price guide 2015 - schneider electric · pdf filep143 - micom feeder management ied with...

SEPAM, MiCOM & VAMP RangesAutomtion business unit

Price guide 2015

SEPAM, MiCOM and VAMP Price Guide 2015

Page

Sepam Series

S10N - Overcurrent Protection IED - 1 phase 7

S10B - Overcurrent Protection IED - 2/3 phase + EF 7

S10A - Overcurrent Protection IED - 3 phase + EF 7

Sepam series 20-40 Basic UMI 8

Sepam series 20-40 Integrated advanced UMI 9

Sepam series 60 10

Sepam series 80 with remote UMI 11

Sepam series 80 with advanced UMI 11

Sepam series 80 MIMIC based UMI 12

Sepam accessories for 10, 20, 40, 60 ,80 13

Sepam spare part 14

MiCOM Px10 series

P111 Enhancement - Overcurrent Protection IED 17

P114D - MiCOM Self-Powered Overcurrent IED 17

P115 - MiCOM Self-Powered Overcurrent Protection IED 17

P116 Model A - MiCOM Self/Dual Overcurrent Protection IED 17

P116 Model L - MiCOM Self/Dual Overcurrent Protection IED 17

P211 - MiCOM Motor IED 17

MiCOM Px20 series

P120 - MiCOM Overcurrent Protection IED - 1 phase 18

P121 - MiCOM Overcurrent Protection IED - 3 Phase 18

P122 - MiCOM Overcurrent Protection IED - 3 Phase & EF 18

P123 - MiCOM Overcurrent Protection IED - 3 Phase & EF 18

P123R - MiCOM Overcurrent Protection IED - 3 Phase & EF, Retrofit solution 18

P125 - MiCOM Directional Overcurrent Protection IED - DEF 18

P126 - MiCOM Directional Overcurrent Protection IED - 3 phase OC & DEF 18

P127 - MiCOM Directional Overcurrent Protection IED - 3 Phase DOC & DEF 18

P220 - MiCOM Motor Protection IED 19

P225 - MiCOM Motor Protection IED 19

P521 - MiCOM Differential Feeder Protection IED 19

P521 - Options and Accessories 19

P591 - MiCOM G703 Interface Module 20

P593 - MiCOM X21 Interface Module 20

P594 - MiCOM GPS Synchronising Module 20

P-2M-L - G703 Optic/Electric Interface unit 20

P721 - MiCOM High Impedance Differential IED - 1 phase 20

P723 - MiCOM High Impedance Differential IED - 3 phase 20

P791 - Accessory for High Impedance Differential application 20

P793 - Accessory for High Impedance Differential application 20

Sepam series Accessories

Contents

Sepam series 10

Sepam series 20-40

Sepam series 60

Sepam series 80

Sepam series spare part

Non-Directional Overcurrent

Self/Dual Powered Overcurrent

Motor Portection

Overcurrent Protection

Motor Protection

Line Differention

High Impedance Differential Protection

Schneider Electric SA - NRJED113434EN of 65


P821 - MiCOM Stand-alone Breaker Failure IED 21

P921 - MiCOM Voltage Protection IED 21

P922 - MiCOM Voltage & Frequency Protection IED 21

P923 - MiCOM Voltage & Frequency Protection IED 21

E2 - RS232/USB cable 21

STRIKER - Striker for Self-powered relays (GPA-50.1 / V668) 21

E124 - MiCOM Capacitor Trip Unit 21

MiCOM Px30 series

P130C - MiCOM Compact Non-directional Overcurrent IED 22

P130C - MiCOM Compact Directional Overcurrent IED 22

P132 - MiCOM Feeder Management 22

P139 - MiCOM Feeder Management 23

P430C - MiCOM Compact Distance IED 23

P433 - MiCOM Distance IED 24




P530C - MiCOM Compact Line Differential IED 26

P532 - MiCOM Line Differential IED 26

P630C - MiCOM Compact Transformer Management 27

P631 - MiCOM Transformer Management 27




P130C - Voltage only option 29

P132 - Voltage only option 29

P138 - Railway Overcurrent IED 31

P436 - Railway Distance IED 31

P438 - Railway Distance IED 32

P638 - Railway Transformer IED 32

MiCOM Px40 series

P141 - MiCOM Feeder Management IED 33

P142 - MiCOM Feeder Management IED with Auto-reclose 33

P143 - MiCOM Feeder Management IED with Auto-reclose & Check Synch 34

P145 - MiCOM Feeder Management IED with Auto-reclose & Check Synch 34

P241 - MiCOM Universal Motor Protection IED 35



P341 - MiCOM Interconnection / Loss of Mains Protection IED 36

P342 - MiCOM Generator Protection IED 37




Accessories & Cables

Breaker Failure Protection

Voltage & Frequency Protection

Integrated Generator Management

Non-Directional Overcurrent Protection

Directional Overcurrent Protection

Integrated Feeder Management

Line/Cable Distance Protection

Line Differential Protection

Integrated Transformer Management

Voltage & FREQUENCY Protection

Railway Protection

Integrated Feeder Management

Integrated Motor Management



P441 - MiCOM Distance Protection (3 Phase) IED 40

P442 - MiCOM Distance Protection (1/3 Phase) IED 41





P541 - MiCOM Line Differential Protection (with Overcurrent Backup) IED 43

P542 - MiCOM Line Differential Protection (with Overcurrent Backup) IED 43

P543 - MiCOM Line Differential Protection (with Distance Backup) IED 44




P591 - MiCOM G703 Interface Module 46

P593 - MiCOM X21 Interface Module 46

P594 - MiCOM GPS Synchronising Module 46

P-2M-L - G703 Optic/Electric Interface Unit 46

P547- MiCOM Phase Comparison Protection IED 46

P642 - MiCOM Transformer Protection IED - 2 windings 47

P643 - MiCOM Transformer Protection IED - 2 or 3 windings 47

P645 - MiCOM Transformer Protection IED - 2 or 3 windings 48

P741 - MiCOM Low Impedance Busbar IED - Central Unit 48

P742 - MiCOM Low Impedance Busbar IED - Peripheral Unit 49

P743 - MiCOM Low Impedance Busbar IED - Peripheral Unit 49

P746 - MiCOM Low Impedance Centralised Busbar IED 49

P841 - MiCOM Breaker Failure & Autoreclose IED 50

P849 - MiCOM I/O Extension Device 50

See Integrated Feeder Management Section above 50

VAMP Protection Relays

VAMP50 Overcurrent & Earthfault IED with AutoReclose 52

VAMP59 Line Differential IED 53

VAMP40 Feeder Motor Capacitor IED 54

VAMP52 Feeder Motor IED 54VAMP230 Feeder Motor IED 55VAMP255 Feeder Motor IED 55VAMP257 Feeder Motor IED 55VAMP300 Feeder Motor IED 56

VAMP259 Line Manager - Distance and Differential IED 56

VAMP265 Differential IED 57

VAMP210 Generator IED 57

VAMP55 Voltage/Frequency IED 58

VAMP 11V Voltage/Frequency IED 58

Accessories - Frames 59Accessories - Cables 59Accessories - Profibus Convertor, Alarm Panel, Current Injection, Line amplifier and IO PSU 59Accessories - VIO external IO units 59

VAMP ARC Protection

VAMP120 Arc Unit with 4 sensors 60VAMP121 Arc Unit 60VAMP221 Central Unit 60VAMP321 Central Unit 61Accessories - Sensors, cables and trip relay extension units 62Accessories - Fibre Sensors > 8000 LUX activation 62

Line Manager

Breaker Failure, Autoreclose, I/O extension

Autoreclose & Check Synch

Overcurrent Protection

Line Differential Protection

Feeder - Motor- Capacitor Proection

Line / Cable Distance Protection

Line / Cable Current Differential Protection

Phase Comparsion Protection

Integrated Transformer Management

Busbar Protection

Generator Protection

Voltage & Frequency Protection

Accessories & Cables

ARC PROTECTION

Differential Protection



Sepam series 10 International rangeSepam series 10N 1 earth

ANSI Standard (0.1…24In0) Type Reference Price

50N/51N 24…125Vdc & 100…120Vac Sepam series 10N 11A REL59817 €641

110…250VDC & 100…240VAC Sepam series 10N 11E REL59819 €615

Very sensitive (0.2…24A and 2…240A) Type Reference Price

24…125VDC & 100…120VAC Sepam series 10B 13A REL59818 €667

110…250VDC & 100…240VAC Sepam series 10B 13E REL59820 €638

Sepam Series 10B 2 ph + 1 earth


50N/51N, 50/51, 49RMS



Sepam Series 10B 3 ph + 1 earth


50N/51N, 50/51, 49RMS



Sensitive (0.01…2.4In0) Type Reference Price






Sepam Series 10A 3 ph + 1 earth + comm.


50N/51N, 50/51, 49RMS

24…125VDC & 100…120VAC Sepam series 10A 41A REL59808 €861

110…250VDC & 100…240VAC Sepam series 10A 41E REL59811 €820

220…250VDC Sepam series 10A 41F REL59814 €861

Sensitive (0.01…2.4In0) Type Reference Price



220…250VDC Sepam series 10A 42F REL59815 €943




220…250VDC Sepam series 10A 43F REL59816 €1,025



Sepam series 20-40 � Prices for SEPAM 20 includes: Base unit, 20-pin sc rew connector, 1A/5A CT current connector, software

� Prices for SEPAM 40 includes: Base unit, 20-pin sc rew connector, 6-pin screw-type connector, 1A/5A CT current connector, software

� Optional: Add the TCP/IP firmware option (only for series 40).

Basic UMI

Sepam series 20 Application Type ANSI Price

Substation S20 €961

S24 €1,026

Transformer T20 €1,139

T24 €1,204

Motor M20 €1,297

Busbar B21 €961

B22 €1,751


Substation S40 €1,950

S41 €2,584

S42 €3,464

S43 €1,890

S44 €1,856

S50 €2,088

S51 €2,720

S52 €3,592

S53 €2,032

S54 €1,995


T42 €3,636

T50 €2,280

T52 €3,756

50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 67NC

50/51, CLPU 50/51, 50N/51N, , CLPU 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 50BF, 23/63, 27, 59, 59N, 47, 81H, 81L 46BC

50/51, CLPU 50/51, 50N/51N, , CLPU 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 50BF, 23/63, 27, 59, 59N,

50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 46BC, 27, 59, 59N, 47, 81H, 81L, 50BF

50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 46BC, 27, 59, 59N, 47, 81H, 81L, 67N/67NC, 32P, 50BF

50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 46BC, 27, 59, 59N, 47, 81H, 81L, 67, 67N/67NC, 32P, 50BF

50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 46BC, 67N/67NC, 32P, 50BF

50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 46BC, 27, 59, 47, 50BF

50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L

27D, 27R, 27, 59, 59N, 81H, 81L, 81R

50/51, 50N/51N, 50G/51G, 46, 79, 27, 59, 59N, 47, 81H, 81L , 50BF

50/51, 50N/51N, 50G/51G, 46, 79, 27, 59, 59N, 47, 81H, 81L, 67N/67NC, 32P, 50BF

50/51, 50N/51N, 50G/51G, 46, 79, 27, 59, 59N, 47, 81H, 81L, 67, 67N/67NC, 32P, 50BF

50/51, 50N/51N, 50G/51G, 46, 79, 67N/67NC, 32P, 50BF

50/51, 50N/51N, 50G/51G, 46, 79, 27, 59, 47, 50BF

50/51, 50N/51N, 50G/51G,46, 79

50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 50BF

50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63

50/51, CLPU 50/51, 50N/51N, , CLPU 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 50BF, 23/63

50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66

27D, 27R, 27, 59, 59N, 81H, 81L

Motor M40 €2,278

M41 €2,842

Generator G40 €2,741

47, 81H, 81L, 67, 67N, 67NC, 46BC

50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 50BF

50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 59N, 67N, 67NC, 32P, 32Q/40, 47, 81H, 81L, 50BF

50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 32P, 32Q/40, 50V/51V, 27,59, 59N, 47, 81H, 81L, 38/49T



Integrated advanced UMI



S24 €1,226


T24 €1,404

Motor M20 €1,497

Busbar B21 €1,161

B22 €1,951



S41 €2,744

S42 €3,624

S43 €2,050

S44 €2,016

S50 €2,248

S51 €2,880

S52 €3,752

S53 €2,192

S54 €2,155


T42 €3,796

T50 €2,440

T52 €3,916

Motor M40 €2,438

M41 €3,002

50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 67NC

50/51, CLPU 50/51, 50N/51N, , CLPU 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 50BF, 23/63, 27, 59, 59N, 47, 81H, 81L 46BC

50/51, CLPU 50/51, 50N/51N, , CLPU 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 50BF, 23/63, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 67NC, 46BC

50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 50BF

50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 59N, 67N, 67NC, 32P, 32Q/40, 47, 81H, 81L, 50BF

50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 46BC, 27, 59, 59N, 47, 81H, 81L, 50BF

50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 46BC, 27, 59, 59N, 47, 81H, 81L, 67N/67NC, 32P, 50BF

50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 46BC, 27, 59, 59N, 47, 81H, 81L, 67, 67N/67NC, 32P, 50BF

50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 46BC, 67N/67NC, 32P, 50BF

50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 46BC, 27, 59, 47, 50BF

50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L

27D, 27R, 27, 59, 59N, 81H, 81L, 81R

50/51, 50N/51N, 50G/51G, 46, 79, 27, 59, 59N, 47, 81H, 81L , 50BF

50/51, 50N/51N, 50G/51G, 46, 79, 27, 59, 59N, 47, 81H, 81L, 67N/67NC, 32P, 50BF

50/51, 50N/51N, 50G/51G, 46, 79, 27, 59, 59N, 47, 81H, 81L, 67, 67N/67NC, 32P, 50BF

50/51, 50N/51N, 50G/51G, 46, 79, 67N/67NC, 32P, 50BF

50/51, 50N/51N, 50G/51G, 46, 79, 27, 59, 47, 50BF

50/51, 50N/51N, 50G/51G,46, 79

50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 50BF

50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63

50/51, CLPU 50/51, 50N/51N, , CLPU 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 50BF, 23/63

50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66

27D, 27R, 27, 59, 59N, 81H, 81L


TCP/IP firmware option (for series 40 only)

