preset slide dimmer controls (ds10-wh) - lsi...

1
FEATURES Provide single pole (one location) or 3-way (two location) lighting control when used with a 3-way switch Attractive styling coordinates perfectly with complete line of wiring devices Built-in radio/TV interference filter Fit easily into a standard wallbox and are suitable for multi-gang installations Dimmer control comes packaged with six product options in each box for superior versatility; 3 changeable color faces and single pole or 3-way control • Limited five-year warranty Preset Slide Controls Fluid slide movement allows fine adjustment of light level with minimal effort Captive wraparound slide bar remains securely attached Compatible with dimmable LED and CFL lamps Easy to use push button switch with green LED locator Push button switch acts as an air gap switch completely disconnecting power from unit for bulb changing Slide controls travel approximately 20mm Power failure recovery ensures retention of last setting before power interruption 0-10V LED/Fluorescent Dimmer Designed for use with LED fixtures using 0-10V power supplies Dual voltage 120V/277V; 1200VA/1500VA 28 mA maximum sink current No power pack required for switching Operating 0˚C – 55˚C Non-operating 10˚C – 85˚C Relative humidity, non-condensing 20% to 90% BASIC OPERATION - Designed for both single pole (one location) and 3-way (two location) applications. Controls feature a smooth, captured slide bar for fine adjustment of lighting levels and an easy to use push button that provides preset ON/OFF switching. Color change kits simplify inventory by diminishing the need for stocking separate devices in every color. PRESET SLIDE DIMMER CONTROLS (DS10-WH) DIMENSIONS 2-1/8” (54mm) 1-7/16” (36mm) 3/8” (10mm) 2-11/16” (68mm) 3-1/4” (83mm) 4-1/8”(105mm) ORDERING INFORMATION PART NO. CAT. NO. DESCRIPTION 596066 DS10-WH 0-10V dimmer (shipped white, includes ivory and light almond kit) OPTIONS PART NO. / DESCRIPTION CAT. NO. COLOR* 596067G / Color Change Kit 596067E / Color Change Kit 596067R / Color Change Kit 596067B / Color Change Kit DSCK G DSCK E DSCK R DSCK B Gray Black Red Brown Frame Strap Snaps Push in 2 Locations ON/OFF LED Slider Single Location Control Hot (Black) Neutral (White) Dimmer Black Green Ground Black White Red Red Insulating Label Red Blue Yellow To Lamps Primary Side Gray Violet Line 120/277 VAC, 60 Hz 0-10 VDC Ballast Hot (Black) Neutral (White) Dimmer 3-Way Switch Red Black Green Ground Green Ground Red Gray Violet Line 120/277VAC, 60Hz Common Terminal (Black Screw) Black White 0-10 VDC Ballast Red Blue Yellow To Lamps Primary Side Two Location Control 08/10/17 © 2016 LSI INDUSTRIES INC. Project Name Catalog # 1-800-436-7800 (Support, Option 8) www.lsi-airlink.com

Upload: buitu

Post on 04-Apr-2018

217 views

Category:

Documents


3 download

TRANSCRIPT

Page 1: PRESET SLIDE DIMMER CONTROLS (DS10-WH) - lsi …lsi-airlink.com/wp-content/uploads/2016/09/DS10-WH.pdf · FEATURES • Provide single pole (one location) or 3-way (two location) lighting

FEATURES

• Provide single pole (one location) or 3-way (two location) lighting control when used with a3-way switch

• Attractive styling coordinates perfectly with complete line of wiring devices

• Built-in radio/TV interference filter

• Fit easily into a standard wallbox and are suitable for multi-gang installations

• Dimmer control comes packaged with six product options in each box for superior versatility;3 changeable color faces and single pole or 3-way control

• Limited five-year warranty

Preset Slide Controls

• Fluid slide movement allows fine adjustment of light level with minimal effort

• Captive wraparound slide bar remains securely attached

• Compatible with dimmable LED and CFL lamps

• Easy to use push button switch with green LED locator

• Push button switch acts as an air gap switch completely disconnecting power from unit forbulb changing

• Slide controls travel approximately 20mm

• Power failure recovery ensures retention of last setting before power interruption

0-10V LED/Fluorescent Dimmer

• Designed for use with LED fixtures using 0-10V power supplies

• Dual voltage 120V/277V; 1200VA/1500VA

• 28 mA maximum sink current

• No power pack required for switching

• Operating 0˚C – 55˚C

• Non-operating 10˚C – 85˚C

• Relative humidity, non-condensing 20% to 90%

BASIC OPERATION - Designed for both single pole (one location) and 3-way (two location) applications. Controls feature a smooth, captured slide bar for fine adjustment of lighting levels and an easy to use push button that provides preset ON/OFF switching. Color change kits simplify inventory by diminishing the need for stocking separate devices in every color.

PRESET SLIDE DIMMER CONTROLS (DS10-WH)

DIMENSIONS

2-1/8” (54mm)

1-7/16”(36mm)

3/8” (10mm)

2-11

/16”

(68m

m)

3-1/

4” (8

3mm

)

4-1/

8”(1

05m

m)

ORDERING INFORMATION

PART NO. CAT. NO. DESCRIPTION

596066 DS10-WH 0-10V dimmer (shipped white, includes ivory and light almond kit)

OPTIONS

PART NO. / DESCRIPTION CAT. NO. COLOR*

596067G / Color Change Kit596067E / Color Change Kit596067R / Color Change Kit596067B / Color Change Kit

DSCK GDSCK EDSCK RDSCK B

GrayBlackRed

Brown

Frame

Strap

SnapsPush in 2 Locations

ON/OFF LED

Slider

Single Location Control

Hot (Black)

Neutral (White)

Dimmer

Black

Green Ground

Black

White

RedRed

InsulatingLabel

RedBlueYellow

To LampsPrimarySide

GrayViolet

Line 120/277 VAC,

60 Hz

0-10 VDCBallast

Hot (Black)

Neutral (White)

Dimmer 3-Way Switch

Red

Black

GreenGround

GreenGround

RedGrayViolet

Line 120/277VAC,

60Hz

CommonTerminal

(Black Screw)

Black

White0-10 VDCBallast

RedBlueYellow

To LampsPrimary

Side

Two Location Control

08/10/17

© 2016 LSI INDUSTRIES INC.

Project Name Catalog #

1-800-436-7800 (Support, Option 8) www.lsi-airlink.com