price list 2013 - saulėsbroliai.lt · price list 2013 possibility for visualisation on...
TRANSCRIPT
Certified byEN ISO 9001
www.fotolia.com
EnglishSolar
Log WoodWood Chip
Pellets
makes y
ou
in
dep
en
den
t
Price List 2013
Possibility for visualisation
on smartphones, PCs and tablets!
Storage technology Fresh water technology
High efficiencyObserve the ErP Directive
for wet rotor pumps in the heating sector.
SOLARFOCUS offershigh-efficiency pumps for all areas of
application.
Wet rotor pumps only whilst stocks last!
Biomass heatingSolar thermal systems
2
INNOVATION – ECONOMY –
QUALITY
SOLARFOCUS is shaping the future with products that
serve people and help the environment!
SOLARFOCUS is concerned with the development,
construction and distribution of solar and environmen-
tal technology products, with a focus on:
Biomass heating Solar thermal systems and Storage technology.
SOLARFOCUS is one step ahead: thanks to ongoing
research, development and cooperation with renowned
research institutes and partners, we have been able to
show dynamic company development. Our products are
only available from specialist dealers across Europe.
Ongoing training and seminars with our partners
ensure that plant operators receive project-oriented
advice and professional plant installation.
AWARDS such as:
l Young Entrepreneur’s Award
l Austrian Innovation Award 1995
l Golden „Pegasus“ Business Award
l Nominated for National Award for Innovation
l Voted Leading Upper Austrian Company for
Brilliant Business Ideas
l Upper Austrian Environmental Protection Award
l „Energy Genie“ Innovation Award 2003
l „Haustechnik Award“ HVAC Award 2004
l „Energy Genie“ Innovation Award 2011
l „FORLENER“ Italian Innovation Award for
energy-saving and eco-friendly technologies 2012
... and many more attest to our philosophy.
5-year warranty according to warranty pass
10-year warranty according to warranty pass
10-year warranty against condensation according to warrantypass
10-year warranty for the stainless steel burner according towarranty pass
10-year warranty for the stainless steel filling chamberaccording to warranty pass
Price list 2013
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
3
1
E-mail: [email protected] l www.solarfocus.eu
General
Solar technology Solar sets, collectors, installation accessories
Storage technologyStorage tanks
Fresh water and solar stratified charging modules
Pump sets
Solar controls
Heat exchangers/Solar pipe systems
Anti-freeze
Miscellaneous accessories for storage tanks
and solar
Biomass technology Pellet boiler – pellettop
Pellet boiler – octoplus
Log wood boiler – therminator II touch
Multifuel boiler – therminator II touch
Wood chip boiler – therminator II touch
Fresh water and solar stratified charging modules
ecomanager and ecomanager-touch
Pump sets – Heating systems – Accessories
Pellet stores
Control technology ecomanager-touch
Services Commissioning
makes you independent
Contents
Page ...... 10 - 35
Page .......... 4 - 9
Page ........36 - 45
Page ........46 - 51
Page ........52 - 53
Page ........54 - 55
Page ........56 - 59
Page ........60 - 61
Page ........62 - 63
Page.....109 - 114
Page ........64 - 71
Page ....... 72 - 77
Page ....... 84 - 93
Page ....... 78 - 83
Page ..... 94 - 101
Page ... 102 - 104
Page ... 105 - 108
Page.... 115 - 118
Page............. 119
4
Linda PanyDD: [email protected]
Alois RafetsederDD: [email protected]
Sascha RinnerbergerDD: [email protected]
Harald PfaffenederDD: [email protected]
Sigrid SteindlerDD: [email protected]
Marlene PfeifferDD: [email protected]
Dominic SteinerDD: [email protected]
Christian KerschbaummayrDD: [email protected]
Nicole HolzingerDD: [email protected]
Ronald Einzenberger/Management+43 676 8470 40 [email protected]
Kathrin MarchsteinerDD: [email protected]
Christiane Haider DD: [email protected]
Harald WöhryDD: [email protected]
Franz OberforsterDD: [email protected]
Carmen HafnerDD: [email protected]
Andreas SimetzbergerDD: [email protected]
Gerda RebhandlDD: [email protected]
Silvia Weindlmayer DD: [email protected]
Theresa HinterplattnerDD: [email protected]
Andrea KollerDD: [email protected]
Elisabeth GiererDD: [email protected]
Karlheinz KönigDD: [email protected]
Jolanta NowakDD: [email protected]
Scheduling/Logistics
Your contacts Tel.: +43 7252 50002-DD (direct dial) Fax: +43 7252 50002-10
Price list 2013
Marketing Exhibitions/Trade Shows Accounting
Technical Support/Solar and System Technology
Key Accounting
Sales Office/Exports Sales Office/Austria Billing/Exports
Research/Development Documentation
5
Gertraut PrüllerDD: [email protected]
Bettina Herber DD: [email protected]
Monika AhrerDD: [email protected]
Patrick KreuzrieglerDD: [email protected]
Jochen SchusterDD: [email protected]
Hannes SchallauerDD: [email protected]
Günter SchöpfDD: [email protected]
Martina Oezelt DD: [email protected]
Martin PostlmayrDD: [email protected]
Daniel Blatancic DD: [email protected]
Andreas DutzlerDD: [email protected]
Günther Asen
Christina HinterwirthDD: [email protected]
Christian StubauerDD: [email protected]
Rudolf GsöllpointnerDD: 34r. [email protected]
Johann HinterplattnerDD: [email protected]
Markus WimbergerDD: 699m.wimberger @solarfocus.at
Anja FroschauerDD: [email protected]
1
makes you independent
SOLARFOCUS provides you with a comprehensive network of highly specialised service technicians.Any servicing required is coordinated via the headquarters in St. Ulrich/Steyr.
Biomass Service Hotline
+43 7252 50002 4920
April to September
Monday to Friday, 07:00 - 17:00
Saturday, 08:00 - 17:00
Sunday and holidays, 08:00 - 13:00
October to March
Monday to Friday, 07:00 - 20:00
Saturday and Sunday, 08:00 - 20:00
E-mail:
Biomass: [email protected]
Solar: [email protected]
Programme Technology - Biomass Photovoltaics
Service Department - Solar
Service Department - Biomass
E-mail: [email protected] l www.solarfocus.e
IMPORTANT:
Any complaints or service calls
have to be agreed with the SOLARFOCUS
Service Department without exception.
The respective invoice or order number must
be quoted.
SOLARFOCUS will NOT compensate for any
reclamations or service calls without previous
written agreement!
6
0102 Data standard 5.0 Product Database
Data on CD
Solar thermal collectors for display
0111011201360114
836.-340.-650.-275.-
CPC full size exhibition collector - S1* 2400 x 1155 x 65 mmCPC small size sample collector - S1* 915 x 500 x 65 mmSunny-28 display collector* 2400 x 1155 x 85 mmSunny small size sample collector* 915 x 500 x 85 mm
* NOT FUNCTIONAL
Printed materials
Marketing materials
Solar and biomass
Print 0082Print 1110Print 0004Print 6005Print 6068Print 6036Print 6031Print 6300Print 0016
0142Print 0210
Solar technologyPlug-IN Buffer tankSolar sales manualpellettop
octoplus
therminator II touch - Log boilertherminator II touch - Multifuel boilertherminator II touch - Wood chip boilerBiomass sales manualRing binderMarketing materials catalogue
Price list 2013
7
1
3-5
4-6
2-4
150 m²
Approx.5.0 m²
300 litre
solar Buffer tank
Approx. 5.6 m²
300 - 400 litre
solar Buffer tank
Approx. 8.4 m²
300 - 500 litre
solar Buffer tank
Approx.14.0 m²
800 litreHYKO thermal
store
Approx.16.8 m²
1000 litreHYKO thermal
store
Approx.22.4 m²
1500 litrebuffer tank and
400 litre solar Buffer tank
People and intended use Collector area Buffer tank
120 m²
90 m²
Planning and designing a solar thermal system
SOLARFOCUS offers you several thousand standardhydraulics schematics, and assists you perfectly inplanning, formulating quotations and realising yoursystems.
octoplus, fresh water module and solar thermal system
pellettop, HYKO thermal store 2R and solar thermal system
These design recommendations are intended to help you in planningyour system. Of course, the assumed values are for guidance only.Important parameters such as DHW consumption, roof inclinationand aspect must be given individual consideration during the planningphase. The building’s energy index and type of heating system aredecisive in determining the coverage rate for space heatinginstallations using solar energy.
E-mail: [email protected] l www.solarfocus.eu
makes you independent
therminator II touch with stratified buffer tank,
DHW tank and solar thermal system
therminator II touch with stratified buffer tank,
stratified charging module, fresh water module and solar
thermal system
8
For which Kind of Applications?
Areas of application for large-scale solar thermal systems:
small businesses, industry, the catering and hotel industry, and the
public sector
How to start?
Give us a call! Our friendly staff at the SOLARFOCUS Technical
Support will be glad to assist you in planning and technical design
of your large scale solar thermal systems.
Price list 2013
Large-Scale Solar Thermal Syste
9
1
makes you independent
Pay Back?
Large scale solar thermal systems
today achieve pay back times of
significantly under 10 years (with
RHI or alike e.g. 2-7 years).
With that such investments not only help to preserve
and treat with care our environment, the
energy produced essentially becomes free within
a reasonably short periode.
ems
10 Price list 2013
Easy Installation and Commissioning ...
SOLARFOCUS offers you a Full Training Curriculum coveringall important aspects regarding installation, commissioning, andservicing of solar thermal and biomass systems.
E.g. solar thermal systems with collectors mounted ...
... off-roof or ... roof-integrated
For further information please contact your local SOLARFOCUS Partner!
2
From Client’s first Contact to a Showcase System ...
11E-mail: [email protected] l www.solarfocus.eu
With Your Client:
1. Determine the needs and the requirements of the desired system (preliminary over the phone or accuratly with a site visit; check the download area on the SOLARFOCUS homepage for our standard forms and checklists).
2. Analyse the data + dimension and configure the system (the SOLARFOCUS Standard Hydraulic Schematics Library will be of good help in that).
3. Prepare your quotation on basis of the chosen hydraulic schematic (use the SOLARFOCUS Sample Quotations Library for that, also the structure of this pricelist will guide you like a checklist; in any case check with your local SOLARFOCUS Partner on correctness).
With your Local SOLARFOCUS Partner:
4. From order to delivery:
3 written order to your local SOLARFOCUS Partner,
3 you will get an order confirmation with the estimated delivery date and
3 a notification when the goods leave SOLARFOCUS stock,
3 delivery: all our deliveries are covered with insurance. Please check if you have received all the materials that you had ordered and for any transport damages.
In case of any necessary reclamations please write a notation on the forwarder’s deliverypapers before signing it.
5. Installation following the chosen hydraulic schematic, your local SOLARFOCUS Partner will give you any necessary support.
6. Commissioning together with your local SOLARFOCUS Partner.
Anual Maintenance Services:
7. The annual maintenance service not only guarantees a long system life time but also will help you to develop your relationship with your client!
8. All product warranties are according to EU directives. In addition to that, SOLARFOCUS offers extended warranties: a 10 year warranty for solar thermal collectors (for the CPC not only on the material but also against condensation) and the possibility to extend the warrantyfor biomass boilers up to 5 or 10 years (pls. find further information on the respective productwarranty papers or from your local SOLARFOCUS Partner).
For further information please contact your local SOLARFOCUS Partner!
E-mail: [email protected] l www.solarfocus.eu
makes you independent
12
Your Success with our Professional Assistance ...
*All our brochures, poster, and roll-ups can also be downloaded as pdf fromour homepage www.solarfocus.at
For further information please contact your local SOLARFOCUS Partner !
1.
2.
3.
4.
Our motivated and committed team will be glad to helpyou with your marketing activities with
Demonstrative and informative brochures*,sales documents*,posters and roll-ups*,PowerPoint presentations.
Illustrative and informative homepage.
Professional help with advertisements for all sorts of magazi-nes, with the design of your stand at fairs, ...
Product and technical training courses that will prepare youperfectly for the sale and after-sales service.
Don’t miss the chance to use the various possibilities of ourPR catalogue. You will be able to underline the professiona-lism of the products and your service through your appearan-ce and systematic advertisement of your company.
Price list 2013
13
2
Competition for Best System Documentation 2013
1.
2.
3.
What to send: Send us a technical descriptions of your solar thermal or biomass systems that include per system:
compulsory:
4 at least 2 pictures with high resolution (300 dpi),4 description of the system (incl. number and type of collectors,
boiler, storage system, hydraulic schematics ...),
optional:
4 installer’s and/or client’s impression of the system,4 pictures of installer and/or client,4 old system running costs,4 estimation of the savings with the new system against old ...
Where to send to: Please send your documentation on CD/DVD to
SOLARFOCUS GmbH or to the following e-mail:zH MARKETING [email protected] 14451 St. Ulrich / SteyrAustria
In case of any questions pls. contact Marlene Pfeiffer on +43 725 50002 32or [email protected]
Entry deadline: September 30th
(NOTE: participating in the competition you automatically give us your per-mission to use your material for promotional purposes)
Everyone wins: every documentation that provides info as to above wins:
+ 1 Polo SOLAROFOCUS*+ 1 Sweater SOLARFOCUS*
*also in female versions available
E-mail: [email protected] l www.solarfocus.eu
makes you independent
14
Your benefits:● 10-year warranty against condensation ● Impact and hailstone-resistant solar safety glass.● No exchange between interior and exterior air – therefore, no convectional
heat loss.● No condensation and therefore no destruction of the highly selective
absorber coating.● As a result of the cylindrical design of the CPC reflector, shallow-angled rays
are still used efficiently and the diffuse fraction of the light can be absorbed.● Flat construction (65 mm).● Proven thousands of times.Why is the construction of the collector so important?Because environmental influences such as wind and weather, UV radiation,snow loads and excessive variations in temperature affect the collector for decades.
DHW setCPC Collector
DHW sets
People People 1 - 3 2 - 4 3 - 5
Collector area m2 5.0 5.6 8.4
Set components
Collector CPC-S1 T (2.8 m2) Pcs./part no. 2 x 1001ST 3 x 1001ST
Collector CPC-S1-K T (2.5 m2) Pcs./part no. 2 x 1002ST
Plug-IN Buffer tank HE Lit./part no. 300 - 11111 400 - 11121
ECOLINE Buffer tank Lit./part no. 200 - 1171
Solar thermal system connection set Part no. 10090 10090 10090
Collector connection set Part no.
Pump group set HE Part no. 15110
Single-circuit control Part no. 16800
Anti-freeze concentrate Kg./part no. 10 - 1701 10 - 1701 20 - 2 x 1701
DHW mixer + fittings Part no. 1815 + 1816 1815 + 1816 1815 + 1816
Set components + off-roof parallel standard installation system
Off-roof fixing kit Part no. 10210AD2 10210AD2 10210AD3
Off-roof parallel standard set Part no. S0850 S0851 S0852
Set price € 4070.- 4628.- 6023.-Set components + roof-integrated/single-row installation system
Roof-integrated fixing kit Part no. 1010ID2 1010ID2 1010ID3
Collector flashings for CPC - single-row Part no. 1071G 1071G 1071G + 1071E1
Roof-integrated/single-row installation system set Part no. S0850/1 S0851/1 S0852/1
Set price € 4411.- 4967.- 6403.-Set components + roof-integrated/double-row installation system
Roof-integrated fixing kit Part no. 1010ID2
Collector flashings for CPC - double-row Part no. 1070Z
Roof-integrated/double-row installation system set Part no. S0851/2
Set price € 5017.-Optional corrugated pipe connection set
Corrugated pipe conn. DN20 15 m + fittings Part no. 1497-15 1497-15 1497-15
Surcharge € 470.- 470.- 470.-
No plastic – no wood – no insulation – no ventilation holes
makes you independent
15
2
• Covers up to 70% of DHW requirements.
• Suitable for every building.
• Can be combined with any heat source.
CPC Collector
3 - 5 4 - 7 5 - 7 8 - 12 12 - 20
8.4 12.5 11.2 14.0 16.8
3 x 1001ST 4 x 1001ST 5 x 1001ST 6 x 1001ST
5 x 1002ST
500 - 11131 500 - 11131 500 - 11131
750 - 1178 1000 - 1179
10090 10090 10090 10090 10090
10070
15114 15114
16800 16800
20 - 2 x 1701 20 - 2 x 1701 20 - 2 x 1701 30 - 1700 30 - 1700
1815 + 1816 1815 + 1816 1815 + 1816 1815 + 1817 1815 + 1817
10210AD3 10210AD2 + 10210AD3 1 x 10210AD4 10210AD2 + 10210AD3 2 x 10210AD3
S0853 S0854 S0855 S0856 S0857
6212.- 8042.- 7342.- 9274.- 10,764.-
1010ID3 1010ID2+ 1010ID3 1010ID4 1010ID2+ 1010ID3 2 x 1010ID3
1071G + 1071E1 1071G+1071E1+1071E2 1071G+1071E2 1071G+1071E1+1071E2 1071G + 2x1071E2
S0853/1 S0854/1 S0855/1 S0856/1 S0857/1
6592.- 8237.- 7754.- 9469.- 11,254.-
1010ID4 2 x 1010ID3
1071GZ 1071GZ+1071E2Z
S0855/2 S0857/2
7773.- 11,314.-
1497-15 1497-15 1497-15 1497-15 1497-15
470.- 470.- 470.- 470.- 470.-
E-mail: [email protected] l www.solarfocus.eu
DHW example diagram
DHW
Boiler flow
Boiler return
Cold water
Colle
ctor
16
The slim line to suit every wallet:
Your benefits:● Only high-quality materials.● Tightly welded aluminium casing, protects the inner workings
of the collector for decades.● Highly selective blue line full-area absorber.● 50 mm backing insulation ensures high efficiency.● 4 mm solar glass with low iron content.● Low installation costs thanks to simple pipework.● Suitable for all types of installation.
DHW set
DHW sets
People People 1 - 2 2 - 4 3 - 5
Collector area m2 4.2 5.6 8.4
Set components
Collector Sunnyline (2.8 m2) Pcs./part no. 2 x 500G 3 x 500G
Collector Sunnyline (2.1 m2) Pcs./part no. 2 x 400G
Plug-IN Buffer tank HE Lit./part no. 300 - 11111 400 - 11121
ECOLINE Buffer tank Lit./part no. 200 - 1171
Solar thermal system connection set Part no. 10090 10090 10090
Collector connection set Part no.
Pump group set HE Part no. 15110
Single-circuit control Part no. 16800
Anti-freeze concentrate Kg./part no. 10 - 1701 10 - 1701 20 - 2 x 1701
DHW mixer + fittings Part no. 1815 + 1816 1815 + 1816 1815 + 1816
Set components + off-roof parallel standard installation system
Off-roof fixing kit Part no. 421AD2 10210AD2 10210AD3
Off-roof parallel standard set Part no. S0 860 S0861 S0862
Set price € 3442.- 4152.- 5309.-Set components + roof-integrated/single-row installation system
Roof-integrated fixing kit Part no. 1010ID2 1010ID2 1010ID3
Collector flashings for Sunny - single-row Part no. 1081G 1081G 1081G + 1081E1
Roof-integrated/single-row installation system set Part no. S0860/1 S0861/1 S0862/1
Set price € 3824.- 4534.- 5742.-Set components + roof-integrated/double-row installation system
Roof-integrated fixing kit Part no. 1010ID2
Collector flashings for Sunny - double-row Part no. 1080Z
Roof-integrated/double-row installation system set Part no. S0861/2
Set price € 4587.-Optional corrugated pipe connection set
Corrugated pipe conn. DN20 15 m + fittings Part no. 1497-15 1497-15 1497-15
Surcharge € 470.- 470.- 470.-
Sunnyline Flat Plate Collector
No plastic – no wood – no rubber seals
makes you independent
17
2
Sunnyline • Covers up to 70% of DHW requirements.
• Suitable for every building.
• Can be combined with any heat source.
3 - 5 4 - 6 5 - 7 8 - 12 12 - 20
8.4 10.5 11.2 14.0 16.8
3 x 500G 4 x 500G 5 x 500G 6 x 500G
5 x 400G
500 - 11131 500 - 11131 500 - 11131
750 - 1178 1000 - 1179
10090 10090 10090 10090 10090
10070
15114 15114
16800 16800
20 - 2 x 1701 20 - 2 x 1701 20 - 2 x 1701 30 - 1700 30 - 1700
1815 + 1816 1815 + 1816 1815 + 1816 1815 + 1817 1815 + 1817
10210AD3 421AD2 + 421AD3 1 x 10210AD4 10210AD2 + 10210AD3 2 x 10210AD3
S0863 S0864 S0865 S0866 S0867
5498.- 6472.- 6390.- 8084.- 9336.-
1010ID3 1010ID2 + 1010ID3 1010ID4 1010ID2 + 1010ID3 2 x 1010ID3
1081G + 1081E1 1081G + 1081E1 + 1081E2 1081G + 1081E2 1081G + 1081E1 + 1081E2 1081G + 2 x 1081E2
S0863/1 S0864/1 S0865/1 S0866/1 S0867/1
5931.- 6720.- 6868.- 8620.- 9917.-
1010ID4 2 x 1010ID3
1081GZ 1081GZ + 1081E2Z
S0865/2 S0867/2
6886.- 9975.-
1497-15 1497-15 1497-15 1497-15 1497-15
470.- 470.- 470.- 470.- 470.-
E-mail: [email protected] l www.solarfocus.eu
DHW example diagram
DHW
Boiler flow
Boiler return
Cold water
Colle
ctor
18
CPC CollectorSolar heating set
Heating sets
People People 1 - 4 2 - 5
Collector area m2 11.20 14.00
Set components
Collector CPC-S1 T (2.8 m2) Pcs./part no. 4 x 1001ST 5 x 1001ST
Collector CPC-S1-K T (2.5 m2) Pcs./part no.
HYKO thermal store Lit./part no. 600 - 12165 800 - 12166
Insulation for HYKO thermal store Part no. 310600 310800
Sanitary expansion vessel for HYKO thermal store Part no. 1552 1552
buffer tank Lit./part no.
Insulation for buffer tank Part no.
Buffer connection DN40 Part no.
Fresh water module without circulation HE Lit./part no.
Cover for fresh water module Part no.
Two-zone solar stratified charging module HE Lit./part no.
Cover for stratified charging module Part no.
Solar thermal system connection set Part no. 10090 10090
Collector connection set Part no.
Pump group set HE Part no. 15113 15114
Solar expansion vessel Lit./part no.
Double-circuit control Part no. 16850 16850
Anti-freeze concentrate Kg./part no. 20 - 2 x 1701 20 - 2 x 1701
DHW mixer + fittings Part no. 1815 + 1816 1815 + 1816
Set components + off-roof parallel standard installation system
Off-roof fixing kit Part no. 2 x 10210AD2 10210AD2 + 10210AD3
Connection profile for off-roof mounting battens Part no. 9159 9159
Off-roof parallel standard set Part no. S0870 S0871
Set price € 8348.- 10,003.-Set components + roof-integrated/single-row installation system
Roof-integrated fixing kit Part no. 1010ID4 1010ID2 + 1010ID3
Collector flashings for CPC - single-row Part no. 1071G + 1071E2 1071G + 1071E1 + 1071E2
Roof-integrated/single-row installation system set Part no. S0870/1 S0871/1
Set price € 8740.- 10,441.-Set components + roof-integrated/double-row installation system
Roof-integrated fixing kit Part no. 1010ID4
Collector flashings for CPC - double-row Part no. 1071GZ
Roof-integrated/double-row installation system set Part no. S0870/2
Set price € 8759.-Optional corrugated pipe connection set
Corrugated pipe conn. DN20/25 15 m + fittings Part no. 1497-15 1497-15
Surcharge € 470.- 470.-
No plastic – no wood – no insulation – no ventilation holes
19
2
NOTE: The expansion vessel for your heating system has to be ordered separately!
FRESH WATERSYSTEM
E-mail: [email protected] l www.solarfocus.eu
4 - 6 4 - 8 4 - 6 4 - 6
16.80 20.00 20.00 22.40
6 x 1001ST 8 x 1001ST
8 x 1002ST 8 x 1002ST
1000 - 12167 1250 - 12168
311000 311250
1552 1552
800 - 2 x 1231 1000 - 2 x 1232
2 x 310800 2 x 311000
4 x 1845 4 x 1845
26 - 118261 26 - 118261
118152 118152
20 - 119231 40 - 119232
118152 118152
10090 10090 10090 10090
10070 10070 10070 10070
15114 15121
1540-80 1540-100
16850 16850
30 - 1700 30 - 1700 30 - 1700 30 - 1700
1815 + 1816 1815 + 1817
2 x 10210AD3 2 x 10210AD4 2 x 10210AD4 2 x 10210AD4
9159 9159 9159 9159
S0872 S0873 S0874 S0875
11,688.- 13,897.- 15,574.- 16,942.-
2 x 1010ID3 2 x 1010ID4 2 x 1010ID4 2 x 1010ID4
1071G + 2 x 1071E2 1071G + 3 x 1071E2 1071G + 3 x 1071E2 1071G + 3 x 1071E2
S0872/1 S0873/1 S0874/1 S0875/1
12,158.- 14,438.- 16,115.- 17,483.-
2 x 1010ID3 2 x 1010ID4 2 x 1010ID4 2 x 1010ID4
1071GZ + 1071E2Z 1071GZ + 2 x 1071E2Z 1071GZ + 2 x 1071E2Z 1071GZ + 2 x 1071E2Z
S0872/2 S0873/2 S0874/2 S0875/2
12,218.- 14,539.- 16,216.- 17,584.-
1497-15 1498-15 1498-15 1498-15
470.- 607.- 607.- 607.-
Buffer/FWM/stratified charging example diagramHYKO thermal store example diagram
Boiler
HF
HR
flow
Stratified charging module
Colle
ctor
Cold water
Additional heating
Colle
ctor
Boiler
return
Cold water
DHW
20
No plastic – no wood – no rubber seals
Solar heating set
Heating sets
People People 1 - 4 2 - 5
Collector area m2 11.20 14.00
Set components
Collector Sunnyline (2.8 m2) Pcs./part no. 4 x 500G 5 x 500G
Collector Sunnyline (2.1 m2) Pcs./part no.
HYKO thermal store Lit./part no. 600 - 12165 800 - 12166
Insulation for HYKO thermal store Part no. 310600 310800
Sanitary expansion vessel for HYKO thermal store Part no. 1552 1552
buffer tank Lit./part no.
Insulation for buffer tank Part no.
Buffer connection DN40 Part no.
Fresh water module without circulation HE Lit./part no.
Cover for fresh water module Part no.
Two-zone solar stratified charging module HE Lit./part no.
Cover for stratified charging module Part no.
Solar thermal system connection set Part no. 10090 10090
Collector connection set Part no.
Pump group set HE Part no. 15113 15114
Solar expansion vessel Lit./part no.
Double-circuit control Part no. 16850 16850
Anti-freeze concentrate Kg./part no. 20 - 2 x 1701 20 - 2 x 1701
DHW mixer + fittings Part no. 1815 + 1816 1815 + 1816
Set components + off-roof parallel standard installation system
Off-roof fixing kit Part no. 2 x 10210AD2 10210AD2 + 10210AD3
Connection profile for off-roof mounting battens Part no. 9159 9159
Off-roof parallel standard set Part no. S0880 S0881
Set price € 7394.- 8813.-Set components + roof-integrated/single-row installation system
Roof-integrated fixing kit Part no. 1010ID4 1010ID2 + 1010ID3
Collector flashings for Sunny - single-row Part no. 1081G + 1081E2 1081G + 1081E1 + 1081E2
Roof-integrated/single-row installation system set Part no. S0880/1 S0881/1
Set price € 7854.- 9041.-Set components + roof-integrated/double-row installation system
Roof-integrated fixing kit Part no. 1010ID4
Collector flashings for Sunny - double-row Part no. 1081GZ
Roof-integrated/double-row installation system set Part no. S0880/2
Set price € 7872.-Optional corrugated pipe connection set
Corrugated pipe conn. DN20/25 15 m + fittings Part no. 1497-15 1497-15
Surcharge € 470.- 470.-
Sunnyline Flat Plate Collector
21
2
NOTE: The expansion vessel for your heating system has to be ordered separately!
E-mail: [email protected] l www.solarfocus.eu
FRESH WATERSYSTEM
4 - 6 4 - 8 4 - 6 6 - 8
16.80 21.00 22.40 28.00
6 x 500G 8 x 500G 10 x 500G
10 x 400G
1000 - 12167 1250 - 12168
311000 311250
1552 1552
1000 - 2 x 1232 1000 - 3 x 1232
2 x 311000 3 x 311000
4 x 1845 8 x 1845
26 - 118261 35 - 118262
118152 118152
40 - 119232 40 - 119232
118152 118152
10090 10090 10090 10090
10070 10070 10070 10070
15114 15121
1540-100 1540-100
16850 16850
30 - 1700 30 - 1700 30 - 1700 30 - 1700
1815 + 1816 1815 + 1817
2 x 10210AD3 1 x 421AD4 + 2 x 421AD3 2 x 10210AD4 1 x 10210AD4 + 2 x 10210AD3
9159 2 x9159 9159 2 x 9159
S0882 S0883 S0884 S0885
10,260.- 12,865.- 15,038.- 18,614.-
2 x 1010ID3 2 x 1010ID4 + 1010ID2 2 x 1010ID4 2 x 1010ID4 + 1010ID2
1081G + 2 x 1081E2 1081G + 4 x 1081E2 1081G + 3 x 1081E2 1081G + 4 x 1081E2
S0882/1 S0883/1 S0884/1 S0885/1
10,821.- 13,605.- 15,695.- 19,354.-
2 x 1010ID3 2 x 1010ID4 + 1010ID2 2 x 1010ID4 2 x 1010ID4 + 1010ID2
1081GZ + 1081E2Z 1081GZ + 3 x 1081E2Z 1081GZ + 2 x 1081E2Z 1081GZ + 3 x 1081E2Z
S0882/2 S0883/2 S0884/2 S0885/2
10,879.- 13,743.- 15,793.- 19,492.-
1497-15 1498-15 1498-15 1498-15
470.- 607.- 607.- 607.-
Buffer/FWM/stratified charging example diagramHYKO thermal store example diagram
Boiler
HF
HR
flow
Stratified charging module
Colle
ctor
Cold water
Cold waterAdditional heating
Colle
ctor
Boiler
return
DHW
22 Price list 2013
The technologyThe collector casingl The 1.5 mm tightly welded aluminium casing without
ventilation holes forms the „foundation“. The absorberl Highly selective coated copper absorber.The reflectorl The cylindrical, mirror-finish rolled, galvanically
anodised pure aluminium reflector bundles the incidental sun rays onto the vertically fitted absorber strip.
The solar safety glassl 4 mm prism-structured solar safety glass with low
iron content.The special sealingl Permanently elastic, UV-protected special sealing.
4 Only high-quality materials;corrosion and oxidation-resistant.
4 Simple hydraulic pipework.4 Flat construction.4 Suitable for all types of installation.4 Universally deployable:
Swimming pool heatingDHW preparationHeating back-up
4 Delighted SOLARFOCUS system owners throughout Europe.
No ventilation holes – no plastic –
no wood – no insulation – no rubber seals
The glass holding framel Special anodised aluminium profile.The surface sealing connectorsl 1/2” external thread with flat seal.The negative pressure valvel Negative pressure valve to balance the pressure.
When the internal air of the collector is warmed for the first time, the air expands and excess pressure is formed. The valve opens and the air can escape. When the air cools again, the valve closes and negative pressure is formed inside the collector. The reflectors support the glass pane on the casing (0.1 bar = 1000 kg/m2).
CUSTOMER BENEFITS4 The vertical fitting of the absorber allows
shallow-angled light to be utilised.4 Through the irradiation of the absorber from BOTH
sides, the absorber does not have a rear side, which would otherwise simply be a heat loss area.
4 The small absorber strip results in a minimalheat radiating surface and, consequently, less heat loss (radiator principle). At the same time, the narrow absorber strip enables fast heating up.
4 10-year warranty against condensation.4 No insulation in the collector.4 87% diffusion factor; important for solar radiation
in cloudy conditions.
CPC Collector THE CRUCIAL DIFFERENCES
23
TWL TWL TWL
TWB
TWB
TWB
1.10 1.02
1.0
2
E-mail: [email protected] l www.solarfocus.eu
makes you independent
NOTE:
For regions with heavy snow loads,
please request our data sheet
“HEAVY SNOW LOADS”.
TIP:
When fitting a sensor collector,
do not forget collector sensor part no.
1620-PT!
NOTE on special sizes:
We need the exact dimensions you require in order to plan and manufacture your system accurately! Sheet metal frames should
be created by your professional roofer on site; SOLARFOCUS would be happy to assist with technical matters.
MORNING 365 DAYS AFTERNOON
SOUTH WESTEAST
Inci
dence
angle
modifi
er
(-)
Improved energy absorption
SOLARFOCUS characteristic
Flat Plate Collector characteristic
Collector special sizes
CPC Collector
1005ST CPC Special size blue line Per m2
Special size for CPC collectors onlyMax. dimensions 2400 x 1400 mm; minimum area 1.5 m2
Please note the lead time: approx. 5 weeks!