TCP/IP firmware option TCP/IP 59754 €199

32Q/40, 47, 81H, 81L, 50BF

50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 32P, 32Q/40, 50V/51V, 27,59, 59N, 47, 81H, 81L, 38/49T



Sepam series 60 � Prices for SEPAM 60 includes: Base unit, 2x 20-pin screw connector, 1A/5A CT current connector, memor y cartridge, software

� Add DSM303 to SEPAM series 60 without UMI

� Optional: Add the TCP/IP firmware option

Without UMI



S62 €3,874


T62 €4,170

Motor M61 €3,190


G62 €4,970

Capacitor C60 €2,266

With advanced UMI



S62 €4,034


T62 €4,330

Motor M61 €3,350


G62 €5,130


With mimic-based UMI

50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 67N, 67NC, 32P, 32Q/40, 12, 14, 47, 81H, 81L, 26/63, 50BF

50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 32P, 32Q/40, 50V/51V, 27,59, 59N, 47, 81H, 81L, 38/49T, 37P, 40, 12, 14, 21B, 27D, 27R, 81R, 26/63, 25

50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 32P, 32Q/40, 50V/51V, 27,59, 59N, 47, 81H, 81L, 38/49T, 37P, 40, 12, 14, 21B, 27D, 27R, 81R, 26/63, 25, 67, 67N, 67NC

50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 38/49T



50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 81R,

50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 81R, 67, 67N, 32P, 49RMS

50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 64REF, 27D, 27R

50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 67NC, 64REF, 27D, 27R

50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 81R,








S62 €4,234


T62 €4,530

Motor M61 €3,550


G62 €5,330


TCP/IP firmware option








50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 81R,




Sepam series 80 � Prices for SEPAM 80 includes: Base unit, 2x 20-pin screw connector, 1x 1A/5A CT current connector, me mory cartridge, software

� Add DSM303 to SEPAM series 80 without UMI

� Optional: Add the TCP/IP firmware option

� Optional: Add the Logipam option

Without UMI



S81 €3,191

S82 €4,719

S84 €5,711


T82 €5,451

T87 €6,651

Motor M81 €3,691

M87 €5,171

M88 €6,171


G87 €6,773

G88 €7,803

Busbar B80 €2,504

B83 €3,747


50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 38/49T, 37, 37Q/40, 27D, 27R, 27, 59, 59N, 47, 67, 67N, 67NC, 32P, 32Q/40, 12, 14, 81H, 81L, 40, 78PS, 87T, 21B , 50V/51V, 50/27, 27TN/64G2, 24, 25, 64REF

50/51, 50N/51N, 50G/51G, 46, 50BF, 27D, 27R, 27, 59, 59N, 81H, 81L, 81R, 25

50/51, 50N/51N, 50G/51G, 46, 50BF, 27D, 27R, 27, 59, 59N, 81H, 81L, 81R, 25

50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 38/49T, 51C

50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 67NC, 64REF, 27D, 27R, 87T

50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 67N, 67NC, 32P, 32Q/40, 12, 14, 47, 81H, 81L, 26/63, 78PS, 50BF

50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 67N, 67NC, 32P, 32Q/40, 12, 14, 47, 81H, 81L, 78PS, 87M, 50BF

50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 67N, 67NC, 32P, 32Q/40, 12, 14, 47, 81H, 81L, 26/63, 78PS, 87T, 50BF

50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 32P, 32Q/40, 50V/51V, 27,59, 59N, 47, 81H, 81L, 38/49T, 37P, 40, 12, 14, 21B, 27D, 27R, 26/63, 25, 67, 67N, 67NC, 64REF, 78PS, 50/27, 27TN/64G2, 24

50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 38/49T, 37, 37Q/40, 37P, 27D, 27R, 27, 59, 59N, 47, 67, 67N, 67NC, 32P, 32Q/40, 12, 14, 81H, 81L, 26/63, 40, 78PS, 87M, 21B , 50V/51V, 50/27, 27TN/64G2, 24, 25, 40

50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L

50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 67N, 32P, 49RMS

50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 32P 49RMS

50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 81R, 67, 67N, 32P, 37P 49RMS

50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 67N, 67NC, 64REF, 27D, 27R


With advanced UMI



S81 €3,431

S82 €4,959

S84 €5,951


T82 €5,691

T87 €6,891

Motor M81 €3,931

M87 €5,411

M88 €6,411


G87 €7,013

G88 €8,043

Busbar B80 €2,744

B83 €3,987


50/51, 50N/51N, 50G/51G, 46, 50BF, 27D, 27R, 27, 59, 59N, 81H, 81L, 81R, 25





50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 38/49T, 37, 37Q/40, 37P, 27D, 27R, 27, 59, 59N, 47, 67, 67N, 67NC, 32P, 32Q/40, 12, 14, 81H, 81L, 26/63, 40, 78PS, 87M, 21B , 50V/51V, 50/27, 27TN/64G2, 24, 25, 40


50/51, 50N/51N, 50G/51G, 46, 50BF, 27D, 27R, 27, 59, 59N, 81H, 81L, 81R, 25







27, 59, 59N, 47, 81H, 81L, 38/49T, 51C

50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L




With mimic-based UMI



S81 €3,751

S82 €5,279

S84 €6,271


T82 €6,011

T87 €7,211

Motor M81 €4,251

M87 €5,731

M88 €6,731


G87 €7,333

G88 €8,363

Busbar B80 €3,064

B83 €4,307


Logipam option

Logipam SFT080 59711 €643

TCP/IP firmware option



50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 38/49T, 37, 37Q/40, 37P, 27D, 27R, 27, 59, 59N, 47, 67, 67N, 67NC, 32P, 32Q/40, 12, 14, 81H, 81L, 26/63, 40, 78PS, 87M, 21B , 50V/51V, 50/27, 27TN/64G2, 24, 25, 40,


50/51, 50N/51N, 50G/51G, 46, 50BF, 27D, 27R, 27, 59, 59N, 81H, 81L, 81R, 25

50/51, 50N/51N, 50G/51G, 46, 50BF, 27D, 27R, 27, 59, 59N, 81H, 81L, 81R, 25








50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L






Accessories Sepam series 10, 20, 40, 60, 80Mounting accessories Reference Price

Mounting plate for Sepam series 20/40 base unit and MCS025 module

AMT840 59670 €95.20

Mounting plate for Sepam series 60/80 base unit AMT880 59706 €103.20

Blanking plate AMT820 59699 €79.20

AMT840 AMT880

Sealing accessories Sepam series 20 - 40 - 60- 80 Reference Price

Sealing accesory for Sepam series 20/40 base unit

AMT852 59639 €84.00

Sealing accessory for Sepam series 60/80 base unit

AMT852 59639 €84.00

AMT852

Software tools Sepam series 20 - 40 - 60- 80 Reference Price

PC connection cord Usb / Usb connection CCA700 59700 €15.20

PC connection cord - RS232 connection CCA783 59664 €15.20

PC connection cord - USB connection CCA784 59671 €47.20

Configuration software CD CD SFT2841 59679 €23.20

Logipam software CD CD SFT 2885 59727 €23.20

IEC 61850 Configuration software CD CD SFT850 59726 €47.20

Input/output modules Reference Price

Sepam series 20 - 40

10 inputs + 4 outputs 24-250 V DC MES114 59646 €279.20

10 inputs + 4 outputs 110-125 V DC / V AC MES114E 59651 €319.20

10 inputs + 4 outputs 220-250 V DC / V AC MES114F 59652 €303.20

Sepam series 60 - 80

MES114 14 inputs + 6 outputs 24-250 V DC MES120 59715 €479.20

MES120 14 inputs + 6 outputs 220-250 V DC MES120G 59716 €503.20

14 inputs + 6 outputs 110-125 V DC MES120H 59722 €495.20

Remote modules and cords Sepam series 20 - 40 - 60- 80 Reference Price

Remote modules

8 temperature sensors module MET148-2 59641 €263.20

Analog output module MSA141 59647 €263.20

Remote advanced UMI module DSM303 59608 €308.00

MSA141 MET148-2 DSM303Remote module connection cord L = 0.6 m CCA770 59660 €8.00MSA141 MET148-2 DSM303Remote module connection cord L = 0.6 m CCA770 59660 €8.00

Remote module connection cord L = 2 m CCA772 59661 €16.00

Remote module connection cord L = 4 m CCA774 59662 €24.00

Synchro-check module

Synchro-check module (with CCA785 connection cord)

MCS025 59712 €799.20

MCS025 connection cord CCA785 59665 €24.00

MCS025

Communication accessories Sepam series 20 - 40 - 60- 80 Reference Price

Sepam communication interfaces

2-wire RS 485 network interface (CCA612 not included)

ACE949-2 59642 €79.20

4-wire RS 485 network interface (CCA612 not included)

ACE959 59643 €103.20

ACE937 ACE949-2 ACE959 Fiber optic interface (CCA612 not included)

ACE937 59644 €135.20

Communication cord L = 3 m CCA612 59663 €24.00

2-wire RS 485 multiprotocol network interface (CCA612 not included)

ACE969TP-2 59723 €599.20

Fiber optic multiprotocol network interface (CCA612 not included)

ACE969FO-2 59724 €679.20

IEC61850 Sepam Server(with surge protection) ECI850 59638 €679.20

ACE 909-2 ACE969TP-2 ACE969FO-2 10/100 baseTX TCP/IP interface * ACE850TP 59658 €959.20

100FX base TCP/IP interface * ACE850FO 59659 €1,119.20

Communication cord L = 3 m for ACE850 module CCA614 59751 €24.00

TCP/IP firmware option * TCP/IP 59754 €199.00

Converters

RS 232 / RS 485 converter AC909-2 59648 €1,119.20

RS 485 / RS 485 interface (AC) ACE919CA 59649 €1,039.20

IEC 61850 RS 485 / RS 485 interface (DC) ACE919CC 59650 €1,076.00



Sensors Reference Price

Core balance CTs

Residual current sensor Ø 120 CSH120 59635 €167.20

Residual current sensor Ø 200 CSH200 59636 €279.20

Interposing ring CT for residual current input CSH30 59634 €79.20

CSH120 Core balance CT interface ACE990 59672 €959.20

LPCT accessories (1)

LPCT injection adapter ACE917 59667 €2,499.00

Remote LPCT test plug CCA613 59666 €299.00

Spare parts Sepam series 10, 20, 40, 60, 80Spare connectors Reference Price

Sepam

20-pin screw-type connector CCA620 59668 20.80 €

20-pin ring lug connector CCA622 59669 20.80 €

6-pin screw-type connector CCA626 59656 10.40 €

6-pin ring lug connector CCA627 59657 10.40 €

CCA620 CCA622 CCA630 CCA671 CCT6401A / 5A CT current connector CCA630 59630 80.00 €

1A / 5A CT +I0 current connector CCA634 59629 136.00 €

LPCT lateral current connector, series 20&40 CCA670 59631 86.10 €

LPCT radial current connector, series 80 CCA671 59702 86.10 €

VT voltage connector CCT640 59632 86.10 €

Sepam Series 60 - 80 spare parts Reference Price

Sepam base units Sepam series 60

Without UMI SEP060 59835 1,920.00 €

With advanced UMI SEP363 59836 2,080.00 €

With mimic based UMI SEP666 59837 2,280.00 €

Without UMI Advanced UMI Mimic-based UMI Sepam series 80

Without UMI SEP080 59703 2,160.00 €

With advanced UMI SEP383 59704 2,400.00 €

With mimic-based UMI SEP888 59705 2,720.00 €

(1) not available for Sepam serie 10

* for Sepam series 40, 60 & 80 only


SEPAM, MiCOM and VAMP Price Guide 2015 Section: 02- MiCOM Px10 series

MiCOM Px10 Series

TYPE & DESCRIPTION ANSI CASE PRICE

NON DIRECTIONAL OVERCURRENTP111 - EnhancementModel A - 3 Ph O/C and E/F; 4BI/8BO; RS485 (Modbus/IEC103); USB 50/51, 50N/51N, 50BF, 49, 86 FLUSH 592.00 €

Model B - 3 Ph O/C and E/F; 4BI/4BO; RS485 (Modbus/IEC103); USB 50/51, 50N/51N, 50BF, 49, 86 FLUSH 510.00 €

Model E - 3 Ph O/C and E/F; 8BI/6BO; RS485 (Modbus/IEC103); USB 50/51, 50N/51N, 50BF, 49, 86, 46,

79FLUSH 740.00 €

Model N - 3 Ph O/C and E/F; 0BI/6BO; RS485 (Modbus/IEC103); USB 50/51, 50N/51N, 50BF, 49, 86 FLUSH 473.00 €

Model L - 3 Ph O/C and E/F; 0BI/4BO 50/51, 50N/51N, 50BF, 86 FLUSH 387.00 €

Communication Option for Model LOptional rear port RS485 (Modbus/IEC103) 39.00 € Accessories dedicated for all models of P111EnhWall mounting case adaptor 42.00 € Front cover preventing from unauthorised access 61.00 €

SELF/DUAL POWERED OVERCURRENT (CT POWERED)P114D

Self powered three phase overcurrent and earth fault protection, dip switches for setting, wall or flush mounting case, 2 BI and 4 BO, RS485 (Modbus and IEC103)

50/51, 50/51Nsmall

compact830.00 €

Hardware Options

Optional tripping output for sensitive CB coil, striker or MiTOP : 12-24Vdc/0.1J 72.00 € dual powered (aux. power supply ) 89.00 € P115Self powered three phase overcurrent and earth fault protection. Display , wall or flush mounting case. USB front port, 2 BI, 4 BO, RS485 (Modbus and IEC103)

50/51, 50/51N,46, 50BF

small compact

1,145.00 €

Hardware Options

Optional tripping output for sensitive CB coil, striker or MiTOP : 12-24Vdc/0.1J 72.00 €

dual powered (aux. power supply ) 89.00 €

P116 Model A

Dual powered Three Phase Overcurrent and Earth Fault Protection. Display , flush mounting case, USB front port, 6BI, 7BO, RS485 (Modbus and IEC103), energy output for sensitive CB Coil 12-24Vdc/0.1J and external flag indicator 24Vdc/0.01J

37, 46, 46BC, 49, 50, 51, 79 50N, 51N, 50BF, 86

small compact

1,355.00 €

Hardware Options

Binary Inputs: 24-240Vac or 24-250Vdc (standard) -

Binary Inputs with settable switching thesholds (eg.110Vdc/129Vdc/220Vdc) 53.00 €

Additional 4 electro-magnetic flags 174.00 €

Accessories for P116

Wall mounting case adaptor 153.00 €

Flush mounting case adaptor for withdrawable solution 153.00 €

P116 Model LCost Efective Self powered Three Phase Overcurrent and Earth Fault ProtectionDisplay, flush mounting case, USB front port, 1BO + watchdog contact, energy output for sensitive CB Coil 12-24Vdc/0.1J

49, 50, 51, 50N, 51Nsmall

compact1,126.00 €

Accessories for P116


Flush mounting case adaptor for withdrawable solution 153.00 €

FI-10external flag indicator for P114S/D, P115 and P116, flush mounting, 83.00 €

MOTOR PROTECTIONP211- MODEL AThree phase motor protection and control; AC or DC power supply. 2 Binary inputs and 2 Binary outputs.

