2.60 2.54 2.45 2.31 2.26 2.13 2.02 1.91 1.86 1.79 1.75 1.72

1000 1.73 1.69 1.63 1.54 1.51 1.42 1.35 1.27 1.24 1.19 1.17 1.15

750 1.30 1.27 1.22 1.16 1.13 1.06 1.01 0.95 0.93 0.90 0.88 0.86

1500 3.53 3.45 3.33 3.14 3.07 2.89 2.75 2.59 2.52 2.43 2.38 2.34

1000 2.35 2.30 2.22 2.09 2.05 1.93 1.83 1.73 1.68 1.62 1.59 1.56750 1.76 1.73 1.66 1.57 1.54 1.45 1.37 1.30 1.26 1.22 1.19 1.17

1500 4.66 4.56 4.40 4.15 4.06 3.82 3.63 3.43 3.33 3.22 3.15 3.09

1000 3.11 3.04 2.93 2.77 2.70 2.55 2.42 2.29 2.22 2.14 2.10 2.06

750 2.33 2.28 2.20 2.07 2.03 1.91 1.82 1.71 1.67 1.61 1.57 1.55

1500 6.05 5.92 5.71 5.38 5.26 4.96 4.71 4.45 4.33 4.17 4.08 4.01

1000 4.03 3.95 3.80 3.59 3.51 3.31 3.14 2.97 2.88 2.78 2.72 2.68

750 3.02 2.96 2.85 2.69 2.63 2.48 2.36 2.22 2.16 2.09 2.04 2.01

1500 9.45 9.25 8.92 8.41 8.22 7.75 7.36 6.95 6.76 6.52 6.38 6.27

1000 6.30 6.17 5.95 5.61 5.48 5.17 4.91 4.63 4.51 4.35 4.25 4.18

750 4.73 4.63 4.46 4.21 4.11 3.88 3.68 3.47 3.38 3.26 3.19 3.14

1500 13.86 13.57 13.08 12.34 12.06 11.37 10.80 10.19 9.91 9.56 9.36 9.20

1000 9.24 9.05 8.72 8.22 8.04 7.58 7.20 6.80 6.61 6.38 6.24 6.13

750 6.93 6.78 6.54 6.17 6.03 5.68 5.40 5.10 4.96 4.78 4.68 4.60

1500 19.54 19.12 18.43 17.38 17.00 16.02 15.22 14.36 13.97 13.48 13.19 12.96

1000 13.02 12.75 12.29 11.59 11.33 10.68 10.15 9.58 9.31 8.98 8.79 8.64

750 9.77 9.56 9.21 8.69 8.50 8.01 7.61 7.18 6.98 6.74 6.59 6.481500 25.46 24.92 24.02 22.65 22.15 20.87 19.84 18.72 18.21 17.56 17.19 16.89

1000 16.97 16.61 16.01 15.10 14.77 13.92 13.22 12.48 12.14 11.71 11.46 11.26

750 12.73 12.46 12.01 11.33 11.08 10.44 9.92 9.36 9.10 8.78 8.59 8.45

1500 43.86 42.93 41.38 39.03 38.16 35.96 34.17 32.25 31.36 30.26 29.61 29.10

1000 29.24 28.62 27.59 26.02 25.44 23.97 22.78 21.50 20.91 20.17 19.74 19.40

750 21.93 21.46 20.69 19.51 19.08 17.98 17.09 16.12 15.68 15.13 14.80 14.55

1500 67.56 66.12 63.73 60.11 58.77 55.39 52.63 49.67 48.31 46.61 45.60 44.83

1000 45.04 44.08 42.49 40.07 39.18 36.93 35.09 33.11 32.21 31.07 30.40 29.89

750 33.78 33.06 31.87 30.06 29.39 27.69 26.32 24.83 24.15 23.30 22.80 22.41

1500 102.09 99.92 96.31 90.84 88.82 83.70 79.54 75.06 73.00 70.43 68.91 67.74

1000 68.06 66.61 64.21 60.56 59.21 55.80 53.03 50.04 48.67 46.95 45.94 45.16

750 51.05 49.96 48.16 45.42 44.41 41.85 39.77 37.53 36.50 35.21 34.46 33.87

Check with factory for requirements of forced lubrication before offering.