IMPORTANT: A minimum of 1.5 m2 will be charged!
646.-
CPC solar collector CPC-S1 blue lineAluminium casing incl. fixing bracket, 4 mm solar glass, highly selective, sputtered copper absorber (emission-free coating process), coefficient of absorption: > 95%, coefficient of emission: 5%, mirror-finish anodised reflector, anthracite aluminium glass holding frame, packed in a box.
1001ST1002ST
CPC-S1 T 2.8 m2 L/W/H 2400 x 1155 x 65 mm Per pc.CPC-S1-K T 2.5 m2 L/W/H 2125 x 1155 x 65 mm Per pc.
1001STWL1001STWB
CPC-S1 TWL 2.8 m2 L/W/H 2400 x 1155 x 65 mm Per pc.CPC-S1 TWB 2.8 m2 L/W/H 2400 x 1155 x 65 mm Per pc.
F Sensor collector (example: 1001STF)For use with a controller that does not support a „starting function“.Without sensor (part no.: 1620-PT) Per collector
Additional Surcharge
Landscape format: for 1001ST only
1620-PT KF-PT PT 1000 collector sensor Ø 5.9 x 20 mm
Collector sensor
998.-912.-
1078.-1078.-
24.-
25.-
Installation options
24
TOP
Sunnyline collector THE FLAT PLATE COLLECTOR
The technology
The collector casingl The tightly welded aluminium casing forms the
„foundation“. The absorberl The highly selective, coated blue line full-area absorber
impresses thanks to its solar absorption rate of approx. 95% and thermal emission rate of approx. 5%.
The solar safety glassl 4 mm prism-structured solar safety glass with low
iron content.
4 50 mm backing insulation ensures high efficiency.4 4 mm solar glass with low iron content:
solar transmission 92%4 Low installation costs thanks to simple pipework.4 Suitable for all types of installation.4 Delighted SOLARFOCUS system owners
throughout Europe.
No plastic – no wood –
no rubber seals
The special sealingl Permanently elastic, UV-protected special sealing.The glass holding framel Special anodised aluminium profile.The surface sealing connectorsl 1/2” external thread with flat seal.
The surface seals on the inside and outside of the casing are plane parallel bolted with brass nuts and hermetically seal the casing against environmental influences. No weather-susceptible rubber or plastic seals.
CUSTOMER BENEFITS
4 Universally deployable:Swimming pool heatingDHW preparationHeating back-up
4 Only high-quality materials;corrosions and oxidation-resistant.
4 The 1 mm tightly welded aluminium casing protects the inner workings of the collector for decades.
4 Highly selective blue line full-area absorber.
Price list 2013
25
WL WL WL
WB
WB
WB
Installation options
2
makes you independent
NOTE:
For regions with heavy snow loads,
please request our data sheet
“HEAVY SNOW LOADS”.
TIP:
When fitting a sensor collector,
do not forget collector sensor part no.
1620-PT!
Sunnyline collector
Sunnyline Flat Plate CollectorAluminium casing incl. fixing bracket, 4 mm solar glass, highly selective blueline full-area absorber and 50 mm backing insulation.Anthracite aluminium glass holding frame, packed in a box.
500G400G
Sunny-28 2.8 m2 L/W/H 2400 x 1155 x 85 mm Per pc.Sunny-21 2.1 m2 L/W/H 1785 x 1155 x 85 mm Per pc.
500GWL500GWB
Sunny-28WL 2.8 m2 L/W/H 2400 x 1155 x 85 mm Per pc.Sunny-28WB 2.8 m2 L/W/H 2400 x 1155 x 85 mm Per pc.
Landscape format: for 500G ONLY
Additional Surcharge
F
Collector sensor
760.-598.-
836.-836.-
24.-
25.-
Sensor collector (example: 500GF or 500GWBF)For use with a controller that does not support a „starting function“.Without sensor (part no.: 1620-PT) Per collector
1620-PT KF-PT PT 1000 collector sensor Ø 5.9 x 20 mm
Installation types for CPC and Sunnyline
E-mail: [email protected] l www.solarfocus.eu
26
Solar thermal system connection setSet for solar flow and return with 2 pieces stainless steel corrugated piping with 1/2“and 3/4“ union nuts and 2 soldering sockets Ø 22 mm x 3/4“ piece. Operatingpressure: max. 6 bar. With insulation, sensor adapter and PT 1000 collector sensor.
TIP: Do not forget collector sensor part no.
1620 PT!
NOTE: Please use original shaped bricks
for tiled roofs.
NOTE: Not suitable for
exterior use!
Connection set for CPC and Sunnyline collectors
Part no.: 10065
Price list 2013
Roof-integrated fixing kitFixing screws, aluminium intermediate strip, silicon and fittings for connectingthe collectors to one another.
Collector array connection setSet for solar flow and return with 2 pieces stainless steel corrugated pipingwith 1/2“ and 3/4“ union nuts and 2 soldering sockets Ø 22 mm x 3/4“ piece.Operating pressure: max. 6 bar. With insulation. Used to connect severalcollector arrays, e.g. for EAST-WEST systems or double-row collectorarrangements. When using a sensor collector, part no. 10090 is not required.
Silicon roof feed-throughEPDM roof feed-through for diameters up to 35 mm incl. fixing flange andinstallation material.
KAS Length 1000 mm 1 pairKAS30 Length 3000 mm 1 pair
1006 SD Per pair
10101010ID21010ID31010ID4
ID1 Roof-integrated fixing kit For 1 collectorID2 Roof-integrated fixing kit For 2 collectorsID3 Roof-integrated fixing kit For 3 collectorsID4 Roof-integrated fixing kit For 4 collectors
93.-154.-
Stainless steel cable protection hoseMechanical protection for the collector sensor cable. Max. 50 running m/roll
KSS Internal DM 8 mm, external DM 10 mm Per running m 4.20
Collector connection hose, stainless steel corrugated pipewith 1/2“ union nut incl. seals. Max. operating pressure 6 bar with insulation.Usage: for connecting multiple-row collector arrays to one another.IMPORTANT: case max. 4 collectors in series!
53.-
42.-79.-
115.-151.-
100701007030
Part no.:
10090/1009025/1009030
Part no.:
10070 or 1007030
Return Return
Max. 4 collectors Max. 4 collectors
Retu
rn
Retu
rn
Flo
w
10065
1008030 KVE Length 3000 mm Per pc. 69.-
Air sealing gasketSelf-adhesive film cover. DM 42 - 55 mm
1009010090251009030
SAS Length 1000 mm 1 pairSAS25 Length 2500 mm 1 pairSAS30 Length 3000 mm 1 pair
122.-169.-178.-
1008 LM Per pair 26.50
27
2
makes you independent
Collector flashings for CPC – single-rowStandard version for common types of roof tile. With finishing band on the bottom end flashing sheet! Painted aluminium sheet, colour: anthracite. Simple fitting through pre-fabricated bends and foldings, multi-part, incl. small parts.
Collector flashings for CPC – double-row Standard version for common types of roof tile. With finishing band on the bottom end flashing sheet! Painted aluminium sheet, colour: anthracite. Simple fitting through pre-fabricated bends and foldings, multi-part, incl. small parts.
Special collector flashings for CPCFor asymmetric collector arrays, e.g. for roof integration of 7 CPC collectors,installed in two rows, staggered by one or two collectors. Includes finishing band.Price determined by circumference (see diagram). Lead time approx. 3 weeks.
Underlay wedge for collector flashings for CPCTo support the top flashing sheet for heavy snow loads.Made of wood L = 100 cm
Collector flashings for CPC – without finishing band For roof shingle and plain tile roofingLead time of approx. 3 weeks.
Additional Surcharge
10701071G
1071E11071E2
1070Z1071GZ
1071E2Z
KE-1 NOT extendable For 1 collectorKEG-2 Basic set For 2 collectorsKEE-1 Extension set + 1 collectorKEE-2 Extension set + 2 collectors
KEZ-2 NOT extendable For 2 collectorsKEGZ-4 Basic set - double-row For 4 collectorsKEEZ-2 Extension set + 2 collectors
W Landscape installation, fitted beside each other only for 1070, 1071G, 1071E1, 1071E2 Per collector
7433 S1UK Underlay wedge Per collector
O Without finishing band Per collector
Additional Reduced
7544 KSEFB-S1 Per running m
Basic set part no.: 1071G
Basic set part no.: 1071GZ
Basic set part no.: 1071GW
Extension (depicted is 1071E1)
Extension (depicted is 1071E2Z)
Extension (depicted is 1071E1W)
Gap betweenthe collectors of
150 mm
Roof inclination
min. 20°
Roof inclination
min. 20°
IMPORTANT:
Additional „W“ only for collectors of 2.8 m2
457.-526.-135.-263.-
574.-808.-304.-
104.-
14.70
24.90
92.-
Collector flashings for CPC collectors
E-mail: [email protected] l www.solarfocus.eu
IMPORTANT:
Please provide drawings for
special orders!
Lead time of approx. 3 weeks
IMPORTANT:
Flashings which are not listed in the price list are to be treated as special
flashings, in case of any questions please contact our Technical Department!
28
Collector flashings for Sunnyline collectors
Collector flashings for Sunnyline – single-rowStandard version for common types of roof tile. With finishing band on the bottom end flashing sheet! Single-row, for roof-integrated installation/painted aluminium sheet, colour: anthracite. Simplefitting through pre-fabricated bends and foldings, multi-part, incl. small parts.
Collector flashings for Sunnyline – double-rowStandard version for common types of roof tile. With finishing band on the bottom end flashing sheet! Single-row, for roof-integrated installation/painted aluminium sheet, colour: anthracite. Simplefitting through pre-fabricated bends and foldings, multi-part, incl. small parts.
Special collector flashings for Sunnyline
For asymmetric collector arrays, e.g. for roof integration of 13 Sunny collectors,installed in three rows, staggered by one or two collectors. Includes finishing band.Price determined by circumference (see diagram). Lead time approx. 3 weeks.
Basic set part no.: 1081G
Basic set part no.: 1081GZ
Basic set part no.: 1081GW
Extension (depicted is 1081E1)
Extension (depicted is 1081E2Z)
Extension (depicted is 1081E1W)
Additional Surcharge
Roof inclination
min. 25°
Roof inclination
min. 25°
Underlay wedge for collector flashings for Sunnyline
To support the top flashing sheet for heavy snow loads.Made of wood L = 100 cm
Collector flashings for Sunnyline – without finishing band For roof shingle and plain tile roofingLead time of approx. 3 weeks.
Additional Reduced price
IMPORTANT:
Additional „W“ only for collectors of 2.8 m2
1080Z1081GZ
1081E2Z
KE-1 NOT extendable For 1 collectorKEG-2 Basic set For 2 collectorsKEE-1 Extension set + 1 collectorKEE-2 Extension set + 2 collectors
KEZ-2 NOT extendable For 2 collectorsKEGZ-4 Basic set - double-row For 4 collectorsKEEZ-2 Extension set + 2 collectors
570 GUK Underlay wedge Per collector
O Without finishing band Per collector
560 KSFG Per running m
W Landscape installation, fitted beside each other only for 1080, 1081G, 1081E1, 1081E2 Per collector
10801081G
1081E11081E2
492.-567.-147.-288.-
620.-873.-328.-
14.70
24.90
92.-
104.-
Gap betweenthe collectors of
150 mm
IMPORTANT:
Please provide drawings for
special orders!
Lead time of approx. 3 weeks
IMPORTANT:
Flashings which are not listed in the price list are to be treated as special
flashings, in case of any questions please contact our Technical Department!
Price list 2013
29
2
Off-roof bracket „AD“ Usage: tiled roofs
Off-roof bracket „ADHS“ Usage: tiled roofs, heavy
snow loads
Additional additional „S“, hanger boltUsage: corrugated fibre cement(Eternit)
Additional additional „SEP“, hanger bolt with stainless steel sheetUsage: Eternit
Additional additional „SD“, pitched roofs with min. 10° roof inclinationUsage: bitumen
roofing felt
Additional additional „FD“, flat roofsUsage: bitumen
roofing felt
Additional additional „PRE“, Prefa roofing with hanger boltSubstructure: battens and full boardingUsage: Prefa
Additional additional „PRE-X“, Prefa roofing with roof hookSubstructure: full boardingUsage: Prefa
Additional additional „BK“, roof seam clampInstallation on roof seamUsage: tin roofs
Additional additional „TP“Installation on smooth sheetsUsage: tin roofs
Additional additional „SCH“Usage: slate,
plain tiles
Additional additional „TD“Usage: trapezoidal tin roofsOn request, trapezoidaldimensions required.
Off-roof connection options
E-mail: [email protected] l www.solarfocus.eu
makes you independent
30
Off-roof fixing for CPC and Sunnyline 28
Tiled roofs
Connection profile for installation railsPre-drilled aluminium bracket incl. stainless steel screws for connecting several collector arrays.
9159 Connection profile Per pair 20.-
Off-roof fixing kitPre-drilled aluminium rails, with off-roof bracket incl. stainless steel screws andcorrugated-pipe collector connection.
Off-roof fixing for Sunnyline 21
Tiled roofs Off-roof fixing kitPre-drilled aluminium rails, with off-roof bracket incl. stainless steel screws andcorrugated-pipe collector connection.
Alternative fixing types for off-roof installation, instead of off-roof brackets.
Additional Surcharge
Price list 2013
Parallel 0° Elevated 20° Elevated 45° Elevated 70°
Part no.: 10210AD1 10220AD1 10230AD1 10240AD1
Per pc. 132.- 200.- 215.- 233.-
Part no.: 10210AD2 10220AD2 10230AD2 10240AD2
Per pc. 264.- 400.- 430.- 448.-
Part no.: 10210AD3 10220AD3 10230AD3 10240AD3
Per pc. 396.- 600.- 645.- 663.-
Part no.: 10210AD4 10220AD4 10230AD4 10240AD4
Per pc. 528.- 800.- 860.- 878.-
Parallel 0° Elevated 20° Elevated 45° Elevated 70°
Part no.: 421AD1 422AD1 423AD1 424AD1
Per pc. 132.- 200.- 215.- 233.-
Part no.: 421AD2 422AD2 423AD2 424AD2
Per pc. 264.- 400.- 430.- 448.-
Part no.: 421AD3 422AD3 423AD3 424AD3
Per pc. 396.- 600.- 645.- 663.-
Part no.: 421AD4 422AD4 423AD4 424AD4
Per pc. 528.- 800.- 860.- 878.-
SSEP
BKSD
FD
PREPRE-X
SCHTDTP
Fixing with hanger bolt Per collectorFixing with hanger bolt and stainless steel sheet Per collectorFixing with roof seam clamp Per collectorFixing for roofing felt (bitumen) with special roof hook madeof aluminium. Min. 10° roof inclination. Per collectorFixing for roofing felt (bitumen) with holding plate made ofstainless steel. For flat roofs. Per collectorTo be sealed by a professional on site!For Prefa roofing with hanger bolt Per collectorFor Prefa roofing with roof hook Per collectorFor slate or plain tile roofing Per collectorTrapezoidal roof on request Per collectorFixing with support plate Per collector
——60.-
——
——
149.-
149.-150.-
77.-——
72.-
31
2
Off-roof fixing for heavy snow loads - CPC and Sunnyline 28
Only for
tiled roofs
Off-roof fixing for heavy snow loads - Sunnyline 21
Only for
tiled roofs
Off-roof fixing kit for heavy snow loadsPre-drilled aluminium rails, with additional off-roof brackets and installation rail incl.stainless steel screws and corrugated-pipe collector connection.
Connection profile for installation railsPre-drilled aluminium bracket incl. stainless steel screws for connecting several collector arrays.
9159 Connection profile Per pair 20.-
Off-roof fixing kit for heavy snow loadsPre-drilled aluminium rails, with additional off-roof brackets and installation rail incl.stainless steel screws and corrugated-pipe collector connection.
Off-roof fixing, heavy snow loads
E-mail: [email protected] l www.solarfocus.eu
Parallel 0° Elevated 20° Elevated 45° Elevated 70°
Part no.: 10210AD1HS 10220AD1HS 10230AD1HS 10240AD1HS
Per pc. 158.- 245.- 258.- 276.-
Part no.: 10210AD2HS 10220AD2HS 10230AD2HS 10240AD2HS
Per pc. 316.- 490.- 516.- 534.-
Part no.: 10210AD3HS 10220AD3HS 10230AD3HS 10240AD3HS
Per pc. 474.- 735.- 774.- 792.-
Part no.: 10210AD4HS 10220AD4HS 10230AD4HS 10240AD4HS
Per pc. 632.- 980.- 1032.- 1050.-
Parallel 0° Elevated 20° Elevated 45° Elevated 70°
Part no.: 421AD1HS 422AD1HS 423AD1HS 4240AD1HS
Per pc. 158.- 245.- 258.- 276.-
Part no.: 421AD2HS 422AD2HS 423AD2HS 424AD2HS
Per pc. 316.- 490.- 516.- 534.-
Part no.: 421AD3HS 422AD3HS 423AD3HS 424AD3HS
Per pc. 474.- 735.- 774.- 792.-
Part no.: 421AD4HS 422AD4HS 423AD4HS 424AD4HS
Per pc. 632.- 980.- 1032.- 1050.-
makes you independent
32
Wall installation
For fixing on thefacade at 45°.Aluminium strut, pre-drilled aluminiumrail, stainless steel screws andcorrugated-pipecollector connection.Without fixingmaterials for thefacade! Consulta builder!
Flat-roof gravel box
For fixing at 45° on analuminium casing tobe filled with gravel.Aluminium strut, pre-drilled aluminium rails,with aluminium casing(2.4 x 1.1 m),stainless steel screwsand corrugated-pipecollector connection. With protective liner.Without gravel.
Flat-roof concretebase
Concrete base,aluminium strut, pre-drilled aluminiumrails, stainless steel screws andcorrugated-pipecollector connection. With protective matand liner.
Free-standinginstallation
For fixing at 45°on foundationsconcreted by thecustomer. Aluminiumstrut, pre-drilledaluminium rails,with fischer bolts,stainless steel screwsand corrugated-pipecollector connection.
Special fixings for CPC and Sunnyline 28Wall installation at 90°
on request
IMPORTANT:
No performance warranty in
the case of 90° installation!
Additional
NOTE: In order to raise the concrete base, a crane must be provided on site!
Part no.: 10170FBA-1W W/H/L 250/175/1200 mm Weight approx. 2 x 115 kg
Part no.: 10170FBA-1 W/H/L 250/175/2000 mm Weight approx. 2 x 195 kg
Part no.: 470FBA-1 W/H/L 250/175/2000 mm Weight approx. 2 x 195 kg
Please always observe DIN 1055 and country-specific directives and take the building height, roof characteristics and roof
construction into account when installing solar collectors in areas with heavy snow loads or high wind loads! We recommend that
you consult a local civil engineer and provide additional fastening options if necessary.
Wall installation Flat-roof gravel box
W
ER
For landscape installation, ONLY for individual collectors(e.g. 10180FB-1W, 10170FBA-1W, 10160FDA-1W) Per collectorExtension from 45° to 70° elevation(e.g. 10160FDA-1WER, 10170FBA-1ER) Per collector
—-
18.-
Price list 2013
Part no.: 10140FB-1 10160FDA-1 10170FBA-1 10180FA-1
Per pc. 209.- 465.- 481.- 209.-
Part no.: 10140FB-2 10160FDA-2 10170FBA-2 10180FA-2
Per pc. 356.- 920.- 748.- 356.-
Part no.: 10140FB-3 10160FDA-3 10170FBA-3 10180FA-3
Per pc. 533.- 1375.- 1014.- 533.-
Part no.: 10140FB-4 10160FDA-4 10170FBA-4 10180FA-4
Per pc. 711.- 1830.- 1281.- 711.-
33
2
Special fixings for Sunnyline 21Wall installation
For fixing on thefacade at 45°.Aluminium strut, pre-drilled aluminium rail,stainless steel screwsand corrugated-pipecollector connection.Without fixingmaterials for thefacade! Consulta builder!
Flat-roof gravel box
For fixing at 45° on analuminium casing tobe filled with gravel.Aluminium strut, pre-drilled aluminium rails,with aluminium casing(2.4 x 1.1 m),stainless steel screwsand corrugated-pipecollector connection. With protective liner.Without gravel.
Flat-roof concretebase
Concrete base,aluminium strut, pre-drilled aluminium rails,stainless steel screwsand corrugated-pipecollector connection. With protective matand liner.
Free-standinginstallation
For fixing at 45°on foundationsconcreted by thecustomer. Aluminiumstrut, pre-drilledaluminium rails,with fischer bolts,stainless steelscrews andcorrugated-pipecollector connection.
makes you independent
Part no.: 440FB-1 460FDA-1 470FBA-1 480FA-1
Per pc. 209.- 465.- 481.- 209.-
Part no.: 440FB-2 460FDA-2 470FBA-2 480FA-2
Per pc. 356.- 920.- 748.- 356.-
Part no.: 440FB-3 460FDA-3 470FBA-3 480FA-3
Per pc. 533.- 1375.- 1014.- 533.-
Part no.: 440FB-4 460FDA-4 470FBA-4 480FA-4
Per pc. 711.- 1830.- 1281.- 711.-
NOTE: Sunnyline 21 (part no.: 400G) and CPC-S1K (part no.: 1002ST)
not available for landscape installation!
Additional Surcharge
Flat-roof concrete base Free-standing installation
ER Extension from 45° to 70° elevation(e.g. 470FBA-1ER) Per collector 18.-
E-mail: [email protected] l www.solarfocus.eu
34 Price list 2013
Off-roof fixing for CPC and Sunnyline 28, landscape installation
Tiled roofs
ORDERING NOTE:
Order collector with the
additional „WL“
ORDERING NOTE:
Order collector with the
additional „WB“
NOTE: Extension
“ER” ONLY for 45°
off-roof installation!
Landscape installation, fitted beside each otherPre-drilled aluminium rails, with off-roof bracket incl. stainless steel screws andcorrugated-pipe collector connection.
NOTE: Can also be used at 90° to the ridge direction
Landscape installation, fitted beside each other, heavy snow loadsPre-drilled aluminium rails, with additional off-roof brackets and installation rail incl.stainless steel screws and corrugated-pipe collector connection.
Landscape installation, fitted above each otherPre-drilled aluminium rails, with off-roof bracket incl. stainless steel screws andcorrugated-pipe collector connection.
Landscape installation, fitted above each other, heavy snow loadsPre-drilled aluminium rails, with additional off-roof brackets and installation rail incl.stainless steel screws and corrugated-pipe collector connection.
Alternative fixing types for off-roof installation, instead of off-roof brackets.
Additional Surcharge
NOTE: Sunnyline 21 (part no.: 400G) and CPC-S1K (part no.: 1002ST)
not available for landscape installation!
10210AD1W10220AD1W10230AD1W10240AD1W
9159
ADW Off-roof parallel For 1 collectorAD-20 Off-roof 20° For 1 collectorAD-45 Off-roof 45° For 1 collectorAD-70 Off-roof 70° For 1 collectorConnection profile Per pair
210.-276.-291.-309.-
20.-
10210AD1WHS10220AD1WHS10230AD1WHS10240AD1WHS
9159
ADWHS Off-roof parallel For 1 collectorADWSW-20 Off-roof 20° For 1 collectorADWSW-45 Off-roof 45° For 1 collectorADWSW-70 Off-roof 70° For 1 collectorConnection profile Per pair
252.-331.-349.-371.-
20.-
10210AD2WÜ10210AD3WÜ10210AD4WÜ
ADWÜ-2 Off-roof parallel For 2 collectorsADWÜ-3 Off-roof parallel For 3 collectorsADWÜ-4 Off-roof parallel For 4 collectors
419.-629.-839.-
10210AD2WÜHS10210AD3WÜHS10210AD4WÜHS
ADWÜHS-2 Off-roof parallel For 2 collectorsADWÜHS-3 Off-roof parallel For 3 collectorsADWÜHS-4 Off-roof parallel For 4 collectors
503.-755.-
1007.-
SSEP
BKSD
FD
PREPRE-X
TDTP
Fixing with hanger bolt Per collectorFixing with hanger bolt and stainless steel sheet Per collectorFixing with roof seam clamp Per collectorFixing for roofing felt (bitumen) with special roof hook madeof aluminium. Min. 10° roof inclination. Per collectorFixing for roofing felt (bitumen) with holding plate made ofstainless steel. For flat roofs. Per collectorTo be sealed by a professional on site!For Prefa roofing with hanger bolt Per collectorFor Prefa roofing with roof hook Per collectorTrapezoidal roof on request Per collectorFixing with support plate Per collector
——60.-
——
——
149.-
149.-150.-——
72.-
36
Single-coil DHW tank “ECOLINE”Steel tank with enamel according to DIN 4753 Part 3 and deep-drawn heating coil for additional heating. Directly applied CFC-free 50 mm PU rigid foam insulation, 5 mm RAL 9006 grey synthetic leather cladding, magnesium sacrificial anode, max. operating pressure: 10 bar.Flange DN 180 incl. blank flange plate.
TIP: Specially designed for log wood systems
Flange plates for the storagetanks can be found on page 56
LW = inside diameter (mm)
DHW tank “ECOLINE”
Single-coil DHW tank “ECOLINE”
Cold water feed (1“ ET)DHW outlet (1“ ET)Anode (1“ IT)Connection for electrical immersion heater (6/4“ IT)Connection for solar sensor/boiler sensor Circulation (3/4“ ET)Temperature indicatorHeating water return (1” ET)Heating water flow (1” ET)
KWWW
UEHZ
THRC
TS1S2
11401145
TS-R 300 With insulation Ø 700 x 1334 mmTS-R 500 With insulation Ø 700 x 1961 mm
Contents d D HT A B C E F G I J K 1* 2* 3* 4* 5*
300 600 700 1334 55 220 280 548 720 755 1179 1070 1226 1.5 8.4 103 1472 530
500 600 700 1961 55 220 280 695 965 1040 1264 1690 1853 1.9 19.0 169 2044 530
Maximum Maximum
operating pressure operating temperature
Domestic hot water 10 bar 90 °C
Heating water 10 bar 90 °C
1* Lower heating coil (m2) 3* Weight (kg) 5* Maximum installation length of heat exchanger (mm)2* NL - lower (DIN 4708) Buffer tank temp. (60 °C) 4* Tilted height (mm)
960.-1235.-
Price list 2013
37
3
Flange plates for the storagetanks can be found on page 56
DHW tank “ECOLINE”
Double-coil DHW tank “ECOLINE”
KWWW
UFTVR
EHZRCFS
Double-coil DHW tank “ECOLINE”Steel tank with enamel according to DIN 4753 Part 3. Directly applied CFC-free 50 mm PU rigid foam insulation, from 750 l: 100 mm flexible foaminsulation and 5 mm RAL 9006 grey synthetic leather cladding, up to 500 lwith magnesium sacrificial anode, 750 and 1000 l with parasitic current anode.Incl. thermometer and 2 welded-in bare-tube heat exchangers. Max. operating pressure: 10 bar. Flange DN 180 incl. blank flange plate.
1171
1172
1173
1177
1178
1179
TS-B 200 With insulation, weight 78 kg, coil 0.7/0.95 m² Ø 540 x 1473 mm
TS-B 300 With insulation, weight 138 kg, coil 0.8/1.55 m² Ø 600 x 1834 mm
TS-B 400 With insulation, weight 149 kg, coil 1.05/1.8 m² Ø 700 x 1631 mm
TS-B 500 With insulation, weight 200 kg, coil 1.3/1.9 m² Ø 700 x 1961 mm
TS-B 750 With insulation, weight 270 kg, coil 1.8/2.4 m² Ø 950 x 2100 mm
TS-B 1000 With insulation, weight 325 kg, coil 2.4/3.0 m² Ø 990 x 2100 mm
Maximum Maximum
operating pressure operating temperature
Domestic hot water 10 bar 90 °C
Heating water 10 bar 90 °C
Solar circuit 10 bar 90 °C
1* Upper heating coil (m2) 3* NL - upper (DIN 4708) Buffer tank temp. (60 °C) 5* Weight (kg) 7* Maximum installation length of heat exchanger (mm)2* Lower heating coil (m2) 4* NL - lower (DIN 4708) Buffer tank temp. (60 °C) 6* Tilted height (mm)
Contents d D HT A B C E F G I J K L M 1* 2* 3* 4* 5* 6* 7*
200 440 540 1473 55 191 240 280 686 736 786 899 1011 1146 1366 0.7 0.95 1.6 4.2 78 1530 390
300 500 600 1834 90 254 325 403 964 1013 1064 1179 1289 1424 1725 0.8 1.55 2.5 8.5 138 1892 430
400 600 700 1631 55 220 275 369 909 957 1006 1111 1223 1354 1523 1.05 1.8 5.0 12.8 149 1738 530
500 600 700 1961 55 220 275 380 965 1040 1114 1264 1409 1604 1853 1.3 1.9 8.9 19 220 2044 530
750 750 950 2100 222 302 455 652 982 1152 1272 1122 1502 1702 1226 1.8 2.4 4.1 17.5 270 2200 650
1000 790 990 2100 225 315 440 665 1085 1165 1415 1235 1565 1715 1226 2.4 3.0 5.2 22.0 325 2200 700
LW = inside diameter (mm)
Cold water feed (1“ ET, from 750 l 1” IT)DHW outlet (1“ ET, from 750 l 1” IT)Magnesium sacrificial anode (1” IT)Sensor sleeveThermometer sleeveFlow (1” ET, from 750 l 1” IT)Return (1” ET, from 750 l 1” IT)Electrical additional heating (6/4“ IT)Circulation (3/4” ET, from 750 l 3/4” IT)Parasitic current anode only for 750 and 1000 l (1/2“ IT)
853.-
1010.-
1233.-
1309.-
2264.-
2531.-
E-mail: [email protected] l www.solarfocus.eu
makes you independent
38
*
*
DHW tank “Plug-IN”Steel tank with enamel according to DIN 4753 Part 3. Directly applied CFC-free 50 mm PU rigid foam insulation, 5 mm RAL 9006 grey synthetic leathercladding with magnesium sacrificial anode. Incl. thermometer and 2 welded-inbare-tube heat exchangers, pump group set, flow regulator and solar controlpart no. 16820 (without speed control) pre-assembled. Incl. expansion vessel.Max. operating pressure: 10 bar.Flange DN 180 incl. blank flange plate.
DHW tank “Plug-IN”
DHW tank “Plug-IN”
DHW example diagram
DHW
Boiler flow
Boiler return
Cold water
Colle
ctor
DHW tank “Plug-IN” HE with high-efficiency pump (Para 25/1-7/130)
Cold water feed (1“ ET)DHW outlet (1“ ET)Protection anode (1” IT)Sensor sleeve - solarSensor sleeve - boiler ThermometerFlow - boiler (1” ET)Return - boiler (1” ET)Electrical immersion heater (6/4“ IT)Circulation (3/4” IT)Flow - solar (compression fitting DM 22)Return - solar (compression fitting DM 22)
KWWW
UFSFK
FVKRK
EHZRCVSRS
Maximum Maximum
operating pressure operating temperature
Domestic hot water 10 bar 90 °C
Heating water 10 bar 90 °C
Solar circuit 10 bar 90 °C
Contents d D HT A B C E G I J K L M 1* 2* 3* 4* 5* 6* 7*
300 500 600 1834 90 392 324 965 1015 1064 1179 1289 1424 1728 0.8 1.52 2.5 8.5 148 1892 415
400 600 700 1631 55 336 276 909 957.5 1070 1112 1224 1355 1526 1.0 1.81 5.0 12.8 159 1738 530
500 600 700 1961 55 336 276 965 1040.5 1115 12165 1410 1605 1856 1.3 1.95 8.9 19.0 230 2044 530
1* Upper heating coil (m2) 3* NL - upper (DIN 4708) Buffer tank temp. (60 °C) 5* Weight (kg) 7* Maximum installation length of heat exchanger (mm)2* Lower heating coil (m2) 4* NL - lower (DIN 4708) Buffer tank temp. (60 °C) 6* Tilted height (mm)
110111102111031
PL 300 With EST 25/7 and expansion vessel 25 l Up to 7 m2
PL 400 With EST 25/7 and expansion vessel 33 lUp to 13 m2
PL 500 With EST 25/7 and expansion vessel 33 lUp to 13 m2
111111112111131
PL 300H With Para 25/1-7/130 and expansion vessel 25 l Up to 7 m2
PL 400H With Para 25/1-7/130 and expansion vessel 33 l Up to 13 m2
PL 500H With Para 25/1-7/130 and expansion vessel 33 l Up to 13 m2
LW = inside diameter (mm)
1850.-2046.-2241.-
2100.-2301.-2490.-
Price list 2013High-efficiency pump HE: Water quality according to ÖNORM H 5195-1 or VDI Guideline 2035.
Also: The medium must be free of air and sludge!
39
3
HYKO thermal store
„HYKO“ DHW flow rates
Circulation lanceFor integrating the circulation of HYKO thermal stores or stratified storage tanks.Consisting of complete fitting with sleeve plus 100 cm pipe.Connection for circulation pipe 3/4” ET, connection for Buffer tank 1“ IT
* Min. 60 cm insertion depth required!