37, 38, 46, 48, 49, 50/51, 51LR

35mm rail: 100mm mounting case DIN RAIL 283.00 €

106,5mm Flush mounting case FLUSH 302.00 €

P211 - MODEL BThree phase and earth fault motor protection and control; AC or DC power supply. 2 Binary inputs and 2 Binary outputs, Rear port RS485 (modbus);

37, 38, 46, 48, 49, 50/51, 51LR, 50N/51N35mm rail: 100mm mounting case DIN RAIL 410.00 €


P211 - MODEL CThree phase and earth fault motor protection and control; AC or DC power supply. 4 Binary inputs and 4 Binary outputs, Rear port RS485 (modbus);

37, 38, 46, 48, 49, 50/51, 51LR, 50N/51N35mm rail: 100mm mounting case DIN RAIL 454.00 €


Voltage & Frequency ProtectionRefer to the section "06 - VAMP series"


SEPAM, MiCOM and VAMP Price Guide 2015 Section: 03 - MiCOM Px20 series

MiCOM Px20 Series


MiCOM Single Phase Overcurrent Protection. 2 opto inputs and 4 output relays. 50, 51, 50N, 51N, 86 20TE 828.00 € Product Software optionDefault latest software version - Customer specified and / or customised version On Request

MiCOM Three Phase Overcurrent and Earth Fault Protection. 2 opto inputs and 4 output relays. No records available.

50, 51, 50N, 51N, 86 20TE 894.00 €

Product Software optionDefault latest software version - Customer specified and / or customised version On Request

MiCOM Three Phase Overcurrent and Earth Fault Protection with Thermal Overload, Negative Phase Sequence Protection, breaker failure protection, TCS and Inrush blocking. 3 opto inputs and 6 output relays.

37, 46, 46BC, 49, 50, 51, 50N, 51N, 50BF, 86

20TE 1,075.00 €

P120X Hardware Options

Stabilising resistor for use in high impedance Restricted Earth Fault applications 62.00 €


MiCOM Three Phase Overcurrent and Earth Fault Protection with Thermal Overload, Negative Phase Sequence, Circuit breaker monitoring, 4 shots recloser, breaker failure,TCS and Inrush blocking. 5 opto inputs and 8 output relays.

37, 46, 46BC, 49, 50, 51, 50N, 51N, 50BF, 79, 86

20TE 1,437.00 €


HW adapted to replace KCGG; same software to P123 Phase 237, 46, 46BC, 49, 50, 51, 50N, 51N,

50BF, 79, 86 20TE 1,444.00 €


MiCOM Directional Earth fault relay, with residual overvoltage and wattmetric earth fault protection. 4 opto inputs and 6 output relays.

32N, 50N/67N, 51N/67N, 59N, 86

20TE 975.00 €


MiCOM Three Phase Overcurrent and Directional Earth Fault Protection, with 4 shot Auto-reclose, wattmetric earth fault, negative sequence and residual overvoltage protection. 7 opto inputs and 8 output relays.

32N, 37, 46, 46BC, 49, 50, 51, 50N/67N, 51N/67N, 50BF, 59N, 79,

86 30TE 1,797.00 €


MiCOM Three Phase Directional Overcurrent and Directional Earth Fault Protection, with under/over voltage, under/over frequency, overpower protection function with 4 shot Auto-reclose and supplementary functions. 7 opto inputs and 8 output relays.

32N, 37, 46, 46BC, 49, 50, 51, 50N/67N, 51N/67N, 50BF, 59N, 79,

86 30TE 1,953.00 €

Product Specific Options12 opto inputs (additional 5 inputs) 404.00 € 2nd RS485 port and modulated/demodulated IRIG-B 389.00 €

12 opto inputs (additional 5 inputs), 2nd RS485 port and modulated/demodulated IRIG-B 557.00 €

2 additional measurements CT 210.00 €

2 add. measurements CT + 12 opto inputs (additional 5 inputs) 614.00 €

2 add. measurements CT + 2nd RS485 port and modulated/demodulated IRIG-B 599.00 €

2 add. measurements CT + 12 opto inputs (additional 5 inputs), 2nd RS485 port and modulated/demodulated IRIG-B

767.00 €

Ethernet 2*RJ45 interfaces, 100Mbps 360.00 €

Product Software option

Default latest software version -

Customer specified and / or customised version On Request

Overcurrent ProtectionP120

P121

P122

P123

P123R - Retrofit solution

P125

P126

P127



MiCOM Motor Protection. Phase 2 hardware with 6 opto inputs and 6 output relays. Same case size and hardware/software as P225 except P220 does not include a voltage input and voltage protection.

14, 37, 38, 46, 48, 49, 50, 50BF, 51, 50N, 51N, 50S, 51LR, 66, 86

30TE 1,329.00 €

Product Specific Options (RTD or Thermister Module , not both)

6 RTD Input Module 501.00 €

3 thermistor Input Module 294.00 €

2 Analogue Outputs 312.00 €





MiCOM Motor Protection with single phase voltage input. 6 opto inputs and 6 output contacts

14, 27, 37, 38, 46, 48, 49, 50, 50BF, 51, 50N, 51N, 50S, 51LR, 59, 66, 86

30TE 1,899.00 €

Product Specific Options (RTD or Thermister Module , not both)

10 RTD Input Module OR 501.00 €

3 thermistor Input Module 293.00 €

2 Analogue Outputs 311.00 €






MiCOM Motor Protection with three phase voltage input. 6 opto inputs and 6 output contacts

14, 27, 37, 38, 46, 48, 49, 50, 50BF, 51, 50N, 51N, 50S, 51LR, 59, 66, 86

30TE 2,298.00 €

Product Specific Option




MiCOM feeder differential protection, 2-end, 5 binary inputs and 8 output relays.87L, 50/50N, 51/51N, 64, 46, 49,

46BC30TE

EIA RS232 version 2,832.00 € EIA RS485 version 2,832.00 €

850nm fibre optic interface version 2,980.00 €

1300nm fibre optic interface versions (Single or Multimode) 3,790.00 €

P521 Options and Accessories

MT-RS485 surge protection module 116.00 €

PCM-FLU10 isolating transformer 10kV 419.00 €

PCM-FLU20l isolating transformer 20kV 475.00 €

TD-36 DC voice modem, for conditioned pilots 1,313.00 €

MODEM : Keymile Linerunner DTM Modem - (V36 interface included) 1,313.00 €

P520L Loopback test Box VA0041-010 1,051.00 €



P225 - SINGLE VOLTAGE INPUT - Phase 2

Motor ProtectionP220 - Phase 2

P225 - THREE VOLTAGE INPUT - Phase 2

Line Differential ProtectionP521 - Phase 2



P591 G703 Interface Module for the P540 range, P521, P443 & P445. 1,298.00 €

P593 X21 Interface Module for the P540 range, P521, P443 & P445. 1,582.00 €

P594 High accuracy GPS synchronising module. Also used with P543 - P546 for unequal propogation delay SONET/SDH communications. New enhanced model with IRIG-B, pulse and fibre outputs for use as the single substation time reference.

P594 GPS module only 2,186.00 €

25 metre cable, antenna and surge arrester 986.00 €

50 metre cable, antenna, surge arrester and amplifier 1,586.00 €

P595 Interface Device 2,020.00 €

P-2M-LXA 850nm Multi-mode MICOM G703 Optic/Electric Interface Unit for the P540 range, P521, P443, P445 & P446.

19", 1U rack 1,629.00 €

P-2M-LXB 1300nm Single mode MICOM G703 Optic/Electric Interface Unit for the P540 range, P521, P443, P445 & P446.

19", 1U rack 2,029.00 €

Short-haul direct EAI 485 pilot connection (4 wire) up to 1.2km Comprising 2 x P521, and 2 x MT485.

P521 SCHEME A 5,896.00 €

Conditioned pilots (2 wire) scheme, MODEM link Comprising 2 x P521, and 2 x TD-36 modems.

P521 SCHEME B 8,291.00 €

Conditioned pilots (4 wire) scheme, MODEM link Comprising 2 x P521, and 2 x TD-36 modems.

P521 SCHEME C 8,291.00 €

Direct pilot connection (2 wire), up to 16km with 10kV pilot isolation Comprising 2 x P521, 2 x DTM modems, and 2 x 10kV PCM-FLU.

P521 SCHEME D 9,129.00 €

Direct pilot connection (2 wire), up to 16km with 20kV pilot isolation Comprising 2 x P521, 2 x DTM modems, and 2 x 20kV PCM-FLU.

P521 SCHEME E 9,241.00 €

Direct EAI 485 pilot connection (4 wire), up to 25km with 10kV pilot isolation Comprising 2 x P521, 2 x P595, and 4 x 10kV PCM-FLU.

P521 SCHEME F 11,434.00 €

Direct EAI 485 pilot connection (4 wire), up to 25km with 20kV pilot isolation Comprising 2 x P521, 2 x P595, and 4 x 20kV PCM-FLU.

P521 SCHEME G 11,670.00 €

NOTE: PRICE IS FOR LOOSE EQUIPMENT ONLY, SEND AND RECEIVE ENDS INCLUDED, NO TEST BLOCKS

MiCOM Numerical Restricted Earth Fault protection relay, 2 opto inputs and 4 output contacts.

64 20TE 893.00 €


MiCOM Numerical High Impedance Busbar protection, 5 opto inputs and 8 output contacts. Includes REF protection as a complementary alternative application.

87, (64) 20TE 1,586.00 €


Accessory for use with P721 in numerical high impedance REF protection schemes. Includes stabilising resistors, and repeat contact for buswire shorting. Convenient housing in a MiCOM case.

20TE

Base model without buswire voltage limiting (use external Metrosil - price not included here)

473.00 €

Model with integral varistance for buswire voltage limitation 609.00 € Model with additional varistance for higher energy dissipation 746.00 €

Accessory for use with P723 in numerical high impedance busbar protection schemes. Includes stabilising resistors, and repeat contact for buswire shorting. Convenient housing in a MiCOM case.

30TE

Base model without buswire voltage limiting (use external Metrosil - price not included here)

536.00 €

Model with integral varistance for buswire voltage limitation 946.00 € Model with additional varistance for higher energy dissipation 1,355.00 €

Stabilising resistor for use with P121, P122 or P141 relays in numerical high impedance applications. Use one per phase.

bop 62.00 €

Stabilising Resistor

P59x suffix B

P-2M-L

MiCOM P521 Standard Schemes

High Impedance Differential ProtectionP721

P723

P791

P793



MiCOM stand-alone breaker failure relay, for single and three pole tripping applications. Includes undercurrent check, plus two timer stages for re-tripping and backtripping, phase, residual and negative sequence current detection, dead zone protection, current measurement based pole discrepancy. 5 binary inputs and 8 output relays.

50BF 20TE 1,173.00 €


MiCOM voltage and neutral displacement protection with under/over voltage elements. 2 inputs and 4 outputs.

27, 59, 59N 20TE 937.00 €


MiCOM Voltage and neutral displacement Protection, with under/ over voltage and under/over frequency protection. 5 inputs and 8 outputs

27, 27D, 47, 59, 59N, 81U, 81O 20TE 1,419.00 €


MiCOM Voltage and frequency protection with under/ over voltage, under/over frequency, dF/dt and dV/dt protection. 5 inputs and 8 outputs

27, 27D, 27/59R, 47, 59, 59N, 81U, 81O, 81R

20TE 1,791.00 €


RS232/USB cable for MiCOM relays (can be used to supply MiCOM Px2x relays through front RS232 port)

200.00 €

Isliker Striker for self powered relays (GPA-50.1 / V668) 438.00 €

Capacitor trip unit (additional energy to drive higher wattage trip coils). 503.00 €

Accessories & CablesE2 - RS232/USB cable

STRIKER

E124 - Capacitor trip unit

Breaker Fail ProtectionP821 Phase 2

Voltage & Frequency ProtectionP921 Phase 2

P922 Phase 2

P923 Phase 2



MiCOM Px30 Series

TYPE & DESCRIPTION ANSI PRICE

MiCOM non-directional Feeder Management with auto-reclose and motor protection. Surface-/flush-mounting compact case, 2 binary inputs and 8 output relays, pin-terminals, with CT inputs only.

50/51, 50N/51N, 85, 79, 37, 48, 49, 49LR, 50S, 66, 46, 50BF, 86

1,863.00 €

Software OptionsDefault Software Version -

Customer specified and / or customised version Please contact Schneider Electric On Request

Communications Options

Protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd

rear port (RS 485, Optical interface, IEC 60870-5-103)474.00 €

InterMiCOM full-duplex protection signalling interface 481.00 €

MiCOM Feeder Management with auto-reclose and motor protection. Surface-/flush-mounting compact case, 2 binary inputs and 8 output relays, pin-terminals, with CT and VT inputs.

50/51, 50N/51N, 67P,67N, 67W/YN, 85, 79, 37, 48, 49, 49LR, 50S, 66, 46, 27, 47, 59, 81,32, 50BF, 86

2,111.00 €







MiCOM Feeder Management with auto-reclose and motor protection. Basic device with 4-pole CT inputs, 4 binary inputs and 8 output relays, 6 function keys, wall or flush mounting case.

