presentation final project dka 2011

7/31/2019 Presentation Final Project Dka 2011

1/26

MOHD ALIFF BIN MOHD ANUAR 01PKA10F2020

SANGEETHA A/P GANAYESAN 01PKA10F2022

SYUHAIDAH BINTI ZULHADI 01PKA10F2006

NUR FADHILAH BT. KAMARUZAMAN 01PKA10F2008

DIPLOMA -DIPLOMA -CIVIL ENGINEERINGCIVIL ENGINEERING

ADVISOR:MR. HJ ALI SABRI BIN KAMARUDDIN

MISS MAZLINA BINTI ALANG OTHMAN


2/26

TITLE

FINAL PROJECT 2011

****TEMPORARY

AUTOMATIC AWNING


3/26

INTRODUCTIONINTRODUCTION

An awning or overhang is a secondary covering attached to theexterior wall of a building. It is typically composed of canvaswoven of acrylic, cotton or polyester yarn, or vinyl laminated topolyester fabric that is stretched tightly over a light structure ofaluminium, iron or steel, possibly wood or transparent material.

The configuration of this structure is something of a truss, spaceframe or planar frame. Awnings are also often constructed ofaluminium understructure with aluminium sheeting. These

aluminium awnings are often used when a fabric awning.

The location of an awning on a building may be above a window,a door or above the area along a sidewalk and also houseentrance connected to the car porch.


4/26

PROBLEM STATEMENTPROBLEM STATEMENT

An awning or overhang is a secondary covering

attached to the exterior wall so it cannot be

removed when its not necessary or during sunnyday where light system or the sun light system

needed for example when drying clothes or during

having some occasions at home mostly like open

parties where sometimes this awning not needed.


5/26

OBJECTIVESOBJECTIVES

The following are the main objectives of the studyconducted:

To design a model with awning that can be moved usingremote and water sensor as alternative.

To observe and compare the innovation regarding thecosting, advantage , and suitability, also the functionbetween the ordinary awning and temporary automatic

awning.

To observe the innovation is working or functioning withthese sensor and remote system which is added asalternative.


6/26

SCOPE OF STUDYSCOPE OF STUDY

-To carry out the research regarding fixing the sensor and

the remote control functions and materials for the house

model

-To set up the model which show the function of the

automatic awning.

-To compare the function of automatic awning and thepermanently attached awning.

.


7/26

ContinueContinue SCOPE OF STUDYSCOPE OF STUDY

-To observe and survey the costing and advantage,

suitability and differences between the ordinary awning

and temporary automatic awning.

-To carry out the research of these sensor and remote

control and fix them to the model and observe.

-To observe workability of the automatic awning after themodel completed.


8/26

Beginning

Temporary Automaticawning

Design structureOr model

Internetresearch

Materialresearch

Electricalresearch


9/26

Intermediate

Ending

Design and createmodel

Observe

workability

Questionaire

Propose designand model


10/26


11/26

AWNING WHEN CLOSE


12/26

AWNING WHEN OPEN SENSOR (WATER DETECTOR)

ELECTRICAL BOX THAT HAVINFRARED FOR REMOTE

USE AND CIRCUIT


13/26

14

MOTOR AND GEAR IN

ELECTRICAL BOXAWNING

PALLET


14/26

8

THE METHOD GEAR AND AWNING

WILL BE PLACE AND FUNCTION


15/26

Sensor And RemoteSensor And Remote

ElectricalDetails


16/26

Costing for AutomaticCosting for Automatic

AwningAwning

ROUGH Costing for standard house measurement (20x15) in1 square feet .Material available in market and price fixing for 1 square feet . Thepricing is depends on the length and width of the awning to befixed.

20

15

*Diagram show a size of porch at common hauses in Malaysia


17/26

Continue costing of automatic awning

Material ofawning

Price for 1square feet

Total price

20 x15

Total price(20x15) feet(temporary

awning system)

Metal Deck

i) Roofing

ii) Crimp Curve

iii) Bond

RM 5.00

RM 5.50

RM 6.00

RM 1650

RM 1650

RM 1800

RM 1650 + (X)

RM 1650 + (X)

RM 1800 + (X)

Polyglass RM 32.00 RM 9600 RM 9600 +(X)

Fiber RM 27.00 RM8100 RM8100 + (X)

X = COST OF REMOTE AND SENSOR =RM 600.00 (ROUGHLY) + COST OF

GEAR SYSTEM AND ADDITIONAL EQUIPMENT ADDED


18/26

Analysis from the Questionaire

The questionnaire is done among 200 peoples on

include students publics, feedback obtained and

questionnaire are about:

Suitability of The Temporary automatic System for

current situation (houses)

Most preferred awning material for this Temporary

Awning System. The system bring advantage especially during raining.

About the costing which is more expensive than the

ordinary once.


19/26

ContinueAnalysis from the Questionnaire

PEOPLE


20/26

ContinueAnalysis from the Questionnaire

Rating/perspect 1 2 3 4 5 6

suitability 0 10 35 40 47 68

material 0 0 3 5 45 150

advantage 0 4 15 31 50 100costing 0 13 25 45 53 64

1 totally disagree 6 strongly agree

Conclusion : In this feedback theres no one responded to rate1 or strongly disagree. Analysis made from the feedbackobtained shows most of them agree with the suggestion oftemporary awning system from the aspect of the suitability,advantages and cost of the temporary awning system andpolycarbonate awning material is the most preferred for this

system.


21/26

Benefit Of AutomaticBenefit Of Automatic

AwningAwning

Awnings are affordable investment for your homeor business place. You can enjoy a lot of benefitswhen you use awnings. Awnings provide beauty,functionality, safety, comfort, energy savings andefficiency to your building

Awnings enhance the beauty and decoration of

your building Awnings can provide a stylish lookto your building. They are available in differentshapes, sizes, designs, colors, patterns, materialsand styles. Awnings can be used to enhance the

exterior charm of your building.


22/26

ContinueContinue Benefit Of AwningBenefit Of Awning

Awnings provide UV protection to your building Awnings protect your building interior from harmfulUV rays of the sun. Awnings can reduce the interiorheat in your home and business place. It prevents

your furniture, carpet, drapes, floor, etc from fadingdue to UV rays. It also prevents the health risksassociated with too much UV ray exposure

Awnings are durable investment for your building Awnings are made using UV resistant and weather-proof materials. They have an average life span ofabout 5-25 years. Hence they are highly durableinvestment for your building.


23/26

Continue..Continue.. Benefit Of AutomaticBenefit Of AutomaticAwningAwning

Awnings are easy for maintenance Awnings requireminimal washing and sweeping. Hence they can be

easily taken care and cleaned by the homeowner. Youcan easily remove mildew and stains from yourawning using mild soap and a soft brush. Awnings canalso be professionally cleaned.


24/26

Conclusion

The suggestion of temporary automatic awning has met the aim and

objectives setup earlier as the following conclusions can be drawn

based on the findings:

1) Awning can be accessible or moved with both remote systemand water sensor system as alternative.

2) Innovation is functioning with these sensor and remote system

which is added as alternative.

3) From the feedback the Cost, suitability, also advantage

compared between the ordinary awning and temporary automaticawning is analyzed and the temporary awning system gives higher

responds.

4) The system can be accessible for real house using the gear

system.


25/26

Contribution

This automatic awning can be apply at :

House

Windows, porch, backyardShops

Buildings( hotel,mosque)

Parks (provided with structure build)

Schools

Office


26/26

THANK YOU....

presentation final project dka 2011

Documents