A Suction directionB Circulation pumpC DHW mixing valveD Non-return valve
HYKO volume Litres 600 800 1000 1250 1500
Example 1
Boiler flow temperature °C 70 70 70 70 70
Buffer tank temperature °C 65 65 65 65 65
a) Continuous DHW flow rate l/h 10 - 45 °C 1200 1700 1900 1900 2400
Required boiler heating output kW 48.84 69.19 77.33 77.33 97.69
b) Continuous DHW flow rate l/h 10 - 45 °C 600 700 800 800 1100
Required boiler heating output kW 24.42 28.49 32.56 32.56 44.77
Example 2
Boiler flow temperature °C 60 60 60 60 60
Buffer tank temperature °C 55 55 55 55 55
Continuous DHW flow rate l/h 10 - 45 °C 600 900 1000 1000 1100
Required boiler heating output kW 24.42 36.63 40.70 40.70 44.77
1870 ZKL Per pc.
NOTE:
When using a DHW mixing valve,
a second circulation lance
is required
IMPORTANT: Do not use the HYKO thermal store in
combination with heat pumps!
FRESH WATERSYSTEM
84.-
E-mail: [email protected] l www.solarfocus.eu
makes you independent
40
The connection of the boiler return isbased on the hydraulic integration, which
is dependent on the type of boiler, either J, N, E or L
The higher the tank temperature, the higher the
risk of furring in the fresh water heat exchanger!
Recommended Buffer tank temperature approx.
70 °C
Contents A B C D d E F G I J K L M N P HS HG 1* 2* 3* 4*litres mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm m2 m2 kg mm
600 154 224 224 900 700 594 724 804 994 994 1344 1394 1464 404 1214 1642 1700 1.2 1.8 145/158 1690
800 186 256 256 990 790 626 801 866 1026 1026 1386 1426 1496 441 1226 1685 1760 1.8 2.4 170/192 1740
1000 230 300 300 990 790 844 970 1040 1210 1249 1720 1720 1790 567 1479 2040 2090 2.4 3.0 202/232 2090
1250 220 300 300 1200 950 784 970 1085 1160 1239 1700 1700 1780 550 1470 2015 2100 2.4 3.0 234/273 2090
1500 232 312 312 1250 1000 862 962 1090 1202 1247 1712 1712 1792 572 1487 2050 2125 2.4 3.6 272/308 2110
1* Upper heating coil (m2) 2* Lower heating coil (m2) 3* Weight (kg) 4* Tilted height without insulation (mm)
IMPORTANT: Do not use the HYKO thermal
store in combination with heat pumps!
HYKO Thermal store for DHW and heating water preparation.Consisting of: steel tank and fitted stainless steel ribbed heat exchanger DM 40 for hygienic DHW preparation.With one or two welded-in bare-tube coils for solar charging with stratifiedseparation plate. Stratified charging lance for the heating return. Without insulation.Max. buffer operating pressure 3 barMax. DHW heat exchanger operating pressure 6 barMax. operating temperature 95 °C
Insulation for HYKO Flexible foam insulation up to 1000 litres: 100 mm, from 1250 litres: 125 mm.With synthetic leather cover. Colour: RAL 9006 grey
„HYKO“ thermal store
„HYKO“ thermal store
FRESH WATERSYSTEM
NOTE:
An expansion vessel and a 6 bar safety
valve are required on the cold water side!
WARRANTY STIPULATIONS
Price list 2013
1216512165-2R
1216612166-2R
1216712167-2R
1216812168-2R
1216912169-2R
HYKO 600 1 coil without insulation Ø 700 x 1642 mmHYKO 600 2 coils without insulation Ø 700 x 1642 mmHYKO 800 1 coil without insulation Ø 790 x 1685 mmHYKO 800 2 coils without insulation Ø 790 x 1685 mmHYKO 1000 1 coil without insulation Ø 790 x 2040 mmHYKO 1000 2 coils without insulation Ø 790 x 2040 mmHYKO 1250 1 coil without insulation Ø 950 x 2015 mmHYKO 1250 2 coils without insulation Ø 950 x 2015 mmHYKO 1500 1 coil without insulation Ø 1000 x 2050 mmHYKO 1500 2 coils without insulation Ø 1000 x 2050 mm
310600310800311000311250311500
HYKO 600 Insulation Ø 900 x 1700 mmHYKO 800 Insulation Ø 990 x 1760 mmHYKO 1000 Insulation Ø 990 x 2090 mmHYKO 1250 Insulation Ø 1200 x 2100 mmHYKO 1500 Insulation Ø 1250 x 2125 mm
2092.-2333.-2479.-2618.-2798.-3003.-3186.-3453.-3745.-3859.-
288.-324.-420.-520.-634.-
KW (A)WW (S)
SVL (F/K)SRL (C/I)EHZ (G)HRL (B)HVL (J)
Entlüft. (H)SF (M)KF (O)
Rest FreiKVL (Q / R)
KRL (N)KRL (L)
Cold water feed (1“ IT)Hot water outlet (1“ IT)Solar flow (1“ IT)Solar return (1” IT)immersion heater (6/4“ IT)Heating water return (6/4” IT) (stratified charging unit)Heating water flow (6/4” IT)Venting (6/4” IT)Solar sensor (1/2” IT)Boiler sensor (1/2” IT)AvailableBoiler flow (6/4” IT)Automatic boiler (6/4” IT)Boiler return / log woods (6/4” IT)
41
3
NOTE: For a diagram, see page 46
Sanitary expansion vessel
Sanitary expansion vessel 25 for HYKO and FWM with circulationCapacity 25 l, max. operating pressure 10 bar, pre-pressure 4 bar, incl. flow-through unit, connections 3/4” ET;diameter 280 mm, height 515 mm, incl. 3/4” T-piece.
Part no. 1651
3-way motor valveSynchronised motor 230 V with spring-loaded return, max. pressure: 10 bar, temp.: + 5 °C to + 110 °C, max. differential pressure: 1651/0.6 bar, 1652/0.2 bar.1 inlet, 2 outlets. As it flows through the valve, the medium is diverted from oneoutlet to the other according to the position of the valve disc.
Part no. 1652 incl. fittings
Thermal distribution valveConsisting of: 3-way distribution valve, temperature controller, with 2 mcontact sensor (50 to 80 °C), threaded nozzles 1” or 6/4” (1 set = 3 pcs.).1 inlet, 2 outlets. As it flows through the valve, the medium is diverted fromone outlet to the other according to the position of the valve disc.
Valves
Thermal mixing valveConsisting of: 3-way mixing valve, temperature controller, with 2 m contactsensor (50 to 80 °C), threaded nozzles 1” or 6/4” (1 set = 3 pcs.). 2 inlets,1 outlet. As it flows through the valve, the medium is mixed depending onthe position of the valve disc.
1552 ADG-S Sanitary design Per/pc.
16511652
MV-1“ IT KVS: 12.6 Per/pc.MV-6/4” ET KVS: 9.5 Per/pc.
18851886
TVV DN25 1” ET Per/pc.TVV DN40 6/4” ET Per/pc.
2-way motor valve 1“ ITWith spring-loaded return, synchronised motor 230 V closed without current,max. differential pressure: 0.9 bar, temp.: +5 °C to +110 °C. 1 inlet, 1 outlet.Opens or closes for the flow of the medium according to demand.
1653 MVA-1“ IT KVS: 9 Per/pc.
1889 TMV DN40 6/4”ET Per/pc.
89.-
97.-221.-
228.-270.-
90.-
390.-
Thermostatic mixing valve DN 25 incl. insulationThe thermostatic mixing valve ensures a constant supply temperature to thefresh water module. Control range 20 - 70 °C. Optimum use with fresh watermodules up to 40 l/min. Incl. backflow inhibitor in cold water and DHW feed.
1887 TTMV DN25 1” ET Per/pc. 172.-
E-mail: [email protected] l www.solarfocus.eu
makes you independent
42
Buffer tank with solar coil
122012211222
122301224
PSR 500 Without insulation Ø 650 x 1621 mmPSR 800 Without insulation Ø 790 x 1685 mmPSR 1000 Without insulation Ø 790 x 2040 mmPSR 1250 Without insulation Ø 950 x 2016 mmPSR 1500 Without insulation Ø 1000 x 2050 mm
Buffer tank connection DN40With connection 6/4” ET, maximum operating pressure 3 bar
1845 PV per pc.
Buffer tank with solar coilMade from sheet steel S235JR, painted on the outside. The storage tanks aresuitable for storing heating water. With a welded-in bare-tube coil for solar charging.Max. operating pressure, buffer: 3 bar. Max. operating pressure, coil: 10 bar.Max. operating temperature: 95 °C.
702.-820.-938.-
1164.-1454.-
74.-
Connection sockets with
internal threads
Buffer tank with solar coil
Buffer tank connection hose
Contents A B C D d E F G I J K L M N P HS HG 1* 2* 3* 4*litres mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm m2 m2 kg mm
500 —- 211 211 850 650 651 721 —- —- 971 —- 1381 —- —- —- 1621 1700 —- 1.8 103 1670
800 —- 256 256 990 790 626 801 —- —- 1026 —- 1426 —- —- —- 1685 1760 —- 2.4 130 1740
1000 —- 300 300 990 790 844 970 —- —- 1249 —- 1720 —- —- —- 2040 2090 —- 3.0 156 2090
1250 —- 300 300 1200 950 784 970 —- —- 1239 —- 1700 —- —- —- 2016 2100 —- 3.0 189 2090
1500 —- 312 312 1250 1000 862 962 —- —- 1247 —- 1712 —- —- —- 2050 2125 —- 3.0 210 2110
1* Upper heating coil (m2) 2* Lower heating coil (m2) 3* Weight (kg) 4* Tilted height without insulation (mm)
Price list 2013
IMPORTANT: Please advise when ordering if an immersion heater will be used and,
if so, to which 6/4” connection it should be fitted.
43
3
Stratified buffer tank with 2 solar coils
Stratified buffer tank with 2 solar coils
Stratified buffer tank with 2 solar coilsMade from sheet steel S235JR, painted on the outside. The storage tanks aresuitable for storing heating water. Inside the Buffer tank: stratified charging unit in the heating return, stratifiedseparation plate, raised pipe bends for better storage utilisation, and settlingchambers at the inlets and outlets facilitate optimum temperature distribution.This high-tech construction guarantees the right stratification when chargingand discharging the Buffer tank. With two welded-in bare-tube coils for solarcharging.Max. operating pressure, buffer: 3 bar. Max. operating pressure, coil: 10 bar.Max. operating temperature: 95 °C.
Buffer tank connection hose
Connection sockets with
internal threads
Contents A B C D d E F G I J K L M N P HS HG 1* 2* 3* 4*litres mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm m2 m2 kg mm
500 —- 211 211 900 650 651 721 821 981 971 1381 1381 —- 420 1190 1621 1700 1.2 1.8 131 1670
800 —- 256 256 990 790 626 801 866 1026 1026 1386 1426 —- 441 1226 1685 1760 1.6 2.4 169 1740
1000 —- 300 300 990 790 844 970 1040 1180 1249 1720 1720 —- 567 1479 2040 2090 2.4 3.0 204 2090
1050 —- 310 310 990 790 844 980 1094 1215 1375 1755 1910 —- 567 1500 2041 2200 2.4 3.0 209 2170
1250 —- 300 300 1200 950 784 970 1085 1160 1239 1700 1700 —- 550 1470 2016 2100 2.4 3.0 240 2090
1500 —- 312 312 1250 1000 862 962 1090 1202 1247 1712 1712 —- 572 1487 2050 2125 2.4 3.0 254 2110
1* Upper heating coil (m2) 2* Lower heating coil (m2) 3* Weight (kg) 4* Tilted height without insulation (mm)
E-mail: [email protected] l www.solarfocus.eu
12120-2R12121-2R12122-2R12222-2R12123-2R12124-2R
SPS-2R 500 Without insulation Ø 650 x 1621 mmSPS-2R 800 Without insulation Ø 790 x 1685 mmSPS-2R 1000 Without insulation Ø 790 x 2040 mmSPS-2R 1050 Without insulation Ø 790 x 2170 mmSPS-2R 1250 Without insulation Ø 950 x 2015 mmSPS-2R 1500 Without insulation Ø 1000 x 2050 mm
890.-922.-
1025.-1135.-1415.-1745.-
makes you independent
44
Buffer tank without solar coil
Buffer tank/stratified buffer tank without solar coil
Buffer tank without solar coilMade from sheet steel S235JR, painted on the outside. The storage tanks aresuitable for storing heating water. Max. operating pressure, buffer: 3 bar. Max. operating pressure, coil: 10 bar.Max. operating temperature: 95 °C.
123012311232
12330
12341235123612371238
PS-500 Ø 650 x 1621 mmPS-800 Ø 790 x 1685 mmPS-1000 Ø 790 x 2040 mmPS-1250 Ø 950 x 2015 mm
PS-1500 Ø 1000 x 2050 mmPS-2100 Ø 1100 x 2376 mmPS-3000 Ø 1250 x 2644 mmPS-4000 Ø 1400 x 2818 mmPS-5000 Ø 1600 x 2880 mm
From 1500 l, please note there is a lead time of approx. 5 weeks!
475.-611.-701.-882.-
1108.-1538.-2383.-2891.-3854.-
IMPORTANT: Please advise when ordering if an immersion heater will be used and,
if so, to which 6/4” connection it should be fitted.
Price list 2013
Buffer tank connection hose
Connection sockets with
internal threads
Contents A B C D d E F G I J K L M N P HS HG 1* 2* 3* 4*litres mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm m2 m2 kg mm
500 —- —- 211 850 650 651 —- 821 —- 971 —- 1381 —- 420 1190 1621 1700 —- —- 79/90 1670
800 —- —- 256 990 790 626 —- 866 —- 1026 —- 1426 —- 441 1226 1685 1760 —- —- 97/112 1740
1000 —- —- 300 990 790 844 —- 1040 —- 1249 —- 1720 —- 567 1479 2040 2090 —- —- 114/132 2090
1050 —- —- 310 990 790 844 —- 1094 —- 1375 —- 1910 —- 567 1500 2141 2200 —- —- —-/126 2170
1250 —- —- 300 1200 950 784 —- 1085 —- 1239 —- 1700 —- 550 1470 2015 2100 —- —- 146/162 2090
1500 —- —- 312 1250 1000 862 —- 1090 —- 1247 —- 1712 —- 572 1487 2050 2125 —- —- 163/182 2110
2100 —- —- 325 1350 1100 959 —- 1214 —- 1489 —- 2025 —- 645 1780 2376 2450 —- —- 225/—- 2450
3000 —- —- 350 1500 1250 950 —- 1465 —- 1700 —- 2250 —- 560 1900 2644 2720 —- —- 280/—- 2705
4000 —- —- 487 1650 1400 1087 —- 1637 -- 1837 —- 2387 —- 690 2040 2818 2895 —- —- 431/—- 2910
5000 —- —- 540 1850 1600 1120 —- 1645 —- 1770 —- 2400 —- 740 1970 2880 2955 —- —- 501/—- 3010
1* Upper heating coil (m2) 2* Lower heating coil (m2) 3* Weight (kg) 4* Tilted height without insulation (mm)
45
3
E-mail: [email protected] l www.solarfocus.eu
Insulation for buffer tank and stratified buffer tank
Insulation for buffer tank and stratified buffer tank with and without coilFlexible foam insulation up to 1050 litres: 100 mm, from 1250 litres: 125 mm.With synthetic leather cover. Colour: RAL 9006 grey
Stratified buffer tank without solar coil
Stratified buffer tank without solar coilMade from sheet steel S235JR, painted on the outside. The storage tanks aresuitable for storing heating water. Inside the Buffer tank: stratified charging unit in the heating return, stratifiedseparation plate, raised pipe bends for better storage utilisation, and settlingchambers at the inlets and outlets facilitate optimum temperature distribution.This high-tech construction guarantees the right stratification when chargingand discharging the Buffer tank.Max. operating pressure, buffer: 3 bar. Max. operating pressure, coil: 10 bar.Max. operating temperature: 95 °C.
Buffer tank connection hose
Connection sockets with
internal threads
310500310800311000311050311250311500312000313000314000315000
WS 500 Ø 850 x 1700 mmWS 800 Ø 990 x 1760 mmWS 1000 Ø 990 x 2090 mmWS 1050 Ø 990 x 2200 mmWS 1250 Ø 1200 x 2100 mmWS 1500 Ø 1250 x 2125 mmWS 2100 Ø 1350 x 2450 mmWS 3000 Ø 1500 x 2720 mmWS 4000 Ø 1650 x 2895 mmWS 5000 Ø 1850 x 2955 mm
276.-324.-420.-475.-520.-634.-783.-885.-970.-
1088.-
121301213112132122321213312134
SPS-500 Ø 650 x 1621 mmSPS-800 Ø 790 x 1685 mmSPS-1000 Ø 790 x 2040 mmSPS-1050 Ø 790 x 2141 mmSPS-1250 Ø 950 x 2015 mmSPS-1500 Ø 1000 x 2050 mm
620.-685.-795.-900.-
1070.-1235.-
makes you independent
46
Technical data, fresh water modules
Fresh water technologyFresh water technology refers to the heating of DHWusing the flow method. This means there is no need tostore large volumes of hot water, yet completely hygienicDHW can be provided.
External preparation with fresh water modulesFresh water modules transfer heat from a buffer tank tothe DHW flowing through them with the help of a heatexchanger. The DHW temperature can be set as required and ismaintained at a constant level via an electronic controller.Only the quantity of DHW you require at the exact momentflows through the fresh water module.
TIP: Install the fresh water module as close as possible to the buffer tank in order to avoid energy losses.
Flow rate/heat pumpat 50 °C buffer flow
FWM 26 FWM 40 FWM 50 FWM 63 FWM 75 FWM 95 FWM 26 FWM 40 FWM 50 FWM 63 FWM 75 FWM 95
Buffer flow °C 60 60 60 60 60 60 50 50 50 50 50 50
Cold water inlet °C 10 10 10 10 10 10 10 10 10 10 10 10
DHW outlet °C 45 45 45 45 45 45 45 45 45 45 45 45
DHW outlet l/min 26 40 50 63 75 95 15 25 34 46 51 65
Return temp. to buffer °C 21 21 21 21 21 21 21 21 21 21 21 21
Max. output kW 60 84 130 157 180 230 37 61 98 120 139 181
Electr. power supply V 230 230 230 230 230 230 230 230 230 230 230 230
Connections 3/4” IT 3/4” IT 1” IT 1” IT 5/4” IT 5/4” IT 3/4” IT 3/4” IT 1” IT 1” IT 5/4” IT 5/4” IT
Circulation conn. 3/4” IT 3/4” IT 1” IT 1” IT 1” IT 1” IT 3/4” IT 3/4” IT 1” IT 1” IT 1” IT 1” IT
Height mm 770 770 960 960 1130 1130 770 770 960 960 1130 1130
Width mm 330 330 370 370 440 440 330 330 370 370 440 440
Depth mm 350 350 510 510 630 630 350 350 510 510 630 630
Weight kg 15 20 38 50 60 85 15 20 38 50 60 85
Flow Cold water inlet DHW outlet l/min Output Connections Circulation H/W/D mm Weight/kg
FWM 150 60 °C 10 °C 45 °C 150 390 kW 6/4” IT 5/4” IT 1050/900/450 135
FWM 250 60 °C 10 °C 45 °C 250 650 kW 2” IT 5/4” IT 1050/1200/500 150
FRESH WATERSYSTEM
Price list 2013
47
A) A)B) B)
4
Stratified charging technologyExternal stratified charging modulesare used in solar thermal systemsthat are larger than 20 m2.
Mode of operation:Stratified charging modulestransfer the energy generated bythe solar thermal system to theheating water flowing through thebuffer tank with the help of externalheat exchangers. The solar control determines whicharea of the buffer will be the bestlocation for stratifying the energyproduced by the solar thermalsystem.
Solar stratified charging module Solar stratified charging module with fast char-ging mode also suitable for two buffer stores
SLM 20 SLM 40 SLM 60 SLM 80 SLM 100 SLM 150
SLMHE 20 SLMHE 40 SLMHE 60 SLMHE 80 SLMHE 100 SLMHE 150
Collector area m2 Up to 20 Up to 40 Up to 60 Up to 80 Up to 100 Up to 150
Power kW Up to 10 Up to 20 Up to 30 Up to 40 Up to 50 Up to 65
SLM - primary pump 15/7 15/7 15/11 15/11 25/13 25/13
SLM - secondary pump 15/4 15/4 15/6 15/6 25/7 25/7
SLMHE - primary pump Para 15/1-7 15/1-7 15/1-11.5 15/1-11.5 25/1-11 25/1-11
SLMHE - secondary pump Para 15/1-7 15/1-7 15/1-7 15/1-7 25/1-7 25/1-7
Buffer/solar connections 3/4” IT 3/4” IT 1” IT 1” IT 1” IT 1” IT
H/W/D 770/330/350 770/330/350 960/370/510 960/370/510 1130/440/630 1130/440/630
Weight kg Approx. 25 Approx. 30 Approx. 45 Approx. 55 Approx. 65 Approx. 85
Technical data, stratified charging modules
E-mail: [email protected] l www.solarfocus.eu
makes you independent
TIP:
The solar stratified charging module with fast charging mode
should preferably be used for systems where the collector area
is relatively small in relation to the Buffer tank volume or where
there are 2 or more buffer stores.
48
*
*
*
Fresh water module – without circulation Hygienic DHW preparation via generously dimensioned stainless steel plate heat exchangers using the flow-through principle. The fresh water module is used where low return temperatures aredesired. The electronic control regulates the system so that a constant DHWtemperature can be achieved with varying flow temperatures and varyingvolumetric flows. Optimum stratification of the heating water in the buffer tankthrough use of a speed-controlled pump and an ultra-fast PT 1000 sensor.Power supply: 230 V, complete with controller and flushing unit, installed andwired on a mounting panel. All connections for fitting a circulation connectionset are included. Conforms to DVGW (German Technical and ScientificAssociation for Gas and Water) regulations.
118161118162118163118164118165
FWM 26 26 l/min 3/4”, incl. electr. separation Per pc.FWM 40 40 l/min 3/4”, incl. electr. separation Per pc.FWM 50 50 l/min 1” Per pc.FWM 75 75 l/min 5/4” Per pc.FWM 95 95 l/min 5/4” Per pc.
Fresh water module – electronically controlled with andwithout high-efficiency pump
1495.- 1890.- 2861.- 4941.-5500.-
NOTE:
Fresh water modules with a flow rate of
50 l and above: lead time approx. 4 weeks
IMPORTANT:
A water quality test must be performed
prior to installation. If the water’s
electrical conductivity exceeds the limit
value, a stainless steel/nickel soldered
plate heat exchanger must be used.
Request the data sheet on water quality
for more information!
Modules for higher flow rates with
stainless steel/nickel soldered plate heat
exchangers are available on request.
Fresh water module with high-efficiency pump – without circulation Hygienic DHW preparation via generously dimensioned stainless steel plateheat exchangers using the flow-through principle. The fresh water module isused where low return temperatures are desired. The electronic controlregulates the system so that a constant DHW temperature can be achieved withvarying flow temperatures and varying volumetric flows. Optimum stratificationof the heating water in the buffer tank through use of a speed-controlled high-efficiency pump and an ultra-fast PT 1000 sensor. Power supply: 230 V,complete with controller and flushing unit, installed and wired on a mountingpanel. All connections for fitting a circulation connection set are included. Conforms to DVGW (German Technical and Scientific Association for Gasand Water) regulations.
Fresh water module with high-efficiency pump – without circulation,with stainless steel/nickel soldered plate heat exchanger Hygienic DHW preparation via generously dimensioned stainless steel/nickelsoldered plate heat exchangers using the flow-through principle. The freshwater module is used where low return temperatures are desired. The electroniccontrol regulates the system so that a constant DHW temperature can beachieved with varying flow temperatures and varying volumetric flows. Optimumstratification of the heating water in the buffer tank through use of a speed-controlled high-efficiency pump and an ultra-fast PT 1000 sensor. Power supply:230 V, complete with controller and flushing unit, installed and wired ona mounting panel. All connections for fitting a circulation connection set areincluded. Conforms to DVGW (German Technical and Scientific Associationfor Gas and Water) regulations.
FRESH WATERSYSTEM
Price list 2013High-efficiency pump HE: Water quality according to ÖNORM H 5195-1 or VDI Guideline 2035.
Also: The medium must be free of air and sludge!
118261118262118263118264118265118266
FWM 26 HE 26 l/min 3/4”, incl. electr. separation Per pc.FWM 40 HE 40 l/min 3/4”, incl. electr. separation Per pc.FWM 50 HE 50 l/min 1” Per pc.FWM 63 HE 63 l/min 1” Per pc.FWM 75 HE 75 l/min 5/4” Per pc.FWM 95 HE 95 l/min 5/4” Per pc.
1740.- 2095.- 3120.- 4416.- 5295.-5845.-
118161E118162E118261E118262E
FWME 26 26 l/min 3/4”, incl. electr. separationPer pc.FWME 40 40 l/min 3/4”, incl. electr. separationPer pc.FWME 26 HE 26 l/min 3/4”, incl. electr. separationPer pc.FWME 40 HE 40 l/min 3/4”, incl. electr. separationPer pc.
1945.- 2440.- 2228.- 2645.-
NOTE: A thermal mixing valve must be installed for fresh
water modules HE!
49*
*
*
4
Fresh water module with high-efficiency pump – without circulation pump Stand-alone module for hygienic DHW preparation via generously dimensionedstainless steel plate heat exchangers using the flow-through principle. The freshwater module is used where low return temperatures are desired. The electroniccontrol regulates the system so that a constant DHW temperature can beachieved with varying flow temperatures and varying differential pressures.Optimum stratification of the heating water in the buffer tank through use ofa speed-controlled pump and an ultra-fast PT 1000 sensor. Power supply:230 V, complete with controller and flushing unit, installed and wired ona mounting panel. All connections for fitting a circulation connection set areincluded. Regulated via 0 - 10 V control signal. Conforms to DVGW(German Technical and Scientific Association for Gas and Water) regulations.
Circulation connection set with flushing unitCirculation pump set for installation in the fresh water module (time and temperature-controlled). Conforms to DVGW (German Technical and Scientific Association for Gasand Water) regulations. Power supply via controller 230 V
Cover Attractive cover plate, incl. installation and fixing materials.
118155118158
AFM For FWM 50, 63 + SLM 60, 80 Per pc.AFM For FWM 75, 95 + SLM 100, 150 Per pc.
EPP cover Attractive cover made of EPP with high mechanical and thermal strength (-40 to +110 °C) and low thermal conductivity.
118152 AFMEPP For FWM 26, 40 + SLM 20, 40 Per pc.
INFO:
Please contact us if you require fresh
water modules with higher flow rates!
TIP: Install a thermostatic mixing valve part no. 1887, 1889 to avoid scaling of
the fresh water heat exchanger.
Thermal mixing valve (from FWM 50)Consisting of: 3-way mixing valve, temperature controller, with 2 m contactsensor (50 to 80 °C), threaded nozzles 1” or 6/4” (1 set = 3 pcs.). 2 inlets,1 outlet. As it flows through the valve, the medium is mixed depending onthe position of the valve disc.
1889 TMV DN40 6/4” ET Per pc. 390.-
133.-144.-
127.-
Thermostatic mixing valve DN 25 incl. insulation (up to FWM 40)The thermostatic mixing valve ensures a constant supply temperature to thefresh water module. Control range 20 - 70 °C. Optimum use with fresh watermodules. Incl. backflow inhibitor in cold water and DHW feed.
Insulation setCorrosion protection for DHW tanks and fresh water modules. Must be installed in the solar flow/return for ribbed-tube heat exchangers andfor FWM in mixed installations in the DHW area for the cold and hot waterflow and for the circulation.
Part no.:
Part no.: 118141
Part no.:
NOTE: When using circulation,
a sanitary expansion vessel
part no. 1552 must also be used!
1887 TTMV DN25 1” ET Per pc. 172.-
E-mail: [email protected] l www.solarfocus.euHigh-efficiency pump HE: Water quality according to ÖNORM H 5195-1 or VDI Guideline 2035.
Also: The medium must be free of air and sludge!
118216118226
118140118142118141118242118243
ZM for FWM 26 and 40 - 3/4” IT Per pc.ZM for FWM 50, 63, 75, 95 - 1” IT Per pc.ZM HE for FWM 26 and 40 - 3/4” IT Per pc.ZM HE for FWM 50, 63, 75, 95 - 1” IT Per pc.ZM HE for FWM 150 and 250 - 5/4” IT Per pc.
FWM 150 HE Stand-alone module, flow rate 150 l/min Per pc.FWM 250 HE Stand-alone module, flow rate 250 l/min Per pc.
11,395.-13,990.-
415.-755.- 338.-
1180.-3205.-
1312131713181319
ISO-SET 1“, FWM 50, 63 1 pairISO-SET 5/4“, FWM 75, 95 1 pairISO-SET 6/4“, FWM 150 1 pairISO-SET 2“, FWM 250 1 pair
127.-190.-489.-626.-
makes you independent
50
*
*High-efficiency pump HE: Water quality according to ÖNORM H 5195-1 or VDI Guideline 2035.
Also: The medium must be free of air and sludge!Price list 2013
Solar stratified charging moduleFor the optimum charging of the buffer tank in two levels. Complete withcontroller (230 V AC), PT 1000 sensors, motor switching valve, generouslydimensioned stainless steel plate heat exchanger. Primary and secondarypumps are speed-controlled. Wired. Ready to plug in. Primary: flush/fill tap, non-return valve, safety group 6 bar, connections forexpansion vessel, both circuits manually controllable via adjustable valve.Max. operating pressure 6 bar. Operating temperature max. 95 °C, min. 2 °C.
Solar stratified charging module with high-efficiency pumps Speed-controlled high-efficiency primary and secondary pump. Ready to plug in.For the optimum charging of the buffer tank in two levels. Complete withcontroller (230 V AC), PT 1000 sensors, motor switching valve, generouslydimensioned stainless steel plate heat exchanger. Primary and secondarypumps are speed-controlled. Wired. Ready to plug in. Primary: flush/fill tap, non-return valve, safety group 6 bar, connections forexpansion vessel, both circuits manually controllable via adjustable valve.Max. operating pressure 6 bar. Operating temperature max. 95 °C, min. 2 °C.
Solar stratified charging module
119131119132119133119134119135119136
SLM 20 Up to 20 m2 collector area Per pc.SLM 40 Up to 40 m2 collector area Per pc.SLM 60 Up to 60 m2 collector area Per pc.SLM 80 Up to 80 m2 collector area Per pc.SLM 100 Up to 100 m2 collector area Per pc.SLM 150 Up to 150 m2 collector area Per pc.
119231119232119233119234119235119236
SLMHE 20 Up to 20 m2 collector area Per pc.SLMHE 40 Up to 40 m2 collector area Per pc.SLMHE 60 Up to 60 m2 collector area Per pc.SLMHE 80 Up to 80 m2 collector area Per pc.SLMHE 100 Up to 100 m2 collector area Per pc.SLMHE 150 Up to 150 m2 collector area Per pc.
1816.- 2080.- 3120.-3706.-3980.-6809.-
2412.- 2671.- 3674.-4260.-4640.-7470.-
Electronic heat meterWith integrated temperature sensor and electronic flow measurement forinstallation in the solar circuit (measurement of the medium temperature from0 to 125 °C). Incl. adapters 1/2“ IT to 3/4“ ET and 3/4“ IT to 1“ ET. The controlfunction is activated when the heat meter is connected. Can be used fromcontrol version 5.0. Can only be used in conjunction with the solar stratifiedcharging module. Measuring accuracy: ± 0.3 K ± 0.005°T
119144119145
WMZ 2 - 32 l/min up to 40 m² - 1/2 on 3/4“ ET Per pc.WMZ 4 - 50 l/min up to 150 m2 - 3/4 on 1 “ ET Per pc.
132.-144.-
NOTE:
Heat meter not included in the scope
of delivery
51
*
*
4
NOTE:
The expansion vessel for your solar and
heating system has to be ordered separately!
NOTE:
Stratified charging module from 40 m2,
lead time approx. 4 weeks
Solar stratified charging module with fast charging mode
Solar stratified charging module with fast charging modeFor the optimum charging of the buffer tank in two levels. With 2 integratedmotor switching valves allowing for the fast charge of the upper buffer tanklevel. Complete with control (230 V AC), PT 1000 sensors, 2 motor switchingvalves, generously dimensioned stainless steel plate heat exchanger. Primaryand secondary pumps are speed-controlled. Ready to plug in. Primary: flush/fill tap, non-return valve, safety group 6 bar, connections forexpansion vessel, both circuits manually controllable via adjustable valve.Max. operating pressure 6 bar. Operating temperature max. 95 °C, min. 2 °C.
Solar stratified charging module with fast charging mode and high-efficiencypumps Speed-controlled high-efficiency primary and secondary pump. Ready to plug in.For the optimum charging of the buffer tank in two levels. With 2 integrated motorswitching valves allowing for the fast charge of the upper buffer tank level. Complete withcontrol (230 V AC), PT 1000 sensors, 2 motor switching valves, generously dimensionedstainless steel plate heat exchanger. Primary and secondary pumps are speed-controlled. Ready to plug in. Primary: flush/fill tap, non-return valve, safety group 6 bar,connections for expansion vessel, both circuits manually controllable via adjustable valve.Max. operating pressure 6 bar. Operating temperature max. 95 °C, min. 2 °C.