50/51, 50N/51N, 50BF, 85, 79, 37, 46, 48, 66, 49, 49LR, 50S, 86

Pin terminal model 2,096.00 € Ring terminals on ac measurements inputs (heavy duty terminal block), pin-terminals on binary I/O

2,149.00 €


2,391.00 €

Ring terminal model 2,512.00 € Software OptionsDefault Software Version - Customer specified and / or customised version Please contact Schneider Electric On RequestProduct Specific Options

4VT input module for directionalising 67P, 67N, 67W/YN, 27, 47, 59, 32 583.00 €

Alternative 5VT module for directional plus synch. Check 67P, 67N, 67W/YN, 27, 47, 59, 32, 25 1,142.00 € Transient ground fault evaluation module 406.00 € RTD interface module 494.00 € Higher switching thresholds on binary inputs 112.00 € Detachable HMI (DHMI) 562.00 € First control-I/O module (with 6 binary inputs and 6 binary outputs) provided with high speed high break contacts (1-pole)

189.00 €

Both control-I/O modules (with 6 binary inputs and 6 binary outputs) provided with high speed high break contacts (1-pole)

378.00 €

Hardware OptionsModule with 6 binary inputs and 3 output relays 326.00 € Module with 6 binary inputs and 6 output relays 521.00 € Module with 6 binary inputs and 8 output relays 415.00 € Module with 6 output relays 209.00 € Module with 4 high speed high break contacts 313.00 € Binary module with 24 binary inputs 736.00 € Analogue I/O module 492.00 € Communications OptionsProtocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd


IEC 61850 Ethernet communications (Single Port) 495.00 € Redundant Ethernet (2 ports 1300nm Multimode) with IRIG-B 765.00 €


CASE

Non-Directional Overcurrent ProtectionP130C

Compact

Compact

Directional Overcurrent ProtectionP130C

40TE

40TE

84TE

INTEGRATED FEEDER MANAGEMENTP132

24TE

24TE



MiCOM One Box Numerical Feeder Management, non-directional time o/c and sens.e/f protection with bay unit for control/ monitoring, with auto-reclose and motor protection. Basic device with 4-pole CT inputs only, 10 binary inputs and 14 output relays, wal

50/51, 50N/51N, 50BF, 85, 79, 37, 46, 48, 66, 49, 49LR, 50S, 86

Pin terminal model 3,443.00 € Ring terminals on AC measurements inputs (heavy duty terminal block), pin-terminals on binary I/O

3,496.00 €

Ring terminal model 3,597.00 € Software OptionsDefault Software Version - Customer specified and / or customised version Please contact Schneider Electric On RequestProduct Specific Options


Alternative 5VT module for directional plus synch. Check 67P, 67N, 67W/YN, 27, 47, 59, 32, 25 1,142.00 € Transient ground fault evaluation module 406.00 € RTD interface module 494.00 € Higher switching thresholds on binary inputs 112.00 € Detachable HMI (DHMI) 562.00 € First control-I/O module (with 6 binary inputs and 6 binary outputs) provided with high speed high break contacts (1-pole)

189.00 €


378.00 €

Hardware OptionsModule with 6 binary inputs and 3 output relays 326.00 € Module with 6 binary inputs and 6 output relays 521.00 € Module with 6 output relays 209.00 € Module with 4 high speed high break contacts 313.00 € Binary Module with 24 binary inputs 736.00 € Analogue I/O Module 492.00 € Communications OptionsProtocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd


IEC 61850 Ethernet communications (Single Port) 495.00 €

Redundant Ethernet (2 ports 1300nm Multimode) with IRIG-B 765.00 €


Distance protection, 3-pole tripping, basic complement 2 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display,

21P/N, 68, 85, 79, 25, 50P/Q/N, 51P/Q/N, 67P/Q/N, 49, 27P,

59P/Q/N/G, 81O/U/R, 325,028.00 €

Software Options

Default Software Version -



protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd

rear port (RS 485, IEC 60870-5-103)474.00 €


P139

40TE

40TE

84TE

LINE / CABLE DISTANCEP430C

compact



Distance protection, 3-pole tripping, basic complement 4 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display,

21P/N, 68, 68T, 85, 79, 25, 50P/Q/N, 51P/Q/N, 67P/Q/N, 49, 27P, 59P/Q/N/G, 81O/U/R, 32,

50BF

basic device, pin-terminal connection 6,813.00 €

basic device, ring-terminal connection 8,266.00 €

Software Options


Customer specified and / or customised version Please contact Schneider Electric

Product Specific Options

Higher switching thresholds on binary inputs 112.00 €

Voltage-measuring input for synchrocheck 131.00 €

Detachable HMI (DHMI) 562.00 €

Hardware Options

Module with 6 output relays 209.00 €

Module with 6 binary inputs and 3 output relays 326.00 € Module with 6 binary inputs and 6 output relays 521.00 € Module with 4 high speed high break contacts 313.00 €

Module with 6 binary inputs and 8 output relays 415.00 €

Transient ground fault evaluation module 406.00 €

Module with 24 binary inputs 736.00 € Analogue I/O module 492.00 €



rear port (RS 485, IEC 60870-5-103)474.00 €

with IEC 61850 ethernet communications (Single Port) 495.00 €



Distance protection, 1/3-pole tripping, basic complement 4 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display,


50BF




Software Options







Hardware Options


Module with 6 binary inputs and 3 output relays 326.00 € Module with 6 binary inputs and 6 output relays 521.00 €

Module with 4 high speed high break contacts 313.00 €



Module with 24 binary inputs 736.00 €

Analogue I/O module 492.00 €



rear port (RS 485, IEC 60870-5-103)474.00 €




40TE

84TE

P433

84TE

P435

40TE

84TE



Distance protection, full scheme, basic complement 4 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display,


50BF



Software Options






Current-measuring input for mutual compensation 418.00 €

Hardware Options





rear port (RS 485, IEC 60870-5-103)474.00 €




Distance protection (3-pole tripping) with bay unit for control and monitoring (one-box), basic complement 4 binary inputs and 8 output relays and 6 binary inputs and 6 output relays for the control of 3 switchgear units, surface-mounting or flush-mounting, local control panel with graphic display,


50BF



Software Options







First control-I/O module (with 6 binary inputs and 6 binary outputs) provided with high speed high break contacts (1-pole)

189.00 €


378.00 €

Hardware Options






Analogue I/O module 492.00 €

Binary module with 24 binary inputs 736.00 €



rear port (RS 485, IEC 60870-5-103)474.00 €




84TE

84TE

P437

P439

40TE

84TE



MiCOM feeder differential protection, 2-end, with auto-reclose. Surface-/flush-mounting compact case, 2 binary inputs and 8 output relays, pin-terminals. Including guidance interface PCOMM

87P, 50P/Q/N, 51P/Q/N, 50/27, 79, 46, 49, 50BF

3,053.00 €


3 pole voltage inputs 67, 85, 32, 67N, 27P/Q/N, 59P/Q/N 420.00 €




P530C Options and AccessoriesMT-RS485 surge protection module 116.00 € PCM-FLU20l isolating transformer 20kV 475.00 € P53x or InterMiCOM Accessories

CZ-922 : Power supply module 24 V, Vin: 36 to 264 V DC and 82 to 240 V AC 384.00 €

OZD-485 : Converter glass fibre (Monomode 10/125µm, ST) into RS485 2,627.00 €

MiCOM Feeder differential protection, 2-end, with auto-reclose. Basic device with 4-pole CT inputs only, 4 binary inputs and 8 output relays, Text-HMI with 6 function keys, wall or flush mounting case. Including guidance interface PCOMM.

87P, 50P/Q/N, 51P/Q/N, 50/27, 79, 46, 49, 50BF


3,651.00 €

Pin terminal model 4,166.00 € Ring terminal model 4,313.00 € Software OptionsDefault Software Version - Customer specified and / or customised version Please contact Schneider Electric On RequestProduct Specific Options


Alternative 5VT module for directional plus synch. Check67P, 67N, 67W/YN, 27, 47, 59, 32,

251,142.00 €


RTD interface module 494.00 €


Graphical-HMI for full control functionality (depend on the number of control I/O-module (with 6 binary inputs and 6 binary outputs)

683.00 €

Control-I/O module (with 6 binary inputs and 6 binary outputs) provided with high speed high break contacts (1-pole)

189.00 €

Hardware OptionsModule with 6 binary inputs and 3 output relays 326.00 €





Binary Module with 24 binary inputs 736.00 € Analogue I/O module 492.00 € Communications OptionsProtocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd




P532 AccessoriesMT-RS485 surge protection module 116.00 € PCM-FLU20 isolating transformer 20kV 475.00 €

P53x or InterMiCOM Accessories

CZ-922 : Power supply module 24 V, Vin: 36 to 264 V DC and 82 to 240 V AC 384.00 €

OZD-485 : Converter glass fibre (Monomode 10/125µm, ST) into RS485 2,627.00 €

LINE DIFFERENTIAL P530C

84TE84TE

DIN-Rail

DIN-Rail

P532

40TE

40TE

DIN-Rail

DIN-Rail



Numerical transformer differential protection, 2-end, basic complement 2 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display,

87T, 50P/Q/N/G, 51P/Q/N/G, 49 3,079.00 €

Software Options





rear port (RS 485, IEC 60870-5-103)474.00 €


Transformer differential protection, 2-end, basic complement 4 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display,

87T, 50P/Q/N/G, 51P/Q/N/G, 49, 50BF



Software Options


Customer specified and / or customised version Please contact Schneider Electric




Hardware Options

module with 6 output relays 209.00 €

module with 4 high speed high break contacts 313.00 €



rear port (RS 485, IEC 60870-5-103)474.00 €




87T/N(REF), 50P/Q/N/G, 51P/Q/N/G, 49, 81O/U/R, 27, 59,

24, 50BF



Software Options






Hardware Options

module with 6 binary inputs and 6 output relays 521.00 €


binary module with 24 binary inputs 736.00 €

analogue I/O module 492.00 €



Communications Options (P632)


rear port (RS 485, IEC 60870-5-103)474.00 €



P631

INTEGRATED TRANSFORMER MANAGEMENTP630C

Compact

40TE

40TE

84TE

P632

40TE





24, 50BF




Software Options






Hardware Options









rear port (RS 485, IEC 60870-5-103)474.00 €





24, 50BF



Software Options






Hardware Options








rear port (RS 485, IEC 60870-5-103)474.00 €



P633

40TE

84TE

84TE

P634

84TE

84TE



MiCOM Voltage and Frequency relay. Surface-/flush-mounting compact case, 2 binary inputs and 8 output relays, pin-terminals. (VT only model without CT inputs).

27, 47, 59, 81 1,902.00 €







MiCOM Numerical voltage and frequency relay. With 4-pole VT inputs only, 4 binary inputs and 8 output relays, wall or flush mounting case.

27, 47, 59, 81


2,500.00 €


2,579.00 €

Ring terminal model 2,726.00 € Software OptionsDefault Software Version - Customer specified and / or customised version Please contact Schneider Electric On RequestProduct Specific OptionsHigher switching thresholds on binary inputs 112.00 € Detachable HMI (DHMI) 562.00 € First control-I/O module (with 6 binary inputs and 6 binary outputs) provided with high speed high break contacts (1-pole)

189.00 €


378.00 €

Hardware OptionsModule with 6 binary inputs and 3 output relays 326.00 € Module with 6 binary inputs and 6 output relays 521.00 € Module with 6 binary inputs and 8 output relays 415.00 € Module with 6 output relays 209.00 € Module with 4 high speed high break contacts 313.00 € Binary module with 24 binary inputs 736.00 € Analogue I/O module 492.00 € Communications Options



IEC 61850 Ethernet communications (Single Port) 495.00 €



VOLTAGE & FREQUENCYP130C

Compact

24TE

40TE

40TE

84TE

P132

24TE



Overcurrent protection for railway systems, basic complement 4 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display. (Alternative: P120 for 50 and 60Hz systems)

50, 51, 27, 59, 50BF

basic device, pin-terminal connection On Request


basic device, ring-terminal connection On Request

Software Options





VT input for directionalising 27, 67, 59 On Request

Hardware Options








rear port (RS 485, IEC 60870-5-103)474.00 €



Railway distance (catenary) protection, 16 2/3 Hz, basic complement 4 binary inputs and 8 output relays, 6 function keys, surface-mounting or flush-mounting, local control panel with text display,

21N, 50N, 51N, 50/27, 49, 27, 59, 50BF

basic device, pin-terminal connection 40TE On Request


basic device, ring-terminal connection 84TE On Request

Software Options






Hardware Options








rear port (RS 485, IEC 60870-5-103)474.00 €




P138

40TE

84TE

84TE

RAILWAY OVERCURRENT

RAILWAY DISTANCEP436



Railway distance (catenary) protection, 25/50/60 Hz, basic complement 4 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display,

21N, 50N, 51N, 50/27, 49, 27, 59, 50BF

Ring terminals on ac measurements inputs (heavy duty terminal block), pin-terminals on binary I/O

40TE On Request


basic device, ring-terminal connection 84TE On Request

Software Options



Product Specific OptionsAdditional DSP board required to support DELTA high impedance protection feature, and continous harmonic (2nd, 3rd, 5th) calculation.

338.00 €



Hardware Options








rear port (RS 485, IEC 60870-5-103)474.00 €




Transformer differential protection for railway systems, basic complement 4 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display,

87, 50, 51, 49, 27, 59, 50BF


basic device, ring-terminal connection On Request

Software Options





Hardware Options








rear port (RS 485, IEC 60870-5-103)474.00 €



P438

RAILWAY TRANSFORMERP638

84TE

84TE



MiCOM Px40 Series


MiCOM Feeder Management Relay.

27, 32, 37N, 37P,46, 47, 49, 50BF, 50N, 50P, 51N, 51P, 51V, 59, 59N,

64, 67N, 67W, 81U, 81O, 81R, 81RF, 81RAV

8 opto inputs and 7 output relay 40TE 2,670.00 € 8 opto inputs and 8 output relay 40TE 2,699.00 € P141 PLATFORM - default supply L

Product Platforms L or J (Product options will vary depending on the Hardware platform and the Software Version selected)

Software Options




IRIG-B Input 183.00 €

Fibre Optic Convertor 210.00 €

IRIG-B Input and Fibre Optic Convertor 277.00 €

2nd rear comms without IRIG-B (* see note) 482.00 €

2nd rear comms with IRIG-B (* see note) 668.00 €

Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €

Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €

Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €

Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)

655.00 €

Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)

765.00 €


800.00 €


910.00 €

* Note: When the 2nd rear comms option is selected, this board also offers InterMiCOM relay - relay signalling ** Note: Please check avalibility and delivert time before any order in 2015

MiCOM Feeder Management with auto-reclose. 27, 32, 37N, 37P,46, 47, 49, 50BF, 50N, 50P, 51N, 51P, 51V, 59, 59N, 64, 67N, 67W, 79, 81U, 81O, 81R,

81RF, 81RAV8 opto inputs and 7 output contacts 40TE 3,541.00 €

P142 PLATFORM - default supply L


Software Options



Hardware Options

One additional card slot is available, to boost I/O available (each card fitted adds 8I, or 7O, or 4I+4O, or 4HSHB).

