presented by dr ahmed mohamed el-kamash hot lab. & waste management center aeae, egypt
DESCRIPTION
Evaluation of the Use of Synthetic Zeolite as a Backfill Material in Radioactive Waste Disposal Facility. Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt. AIM OF WORK. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/1.jpg)
Evaluation of the Use of Synthetic Zeolite as a Backfill Material in Radioactive Waste Disposal Facility
Presented by
Dr Ahmed Mohamed El-KamashHot Lab. & Waste Management CenterAEAE, Egypt
![Page 2: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/2.jpg)
Evaluate the feasibility of using synthetic zeolite NaA-X prepared from fly ash (FA) as backfill material in the proposed radioactive waste disposal facility in Egypt.
Also, the migration behavior of cesium and strontium ions, as two of the most important radionuclides commonly encountered in Egyptian waste streams through the proposed backfill material is studied using mathematical models
![Page 3: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/3.jpg)
Radioactive disposal system
• The principle objectives of radioactive waste management are to assure that workers and public are not harmed now or in future by the effects of radiation from the wastes and that the environment is not adversely affected.
• The fundamental safety concept for the disposal of radioactive wastes is to isolate the waste from the accessible environment for a period sufficiently long to allow substantial decay of the radionuclides and to limit release of residual radionuclides into the accessible environment.
![Page 4: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/4.jpg)
A disposal system is intended to:
• isolate the waste from the accessible environment for certain amount of time until waste activity reduced to acceptable hazardous level.
• control the radionuclides that reach the accessible environment
• limit the consequences of any unacceptable release to accessible environment
![Page 5: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/5.jpg)
Major Types of Radioactive Waste Disposal facilities:
– Near surface disposal facility means a land disposal facility in which radioactive waste is disposed of in or within the upper 30 meters of the earth’s surface.
– Deep Geological Disposal for high level waste such as spent nuclear fuel, >400 meters underground
![Page 6: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/6.jpg)
Repository design components
• The engineering barrier system
– Engineered barriers can be used as physical and /chemical obstruction to prevent or delay migration of radionuclides.
• The natural barrier system
– Consists of the geological media hosting the repository and any other geological formations contributing to waste isolation.
![Page 7: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/7.jpg)
Multiple barrier concept
• The long term safety of a repository relies on a series of barriers : The Engineered Barrier and The natural Barrier
• Multiple barrier concept is employed in which the waste form, the engineered barriers and the site itself all contribute to the isolation of the radionuclides.
• The failure of one or more of these barriers will be compensated by the rest of them
![Page 8: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/8.jpg)
Function of barriers
Barriers can either provide
• absolute containment for a period of time, such as the metal wall of a container, or
• may retard the release of radioactive materials to the environment, such as a backfill or host rock with high sorption capability.
![Page 9: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/9.jpg)
Elements of engineered barriers
![Page 10: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/10.jpg)
Backfill materials
• Backfills are used for a number of purposes: void filling to avoid excessive settlement, limitation of water infiltration, sorption of radionuclides, precipitation of radionuclides. Typical materials used, either singly or as admixtures, include clays, cement grout, rock, and soil.
• It is important to select the appropriate backfill. Selections of backfill materials for radioactive waste disposal have been derived from a much data on adsorption behaviour of radionuclides on several natural and synthetic materials.
• For long-term performance assessment of radioactive repositories, knowledge concerning the migration of radionuclides in the backfill materials is required .
• Sorption reactions are expected to retard the migration of radionuclides thereby reducing the potential radiological hazard to humans resulting from disposal of radioactive waste.
![Page 11: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/11.jpg)
Fly ash is an inorganic spherical residue obtained at coal power plants.
The spherical microscopic structure of fine fly ash is related to the equilibrium between the operating forces on the molten inorganic
The past applications of fly ash were restricted to its application in industry as an additive or as an adsorbent.
In respect to fly ash
![Page 12: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/12.jpg)
Synthesis of zeolites from fly ash
• Zeolite synthesis is one of a number of potential applications for obtaining high value industrial products from fly ash for environmental technology.
• The composition similarity of fly ash to
some volcanic materials, precursor of natural zeolites promoted the synthesis of zeolite from this waste material.