119131S119132S119133S119134S119135S119136S
SLMS 20 Up to 20 m2 collector area Per pc.SLMS 40 Up to 40 m2 collector area Per pc.SLMS 60 Up to 60 m2 collector area Per pc.SLMS 80 Up to 80 m2 collector area Per pc.SLMS 100 Up to 100 m2 collector area Per pc.SLMS 150 Up to 150 m2 collector area Per pc.
119231S119232S119233S119234S119235S119236S
SLMSHE 20 Up to 20 m2 collector area Per pc.SLMSHE 40 Up to 40 m2 collector area Per pc.SLMSHE 60 Up to 60 m2 collector area Per pc.SLMSHE 80 Up to 80 m2 collector area Per pc.SLMSHE 100 Up to 100 m2 collector area Per pc.SLMSHE 150 Up to 150 m2 collector area Per pc.
2261.- 2513.- 3626.-4202.-4702.-7488.-
2812.- 3064.- 4172.-4748.-5258.-8137.-
Cover Attractive cover plate, incl. installation and fixing materials.
118155118158
AFM For FWM 50, 63 + SLM 60, 80 Per pc.AFM For FWM 75, 95 + SLM 100, 150 Per pc.
EPP cover Attractive cover made of EPP with high mechanical and thermal strength (-40 to +110 °C) and low thermal conductivity.
118152 AFMEPP For FWM 26, 40 + SLM 20, 40 Per pc.
133.-144.-
127.-
Part no. 118152
Part no. 118155
E-mail: [email protected] l www.solarfocus.euHigh-efficiency pump HE: Water quality according to ÖNORM H 5195-1 or VDI Guideline 2035.
Also: The medium must be free of air and sludge!
makes you independent
52
*
*
*
*
NOTE:
For systems larger than 60 m2,
the expansion vessel needs to
be calculated. Static height,
system pressure and volume of the
solar circuit are to be taken into
account in the calculation.
NOTE:
When using
circulation, a sanitary
expansion vessel part
no. 1552
must be used on the
DHW/circulation pipe.
(This is due to a new
DVGW guideline!)
NOTE:
Observe the ErP Directive!
Part no.: 1526
Part no.: 15771578
Part no.: 15301531
Solar pumps
Return flow pump set DN 25 with insulation and flow regulator 2-14 l/minFor additional solar circuit, boiler or buffer charging. Consisting of: pump,flow regulator, non-return valve, 2 ball valves, thermometer and EPP insulation.Connection: compression fitting Ø 22 mm
152215221
RLS-ID With EST 25/6 130 mm RLS-IDHEP With Para 25/1-7 130 mm
Return flow pump set DN 25 or DN 32For additional solar circuit, boiler or buffer charging. Consisting of: pump, non-return valve, 2 ball valves and thermometer.
DHW pump setFor boiler charging from an external heat exchanger, brass/stainlesssteel pump, incl. pump fittings, non-return valve and 2 ball valves
Solar expansion vesselPre-pressure: 2.5 bar; max. temperature: -10/+100 °C; max. membrane load temperature: +70 °C; max. operating pressure: 10 bar; connection: up to 50 l 3/4“ ET; from 80 l 1“ET;adjustable feet for sizes above 50 litres.
1526
15261
1577
1578
1579
RLS-I-25/7 With EST 25/7-130 with insulation andflow regulator 7-30 l/min, conn.:1” ETRLS-I With Para 25/1-7-130 with insulation and flow regulator 7-30 l/min, conn.:1” ETRLS-S 25/7 With TOP-S 25/7-180 without flow regulator, conn.:1” ITRLS-S-32/7 With TOP-S 30/7-180without flow regulator, conn.:5/4” ITRLS-S-32/10 With TOP-S 30/10-180without flow regulator, conn.:5/4” IT
15301531
TWS-Z20 1/2“ Up to 20 m2 collector areaTWS-Z30 5/4“ Up to 70 m2 collector area
1540-181540-251540-331540-501540-80
1540-1001540-1401540-2501540-3001540-4001540-5001540-600
ADG-18 Collector area Up to 5 m2
ADG-25 Collector area Up to 7 m2
ADG-33 Collector area Up to 13 m2
ADG-50 Collector area Up to 17 m2
ADG-80 Collector area Up to 22 m2
ADG-100 Collector area Up to 30 m2
ADG-140 Collector area Up to 40 m2
ADG-250 Collector area Up to 60 m2
ADG-300 Calculation requiredADG-400 Calculation requiredADG-500 Calculation requiredADG-600 Calculation required
Pump set IMPORTANT: Staged pumps only available whilst stocks last!
250.-521.-
306.-
538.-
531.-
680.
758.-
307.-751.-
49.-55.-88.-
168.-240.-289.-490.-788.-
1067.-1385.-1579.-1897.-
High-efficiency pump HE: Water quality according to ÖNORM H 5195-1 or VDI Guideline 2035.Also: The medium must be free of air and sludge!Price list 2013
15071508151115151520151615171518
15060
EST 25/6-130 11/2” ET; installation length 130 mmEST 25/7-130 11/2” ET; installation length 130 mmEST 25/6-180 11/2” ET; installation length 180 mmEST 25/7-180 11/2” ET; installation length 180 mmTOP-S 25/7-180 11/2” ET; installation length 180 mmTOP-S 30/7-180 2” ET; installation length 180 mmTOP-S 30/10-180 2” ET; installation length 180 mmPara 25/1-7 6/4” ET; installation length 130 mmPara 25/1-11 6/4” ET; installation length 130 mm
113.-135.-113.-135.-354.-408.-528.-607.-665.-
53
*
*
*
*
*
5
NOTE:
m2 values are for guidance only and
depend on the type and
dimensions of the pipework.
SOLARFOCUS will be pleased
to support you when designing
the system.
NOTE:
Pump group sets with integrated air
separator should preferably be used
with stainless steel corrugated pipe
connections.
NOTE:
If pump group sets DN 25 need to be
connected to flat-seal connections,
use part no. 1533 (see page 59)!
This is the case, for example,
if connecting directly to a stainless
steel corrugated pipe.
Pump group set DN 25 with insulation, flow regulator 2-14 l/min andexpansion vessel Pump, 2 gravity brakes, safety valve, manometer and2 x thermometer, with service coupling for expansion vessel,armoured hose, wall mounting, flush and fill tap, connection: clamping ring DM 22 mm. H/W = 375/250 mm
Pump group set DN 25 with insulation, flow regulator 7-30 l/min andexpansion vesselPump, 2 gravity brakes, safety valve, manometer and2 x thermometer, with service coupling for expansion vessel,flush and fill tap, connection: 1“ ET, H/W = 375/250 mm
150211502315024151211512315124
PGS-I-80 Expansion vessel 80 L - EST 25/7-130 Up to 22 m2
PGS-I-100 Expansion vessel 100 L - EST 25/7-130 Up to 30 m2
PGS-I-140 Expansion vessel 140 L - EST 25/7-130 Up to 40 m2
PGSH-I-80 Expansion vessel 80 L - Para 25/1-7-130 Up to 22 m2
PGSH-I-100 Expansion vessel 100 L - Para 25/1-7-130 Up to 30 m2
PGSH-I-140 Expansion vessel 140 L - Para 25/1-7-130 Up to 40 m2
Pump group set DN 32 with insulation WITHOUT expansion vessel,without service couplingPump, 2 gravity brakes, safety valve, manometer and 2 x thermometer, flat-seal connection 1” for expansion vessel, connections 5/4” IT, H/W = 440/250 mm
1501015011150151501615110151111511315114
PGS-ID-18 Expansion vessel 18 L - EST 25/6-130 Up to 5 m2
PGS-ID-25 Expansion vessel 25 L - EST 25/6-130 Up to 7 m2
PGS-ID-33 Expansion vessel 33 L - EST 25/7-130 Up to 13 m2
PGS-ID-50 Expansion vessel 50 L - EST 25/7-130 Up to 17 m2
PGSH-ID-18 Expansion vessel 18 L - Para 25/1-7-130 Up to 5 m2
PGSH-ID-25 Expansion vessel 25 L - Para 25/1-7-130 Up to 7 m2
PGSH-ID-33 Expansion vessel 33 L - Para 25/1-7-130 Up to 13 m2
PGSH-ID-50 Expansion vessel 50 L - Para 25/1-7-130 Up to 17 m2
IMPORTANT: When using stainless steel double corrugated piping, the increased
pressure loss must be taken into consideration! See page 59 – pressure loss diagram
682.-732.- 929.- 955.-
1004.-1202.-
413.-419.-452.-533.-684.-692.-723.-805.-
Pump group set DN 25 with insulation, flow regulator 2-14 l/min,expansion vessel and integrated air separatorPump, 2 gravity brakes, safety valve, manometer and2 x thermometer, with service coupling for expansion vessel,armoured hose, wall mounting, flush and fill tap, connection: clamping ring DM 22 mm. H/W = 375/250 mm
E-mail: [email protected] l www.solarfocus.euHigh-efficiency pump HE: Water quality according to ÖNORM H 5195-1 or VDI Guideline 2035.
Also: The medium must be free of air and sludge!
1503015031 15130
PGS-I With TOP-S 30/7 Up to 80 m2
PGS-I With TOP-S 30/10 Up to 120 m2
PGS-I-HE With Para 1-12 Up to 120 m2
1218.-1281.-1790.-
1541015411154151541615510155111551315514
PGSL-ID-18 Expansion vessel 18 L - EST 25/7-130 Up to 5 m2
PGSL-ID-25 Expansion vessel 25 L - EST 25/7-130 Up to 7 m2
PGSL-ID-33 Expansion vessel 33 L - EST 25/7-130 Up to 13 m2
PGSL-ID-50 Expansion vessel 50 L - EST 25/7-130 Up to 17 m2
PGSHL-ID-18 Expansion vessel 18 L - Para 25/1-7-130 Up to 5 m2
PGSHL-ID-25 Expansion vessel 25 L - Para 25/1-7-130 Up to 7 m2
PGSHL-ID-33 Expansion vessel 33 L - Para 25/1-7-130 Up to 13 m2
PGSHL-ID-50 Expansion vessel 50 L - Para 25/1-7-130 Up to 17 m2
451.-457.-490.-571.-711.-719.-750.-832.-
makes you independent
54
16860 MKS-3 Triple-circuit solar control
Solar control
16800 ES Single-circuit solar control
16850 MKS-2 Double-circuit solar control
16820 ES-Simpel Single-circuit solar control
16810 HYG single-circuit controlNOTE:
Menu navigation for all
solar controls is available in
various languages!
Operating manual at:
www.solarfocus.eu
Triple-circuit solar controlLarge display showing all important details in symbol and text form. Each featuresa difference, minimum and maximum function, starting function, functional systemcheck, basic heat volume measurement and stratified charging programme. For speed-controlled operation or a stratified charging programme, use a flowvolume sensor part no. 16390 to measure the volume of heat. User-programmable timer switch. 6 sensor inputs, 1 output with switchable speedcontrol; 2 relay outputs and data cable.Supplied with 5 PT 1000 Buffer tank sensors, 4 immersion sleeves 1/2” x 140 mm,power cord and installation material. Without collector sensor! Included in part no. 10090 solar thermal system connection set.
Single-circuit solar controlFor heating and DHW systems, large display showing all important details in symboland text form. Each features a difference, minimum and maximum function, startingfunction, stratified tank charging programme, charging programme, functional systemcheck and basic heat volume measurement. For speed-controlled operation ora stratified charging programme, use a flow volume sensor part no. 16390 tomeasure the volume of heat. 3 sensor inputs, 1 triac output. Supplied with 2 PT 1000 Buffer tank sensors, 2 immersion sleeves 1/2” x 140 mm,power cord and installation material. Without collector sensor! Included in part no. 10090 solar thermal system connection set.
Double-circuit solar controlLarge display showing all important details in symbol and text form. Each featuresa difference, minimum and maximum function, starting function, functional systemcheck and basic heat volume measurement. Stratified charging programme. For speed-controlled operation or a stratified charging programme, use a flowvolume sensor part no. 16390 to measure the volume of heat. User-programmable timer switch.6 sensor inputs, 1 output with switchable speed control; 2 relay outputs anddata cable. Supplied with 4 PT 1000 Buffer tank sensors, 3 immersion sleeves 1/2”x 140 mm, power cord and installation material. Without collector sensor! Included in part no. 10090 solar thermal system connection set.
“Simple” single-circuit solar controlFor DHW and swimming pool solar thermal systems, large display showing allimportant details in symbol and text form. Each features a difference, minimum andmaximum function, starting function, functional system check and heat volumemeasurement, but NO speed control and NO stratified tank charging programme.3 sensor inputs, 1 relay output.Supplied with 1 PT 1000 Buffer tank sensor, 1 immersion sleeve 1/2” x 140 mm, power cord and installation material. Without collector sensor!
“Hygiene” controlFor hygienic DHW preparation with fresh water heat exchanger (part no.: 1320),large display showing all important details in symbol and text form. Each featuresa difference, minimum and maximum function, starting function, speed control andfunctional system check. 3 sensor inputs, 1 triac output, speed-controlled.Supplied with ultra-fast sensor and flow switch for hygienic DHW preparation,1 PT 1000 Buffer tank sensor, 1 immersion sleeve 1/2” x 140 mm, power cord andinstallation material.
327.-
177.-
304.-
144.-
228.-
Price list 2013
55
6
Solar control
16020 SLC-Solarcomputer
Solar computerApproximately 600 different combinations from various circuit diagrams areavailable for the desired control functions. Incl. starting function. 4 outputs - including 2 with switchable speed control, 4 differentialtemperatures, 6 thermostat thresholds, 3 time windows switchable at eachoutput, data cable. Supplied with 5 PT 1000 Buffer tank sensors, 4 immersionsleeves 1/2” x 140 mm, power cord and installation material. Without collector sensor! This is included in part no.: 10090 solar thermal system connection set.
Control accessories
Heat meterMeasurement tolerance: max. 10%. Automatic anti-freeze compensation! At nominal flow rate. Dp = 0.05; 0.1 or 0.5 bar. Calibration error: 3%. Continuous temperature resistance: 90 °C, short-time: 105 °C; incl. PT 1000 sensor, immersion sleeve 1/2“ ET without flow volume sensor; order part no. 1636, 1637 and 1638 too!
16420 WMZ-1.5
Electronic flow volume sensor 2-50 l/minAccording to the vortex principle with integrated temperature measurement.Signal transmission via data line to the solar controllers. Can withstand up to120 °C temporarily! Can be used from control version 5.0. For heat meteringin conjunction with parts 16800, 16820, 16850 and 16860. NOT suitable forpart no. 16020 and ecomanager or ecomanager-touch!
25.-25.-
19.5015.40
48.-7.509.80
21.-64.-64.-46.-
111.-122.-371.-139.-
368.-
144.-NOTE:
Order part no. 1636, 1637
and 1638 too!
1620-PT1621-PT
1620162116221623162416251630163516341636163716381645
KF-PT PT 1000 collector sensor Ø 5.9 x 20 mm
SF-PT PT 1000 Buffer tank sensor Ø 5.9 x 20 mm
TSKF Collector sensor KTY 81-210/B Ø 5.9 x 19 mm
TSSF Buffer tank sensor KTY 81-210/B Ø 5.9 x 19 mm
TSS „Fast“ sensor 140 mm with 1/2” fitting
TH-140 Immersion sleeve l = 140 mm
TH-300 Immersion sleeve l = 300 mm
TH-140-NIRO Immersion sleeve l = 140 mm stainless steel
SS-DC Flow switch from 2 l/min, 30 V DC
SS-AC Flow switch from 2 l/min, 230 V AC
GBS Radiation sensor
VG 1/2” ET Flow volume sensor, nominal flow: 1.5 m3/h
VG 3/4” ET Flow volume sensor, nominal flow: 2.5 m3/h
VG 5/4” ET Flow volume sensor, nominal flow: 6.0 m3/h
D-LOG USB Interface module for ES 5.0, MKS and SLC
1639016392
VG 1/2” ET 2 - 32 l/min up to 40 m2 Per pc.VG 3/4” ET 4 - 50 l/min up to 150 m2 Per pc.
120.-132.-
E-mail: [email protected] l www.solarfocus.eu
Part no.: 1636, 1637 and 1638
makes you independent
56
1302
1303
1306
1304
1305
1307
1308
1309
Type 18-1 1.8 m2 Ø 170 installation length 440 mm
For flange DN 300 3/4“ x 70 mmType 26-1 2.5 m2 Ø 170 installation length 595 mm
For flange DN 300 3/4“ x 70 mmType 27-2 2.7 m2 Ø 175 installation length 510 mm
For flange DN 300 1” x 110 mmType 36-2 3.6 m2 Ø 175 installation length 650 mm
For flange DN 300 1“ x 110 mmType 45-2 4.6 m2 Ø 175 installation length 790 mm
For flange DN 300 1“ x 110 mmType 18-K 1.8 m2 Ø 100 installation length 530 mm
For flange DN 180 1/2“ x 70 mmType 13-K 1.3 m2 Ø 100 installation length 415 mm
For flange DN 180 1/2“ x 70 mmType 10-K 1.0 m2 Ø 100 installation length 340 mm
For flange DN 180 1/2“ x 70 mm
Ribbed-tube heat exchangerTinned exterior incl. fittings. Only fit in DHW tank with the insulation set!Tip: 1 m² ribbed-tube heat exchanger is sufficient for approx. 4 m² collectorarea!
Flange plate DN 180 “ECOLINE”Outer diameter 180 mm, hole circle diameter 150 mm.
114111427168
FLE-B Blank flange plateFLE-L Flange plate - punched 1/2“ x 70 mmSeal for flange plate DN 180,hole circle diameter 150 mm
Flange gasket DN 300
7502 Seal for flange plate DN 300, hole circle diameter 260 mm, 12 holes
Heat exchanger flange plates
38.-
341.-
439.-
586.-
735.-
889.-
392.-
415.-
402.-
35.-58.-
8.20
Insulation setCorrosion protection for DHW tanks and fresh water modules. Must be installed in the solar flow/return for ribbed-tube heat exchangers andfor FWM in mixed installations in the DHW area for the cold and hot waterflow and for the circulation.
1310131113121318
ISO-SET 1/2“ 1 pairISO-SET 3/4“ 1 pairISO-SET 1“ 1 pairISO-SET 6/4“ 1 pair
97.-108.-127.-489.-
Price list 2013
57
7
Part no.: 1338/1339
Fresh water heat exchangerFor the DHW outlet with counterflow principle using a speed-controlled pump.Connections: 1“ ET.Buffer side: inlet temp.: 50 °C, outlet temp.: 26 °C, flow rate 2000 l/hDHW side: inlet temp.: 10 °C, outlet temp.: 45 °C, flow rate 1350 l/h
Plate heat exchangerWith high transfer performance: Dt = 6 K between flow primary circuit andflow secondary circuit. Soldered stainless steel plates, with insulation.Connections: 1“ ET.
1320 FWWT Plate heat exchanger 55 kW
13251326132713281329133013311332
PWT-L-10 Collector area up to 10 m2 1“ ETPWT-L-25 Collector area up to 25 m2 1“ ETPWT-L-40 Collector area up to 40 m2 1“ ETPWT-L-60 Collector area up to 60 m2 1“ ETPWT-L-80 Collector area up to 80 m2 1“ ETPWT-L-120 Collector area up to 120 m2 1“ ETPWT-L-150 Collector area up to 150 m2 1“ ETPWT-L-200 Collector area up to 200 m2 1“ ET
1335
1337
1338
1339
Screwed connection jointsØ 22 mm soldering socket, union nut 1“ 1 pairScrewed connection joints Ø 3/4” ET, union nut 1“ 1 pairScrewed connection jointsØ 1” ET, union nut 1“ 1 pairScrewed connection joints for 90° corner jointØ 1” ET, union nut 1“ and 1/2” IT sensor 1 pair
Heat exchanger
Upright INSTALLATIONPOSITION
Horizontal INSTALLATIONPOSITION
Swimming pool heat exchanger „stainless steel“(unsuitable for salt water or aluminium pools)Shell and tube heat exchanger made of stainless steel V4A. Max. output:75 kW for a temperature difference of 60 °C between the hot solar flow andcold swimming pool water supply, plus a solar flow rate of 2100 l/h anda swimming pool flow rate of 18,000 l/h. Any deviation from these parameterswill alter the heat exchanger’s output.Swimming pool connections: 2” IT; solar: 1” IT, L = 613 mm, Dm = 129 mm.UPRIGHT installation position! Request data sheet if necessary.
135013571358
SBWT-V4AScrewed connection joints 2“ x 50 mm 1 pairScrewed connection joints 2“ x 63 mm 1 pair
Swimming pool heat exchanger „titanium“(for swimming pools filled with salt water) Tube coil heat exchanger madeof titanium. Max. output: up to 40 kW for a temperature difference of 60 °Cbetween the hot solar flow and cold swimming pool water supply, plus a solarflow rate of 2400 l/h and a swimming pool flow rate of 21,000 l/h.Any deviation from these parameters will alter the heat exchanger’s output. Swimming pool connections: 6/4” IT; solar: 1” IT, L = 510 mm, Dm = 127 mm.HORIZONTAL installation position! Request data sheet if necessary.
135213551356
SBWT-TITANScrewed connection joints 6/4“ x 50 mm 1 pairScrewed connection joints 6/4“ x 63 mm 1 pair
IMPORTANT: NOTE for swimming pool heat exchangers: The solar pump must never run without
a swimming pool pump! Avoid overheating on the swimming pool side – protect your system using
a constant value regulator or a safety thermostat (50 °C) on the heat exchanger!
644.-
373.-447.-766.-870.-
1202.-1513.-1637.-2031.-
21.60
33.-
28.80
45.30
744.-142.-184.-
1023.-134.-202.-
E-mail: [email protected] l www.solarfocus.eu
makes you independent
58
Flex stainless steel double stainless steel pipe, DN20, DN25 For underground installation. Stainless steel corrugated pipe (1.4404)insulated with elastic rock wool, incl. sensor cable (4 x 0.8 mm2) in corrugated HDPE pipe Ø 160 mm.Temperature-resistant up to +250 °CSupplied per running m!
146214631460
FLEX-ERD - 2 x 20 Per running mFLEX-ERD - 2 x 25 Per running mWater-tight end cap Per piece
Insulation material – flex double stainless steel piping
Pipe insulation for normal useAluminium-clad rock wool half-shells with adhesive fastener.Details: inner diameter/insulation thickness (mm)
Pipe insulation for rough useRock wool clad with aluminium coarse grain foil for exterior use(half-shells to be sealed with pure aluminium adhesive tape or with silicon and rivets). Details: inner diameter/insulation thickness (mm).
Rubber pipe insulation For insulating free-standing and underground installations. Temperature-resistant: -40 °C to +175 °C, largely UV and water-resistant,CFC-free. Hoses: 2 m, black. Details: inner diameter/insulation thickness (mm).
14111412141314141415
ISO 18/20 42 running m/box Per running mISO 22/20 36 running m/box Per running mISO 22/30 20 running m/box Per running mISO 28/20 30 running m/box Per running mISO 28/30 20 running m/box Per running m
143114321433
ISO 18/20-G 42 running m/box Per running mISO 22/30-G 20 running m/box Per running mISO 28/30-G 20 running m/box Per running m
1441144214431449
K-ISO 18/19 72 running m/box Per running mK-ISO 22/19 64 running m/box Per running mK-ISO 28/19 48 running m/box Per running mRubber tape self-adhesive 50 x 3 mm 1 roll of 15 running m
Aluminium protection hoseBird picking and UV protection for rubber pipe insulation used outside.Nominal diameter: 80 mmLength: 1 m extendable to max. 3 m
1452 Aluminium hose Per pieceIMPORTANT:
Also order aluminium hose
for exterior use to protect
the rubber pipe insulation
against bird picking and
UV radiation!
NOTE: Lead time of 10 working days from when the order is received.
Special lengths available on request
3.303.905.503.906.10
5.-7.608.10
6.407.508.20
35.60
18.50
77.-99.-68.-
Price list 2013
59
7
Easily separated into individual tubes!
Flex stainless steel double corrugated pipe DN20, DN25 With rubber insulation and protective foil2 x stainless steel pipe (1.4404) with rubber insulation, insulation thickness 13 mm,incl. sensor cable 4 x 0.8 mm2. Without fitting.Temperature-resistant up to +150 °C - short-time up to +175 °C Supplied in rolls of 50 running m or per running m!
Fittings kits for flex stainless steel double corrugated pipesWith external thread or soldering socket.
14871488
1489-3/41489-1
1490
Fittings kit DN 20 x 3/4“ ET Per pc.Fittings kit DN 20 x 22 mm soldering socket Per pc.Fittings kit DN 25 x 3/4“ ET Per pc.Fittings kit DN 25 x 1“ ET Per pc.Fittings kit DN 25 x 28 mm soldering socket Per pc.
14971497-50
14981498-50
FLEX-K - 2 x 20 Per running mFLEX-K - 50 - 2 x 20 Per rollFLEX-K - 2 x 25 Per running mFLEX-K - 50 - 2 x 25 Per roll
14711472
DN-20K For part no.: 1497 4 pcs./setDN-25K For part no.: 1498 4 pcs./set
Oval fixing clip for flex stainless steel double corrugated pipe Incl. hanger bolt M8 x 80 mm and dowel S10
Flow rate (m3/h)
Medium: Water/glycol 40:60
Operating temperature: 80 °C
Density: 998 kg/m3
Kinematic viscosity: 1.05 x 10-6 m2/s
Pre
ssu
re l
oss (
mb
ar/
m)
Flexible solar pipe systems
9.5011.6020.-20.-32.-
31.-1451.-
37.-1833.-
20.-21.60
InsertFor pump group sets DN25 (page 53) for flat-seal fitting
E-mail: [email protected] l www.solarfocus.eu
Flex stainless steel double corrugated pipe DN20 With rubber insulation and protective foilPacked in a box 800 x 800 mm, 2 x stainless steel corrugated pipe (1.4404) withrubber insulation, insulation thickness 13 mm, incl. sensor cable 4 x 0.8 mm2
with 4 x fitting 3/4” ET. Temperature-resistant up to +150 °C - short-time up to +175 °C
1497-201497-15
FLEX-K20 - 2 x 20 20 running m/packFLEX-K15 - 2 x 20 15 running m/pack
Flex stainless steel double corrugated pipe DN25 With rubber insulation and protective foil packed in a box 800 x 800 mm, 2 x stainless steel corrugated pipe (1.4404) with rubber insulation, insulationthickness 13 mm, incl. sensor cable 4 x 0.8 mm2 with 2 x fitting 1 ” ET and 2 x 3/4“ ET. Temperature-resistant up to +150 °C - short-time up to +175 °C
1498-201498-15
FLEX-K20 - 2 x 25 20 running m/packFLEX-K15 - 2 x 25 15 running m/pack
615.-470.-
802.-607.-
1533 ET Per pc. 3.70
makes you independent
60
Anti-freeze
SOLARCOOL anti-freeze concentratePropylene glycol, food-grade, biologically degradable,corrosion protection warranty: 10 years
17001701
FS-30 1 canister of 30 kgFS-10 1 canister of 10 kg
Solar circuit filling quantity
CPC 0.6 litres/m2
Sunnyline 0.4 litres/m2
The pipe system and the volume of the heat exchanger must also be taken into account in the calculation. For example: Pipe DM 18: 0.2 litres/m
Pipe DM 22: 0.3 litres/mPipe DM 35: 0.8 litres/m
DHW tank Per 100 litre volume Approx. 2.8 litresSolar buffer tank Per 100 litre volume Approx. 2.2 litresHYKO 600 to 1500 litre Per 100 litre volume Approx. 1.85 litres
Mixing table for anti-freeze concentrate
The concentrate may be used in the food industry, but is not suitable for consumption.
Prerequisite: do not mix with other brands
Concentrate Water Anti-freeze protection
25% 75% -10 °C
30% 70% -13 °C
35% 65% -16 °C
40% 60% -20 °C
45% 55% -25 °C
Anti-freeze testerFor rapid and precise anti-freeze tests.Optical unit: suitable for propylene glycol, ethylene glycol and battery acids.
1711 FP-RM Refractometer
PH measuring stripsFor testing the pH value of the water/glycol mixture. The pH value must be greater than 7 to guarantee corrosion protection!pH measurement range: 5.5 to 9.
1720 PH indicator paper 1 roll of 4.8 m
IMPORTANT:If product comes into contact with eyes, rinse thoroughly with water. Consult a doctor if reddening occurs or the eyes
water persistently.
175.-64.-
140.-
23.-
Price list 2013
61
to
8Commissioning the installation
Earth the solar thermal system with min. 6 mm2 copper cable.
Check the pre-pressure at the expansion vessel (2.5 bar).
Temperature spread (adjusted using step switch on the pump):
Collector flow Collector return
30 °C 25 °C
50 °C 40 °C
70 °C 55 °C
Or speed-controlled via the solar control.
Anti-freeze
Professional filling pump with wheelsUp to max. 5.5 bar, V = 50 l/min at 3.5 bar, 230 Vwith pump, storage container and hose connection set.
1740 FP Filling pump
1750 SSB
Hand-operated filling and injection pumpUp to max. 4.5 bar, V = 2 l/min.
1730 HFP ET = 1/2“ 15 mm hose connection
Return
Flow
Thoroughly flush the system with water (approx. 3 bar) until no moreair escapes. NOTE: Use the „Professional filling pump“!Perform a tightness/water pressure test at approx. 4 bar.
IMPORTANT: IMMEDIATELY FILL THE SYSTEM WITH THE ANTI-FREEZE
MIXTURE AFTER SUCCESSFULLY PERFORMING THEPRESSURE TEST! - RISK OF FROST -
Pump the anti-freeze/water mixture into the system. NOTE: Check theeffectiveness of the anti-freeze protection and the pH value every 3 years.Replace the anti-freeze if the pH value is below 7.
Professional solar check boxWith digital multimeter, refractometer, incl. measuring and servicing instruments,etc. for thermal solar installations.
1760 KEX 1 kg
KALK-EX powdered limestone solventPowdered limestone solvent with metal protection, 1 kg per pack.1 kg KALK-EX is enough for around 100 l lukewarm water.
IMPORTANT: If the pH value is below 7, there is a risk that thecopper pipes in the system may be corroded.We recommend that only branded biologically degradable anti-freezeproducts are used, e.g. part no. 1700. The use of anti-freeze is an obligatory WARRANTY STIPULATION.
617.-
320.-
126.-
69.-
E-mail: [email protected] l www.solarfocus.eu
makes you independent
62
DHW mixerIncl. insulation and 2 backflow inhibitors.Thermostatic DHW limitation: 35 °C - 70 °C
18051807
ST-150 Buffer tank thermometer Shaft length: 150 mmZT-45 Dial thermometer Shaft length: 45 mm
ThermometerØ 63 – 1/2“ immersion sleeve, temperature range: 0 °C to 120 °C
1822
1823
MA5 Replacement anode 5/4” x 500 mm for storage tanks up to 540 l
MA7 Replacement anode 5/4” x 700 mmfor storage tanks from 750 l
Magnesium anode
Parasitic current anodeConsisting of connector housing, titanium parasitic current anode andconnection cable.Connections: 1/2“ ET, 230 V, suitable for storage tanks up to 1000 l.
1825 FA Parasitic current anode Length = 430 mm
Accessories for Tanks and Solar
Non-insulated chain anode for ECOLINE Buffer tank1” x 22 x 1580 mm
1826 ANECO
Anode for ECOLINE Buffer tank 300/500 litre1” x 26 x 1100 mm
1829 AN
NOTE: Trap to combat scaling
DHW mixer
Hot water
Cold water
DHW
mixed
NOTE:
If a parasitic current anode is used, the magnesium anode
must be removed!
11.-6.-
30.-
33.-
175.-
72.-
39.-
Price list 2013
18151816
1817
BWM-1“ 3 x 1“ ET Fitting for part no.: 1815, flat-seal Fitting for 1” on 1/2” ETFitting for part no.: 1815, flat-seal Fitting for 1” on 3/4” ET
65.-
16.50
15.50
63
9
Aluminium adhesive tape
1895
1896
AK-BED Aluminised adhesive tape 1 roll of 50 running m
Width: 50 mm, for interior use
AK-REIN Pure aluminium adhesive tape 1 roll of 50 running m
Width: 50 mm, for exterior use
Accessories for Tanks and Solar
Electrical immersion heater6/4“ sleeve with safety thermostat (95 °C) and external regulation thermostatadjustable from 40 °C to 95 °C, incl. operation lamp.
1831183218331834
EH 2500 2.50 kW 230 V Installation length: 300 mmEH 4500 4.50 kW 400 V Installation length: 500 mmEH 6000 6.00 kW 400 V Installation length: 600 mmEH 9000 9.00 kW 400 V Installation length: 800 mm
Selecting the electrical immersion heater: a 2.5 kW immersion heater
can heat 100 litres of water from 20 °C to 50 °C in approx. 1.5 hours.
IMPORTANT: Use descaling equipment in the case of hard water.
Observe the local connection guidelines!
NOTE:
The electrical immersion heater is
suitable for continuous operation
if maintained regularly!