850 308200

980 465750

630 116150

720 200100

500 63250

560 89125

360 27600

440 43125

320 16100

340 21275

250 8280

270 11845

225 5750

225M 6900

460

725

1093

140 1553


95

110

125

REDUCTION RATIO

P in kW MECHANICAL

Ratios 783 - 1180

SIZE T2 Nm n 1 rpm

180M 3565

200 4600

160 2070

180 2760


19/81

1210 1230 1250 1285 1330 1360 1410 1445 1495 1575 1665 1770

1500 0.07 0.06 0.06 0.06 0.06 0.06 0.06 0.05 0.05 0.05 0.05 0.04

1000 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.03 0.03

750 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.02 0.02

1500 0.10 0.10 0.10 0.10 0.09 0.09 0.09 0.09 0.08 0.08 0.07 0.07

1000 0.07 0.07 0.07 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.05 0.05

750 0.05 0.05 0.05 0.05 0.05 0.05 0.04 0.04 0.04 0.04 0.04 0.04

1500 0.15 0.15 0.15 0.15 0.14 0.14 0.13 0.13 0.13 0.13 0.11 0.11

1000 0.10 0.10 0.10 0.10 0.09 0.09 0.09 0.09 0.08 0.08 0.08 0.07

750 0.08 0.08 0.08 0.07 0.07 0.07 0.07 0.06 0.06 0.06 0.06 0.05

1500 0.22 0.22 0.21 0.21 0.20 0.20 0.19 0.18 0.18 0.18 0.16 0.15

1000 0.15 0.14 0.14 0.14 0.13 0.13 0.13 0.12 0.12 0.12 0.11 0.10

750 0.11 0.11 0.11 0.10 0.10 0.10 0.09 0.09 0.09 0.09 0.08 0.08

1500 0.29 0.29 0.28 0.28 0.27 0.26 0.25 0.25 0.24 0.24 0.21 0.20

1000 0.20 0.19 0.19 0.18 0.18 0.17 0.17 0.16 0.16 0.16 0.14 0.13

750 0.15 0.15 0.15 0.14 0.14 0.13 0.13 0.13 0.12 0.12 0.11 0.10

1500 0.39 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.32 0.28 0.27

1000 0.26 0.26 0.25 0.25 0.24 0.23 0.22 0.22 0.21 0.21 0.19 0.18

750 0.20 0.19 0.19 0.18 0.18 0.17 0.17 0.16 0.16 0.16 0.14 0.13

1500 0.51 0.50 0.49 0.48 0.46 0.45 0.43 0.42 0.41 0.41 0.37 0.35

1000 0.34 0.33 0.33 0.32 0.31 0.30 0.29 0.28 0.27 0.28 0.24 0.23

750 0.25 0.25 0.24 0.24 0.23 0.22 0.22 0.21 0.20 0.21 0.18 0.171500 0.65 0.64 0.63 0.61 0.59 0.58 0.56 0.55 0.53 0.54 0.47 0.45