8 opto inputs 279.00 €

7 output contacts 183.00 €

4 opto inputs + 4 output contacts 288.00 €

4 HSHB contacts (High Break Contacts) 309.00 €





2nd rear comms without IRIG-B (see note) 482.00 €

2nd rear comms with IRIG-B (see note) 668.00 €




Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 €

Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)

655.00 €


765.00 €



800.00 €


910.00 €


INTEGRATED FEEDER MANAGEMENTP141

P142



MiCOM Feeder Management with auto-reclose and check synchronising.

25, 27, 32, 37N, 37P,46, 47, 49, 50BF, 50N, 50P, 51N, 51P, 51V, 59, 59N, 64, 67N, 67W, 79, 81U, 81O,

81R, 81RF, 81RAV16 opto inputs and 14 output contacts 60TE 3,975.00 €

32 opto inputs and 32 output contacts 80TE 4,956.00 €



Software Options



Hardware Options

Two additional card slots are available in 60TE Model, to boost I/O available (each card fitted adds 8I, or 8O, or 4HSHB).





IRIG-B Input (modulated) 183.00 €


IRIG-B Input (modulated) and Fibre Optic Convertor 277.00 €


2nd rear comms with modulated IRIG-B (see note) 668.00 €






655.00 €


765.00 €



800.00 €


910.00 €


MiCOM Feeder Management with auto-reclose and check synchronising, plus multiple function keys. (See P891 where an additional direct trip/close function is required along with this relay).

25, 27, 32, 37N, 37P,46, 47, 49, 50BF, 50N, 50P, 51N, 51P, 51V, 59, 59N, 64, 67N, 67W, 79, 81U, 81O,

81R, 81RF, 81RAV12 opto inputs and 12 output relays base model (Model B, with ANSI Symbol Terminal Lablling) 60TE 4,342.00 €

16 opto inputs and 16 output relays model (Model A). 60TE 4,572.00 €

P145 PLATFORM - default supply M

Product Platform M or J (Product options will vary depending on the Hardware platform and the Software Version selected)

Software Options



Hardware Options

Two additional card slots are available in 60TE Model, to boost I/O available (each card fitted adds 8I, or 8O, or 4HSHB).









2nd rear comms with IRIG-B (see note) 668.00 €






655.00 €


765.00 €



800.00 €


910.00 €


P143

P145



MiCOM Universal Motor Management for synchronous and induction motors 14, 26, 27, 27LV, 32N, 37, 38, 46,

47, 48, 49, 49T, 50, 50BF, 51, 50N, 51N, 50S, 51LR, 55, 59, 59N, 64N,

66, 67N, 81U, 86

8 opto inputs and 7output contacts 40TE 2,609.00 €

P241 PLATFORM - default supply J

Product Plaforms J (Product options will vary depending on the Hardware platform and the Software Version selected)

Software Options




CLIO 493.00 €

RTD 502.00 €

Hardware Options

12 opto inputs, 11 contacts (addition 4 inputs + 4 outputs) 288.00 €

Communication Options




2nd rear comms without IRIG-B 482.00 €

2nd rear comms with modulated IRIG-B 668.00 €






655.00 €


765.00 €



800.00 €


910.00 €

** Note: Please check avalibility and delivert time before any order in 2015

MiCOM Universal Motor Management for synchronous and induction motors14, 26, 27, 27LV, 32N, 37, 38, 46,

47, 48, 49, 49T, 50, 50BF, 51, 50N, 51N, 50S, 51LR, 55, 59, 59N, 64N,

66, 67N, 81U, 86


P242 PLATFORM - default supply K

Product Plaforms K (Product options will vary depending on the Hardware platform and the Software Version selected)

Software Options




CLIO 493.00 €

RTD 502.00 €

CLIO and RTD 996.00 €












655.00 €


765.00 €



800.00 €


910.00 €


INTEGRATED MOTOR MANAGEMENTP241

P242



MiCOM Universal Motor Management with motor différential protection for synchronous and induction motors14, 26, 27, 27LV, 32N, 37, 38, 46,

47, 48, 49, 49T, 50, 50BF, 51, 50N, 51N, 50S, 51LR, 55, 59, 59N, 64N,

66, 67N, 81U, 87M, 86




Software Options




CLIO 493.00 €

RTD 502.00 €













655.00 €


765.00 €



800.00 €


910.00 €


MiCOM Interconnection Protection, with CT and VT supervision, voltage vector shift and rate of change of frequency monitoring. 27, 32/32R, 50/50N/50P/50BF, 51/51N/51P, 52, 59/59N, 64,

67/67N, 81O/81U/81R, 49, 46, 47

Basic device for 40TE with 8 opto inputs and 7 output contacts 40TE 4,002.00 €




Software Options

Default Software Version 3X (except 7X) -

Dynamic Line Thermal Protection Software - version 7X 49DL 1,051.00 €


Hardware Options

Note: For 40TE case, 1 additional card slot is available for I/O extension (8DI, 7DO, 4DI+4DO or 4HB board) or adding the CLIO board

8DI board 40TE 279.00 €

7DO board 40TE 183.00 €

4DI +4DO board 40TE 288.00 €

4 HSHB board 40TE 309.00 €

CLIO 40TE 493.00 €

Note: For 60TE case, 1 additional card slot is available for I/O extension (8DI, 8DO, 4HB board) or adding the CLIO board

8DI board 60TE 279.00 € 8DO board 60TE 211.00 € 4 HSHB board 60TE 309.00 € CLIO + 4HSHB (delta price for 1 4HSHB board1 instead of 1 8DO board) 60TE 663.00 € Communication Options










655.00 €


765.00 €


800.00 €


910.00 €


Please contact Schneider Electric

P243

INTERCONNECTION / LOSS OF MAINSP341



MiCOM Generator Protection , with CT and VT supervision and optional temperature monitoring. 21, 24, 27, 32L/32R/32O,50/50N, 50BF, 51/51N/51V, 40, 46, 47, 59,

64, 81O/81U, 81AB, 49





Software Options



Hardware Options

Note: For 40TE case, 1 additional card slot is available for I/O extension (8DI, 7DO, 4DI+4DO or 4HB board) or CLIO board or RTD board

8DI board 40TE 279.00 €

7DO board 40TE 183.00 €

4DI +4DO board 40TE 288.00 €

4 HSHB board 40TE 309.00 €

CLIO 40TE 493.00 €

RTD 40TE 502.00 €

Note: For 60TE case, 2 additional card slots are available for I/O extension (8DI, 8DO, 4HB board) or RTD or CLIO board

8DI board 60TE 279.00 € 8DO board 60TE 211.00 € CLIO 60TE 493.00 €

RTD 60TE 502.00 €

CLIO and RTD 60TE 996.00 €

8DI board and RTD board 60TE 782.00 €

8DO board and RTD board 60TE 714.00 € 4 HSHB board 60TE 309.00 € RTD + 4HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 60TE 671.00 € CLIO + 4HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 60TE 663.00 € RTD + CLIO + 4HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 60TE 1,165.00 € Communication Options











655.00 €


765.00 €



800.00 €


910.00 €


INTEGRATED GENERATOR MANAGEMENTP342



MiCOM Generator Protection with CT and VT supervision, optional temperature monitoring and with differential, 100% stator earth fault protection and pole slipping protection.

21, 24, 27/27TN, 32L/32R/32O, 50/50N, 50BF, 51/51N/51V, 40, 46,

47, 59/59N/59TN, 64, 81O/81U/81AB, 87G, 78, 49




Product Plaforms K or J (Product options will vary depending on the Hardware platform and the Software Version selected)

Software Options



Hardware Options

Note: For 60TE case, 1 additional card slot is available for I/O extension (8DI, 8DO, 4HB board) or CLIO board or RTD board

8DI board 279.00 €

8DO board 211.00 €

4 HSHB board 309.00 €

4 HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 170.00 €

CLIO 493.00 €

RTD 502.00 €

CLIO board and 4HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 663.00 €

Note: For 80TE case, 2 additional card slots are available for I/O extension (8DI, 8DO, 4HB board) or RTD or CLIO board

8DI board 279.00 € 8DO board 211.00 € CLIO 493.00 €

RTD 502.00 €


8DI board and RTD board 782.00 €

8DO board and RTD board 714.00 € 8DI + RTD + CLIO replace 8DO board 1,064.00 € 8DO + RTD + CLIO replace 8DI board 928.00 € 8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 199.00 € RTD + 8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 700.00 € CLIO + 8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 692.00 € RTD + CLIO + 8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 1,195.00 € Communication Options











655.00 €


765.00 €



800.00 €


910.00 €


P343

60TE

80TE



As per P343, with an additional VT input for a second neutral displacement function (59N),

21, 24, 27/27TN, 32L/32R/32O, 50/50N, 50BF, 51/51N/51V, 40, 46,

47, 59/59N/59TN, 64, 81O/81U/81AB, 87G, 78, 49




Software Options



Hardware Options

Note: 2 additional card slots are available for I/O extension (8DI, 8DOor 4HB board) or RTD or CLIO board

8DI board 279.00 €

8DO board 211.00 €

CLIO 493.00 €

RTD 502.00 €

RTD + CLIO 996.00 €


8DO board and RTD board 714.00 €

8DI + RTD + CLIO replace 8DO board 1,064.00 €

8DO + RTD + CLIO replace 8DI board 928.00 €

4 HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 170.00 € RTD + 4HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 671.00 € CLIO + 4HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 663.00 € RTD + CLIO + 4HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 1,165.00 € 8 HSHB contacts (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 199.00 € RTD + 8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 700.00 € CLIO + 8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 692.00 € RTD + CLIO +8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 1,195.00 € Communication Options











655.00 €


765.00 €


800.00 €


910.00 €


P344



As per P344, plus 100% stator earth fault by injection achieved using special accessories below, 24 opto inputs and 24 output relays.

21, 24, 27/27TN, 32L/32R/32O, 50/50N, 50BF, 51/51N/51V, 40, 46,

47, 59/59N/59TN, 64, 81O/81U/81AB, 87G, 78, 49

Basic device with 24 opto inputs and 24 output contacts 80TE 11,153.00 €



Software Options



Hardware Options

Note: 2 additional card slots are available for I/O extension (8DI, 8DOor 4HB board) or RTD or CLIO board

8DI board 279.00 €

8DO board 211.00 €

CLIO 493.00 €

RTD 502.00 €

RTD + CLIO 996.00 €


8DO board and RTD board 714.00 €

8DI + RTD + CLIO replace 8DO board 1,064.00 €

8DO + RTD + CLIO replace 8DI board 928.00 €

4 HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 170.00 € RTD + 4HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 671.00 € CLIO + 4HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 663.00 € RTD + CLIO + 4HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 1,165.00 € 8 HSHB contacts (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 199.00 € RTD + 8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 700.00 € CLIO + 8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 692.00 € RTD + CLIO +8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 1,195.00 € Communication Options










655.00 €


765.00 €



800.00 €


910.00 €


To achieve 100% stator earth fault by injection principle:20Hz Bandpass filter On Request20Hz Generator On Request

Tripping CT 400/5A On Request

Accessory for use with P342, P343, P344, and P345 for rotor earth fault protection. (Select CLIO card option in the main relay to allow connection in the scheme).

64R 1,895.00 €

MiCOM Distance Protection; with 3 phase tripping and 3 phase auto-reclose. 21G, 21P, 25, 27, 46, 46BC, 50,

50BF, 51, 51N, 51FF, 59, 67, 67N, 78, 79, 85

8 inputs and 14 outputs without check synchronising 40TE 6,337.00 €

8 inputs and 14 outputs with check synchronising 40TE 6,800.00 €


Product Platforms J (Product options will vary depending on the Hardware platform and the Software Version selected)

Software Options



P441

P345

P345 ACCESSORIES

ROTOR EARTH FAULTP391

LINE / CABLE DISTANCE



MiCOM Distance Protection; with 1/3 phase tripping, 1/3 phase auto-reclose & check synchronising 21G, 21P, 25, 27, 46, 46BC, 50,

50BF, 51, 51N, 51FF, 59, 67, 67N, 78, 79, 85

16 inputs and 21 outputs 60TE 8,553.00 €



Software Options



Hardware Options 4 HSHB (delta price for 1 4HSHB board instead of 1 7DO board) 170.00 € Communications Options (P442)

IRIG-B Input (modulated only) 183.00 €




2nd rear comms with modulated IRIG-B (* see note) 668.00 €





655.00 €


765.00 €


800.00 €


910.00 €


MiCOMho Distance Protection; with 1/3 phase tripping and 1/3 phase auto-reclose. Offers mho, quadrilateral, and directional comparison elements. Fast subcycle tripping for all applications including EHV.

21G, 21P, 25, 27, 46, 46BC, 49, 50, 50BF, 51, 51N, 51FF, 59, 59N, 67,

67N, 68, 78, 79, 85, 87DC, 81U/O/R

Relay with 16 opto inputs and 24 contacts, ring terminals 80TE 9,450.00 €




Product Plaforms M, K or J (Product options will vary depending on the Hardware platform and the Software Version selected)

Software Options



Hardware Options (NOT APPLICABLE 32 Opto Inputs / 3 2 Output contacts)4 HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 170.00 € 8 HSHB (delta price for 2 4HSHB boards instead of 2 8DO boards) 338.00 € InterMiCOM64 850nm teleprotection, 2 channel 483.00 €

InterMiCOM64 with single 1300nm channel only 1,983.00 €

InterMiCOM64 with one 850nm and one 1300nm channel for 3-ended or dual redundant schemes. 2,463.00 €

InterMiCOM64 with dual 1300nm channel for 3-ended or dual redundant schemes. 3,486.00 € Note: InterMiCOM64 850nm can interface directly to IEEE C37.94 multiplexers, or to G.703 (P591), V.35 (P592), or X.21 (P593). Details of P59x interfaces are shown in the current differential section.