Manual ventWith perforated plate, without insulation, for solar thermal systems.
Connecting tubeStainless steel corrugated pipe with union nuts 3/4”, incl. insulation as flexibleconnection between solar circuit and ribbed-tube heat exchanger. IMPORTANT: Use part no. 1311, 1312, 1318 (page 56) as corrosionprotection for the DHW tank!
1841 ASE-3/4 x 1.5 Connecting hose 3/4“ L=1.5 m
185518561857
HE18 For Cu pipe Ø 18 mmHE22 For Cu pipe Ø 22 mmHE28 For Cu pipe Ø 28 mm
Manual vent with weather-proof insulationWith perforated plate and weather-proof insulation, for solar thermal systems.
18651866
HEI22 For Cu pipe Ø 22 mmHEI28 For Cu pipe Ø 28 mm
Flow regulatorUsed in the return to compare the volumetric flows of different collector arrays;connection 3/4“ IT, operating temperature 130 °C, operating pressure 8 bar(with closing plugs included in the scope of delivery the operating temperatureincreases to 185 °C and the operating pressure to 10 bar), measuringaccuracy ±10% of the indicated value.
1188311884
DMR 2 to 12 l/min. 3/4” ITDMR 8 to 30 l/min. 3/4” IT
Automatic vent for heatingThe maximum operating temperature is 110 °C at a maximum nominal pressure of 10 bar.
1850 AE-1/2“
Automatic vent for solar The maximum operating temperature is 150 °C at a maximum nominalpressure of 10 bar. Not suitable for steam! The deaerator must be isolatedfrom the solar thermal system with a check valve! WITHOUT CHECK VALVE
1853 AE-3/8“
5.10
10.20
273.-334.-347.-373.-
26.-
42.-42.-46.-
74.-84.-
172.-172.-
11.2
14.-
E-mail: [email protected] l www.solarfocus.eu
makes you independent
64
Technical data:
Nominal power [kW] 14.9 25 35 49 70
Minimum power [kW] 4.5 7.3 10.5 14.7 21
Depth without fan [cm] 108.5 120 143 155.4 155.4
Width [cm] 55 55 55 79 79
Width (incl. ash box) [cm] Not available Not available 94 119.4 119.4
Height [cm] 143 155 155 167.3 167.3
Flue gas pipe DM [cm] 13 13 15 20 20
Height, centre of flue gas pipe [cm] 61.5 75.5 45.5 54.1 54.1
Weight [kg] 279 368 554 882 882
Water content [l] 51 66 58 130 130
Pellet storage container [l] 71 87 95 250 250
Fuel: pellets EN 14961-2, ENplus-A1
Recommended buffer tank volume
30 l/kW
l Maximum efficiency
l Compact construction
l Pioneering control
Gasification technologyCombustion efficiency
Partial load: 96.8%Full load: 96.0%
Boiler efficiency: 94.8%
ecomanager-touch
l Simple, logical operation
l Remote monitoring andsystem checks via Ethernet
l Output and combustion control optimises burner performance fully automatically
l Full graphic display with backlight
l Visualisation via iPad
Technical report: pellettop
Flue gas values in mg/m3 relate to 13% O2 of the volumetric flow.
pellettop 15 pellettop 25 pellettop 35 pellettop 49 pellettop 70 Power [kW] Full Partial Full Partial Full Partial Full Partial Full Partial
load load load load load load load load load load
CO2 [%] 15.3 13.0 15.9 13.1 16.7 12.2 16.86 12.4 17.1 12.7
CO [mg/m³] 29 86 6 128 10 48 8.8 40.4 7 29
HC [mg/m³] 1 1.5 2 2 2 2 2 2 2 2
Nox [mg/m³] 96 103 104 111 101 101 103.8 108.6 108 119
Dust content [mg/m³] 17 11 19 17 20 17 20 17.8 20 19
Required draught [Pa] 5 - 10 5 - 10 5 - 10 5 - 10 5 - 10 5 - 10 5 - 10 5 - 10 5 - 10 5 - 10
Flue gas mass flow [g/s] 8.2 3.1 11.5 4.0 30 10 40 14 55 20
Max. flue gas temperature [°C] 140.0* 73.0 140.0* 83.0 140.0* 78 140.0* 79.2 140.0* 82
Boiler flow/boiler return connection[„] ET 1“ ET 1“ ET 11/4“ ET 11/2“ ET 11/2“
Drain [„] ET 1/2“ ET 1/2“ ET 1/2“ ET 1/2“ ET 1/2“
Therm. overload protection NOT required NOT require Required Required Required
NOTE: A draught stabiliser must be fitted if the required draught is not attained!
* Flue gas temperature can be adjusted electronically!
Pellet boiler – pellettop
Price list 2013
65
10
pellettop with suction heads and manual or automatic diverterfor suction headsMax. auger length (diverter - boiler) = 15 mMax. auger height (diverter - boiler) = 2.5 m
pellettop with extraction auger vacuum systemMax. auger length = 20 mMax. auger height = 5 m
pellettop with pellet box Optionally with:
Pellet box for vacuum extraction with auger transfer unitMax. auger length = 20 m, max. auger height = 5 m
Pellet box for suction head systemMax. auger length = 15 m, max. auger height = 2.5 m
Suitable pellet boxes can be found
from page 109 onwards
E-mail: [email protected] l www.solarfocus.eu
makes you independent
66
Pellet boiler pellettop
Efficiency of pellettop 15 kW:
94.8%
Efficiency of pellettop 25 kW:
94.9%
Part no. €
Commissioning of pellettop 6087 Net price 297.-
ecomanager-touch second heating circuit 6150 127.-
Solar control (single-circuit) 61680 241.-
Easy, environmentally-friendly heating with pellets
pellettop Vacuum system with extraction augerBoiler power kW 15 15 15 25
Pellet boiler pellettop Part no.: 67122 67122 67122 67132
Return booster module-HE incl. insulation Part no.: 68523 68523 68523 68523
Conveying hose 20 m Part no.: 6121 6121 6121 6121
Extraction auger for vacuum system Part no.: 6110-10 6112-10 6114-10 6110-10
Box Part no.: —- —- —- —-
Vacuum refill and return-air coupling Part no.:
Part no.: B0611-2 B0611-3 B0611-4 B0621-2
Set price € 9980.- 10,155.- 10,329.- 11,273.-
Pellet boiler – pellettop
Price list 2013
Boiler width 55 cm
l Maximum efficiencyl Compact constructionl Pioneering controll Downfiring combustionl No moving parts in the combustion chamberl Very low space requirementl Lambda sensor technology since 1981l Fully automatic cleaning of heat exchangersl Rotary star wheel backburning protectionl Pellets supplied either via a vacuum system or manuallyl Ignition via glow pencil
67
10
pellet top with suction headspellet top manual storage container
pellet top vacuum system with extraction augerpellet top with pellet box
Choose your system
Vacuum system with pellet box and suction head25 25 15 15 15 25 25
67132 67132 67122 67122 67122 67132 67132
68523 68523 68523 68523 68523 68523 68523
6121 6121 6121 6121 6121 6121 6121
6112-10 6114-10 —- —- —- —- —-
—- —- 6679SS 6672SS 6673SS 6672SS 6673SS
6675 6675 6675 6675 6675
B0621-3 B0621-4 B0612-0 B0612-6 B0612-7 B0622-0 B0622-7
11,448.- 11,622.- 11,690.- 12,055.- 12,357.- 13,348.- 13,650.-
E-mail: [email protected] l www.solarfocus.eu
makes you independent
68
Pellet boiler for manual filling: Boiler:
Biomass boiler with output and combustion control. Compact steel construction with heat-resistant combustion chamber. Downfiring combustion (gasification technology). Performance control via induced draught fan, combustion control via lambda sensor and fill level optimisation. Automatic heat exchanger cleaning device with generously sized, fire brick-lined ash chamber incl. ash drawer. Automatic ignition via energy-efficient glow pencil.
Integrated manual storage container:The storage container integrated in the boiler must be filled manually. The patented rotary star wheel backburning protection device ensures the correct fuel dosage is achieved and provides 100% backburning protection.
Control: Complete with state-of-the-art touch-screen control and full graphic display, integrated heating circuit control dependent on atmospheric conditions for one heating circuit, 1 DHW charging circuit and buffer charge control (can be extended to max. 8 heating circuits with 4 buffer stores and 4 DHW tanks). Simple and intuitive control with full graphic 5.7“ VGA colour touch-screen display. Complete with sensors and attractive mounted cover. Colour: grey with silver/red
Visualisation and remote maintenance possible via VNC server: All system settings can be modified via smartphone or touch pad (for PC and Mac).
pellettop 15, 25 kW manual storage container
Pellet boiler for manual filling for operation as a room-sealed applianceAs above, but prepared for operation as a room-sealed appliance. For systemswhich have to suck in the required combustion air from outside. Incl. fittedadapter piece (connection on left), flexible aluminium suction hose (can bepulled out to 3 m, DM 80 mm) and 2 fixing clamps.
Options for visualisation
on smartphones, PCs and tablets!
Pellet boiler – pellettop
Price list 2013
Capacity ofmanual storage container
Litres kg
pellettop 14.9 kW 110 Approx. 70
pellettop 25.0 kW 125 Approx. 80
6712467134
pellettop 4.5 - 14.9 kW Pc.pellettop 7.5 - 25.0 kW Pc.
pellettop 4.5 - 14.9 kW Pc.pellettop 7.5 - 25.0 kW Pc.
67124RLU67134RLU
8777.-10,069.-
8249.-9542.-
With boiler, heating circuit andbuffer charge control
69
10
Auto
matic
ash
ext
ract
ion
from
pellett
op
35 k
W,
may
be
mounte
d o
n t
he r
ight
or
left. Pellet boiler for vacuum system:
Boiler:Biomass boiler with output and combustion control. Compact steel construction with heat-resistant combustion chamber. Downfiring combustion (gasification technology). Performance control via induced draught fan, combustion control via lambda sensor and fill level optimisation. Automatic heat exchanger cleaning device with generously sized, fire brick-lined ash chamber incl. ash drawer (or ash box for 35 kW).Automatic ignition via energy-efficient glow pencil.
Vacuum unit:The powerful vacuum turbine fitted in the boiler transports the pellets from the end of the extraction auger or from the suction head (not included) intothe integrated pellet storage container. The patented rotary star wheel backburning protection device ensures the correct fuel dosage is achieved and provides 100% backburning protection.
Control: Complete with state-of-the-art touch-screen control and full graphic display, integrated heating circuit control dependent on atmospheric conditions for one heating circuit, 1 DHW charging circuit and buffer charge control (can be extended to max. 8 heating circuits with 4 buffer stores and 4 DHW tanks). Simple and intuitive control with full graphic 5.7“ VGA colour touch-screen display. Complete with sensors and attractive mounted cover. Colour: grey with silver/red
Visualisation and remote maintenance possible via VNC server: All system settings can be modified via smartphone or touch pad (for PC and Mac).
pellettop 15, 25 and 35 kW vacuum system
Lifting aid for pellettop 15 and 25 kWErgonomically designed lifting aid for transporting the pellet boiler.
6140 TH for pellettop Set
IMPORTANT:
The use of a return booster module is a warranty requirement for SOLARFOCUS!
Pellet boiler for vacuum system and for operation as a room-sealed applianceAs above, but prepared for operation as a room-sealed appliance. For systems whichhave to suck in the required combustion air from outside. Incl. fitted adapter piece(connection on left), flexible aluminium suction hose (can be pulled out to 3 m, DM 80 mm) and 2 fixing clamps.
88.-
Options for visualisation
on smartphones, PCs and tablets!
Connection forsuction hose DM 80 mm,
maximum suction length 12 m
671226713267142
pellettop 4.5 - 14.9 kW Pc.pellettop 7.5 - 25.0 kW Pc.pellettop 7.5 - 35.0 kW Pc.
pellettop 4.5 - 14.9 kW Pc.pellettop 7.5 - 25.0 kW Pc.pellettop 7.5 - 35.0 kW Pc.
67122RLU67132RLU67142RLU
8927.-10,219.-12,709.-
8399.-9692.-
12,219.-
E-mail: [email protected] l www.solarfocus.eu
makes you independent
With boiler, heating circuit and buf-fer charge control
Top view
70
*
*
*
IMPORTANT:
The use of a return booster module
is a warranty requirement
for SOLARFOCUS!
Pellet boiler for vacuum system: Boiler:
Biomass boiler with output and combustion control. Compact steel construction with heat-resistant combustion chamber. Downfiring combustion (gasification technology). Performance control via induced draught fan, combustion control via lambda sensor and fill level optimisation. Automatic heat exchanger cleaning device with generously sized, fire brick-lined ash chamber, with automatic ash extraction and generously sized ash box. Automatic ignition via hot air fan.
Vacuum unit:The powerful vacuum turbine fitted in the boiler transports the pellets from the end of the extraction auger or from the suction head (not included) into the integrated pellet storage container. The patented rotary star wheel backburning protection device ensures the correct fuel dosage is achieved and provides 100% backburning protection.
Control: Complete with state-of-the-art touch-screen control and full graphic display,integrated heating circuit control dependent on atmospheric conditions for one heating circuit, 1 DHW charging circuit and buffer charge control (can be extended to max. 8 heating circuits with 4 buffer stores and 4 DHW tanks). Simple and intuitive control with full graphic 5.7“ VGA colour touch-screen display. Complete with sensors and attractive mounted cover. Colour: grey with silver/red
Visualisation and remote maintenance possible via VNC server: All system settings can be modified via smartphone or touch pad (for PC and Mac).
pellettop 49 and 70 kW
NOTE:
If the heating system is operated
without a buffer tank, it is
necessary to fit a hydraulic switch
(page 106).
BENEFIT:Ideal for cascade
systems up to 420 kW
Thermal return booster modulePre-assembled return booster module to prevent the temperature droppingbelow the dew point and to counteract boiler soot. Complete with pump,thermal three-way valve and thermometer. Recommended for use in buffercharging too, provided that the pump rating is high enough. Incl. insulation
68503685016852368521
RLA 1“ Up to 25 kW 55 °CRLA 5/4“ Up to 60 kW 61 °CRLAHE 1“ Up to 25 kW 55 °CRLAHE 5/4“ Up to 60 kW 61 °C
400.-405.-605.-605.-
Return booster module with mixer motorPrevents the temperature dropping below the dew point and counteracts boiler soot. The return temperature is set via the mixer motor by means of theecomanager or ecomanager-touch boiler control. Complete with pump andmotorised three-way mixing valve.
Options for visualisation
on smartphones, PCs and tablets!
6715267172
pellettop 14 - 49 kW Pc.pellettop 20 - 70 kW Pc.
15,729.-15,729.-
685026850468522685246852568527
RLA 1“ Up to 25 kW 25/6RLA 5/4“ Up to 35 kW 26/6RLAHE 1“ Up to 25 kW Yonos/Para 25/1-6 RLAHE 5/4“ Up to 35 kW Yonos/Para 25/1-6 RLAHE 5/4“ 40 - 60 kW Yonos/Para 30/7 RLAHE 6/4“ 60 - 90 kW Stratos/Para 30/8
449.-469.-734.-750.-846.-
1080.-
Pellet boiler – pellettop
Price list 2013High-efficiency pump HE: Water quality according to ÖNORM H 5195-1 or VDI Guideline 2035.
Also: The medium must be free of air and sludge!
With boiler, heating circuit andbuffer charge control
71
10
pellettop with extraction auger vacuum system
Pellet extraction auger for vacuum systemConsisting of auger with geared motor, auger trough and connections forvacuum hoses. Integrated backburning protection. Complete with sealingand fixing materials. Maximum auger length: 6 m; covered length: 1 m (split design).
6110-106112-106114-106115-106116-10
6239
S-RS-2 Auger length 2 m; covered length 1 mS-RS-3 Auger length 3 m; covered length 1 mS-RS-4 Auger length 4 m; covered length 1 mS-RS-5 Auger length 5 m; covered length 1 mS-RS-6 Auger length 6 m; covered length 1 mIntermediate section Auger length 0.45 m
830.-1005.-1179.-1353.-1527.-
138.-
Automatic suction head set for pellets, 4-fold, can be extended to 6-foldConsisting of an automatically switchable diverter, four suction heads anda suction head module. With 18 x hose clamp, without vacuum hose!The maximum total length in one direction is 15 m and the maximumpermissible difference in height between the furthest suction head and theboiler is 2.5 m. The minimum bend radius for the vacuum and return-air hosesis 30 cm. The suction head module is connected to the boiler control via a buscable 2 x 0.25 mm² (provided by the client).Only in combination with SOLARFOCUS ecomanager-touch.
Manual suction head set for pellets, 4-foldConsisting of a manually switchable diverter and four suction heads. With 16 x hose clamp, without vacuum hose! The maximum total length in onedirection is 15 m and the maximum permissible difference in height betweenthe furthest suction head and the boiler is 2.5 m. The minimum bend radius for the vacuum and return-air hoses is 30 cm.
pellettop with suction heads and manual or automatic diverter for suction heads
SOLARFOCUS suction headSuction head for extracting pellets from the storage area. Consisting of onesuction head with 4 x hose clamp, without vacuum hose! With floor fixingmaterials. The maximum total length of the vacuum hose in one direction is15 m and the maximum permissible difference in height between the furthestsuction head and the boiler is 2.5 m. The minimum bend radius for the vacuum and return-air hoses is 30 cm.
F90 stacking frameIf the thickness of the wall where the automatic diverter for suction heads is tobe mounted is less than 25 cm and the storage area represents a separate firecompartment, the F90 stacking frame must be used to achieve the requiredcoverage of rock wool sheets (rock wool not included).
E-mail: [email protected] l www.solarfocus.eu
68190 SM Pc.
68180 SU Pc.
676.-
90.-
68185 SA Pc. 1195.-
68195 AR Pc. 38.-
makes you independent
72
Technical data:
octoplus 10 octoplus 15Power [kW] 2.9 - 9.9 2.9 - 14.9
Depth with fan [cm] 148 148
Width [cm] 88 88
Height [cm] 185 185
Buffer tank DM without insulation [cm] 70 70
Buffer tank weight [kg] 150 150
Flue gas pipe DM [cm] 13 13
Height, centre of flue gas pipe [cm] 58.4 58.4
Total weight [kg] 285 285
Water content [l] 550 550
Pellet storage container [l] 49 49
Control
ecomanager-touch
Combustion efficiency octoplus 10 kW: 96.5%
Combustion efficiency octoplus 15 kW: 95.3%
Only approx. 1 m² floor space requiredInstallation dimension: at least 750 mm
Pellet boiler – octoplus
Price list 2013
Technical report: octoplus
Flue gas values in mg/m3 relate to 13% residual oxygen.
Power [kW] Full load 9.9 - Partial load 2.9 Full load 14.9 - Partial load 2.9
CO2 [%] 13.3 10.9 14.3 10.9
CO [mg/m³] 70 165 40 165
HC [mg/m³] < 1 2.7 < 1 2.7
Nox [mg/m³] 103 104 101 104
Dust content [mg/m³] 16 15 19 15
Required draught [Pa] 5 - 10 5 - 10 5 - 10 5 - 10
Flue gas mass flow [g/s] 5.5 2.5 8.4 2.5
Max. flue gas temperature [°C] 140.0* 59.0 140.0* 59.0
HVL/FMW = Heating water flow/fresh water module (IT 1“)KVL = Boiler flow (IT 1“)HVL (opt.) = Heating water flow (IT 1“)KRL/AU = Boiler return - automatic boiler (IT 1“)SRL = Solar return (ET 1“, flat-seal)SVL = Solar flow (ET 1“, flat-seal)HRL = Heating water return (stratified charging lance) (IT 1“)KRL/ST = Boiler return - log boiler (IT 1“)
NOTE:
A draught stabiliser must be fitted if
the required draught is not attained!
* Flue gas temperature can be
adjusted electronically!
73
11
octoplus with suction heads and manual or automatic diverterfor suction headsMax. auger length (diverter - boiler) = 15 mMax. auger height (diverter - boiler) = 2.5 m
octoplus with extraction auger vacuum systemMax. auger length = 20 mMax. auger height = 5 m
octoplus with pellet box Optionally with:
Pellet box for vacuum extraction with auger transfer unitMax. auger length = 20 m, max. auger height = 5 m
Pellet box for suction head systemMax. auger length = 15 m, max. auger height = 2.5 m
Suitable pellet boxes can be found
from page 109 onwards
E-mail: [email protected] l www.solarfocus.eu
makes you independent
74
octoplus
••••••••
•
Pellet boiler octoplus
Combustion efficiency octoplus 10 kW: 96.5%Combustion efficiency octoplus 15 kW: 95.3%
Pellet burner with gasification technology
Maximum efficiency
Compact construction
Pioneering touch-screen control
Buffer tank of 550 l
Solar coil 1.8 m²
Integrated daily storage container
Automatic roller ash removal
with ash box
Simple pipework and set-up
Only approx. 1 m² floor space required
Easy, environmentally-friendly heating with pellets
• Gasification technology • No moving parts in the combustion chamber
• Very low space requirement • Lambda sensor technology since 1981
octoplus Vacuum systemBoiler power kW 10 10 10 15
Pellet boiler octoplus Part no. 67010 67010 67010 67015
Conveying hose Part no. 6121 6121 6121 6121
Extraction auger for vacuum system Part no. 6110-10 6112-10 6114-10 6110-10
Box Part no. —- —- —- —-
Vacuum refill and return-air coupling Part no.
Part no. B0760-2 B0760-3 B0760-4 B0761-2
Set price € 11,298.- 11,473.- 11,647.- 11,298.-
Pellet boiler – octoplus
Price list 2013
75
11
TIP: For larger solar thermal systems, combine the octoplus with an additional buffer tank.
• Fully automatic cleaning of heat exchangers • Rotary star wheel backburning protection
• Pellets supplied via a vacuum system • Ignition via glow pencil
Pellet box with suction head15 15 10 10 10 15 15 15
67015 67015 67010 67010 67010 67015 67015 67015
6121 6121 6121 6121 6121 6121 6121 6121
6112-10 6114-10 —- —- —- —- —- —-
—- —- 6679SS 6672SS 6673SS 6679SS 6672SS 6673SS
6675 6675 6675 6675 6675 6675
B0761-3 B0761-4 B0762-1 B0762-2 B0762-3 B0763-1 B0763-2 B0763-3
11,473.- 11,647.- 13,008.- 13,373.- 13,675.- 13,008.- 13,373.- 13,675.-
Options for visualisation
on smartphones, PCs and tablets!
ecomanager-touch second heating circuit 6150 127.-
Commissioning of octoplus 6088 373.- net price
Solar control (single-circuit) 61680 241.-
E-mail: [email protected] l www.solarfocus.eu
Part no. €
makes you independent
Planning and designing a solar thermal system suitable for octoplus
These design recommendations are intended to help you in planning your system. Of course, the assumed valuesare for guidance only. Important parameters such as DHW consumption, roof inclination and aspect must be givenindividual consideration during the planning phase. The building’s energy index and type of heating system aredecisive in determining the coverage rate for space heating installations using solar energy.
5.0 m²SOLARFOCUS 2xCPC S1k á 2.5 m²
5.6 m²SOLARFOCUS 2xCPC S1 á 2.8 m²
8.4 m²SOLARFOCUS 3xCPC S1 á 2.8 m²
11.2 m²SOLARFOCUS 4xCPC S1 á 2.8 m²
People and People and intended use Collector area intended use Collector area
*
*76 *
octoplus RLU 2.9 - 10 kW Pc.octoplus RLU 2.9 - 15 kW Pc.
67010RLU67015RLU
Pellet boiler for vacuum system and for operation as a room-sealed applianceAs above, but prepared for operation as a room-sealed appliance. For systems which have to suck in the required combustion air from outside.Includes fitted adapter piece (connection on right), flexible aluminium suctionhose (can be pulled out to 3 m, DM 80 mm) and 2 fixing clamps.
Pellet boiler for vacuum system: Boiler:
Biomass boiler with output and combustion control. Compact steel construction with heat-resistant stainless steel combustion chamber. Downfiring combustion (gasification technology). Performance control via induced draught fan, combustion control via lambda sensor and fill level optimisation. Automatic heat exchanger cleaning device with ash removal into an ash box. Automatic ignition via energy-efficient glow pencil.
Buffer tank:550 l buffer tank with integrated solar coil and stratified charging lance for the heating return. Connections 1“ on the rear side of the tank. 90 mm insulation with synthetic skin.Solar pump group (option) can be mounted directly onto the side of the buffer tank.
Pellet container with vacuum unit:The powerful vacuum turbine fitted on the pellet container transports the pellets from the end of the extraction auger or from the suction head (not included) into the integrated intermediate pellet container. The patented rotary star wheel backburning protection device ensures the correct fuel dosage is achieved and provides 100% backburning protection.
Control: Complete with state-of-the-art touch-screen control and full graphic display, integrated heating circuit control dependent on atmospheric conditions for 1 heating circuit and 1 DHW tank charging circuit (can be extended to max. 8 heating circuits with 4 DHW tanks). Simple and intuitive control with full graphic 5.7“ VGA colour touch-screen display. Complete with sensors and attractive cover. Colour: grey with silver/red. The components are suppliedseparately.
Visualisation and remote maintenance possible via VNC server: All system settings can be modified via smartphone or touch pad (for PC and Mac).
6701067015
octoplus 2.9 -10 kW Pc.octoplus 2.9- 15 kW Pc.
10,788.-10,788.-
10,322.-10,322.-
Options for visualisation
on smartphones, PCs and tablets!
Pellet boiler octoplus
Solar pump group set octoplus
Pump group set DN 25 with insulation for octoplus flow regulator 2-14 l/minand expansion vessel Pump, 2 gravity brakes, safety valve (6 bar), manometer and 2 pc. thermometer,with service coupling for expansion vessel, armoured hose, flush and fill tap.Connection: clamping ring DM 22 mm. H/W = 375/250 mm.
1521515313
PGS-ID-33 Expansion vessel 33 L - EST 25/7-130 Up to 13 m2
PGSH-ID-33 Expansion vessel 33 L - Para 25/1-7-130 Up to 13 m2
517.-816.-
Pump group set DN 25 with insulation for octoplus flow regulator 2-14 l/min, expansion vessel and automatic air separator. Pump, 2 gravity brakes, safety valve (6 bar), manometer and 2 x thermometer,with service coupling for expansion vessel, armoured hose, flush and fill tap.Connection: clamping ring DM 22 mm. H/W = 375/250 mm.
Price list 2013
NOTE: This pump group is exclusively intended for direct installation onto the octoplus.
High-efficiency pump HE: Water quality according to ÖNORM H 5195-1 or VDI Guideline 2035.Also: The medium must be free of air and sludge!
1561515613
PGSL-ID-33 Expansion vessel 33 L - EST 25/7-130 Up to 13 m2
PGSHL-ID-33 Expansion vessel 33 L - Para 25/1-7-130 Up to 13 m2
555.-843.-
Pellet boiler – octoplus
77
11
Pellet extraction auger for vacuum systemConsisting of auger with geared motor, auger trough and connections forvacuum hoses. Integrated backburning protection.Complete with sealing and fixing materials. Maximum auger length: 6 m;covered length: 1 m (split design).
6110-106112-106114-106115-106116-10
6239
S-RS-2 Auger length 2 m; covered length 1 mS-RS-3 Auger length 3 m; covered length 1 mS-RS-4 Auger length 4 m; covered length 1 mS-RS-5 Auger length 5 m; covered length 1 mS-RS-6 Auger length 6 m; covered length 1 mIntermediate section Auger length 0.45 m
830.-1005.-1179.-1353.-1527.-
138.-
octoplus with extraction auger vacuum system
octoplus with suction heads and manual or automatic diverter for suction heads
E-mail: [email protected] l www.solarfocus.eu
Automatic suction head set for pellets, 4-fold, can be extended to 6-foldConsisting of an automatically switchable diverter, four suction heads anda suction head module. With 18 x hose clamp, without vacuum hose!The maximum total length in one direction is 15 m and the maximumpermissible difference in height between the furthest suction head and theboiler is 2.5 m. The minimum bend radius for the vacuum and return-air hosesis 30 cm. The suction head module is connected to the boiler control via a buscable 2 x 0.25 mm² (provided by the client).Only in combination with SOLARFOCUS ecomanager-touch.
Manual suction head set for pellets, 4-foldConsisting of a manually switchable diverter and four suction heads. With 16 x hose clamp, without vacuum hose! The maximum total length in onedirection is 15 m and the maximum permissible difference in height betweenthe furthest suction head and the boiler is 2.5 m. The minimum bend radius for the vacuum and return-air hoses is 30 cm.
SOLARFOCUS suction headSuction head for extracting pellets from the storage area. Consisting of onesuction head with 4 x hose clamp, without vacuum hose! With floor fixing materials. The maximum total length of the vacuum hose inone direction is 15 m and the maximum permissible difference in heightbetween the furthest suction head and the boiler is 2.5 m. The minimum bend radius for the vacuum and return-air hoses is 30 cm.
F90 stacking frameIf the thickness of the wall where the automatic diverter for suction heads is tobe mounted is less than 25 cm and the storage area represents a separate firecompartment, the F90 stacking frame must be used to achieve the requiredcoverage of rock wool sheets (rock wool not included).
68190 SM Pc.
68180 SU Pc.
676.-
90.-
68185 SA Pc. 1195.-
68195 AR Pc. 38.-
makes you independent
78
EN 303-5CEN/TC 57
Price list 2013
therminator II-18 therminator II-27 therminator II-36 therminator II-49 therminator II-60
Power [kW] 18 27 36 49 60
Depth* [cm] 102 102 115 136 136
Width* [cm] 62 62 67 83 83
Height* [cm] 152 152 163 163 163
Flue gas pipe DM [cm] 13 13 15 20 20
Height, centre of flue gas pipe[cm] 75 75 85 90 90
Weight [kg] 534 534 652 777 777
Water content [l] 90 90 126 188 188
Filling space [l] 145 145 186 290 290
Max. length of logs [cm] 56 56 56 66 66
Loading door [cm] 37 x 27 37 x 27 42 x 27 56 x 27 56 x 27
Thermal overload protection[„] ET 1/2“ ET 1/2“ ET 1/2“ ET 1/2“ ET 1/2“
Immersion sleeves f. temp. sensor[„] IT 1/2“ IT 1/2“ IT 1/2“ IT 1/2“ IT 1/2“
Drain [„] ET 1/2“ ET 1/2“ ET 1/2“ ET 1/2“ ET 1/2“
Boiler return [„] ET 11/4“ ET 11/4“ ET 11/4“ ET 11/2“ ET 11/2“
Boiler flow [„] ET 11/4“ ET 11/4“ ET 11/4“ ET 11/2“ ET 11/2“
* Stated dimensions do not include ignition, induced draught fan or flue gas pipe.
l Wood gasification technologyl High boiler efficiencyl Automatic cleaning of heat exchangers!l Length of log wood 50 cml Automatic ignitionl With flange for subsequent upgrade to pellet operation
Technical data:
YOUR BENEFITS:Electrical pre-installation of all boilers at the factory - the functionality of all
components is tested - supplied “ready to plug in”.
Proven cutting-edge technology
Minimum buffer tank size
Power of Buffer Total
logs volume/kW volume
therminatorII-18 18 kW 55 l/kW 1000 l
therminatorII-27 27 kW 55 l/kW 1500 l
therminatorII-36 36 kW 55 l/kW 1980 l
therminatorII-49 49 kW 55 l/kW 2695 l
therminatorII-60 60 kW 55 l/kW 3300 l
Log wood boiler – therminator II touch
79
12
therm
inato
r II-1
8
Technical report therminator II touch log wood Flue gas values in mg/m³ relate to 13% residual oxygen.
therm
inato
r II-2
7th
erm
inato
r II-3
6th
erm
inato
r II-4
9th
erm
inato
r II-6
0
E-mail: [email protected] l www.solarfocus.eu
makes you independent
Full load Fuel 18 kW Logs/beechCO2 % 15.4CO mg/m3 158.0HC mg/m3 4.4Nox mg/m3 114.0Dust content mg/m3 8.0Required draught Pa 5 -10Flue gas mass flow g/s 10.0Max. flue gas temperature °C 140.0*
Full load Partial loadFuel 27 kW Logs/beechCO2 % 14.4 14.1CO mg/m3 244.0 910.0HC mg/m3 5.5 13.0Nox mg/m3 139.0 96.0Dust content mg/m3 14.0 12.0Required draught Pa 5 -10 5 -10Flue gas mass flow g/s 14.1 —-Max. flue gas temperature °C 140.0* 99.0
Full load Partial loadFuel 36 kW Logs/beechCO2 % 15.0 14.1CO mg/m3 79.0 211.0HC mg/m3 2.0 2.0Nox mg/m3 125 83Dust content mg/m3 14 11Required draught Pa 5 -10 5 -10Flue gas mass flow g/s 20.2 —-Max. flue gas temperature °C 140.0* 94
Full load Partial loadFuel 49 kW Logs/beechCO2 % 15.0 13.9CO mg/m3 99.8 585.0HC mg/m3 2.0 2.0Nox mg/m3 131.3 102.0Dust content mg/m3 14.9 12.8Required draught Pa 5 -10 5 -10Flue gas mass flow g/s 26.3 —-Max. flue gas temperature °C 140.0* 93.0
Full load Partial loadFuel 60 kW Logs/beechCO2 % 15.1 13.7CO mg/m3 125.0 1042.0HC mg/m3 2.0 1.9Nox mg/m3 139.0 125.0Dust content mg/m3 16.0 15.0Required draught Pa 5 -10 5 -10Flue gas mass flow g/s 31.5 —-Max. flue gas temperature °C 140.0* 92.0
* Flue gas temperature can be adjusted electronically!