1000 0.43 0.43 0.42 0.41 0.40 0.39 0.37 0.36 0.35 0.36 0.32 0.30

750 0.33 0.32 0.32 0.31 0.30 0.29 0.28 0.27 0.26 0.27 0.24 0.22

1500 0.82 0.80 0.79 0.77 0.74 0.73 0.70 0.68 0.66 0.67 0.59 0.56

1000 0.54 0.53 0.53 0.51 0.49 0.48 0.47 0.46 0.44 0.45 0.40 0.37

750 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 0.30 0.28

1500 0.98 0.96 0.95 0.92 0.89 0.87 0.84 0.82 0.79 0.80 0.71 0.67

1000 0.65 0.64 0.63 0.61 0.59 0.58 0.56 0.55 0.53 0.54 0.47 0.45

750 0.49 0.48 0.47 0.46 0.45 0.44 0.42 0.41 0.40 0.40 0.36 0.33

1500 1.17 1.16 1.14 1.11 1.07 1.04 1.01 0.98 0.95 0.96 0.85 0.80

1000 0.78 0.77 0.76 0.74 0.71 0.70 0.67 0.66 0.63 0.64 0.57 0.54

750 0.59 0.58 0.57 0.55 0.53 0.52 0.50 0.49 0.48 0.48 0.43 0.40

1500 1.68 1.65 1.63 1.58 1.53 1.49 1.44 1.41 1.36 1.38 1.22 1.15

1000 1.12 1.10 1.08 1.05 1.02 1.00 0.96 0.94 0.91 0.92 0.81 0.77

750 0.84 0.83 0.81 0.79 0.76 0.75 0.72 0.70 0.68 0.69 0.61 0.57

1500 2.28 2.25 2.21 2.15 2.08 2.03 1.96 1.91 1.85 1.87 1.66 1.56

1000 1.52 1.50 1.47 1.43 1.39 1.35 1.31 1.27 1.23 1.25 1.11 1.04

750 1.14 1.12 1.11 1.08 1.04 1.02 0.98 0.96 0.92 0.94 0.83 0.78

1500 3.02 2.97 2.92 2.84 2.75 2.68 2.59 2.53 2.44 2.48 2.19 2.06

1000 2.01 1.98 1.95 1.89 1.83 1.79 1.73 1.68 1.63 1.65 1.46 1.38

750 1.51 1.48 1.46 1.42 1.37 1.34 1.29 1.26 1.22 1.24 1.10 1.03

1500 3.91 3.85 3.79 3.69 3.56 3.48 3.36 3.28 3.17 3.21 2.85 2.68

1000 2.61 2.57 2.53 2.46 2.37 2.32 2.24 2.19 2.11 2.14 1.90 1.78

750 1.96 1.93 1.89 1.84 1.78 1.74 1.68 1.64 1.58 1.61 1.42 1.34

1500 6.12 6.02 5.92 5.76 5.57 5.44 5.25 5.12 4.95 5.02 4.45 4.18

1000 4.08 4.01 3.95 3.84 3.71 3.63 3.50 3.41 3.30 3.35 2.96 2.79

750 3.06 3.01 2.96 2.88 2.78 2.72 2.62 2.56 2.48 2.51 2.22 2.09

1500 8.97 8.83 8.68 8.45 8.16 7.98 7.70 7.51 7.26 7.36 6.52 6.13

1000 5.98 5.88 5.79 5.63 5.44 5.32 5.13 5.01 4.84 4.91 4.35 4.09

750 4.49 4.41 4.34 4.22 4.08 3.99 3.85 3.76 3.63 3.68 3.26 3.07

1500 12.64 12.44 12.24 11.90 11.50 11.25 10.85 10.59 10.23 10.37 9.19 8.641000 8.43 8.29 8.16 7.94 7.67 7.50 7.23 7.06 6.82 6.91 6.12 5.76