![Page 13: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/13.jpg)
Synthesis and characterization of pure zeolites
Sorption studies
Long term behavior of zeolite NaA-X blend as proposed backfill
![Page 14: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/14.jpg)
OxideSiO2 Al2O3 Na2O MgO P2O5 SO3 Cl K2O CaO TiO2 Fe2O3
Wt %43.81 23.18 0.87 0.80 0.49 15.68 4.01 2.72 6.10 2.31 0.01
Intermediate glass content of about 66.99%
Synthesis and characterization of pure zeolites
![Page 15: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/15.jpg)
:mullite (3Al2O3.2SiO2) and : α-quartz (SiO2)]
exits as crystalline substances, as identified by sharp peaks, while the presence of amorphous phases were identified by broad peaks (near 24 angle)
0.0 10 20 30 40 50 60 70
2θ angle
I
![Page 16: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/16.jpg)
- The available silica in fly ash was extracted by the alkali fusion method using sodium hydroxide.
- The amount of extracted silica was131.43g/kg fly ash.
- The amount of extracted alumina was about 41.72 g/kg.
– Synthesis of pure A-X ZEOLITE blend•
Silica-Aumina extraction by fusion
![Page 17: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/17.jpg)
The synthesis of NaA-X zeolite blend was carried out using the molar oxide ratios of:
SiO2/Al2O3 = 2.1Na2O/SiO2 = 1.4 H2O/Na2O = 39.0
Sodium aluminate solution was used externally to adjust the SiO2/Al2O3 ratio to the desired value
Synthesis of pure NaA-X zeolite
![Page 18: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/18.jpg)
Flow sheet diagram for the synthesis of NaA-X zeolite blend from fly ash using extraction method
![Page 19: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/19.jpg)
Element Na Al Si Ca Ti Mg Fe S K P other elements
Wt.%27.79 33.41 38.34 0.067 0.081 0.062 <0.01 0.002 0.056 0.004 <0.1
It clear that Si/Al ratio equals 1.15 which lied in the region of zeolite-A and X as reported in Breck ternary diagram
![Page 20: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/20.jpg)
2θ angle0.0 10 30 4020
The spectrum exhibits fingerprint lines of both zeolite X at 2θ = 6.10 and zeolite A at 2θ = 7.20 and 9.93.
I
:zeolite X and : zeolite A
![Page 21: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/21.jpg)
(a) (b)
(c) (d)
)a( Untreated FA Smooth and spherical particle interspersed in aggregates of crystalline compounds which may correspond to α-quartz and mullite.
)b( After 15 min fusion with Na OH )The amorphous aluminosilicates in fly ash were dissolved -Small surface cracks appeared - The particle surface changed, like unevenness
)c( After 30 min )The surface of FA became rough and burst - Larger cracks were appeared librating small aggregates
)d( After 60 min ) Small cenosphere were appeared -Several crystalline materials were precipitated onto the surface of FA particle
SEM
![Page 22: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/22.jpg)
SEM picture of the synthesized zeolite blend providing an evidence for
cubic crystal characteristic for Na-A zeolite and
the pyramidal octahedral crystal of Na-X zeolite
![Page 23: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/23.jpg)
Examination of Proposed backfill material: Synthetic zeolite Na A-X as backfill material in radioactive disposal facility
Efficiency of the material(Capacity )
Kinetics Studies Equilibrium Studies
Estimation of Sorption mechanism
(Pseudo first-second order)
Effect of temperature,Thermodynamic Parameters, ∆H, ∆G, ∆S
Thermodynamic Models ( Capacity )
Long term behavior of zeolite NaA-X as backfill material in disposal facility
Mechanical stability
Experimental Investigations
Column Studies
Distr. Coeff.,KdChemisorption
Diffusion, Di
Test
Dispersion coefficient, DL
![Page 24: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/24.jpg)
• Effect of pH• The effect of pH on the sorption of Cs+ ions from aqueous
chloride solutions using prepared zeolite NaA-X material was investigated over the pH range from 2.0 to 8.0.
• It was observed that the acidic medium has an inhibitory effect on the sorption process. This may be due to the competition behavior between hydrogen ions and studied ions for sorption onto the synthesized powder.