80
Log wood boiler – therminator II touch
Efficiency of therminator II:
up to 94.4%
l For 1/2 metre log wood
l With flange for subsequent
Upgrade to pellet operation
Log wood boiler – therminator II touch
Price list 2013
therminator II touch log boilerBoiler power kW 27 27 27 36
Log boiler therminator II touch,
incl. boiler control, heating circuit control
1 heating circuit and 1 DHW circuit and charge
control for buffer charging and discharging Part no. 68303 68303 68303 68305
Return booster module - HE + insulation Part no. 68521 68521 68521 68521
buffer tank Lit/part no. 800 - 2 x 1231 1000 - 2 x 1232 1500 - 1234 1000 - 2 x 1232
Insulation for buffer tank Part no. 2 x 310800 2 x 311000 311500 2 x 311000
Part no. B0840-1 B0840-2 B0840-3 B0841-1
Set price € 11,306.- 11,678.- 11,178.- 12,887.-
Accessories package adapted to boiler – therminator II touch log boilerBoiler output kW 27 36 49 60
Boiler safety group Part no. 6548 6548 6548 6558
Stainless steel draught stabiliser with explosion flap Part no. 66594NIRO 66595NIRO 66598NIRO 66598NIRO
Therm. overload protection Part no. 6553 6553 6553 6553
Part no. B0730-0 B0731-0 B0732-0 B0734-0
Set price € 434.- 466.- 636.- 764.-
l More than 30 years of experience in the development of wood gasification boilers provides
you with a perfectly matured product.
81
12
Buffer tank connection set (recommendation: 4 DN40 connections) Part no. 1845 € 74.-
Second heating circuit Part no. 6150 € 127.-
Commissioning of therminator II touch log wood Part no. 6082 € 297.- net price
Automatic ignition surcharge (automatic ignition for log wood) Part no. 68070 € 1055.-
NOTE: The expansion vessel for your heating system has to be ordered separately!
NOTE:
therminator II touch is also available as a pellet + log wood multifuel boiler!
Minimum buffer tank size
Power of Buffer Total
logs volume/kW volume
therminatorII-18 18 kW 55 l/kW 1000 l
therminatorII-27 27 kW 55 l/kW 1500 l
therminatorII-36 36 kW 55 l/kW 1980 l
therminatorII-49 49 kW 55 l/kW 2695 l
therminatorII-60 60 kW 55 l/kW 3300 l
E-mail: [email protected] l www.solarfocus.eu
36 36 49 49 49 60 60 60
68305 68305 68307 68307 68307 68309 68309 68309
68521 68521 68521 68521 68521 68521 68521 68521
1500 - 2 x 1234 2100 - 1235 1000 - 3 x 1232 1500 - 2 x 1234 3000 - 1236 1250 - 3 x 12330 2100 - 2 x 1235 4000 - 1237
2 x 311500 312000 3 x 311000 2 x 311500 313000 2 x 311250 2 x 312000 314000
B0841-2 B0841-3 B0842-1 B0842-2 B0842-3 B0843-1 B0843-2 B0843-3
14,129.- 12,966.- 17,616.- 17,737.- 17,521.- 18,459.- 18,895.- 18,114.-
l The boiler can be equipped with automatic log wood ignition. l Fully automatic cleaning of heat exchangers l Stainless steel filling space
makes you independent
82
Choosing the right fuel
The shrewd decision - heat with biomass!
Log wood boiler – therminator II touch
Price list 2013
83
+
*
*
*
12
E-mail: [email protected] l www.solarfocus.eu
NOTE: If the heating system is
operated without a buffer tank,
it is necessary to fit a hydraulic
switch (page 106).
IMPORTANT:
The use of a return booster module is
a warranty requirement!
Log wood boiler therminator II touch
With boiler, heating circuit andbuffer charge control
Options for visualisation
on smartphones, PCs and tablets!
High-efficiency pump HE: Water quality according to ÖNORM H 5195-1 or VDI Guideline 2035.Also: The medium must be free of air and sludge!
Log wood boiler for log wood of 50 cm in lengthLog boiler consisting of induced draught fan, inclined front loading door,lambda sensor, electronically controlled secondary air supply. Flue gastemperature limitation, grate made from high-grade cast chrome steel,stainless steel filling space, automatic cleaning of heat exchangers,generously dimensioned ash drawer. Flanges welded-in at the factory on the left and right sides of the boiler. Complete with attractive, pre-assembled cover. Doors hinged on left!With boiler control for logs.Regulates the biomass boiler based on output and combustion. Basic versionconsists of: ecomanager-touch, primary air regulation via dosing flap, secondaryair regulation via actuator, digital boiler and flue gas temperature indication,lambda value display.Smooth power control. Output for return booster module.Heating circuit control: Complete with state-of-the-art control, 7” VGA colour touch-screen display, incl. heating circuit control dependent on atmospheric conditions for 1 heatingcircuit, 1 DHW charging circuit and buffer charge control (can be extended tomax. 8 heating circuits with 4 buffer stores and 4 DHW tanks). Complete with sensors.Visualisation and remote maintenance possible via VNC server: All system settings can be modified via smartphone or touch pad (for PC and Mac).
6830168303683056830768309
therminator II touch - 18 Power 18 kWtherminator II touch - 27 Power 27 kWtherminator II touch - 36 Power 36 kWtherminator II touch - 49 Power 49 kWtherminator II touch - 60 Power 60 kW
Thermal return booster modulePre-assembled return booster module to prevent the temperature droppingbelow the dew point and to counteract boiler soot. Opening temperature: 61 °C.Complete with pump, thermal three-way valve and thermometer. Recommendedfor use in buffer charging too, provided that the pump rating is high enough. Incl. insulation.
Automatic ignitionSuitable fuel is ignited as and when necessary via a hot air fan which can beflange-mounted on the boiler to the right of the operating side. Max. ignitiontemperature: 700 °C.
68070 SZ-R for logs to right of operating side
TR Carried out at the factory (e.g. 68303TR)
6850168521
RLA 5/4“ Up to 60 kW 61 °CRLAHE 5/4“ Up to 60 kW 61 °C
Additional Doors hinged on the right Surcharge
8831.-8831.-
10,040.-13,648.-13,648.-
1055.-
181.-
405.-605.-
Return booster module with mixer motorPrevents the temperature dropping below the dew point and counteractsboiler soot. The return temperature is set via the mixer motor by means ofthe ecomanager or ecomanager-touch boiler control. Complete with pumpand motorised three-way mixing valve.
68504685246852568527
RLA 5/4“ Up to 35 kW 25/6 RLAHE 5/4“ Up to 35 kW Yonos/Para 25/1-6 RLAHE 5/4“ 40 - 60 kW Yonos/Para 30/7 RLAHE 6/4“ 60 - 90 kW Stratos/Para 30/8
469.-750.-846.-
1080.-
makes you independent
+
EN 303-5CEN/TC 57
84
Multifuel boiler – therminator II touchTechnical data:
therminator II-22 therminatorII-30 therminatorII-40 therminatorII-49 therminatorII-60
Power [kW] 22 30 40 49 60
Depth* [cm] 102 102 115 136 136
Width* [cm] 62 62 67 83 83
Height* [cm] 152 152 163 163 163
Flue gas pipe DM [cm] 13 13 15 20 20
Height, cent.of flue gas pipe [cm] 75 75 85 92 92
Weight [kg] 534 534 652 777 777
Water content [l] 90 90 126 188 188
Filling space [l] 145 145 186 290 290
Max. length of logs [cm] 56 56 56 66 66
Loading door [cm] 37 x 27 37 x 27 42 x 27 56 x 27 56 x 27
Immersion sleeves f. temp. sensor[„] IT 1/2“ IT 1/2“ IT 1/2“ IT 1/2“ IT 1/2“
Drain [„] ET 1/2“ ET 1/2“ ET 1/2“ ET 1/2“ ET 1/2“
Boiler return [„] ET 11/4“ ET 11/4“ ET 11/4“ ET 11/2“ ET 11/2“
Boiler flow [„] ET 11/4“ ET 11/4“ ET 11/4“ ET 11/2“ ET 11/2“
* Stated dimensions do not include ignition, induced draught fan or flue gas pipe.
Proven cutting-edge technology
l DOWNFIRING COMBUSTIONl High boiler efficiencyl Automatic cleaning of heat exchangers!l Automatic pellet operationl Length of log wood 50 cm
NOTE: A draught stabiliser must be fitted if the required draught is not attained!
If the boiler is operated as a pellet boiler, 30 l/kWbuffer tank volume is required!
Buffer tank sizing!
Power of Power of Buffer Total
pellets logs volume/kW volume
therminatorII-22 22 kW 18 kW 55 l/kW 1000/1500l
therminatorII-30 30 kW 27 kW 55 l/kW 1500 l
therminatorII-40 40 kW 36 kW 55 l/kW 2000 l
therminatorII-49 49 kW 49 kW 55 l/kW 2700 l
therminatorII-60 60 kW 60 kW 55 l/kW 3300 l
YOUR BENEFITS:Electrical pre-installation of all boilers at the factory - the functionality of all
components is tested - supplied “ready to plug in”.
Price list 2013
85
13
E-mail: [email protected] l www.solarfocus.eu
therm
inato
r II-3
0th
erm
inato
r II-2
2th
erm
inato
r II-4
9th
erm
inato
r II-4
0th
erm
inato
r II-6
0
Fuel − Pellets
Power 30 kW Full load Partial load
CO2 % 15.5 11.5
CO mg/m³ 22.6 162.0
HC mg/m³ 1.0 3.0
Nox mg/m³ 105.0 95.4
Dust content mg/m³ 18.9 18.0
Required draught Pa 5 - 10 5 - 10
Flue gas mass flow g/s 15.4 4.7
Max. flue gas temperature °C 140.0* 77.0
Pellet fuel EN 14961-2, ENplus-A1
Technical report therminator II touch multifuel boiler
Pellets + log woodFlue gas values in mg/m³ relate to 13% residual oxygen.
Fuel − Pellets
Power 22 kW Full load Partial load
CO2 % 15.4 10.8
CO mg/m³ 31.0 193.0
HC mg/m³ 1.0 4.0
Nox mg/m³ 110.0 103.0
Dust content mg/m³ 18.0 18.0
Required draught Pa 5 - 10 5 - 10
Flue gas mass flow g/s 11.5 3.8
Max. flue gas temperature °C 140.0* 80.0
Pellet fuel EN 14961-2, ENplus-A1
Fuel − Pellets
Power 49 kW Full load Partial load
CO2 % 16.3 13.9
CO mg/m³ 25.3 207.0
HC mg/m³ 1.0 1.6
Nox mg/m³ 106.0 96.0
Dust content mg/m³ 17.6
Required draught Pa 5 - 10 5 - 10
Flue gas mass flow g/s 24.1 7.7
Max. flue gas temperature °C 140.0* 68.0
Pellet fuel EN 14961-2, ENplus-A1
Fuel − Pellets
Power 40 kW Full load Partial load
CO2 % 15.6 12.2
CO mg/m³ 12.0 131.0
HC mg/m³ 1.0 1.3
Nox mg/m³ 98.0 86.0
Dust content mg/m³ 20.0 18.0
Required draught Pa 5 - 10 5 - 10
Flue gas mass flow g/s 22.2 5.8
Max. flue gas temperature °C 140.0* 73.0
Pellet fuel EN 14961-2, ENplus-A1
Fuel − Pellets
Power 60 kW Full load Partial load
CO2 % 16.5 13.5
CO mg/m³ 17.0 184.0
HC mg/m³ 1.0 1.0
Nox mg/m³ 101.0 107.0
Dust content mg/m³ 17.0 12.0
Required draught Pa 5 - 10 5 - 10
Flue gas mass flow g/s 28.9 10.0
Max. flue gas temperature °C 140.0* 73.4
Pellet fuel EN 14961-2, ENplus-A1
�
* Flue gas temperature can be adjusted electronically!
makes you independent
86
therminator II touch with suction heads and manual or automatic diverter forsuction headsMax. auger length (diverter - boiler) = 15 mMax. auger height (diverter - boiler) = 2.5 m
therminator II touch extraction auger for room extractionMax. auger length = 6 mMay be mounted on the right or left
therminator II touch with pellet box Optionally with:
Pellet box for vacuum extraction with auger transfer unitMax. auger length = 20 m, max. auger height = 5 m
Pellet box for suction head systemMax. auger length = 15 m, max. auger height = 2.5 m
Suitable pellet boxes can be found from page 109 onwards
therminator II touchpellet storage container for manual fillingMay be mounted on the right or left
Multifuel boiler – therminator II touch
Price list 2013
87
13
68220
68220
68220
68220
68220
68521
68521
68521
68521
68521
68070
68070
68070
68070
68070
68314
68316
68318
68320
68322
Choose your system
B68322 13,101.-
B68330 13,310.-
B68340 14,774.-
B68349 18,464.-
B68360 18,464.-
Pellet
bo
iler
feed
er
Ret
urn
bo
ost
er
mod
ule
- HE
+ in
sula
tion
Au
tom
ati
cig
niti
on
therm
inato
rII t
ouch
-22
therm
inato
rII t
ouch
-30
therm
inato
rII t
ouch
-40
therm
inato
rII t
ouch
-49
therm
inato
rII t
ouch
-60
Part
no
.
Pri
ce
therminator II touch multifuel boiler (Pellets + Log wood)
E-mail: [email protected] l www.solarfocus.eu
With boiler, heating circuitand buffer charge control
With boiler, heating circuitand buffer charge control
With boiler, heating circuitand buffer charge control
With boiler, heating circuitand buffer charge control
With boiler, heating circuitand buffer charge control
therminator II
touch 22
therminator II
touch 30
therminator II
touch 40
therminator II
touch 49
therminator II
touch 60
Second heating circuit Part no.: 6150 € 127.-
Commissioning of therminator II touch multifuel boiler Part no.: 6086 € 458.- net price
makes you independent
88
+
Automatic switchover unit from logs to pellets Flange-mounted on the boiler side, opposite the ignition fan. A special motor transmits vibrations (approx. 50 oscillations per second) to thestainless steel combustion grate at adjustable time intervals; path (stroke) ofthe operating rod approx. 6 mm. It is connected via the boiler switchboard. Complete with stainless steel combustion grate.Can be retrofitted* to existing boilers from year of construction 2012 at any time * If the minimum clearance to the wall of 250 mm is observed
therminator II touch – Pellets + log wood
Automatic ignitionSuitable fuel is ignited as and when necessary via a hot air fan which can beflange-mounted on the boiler to the right of the operating side. Max. ignition temperature: 700 °C.
68070 SZ-P for pellets to right of operating side
Blank flange plateFor closing off the flange if no pellet feeder is fitted.
68052 BL-F
Multifuel boilerMultifuel boiler consisting of induced draught fan, inclined front loading door,lambda sensor, electronically controlled secondary air supply. Flue gastemperature limitation, grate made from high-grade cast chrome steel,stainless steel filling space, automatic cleaning of heat exchangers,generously dimensioned ash drawer. Flanges welded-in at the factory on the left and right sides of the boiler. Complete with attractive, pre-assembled cover. Doors hinged on left!With boiler control for automatic operation and logs. Regulates the multifuelboiler based on output and combustion, and controls the automatic materialinfeed via the auger system, ignition via the hot air fan and the fill level.Basic version consists of: ecomanager-touch, primary air regulation viadosing flap, secondary air regulation via actuator, digital boiler and flue gastemperature indication, lambda value display. Smooth power control. Output for return booster module.Heating circuit control: Complete with state-of-the-art control, 7” VGA colour touch-screen display, incl. heating circuit control dependent on atmospheric conditions for 1 heatingcircuit, 1 DHW charging circuit and buffer charge control (can be extended tomax. 8 heating circuits with 4 buffer stores and 4 DHW tanks). Complete with sensors.Visualisation and remote maintenance possible via VNC server: All system settings can be modified via smartphone or touch pad (for PC and Mac).
TR Carried out at the factory (e.g. 68314TR)
Additional Doors hinged on the right Surcharge
IMPORTANT:
Pellet feeder part no. 68220 or 68225 must be ordered separately!
1055.-
65.-
181.-
Options for visualisation
on smartphones, PCs and tablets!
Multifuel boiler – therminator II touch
Price list 2013
With boiler, heating circuit andbuffer charge control
680816808268084
AU 18 - 30 kWAU 36 - 40 kWAU 49 - 60 kW
500.-510.-540.-
6831468316683186832068322
therminator II touch Power 22 kWtherminator II touch Power 30 kWtherminator II touch Power 40 kWtherminator II touch Power 49 kWtherminator II touch Power 60 kW
9478.-9687.-
11,151.-14,841.-14,841.-
89
*
*
*
13
Vacuum system retrofit kit for pellet storage container Retrofit kit for automatic filling of the pellet storage container part no. 6214.With high-performance vacuum turbine, suction pipe, hose clamps and filllevel sensor. Incl. fixing and sealing materials. Software is activated during commissioning by the Service Department.
SS-TN
Manual pellet storage containerAttractive steel container, capacity approx. 250 litres with top loading door formanually filling with bagged goods. May be used on the right or left.With flange for pellet feeder. D x H = 700 mm x 1300 mmCan be retrofitted for vacuum extraction at any time using part no. 6215-N
SP-V400 For manual filling
892.-
1266.-
NOTE: If the heating system is operated without a buffer tank, it is
necessary to fit a hydraulic switch between the flow and return (page 106).
Thermal return booster modulePre-assembled return booster module to prevent the temperature dropping belowthe dew point and to counteract boiler soot. Opening temperature: 61 °C.Complete with pump, thermal three-way valve and thermometer. Recommendedfor use in buffer charging too, provided that the pump rating is high enough. Incl. insulation.
6850168521
RLA 5/4“ Up to 60 kW 61 °CRLAHE 5/4“ Up to 60 kW 61 °C
405.-605.-
therminator II touch return booster modules
Return booster module with mixer motorPrevents the temperature dropping below the dew point and counteractsboiler soot. The return temperature is set via the mixer motor by means of theecomanager or ecomanager-touch boiler control. Complete with pump andmotorised three-way mixing valve.
68504685246852568527
RLA 5/4“ Up to 35 kW 25/6 RLAHE 5/4“ Up to 35 kW Yonos/Para 25/1-7 RLAHE 5/4“ 40 - 60 kW Yonos/Para 30/7 RLAHE 6/4“ 60 - 90 kW Stratos/Para 30/8
469.-750.-846.-
1080.-
Pellet feederConsisting of screw feeder with feeder motor, flange for room extractionand pellet storage container, backburning protection via spring return motor(closed when not under voltage).Complete with sealing and fixing materials.
SP-FS
therminator II touch storage container - manual
IMPORTANT:
The use of a return booster module
is a warranty requirement
for SOLARFOCUS!
1963.-
High-efficiency pump HE: Water quality according to ÖNORM H 5195-1 or VDI Guideline 2035.Also: The medium must be free of air and sludge! E-mail: [email protected] l www.solarfocus.eu
6215-N
6214
68220
makes you independent
90
therminator II touchextraction auger for room extraction
Orderingexample: 6233-10F
Fire protection sleevepart no.: 6137, 6138
Pellet auger for room extractionConsisting of auger with geared motor, auger trough and flange for fixingto the pellet feeder. May be mounted on the right or left. Complete with sealing and fixing materials.Maximum auger length: 6 m.Covered length: 1.0 m; 1.5 m; 2.0 m or 2.5 m (split design).
6232-106233-106233-156234-106234-156234-206234-256235-106235-156235-206235-256236-106236-156236-206236-25
6239
SP-RF-2-10 Auger length 2 m; covered length 1.0 m
SP-RF-3-10 Auger length 3 m; covered length 1.0 m
SP-RF-3-15 Auger length 3 m; covered length 1.5 m
SP-RF-4-10 Auger length 4 m; covered length 1.0 m
SP-RF-4-15 Auger length 4 m; covered length 1.5 m
SP-RF-4-20 Auger length 4 m; covered length 2.0 m
SP-RF-4-25 Auger length 4 m; covered length 2.5 m
SP-RF-5-10 Auger length 5 m; covered length 1.0 m
SP-RF-5-15 Auger length 5 m; covered length 1.5 m
SP-RF-5-20 Auger length 5 m; covered length 2.0 m
SP-RF-5-25 Auger length 5 m; covered length 2.5 m
SP-RF-6-10 Auger length 6 m; covered length 1.0 m
SP-RF-6-15 Auger length 6 m; covered length 1.5 m
SP-RF-6-20 Auger length 6 m; covered length 2.0 m
SP-RF-6-25 Auger length 6 m; covered length 2.5 m
Intermediate section Auger length 0.45 m
F —-Downpipe system
Connection hose for downpipe systemFor connecting the pellet auger to the pellet feeder.Wear-resistant special hose, with metal braid to ensure it is potential-free.Hose inside Ø = 70 mm.
6929169290
S-SV Max. length per piece = 30 m Per running mHose clamp Tensioning range 60 - 80 mm,galvanised steel Per pc.
Additional Ordering example: 6233-10F Surcharge
Auger length
Wall feed-through
Covered length
910.-1223.-1223.-1422.-1422.-1422.-1422.-1620.-1620.-1620.-1620.-1820.-1820.-1820.-1820.-
138.-
39.-
2.-
Multifuel boiler – therminator II touch
Price list 2013
91
13
therminator II touchdirect extraction from the pellet box
F —-Downpipe system
Pellet auger for direct extraction from the pellet box Consisting of auger with geared motor, auger trough and flange for fixing tothe pellet feeder and transfer coupling DM 180 mm for direct fixing to thepellet box. May be mounted on the right or left. Complete with sealing andfixing materials. Maximum auger length: 6 m (split design).
623262336234623562366238
SP-RF-2 Auger length 2 m
SP-RF-3 Auger length 3 m
SP-RF-4 Auger length 4 m
SP-RF-5 Auger length 5 m
SP-RF-6 Auger length 6 m
Intermediate section Auger length 0.45 m
Additional Ordering example: 6232F Surcharge
910.-1223.-1422.-1620.-1820.-
138.-
Pellet extraction auger for vacuum systemConsisting of auger with geared motor, auger trough and connections forvacuum hoses. Integrated backburning protection.Complete with sealing and fixing materials. Maximum auger length: 6 m;covered length: 1.0 m (split design).
6110-106112-106114-106115-106116-10
6239
S-RS-2 Auger length 2 m; covered length 1.0 mS-RS-3 Auger length 3 m; covered length 1.0 mS-RS-4 Auger length 4 m; covered length 1.0 mS-RS-5 Auger length 5 m; covered length 1.0 mS-RS-6 Auger length 6 m; covered length 1.0 mIntermediate section Auger length 0.45 m
830.-1005.-1179.-1353.-1527.-
138.-
therminator II touch with extraction augervacuum system
NOTE:
Additional accessories for storage
areas can be found on page 112
E-mail: [email protected] l www.solarfocus.eu
makes you independent
92
365 mm
therminator II touch with suction heads and manual or automatic diverter for suction heads
Pellet storage container with vacuum system 110 litresAttractive steel container as intermediate container for vacuum extraction, capacity approx. 110 litres with connection nozzles for vacuum and return-airhoses. Pre-assembled with high-performance vacuum turbine, suction pipe,hose clamps and fill level sensor. Can only be used on the left! Incl. fixing and sealing materials. HxWxD = 1246 x 365 x 850 mmSoftware is activated during commissioning by the Service Department.
Pellet feeder L 110Consisting of screw feeder with feeder motor, flange for pellet storagecontainer, backburning protection via spring return motor (closed whennot under voltage).Complete with sealing and fixing materials.
IMPORTANT:
Pellet feeder part no. 68225
can only be used in conjunction
with part no. 6218.
Can ONLY be used on the left!
NOTE:
Part no. 6218 optimal up to 30 kW.
Can ONLY be used on the left!
Multifuel boiler – therminator II touch
NOTE:
Additional accessories for storage areas can be found on page 112
Price list 2013
6218 SP-L110S For vacuum system 1543.-
68225 SP-L 110 1963.-
93
D 700 mm
13
6217 SP-V250-S For vacuum system
Pellet storage container with vacuum system 250 litresAttractive steel container as intermediate container for vacuum extraction, capacity approx. 250 litres with connection nozzles for vacuum and return-airhoses. Pre-assembled with high-performance vacuum turbine, suction pipe,hose clamps and fill level sensor. Can be used on the right or left. Incl. fixingand sealing materials. D x H = 700 mm x 1300 mmSoftware is activated during commissioning by the Service Department.
1743.-
Pellet feederConsisting of screw feeder with feeder motor, flange for room extractionand pellet storage container, backburning protection via spring return motor(closed when not under voltage).Complete with sealing and fixing materials.
68220 SP-FS 1963.-
therminator II touch vacuum system
NOTE:
Can be used on
the left or right!
E-mail: [email protected] l www.solarfocus.eu
Automatic suction head set for pellets, 4-fold, can be extended to 6-foldConsisting of an automatically switchable diverter, four suction heads anda suction head module. With 18 x hose clamp, without vacuum hose!The maximum total length in one direction is 15 m and the maximumpermissible difference in height between the furthest suction head and theboiler is 2.5 m. The minimum bend radius for the vacuum and return-air hosesis 30 cm. The suction head module is connected to the boiler control viaa bus cable 2 x 0.25 mm² (provided by the client).Only in combination with SOLARFOCUS ecomanager-touch.
Manual suction head set for pellets, 4-foldConsisting of a manually switchable diverter and four suction heads. With 16 x hose clamp, without vacuum hose! The maximum total length in onedirection is 15 m and the maximum permissible difference in height betweenthe furthest suction head and the boiler is 2.5 m. The minimum bend radius for the vacuum and return-air hoses is 30 cm.
SOLARFOCUS suction headSuction head for extracting pellets from the storage area. Consisting of onesuction head with 4 x hose clamp, without vacuum hose! With floor fixing materials. The maximum total length of the vacuum hose inone direction is 15 m and the maximum permissible difference in heightbetween the furthest suction head and the boiler is 2.5 m. The minimum bend radius for the vacuum and return-air hoses is 30 cm.
F90 stacking frameIf the thickness of the wall where the automatic diverter for suction heads is tobe mounted is less than 25 cm and the storage area represents a separate firecompartment, the F90 stacking frame must be used to achieve the requiredcoverage of rock wool sheets (rock wool not included).
68190 SM Pc.
68180 SU Pc.
676.-
90.-
68185 SA Pc. 1195.-
68195 AR Pc. 38.-
makes you independent
94
EN 303-5CEN/TC 57
l Gasification technologyl 230 V connectionl Low power consumption (just 232 W/h)l High boiler efficiencyl State-of-the-art control technologyl Automatic cleaning of heat exchangers!l Also ideally suited to logs
Proven cutting-edge technology
YOUR BENEFITS:Electrical pre-installation of all boilers at the factory - the functionality of all
components is tested - supplied “ready to plug in”.
Price list 2013
Wood chip boiler – therminator II touch
therminator II-40 therminator II-49 therminator II-60
Power [kW] 40 49 60
Depth* [cm] 130 151 151
Width* [cm] 67 83 83
Height* [cm] 163 163 163
Flue gas pipe DM [cm] 15 20 20
Height, centre of flue gas pipe[cm] 85 90 90
Weight [kg] 622 780 780
Water content [l] 126 188 188
Filling space [l] 186 290 290
Max. length of wood [cm] 56 66 66
Loading door [cm] 42 x 27 56 x 27 56 x 27Thermal overload protection [„] ET 1/2“ ET 1/2“ ET 1/2“
Immersion sleeves f. temp. sensor [„] IT 1/2“ IT 1/2“ IT 1/2“
Drain [„] ET 1/2“ ET 1/2“ ET 1/2“
Boiler return [„] ET 11/4“ ET 11/2“ ET 11/2“
Boiler flow [„] ET 11/4“ ET 11/2“ ET 11/2“
* Stated dimensions do not include ignition, induced draught fan or flue gas pipe.
Technical data:
95
14
Direct room extraction Downpipe room extraction
Special designs available on request
Technical report therminator II touch wood chip Flue gas values in mg/m³ relate to 13% residual oxygen. The data has been taken from the test reports of the Bundesprüfanstalt für Landtechnik (Federal Testing Laboratory forAgricultural Engineering) in Wieselburg.
therm
inato
r II-4
9 H
Gth
erm
inato
r II-4
0 H
Gth
erm
inato
r II-5
9 H
G
E-mail: [email protected] l www.solarfocus.eu
makes you independent
System variants
Automatic operation - 22.7% water content
Power kW Full load 49.5 kW Partial load 13.85 kW
Boiler efficiency % 93.3 94.4
CO2 % 14.8 12.8
CO mg/m³ 64.0 121.5
HC mg/m³ 1.0 2.5
Dust content mg/m³ 31.0 13.5
Required draught Pa 5 - 10 5 - 10
Flue gas mass flow g/s 26.6 8.7
Max. flue gas temperature °C 140.0* 68.2
Automatic operation - 18.5% water content
Power kW Full load 40 kW Partial load 11.4 kW
Boiler efficiency % 93.2 93.7
CO2 % 14.4 12.5
CO mg/m³ 43 204.0
HC mg/m³ 1.0 4.0
Dust content mg/m³ 18.0 18.0
Required draught Pa 5 - 10 5 - 10
Flue gas mass flow g/s 22.9 7.5
Max. flue gas temperature °C 140.0* 68.4
Automatic operation - 22.7% water content
Power kW Full load 59 kW Partial load 16.3 kW
Boiler efficiency % 93.3 95.0
CO2 % 15.2 13.0
CO mg/m³ 85.0 39.0
HC mg/m³ 1.0 1.0
Dust content mg/m³ 44.0 9.0
Required draught Pa 5 - 10 5 - 10
Flue gas mass flow g/s 30.3 9.9
Max. flue gas temperature °C 140.0* 68.0
* Flue gas temperature can be adjusted electronically!
96
*
*
+
*
therminator II touch wood chip
Wood chip boilerWood chip boiler consisting of induced draught fan, inclined front loading door,lambda sensor, electronically controlled secondary air supply. Flue gastemperature limitation, grate made from high-grade cast chrome steel,stainless steel filling space, automatic cleaning of heat exchangers,generously dimensioned ash drawer. Flanges welded-in at the factory on the left and right sides of the boiler. Complete with attractive, pre-assembled cover. Doors hinged on left!With boiler control for automatic operation and logs. Regulates the wood chipboiler based on output and combustion, and controls the automatic materialinfeed via the auger system, ignition via the hot air fan and the fill level.Basic version consists of: ecomanager-touch, primary air regulation viadosing flap, secondary air regulation via actuator, digital boiler and flue gastemperature indication, lambda value display. Smooth power control. Output for return booster module.Heating circuit control: Complete with state-of-the-art control, 7” VGA colour touch-screen display, incl. heating circuit control dependent on atmospheric conditions for 1 heatingcircuit, 1 DHW charging circuit and buffer charge control (can be extended tomax. 8 heating circuits with 4 buffer stores and 4 DHW tanks). Complete with all sensors.Visualisation and remote maintenance possible via VNC server: All system settings can be modified via smartphone or touch pad (for PC and Mac).
TR Carried out at the factory (e.g. 68334TR)
Additional Doors hinged on the right Surcharge
NOTE: If the heating system is operated without a buffer tank, it is
necessary to fit a hydraulic switch between the flow and return (page 106).
IMPORTANT:
The use of a return booster module
is a warranty requirement
for SOLARFOCUS!
Blank flange plateFor closing off the flange if no wood chip feeder is fitted.
68052 BL-F
Thermal return booster modulePre-assembled return booster module to prevent the temperature dropping belowthe dew point and to counteract boiler soot. Opening temperature: 61 °C.Complete with pump, thermal three-way valve and thermometer. Recommendedfor use in buffer charging too, provided that the pump rating is high enough. Incl. insulation.
6850168521
RLA 5/4“ Up to 60 kW 61 °CRLAHE 5/4“ Up to 60 kW 61 °C
181.-
65.-
405.-605.-
Return booster module with mixer motorPrevents the temperature dropping below the dew point and counteractsboiler soot. The return temperature is set via the mixer motor by means ofthe ecomanager or ecomanager-touch boiler control. Complete with pumpand motorised three-way mixing valve.
6852568527
RLAHE 5/4“ 40 -60 kW Yonos/Para 30/7 RLAHE 6/4“ 60 -90 kW Stratos/Para 30/8
846.-1080.-
Price list 2013
Options for visualisation
on smartphones, PCs and tablets!
Available from April 2013
Wood chip boiler – therminator II touch
With boiler, heating circuit andbuffer charge control
High-efficiency pump HE: Water quality according to ÖNORM H 5195-1 or VDI Guideline 2035.Also: The medium must be free of air and sludge!