750 6.32 6.22 6.12 5.95 5.75 5.62 5.42 5.29 5.12 5.19 4.59 4.32

1500 16.48 16.21 15.95 15.51 14.99 14.66 14.14 13.80 13.33 13.52 11.97 11.2

1000 10.98 10.80 10.63 10.34 9.99 9.77 9.43 9.20 8.89 9.01 7.98 7.51

750 8.24 8.10 7.97 7.76 7.49 7.33 7.07 6.90 6.67 6.76 5.99 5.63

1500 28.38 27.92 27.47 26.73 25.82 25.25 24.36 23.77 22.97 23.28 20.63 19.4

1000 18.92 18.61 18.32 17.82 17.21 16.84 16.24 15.84 15.31 15.52 13.75 12.94

750 14.19 13.96 13.74 13.36 12.91 12.63 12.18 11.88 11.49 11.64 10.31 9.70

1500 43.72 43.01 42.32 41.17 39.77 38.89 37.52 36.61 35.38 35.86 31.77 29.8

1000 29.14 28.67 28.21 27.44 26.51 25.93 25.01 24.40 23.59 23.91 21.18 19.9

750 21.86 21.50 21.16 20.58 19.89 19.45 18.76 18.30 17.69 17.93 15.89 14.94

1500 66.06 64.99 63.95 62.21 60.10 58.78 56.69 55.32 53.47 54.20 48.01 45.1

1000 44.04 43.33 42.63 41.47 40.07 39.19 37.80 36.88 35.65 36.13 32.01 30.1

750 33.03 32.50 31.98 31.10 30.05 29.39 28.35 27.66 26.74 27.10 24.01 22.5

125 1093

95 460

110 725


Ratios 1210 - 1770

T2 Nm n 1 rpmSIZE

REDUCTION RATIO

P in kW MECHANICAL

140 1553

180 2760

160 2070

180M 3565

200 4600

225 5750

225M 6900

250 8280

270 11845

320 16100

340 21275

360 27600

630 116150

440 43125

500 63250

560 89125

980 465750

720 200100

850 308200


20/81

5.0 5.7 6.0 6.3 6.7

1500 1.79 1.58 1.49 1.43 1.33

1000 1.19 1.05 0.99 0.95 0.89

750 0.90 0.79 0.75 0.71 0.66

1500 2.13 1.88 1.77 1.69 1.58

1000 1.42 1.25 1.18 1.13 1.05

750 1.06 0.94 0.89 0.85 0.79

1500 4.10 3.62 3.42 3.27 3.05

1000 2.74 2.41 2.28 2.18 2.03

750 2.05 1.81 1.71 1.63 1.52

1500 8.21 7.24 6.84 6.53 6.09

1000 5.47 4.83 4.56 4.36 4.06

750 4.10 3.62 3.42 3.27 3.05

1500 13.80 12.18 11.50 10.99 10.25

1000 9.20 8.12 7.67 7.33 6.83

750 6.90 6.09 5.75 5.49 5.12

1500 22.38 19.75 18.65 17.82 16.62

1000 14.92 13.17 12.43 11.88 11.08

750 11.19 9.87 9.33 8.91 8.31

1500 31.71 27.98 26.42 25.24 23.55

1000 21.14 18.65 17.62 16.83 15.70

750 15.85 13.99 13.21 12.62 11.77

1500 44.76 39.50 37.30 35.64 33.24

1000 29.84 26.33 24.87 23.76 22.16

750 22.38 19.75 18.65 17.82 16.62

1500 59.68 52.66 49.74 47.52 44.32

1000 39.79 35.11 33.16 31.68 29.55

750 29.84 26.33 24.87 23.76 22.16

1500 82.07 72.41 68.39 65.34 60.94

1000 54.71 48.27 45.59 43.56 40.63

750 41.03 36.21 34.19 32.67 30.47

1500 104.45 92.16 87.04 83.16 77.56

1000 69.63 61.44 58.03 55.44 51.71

750 52.22 46.08 43.52 41.58 38.78

1500 134.29 118.49 111.91 106.92 99.72

1000 89.53 78.99 74.61 71.28 66.48

750 67.14 59.25 55.95 53.46 49.86

1500 160.40 141.53 133.67 127.71 119.11

1000 106.93 94.35 89.11 85.14 79.41

750 80.20 70.77 66.83 63.85 59.561500 205.16 181.03 170.97 163.35 152.35

1000 136.78 120.69 113.98 108.90 101.57

750 102.58 90.51 85.49 81.67 76.18

1500 242.47 213.94 202.06 193.05 180.05

1000 161.64 142.63 134.70 128.70 120.03

750 121.23 106.97 101.03 96.52 90.03

1500 328.26 289.64 273.55 261.36 243.76

1000 218.84 193.10 182.37 174.24 162.51

750 164.13 144.82 136.78 130.68 121.88

1500 428.98 378.51 357.48 341.55 318.55

1000 285.99 252.34 238.32 227.70 212.37

750 214.49 189.26 178.74 170.77 159.28

1500 596.84 526.63 497.37 475.19 443.20

1000 397.90 351.08 331.58 316.80 295.47