• The uptake was continuously increased from 18.6% to 62.6% with the increase in pH value and the maximum uptake was found to be 64.1% and it was observed at pH range from 6.0 to 8.0.
sorption studies
![Page 25: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/25.jpg)
Sorption kinetics
• Effect of time
0 20 40 60 80 100 1200
20
40
60
80
qt,m
g/g
Time,min
Cs+
Sr2+
A higher initial removal rate within the first 30 minutes followed by slower rate till reaching plateau.
The amount sorbed for both ions was increased with time and attained equilibrium within 90-120min The amount sorbed of : Sr2+ > Cs+
![Page 26: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/26.jpg)
Kinetic models
• Pseudo first order
0 10 20 30 40
0.4
0.6
0.8
1.0
1.2
1.4
1.6
(a)
Y2 =1.54671-0.02787 X
Y1 =1.5085-0.02336 X
log
(qe-
q t)
Time,min
Cs+
Sr2+
• Straight line obtained suggest the applicability of the pseudo first order model to fit the experimental data over the initial stage of the sorption process up to 40 min.
t.k
eqtqeq 30321log)log(
)Lagergren(
![Page 27: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/27.jpg)
0 20 40 60 80 100 1200.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
(b)
Y2 =0.12195+0.02078 X
Y1 =0.2174+0.02388 X
t/qt,m
in g
mg-1
Time,min
Cs+
Sr2+
• Pseudo second order
tqhq
t
et
11
It was shown that the sorption process of each ion follows pseudo second order model
)Ho and Mckay (
![Page 28: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/28.jpg)
Metal ions
First order Rate constant,k1(min-1)
Second order Rate constant,k2(min-1)
Cs+
Sr2+
0.0537
0.0640
0.0031
0.0039
Pseudo first and second-order rate constants for the sorption of cesium and strontium ions onto synthetic A-X zeolite blend at 298 K and 50 mg/l concentration.
![Page 29: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/29.jpg)
Estimation of diffusion coefficient
• In order to identify the step governing the removal rate of sorption process
0 10 20 30 400.0
0.5
1.0
1.5
2.0
2.5
2- Y =-0.00771+0.0587 X1- Y =-0.13186+0.05815 X
Bt
Time,min
Cs+
Sr2+
)2exp(1 2
12
61)( Btn
n ntF
2
2
or
iD
B
Metal ions Diffusion effective diffusion coefficient Di coefficient De
Cs+ Sr2+
6.99*10-12 4.194*10-12
6.26*10-12 3.72 *10-12
)Boyed et al(
![Page 30: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/30.jpg)
Sorption thermodynamics
• Sorption can be described using an empirical relationship that defines the distribution of radionuclides between solid and liquid
• Many isotherm models can describe sorption process such as Langmuir , Freundlch, and D-R.
• The parameters of the isotherm equations express the surface properties and affinity of the sorbent, at fixed temperature and pH.
![Page 31: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/31.jpg)
0 1000 2000 3000 4000 5000 6000 7000
200
400
600
800
1000
1200
1400
1600
Cs+
q e(m
mol
/kg)
Ce(mmol/m3)
298 K 313 K 333 K
0 2000 4000 6000 80000
500
1000
1500
2000
2500
3000
3500 Sr2+
q e(m
mol
/kg)
Ce(mmol/m3)
298 K 313 K 333 K
Sorption of Cs+ and Sr2+ ions on zeolite NaA-X at different temperatures )Langmuir(
![Page 32: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/32.jpg)