655.00 €


765.00 €


800.00 €


910.00 €


P442

P443



MiCOM Distance Protection; with 1/3 phase tripping, 1/3 phase auto-reclose and check synchronising 21G, 21P, 25, 27, 46, 46BC, 50,

50BF, 51, 51N, 51FF, 59, 67, 67N, 78, 79, 85




Product Platforms K or J (Product options will vary depending on the Hardware platform and the Software Version selected)

Software Options



Hardware Options12 HSHB contacts (delta price for 3 4HSHB boards instead of 3 8DO boards) 508.00 € IEC61850-9.2 LE Process Bus connection to Merging Unit 578.00 €

Communications Options (P444)










655.00 €


765.00 €


800.00 €


910.00 €


MiCOMho Distance Protection; with 3 phase tripping and 3 phase auto-reclose. Offers mho (phase/ground), and quadrilateral (ground) elements.

21G, 21P, 25, 27, 46, 46BC, 50, 50BF, 51, 51N, 51FF, 59, 59N, 67,

67N, 78, 79, 858 opto inputs and 8 contacts, ring terminals 40TE 6,299.00 €

12 opto inputs and 12 contacts, ring terminals 60TE 7,289.00 €

16 opto inputs and 16 contacts, ring terminals 60TE 7,492.00 €

16 opto inputs, 8 contacts, 4 high break, ring terminals 60TE 7,661.00 €


Product Plaforms L or J (Product options will vary depending on the Hardware platform and the Software Version selected)

Software Options



Hardware Options

InterMiCOM64 850nm teleprotection, 2 channel 483.00 €




Interface Options

1300nm single mode optical interface (per channel) 1,302.00 €

1300nm multi mode optical interface (per channel) 1,302.00 €

1550nm single mode optical interface (per channel) 2,802.00 € Additional 850nm channel fitted along with any of the three variants above, to allow dual redundant channel communications, with mixed direct fibre and MUX comms.

188.00 €

Note: (850nm interface direct to IEEE C37.94 multiplexer provided as a standard setting option in 850nm model, at no extra cost)











655.00 €


765.00 €


800.00 €


910.00 €


P444

P445



MiCOMho Distance Protection; with 1/3 phase tripping and 1/3 phase auto-reclose. Offers mho, quadrilateral, and directional comparison elements. Fast subcycle tripping for all applications including EHV. Dual breaker model with 2 x 3 phase CT inputs, dual check synchronism, and leader follower reclose control.

21G, 21P, 25-2, 27, 46, 46BC, 49, 50, 50BF-2, 51, 51N, 51FF, 59, 59N, 67, 67N, 68, 78, 79-2, 85,

87DC, 81U/O/R24 opto inputs and 32 contacts, ring terminals 80TE 10,839.00 €




Product Platforms M or K (Product options will vary depending on the Hardware platform and the Software Version selected)

Hardware Options

InterMiCOM64 850nm teleprotection, 2 channel 483.00 €














655.00 €


765.00 €


800.00 €


910.00 €


MiCOM Current Differential Protection with overcurrent backup protection. Uses 850nm optical interface 46BC, 49, 50, 51P/51N, 87L 40TE 6,664.00 €



Software Options



Interface Options




188.00 €








MiCOM Current Differential Protection with overcurrent backup protection and 3 phase autoreclose. Uses 850nm optical interface 46BC, 49, 50, 51P/51N, 79, 87L 60TE 7,672.00 €



Software Options



Interface Options




188.00 €








LINE / CABLE CURRENT DIFFERENTIALP541

P542

P446



MiCOM Current Differential Protection with distance backup protection and 1/3 phase auto-reclose. Uses 850nm optical interfaceNote - the Prices for models P543 to P546 above are for the base model with no distance protection, see Software options for addiional Distance Price

21G, 21P, 25, 27, 46, 46BC, 49, 50, 50BF, 51, 51N, 51FF, 59, 59N, 67, 67N, 68, 78, 79, 85, 87L, 81U/O/R

16 optical inputs and 14 contact outputs. 60TE 9,286.00 €


Product Platforms M, K or J (Product options will vary depending on the Hardware platform and the Software Version selected)

Software Options


Distance Protection Software 1,048.00 €


Hardware Options4 HSHB Contacts (delta price for 1 4HSHB board instead of 1 7DO board) 170.00 € Interface Options (P543)




188.00 €












655.00 €


765.00 €


800.00 €


910.00 €


MiCOM Current Differential Protection with distance backup protection suitable for breaker and a half configurations. Uses 850nm optical interfaceNote - the Prices for models P543 to P546 above are for the base model with no distance protection, see Software options for addiional Distance Price

21G, 21P, 25-2, 27, 46, 46BC, 49, 50, 50BF-2, 51, 51N, 51FF, 59,

59N, 67, 67N, 68, 78, 79-2, 85, 87L, 81U/O/R




Software Options




Hardware Options4 HSHB Contacts (delta price for 1 4HSHB board instead of 1 7DO board) 170.00 € Interface Options




188.00 €












655.00 €


765.00 €


800.00 €


910.00 €


P543

P544



MiCOM Current Differential Protection with distance backup protection and 1/3 phase auto-reclose. Uses 850nm optical interfaceNote - the Prices for models P543 to P546 above are for the base model with no distance protection, see Software options for addiional Distance Price

21G, 21P, 25, 27, 46, 46BC, 49, 50, 50BF, 51, 51N, 51FF, 59, 59N, 67, 67N, 68, 78, 79, 85, 87L, 81U/O/R

Basic device with 24 opto inputs and 32 contact outputs. 80TE 10,043.00 €



Software Options




Hardware Options

Note: 1 additional card slot available for DI/DO ex tension (8DI or HSHB contacts)

8DI board 279.00 € 8 HSHB Contacts (delta price for 2 4HSHB boards instead of 2 8DO boards) 338.00 € Interface Options




188.00 €












655.00 €


765.00 €


800.00 €


910.00 €


MiCOM Current Differential Protection with distance backup protection suitable for breaker and a half configurations. Uses 850nm optical interfaceNote - the Prices for models P543 to P546 above are for the base model with no distance protection, see Software options for addiional Distance Price

21G, 21P, 25-2, 27, 46, 46BC, 49, 50, 50BF-2, 51, 51N, 51FF, 59,

59N, 67, 67N, 68, 78, 79-2, 85, 87L, 81U/O/R




Software Options




Hardware Options8 HSHB contacts (delta price for 2 4HSHB boards instead of 2 8DO boards) 338.00 € 12 HSHB contacts (delta price for 3 4HSHB boards instead of 3 8DO boards) 508.00 € Interface Options




188.00 €












655.00 €


765.00 €


800.00 €


910.00 €


P545

P546



P591 G703 Interface Module for the P540 range, P521, P443 & P445. 1,298.00 €

P593 X21 Interface Module for the P540 range, P521, P443 & P445. 1,582.00 €

P594 High accuracy GPS synchronising module. Also used with P543 - P546 for unequal propogation delay SONET/SDH communications. New enhanced model with IRIG-B, pulse and fibre outputs for use as the single substation time reference.

P594 GPS module only 2,186.00 €

25 meter cable, antenna and surge arrester 986.00 €

50 meter cable, antenna, surge arrester and amplifier 1,586.00 €

P595 Interface Device 2,020.00 €

P-2M-LXA 850nm Multi-mode MICOM G703 Optic/Electric Interface Unit for the P540 range, P521, P443, P445 & P446. 19", 1U rack 1,629.00 €

P-2M-LXB 1300nm Single mode MICOM G703 Optic/Electric Interface Unit for the P540 range, P521, P443, P445 & P446. 19", 1U rack 2,029.00 €

MiCOM two ended line unit protection with overcurrent backup, CT only model.Must be used with approved power line carrier equipment (Available in English and Russian only)

46BC, 50/51P, 50/51N, 50BF, 49, 87PC

with 8 binary inputs, and 8 output relays 40TE 7,426.00 €



Software Options









MiCOM 2 or 3 ended line unit protection, enhanced model with CT and VT inputs, voltage compensation, and subcycle distance elements.Must be used with approved power line carrier equipment (Available in English and Russian only)

21G, 21P, 25, 27, 46, 46BC, 49, 50, 50BF, 51, 51N, 51FF, 59, 59N, 67,

67N, 68, 78, 79, 85, 87PC, 81U/O/R





Software Options



Hardware Options4 HSHB Contacts (delta price for 1 4HSHB board instead of 2 8DO board) 170.00 € 8 HSHB Contacts (delta price for 2 4HSHB boards instead of 2 8DO boards) 338.00 €











655.00 €


765.00 €


800.00 €


910.00 €


P59x suffix B

P-2M-L

PHASE COMPARISONP547 40TE

P547 80TE



Transformer differential protection for 2 winding transformers. Two sets of bias inputs, plus restricted earth fault protection for each winding. With single phase VT input for overflux functionality.

87, 87REF/67N, 46, 50P, 50N/G, 51P, 51N/G, 49, 81O, 81U, 81R, 24,

LoL, CTSbasic device with 8 opto inputs and 8 contacts 40TE 4,296.00 €



Software Options



Hardware Options

Additional 1-Phase VT input module with negative sequence overvoltage and voltage controlled overcurrent 47, 51V 450.00 €

Note: 1 additional card slot is available for extension DI/DO board or 4HB or RTD or CLIO board

RTD 502.00 €

CLIO 493.00 €

4DI + 4DO board 288.00 €

4 HSHB Outputs 309.00 €










Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note)

655.00 €

Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note)

765.00 €

Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security(* see note)

800.00 €


910.00 €

* Note: Please check avalibility and delivert time before any order in 2015

Transformer differential protection for 2 or 3 winding transformers. Three sets of bias inputs, plus restricted earth fault protection for each winding. With single phase VT input for overflux functionality.

87, 87REF/67N, 46, 50P, 50N/G, 51P, 51N/G, 49, 81O, 81U, 81R, 24,




Software Options



Hardware Options

Additional 3-Phase VT input module with directionalising for overcurrent, voltage controlled overcurrent and negative sequence overvoltage27, 59, 59N, 67, 67N, 46/67Q, 47,

51V562.00 €

Note: 1 additional card slot is available for extension DI/DO board or 4HB or RTD or CLIO board

RTD 502.00 €

CLIO 493.00 €

8 Inputs 279.00 €

8 ouputs 211.00 €

4 HSHB Outputs 309.00 €











655.00 €


765.00 €


800.00 €


910.00 €


P643

INTEGRATED TRANSFORMER MANAGEMENTP642



Transformer differential protection for 2 or 3 winding transformers. Five sets of bias inputs, plus restricted earth fault protection for each winding. With single phase VT input for overflux functionality.

87, 87REF/67N, 46, 50P, 50N/G, 51P, 51N/G, 49, 81O, 81U, 81R, 24,


basic device in larger case with 24 opto inputs and 24 contacts 80TE 6,523.00 €



Software Options



Hardware Options

Additional 3-Phase VT input module with directionalising for overcurrent, voltage controlled overcurrent and negative sequence overvoltage27, 59, 59N, 67, 67N, 46/67Q, 47,

51V60 or 80TE 562.00 €

Note: For 60TE case, 1 additional card slot is available for extension DI/DO board or 4HB or RTD or CLIO board

RTD 502.00 €

CLIO 493.00 €

8 inputs 279.00 €

8 outputs 211.00 €

4 HB contacts 309.00 €

Note: For 80TE case, 2 additional card slots are available for adding 1 of RTD or CLIO board, RTD+ CLIO boards

RTD 502.00 €

CLIO 493.00 €

RTD and CLIO 996.00 €

4 HSHB contacts (delta price for 1 4HSHB board instead of 1 8DO board) 170.00 €

RTD+4 HSHB contacts (delta price for 1 4HSHB board instead of 1 8DO board ) 671.00 €

CLIO+4 HSHB contacts (delta price for 1 4HSHB board instead of 1 8DO board ) 663.00 €

RTD +CLIO + 4 HSHB (delta price for 1 4HSHB board instead of 1 8DO board ) 1,165.00 €

8 HSHB contacts (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 199.00 €

RTD + 8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 700.00 €

CLIO + 8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 692.00 €

RTD + CLIO +8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 1,195.00 €











655.00 €


765.00 €


800.00 €


910.00 €


MiCOM Busbar Protection - Central Unit. Can be configured for up to 8 zones, with 8 digital inputs and 8 relay outputs - peripheral comms boards not included - max 7 boards (=28 peripheral units).

87, CTS 80TE On Request



Software Options



Hardware Options

Communication Board (use with 4 peripheral units) On RequestCommunication Board (use with 8 peripheral units) On RequestCommunication Board (use with 12 peripheral units) On RequestCommunication Board (use with 16 peripheral units) On RequestCommunication Board (use with 20 peripheral units) On RequestCommunication Board (use with 24 peripheral units) On RequestCommunication Board (use with 28 peripheral units) On RequestCommunications Options








655.00 €


765.00 €


800.00 €


910.00 €


P645

60TE only

80TE only

LOW IMPEDANCE BUSBAR DIFFERENTIALP741



MiCOM Busbar Protection - Peripheral Unit with 16 digital inputs, 8 relay outputs 50, 51, 50/51N, 50BF, 86 40TE On Request



MiCOM Busbar Protection - Peripheral Unit with 24 digital inputs, 16 relay outputs 50, 51, 50/51N, 50BF, 86 60TE On Request



Software Options



Hardware Options

Communication Board (use with 4 peripheral units) On Request






655.00 €


765.00 €


800.00 €


910.00 €


MiCOM Busbar Protection centralised in a single box solution, for up to 7 feeders and 4 zones. Use one relay per phase for up to 21 feeders.