750 298 42 263 31 248 68 237 60 221 60

345L

1380

GREAVES BEVEL PLANETARY SINGLE REDUCTION RATINGS

SpecialsonEnquiry

690

175L 978

155L

19.6

21.4

25.37

Ratios 5 - 6.7

7475

66

100L 127

140L 426

110L

240L

200L


Size T2 Nm n1 rpm

REDUCTION RATIOP. kW

Thermal

>P.kW.Mech

390L 10120

253

65L 55

70L

220L 1840

8.81

13.33

15.33

17.67

2530

305L 4945

330L 6325

32.37270L 3220

285L 4140 35.27

440L 13225

480L 18400


21/81

7.5 8.3 8.9 9.6 10.1

1500 3.21 2.91 2.72 2.53 2.401000 2.14 1.94 1.81 1.68 1.60

750 1.60 1.45 1.36 1.26 1.20

1500 3.95 3.58 3.35 3.11 2.95

1000 2.63 2.39 2.23 2.07 1.97

750 1.97 1.79 1.68 1.55 1.48

1500 7.89 7.16 6.70 6.22 5.91

1000 5.26 4.77 4.47 4.14 3.94

750 3.95 3.58 3.35 3.11 2.95

1500 14.80 13.43 12.56 11.66 11.07

1000 9.87 8.95 8.38 7.77 7.38

750 7.40 6.71 6.28 5.83 5.54

1500 24.67 22.38 20.94 19.43 18.45

1000 16.45 14.92 13.96 12.95 12.30750 12.34 11.19 10.47 9.71 9.23

1500 39.47 35.81 33.51 31.09 29.53

1000 26.32 23.87 22.34 20.72 19.68

750 19.74 17.91 16.75 15.54 14.76

1500 59.21 53.72 50.26 46.63 44.29

1000 39.47 35.81 33.51 31.09 29.53

750 29.61 26.86 25.13 23.31 22.15

1500 81.41 73.86 69.10 64.11 60.90

1000 54.28 49.24 46.07 42.74 40.60

750 40.71 36.93 34.55 32.06 30.45

1500 111.02 100.72 94.23 87.43 83.05

1000 74.01 67.14 62.82 58.29 55.36

750 55.51 50.36 47.12 43.71 41.52

1500 148.03 134.29 125.65 116.57 110.73

1000 98.68 89.53 83.76 77.71 73.82

750 74.01 67.14 62.82 58.29 55.36

1500 192.43 174.58 163.34 151.54 143.95

1000 128.29 116.38 108.89 101.03 95.96

750 96.22 87.29 81.67 75.77 71.97

1500 241.78 219.34 205.22 190.40 180.85

1000 161.18 146.23 136.81 126.93 120.57

750 120.89 109.67 102.61 95.20 90.43

1500 305.92 277.53 259.67 240.91 228.84

1000 203.95 185.02 173.11 160.61 152.56

750 152.96 138.77 129.83 120.46 114.421500 370.07 335.72 314.11 291.43 276.82

1000 246.71 223.82 209.41 194.28 184.54

750 185.03 167.86 157.06 145.71 138.41

1500 444.08 402.87 376.94 349.71 332.18

1000 296.05 268.58 251.29 233.14 221.45

750 222.04 201.43 188.47 174.86 166.09

1500 616.78 559.54 523.52 485.71 461.36

1000 411.18 373.03 349.01 323.81 307.57

750 308.39 279.77 261.76 242.86 230.68

1500 838.82 760.97 711.99 660.57 627.45

1000 559.21 507.32 474.66 440.38 418.30

750 419.41 380.49 355.99 330.28 313.73

1500 1085.53 984.79 921.40 854.85 812.001000 723.69 656.53 614.27 569.90 541.33

750 542 76 492 40 460 70 427 43 406 00

270M 2760

184

140M 368

220M 1150

240M

>P.kW.Mech

17.67


1840

REDUCTION RATIO

Ratios 7.5 - 10.1

P. kW

ThermalP.in. kW. Mechanical

Size T2 Nm n1 rpm

345M 5175

305M 3795

690

100M 150

110M

175M

19.6

25.37

32.37

38.06

58

560M 20700

390M

Specialson

Enq

uiry

520M 17250

670M 39100

750M

6900

480M 14260

50600

420M 8970

440M 11270

610M 28750


22/81

10.7 11.6 12.5 13.6

1500 2.96 2.72 2.52 2.321000 1.97 1.81 1.68 1.55

750 1.48 1.36 1.26 1.16

1500 3.65 3.36 3.12 2.86

1000 2.44 2.24 2.08 1.91

750 1.83 1.68 1.56 1.43

1500 7.31 6.72 6.23 5.73

1000 4.87 4.48 4.15 3.82

750 3.65 3.36 3.12 2.86

1500 13.05 12.00 11.13 10.23

1000 8.70 8.00 7.42 6.82

750 6.52 6.00 5.56 5.11

1500 23.49 21.61 20.03 18.41