Sorption of Cs+ and Sr2+ ions on zeolite NaA-X at different temperatures )Freundlich(
0 1000 2000 3000 4000 5000 6000 70000
200
400
600
800
1000
1200
1400
1600
Cs+
q e(m
mol
/kg)
Ce(mmol/m3)
298 K 313 K 333 K
0 2000 4000 6000 8000
1000
1500
2000
2500
3000
3500
4000
Sr2+
q e(m
mol
/kg)
Ce(mmol/m3)
298 K 313 K 333 K
The metal concentration retained in the solid phase )mg/g( was calculated using the following equation :
M
Vccq e
e
)( 0
![Page 33: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/33.jpg)
Sorption of Cs+ and Sr2+ ions on zeolite NaA-X at different temperatures )D-R(
0 1000 2000 3000 4000 5000 6000 70000
200
400
600
800
1000
1200
1400
1600
Cs+
q e(m
mol
/kg)
Ce (mmol/m3)
298 K 313 K 333 K
0 2000 4000 6000 8000
1000
1500
2000
2500
3000
3500
4000
Sr2+
q e(m
mol
/kg)
Ce(mmol/m3)
298 K 313 K 333 K
![Page 34: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/34.jpg)
Isotherm models
• Langmuir Isotherm model
0 1000 2000 3000 4000 5000 6000 7000
0
1
2
3
4
5
Langmuir cs-zeolite
3- Y =0.41304+6.26764E-4 X2- Y =0.52506+6.42354E-4 X1- Y =0.68176+6.46796E-4 X
Ce/
q e(m
3 /kg)
Ce(mmol/m3)
298 K 313 K 333 K
-2000 0 2000 4000 6000 8000 10000-0.5
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Langmuir Sr-zeolite
Y3 =0.07485+2.83973E-4 XY2 =0.10257+2.86104E-4 XY1 =0.13334+2.889E-4 X
Ce/
q e,
kg/
m3
Ce, mmol/m3
298 K 313 K 333 K
eCe
qe
C oo QbQ )/1)/1 (()/(
![Page 35: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/35.jpg)
Langmuir model parameters
Table: Langmuir isotherm parameters for Cs+ and Sr2+ sorbed onto Zeolite NaA-X
Q0)mmol/kg( b)L/mmol( R2 RL Temperature
)K( Metal ion
1546.0 0.948 0.995 0.123 1556.7 1.223 0.995 0.098 1595.6 1.517 0.996 0.087 3461.4 2.166 0.997 0.042 3495.2 2.789 0.998 0.031 3521.5 3.793 0.997 0.024
298 313 333
298 313 333
Cs+
Sr2+
The value of saturation capacity Q0 corresponds to the monolayer capacity
Q0 and b increased with temperature showing that the sorption capacity and intensity of sorption are enhanced at higher temperatures.
![Page 36: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/36.jpg)
Isotherm models
• Freundlich isotherm model
2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0
2.7
2.8
2.9
3.0
3.1
3.2
Freundlich Cs-zeolite
3- Y =2.26438+0.23861 X
2- Y =2.0962+0.27791 X1- Y =1.91241+0.32219 X
log
q e(q e,
mm
ol/k
g)
log Ce(C
e,mmol/m3)
298 K 313 K 333 K
1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8
3.0
3.1
3.2
3.3
3.4
3.5
3.6
Sr-zeolite
Y3 =2.7094+0.22861 XY2 =2.54197+0.27235 X
Y1 =2.41705+0.30261 X
log
q e(q e,
mm
ol/k
g)
log Ce(C
e,mmol/m3)
298 K 313 K 333 K
efe CnKq log)/1(loglog
![Page 37: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/37.jpg)
Freundlich model parameters
Table: Freundlich isotherm parameters for Cs+ and Sr2+ sorbed onto Zeolite NaA-X
1/n Kf )mmol/kg( R2
Temperature )K( Metal ion
0.3222 81.730 0.985 0.2779 124.79 0.985 0.2386 183.81 0.982
0.2681 342.45 0.964 0.2428 416.19 0.965 0.2082 573.90 0.974
298 313 333
298 313 333
Cs+
Sr2+
1/n :value is dependent on the nature and strength of sorption process.
Kf represent sorption capacity of both ions on zeolite NaA-X.
