Pretreat Solutions Process

Turn bucket over and remove lid. Install Mop to Mop Frame or Pad to Pad Frame.

Install Mop or Pad

Clean floors using the Mop Clean; clean other flat cleanable surfaces (such as mirrors, partitions, windows, etc.) using the Pad.

Floors and Walls

Flip buckets over and allow to sit for 15 minutes.

Turn Buckets

Load Bucket with microfiber Mops or Pads. Load Mops and Pads with the microfiber side down. The top Mop or Pad should be loaded with microfiber side up to prevent splashing.

Load Buckets

Pour solution slowly and evenly over the Mops or Pads.

Seal Bucket with lids; ensure that all corners are tight and properly sealed.

Add Solution / Seal Buckets

Measure the recommended amount of solution (please refer to the chart below right for recommended dilution).

Solution

CLOTHS 12” x 12” CLOTHS 16” x 16” 10” LOOP PADS 10” WHITE PADS 3.5 GALLON BUCKET

15 10 .10 gallons / .38 liters

20 10 10 15 .20 gallons / .75 liters

30 15 15 20 .30 gallons / 1.2 liters

40 20 20 30 .40 gallons / 1.5 liters

50 25 25 35 .60 gallons / 2.25 liters

60 30 30 40 .75 gallons / 2.8 liters

70 35 35 45 .85 gallons / 3.2 liters

LOOP MOPS 6 GALLON BUCKET

6 .37 gallons / 1.4 liters

9 .50 gallons / 1.9 liters

12 .75 gallons / 2.8 liters

18 1.0 gallons / 3.8 liters

21 1.25 gallons / 4.7 liters

24 1.50 gallons / 5.6 liters