1000 15.66 14.40 13.35 12.27

750 11.74 10.80 10.01 9.20

1500 36.54 33.61 31.15 28.63

1000 24.36 22.41 20.77 19.09

750 18.27 16.81 15.58 14.32

1500 53.94 49.62 45.99 42.27

1000 35.96 33.08 30.66 28.18

750 26.97 24.81 22.99 21.13

1500 76.55 70.42 65.27 59.99

1000 51.04 46.95 43.51 39.99

750 38.28 35.21 32.63 29.99

1500 104.39 96.03 89.00 81.80

1000 69.59 64.02 59.34 54.54

750 52.20 48.02 44.50 40.90

1500 139.19 128.04 118.67 109.07

1000 92.79 85.36 79.11 72.71

750 69.59 64.02 59.34 54.54

1500 182.69 168.05 155.76 143.16

1000 121.79 112.04 103.84 95.44

750 91.34 84.03 77.88 71.58

1500 217.48 200.06 185.43 170.43

1000 144.99 133.38 123.62 113.62

750 108.74 100.03 92.71 85.21

1500 278.38 256.08 237.34 218.14

1000 185.59 170.72 158.23 145.43

750 139.19 128.04 118.67 109.071500 339.27 312.10 289.26 265.86

1000 226.18 208.07 192.84 177.24

750 169.64 156.05 144.63 132.93

1500 408.87 376.12 348.60 320.40

1000 272.58 250.75 232.40 213.60

750 204.43 188.06 174.30 160.20

1500 574.16 528.17 489.52 449.92

1000 382.77 352.11 326.35 299.95

750 287.08 264.09 244.76 224.96

1500 791.64 728.23 674.95 620.35

1000 527.76 485.49 449.97 413.57

750 395.82 364.12 337.47 310.17

1500 1026.52 944.30 875.21 804.41

1000 684.35 629.54 583.47 536.27

750 513 26 472 15 437 60 402 20

REDUCTION RATIO

Specialsonenq

uiry

14375

700H 22425

940H 52325

>P.k

W.

Mech

9200

240H 863

2415

390H

1080H 67850

560H

1553

750H 27025

870H 37950

520H

420H 5060

12075

610H

n1 rpm

670H 18400

140H 196

155H 242

200H 483

285H


3565

330H

480H 6900

Ratios 10.7 - 13.6

P. kW

ThermalP.in. kW. Mechanical

Size T2 Nm


23/81

19 27 33 36 40 44 47 51

1500 1.70 1.19 0.95 0.88 0.79 0.72 0.68 0.62

1000 1.13 0.79 0.63 0.59 0.53 0.48 0.45 0.42

750 0.85 0.59 0.47 0.44 0.40 0.36 0.34 0.31

1500 3.18 2.23 1.78 1.65 1.48 1.35 1.27 1.17

1000 2.12 1.48 1.19 1.10 0.99 0.90 0.85 0.78

750 1.59 1.11 0.89 0.82 0.74 0.67 0.64 0.59

1500 5.83 4.08 3.26 3.02 2.72 2.47 2.33 2.15

1000 3.89 2.72 2.18 2.02 1.81 1.65 1.55 1.43

750 2.92 2.04 1.63 1.51 1.36 1.24 1.17 1.07

1500 9.01 6.31 5.05 4.67 4.20 3.82 3.60 3.32

1000 6.01 4.20 3.36 3.11 2.80 2.55 2.40 2.21

750 4.51 3.15 2.52 2.34 2.10 1.91 1.80 1.66

1500 13.25 9.28 7.42 6.87 6.18 5.62 5.30 4.88

1000 8.83 6.18 4.95 4.58 4.12 3.75 3.53 3.25

750 6.43 4.50 3.60 3.34 3.00 2.73 2.57 2.37

1500 19.08 13.36 10.69 9.89 8.90 8.09 7.63 7.03

1000 12.72 8.90 7.12 6.60 5.94 5.40 5.09 4.69

750 9.54 6.68 5.34 4.95 4.45 4.05 3.82 3.51

1500 26.50 18.55 14.84 13.74 12.37 11.24 10.60 9.76

1000 17.67 12.37 9.89 9.16 8.24 7.50 7.07 6.51

750 13.25 9.28 7.42 6.87 6.18 5.62 5.30 4.88

1500 33.92 23.74 19.00 17.59 15.83 14.39 13.57 12.50

1000 22.61 15.83 12.66 11.73 10.55 9.59 9.05 8.33

750 16.96 11.87 9.50 8.79 7.91 7.20 6.78 6.25

1500 45.58 31.91 25.53 23.63 21.27 19.34 18.23 16.79

1000 30.39 21.27 17.02 15.76 14.18 12.89 12.15 11.20

750 22.79 15.95 12.76 11.82 10.64 9.67 9.12 8.40

1500 57.24 40.07 32.06 29.68 26.71 24.28 22.90 21.09

1000 38.16 26.71 21.37 19.79 17.81 16.19 15.26 14.06

750 28.62 20.03 16.03 14.84 13.36 12.14 11.45 10.541500 71.02 49.72 39.77 36.83 33.14 30.13 28.41 26.17