![Page 38: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/38.jpg)
Isotherm models
• D-R isotherm model
0 200 400 600 800 1000-8.0
-7.8
-7.6
-7.4
-7.2
-7.0
-6.8
-6.6
-6.4
D-R isotherm plots for sorption of Cs+ions onto Zeolite NaA-X at different temperatures
3- Y =-5.97132-0.00275 X
2- Y =-6.08442-0.00293 X
1- Y =-6.01334-0.00389 X
ln q
e(q e,
(mo
l/g))
2(,kJ/mol)
298 K 313 K 333 K
200 300 400 500 600 700 800 900-7.0
-6.8
-6.6
-6.4
-6.2
-6.0
-5.8
-5.6
Sr2+
Y3 =-5.27976-0.00187 X
Y2 =-5.19247-0.00265 XY1 =-5.14828-0.00334 X
ln q
e(q e,
mo
l/g)
2(kJ2/mol2)
298 K 313 K 333 K
2lnln m
qqe
![Page 39: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/39.jpg)
D-R model parameters
Table )6( D-R isotherm parameters for Cs+ and Sr2+ sorbed onto Zeolite NaA-X
qm)mmol/kg( R2 E)kJ/mol(
Temperature )K(
Metal ion
-0.00389 2445.9 0.966 11.337 -0.00293 2278.0 0.963 13.063 -0.00275 2550.9 0.958 13.480
-0.0032 5508 0.986 12.50 -0.0025 5318 0.988 14.00 -0.0018 4934 0.988 16.62
298 313 333
298 313 333
Cs+
Sr2+
qm The maximum sorption capacity , the values of the mean free energy ,E, of sorption in all cases is in the range of 8-16 k J/mol, which are within the energy ranges of ion exchange reaction
![Page 40: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/40.jpg)
Effect of Temperature
In order to gain insight into the thermodynamic nature of the sorption process, several
thermodynamic parameters for the present systems were
calculated.
co KRTG ln
0.0030 0.0031 0.0032 0.0033 0.0034
0.5
1.0
1.5
2.0
2.5
Y =7.51968-1640.95029 X
Y =5.17944-1426.91259 X
ln K
c
1/T K-1
Cs+
Sr2+
RT
H
R
S Kln c
![Page 41: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/41.jpg)
Thermodynamic Parameters
Table )7(: Values of thermodynamic parameters for sorption of Cs+ and Sr2+ions
onto Zeolite NaA-X
Metal
ion
Temperature
K
Kc ΔGo
)kJ/mol(
ΔHo
)kJ/mol(
ΔSo
)J/mol(.K
Cs+
Sr2+
298
313
333
298
313
333
1.466
1.904
2.420
7.49
9.74
13.36
-0.947
-1.670
-2.446
-4.988
-5.921
-7.176
11.86
13.64
43.058
62.35
-The -ve values of ΔGo confirm the spontaneous nature of the sorption processes with preference towards Sr2+ than Cs+ ions.- The +ve values of ΔHo for both studied ions confirms the endothermic nature of the sorption processes.- The entropy change was +ve and was greater in Sr2+>Cs+
![Page 42: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/42.jpg)
Column investigations
• Fixed bed column sorption experiments were carried out to study the sorption dynamics. The fixed bed column operation allows more efficient utilization of the sorptive capacity than batch process.
• The breakthrough curves measured are useful to determine the main transport parameters under dynamic conditions.
![Page 43: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/43.jpg)
0 200 400 600 800 1000 12000.0
0.2
0.4
0.6
0.8
1.0
1.2
Sr2+ Flow rate=3 mL/minBed depth=3 cm
150 mg/L 100 mg/L 50 mg/L
Bre
akth
rou
gh
, Ct/C
o
Effluent Volume, mL
0 200 400 600 800 1000 12000.0
0.2
0.4
0.6
0.8
1.0
1.2
Cs+ Flow rate=3 mL/minBed depth=3 cm
150 mg/L 100 mg/L 50 mg/L
Bre
akth
rou
gh
, Ct/C
o
Effluent Volume, mL
Breakthrough curves for Cs+ and Sr2+ ions sorbed onto zeolite NaA-X
![Page 44: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/44.jpg)
Fixed Bed Data
Table) 8(: fixed bed data of Cs+ and Sr2+ions onto Zeolite NaA-X at
different metal ions feed concentrations
metal ions
C0)mg/L(
X)mg(
qtot)mg( Column performance%
Bed capacity)mg/g(
Cs+
50 100 150
39.0 47 58.5
23.35 28.5 30.5
59 55 52
23.35 28.5 30.5
Sr2+
50 100 150
57.5 75 78.75
37.5 48.75 45
65 60 57
37.5 48.75 53.5
![Page 45: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/45.jpg)
Estimation of dispersion coefficient
21
0 )/(2
1
2
1
LvUD
Uerfc
c
c
fL
dx
dCv
dx
CdD
dt
dCfL
2
2
tD
tvLerf
D
Lv
tD
tvLerf
C
C
L
f
L
f
L
f
2exp
22
1
0
The dispersion coefficient may then be calculated from the breakthrough curve using the following equation
![Page 46: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/46.jpg)
Transport mechanisms and governing equations
• Diffusion (Fick`s law)
• Advection-Dispersion
• Radioactive decay • Sorption qe = Kd Ce
dx
dCDF
z
CnDnvCf
Ct
C
Long term behavior of the proposed backfill material )Zeolite NaA-X( in
disposal facility.