683346833668338
therminator II-40-HG Power 40 kWtherminator II-49-HG Power 49 kWtherminator II-60-HG Power 60 kW
13,776.-17,937.-17,937.-
97*
Downpipe setRequired for downpipe extraction.Incl. lower pipe socket (with inspection opening), angle compensation jointand upper pipe socket. Complete with fixing materials.
63240 H-FS
Downpipe for wood chipDownpipe for connecting the auger to the rotary star wheel fitted on thewood chip feeder. Steel pipe 1 m, 2 m, 3 m and 4 m. Complete with bracketsand screws. Must be shortened to the correct length on site!
63310633206333063340
H-FR-1 Length 1 mH-FR-2 Length 2 mH-FR-3 Length 3 mH-FR-4 Length 4 m
Rotary star wheel designed for downpipes (backfiring protection)For wood chip G 30 according to ÖNORM M 7133, designed for backburningprotection, incl. drive motor. Complete with small parts and fixing materials.
63220 H-ZS-F
Wood chip feeder – designed for downpipesSuitable for all therminator II boilers, incl. drive motor and spur gear.Complete with small parts, sealing and fixing materials.
63230 H-ES-F
NOTE:
For the downpipe room extraction system variant:
Use rotary star wheel 63220 instead of 63200.
Use wood chip feeder 63230 instead of 63210.
therminator II touch wood chip – Components specific to downpipes
2281.-
2427.-
103.-152.-199.-250.-
576.-
63210 H-ES For therminator II boiler
Wood chip agitatorAgitator with 2 x progressive leaf spring and bevel gear.Max. feed height: 3 m. Complete with small parts and fixing materials.
6312063125631306313563140
H-RW-20 Agitator diameter 2.0 metresH-RW-25 Agitator diameter 2.5 metresH-RW-30 Agitator diameter 3.0 metresH-RW-35 Agitator diameter 3.5 metresH-RW-40 Agitator diameter 4.0 metres
Rotary star wheel (backfiring protection)For wood chip G 30 according to ÖNORM M 7133, designed for backburningprotection, incl. drive elements. Complete including angle fittings, small partsand fixing materials.
63200 H-ZS
Wood chip feederSuitable for all therminator II wood chip boilers, incl. drive motor and spur gear.Complete with small parts and fixing materials.
E-mail: [email protected] l www.solarfocus.eu
2552.-2600.-2651.-2700.-2750.-
1382.-
2427.-
14
High-efficiency pump HE: Water quality according to ÖNORM H 5195-1 or VDI Guideline 2035.Also: The medium must be free of air and sludge!
makes you independent
98
Wood chip auger for room extractionSolid design for room extraction with geared motor, auger.IMPORTANT:Trough with split design, single-piece auger shaft.Max. fuel value: G 30 according to ÖNORM M 7133.Complete with fixing materials.
63020-1063025-1063025-1563030-1063030-1563030-2063035-1063035-1563035-2063040-1063040-1563040-2063045-1063045-1563045-2063050-1063050-1563050-2063055-1063055-1563055-2063060-1063060-1563060-20
SH-RA-20-10 Auger length 2.0 m; open length 1.0 m
SH-RA-25-10 Auger length 2.5 m; open length 1.0 m
SH-RA-25-15 Auger length 2.5 m; open length 1.5 m
SH-RA-30-10 Auger length 3.0 m; open length 1.0 m
SH-RA-30-15 Auger length 3.0 m; open length 1.5 m
SH-RA-30-20 Auger length 3.0 m; open length 2.0 m
SH-RA-35-10 Auger length 3.5 m; open length 1.0 m
SH-RA-35-15 Auger length 3.5 m; open length 1.5 m
SH-RA-35-20 Auger length 3.5 m; open length 2.0 m
SH-RA-40-10 Auger length 4.0 m; open length 1.0 m
SH-RA-40-15 Auger length 4.0 m; open length 1.5 m
SH-RA-40-20 Auger length 4.0 m; open length 2.0 m
SH-RA-45-10 Auger length 4.5 m; open length 1.0 m
SH-RA-45-15 Auger length 4.5 m; open length 1.5 m
SH-RA-45-20 Auger length 4.5 m; open length 2.0 m
SH-RA-50-10 Auger length 5.0 m; open length 1.0 m
SH-RA-50-15 Auger length 5.0 m; open length 1.5 m
SH-RA-50-20 Auger length 5.0 m; open length 2.0 m
SH-RA-55-10 Auger length 5.5 m; open length 1.0 m
SH-RA-55-15 Auger length 5.5 m; open length 1.5 m
SH-RA-55-20 Auger length 5.5 m; open length 2.0 m
SH-RA-60-10 Auger length 6.0 m; open length 1.0 m
SH-RA-60-15 Auger length 6.0 m; open length 1.5 m
SH-RA-60-20 Auger length 6.0 m; open length 2.0 m
NOTE:
The trough is divided into 1 m
and 1/2 m sections.
The auger shaft is always supplied
in one full-length piece!
GT Carried out at the factory (e.g. 63060-10GT)The auger shaft must be welded on site. Always separated into two equal pieces.
Additional Split auger shaft
Wood chip auger
133.-
2290.-2418.-2418.-2546.-2546.-2546.-2674.-2674.-2674.-2802.-2802.-2802.-2929.-2929.-2929.-3058.-3058.-3058.-3186.-3186.-3186.-3314.-3314.-3314.-
Agitator diameter
Open length
Auger length
Price list 2013
Wood chip boiler – therminator II touch
99
14
Wood chip transport augerSolid design for room extraction with geared motor, auger and anglecompensation joint.IMPORTANT:Trough with split design, single-piece auger shaft.Max. fuel value: G 30 according to ÖNORM M 7133.Complete with fixing materials.
630206302563030630356304063045630506305563060
SH-SS-20 Auger length 2.0 mSH-SS-25 Auger length 2.5 mSH-SS-30 Auger length 3.0 mSH-SS-35 Auger length 3.5 mSH-SS-40 Auger length 4.0 mSH-SS-45 Auger length 4.5 mSH-SS-50 Auger length 5.0 mSH-SS-55 Auger length 5.5 mSH-SS-60 Auger length 6.0 m
GT Carried out at the factory (e.g. 63060GT)The auger shaft must be welded on site.Always separated into two equal pieces.
NOTE:
The trough is divided into 1 m
and 1/2 m sections.
The auger shaft is always supplied
in one full-length piece!
Additional Split auger shaft Surcharge
NOTE:
Transport auger for transporting
the goods over longer distances.
To be ordered in addition to the normal
wood chip auger if necessary!
E-mail: [email protected] l www.solarfocus.eu
2290.-2418.-2546.-2647.-2802.-2929.-3058.-3186.-3314.-
133.-
Wood chip transport auger
Transport auger
Auger for room extraction
makes you independent
100
Wood chip – Fast-refill auger
63400 ATR-BBS
Ordering example: Fast-refill auger
1 x 634004.8 x 634103.26 x 63420
Drive and storage unitFast-refill auger shaft in mAuger helix length in m
63410 H-BSL-BBS Per running m.
Example Fast-refill auger length = 4.8 mAuger helix length = 3.26 m
Fast-refill auger shaft - length 2.0 to 6.0 m
Auger helix - length up to 5.5 m
63420 H-SBL-BBS Per running m.
63430 H-ASK-BBS
NOTE: The fast-refill auger can be custom-made.
Lead time approx. 4 - 6 weeks.
Drive and storage unitWith high-performance 4 kW drive motor. Complete incl. initial, central and end storage.
Fast-refill auger shaft Precision steel pipe DM 60 mm, max. length 6 m. Length of the complete fast-refill auger stated in m.
IMPORTANT: Electrical connection including the emergency-off switches as well as
a protection grid over the shaft must be provided on site!
Auger helixAuger DM 250 mm, max. length 5.5 m.Length of the auger helix stated in m.
NOTE: The fast-refill auger serves to
refill the storage area with wood chip.
The auger is custom-made and
supplied according to the specifications
you provide on your order!
Fast-refill auger circuit box Incl. lockable main switch, motor overload switch and 2 emergency-off switches
2768.-
97.-
103.-
359.-
Price list 2013
Wood chip boiler – therminator II touch
101
14
Filling and suction pipes for wood chipLength: 1 m each, Ø = 150 mm. With Storz coupling DIN 150 incl. dummy cover
63250 H-EA-R 1 set for wood chip
Extinguisher For connection to the wood chip feeder.
63270 H-TS
ServicesWe will plan a system tailored to your needs, produce the submission plansfor the biomass heating system and support you during building negotiations(on request).
NOTE: The installation of a temperature monitoring device in the storage area
can be stipulated by the local fire authority!
Temperature monitoring unitFor monitoring the temperature in the storage container or the fuel storage area.A warning device triggers if the temperature exceeds approx. 70 °C.Connection: 230 V
65656567
With acoustic warning deviceWith acoustic & visual warning device
Wood chip accessories
Extinguisher set For connection to the wood chip feeder. Consisting of: thermal switch withopening temperature of 50 °C, water vessel, fill level sensor, connecting hose,wall mounting incl. fixing material.
NOTE: The backfiring protection set is used if, for example, there is no extinguishing
water available in the event of a power failure.
6326063265
H-TS-D Direct Opening temperature 50 °CH-TS-F Downpipe Opening temperature 95 °C
NOTE: The installation of an automatic extinguisher on the feeder can be
stipulated by the local fire authority. If this does not need to be installed,
the connection openings on the feeder should be sealed.
543.-
574.-
133.-133.-
310.-457.-
E-mail: [email protected] l www.solarfocus.eu
Fuel specification for wood chip
Fuel specification: G 30/W 30 according to ÖNORM M 7133Energy content: 1 kg wood chips has a calorific value of approx. 3.3 - 4.2 kWhWeight of 1 m³ wood chips: 170 - 280 kgMoisture content: 25% maximum
makes you independent
*
*102
*
Fresh water module – without circulation Hygienic DHW preparation via generously dimensioned stainless steel plateheat exchanger using the flow-through principle. The fresh water module is usedwhere low return temperatures are desired. The ecomanager or ecomanager-touch regulates the system so that a constant DHW temperature can beachieved with varying flow temperatures and varying volumetric flows. Optimumstratification of the heating water in the buffer tank through use of a speed-controlled pump and an ultra-fast PT 1000 sensor. Power supply: 230 V,complete with controller and flushing unit, installed and wired on a mountingpanel. All connections for fitting a circulation connection set are included. Conforms to DVGW (German Technical and Scientific Association for Gasand Water) regulations.
Fresh water module with high-efficiency pump – without circulation Hygienic DHW preparation via generously dimensioned stainless steel plate heatexchanger using the flow-through principle. The fresh water module is used wherelow return temperatures are desired. The ecomanager or ecomanager-touchregulates the system so that a constant DHW temperature can be achieved withvarying flow temperatures and varying volumetric flows. Optimum stratification ofthe heating water in the buffer tank through use of a speed-controlled high-efficiency pump and an ultra-fast PT 1000 sensor. Power supply: 230 V, completewith controller and flushing unit, installed and wired on a mounting panel.All connections for fitting a circulation connection set are included. Conforms to DVGW (German Technical and Scientific Association for Gasand Water) regulations.
Fresh water module with high-efficiency pump – without circulation,with stainless steel/nickel soldered plate heat exchanger Hygienic DHW preparation via generously dimensioned stainless steel/nickelsoldered plate heat exchanger using the flow-through principle. The fresh watermodule is used where low return temperatures are desired. The ecomanager orecomanager-touch regulates the system so that a constant DHW temperaturecan be achieved with varying flow temperatures and varying volumetric flows.Optimum stratification of the heating water in the buffer tank through use ofa speed-controlled high-efficiency pump and an ultra-fast PT 1000 sensor. Power supply: 230 V, complete with controller and flushing unit, installed andwired on a mounting panel. All connections for fitting a circulation connectionset are included. Conforms to DVGW (German Technical and ScientificAssociation for Gas and Water) regulations.
Price list 2013
NOTE:
Fresh water modules with a flow rate of
50 l and above: lead time approx. 4 weeks
IMPORTANT:
A water quality test must be performed
prior to installation. If the water’s
electrical conductivity exceeds the limit
value, a stainless steel/nickel soldered
plate heat exchanger must be used.
Request the data sheet on water quality
for more information!
Modules for higher flow rates
with stainless steel/nickel soldered
plate heat exchangers are available
on request.
Fresh water module – ecomanager and e comanager-touch
electronically controlled with and without high-efficiency pump
High-efficiency pump HE: Water quality according to ÖNORM H 5195-1 or VDI Guideline 2035.Also: The medium must be free of air and sludge!
FRESH WATERSYSTEM
118328118337118350118375118395
FWM 26 O 26 l/min 3/4”, incl. electr. separation Per pc.FWM 40 O 40 l/min 3/4”, incl. electr. separation Per pc.FWM 50 O 50 l/min 1” Per pc.FWM 75 O 75 l/min 5/4” Per pc.FWM 95 O 95 l/min 5/4” Per pc.
1495.- 1890.- 2861.- 4941.-5500.-
118526118540118550118563118575118595
FWM 26 HEO 26 l/min 3/4”, incl. electr. separation Per pc.FWM 40 HEO 40 l/min 3/4”, incl. electr. separation Per pc.FWM 50 HEO 50 l/min 1” Per pc.FWM 63 HEO 63 l/min 1” Per pc.FWM 75 HEO 75 l/min 5/4” Per pc.FWM 95 HEO 95 l/min 5/4” Per pc.
1740.- 2095.- 3120.- 4416.- 5295.-5845.-
118328E118337E118528E118537E
FWME 26 O 26 l/min 3/4” incl. electr. separation Per pc.FWME 40 O 40 l/min 3/4” incl. electr. separation Per pc.FWME 26 HEO26 l/min 3/4” incl. electr. separation Per pc.FWME 40 HEO40 l/min 3/4” incl. electr. separation Per pc.
1945.- 2440.- 2428.- 2645.-
NOTE: A thermal mixing valve must be installed for fresh
water modules HE!
* High-efficiency pump* 103
*
15
E-mail: [email protected] l www.solarfocus.eu
Circulation connection set with flushing unitCirculation pump set for installation in the fresh water module (time and temperature-controlled). Conforms to DVGW (German Technical and Scientific Association for Gasand Water) regulations. Power supply via controller 230 V
Cover Attractive cover plate, incl. installation and fixing materials.
EPP cover Attractive cover made of EPP with high mechanical and thermal strength (-40 to +110 °C) and low thermal conductivity.
TIP: Install a thermostatic mixing valve part no. 1887, 1889 to avoid scaling of the
fresh water heat exchanger.
Thermal mixing valve (from FWM 50)Consisting of: 3-way mixing valve, temperature controller, with 2 m contactsensor (50 to 80 °C), threaded nozzles 1” or 6/4” (1 set = 3 pcs.). 2 inlets,1 outlet. As it flows through the valve, the medium is mixed depending onthe position of the valve disc.
1889 TMV DN40 6/4” ET Per pc. 390.-
Thermostatic mixing valve DN 25 incl. insulation (up to FWM 40)The thermostatic mixing valve ensures a constant supply temperature tothe fresh water module. Control range 20 - 70 °C. Optimum use with freshwater modules. Incl. backflow inhibitor in cold water and DHW feed.
1887 TTMV DN25 1” ET Per pc. 172.-
Insulation setCorrosion protection for DHW tanks and fresh water modules. Must be installed in the solar flow/return for ribbed-tube heat exchangers andfor FWM in mixed installations in the DHW area for the cold and hot waterflow and for the circulation.
High-efficiency pump HE: Water quality according to ÖNORM H 5195-1 or VDI Guideline 2035.Also: The medium must be free of air and sludge!
Part no.: 118152
Part no.: 118141
Part no.: 118155
NOTE: When using circulation,
a sanitary expansion vessel
part no. 1552 must also be used!
118155118158
AFM For FWM 50, 63 + SLM 60, 80 Per pc.AFM For FWM 75, 95 + SLM 100, 150 Per pc.
118152 AFMEPP For FWM 26, 40 + SLM 20, 40 Per pc.
133.-144.-
127.-
131213171318
ISO-SET 1“ 1 pairISO-SET 5/4“ 1 pairISO-SET 6/4“ 1 pair
127.-190.-489.-
118140118142118141118242118243
ZM for FWM 26 and 40 - 3/4” IT Per pc.ZM for FWM 50, 63, 75, 95 - 1” IT Per pc.ZM HE for FWM 26 and 40 - 3/4” IT Per pc.ZM HE for FWM 50, 63, 75, 95 - 1” IT Per pc.ZM HE for FWM 150 and 250 - 5/4” IT Per pc.
415.-755.- 338.-
1180.-3205.-
makes you independent
104
*
*
Solar stratified charging module with fast charging mode forecomanager and e comanager-touch
NOTE: The expansion vessel for your solar and heating system
has to be ordered separately!
NOTE: Stratified charging module from 40 m2,
lead time approx. 4 weeks
Solar stratified charging module with fast charging modeFor the optimum charging of the buffer tank in two levels. With 2 integratedmotor switching valves allowing for the fast charge of the upper buffer tanklevel. The ecomanager or ecomanager-touch takes over the control function.Power supply: 230 V. Incl. sensors, 2 motor switching valves, generouslydimensioned stainless steel plate heat exchanger. Primary and secondarypumps are speed-controlled. Ready to plug in. Primary: flush/fill tap, non-return valve, safety group 6 bar, connections for expansion vessel,both circuits manually controllable via adjustable valve. Max. operatingpressure 6 bar. Operating temperature max. 95 °C, min. 2 °C.
Solar stratified charging module with fast charging mode and high-efficiency pumps Speed-controlled high-efficiency primary and secondary pump. Ready to plug in.For the optimum charging of the buffer tank in two levels. With 2 integratedmotor switching valves allowing for the fast charge of the upper buffer tanklevel. The ecomanager or ecomanager-touch takes over the control function.Power supply: 230 V. Incl. sensors, 2 motor switching valves, generouslydimensioned stainless steel plate heat exchanger. Ready to plug in. Primary:flush/fill tap, non-return valve, safety group 6 bar, connections for expansionvessel, both circuits manually controllable via adjustable valve. Max. operating pressure 6 bar. Operating temperature max. 95 °C, min. 2 °C.
119331S119332S119333S119334S119335S119336S
SLMECO 20 Up to 20 m2 collector area Per pc.SLMECO 40 Up to 40 m2 collector area Per pc.SLMECO 60 Up to 60 m2 collector area Per pc.SLMECO 80 Up to 80 m2 collector area Per pc.SLMECO 100 Up to 100 m2 collector area Per pc.SLMECO 150 Up to 150 m2 collector area Per pc.
119431S119432S119433S119434S119435S119436S
SLMECOHE 20 Up to 20 m2 collector area Per pc.SLMECOHE 40 Up to 40 m2 collector area Per pc.SLMECOHE 60 Up to 60 m2 collector area Per pc.SLMECOHE 80 Up to 80 m2 collector area Per pc.SLMECOHE 100 Up to 100 m2 collector area Per pc.SLMECOHE 150 Up to 150 m2 collector area Per pc.
2261.- 2513.- 3626.-4203.-4702.-7488.-
2812.- 3064.- 4172.-4748.-5258.-8137.-
Cover Attractive cover plate, incl. installation and fixing materials.
119155119158
AFM For FWM 50, 63 + SLM 60, 80 Per pc.AFM For FWM 75, 95 + SLM 100, 150 Per pc.
EPP cover Attractive cover made of EPP with high mechanical and thermal strength (-40 to +110 °C) and low thermal conductivity.
118301 AFMEPP For FWM 26, 40 + SLM 20, 40 Per pc.
133.-144.-
127.-
Part no.: 118301Part no.: 119155 Electronic heat meter ecomanager and ecomanager-touch
With integrated temperature measurement and electronic flow measurement. Measurement of the medium temperature from -40 to +100 °C.Can only be used in conjunction with boiler control ecomanager andecomanager-touch for heat metering with the solar stratified charging module!
119344119345
WMZECO 2 - 32 l/min up to 40 m² 3/4“ ET Per pc.WMZECO 4 - 50 l/min up to 150 m2 1“ ET Per pc.
198.-214.-
Price list 2013High-efficiency pump HE: Water quality according to ÖNORM H 5195-1 or VDI Guideline 2035.
Also: The medium must be free of air and sludge!
105
*
*
*
*
16
Unmixed charge pump setFor Buffer tank charging or for an unmixed heating circuit. Consisting oftwo ball valves, gravity brake, two dial thermometers and pump. Completewith EPP half-shell insulation, temperature-resistant to 130 °C and with wallmounting. Distance between axes: DN25/32 = 125 mm, for DN20 = 100 mmW/H/D: DN25/32 = 250 x 420 x 246 mm, for DN20 = 230 x 360 x 185 mm68571: up to 42 kW (Dt = 20 °K), 68572 and 68576: up to 40 kW (Dt = 20 °K),68577: up to 60 kW (Dt = 20 °K)
Mixed heating circuit pump set For one mixer-controlled heating circuit. Consisting of pump, three-way mixer,actuator, two ball valves, gravity brake, dial thermometer and wall mounting.Complete with EPP half-shell insulation, temperature-resistant to 130 °C.Actuator: 230 V/50 Hz, 140 sec/90°, 6 Nm. Distance between axes: DN25/32= 125 mm, for DN20 = 100 mmW/H/D: DN25/32 = 250 x 420 x 246 mm, for DN20 = 230 x 360 x 185 mm68581: up to 36 kW (Dt = 20 °K), 68582 and 68586: up to 33 kW (Dt = 20 °K), 68587: up to 45 kW (Dt = 20 °K)
Heating pumps
Manifold DN25/DN32 for 3, 5 or 7 heating circuitsWith 2, 3 and 4 connector pairs to the top and bottom. EPP insulation, suitable for pump set DN25 and DN32. Heating circuit connection: flat-seal incl. 6/4” union nut, boiler connection: flat-seal 6/4” ET. For output up to 70 kW (Dt = 20°K).
68545-368545-568545-7
VB-3 2 heating circuits + 1 to bottom Pc.VB-5 3 heating circuits + 2 to bottom Pc.VB-7 4 heating circuits + 3 to bottom Pc.
203.-276.-350.-
Manifold DN20 for 2 or 3 heating circuitsIncl. 1“ union nut for flat-seal connection, with EPP insulation and wall mount.
68572
68571
68576
68577
S-LPS-25 RS 25/6-180 DN25 Pc.Bottom connection: 2 x 6/4“ ET fl. seal Top connection: 2 x 1” IT
S-LPSHE-20 Yonos RKA 15/1-6 DN20 Pc.Bottom connection: 2 x 1“ ET fl. seal Top connection: 2 x 1” ET
S-LPSHE-25 Para 25/1-7-180 DN25 Pc.Bottom connection: 2 x 6/4“ ET fl. seal Top connection: 2 x 1” IT
S-LPSHE-32 Para 30/1-7-180 DN32 Pc.Bottom connection: 2 x 6/4“ ET fl. seal Top connection: 2 x 5/4” IT
270.-
360.-
395.-
495.-
68582
68581
68586
68587
S-HPSG-25 RS 25/6-180 DN25 Bottom connection: 2 x 6/4“ ET fl. seal Top connection: 2 x 1” IT Pc.S-HPSGHE-20 Yonos RKA 15/1-7 DN20 Bottom connection: 2 x 1“ ET fl. seal Top connection: 2 x 1” ET Pc.S-HPSGHE-25 Para 25/1-7-180 DN25 Bottom connection: 2 x 6/4“ ET fl. seal Top connection: 2 x 1” IT Pc.S-HPSGHE-32 Para 30/1-7-180 DN32 Bottom connection: 2 x 6/4“ ET fl. seal Top connection: 2 x 5/4” IT Pc.
615086151061523615256152161520
1518
HP RS 25/6-180 DN25 1 1/2” ET Pc.HP RS 30/6-180 DN30 2” ET Pc.HPHE Para 25/1-7-180 DN25 6/4” ET Pc.HPHE Para 30/1-7-180 DN30 2” ET Pc.HPHE Stratos ECO 25/1-5-130 DN25 6/4” ET Pc.HPHE Stratos ECO 25/1-5-180 DN25 6/4” ET Pc.HPHE Para 25/1-7-130 6/4” ET Pc.
384.-
460.-
515.-
640.-
123.-133.-606.-641.-370.-343.-607.-
68535-268535-3
VB-22 2 heating circuits Pc.VB-23 3 heating circuits Pc.
220.-255.-
NOTE:
Observe the ErP Directive!
E-mail: [email protected] l www.solarfocus.euHigh-efficiency pump HE: Water quality according to ÖNORM H 5195-1 or VDI Guideline 2035.
Also: The medium must be free of air and sludge!
Pump sets
makes you independent
106
Wall mount for manifold DN25 and DN32For mounting the manifold on a wall. 2 x mount with screws and dowels.
68540 WH-VB 2 pcs. 46.-
Pump sets and heating technology accessories
Expansion vessel for heatingStanding vessel for use in enclosed heating systems according to EN 12828.Pre-pressure: 1.5 bar; system temp.: -10 °C to +110 °C; max. membranetemperature: +70 °C; max. operating pressure: 6 bar; colour: red. With adjustable feet for sizes above 50 l.
Compression fittingScrew connection for pump set DN25 or DN32
68513-DN2568513-DN32
ÜV-28 1” x 28 mm Pc.ÜV-35 5/4” x 35 mm Pc.
Fitting setTo use for connection if the pump set is not fitted to the manifold!Consisting of: 2 x union nut, 2 x seal, 2 x insert
Boiler safety groupMembrane safety valve: 3 bar. Fast vent and manometer with shut-offmechanism. Incl. insulation.
Thermal overload protection To protect the boiler from overheating. Opening temperature 95 °C
6553 SZ-TS Pc.
Temperature monitoring unitFor monitoring the temperature in the storage container or the fuel storage area.A warning device triggers if the temperature exceeds approx. 70 °C.Connection: 230 V
65656567
SR-KTÜG-O With visual warning device Pc.SR-KTÜG-A With acoustic + visual warning device Pc.
9.-18.-
92.-
Hydraulic switch For isolating the deliveries in the boiler and heating circuits, combined withair separator and dirt/sludge trap DN 32.Boiler flow and return connection: 2” flat-seal union nut.Heating circuit flow and return connection: 6/4” flat-seal union nut.Maximum permissible temperature 110 °C
310.-457.-
TIP:
The volume of the
expansion vessel
should be approx.
12% of the buffer
volume plus
heating system
volume!
68512-DN2068514-DN2568514-DN32
VS 1” union nut x 1” ET SetVS-1 6/4” union nut x 1” IT SetVS-5/4 6/4” union nut x 5/4” IT Set
26.-15.-31.-
Price list 2013
Part no.: 6548
Part no.: 68591
Magnetite separator For hydraulic switch
Part no.: 6558
Part no.: 68590
1554H1556H1557H1558H1559H1564H1561H1563H1562H
ADG-50 DxH: 409 x 485 mm, 3/4” Pc.ADG-80 DxH: 480 x 554 mm, 1” Pc.ADG-100 DxH: 480 x 660 mm, 1” Pc.ADG-140 DxH: 480 x 902 mm, 1” Pc.ADG-200 DxH: 634 x 760 mm, 1” Pc.ADG-250 DxH: 634 x 890 mm, 1” Pc.ADG-300 DxH: 634 x 1060 mm, 1” Pc.ADG-400 DxH: 740 x 1060 mm, 1” Pc.ADG-500 DxH: 740 x 1290 mm, 1” Pc.
88.-141.-205.-236.-277.-370.-472.-574.-769.-
65486558
S-MVE Up to 50 kW Pc.S-MVE Up to 100 kW Pc.
40.-168.-
68590 HW Up to 70 kW Pc. 290.-
68591 MA Per pair 185.-
107
16
107E-mail: [email protected] l www.solarfocus.eu
Service coupling For the inspection, maintenance and, where necessary, replacement ofexpansion vessels. With sealing device and drain. Nominal pressure: 10 bar. Max. operating temperature: 120 °C
1566 KV 1” IT Pc. 39.-
Heating technology accessories
6657066570NIRO
6657166571NIRO
6657266572NIRO
6657366573NIRO
Black flue gas pipe, sleeved DM 130Stainless steel flue gas pipe DM 130Black flue gas pipe, sleeved DM 150Stainless steel flue gas pipe DM 150Black flue gas pipe, sleeved DM 180Stainless steel flue gas pipe DM 180Black flue gas pipe, sleeved DM 200Stainless steel flue gas pipe DM 200
Sleeved flue gas pipeFlue gas pipe, black painted steel or stainless steel. Length: 1000 mm
6657666576NIRO
6657766577NIRO
6657866578NIRO
6657966579NIRO
Black flue gas pipe, sleeved DM 130Stainless steel flue gas pipe DM 130Black flue gas pipe, sleeved DM 150Stainless steel flue gas pipe DM 150Black flue gas pipe, sleeved DM 180Stainless steel flue gas pipe DM 180Black flue gas pipe, sleeved DM 200Stainless steel flue gas pipe DM 200
Sleeved flue gas pipeFlue gas pipe, black painted steel 500 mm or stainless steel. Length: 420 mm
6658066580NIRO
6658166581NIRO
6658266582NIRO
6658366583NIRO
90° flue gas pipe elbow, black, sleeved DM 13090° flue gas pipe elbow, stainless steel DM 13090° flue gas pipe elbow, black, sleeved DM 15090° flue gas pipe elbow, stainless steel DM 15090° flue gas pipe elbow, black, sleeved DM 18090° flue gas pipe elbow, stainless steel DM 18090° flue gas pipe elbow, black, sleeved DM 20090° flue gas pipe elbow, stainless steel DM 200
90° flue gas pipe – sleeved elbow, adjustable 0 - 90°Flue gas pipe elbow with cleaning door, black painted steel or stainless steel.
33.7075.-34.7085.-35.7097.-42.80
111.-
21.4040.-22.5047.-23.5055.-28.6061.-
38.8096.-41.80
110.-43.90
122.-47.90
129.-
6648066480 NIRO
6648166481NIRO
6648266482NIRO
6648366483NIRO
45° flue gas pipeFlue gas pipe elbow, black painted steel or stainless steel.
33.7037.8036.7044.-41.8054.-47.9067.-
Ash boxUsed as an intermediate container between the vacuum cleaner andsuction pipe. May be connected to any vacuum cleaner - particularly suitablefor ash, earth, sawdust and sand. Suction pipe connection: DM 32 - 36 mm
6700 AS Pc. 49.-
45° flue gas pipe elbow, black DM 13045° flue gas pipe elbow, stainless steel DM 13045° flue gas pipe elbow, black DM 15045° flue gas pipe elbow, stainless steel DM 15045° flue gas pipe elbow, black DM 18045° flue gas pipe elbow, stainless steel DM 18045° flue gas pipe elbow, black DM 20045° flue gas pipe elbow, stainless steel DM 200
Steel = 2 mm, painted black
Stainless steel V4A = 0.6 mm
makes you independent
108
6659466594NIRO
6659566595NIRO
6659666596NIRO
6659866598NIRO
Draught stabiliser with explosion flap DM 130Stainless steel draught stabiliser with exp. flap DM 130Draught stabiliser with explosion flap DM 150Stainless steel draught stabiliser with exp. flap DM 150Draught stabiliser with explosion flap DM 180Stainless steel draught stabiliser with exp. flap DM 180Draught stabiliser with explosion flap DM 200Stainless steel draught stabiliser with exp. flap DM 200
Draught stabiliser with explosion flapFor regulating the draught in the chimney. Mounted on the flue gas pipe. Black painted steel or stainless steel. Incl. T-piece
275.-302.-294.-334.-306.-363.-358.-504.-
NIRO
Heating technology accessories
Heat-resistant silicon cartridge of 310 ml; heat-resistant to 300 °C.
6577 SH Pc. 20.-
Connection clamp for flue gas pipe (steel)For fixing the flue gas pipe to the boiler (also serves as sound-proofing).
66586665876658866589
Flue gas pipe bracket DM 130Flue gas pipe bracket DM 150Flue gas pipe bracket DM 180Flue gas pipe bracket DM 200
17.5018.-19.5021.-
6656066560NIRO
6656166561NIRO
6656266562NIRO
6656366563NIRO
Double wall feed-throughDouble wall feed-through, black painted steel or stainless steel.
21.5031.-23.5039.-24.5046.-32.5047.-
Double wall feed-through, black DM 130Double wall feed-through, stainless steel DM 130Double wall feed-through, black DM 150Double wall feed-through, stainless steel DM 150Double wall feed-through, black DM 180Double wall feed-through, stainless steel DM 180Double wall feed-through, black DM 200Double wall feed-through, stainless steel DM 200
Price list 2013
109
NOTE:
Vacuum refill and
return-air couplings are
NOT included with the
pellet box!
17
Pellet storage
Vacuum extraction
With suction head
E-mail: [email protected] l www.solarfocus.eu
Auger
makes you independent
Pellet box for vacuum extraction with auger transfer unit – height-adjustableConsisting of: galvanised steel frame and steel floor, packed as individualcomponents, flexible silo in durable anti-static material, geared motor, transferunit, auger and auger bearing with cover. The maximum total length in onedirection is 20 m and the maximum permissible difference in height betweenthe discharge point and the boiler is 5 m. The minimum bend radius is 30 cm.