87, 87CZ, 50DZ, CTS, 50/51, 50/51N, 50BF, 86, VTS

Basice device with 16 opto inputs and 16 contacts, ring terminals 80TE


Product Plaforms M or K (Product options will vary depending on the Hardware platform and the Software Version selected)

Hardware platform K: for up to 6 feeders and 2 zones. 8,130.00 €

Hardware platform M: for up to 6 feeders and 4 zones. 7,885.00 €

Hardware platform M: for up to 7 feeders and 4 zones. 8,516.00 €

Software Options



Hardware Options

Note: 4 additional card slots available for DI/DO extension

8 HSHB contacts (delta price for 2 4HSHB boards instead of 1 8DO board) 478.00 € 2 x 8DO boards 422.00 € 8DO board + 4HSHB board 520.00 € 8DI board + 8DO board 490.00 € 8DI board + 2×4HSHB boards 897.00 € 8DI board + 2×4HSHB boards and another 4HSHB board instead of 8DO board 1,067.00 € 2×8DI boards + 8DO board 770.00 € 2×8DI boards + 2×8DO boards 982.00 € 2×8DI boards + 2×4HSHB boards 1,176.00 € 3×8DI boards + 8DO board 1,050.00 € 2×8DI boards+ 2×8DO board 982.00 € Communications Options










655.00 €


765.00 €


800.00 €


910.00 €


P742

P743

P746



Transmission line terminal IED, with autoreclosing, check synchronism, breaker fail, fault locator, and directional overcurrent and earth protection. Used as breaker management terminal, Main 2 and/or backup protection. Single breaker model A.

25, 27, 46, 46BC, 49, 50, 50BF, 51, 51N, 51FF, 59, 59N, 67, 67N, 79,

81U/O/R60TE

16 opto inputs and 14 contacts. 60TE 4,600.00 €



Software Options


Hardware Options4 HSHB Contacts (delta price for 1 4HSHB board instead of 1 7DO board) 169.00 € Communications Options










655.00 €


765.00 €


800.00 €


910.00 €


Transmission line terminal IED, with autoreclosing, check synchronism, breaker fail, fault locator, and directional overcurrent and earth protection. Used as breaker management terminal, Main 2 and/or backup protection. Dual breaker model B, for leader-follower reclose schemes in breaker and a half and other dual CB applications. 24 opto inputs and 32 contacts.

25(x2), 27, 46, 46BC, 49, 50, 50BF, 51, 51N, 51FF, 59, 59N, 67, 67N,

79(x2), 81U/O/R24 opto inputs and 32 contacts. 80TE 5,738.00 €



Software Options


Hardware Options8 HSHB Contacts (delta price for 2 4HSHB boards instead of 2 8DO boards) 333.27 € 12 HSHB Contacts (delta price for 3 4HSHB boards instead of 2 8DO boards) 637.56 € Communications Options










655.00 €


765.00 €


800.00 €


910.00 €


Breaker Failure, AUTO RECLOSEP841-A

P841-B



MiCOM Digital Input & Output Extension device32 opto inputs and 16 output contacts

80TE 1,199.00 €

48 opto inputs and 24 output contacts 1,836.00 €

32 opto inputs and 14 output contacts, 16 high break contacts 2,328.00 €





Product Plaforms K (Product options will vary depending on the Hardware platform and the Software Version selected) Software OptionsDefault Software Version -


IRIG-B Input (modulated) 183.00 € Fibre Optic Convertor 210.00 € IRIG-B Input (modulated) and Fibre Optic Convertor 276.00 €



Ethernet Single Port (RJ45 and ST) without IEC 61850 294.00 €


Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B without IEC 61850 454.00 €




655.00 €


765.00 €


800.00 €


910.00 €


I/O Extension Device

See Integrated Feeder Management Section above

P849

AUTO RECLOSE & CHECK SYNCAUTO RECLOSEP142See Integrated Feeder Management Section above

P144See Integrated Feeder Management Section aboveCHECK SYNCHRONISINGP143See Integrated Feeder Management Section above

P145


SEPAM, MiCOM and VAMP Price Guide 2015 Section: 06 - VAMP series

VAMP Series

TYPE & DESCRIPTION Type Code PRICE

1/5A nominal current for overcurrent, 1/5 or 0.2/1 A nominal current for earth fault, 40..265 Vac/dc or 18..36 Vdc supply voltage, 2 DI (24 or 110 or 220 Vdc), 6 DO, USB front communication interface

Models

VAMP50 V50 3AAA 1AAA 1,061.00 €

Hardware Options

1x mA output 60.00 €

I/O Card, 4 digital inputs, 1 digital Output 150.00 €

Arc protection: 2 x sensor, BIO (= 1x fast DI (48 V dc max) 150.00 €

Arc protection: 3 x sensor, BIO (= 1x fast DI (+48 Vdc max) and 1x fast DO (+30 Vdc if activ e) 173.00 €

Communications Options Last two digits of order code

RS 232 interface LA 98.00 €

RS 485 interface BA 128.00 €

Plastic/Plastic fibre interface DA 236.00 €

Glass/Glass fibre interface EA 284.00 €

Plastic/Glass fibre interface FA 284.00 €

Glass/Plastic fibre interface GA 284.00 €

Ethernet RJ45 10 Mbps IEC 61850 interface and RS232 LE 218.00 €

Ethernet LC single fibre 100 Mbps IEC 61850 interface and RS232 LG 268.00 €

Ethernet RJ45 10 Mbps IEC 61850 interface and RS485 BE 248.00 €

Ethernet LC single fibre 100 Mbps IEC 61850 interface and RS485 BG 298.00 €

Profibus Interface PA 486.00 €

IRIG-B time synchronisation input and RS232 interface LB 148.00 €

Glass Fibre optic interface for VIO RTD module and RS232 interface LC 173.00 €

IRIG-B time synchronisation input and RS485 interface BB 178.00 €

Glass Fibre optic interface for VIO RTD module and RS485 interface BC 181.00 €

Ethernet RJ45 double 100 Mbps IEC61850 interface SA 316.00 €

Ethernet ST double fibre 100 Mbps IEC 61850 interface *) RA 399.00 €

RS232 interface with ext I/O and IRIG B MA 188.00 €

RS232 interface with ext I/O and RTD interface (glass) MC 218.00 €

Ethernet RJ45 10 Mbps IEC61850 interface and RS232 with ext I/O and IRIG B ME 358.00 €

Ethernet LC single fibre 100 Mbps IEC61850 interface and RS232 with ext I/O and IRIG B MG 388.00 € *) Note: only available with 110Vac/dc or higher power supply

Case Options

Slim case - €

Draw-out case *) 250.00 €

*) Note:Please contact Schneider Electric before order

OVERCURRENTVAMP50 OVERCURRENT & EARTHFAULT WITH AUTORECLOSE



1/5A nominal current for overcurrent, 1/5 or 0.2/1 A nominal current for earth fault, 40..265 Vac/dc or 18..36 Vdc supply voltage, 2 DI (24 or 110 or 220 Vdc), 6 DO, USB front communication interface

Models

VAMP59 V59 3AAA 1ALA 2,659.00 €

Hardware Options





Communications module 1 Options Last 2 digits of order code

RS232 interface LA 98.00 €








Ethernet LC single fibre 100 Mbps IEC61850 interface and RS232 with ext I/O and IRIG B MG 388.00 €

Cables

RS232 converter cable for MOXA TCF90 VX048 52.00 €

RS232 converter cable for MOXA TCF142 VX062 52.00 €

RS232 converter cable for WESTERMO VX063 52.00 €

AccessoriesMOXA TCF-90-S-ST, RS232 to single mode fiber optic converter. Optic fiber connection ST type. Power supply from relay.

On Request

MOXA TCF-142-S-ST, RS232 to single mode fiber optic converter. Optic fiber connection ST type. Separate power supply needed

On Request

MOXA TCF-90-M-ST, RS232 to multi mode fiber optic converter. Optic fiber connection ST type. Power supply from relay.

On Request

MOXA TCF-142-M-ST, RS232 to multi mode fiber optic converter. Optic fiber connection ST type. Separate power supply needed

On Request

Westermo ODW-720-F1, base unit *) On Request

SLC20, max distance 20km Single mode fiber card, LC connector On Request




*) Note: This unit is allways needed and additional select one of the SLC cards depend on distance needed. Price consist of both unit together, e.g. ODW-710-F1 + SLC20 card

Case Options

Slim case - €



LINE DIFFERENTIAL VAMP59 Line Differential Relay

Please contact Schneider Electric



1/5A nominal current for overcurrent, 0.2/1/5 A nominal current for earth fault, 50-120 V nominal voltage, 19..265Vac/dc supply voltage, RS232 communication interface

Models

VAMP40 VAMP40 720.00 €

VAMP40 accessories

Arc interface module for VAMP40 (including connection cable to relay) VP 40 143.00 €

Optional Seal for IP54 VYX256A 40.00 €

19" rack mounting plate for VAMP 40 VYX 314 71.00 €

1/5A nominal current for overcurrent, 1/5 or 0.2/1 A nominal current for earth fault, 50-120 V nominal voltage, 40..265 Vac/dc or 18..36 Vdc supply voltage, 2 DI (24 or 110 or 220 Vdc), 6 DO, USB front communication interface

Models

VAMP52 V52 3AAA 1AAA 1,145.00 €

Hardware Options





Communications Options Last 2 digits of order code

RS 232 interface LA 98.00 €




Plastic/Glass fibre interface FA 284.00 €

Glass/Plastic fibre interface GA 284.00 €



Ethernet RJ45 10 Mbps IEC 61850 interface and RS485 BE 248.00 €

Ethernet LC single fibre 100 Mbps IEC 61850 interface and RS485 BG 298.00 €

Profibus Interface PA 486.00 €



IRIG-B time synchronisation input and RS485 interface BB 178.00 €

Glass Fibre optic interface for VIO RTD module and RS485 interface BC 181.00 €

Ethernet RJ45 double 100 Mbps IEC61850 interface SA 316.00 €

Ethernet ST double fibre 100 Mbps IEC 61850 interface *) RA 399.00 €




Ethernet LC single fibre 100 Mbps IEC61850 interface and RS232 with ext I/O and IRIG B MG 388.00 € *) Note: only available with 110Vac/dc or higher power supply

Case Options

Slim case - €



FEEDER - MOTOR - CAPACITORVAMP40 Feeder/Motor/Capacitor Protection Relay

VAMP52 FEEDER/MOTOR



1/5A nominal current for overcurrent and earth fault, 40..265Vac/dc supply voltage, TTL communication interface

Models

VAMP230 V230 3C7 AAE 2,299.00 €

Integrated Options

Plastic/Plastic fibre interface 224.00 €

Plastic/Glass, Glass/Plastic fibre interface 293.00 €

Glass/Glass - fibre interface 293.00 €

Profibus connection 346.00 €

RS 485 connection 180.00 €

4 pcs mA analogue outputs 150.00 €

IEC 61850 RJ-45 100 Mbps interface 399.00 €

LC 100 Mbps optic interface with IEC61850 446.00 €

2x100Mbps RJ45 interface with IEC61850 551.00 €

2x100Mbps LC optic interface with IEC61850 650.00 €


Arc connection 150.00 €

Optional I/O card, DI19 / DI20 150.00 €

IP54 class sealing 42.00 €

1/5A nominal current for overcurrent and earth fault, 40..265Vac/dc supply voltage, TTL communication interface

Models

VAMP255 V255 3C7 AAE 2,677.00 €

Integrated Options















1/5A nominal current for overcurrent and earth fault, 40..265Vac/dc supply voltage, without communication interface

Models

VAMP257 - 18 DIGITAL INPUTS, 9 DIGITAL OUTPUTS V257 3C6 ACA 3,027.00 €




TTL/RS 232 interface 164.00 €

RS 232 interface (RJ45) 164.00 €

Ethernet interface for Modbus/TCP and DNP, RJ 45 252.00 €

Ethernet interface for Modbus/TCP and DNP, fibre (ST connector) 280.00 €

IEC 61850 Interface, RJ 45 369.00 €

IEC 61850 Interface, fibre (ST connector) 400.00 €

RS 485 interface (2-wire) 180.00 €



Glass/Glass fibre interface 293.00 €

Glass/Plastic fibre interface 293.00 €

Plastic/Glass fibre interface 293.00 €

Glass fiber interface for RTD module 120.00 €





VAMP230 FEEDER/MOTOR/CAPACITOR

VAMP255 FEEDER/MOTOR/CAPACITOR

VAMP257 FEEDER/MOTOR



VAMP300 IED

Model

F = Feeder 1,711.00 €

M = Motor 1,948.00 €

including:

- Power Supply Voltage C or D

- Analog Measurememt Card A

- Display Type A

Supply Voltage

C = Power C 110 - 240 (80 .. 265Vac/dc, 5 x DO heavy duty, A1, SF)

D = Power D 24 - 48 (18 .. 60Vdc, 5 x DO heavy duty, A1, SF)

I/O card I/II/III/IV

B = 3BIO+2Arc (3 x BI/BO, 2 x Arc point sensor, T2, T3, T4) AVAILABLE FOR SLOT 2 ONLY 288.00 €

C = F2BIO+1Arc (Fibre 2 x BI/BO, 1 x Arc loop sensor, T2, T3, T4) AVAILABLE FOR SLOT 2 ONLY 300.00 €

D = 2IGBT (2 x IGBT High speed outputs) AVAILABLE FOR SLOT 5 ONLY 168.00 €

G = 6DI+4DO (6 x DI, 4 x DO) AVAILABLE FOR SLOT 2, 3, 4, 5 210.00 €

I = 10DI (10 x DI) AVAILABLE FOR SLOT 2, 3, 4, 5 185.00 €

Option card I

D = 4Arc (4 x Arc sensor) AVAILABLE FOR SLOT 6, 7 168.00 €

P = PP (Plastic / Plastic serial fibre) AVAILABLE FOR SLOT 6, 7 293.00 €

R = GG (Glass / Glass serial fibre) AVAILABLE FOR SLOT 6, 7 293.00 €

Analog measurement card

A = 3L+U+Io (5/1A) 50.00 €

B = 3L+4U+Io (5/1A) 150.00 €

C = 3L+4U+2Io (5+1A) 200.00 €

D = 3L+4U+2Io (1+0.2A) 200.00 €

Communication interface I

B = RS232 (RS232, IRIG-B) AVAILABLE FOR SLOT 9, 10 178.00 €

C = RS232+RJ (RS232, IRIG-B + Ethernet RJ-45 100 Mbs) AVAILABLE FOR SLOT 9 ONLY 274.00 €

D = RS232+LC (RS232, IRIG-B + Ethernet LC 100 Mbs) AVAILABLE FOR SLOT 9 ONLY 322.00 €

N = 2xRJ (Ethernet RJ 100 Mbs, RSTP) AVAILABLE FOR SLOT 9 ONLY 516.00 €

O = 2xLC (Ethernet LC 100 Mbs, RSTP) AVAILABLE FOR SLOT 9 ONLY 612.00 €

Display Type

A = 128 x 64 (128 x 64 LCD matrix) - €

B = 128 x 128 (128 x128 LCD matrix) - €

C = 128 x 128Ext (128 x 128 LCD matrix, detachable) 50.00 €

Line Manager

Line Manager with distance and differential protection, 1/5A nominal current for overcurrent and earth fault, 40..265Vac/dc supply voltage, without communication interface

Models

VAMP259 - 18 DIGITAL INPUTS, 9 DIGITAL OUTPUTS VAMP259 4C6 ACA 4,485.00 €




TTL/RS 232 interface 164.00 €

RS 232 interface (RJ45) 164.00 €

Ethernet interface for Modbus/TCP and DNP, RJ 45 252.00 €

Ethernet interface for Modbus/TCP and DNP, fibre (ST connector) 280.00 €

IEC 61850 Interface, RJ 45 369.00 €

IEC 61850 Interface, fibre (ST connector) 400.00 €




Glass/Glass fibre interface 293.00 €

Glass/Plastic fibre interface 293.00 €

Plastic/Glass fibre interface 293.00 €

Glass fiber interface for RTD module 120.00 €





VAMP 300 FEEDER/MOTOR

VAMP259 Line Manager



Differential Protection

1A/1A nominal current for HV/LV and 5A/5A nominal current for earth fault, 40..265Vac/dc supply voltage, TTL communication interface.