![Page 47: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/47.jpg)
Modeling migration of radionuclides in the waste disposal facility
System description
Development of conceptual model
Selection of numerical technique
Carry out simulation
Selection of mathematical models
Performance assessment steps
![Page 48: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/48.jpg)
Conceptual model
Host rock
Groundwater table
Cover
Waste packages
Concrete vault
Backfill
Simplified diagram
![Page 49: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/49.jpg)
Modeling migration through waste form
Where: decay constant, s-1 x : spatial coordinate in x direction x: spatial coordinate in y directiont: time, sC: contaminant concentration in the waste, Bq/mlD: diffusivity of contaminant in the waste.Rd: retardation coefficient in the waste
where A: area of the interface
Cy
C
x
C
Rd
D
t
C
2
2
2
2
dAx
CDRate w
A
![Page 50: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/50.jpg)
Numerical solution and computer simulation
Cy
C
x
C
Rd
D
t
C
2
2
2
2
nji
Cy
nji
Cy
nji
Cy
x
nji
Cx
nji
Cx
Rd
D
t
nji
Cnji
C
,2)(2
,21
,2
2)(2
,21
,2
,1
,
yx 2Rd
tDR
C = u
nj,i
2y
1nj,i
2y
nj,i
2x
1nj,i
2x
nj,i
1nj,i uuuuR
2
1uu
nj,1i
nj,i
nj,1i
nj,i
2x uu2uu
n1j,i
nj,i
n1j,i
nj,i
2y uu2uu
![Page 51: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/51.jpg)
Alternating Direction Implicit method (ADI)
First step
n1j,i
nj,i
n1j,i
nj,i
2/1nj,1i
2/1nj,1i
2/1nj,i vv2vv
R
1uuu2
R
2/1n1j,i
2/1nj,i
2/1nj,i
1nj,1i
1nj,1i
1nj,i vv2v
R
1uuu2
R
Second step
![Page 52: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/52.jpg)
Equations in Matrix form
2100
0021
0012
R
R
R
nu
u
u
u
u
4
3
2
1
1
21
)2()(
)2()1(
nn vvR
nBCND
vvR
BCND
=
2100
0021
0012
R
R
R
nv
v
v
v
v
4
3
2
1
=
1
21
)2()(
)2()1(
nn uuR
nBCND
uuR
BCND
![Page 53: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/53.jpg)
Computer program flow chart for waste model
Start
Input Data
Calculate R
Setup the coeffs. Matrices
Perform L.U. decomposition on v and u Coeffs.
Get values in the B.C .
Vector for u
Get values in the B. C .
Vector for v
A
Time = 0.0
Get values in the u vector top & bottom
Get values in the u vector other rows
M<3
M>3
Time>Tmax No
Yes
C
Get values for the second row
Back substitution for the u vector
Get values in v vector top &bottom
M<3
M>3
Get values in the second row
Get values in the v vector for other rows
C
Time=time *t
Output the concentration profile
Calculate the concentration profile
Calculate the rate
Output the rate
End
No
Yes
Yes
No
No
Stop
Back substitution for the v vector
BA
B
Yes
No
Yes
![Page 54: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/54.jpg)
Modeling migration through backfill
nji
nji
nji
yynji
nji
nji
xxji
nnji CCC
DCCC
D
t
CC1,,1,2
2/1,1
2/1,
2/1,12
,2/1
, 222
2/1nj,i
n1j,i
n1j,iy
2/1nj,1i
2/1nj,1ix CCCvCCv
x
vxx
DB
2
2
22 xxD
tA
yv
yyD
C2
2
22
yyD
tD
yv
yyD
E2
y
vyy
DF
2
Cy
Cv
x
Cv
y
CD
x
CD
t
Cyx2
2
yy2
2
xx
![Page 55: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/55.jpg)
Equations in Matrix form
AC
B
BAC
BAC
BA
00000
000
00
000
nu
u
u
u
u
4
3
2
1
=
11
243
132
021
nnn FvEvvD
FvEvvD
FvEvvD
FvEvvD
AC
B
BAC
BAC
BA
00000
000
00
000
nv
v
v
v
v
4
3
2
1
=
11
243
132
021
nnn FuEuuD
FuEuuD
FuEuuD
FuEuuD
![Page 56: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/56.jpg)
Computer program flow chart for backfill model
Initialization For the B.C. and initial condition
Set up the coefficient matrices for both waste and backfill by overwriting on the diagonal and certain off diagnonal elements
Get values into B.C. vector for u matrix in the waste and backfill