1000 47.35 33.14 26.51 24.55 22.10 20.09 18.94 17.44

750 35.51 24.86 19.89 18.41 16.57 15.07 14.20 13.08

1500 84.80 59.36 47.49 43.97 39.57 35.98 33.92 31.24

1000 56.53 39.57 31.66 29.31 26.38 23.98 22.61 20.83

750 42.40 29.68 23.74 21.99 19.79 17.99 16.96 15.62

1500 103.88 72.72 58.17 53.87 48.48 44.07 41.55 38.27

1000 69.26 48.48 38.78 35.91 32.32 29.38 27.70 25.52

750 51.94 36.36 29.09 26.93 24.24 22.04 20.78 19.14

1500 148.40 103.88 83.11 76.95 69.26 62.96 59.36 54.68

1000 98.94 69.26 55.40 51.30 46.17 41.97 39.57 36.45

750 74.20 51.94 41.55 38.48 34.63 31.48 29.68 27.34

1500 196.11 137.27 109.82 101.68 91.52 83.20 78.44 72.25

1000 130.74 91.52 73.21 67.79 61.01 55.46 52.29 48.17

750 98.05 68.64 54.91 50.84 45.76 41.60 39.22 36.12

1500 254.41 178.08 142.47 131.91 118.72 107.93 101.76 93.73

1000 169.60 118.72 94.98 87.94 79.15 71.95 67.84 62.49

750 127.20 89.04 71.23 65.96 59.36 53.97 50.88 46.86

1500 339.21 237.45 189.96 175.89 158.30 143.91 135.68 124.97

1000 226.14 158.30 126.64 117.26 105.53 95.94 90.46 83.31

750 169.60 118.72 94.98 87.94 79.15 71.95 67.84 62.49

1500 524.71 367.30 293.84 272.07 244.87 222.61 209.89 193.32

1000 349.81 244.87 195.89 181.38 163.24 148.40 139.92 128.88

750 262.36 183.65 146.92 136.04 122.43 111.30 104.94 96.66

1500 773.82 541.67 433.34 401.24 361.12 328.29 309.53 285.09

1000 515.88 361.12 288.89 267.49 240.74 218.86 206.35 190.06

750 386.91 270.84 216.67 200.62 180.56 164.14 154.76 142.55

1500 1091.83 764.28 611.42 566.13 509.52 463.20 436.73 402.25

1000 727.89 509.52 407.62 377.42 339.68 308.80 291.15 268.17

750 545.91 382.14 305.71 283.07 254.76 231.60 218.37 201.13

83950

118450

36800

16100

56925

21275

27600

GREAVES BEVEL PLANETARY DOUBLE REDUCTION RATINGS

633

978

180 1438

110

140

160

P.kW

Thermal

Ratios 19 - 51

184

345

Size T2 Nm n1 rpm

P in kW.MECHANICAL

REDUCTION RATIO

95

>P2.

Mechanical

forthermalratingcapacitiesandforced

co

olingrequirements'

37.36

47.15

53.82

55.19

25.09

800

12.8

27.79

33.9

14.76

18.37

20.73

4945

500

560

630

720

440

250

270

290

320

3680

340

360

400

6210

7705

9200

11270

200

225

2070

2875


24/81

Ratios 55 - 85

55 60 63 67 73 77 80 85

1500 0.58 0.53 0.51 0.47 0.43 0.41 0.40 0.37

1000 0.39 0.35 0.34 0.32 0.29 0.27 0.26 0.25

750 0.29 0.26 0.25 0.24 0.22 0.20 0.20 0.19

1500 1.09 0.99 0.95 0.89 0.81 0.77 0.74 0.70

1000 0.72 0.66 0.63 0.59 0.54 0.51 0.49 0.46

750 0.54 0.49 0.47 0.45 0.40 0.38 0.37 0.351500 1.99 1.81 1.74 1.63 1.48 1.41 1.36 1.28