Models

VAMP265 - Differential Protection VAMP265 1A7 AAE 2,685.00 €

VAMP265 - Motor Differential Proection VAMP265 1A7 AAM 3,223.00 €

Integrated Options















Generator Protection

1A nominal current for overcurrent and 5A/5A nominal current for earth fault, 40..265Vac/dc supply voltage, TTL communication interface.

Models

VAMP210 - Generator Protection VAMP210 1A7 AAE 3,525.00 €

Integrated Options















VAMP210 Generator protection

VAMP265 Differential protection



50-120 V nominal voltage, 40..265 Vac/dc or 18..36 Vdc supply voltage, 2 DI (24 or 110 or 220 Vdc), 6 DO, USB front communication interface

Models

VAMP55 V55 3AAA 1AAA 1,181.00 €

Hardware Options

1mA output 60.00 €

IO Card, 4 digital inputs, 1 digital Output 150.00 €

Communications Options Last two digits of order codeRS 232 interface LA 98.00 €




Plastic/Glass fibre interface FA 284.00 € Glass/Plastic fibre interface GA 284.00 € Ethernet RJ45 10 Mbps IEC 61850 interface and RS232 LE 218.00 € Ethernet LC single fibre 100 Mbps IEC 61850 interface and RS232 LG 268.00 € Ethernet RJ45 10 Mbps IEC 61850 interface and RS485 BE 248.00 € Ethernet LC single fibre 100 Mbps IEC 61850 interface and RS485 BG 298.00 € Profibus Interface PA 486.00 € IRIG-B time synchronisation input and RS232 interface LB 148.00 € Glass Fibre optic interface for VIO RTD module and RS232 interface LC 173.00 € IRIG-B time synchronisation input and RS485 interface BB 178.00 € Glass Fibre optic interface for VIO RTD module and RS485 interface BC 181.00 € Ethernet RJ45 double 100 Mbps IEC61850 interface SA 316.00 € Ethernet ST double fibre 100 Mbps IEC 61850 interface *) RA 399.00 € RS232 interface with ext I/O and IRIG B MA 188.00 € RS232 interface with ext I/O and RTD interface (glass) MC 218.00 € Ethernet RJ45 10 Mbps IEC61850 interface and RS232 with ext I/O and IRIG B ME 358.00 € Ethernet LC single fibre 100 Mbps IEC61850 interface and RS232 with ext I/O and IRIG B MG 388.00 € *) Note: only available with 110Vac/dc or higher power supply

Case Options

Slim case - €

VAMP 11V IED

Model options

Model LVoltage and neutral displacement protection with under/ over voltage. 0BI/4BO

27, 59, 59N, 86 406.00 €

Model NVoltage and neutral displacement protection with under/ over voltage. 2BI/6BO; RS485 (Modbus/IEC103); USB 27, 59, 59N, 86

520.00 €

Model AVoltage and frequency protection with under/ over voltage, under/over frequency; 4BI/8BO; RS485 (Modbus/IEC103); USB 27, 27D, 47, 59, 59N, 81U, 81O

651.00 €

Accessories delicated for Vamp 11V


Front cover preventing from unauthorised access 61.00 €

VOLTAGE-FREQUENCYVAMP55 VOLTAGE/FREQUENCY

Vamp 11V - Voltage/Frequency Protection



Accessories & Cables *

Flush mounting, 200 series, 40mm VYX076 38.00 €



Flush mounting, 321 / 300 series, 45 mm VYX695 38.00 € Wall mounting frame for 50 series V50WAF 132.00 € Wall mounting frame for 200 series V200 WAF 112.00 €

RS 232 programming cable VX003-3 56.00 €

USB programming cable for VAMP 50-series VX052-3 30.00 € TTL/RS232 Converter Cable (for REMOTE port - (VPA 3 CG (Profibus) or VMA 3CG (RS-485))) VX007-F3 90.00 €

RS232 (option A) converter cable for MOXA TCF90 (remote port) VX048 52.00 €

Interface cable to VPA3CG for VAMP50 series VX054 52.00 €

RJ45 (option I) converter cable for MOXA TCF-90 (extension port) VX055 52.00 €

RJ45 (option I) converter cable for MOXA TCF-142-S-ST (extension port) VX056 52.00 €

USB-RS232 adapter 3P025 65.00 €

Profibus converter module (needs VX007-F3 cable) VPA 3 CG 256.00 €

Alarm panel (16 LEDs), only for VAMP 230/255 VAM 16D 256.00 €

12-channel external RTD input module, glass fiber interface to relay, 19-265 Vac/dc power supply VIO 12 AA 526.00 €

12-channel external RTD input module, RS 485 interface to relay, 19-265 Vac/dc power supply

VIO 12 AB 494.00 €

12-channel external RTD input module, 4mA inputs, PTC input, glass fiber interface to relay, 24 Vdc power supply VIO 12 AC 750.00 €

12-channel external RTD input module, 4mA inputs, PTC input, glass fiber interface to relay, 40-265Vac/dc power supply

VIO 12 AD 721.00 €

*) Note: not for Vamp 11V

ACCESSORIES

VIO EXTERNAL IO UNITS

FRAMES

CABLES


SEPAM, MiCOM and VAMP Price Guide 2015 Section: 07 - VAMP ARC

VAMP ARC Protection

TYPE & DESCRIPTION ANSI Type Code PRICE

19-265 Vdc / 40-265 Vac auxiliary supply, 4 arc sensor channels, 2 digital inputs, 2 trip contacts, 1 trip alarm contact, 1 trip signal (NC) and IRF contactModels

VAMP120 V120 459.00 €

Hardware Options

Installation kit for flush mounting VYX 293 36.00 €

VAMP 121 unitModelsVAMP121 V121 514.00 € VAMP121D V121D 542.00 € Hardware Options (only one option can be selected)- Phoenix MINI PS, or equilavent power unit 3P004 111.00 €

- Phoenix DEK REL alarm relay 3P007 25.00 €

VAMP 221 Central Unit

Models

VAMP 221 V221 3A3 AAA 2,188.00 €

VAMP 221 V221 4A3 AAA 2,360.00 €

Hardware Options (I/O unit)I/O unit for central unit, connection for 10 sensors and one pinch sensor. 3 trip contacts for selective tripping

VAM 12LSE 1,080.00 €

I/O unit for central unit, connection for 10 sensors and one pinch sensor VAM 10LSE 518.00 €

I/O unit for central unit, 3 fiber optic connections and one pinch sensor VAM 3LSE 534.00 €

I/O unit for central unit, 3 fiber optic connections and one pinch sensor, adjustable light sensitivity

VAM 3LXSE 621.00 €

I/O unit for central unit, 3 phase current measurement or 2 phase current + residual current measurement, 1 / 5 A

VAM 4CSE 710.00 €

Hardware Options (DOOR MOUNTED I/O)I/O unit for central unit, 3 phase current measurement or 2 phase current + residual current measurement, 1 / 5 A

VAM 4CDSE 739.00 €

I/O unit for central unit, connection for 10 sensors and one pinch sensor. 3 trip contacts for selective tripping

VAM 12LDSE 1,108.00 €

I/O unit for central unit, connection for 10 sensors and one pinch sensor VAM 10LDSE 548.00 €

ARC PROTECTIONVAMP120

VAMP121

VAMP221 CENTRAL UNIT




Models

VAMP 321 V321 - xAAAA AAAAA Ax 1,987.00 €

including:

- Power Supply Voltage A or B

- Analog Measurememt Card A

- Display Type A

Supply Voltage

A = Power A 110 - 240 (80 .. 265Vac/dc, T1, A1, SF) - €

B = Power B 24 - 48 (18 .. 60Vdc, T1, A1, SF) - €

I/O card I/II/III/IV

B = 3BIO+2Arc (3 x BI/BO, 2 x Arc point sensor, T2, T3, T4) AVAILABLE FOR SLOT 2 ONLY 288.00 €

C = F2BIO+1Arc (Fibre 2 x BI/BO, 1 x Arc loop sensor, T2, T3, T4) AVAILABLE FOR SLOT 2 ONLY 300.00 €

D = 2IGBT (2 x IGBT High speed outputs) AVAILABLE FOR SLOT 5 ONLY 168.00 €

G = 6DI+4DO (6 x DI, 4 x DO) AVAILABLE FOR SLOT 2, 3, 4, 5 210.00 €

I = 10DI (10 x DI) AVAILABLE FOR SLOT 2, 3, 4, 5 185.00 €

I/O Option card I/II

D = 4Arc (4 x Arc sensor) AVAILABLE FOR SLOT 6, 7 168.00 €

Communication interface I/II

B = RS232 (RS232, IRIG-B) AVAILABLE FOR SLOT 9, 10 178.00 €

C = RS232+RJ (RS232, IRIG-B + Ethernet RJ-45 100 Mbs) AVAILABLE FOR SLOT 9 ONLY 274.00 €

D = RS232+LC (RS232, IRIG-B + Ethernet LC 100 Mbs) AVAILABLE FOR SLOT 9 ONLY 322.00 €

N = 2xRJ (Ethernet RJ 100 Mbs, RSTP) AVAILABLE FOR SLOT 9 ONLY 516.00 €

O = 2xLC (Ethernet LC 100 Mbs, RSTP) AVAILABLE FOR SLOT 9 ONLY 612.00 €

Display Type

A = 128 x 64 (128 x 64 LCD matrix) - €

B = 128 x 128 (128 x128 LCD matrix) - €

C = 128 x 128Ext (128 x 128 LCD matrix, detachable) 50.00 €

Hardware Options (I/O unit)I/O unit for central unit, connection for 10 sensors and one pinch sensor. 3 trip contacts for selective tripping

VAM 12LSE 1,080.00 €

I/O unit for central unit, connection for 10 sensors and one pinch sensor VAM 10LSE 518.00 €

I/O unit for central unit, 3 fiber optic connections and one pinch sensor VAM 3LSE 534.00 €

I/O unit for central unit, 3 fiber optic connections and one pinch sensor, adjustable light sensitivity

VAM 3LXSE 621.00 €

I/O unit for central unit, 3 phase current measurement or 2 phase current + residual current measurement, 1 / 5 A

VAM 4CSE 710.00 €

Hardware Options (DOOR MOUNTED I/O)I/O unit for central unit, 3 phase current measurement or 2 phase current + residual current measurement, 1 / 5 A

VAM 4CDSE 739.00 €

I/O unit for central unit, connection for 10 sensors and one pinch sensor. 3 trip contacts for selective tripping

VAM 12LDSE 1,108.00 €

I/O unit for central unit, connection for 10 sensors and one pinch sensor VAM 10LDSE 548.00 €




Arc sensor with 6m connection cable VA 1 DA-6 62.00 €

Arc sensor with 6m connection cable, halogen free VA 1 DA6-HF 80.00 €

Arc sensor with 6m shielded connection cable VA 1 DA-6 74.00 €

Arc sensor with 20m connection cable VA 1 DA-20 71.00 €

Arc sensor with 20m connection cable, halogen free VA 1 DA20-HF 125.00 €

Arc sensor with 20m shielded connection cable VA 1 DA-20S 85.00 €

Pipe type Arc sensor with 6m connection cable VA 1 EH-6 111.00 €

Pipe type Arc sensor with 20m connection cable VA 1 EH-20 125.00 €

Pinch sensor VA 1 DP-5SE 125.00 €

Door connected pinch sensor (requires VX031-5 cable) VA 1 DP-5DSE 162.00 €

Cable for door connected duplexing pinch sensor (from VAM to door). VX031-5 66.00 €

Mounting plate for sensor, Z-shape VYX001 7.00 €

Mounting plate for sensor, L-shape VYX002 7.00 €

Fiber loop sensor, 1m ARC SLm-1 105.00 €









Fiber loop sensor, 45m ARC SLm-45 379.00 € Fiber loop sensor, 50m ARC SLm-50 403.00 € Fiber loop sensor, 60m ARC SLm-60 447.00 € Fiber loop sensor, 70m ARC SLm-70 507.00 € Fiber joint (only applicable for ARC SLm type of fiber) SLS-1 73.00 € Connection cable for slaves, length 1 - 9 m (available lengths 1,2,3,5,7 m) VX001-x 37.00 €

Connection cable for slaves, length 10 - 19 m (available lengths 10 m) VX001-x 52.00 €

Connection cable for slaves, length 20 - 30 m (available lengths 20, 30 m) VX001-x 73.00 €

Trip multiplier 4xNO and 4xNC VAMP 4RSE 369.00 €

SENSORS, CABLES AND TRIP RELAY EXTENSION UNITS

FIBRE SENSORS >8000 LUX ACTIVATION


price guide 2015 - schneider electric · pdf filep143 - micom feeder management ied with...

Documents