Get values into B.C. vector for v matrix in the waste and backfill
Perform L.U. decomposition on the diagonal terms for the waste and backfill
A
A
Forward substitution for the waste equations
Backward substitution for the waste equations
Differentiate to find gradient
Integrate and multiply by Dw*Z w to find the release rate from the waste
Forward substitution for the backfill equations
Backward substitution for the backfill to find the concentration profile due to instantaneous unit release
B
Perform convolution integral
Differentiate to find concentration gradient
Integrate and multiply by Db*Zb to find the release rate from the backfill
If Time> Tmax
Output
END
B
![Page 57: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/57.jpg)
Model validation
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
0.1 0.15 0.2 0.25 0.3 0.35 0.4
Distance, m
C/C
o,
Numeriacl
Analytical
tRD
VtxRerfc
D
Vx
tRD
VtxRerfc
CtxC
LLL 2
.exp
2
.
2),( 0
(Ogata, 1970)
![Page 58: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/58.jpg)
Results of the long term studies
0.05 0.1
0.15 0.2
0.25 0.3
0.35
0.05
0.2
0.4
0
100
200
300
400
500
600
C
X(Cs)
Y
C,Bq/m3
,m
,m
Concentration profile of Cs in zeolite backfill after 300 y
![Page 59: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/59.jpg)
0.05 0.1 0.15 0.2 0.25 0.30.05
0.15
0.3
0.4
0
10
20
30
40
50
60
70
80
C
X(Sr)
Y
C,Bq/m3
,m
,m
Concentration profile of Sr in zeolite backfill after 300 y
![Page 60: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/60.jpg)
Release rate of Cs and Sr radionuclide from the proposed zeolite backfill
1.E-06
1.E-05
1.E-04
1.E-03
1.E-02
1.E-01
1.E+00
1.E+01
0 50 100 150 200 250 300
Time )y(
Rel
ease
Rate
)G
Bq
/Y(
Sr
Cs
![Page 61: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/61.jpg)
1.E-06
1.E-05
1.E-04
1.E-03
1.E-02
1.E-01
1.E+00
1.E+01
1.E+02
0 50 100 150 200 250 300
Time )y(
Rele
ase
Ra
te
) GB
q
/ Y (Waste Form
Zeolite
Bentonite&crushed rock
Release rate for the Cs radionuclides from the waste form ,the proposed and commonly applied backfill
![Page 62: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/62.jpg)
ConclusionsThe results obtained in this work show the following:
• The synthetic zeolite NaA-X proposed as backfill material was successfully prepared and completely characterized using XRD, XRF, and SEM techniques.
• The sorption studies indicated the feasibility of using the prepared zeolite NaA-X as backfill material compared to bentonite because of its high capacity and selectivity for the concerned radionuclides )Cs and Sr( these characteristics are fundamental to the performance of such zeolite in radioactive waste interactions.
![Page 63: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/63.jpg)
conclusions• Column investigation yield a realistic picture of the sorptrion of
Cs and Sr on zeolite NaA-X and lead to determination of dispersion coefficient which in turn used in migration modeling.
• Transport properties of zeolite NaA-X packed column have been determined. The classical advection-dispersion model described successfully Cs and Sr breakthrough curves under saturated flow conditions. Based on this experimental data the dispersion coefficient needed for long-term migration study was determined.
• The mathematical simulation performed in the long-term studies show the capability of the prepared zeolite NaA-X to prevent the migration of Cs and Sr from the repository to the environment.
![Page 64: Presented by Dr Ahmed Mohamed El-Kamash Hot Lab. & Waste Management Center AEAE, Egypt](https://reader035.vdocument.in/reader035/viewer/2022062807/568150ad550346895dbec355/html5/thumbnails/64.jpg)