prevention of amputations at work - wsh c · 2018-02-06 · pilz in facts and figures founded 1948,...
TRANSCRIPT
Agenda
Company Introduction
Pilz Safety Components
Pilz Consulting and Engineering Services
Safe Components and Technologies
24.01.2018 Prevention Amputations at Work
Pilz in facts and figures
Founded 1948, independent automation technology company
100 % family-run, medium-sized company
Headquarters in Ostfildern near Stuttgart (Germany)
Employees: More than 2,200
worldwide
24.01.2018 Prevention Amputations at Work
The complete solution for your machine
24.01.2018 Prevention Amputations at Work
Complete solutions for safe automation
24.01.2018 Prevention Amputations at Work
Excellent Components
Product portfolio
Sensor technology Motion ControlControl and
Communication
Operating and monitoring Software
24.01.2018 Prevention Amputations at Work
Safety Services include the whole machine
lifecycle
24.01.2018 Prevention Amputations at Work
Pilz Safety Services Portfolio
Machinery Safety Services Portfolio (continued)
24.01.2018 Prevention Amputations at Work
Plant AssessmentProvides your organisation with an outline analysis of the safety status of all machinery and equipment
International Compliance ManagementManagement of conformance with the ISO, IEC, ANSI and/or other standards
ESPE Machine Safeguard Inspection Operational safety of ESPE used to protect against mechanical hazards on production plants
Safety TrainingComprehensive range of training in relation to compliance and safety
LOTO SystemIdentifies weaknesses in a company’s LOTO system and develops procedures and policy where required
Typical Layout Factory Line
24.01.2018 Prevention Amputations at Work
Safe Guarding Components and Technologies
24.01.2018 Prevention Amputations at Work
Example of safety components available in the market:
Interlocking Device
Two-Hand Control
Light Curtains
Safety Mats
Safety Scanner
Safety Camera
24.01.2018 Prevention Amputations at Work
Safe Guarding Components and Technologies
Interlocking
When to use an interlocking device?
When you required access to the process or line to do product
inspection, maintenance or troubleshooting.
24.01.2018 Prevention Amputations at Work
Safe Guarding Components and Technologies
Two Hand Controls
When to use a two-hand control device?
Two-Hand Controls are only valued to one operator
Only be used where access to the hazardous part of machine are under
direct supervision of the operator
24.01.2018 Prevention Amputations at Work
Safe Guarding Components and Technologies
Light Curtains
When to use a light curtains?
Frequent access is required to danger area.
Suitable when there is no risk of material being ejected from machine.
3 different type of protection:
Finger, Hand and Body protection
24.01.2018 Prevention Amputations at Work
Safe Guarding Components and Technologies
Safety Mats
When to use safety mats?
Provides an area protection around machine hazards
Function is to stop the machine when pressure in applied
Area of Applications:
Poor visibility conditions (e.g. lots of dust or smoke)
24.01.2018 Prevention Amputations at Work
Safe Guarding Components and Technologies
Laser Scanner
When to use laser scanner?
It provides an area protection similar to safety mats.
It will stop the machine when operator infringe the protective area.
Below is the example of the application of laser scanner:
24.01.2018 Prevention Amputations at Work
Safe Guarding Components and Technologies
Safe Camera
In contrast to simple sensors, safe camera technology is able to to
record and analyse detailed information about the whole monitored
zone.
Application example is an 3 dimension area monitoring.
Safe Guarding Components and Technologies
Safe Camera-Continue
24.01.2018 Prevention Amputations at Work
Safe Guarding Components and Technologies
Safe Camera - Continue
Another application example using camera based technology in the press
brake machine.
24.01.2018 Prevention Amputations at Work
Complementary Protective Device
emergency stop
As per machinery directive, Emergency stop devices must be a back-up
to other safeguarding measures and not a substitute for them
Emergency Stop Color
– Actuator Color – Red
– Background Color – Yellow
Must be Clear and Visible to Operators
24.01.2018 Prevention Amputations at Work
The safe solution for your application:
Sensor and control technology
24.01.2018 Prevention Amputations at Work
Pilz Training Portfolio
CMSE ® – Certified Machinery Safety Expert
CMSE® certification deals with complex technical issues
around the whole machinery lifecycle
Information on current standards and legal practice
Details on the risk assessment procedure
Functional safety
Implementation of compliance strategies
Multinational companies can implement CMSE® as
the standard qualification within the organization
Date: 27 Feb – 2 March 2018
Internationally standardised with consideration of
regional requirements
Certified by TÜV NORD
Graduates receive an internationally recognised TÜV
Nord certificate
Prevention Amputations at Work24.01.2018
Thank you
CM
SE
®,
Ind
ura
NE
Tp
®,
PA
S4
00
0®,
PA
Sca
l®,
PA
Sco
nfig
®,
Pilz
®, P
IT®,
PL
ID®,
PM
Cpri
mo
®,
PM
Cp
rote
go
®,
PM
Cte
nd
o®,
PM
D®,
PM
I®,
PN
OZ
®, P
rim
o®,
PS
EN
®,
PS
S®,
PV
IS®,
Safe
tyB
US
p®, S
afe
tyE
YE
®,
Safe
tyN
ET
p®, T
HE
SP
IRIT
OF
SA
FE
TY
®
are
reg
iste
red
an
dp
rote
cte
dtr
ad
em
ark
so
fP
ilz G
mb
H &
Co
. K
G in
so
me
co
un
trie
s. W
ew
ou
ldp
oin
to
ut th
atp
rod
uct
fea
ture
sm
ay
va
ryfr
om
the
de
tails
sta
ted
in th
isd
ocu
me
nt,
de
pe
nd
ing
on
th
esta
tus
at
the
tim
e o
fp
ub
lica
tio
na
nd
the
sco
pe
ofth
ee
qu
ipm
en
t. W
ea
cce
pt
no
resp
on
sib
ility
for
the
va
lid
ity, a
ccu
racy
an
de
ntire
tyo
fth
ete
xta
nd
gra
ph
ics
pre
se
nte
din
th
isin
form
atio
n. P
lea
se
co
nta
cto
ur
Te
ch
nic
al S
up
po
rt ifyo
uh
ave
an
yq
ue
stio
ns.
Keep up-to-date on Pilz
www.pilz.com
Pilz GmbH & Co. KG
Felix-Wankel-Straße 2
73760 Ostfildern, Germany
Tel.: +49 711 3409-xxx
Fax: +49 711 3409-xxx
First name, surname