1000 1.33 1.21 1.16 1.09 0.99 0.94 0.91 0.85

750 1.00 0.91 0.87 0.82 0.74 0.70 0.68 0.64

1500 3.08 2.80 2.68 2.52 2.29 2.17 2.10 1.97

1000 2.05 1.87 1.79 1.68 1.53 1.45 1.40 1.31

750 1.54 1.40 1.34 1.26 1.15 1.09 1.05 0.99

1500 4.52 4.12 3.95 3.71 3.37 3.20 3.09 2.90

1000 3.02 2.75 2.63 2.47 2.25 2.13 2.06 1.93

750 2.20 2.00 1.92 1.80 1.64 1.55 1.50 1.41

1500 6.52 5.94 5.68 5.34 4.86 4.61 4.45 4.17

1000 4.34 3.96 3.79 3.56 3.24 3.07 2.97 2.78

750 3.26 2.97 2.84 2.67 2.43 2.30 2.23 2.09

1500 9.05 8.24 7.89 7.42 6.75 6.40 6.18 5.80

1000 6.03 5.50 5.26 4.95 4.50 4.26 4.12 3.86

750 4.52 4.12 3.95 3.71 3.37 3.20 3.09 2.90

1500 11.58 10.55 10.10 9.50 8.63 8.19 7.91 7.42

1000 7.72 7.04 6.74 6.33 5.76 5.46 5.28 4.95

750 5.79 5.28 5.05 4.75 4.32 4.09 3.96 3.71

1500 15.56 14.18 13.58 12.76 11.60 11.00 10.64 9.97

1000 10.38 9.45 9.05 8.51 7.73 7.33 7.09 6.65

750 7.78 7.09 6.79 6.38 5.80 5.50 5.32 4.99

1500 19.55 17.81 17.05 16.03 14.57 13.82 13.36 12.52

1000 13.03 11.87 11.37 10.69 9.71 9.21 8.90 8.35

750 9.77 8.90 8.53 8.01 7.29 6.91 6.68 6.26

1500 24.25 22.10 21.16 19.89 18.08 17.14 16.57 15.54

1000 16.17 14.73 14.10 13.26 12.05 11.43 11.05 10.36

750 12.13 11.05 10.58 9.94 9.04 8.57 8.29 7.77

1500 28.96 26.38 25.26 23.74 21.59 20.47 19.79 18.55

1000 19.30 17.59 16.84 15.83 14.39 13.65 13.19 12.37750 14.48 13.19 12.63 11.87 10.79 10.23 9.89 9.28

1500 35.47 32.32 30.94 29.09 26.44 25.08 24.24 22.72

1000 23.65 21.55 20.63 19.39 17.63 16.72 16.16 15.15

750 17.74 16.16 15.47 14.54 13.22 12.54 12.12 11.36

1500 50.67 46.17 44.21 41.55 37.78 35.82 34.63 32.46

1000 33.78 30.78 29.47 27.70 25.18 23.88 23.09 21.64

750 25.34 23.09 22.10 20.78 18.89 17.91 17.31 16.23

1500 66.96 61.01 58.41 54.91 49.92 47.34 45.76 42.90

1000 44.64 40.67 38.94 36.61 33.28 31.56 30.51 28.60

750 33.48 30.51 29.21 27.45 24.96 23.67 22.88 21.45

1500 86.87 79.15 75.78 71.23 64.76 61.41 59.36 55.65

1000 57.91 52.77 50.52 47.49 43.17 40.94 39.57 37.10

750 43.44 39.57 37.89 35.62 32.38 30.70 29.68 27.83

1500 115.83 105.53 101.04 94.98 86.34 81.88 79.15 74.20

1000 77.22 70.35 67.36 63.32 57.56 54.59 52.77 49.47

750 57.91 52.77 50.52 47.49 43.17 40.94 39.57 37.10

1500 179.17 163.24 156.30 146.92 133.56 126.66 122.43 114.78

1000 119.45 108.83 104.20 97.95 89.04 84.44 81.62 76.52

750 89.59 81.62 78.15 73.46 66.78 63.33 61.22 57.39

1500 264.23 240.74 230.50 216.67 196.97 186.78 180.56 169.27

1000 176.15 160.50 153.67 144.45 131.32 124.52 120.37 112.85

750 132.12 120.37 115.25 108.33 98.49 93.39 90.28 84.64

1500 372.82 339.68 325.23 305.71 277.92 263.55 254.76 238.84

1000 248.55 226.45 216.82 203.81 185.28 175.70 169.84 159.23

750 186.41 169.84 162.61 152.86 138.96 131.77 127.38 119.42

1500 503.13 458.40 438.90 412.56 375.06 355.66 343.80 322.32

1000 335.42 305.60 292.60 275.04 250.04 237.11 229.20 214.88

750 251.56 229.20 219.45 206.28 187.53 177.83 171.90 161.16

Bevel Units are not standard in this range. Can be offered on enquiry only.

2070

180 1437.5

110 345

140 633

160 978

4945

290 6210

225 2875

250 3680

270

4

premium_planetary gears.pdf

Documents