6679S
6672S
6673S
6682S
6685S
6686S
PBS-17 Square, volume: 2.1 - 3.2 t, L/W dimensions: 170 cm,
H = var.: 180 - 250 cm, weight: approx. 225 kg Pc.
PBS-21 Square, volume: 2.8 - 4.7 t, L/W dimensions: 210 cm,
H = var.: 180 - 250 cm, weight: approx. 285 kg Pc.
PBS-25 Square, volume: 4.2 - 6.7 t, L/W dimensions: 250 cm,
H = var.: 180 - 250 cm, weight: approx. 325 kg Pc.
PBS-29 Square, volume: 6.0 - 9.0 t, L/W dimensions: 290 cm,
H = var.: 190 - 250 cm, weight: approx. 425 kg Pc.
PBS-17/29 Rectangular, volume: 3.6 - 5.4 t, L/W dimensions: 170 x 290 cm,
H = var.: 190 - 250 cm, weight: approx. 325 kg Pc.
PBS-21/29 Rectangular, volume: 3.8 - 6.1 t, L/W dimensions: 210 x 290 cm,
H = var.: 190 - 250 cm, weight: approx. 385 kg Pc.
Pellet box for suction head system – height-adjustableConsisting of: galvanised steel frame and steel floor, packed as individualcomponents, flexible silo in durable anti-static material, transfer unit andsuction head. The maximum total length in one direction is 10 m and themaximum permissible difference in height between the suction head and theboiler is 2 m. The minimum bend radius is 30 cm.
6679SS
6672SS
6673SS
6682SS
6685SS
6686SS
PBSS-17 Square, volume: 2.1 - 3.2 t, L/W dimensions: 170 cm,
H = var.: 180 - 250 cm, weight: approx. 225 kg Pc.
PBSS-21 Square, volume: 2.8 - 4.7 t, L/W dimensions: 210 cm,
H = var.: 180 - 250 cm, weight: approx. 285 kg Pc.
PBSS-25 Square, volume: 4.2 - 6.7 t, L/W dimensions: 250 cm,
H = var.: 180 - 250 cm, weight: approx. 325 kg Pc.
PBSS-29 Square, volume: 6.0 - 9.0 t, L/W dimensions: 290 cm,
H = var.: 190 - 250 cm, weight: approx. 425 kg Pc.
PBSS-17/29 Rectangular, volume: 3.6 - 5.4 t, L/W dimensions: 170 x 290 cm,
H = var.: 190 - 250 cm, weight: approx. 325 kg Pc.
PBSS-21/29 Rectangular, volume: 3.8 - 6.1 t, L/W dimensions: 210 x 290 cm,
H = var.: 190 - 250 cm, weight: approx. 385 kg Pc.
Manual fill pellet box SS for vacuum extraction 0.66 tPellet box for manual filling. Galvanised steel container, extraction unit with onesuction head. Storage volume 1 m³ or 660 kg. Dimensions: LxWxH 100 x 100 x130 cm. The maximum total length in one direction is 10 m and the maximumpermissible difference in height between the suction head and the boiler is 2 m.The minimum bend radius for the vacuum and return-air hoses is 30 cm.
6680SS PBSSM Pc.
Pellet box for direct auger – height-adjustableGalvanised steel frame and steel floor, packed as individual components,flexible silo in durable anti-static material. Transfer flange.
6679D
6672D
6673D
6682D
6685D
6686D
PBD-17 Square, volume: 2.1 - 3.2 t, L/W dimensions: 170 cm,
H = var.: 208 - 278 cm, weight: approx. 225 kg Pc.
PBD-21 Square, volume: 2.8 - 4.7 t, L/W dimensions: 210 cm,
H = var.: 208 - 278 cm, weight: approx. 285 kg Pc.
PBD-25 Square, volume: 4.2 - 6.7 t, L/W dimensions: 250 cm,
H = var.: 208 - 278 cm, weight: approx. 325 kg Pc.
PBD-29 Square, volume: 6.0 - 9.0 t, L/W dimensions: 290 cm,
H = var.: 218 - 278 cm, weight: approx. 425 kg Pc.
PBD-17/29 Rectangular, volume: 3.6 - 5.4 t, L/W dimensions: 170 x 290 cm,
H = var.: 218 - 278 cm, weight: approx. 325 kg Pc.
PBD-21/29 Rectangular, volume: 3.8 - 6.1 t, L/W dimensions: 210 x 290 cm,
H = var.: 218 - 278 cm, weight: approx. 385 kg Pc.
2745.-
3024.-
3304.-
4198.-
3487.-
4004.-
2228.-
2593.-
2895.-
3864.-
3089.-
3649.-
1324.-
2099.-
2378.-
2659.-
3552.-
2831.-
3358.-
110
Pellet storage
Manual fill pellet box S for direct auger 0.5 tFor manual filling of the pellet box! Galvanised steel container with steel coneand extraction unit DN180, transfer flange. Storage volume: 0.76 m³ or 500 kg, dimensions: LxWxH 100 x 100 x 130 cm
6680D PBDM Pc.
Extension frame for pellet box S and pellet box SSFor extending the pellet box by 30 cm or 0.3 m³/195 kg, dimensions: LxWxH 100 x 100 x 30 cm
6681 PBE Pc.
66706671
EFA-8000 Storage volume: approx. 4 t* Pc.EFA-11000 Storage volume: approx. 6 t* Pc.
* The storage volume is dependent on the filling method.
Electronic fill level indicatorElectronic system which indicates the fill level and remaining volume,warns against accidental drainage and records the quantity of pellets used.The display can be installed in the building.
66766677
EFA-8000 Suitable for underground tank 8000 Pc.EFA-11000 Suitable for underground tank 11000 Pc.
NOTE: Delivery condition for underground tanks: Since the underground tank is delivered via lorry without a superstructure
crane, an unloading aid (fork lift, crane, tractor with front loader, etc.) must be provided! The tank is unloaded from the side of
the lorry. Where possible, the tank can also be delivered by means of an articulated lorry (13.5 m long). The lorry must be able to
access the site. Delivery includes carriage ex works up to the point where the (articulated) lorry can access the site
(not unloaded). Sufficient notice must be given in case of narrow or difficult on-site conditions. If access has been requested
but cannot be granted due to non-compliance with the points mentioned above or the cargo has to be unloaded and reloaded,
this situation and any additional costs incurred will be stated on the invoice.
Vacuum refill and return-air coupling 4” for pellet boxWith fixing bracket incl. Storz A-coupling and sealing cover. NOT extendable!
6675 BAS4” Set
1114.-
292.-
8282.-10,086.-
297.-297.-
312.-
Underground pellet tank (plastic)Consisting of a polyethylene construction, dome shaft, dome cover, servicecover, extraction system with vacuum extraction auger and geared motor, 2 x vacuum refill couplings with Storz A-couplings and caps.8000 l: Ø 2350 mm, height: 2400 mm, weight: 450 kg.11000 l: Ø 2350 mm, height: 3200 mm, weight: 520 kg.IMPORTANT: price ex works - delivery cost on request
NOTE: Approx. 10% surcharge for reinforced design, suitable for setting in
a concrete foundation in areas with a high ground water level.
Not suitable for flood plains!
IMPORTANT: Only
use one extension
frame per box!
NOTE: If the vacuum refill and return-
air couplings have to be extended,
use part no. 6645 or 6646
instead of part no. 6675
Price list 2013
111
17
The way is clear for even more convenient heating!
Careful drainage – Irrespective of the room layout!
Thanks to the flexible arrangement of the suction heads, the storage area can be drained much more evenly thanwith other extraction systems, regardless of whether the storage area is laid out in a rectangular or an angled shape.
Suction head set for pellets
E-mail: [email protected] l www.solarfocus.eu
Automatic suction head set for pellets, 4-fold, can be extended to 6-foldConsisting of an automatically switchable diverter, four suction heads anda suction head module. With 18 x hose clamp, without vacuum hose!The maximum total length in one direction is 15 m and the maximumpermissible difference in height between the furthest suction head and theboiler is 2.5 m. The minimum bend radius for the vacuum and return-air hosesis 30 cm. The suction head module is connected to the boiler control via a buscable 2 x 0.25 mm² (provided by the client).Only in combination with SOLARFOCUS ecomanager-touch.
Manual suction head set for pellets, 4-foldConsisting of a manually switchable diverter and four suction heads. With 16 x hose clamp, without vacuum hose! The maximum total length in onedirection is 15 m and the maximum permissible difference in height betweenthe furthest suction head and the boiler is 2.5 m. The minimum bend radius for the vacuum and return-air hoses is 30 cm.
SOLARFOCUS suction headSuction head for extracting pellets from the storage area. Consisting of onesuction head with 4 x hose clamp, without vacuum hose! With floor fixing materials. The maximum total length of the vacuum hose inone direction is 15 m and the maximum permissible difference in heightbetween the furthest suction head and the boiler is 2.5 m. The minimum bend radius for the vacuum and return-air hoses is 30 cm.
F90 stacking frameIf the thickness of the wall where the automatic diverter for suction heads is tobe mounted is less than 25 cm and the storage area represents a separate firecompartment, the F90 stacking frame must be used to achieve the requiredcoverage of rock wool sheets (rock wool not included).
68180 SU Pc. 90.-
68190 SM Pc. 676.-
68185 SA Pc. 1195.-
68195 AR Pc. 38.-
makes you independent
112
Fire protection sleeve for vacuum and return-air hoseRequired for feeding the hose from the boiler room to adjacent rooms.Ribbed modules with a core of heat-quenching material; incl. fixing materials.
6135613661376138
S-BM-B For concrete walls DM 52 - 64 mm Pc.S-BM-Z For brick walls DM 52 - 64 mm Pc.S-BM-B For concrete ceilings DM 65 - 78 mm Pc.S-BM-Z For brick ceilings DM 65 - 78 mm Pc.
Vacuum and return-air hoseFor transporting the pellets from the room extraction auger to the boiler. Wear-resistant special hose, with copper braid to ensure it is potential-free.Hose inside Ø = 50 mm.Maximum auger length up to 20 m depending on extraction, max. auger height5 m, for suction head maximum auger length 15 m, max. auger height 2.5 m.
6120612161226123
69201
S-SR12 12.5 m rollS-SR20 20 m rollS-SR Max. length per piece = 50 m Per running mS-SR50 50 m rollHose clamp Tensioning range 56 - 59 mm,galvanised steel Per pc.
Support shell made of galvanised sheet steelFor supporting the hose in a horizontal installation.Length = 200 cm.
6125 S-TS Pc.
Fixing clip for vacuum hoseWith hanger bolt and dowel. For hose Ø = 50 mm.
6130 S-BS Pc.
NOTE:
The fire protection sleeve must be fitted as per regulations to both sides of
the wall opening, for concrete ceilings only on the underside of the ceiling.
52.-52.-67.-67.-
89.-146.-
9.10365.-
2.-
13.30
Galvanised extension sleeve for pellet hoseDM 50 mm, incl. 2 hose clamps. Only use for return-air hose!
5.-
Pellet storage area accessories
Price list 2013
68230 VLM Pc. 39.60
113
17
Part no.: 6660
Part no.: 6661
Straight filling and suction pipes, „aeratable“, DM 100 mmConsisting of an aluminium pipe with Storz coupling! Sealing cover is made ofaluminium and can be locked and aerated (by dismounting the aluminium sealdisc prior to installation). Length: 0.5 mm
Extension pipe DM 100 mm For extending the filling and suction pipe with a sleeved aluminium pipe,with seal
6615661666176618
VL Length 500 mm Pc.VL Length 1000 mm Pc.VL Length 1500 mm Pc.VL Length 2000 mm Pc.
Metal door profile set For fitting door protection boards in the fuel storage area.Z profile 40 x 40 x 35 mm, 4 pcs. à 1000 mm.
6662 TPS 1 set
Door protection board Length 100 cm, width approx. 25 cm, thickness 2.2 cm.You will require 9 pieces for a standard door and 5 pieces for an access hatch.
66606661
TSB Door protection board Pc.TSB-S Door protection board with peephole Pc.
Plastic impact protection mat with metal fixing profile For fitting to the ceiling of the fuel storage area opposite the blower pipe.Distance to wall approx. 20 cm. Incl. fixing materials. W/H: 120 cm x 100 cm
6665 PSM Pc.
Fixing clip 100 for pellet extension pipeFor fixing the extension pipes to the wall or ceiling. For pipes Ø 100 mm.
6131 BS100 Pc.
45° filling and suction pipes, „aeratable“, DM 100 mmConsisting of an aluminium pipe with Storz coupling! Sealing cover is made ofaluminium and can be locked and aerated (by dismounting the aluminium sealdisc prior to installation). Length: 0.5 m + 45° elbow.
45° flue gas pipe elbow DM 100 mmFor filling and suction pipes with 45° sleeved aluminium pipe elbow, with seal
6621 RB45 45° elbow Pc.
22.-36.-46.-62.-
28.-
6.-11.-
50.-
5.10
22.-
NOTE: After every
extension tube,
a fixing clip must
be installed.
NOTE: In closed storage areas,
the air vent plate of the sealing cap
has to be removed.
6645 BAR Per pair
6646 BAR 45 Per pair
192.-
300.-
E-mail: [email protected] l www.solarfocus.eu
Pellet storage area accessories
makes you independent
114
1
3
2
4
5
1
3
2
4
5
Pellet storage area set
Heating container
Pellet storage area set Consisting of: filling and suction pipes for pellets (l = 50 cm), Storz coupling A-100 incl. dummy cover. Plastic impact protection mat with metal fixing profileand fixing materials (W/H: 120 x 100 cm).Door profile set made from metal,Z profile (4 x 4 x 3.5 cm, length = 100 cm), 7 x door protection board (length =100 cm, thickness 2.2 cm) and 2 x door protection board with peephole.
Filling and suction pipe, Storz coupling A-100 incl. dummy cover
Door profile set
Door protection boards
Door protection boards with peephole.
Impact protection mat
66666668
PLS With straight filling and suction pipe Pc.PLS-45 With filling and suction pipe bent to 45° Pc.
299.-396.-
F90 heating containerIdeal for larger housing complexes, business establishmentsor community facilities. Fire resistance class F90, reinforced concrete, wall and ceilingthickness = 10 cm, floor thickness = 12 cm. Consisting of: external sprayed rendering and internal paint,floor with smooth form finish, partition wall with access hatch80/80 T30, galvanised and primed. Doors 100/200 T30,ventilation grille with insect protection, roof coating incl. waterdrain pipes and drainage via fascias. Filling and suction pipesfor pellets, Storz coupling incl. dummy cover, impact protectionmat, door profile set with door protection boards. Chimney depending on boiler type.All cut-outs for connections.
Price list 2013
Part no.: 6660
Part no.: 6661
SBEC 12 Approx. L/W/H 4 x 2.98 x 2.73 m Pc.SBEC 15 Approx. L/W/H 5 x 2.98 x 2.73 m Pc.SBEC 18 Approx. L/W/H 6 x 2.98 x 2.73 m Pc.SBEC 21 Approx. L/WH 7 x 2.98 x 2.73 m Pc.SBEC 24 Approx. L/W/H 8 x 2.98 x 2.73 m Pc.
On request
On request
On request
On request
On request
115
18
Product description:The stand-alone variant „ecomanager-touch central control unit“ regulates all solar, DHW and heating system components.
Technical data:- 5.7“ VGA colour touch-screen display ensures simple, logical operation - High-performance microprocessor
Standard: one heating circuit dependent on atmospheric conditions andone DHW tank charging circuit. Complete with flow sensor, outdoor sensorand DHW tank sensor incl. immersion sleeve 1/2“ ET, boiler sensor andreturn sensor.Boiler activation via potential-free relay output.Power modulation via 0 - 10 V output.
Option: heating circuit control can be extended to max. 8 heating circuitsdependent on atmospheric conditions and 4 DHW tank charging circuits
Visualisation and remote maintenance possible via VNC server:- Ethernet interface for remote querying- All system settings can be adjusted via smartphone or touch pad
(for PC and Mac)On-wall display housing dimensions: 220 x 220 x 50 mmConnection cable from display to heating circuit module 2 x 0.5 mm², shielded (TO BE PROVIDED BY THE CLIENT)
Control technology ecomanager-touch
4 5.7” VGA colour touch-screen display
4 High-performance microprocessor
4 Up to 8 heating circuits dependent on
atmospheric conditions
4 Up to 4 DHW tank charging circuits
4 3 controllable solar circuits
4 Also controls the fresh water module
4 buffer tank management
4 Visualisation and remote maintenance possible
via VNC server
ecomanager-touch central control unit
E-mail: [email protected] l www.solarfocus.eu
616206162161622
ecomanager-touch On-wall central control unit Pc.ecomanager-touch In-wall central control unit Pc.In-wall housing for ecomanager-touch
Dimensions (HxWxD): 190 x 172 x 70 mm Pc.
1195.-1195.-
135.-
makes you independent
116
Room temperature controllerThis module allows the set room temperature to be adjusted by +/- 5 °C andalso facilitates frost protection, reduced and continuous heating operation andautomatic mode.Connections: 2 x 0.75 mm2. One piece required per heating circuit! Can only beused in conjunction with SOLARFOCUS ecomanager and ecomanager-touch!
6160 RTR Pc.
6158 S-EMHK+2 Per pc.
6159 ST-GSM Pc.
Device for signalling faults via GSMFaults are notified via SMS or a telephone call. Up to 10 numbers can besaved. Supplied in metal housing IP 30 incl. emergency power battery andpower connection, without SIM card. GSM reception must be available whereit is fitted. Dimensions: W/H/D = 108/165/56 mm
Upgrade package for two heating circuits, 1 DHW charging circuit andcharge control for the buffer. Upgrade package for two mixer-controlled heating circuits, one DHW chargingcircuit and charge control for buffer charging and discharging. Complete withsensor (excl. room thermostat) and installation accessories. Dimensions: W/H/D 80/100/35 mm. Max. of 3 extension sets per boiler.Can only be used in conjunction with SOLARFOCUS ecomanager andecomanager-touch!
65.-
841.-
850.-
Extensions for ecomanager-touch
Upgrade package for a second heating circuitUpgrade package for a second mixer-controlled heating circuit.Complete with sensor (excl. room thermostat) and installation accessories.Can only be used in conjunction with SOLARFOCUS ecomanager andecomanager-touch!
6150 S-EMHK Per pc.
Upgrade package for two additional heating circuitsUpgrade package for 2 mixer-controlled heating circuits.Complete with sensor (excl. room thermostat) and installation accessories.Dimensions: W/H/D 80/100/35 mm. Max. of 3 extension sets per boiler.Can only be used in conjunction with SOLARFOCUS ecomanager andecomanager-touch!
6155 S-EMHK+2 Per pc.
127.-
681.-
Double-circuit temperature difference charge controlExtends the ecomanager and ecomanager-touch heating circuit control by two temperature difference charging circuits. Can be used for heating returnswitchover in the buffer tank, fuel-dependent charging of the buffer tank(therminator), two temperature difference controls that are independent of oneanother. Incl. 4 temperature sensors and 4 immersion sleeves.Only in conjunction with ecomanager and ecomanager-touch
6190 WZR Pc. 295.-
Price list 2013
NOTE:
As standard, the heating circuits are
regulated according to the outside
temperature; for regulation according
to the room temperature,
you will require part no. 6160.
18
117
68408 FK3WA Pc.
External boiler + 3-way valve controlControls the demand to an external boiler and simultaneously connects the flownot to the buffer, but to the heating system directly (by means of the 3-way motorvalve provided by the client). The external boiler is activated when there is anactive heating circuit demand and the therminator II/pellettop is not in operation.Control can only be used with the therminator II/pellettop boiler type! Functional warranty only on the basis of the SOLARFOCUS planning proposal!With silicone sensor for external boiler.
164.-
Electronic heat meter ecomanager
With integrated temperature measurement and electronic flow measurement. Measurement of the medium temperature from -40 to +100 °C.Can only be used in conjunction with boiler control ecomanager andecomanager-touch for heat metering with the solar stratified charging module!
119344119345
WMZECO 2 - 32 l/min up to 40 m² 3/4“ ET Per pc.WMZECO 4 - 50 l/min up to 150 m2 1“ ET Per pc.
198.-214.-
Available from
July 2013
E-mail: [email protected] l www.solarfocus.eu
Solar control Temperature difference control, temperature display on the touch-screen,collector temperature limitation, speed control, starting function, operationalstatus display and plausibility check for the measured temperatures.With collector and Buffer tank sensors incl. immersion sleeve 1/2”.Also suitable for high-efficiency pumps. Can only be used in conjunctionwith SOLARFOCUS ecomanager and ecomanager-touch!
6154 S-WMZ Nominal flow rate 1.5 m3/h Pc.
Heat meter for solar thermal systemNominal flow rate: 0.12 to 1.5 m3/h, Dp = 0.25 bar, calibration error: 3%. Continuous temperature resistance: 90 °C, short-time: 105 °C; measurement tolerance: max. 10%. Anti-freeze compensation! Incl. 2 contact sensors and flow volume sensor 3/4“. Can only be used inconjunction with SOLARFOCUS ecomanager and ecomanager-touch!
6156 WZR Pc.
DHW circulation controlFor use with a DHW tank. The circulation pump can be controlled based ontemperature and via five adjustable time windows.Upgrade package contains a Buffer tank sensor.
171.-
100.-
touch remote control moduleThe system’s actual and set values are represented digitally on the 7‘‘ colourdisplay. Operation is via the touch-screen. A power supply unit is integrated in thehousing for the purpose of supplying the voltage. The remote control modulecommunicates with the boiler operating unit over Ethernet. The required CAT5eEthernet cable with RJ45 connector and a corresponding Ethernet switch mustbe installed on site. Please take note of the safety instructions in the manual too!Dimensions: LxHxW: 238 x 188 x 40 mmCan only be used with Solarfocus ecomanager-touch!
616806169061700
S-RE-S-01 For one solar circuit Pc.S-RE-S-02 For two solar circuits Pc.S-RE-S-03 For three solar circuits Pc.
241.-277.-525.-
61670 S-EMPE Pc. 720.-
makes you independent
IMPORTANT:
Part. no. 61700
not to be used with ecomanager!
118
Cascading solutions up to 420 kW
Cascading
With their capacity for cascade control up to 420 kW, biomass boilers from SOLARFOCUS are ideal for multi-
storey residential buildings, as well as for commercial premises.
Cascading applications
Statistics show that maximum boiler output is only required for around 10% of the year. The boiler runs at partial
load or in the low-performance range (or in cycle mode) for the remaining 90% of the time; so it is not utilised in
the optimum manner. Cascading solutions are an effective way to combat such inefficiencies.
THE ADVANTAGES FOR YOU
l Maximum operational reliability: if one boiler
fails, the next one takes over heat production.
This combination also allows maintenance work to
be carried out easily.
l Versatile applications: spatial versatility,
including for varying capacity utilisation.
l The flexible combination of performance classes
enables customised adaptation.
l In the summer or during periods of transition when
only part of the total output is needed, for example,
one single 70 kW pellettop can handle the full energy
requirement. The other boilers remain cold. This
enhanced efficiency compared to large boilers helps
you to save fuel!
l Longer service life: less material wear than with
a large boiler.
Cascade control unit ecomanager-touchThe cascade control unit regulates the boiler switching sequence depending onthe temperature and running time. A maximum of six boilers can be connectedto one another in a cascade system. The individual boilers are connected to oneanother via the Ethernet interface. Ethernet cables are used as connectingcables in accordance with CAT5e (provided by the client). With more than threeboilers in the cascade, an Ethernet switch (provided by the client) must be used.Please take note of the safety instructions in the manual too! The cascade control unit is activated during commissioning by an authorisedService Department engineer.Functional warranty only on the basis of the SOLARFOCUS planning proposal!Can only be used in combination with SOLARFOCUS ecomanager-touch (NOT with ecomanager)!
Commissioning of a cascade systemCertification and adjustment work for every additional boiler in the cascade.Is required in addition to commissioning (e.g. part no. 6086, 6087) for eachfurther boiler!
68425 KS-IN Commissioning of cascade Net price/boiler 174.-
68430 KKM Cascade control unit Pc. 431.-
For
therminator II touch
Available from
May 2013
Price list 2013
19
119
Services/Warranty pass
CommissioningCommissioning of the system once it is ready to run. No liability is accepted orwarranty provided in the event of improper commissioning.
60956096
„Power package“ boiler service Annual net price„Basic package“ boiler service Annual net price
System plans, submission plans Net priceBuilding negotiations Net price
63406341
ServicesWe will plan a system tailored to your needs, produce the submission plansfor the biomass heating system and support you during building negotiations(on request).
243.-174.-
80308032
Commissioning of a solar thermal system up to 50 m² Net priceCommissioning of a solar thermal system up to 200 m² Net price
195.-420.-
223.-Based on time spent
Commissioning of the touch central control unit Net price6090 297.-
60826086
60876088
S-IN-ST Log boiler Net price S-IN-A Log/pellet or
wood chip systems Net priceS-IN-PT pellettop Net priceS-IN-PP octoplus Net price
Maintenance of a solar thermal systemIncludes: inspection of the system parameters and the heat-carrying medium,optimisation of the solar control, compilation of a maintenance report.Please note that all appointments are to be agreed in writing with our ServiceDepartment. Additional services and materials are charged on the basis ofcosts incurred.
WS Up to 50 m2 Net priceWS Up to 200 m2 Net priceSTA Outward and return journeys Net price
803480368039
ST Solar technician Per/hSTA Outward and return journeys Net price
80388039
Solar techniciansOur solar technicians are ready to support you on site if you so require.Materials are charged on the basis of costs incurred.
297.-
458.-297.-373.-
Commissioning of the ecomanager-touch central control unitWhen the system is ready to run (electrics and hydraulics fully complete)!
Commissioning of a solar thermal systemIncludes: inspection and setting of the system parameters, checking of thehydraulic pipework (against the diagram), setting of the solar control,compilation of an acceptance report, instruction of the plant operator.Prerequisites: the system is ready to run (solar, heating, sanitary andelectrical systems). Additional services and materials are charged on thebasis of costs incurred.
164.- 390.-
Based on costs incurred
72.- Based on costs
incurred
NOTE:
The maintenance of
large-scale solar thermal systems
over 200 m2 is charged for
on the basis of costs incurred
E-mail: [email protected] l www.solarfocus.eu
Warranty passA maintenance contract is a prerequisite for obtaining an extendedmanufacturer’s warranty. Maintenance according to checklist.
makes you independent
NOTE:
Commissioning does not include the
setting up of remote access to the
VNC server or of the e-mail function.
Required modifications/installation
work and materials are charged on
the basis of costs incurred.
120 Price list 2013
Production
SOLARFOCUS bringstogether things that
belong together: innovative technology andstate-of-the-art production!
THINKING OUTSIDE THE BOX, THINKING ABOUT THE ENVIRONMENT and THINKING AHEAD
are at the forefront of every product we develop. The Research, Development, Production, Quality Assurance and
Administration departments are found at the St. Ulrich site, where all the workers really do care about the
environment and the use of renewable energy.
121E-mail: [email protected] l www.solarfocus.eu
makes you independent
Training etc.
If you want to take part in training at SOLARFOCUS,
simply get in touch with your contact! You will find the
relevant contact details, along with all dates of
upcoming training sessions, on our homepage at
www.SOLARFOCUS.eu:
l Sales training
l Intensive product training
l Intensive solar training
l Intensive biomass training
The customer always comes first.
Whoever makes this claim must also prove it in practice. SOLARFOCUS does this every single day:
not only with top-class products, but with advice, assistance, training and much, much more.
We pass on our comprehensive expertise directly to our partners, so that they can offer their
customers professional advice in turn. Furthermore, with our comprehensive network of highly
specialised service technicians, we are always right there wherever our help is needed. Because,
for SOLARFOCUS, the relationship with our customers does not end when they make a purchase,
it continues long into the future in the form of after-sales support. Safety, reliability and expertise are
what matter here.
Knowledge with a future
Service that is as reliable as the sunrise
122 Price list 2013
123
Important dates 2013:
Trade shows 2013:
Energiesparmesse Wels
27/02 - 03/03/2013
ISH Frankfurt12/03 - 16/03/2013
The dates of other trade shows can be found at
www.solarfocus.eu
Open day: 12 and 13 April 2013 (at the factory)
Day of Sun: 3 and 4 May 2013 (across Europe)
Boiler exhibition days: 30 and 31 August 2013 (at the factory)
E-mail: [email protected] l www.solarfocus.eu
makes you independent
Terms and conditions
Subject to technical modifications; typographical and printing errors excepted! The images used are symbolic photos. All prices are stated in euros and excluding VAT.
Subject to price changes. Delivery is free to the buyer’s address, or warehouse in the case of whole-salers, for orders with a net total of €3000.- or above. Deviating terms and conditions (of purchase)
are not recognised. Payment terms: 8 days with 2% discount, 20 days net
SOLARFOCUS GmbHA-4451 St. Ulrich bei Steyr, Werkstraße 1, Austria
Tel.: 0043 7252 500 02 - 0 – Fax: 0043 7252 500 02 - 10E-mail: [email protected] – www.solarfocus.eu
1. The quotation
Our quotations are non-binding. We reserve the right to makemodifications to the equipment as a result of further technicaldevelopments. All technical documents remain the intellectualproperty of the contractor.
2. Prices
If material costs rise between the time when the contract is concludedand when the agreed work is carried out due to recommendationsmade by the Paritätische Kommission (the Austrian ParityCommission), changes in global market prices for raw materials,changes in acquisition prices or circumstances out of the contractor’scontrol which lead to additional work and costs, the prices underconsideration shall rise accordingly, unless the period of time betweenthe contract being awarded and the agreed work being carried out isless than two months. Prices are exclusive of VAT, ex warehouse or exworks and do not include packaging, shipping or distribution costs. Weshall charge for packaging costs at cost price. Prices with no quantityspecified are unit prices.
3. Performance periods and deadlines
If the start date for the agreed work is delayed or the work itself isinterrupted, the agreed performance periods shall be extended andthe agreed completion deadlines postponed accordingly. If the delaysor interruptions have been caused by circumstances beyond thecontractor’s control, the contractor shall not bear any fault, thecustomer shall bear all additional costs incurred due to the delays orinterruptions and the contractor shall be permitted to declare hisservices and work payable by means of partial billing.
4. Payment
Reminder and bill of exchange charges, as well as the costs of out-of-court enforcement via a solicitor, shall be borne by the customer.If the customer defaults on a payment, the contractor shall beauthorised to calculate default interest of at least 12% annually;claims for compensation of higher interest rates shall not beconsidered. The contractor is authorised to transfer the debt claim toa debt collection agency.
5. Reservation of title
All goods delivered, installed or otherwise transferred shall remainthe property of the contractor until they have been paid for in full.If the customer defaults on payment, the contractor shall beauthorised to take back any goods acquired under reservation of title;this does not equate to a withdrawal from the contract. The customeris therefore obliged, in the case of a seizure or other type of availmentagainst the delivered or installed goods, to assert the right ofownership of SOLARFOCUS GmbH and to notify it of the situationimmediately. In the case of resale, the customer shall pledge thepurchase price claim against his customer in advance in order tosafeguard the claim from this contract and is obliged to record thislien in his account books.
6. Complaints
Identifiable defects shall be notified in writing within one week ofreceipt of the goods, hidden defects within one week of discovery ofthe defect.
7. Transport and insurance
When the goods you have ordered are handed over to the carrier(post office, federal railway or forwarding agent), we shall be deemedto have completed our contractual duties and the risk shall transfer toyou. Once the delivery or service has been accepted, all risks and thecosts of storage shall be borne by the customer. Also in the case ofpartial deliveries, the entire risk for said partial delivery shall transferto the customer.
8. Warranties
Provided that the customer does not claim for cancellation, thewarranty shall take the form of a free of charge rectification of theproven defects, within the warranty period. If the defects cannotbe rectified or are associated with unreasonably high costs,an appropriate replacement shall be provided.
9. Compensation for damages
The contractor shall only be liable for the damages which he hascaused to items belonging to the customer that he has accepted forprocessing during the course of performing the agreed work. All otherclaims by the customer, particularly those seeking compensation forany further damage, including consequential harm caused bya defect, shall be excluded, unless the contractor is guilty of grossnegligence or intent.
10. Product liability
The equipment delivered and services rendered shall offer only thelevel of reliability that can be expected based on certificationregulations, operating and instruction manuals, regulations providedby the supplier, etc. and other stated instructions. In the case ofstatutory product liability, the liability for material damage - also thatof the upstream supplier or sub-contractor - shall be limited todamages sustained by the consumer. This limitation of liability shallbe transferred in full to all consumers, with the obligation to transferit further to the customer’s clients and their clients in turn.
11. Place of fulfilment
Provided that nothing is agreed to the contrary, the place of fulfilmentshall be the contractor’s headquarters.
12. Place of jurisdiction
The place of jurisdiction for all disputes is Steyr. All our disputes shallbe subject exclusively to Austrian law, with the exception of IPR andthe UN CISG.
13. Warranty claims for compensation
Warranty claims for compensation in the case of deliveries made viaspecialist dealers (installation engineers, wholesalers, etc.) shall belimited without exception to the free of charge delivery of spare partsexcluding installation costs.
14. Return of goods
Goods can only be returned with a collection order! Please notify usif goods are to be returned, stating the delivery note or invoicenumber. The collection order will then be mailed to the customer.The goods can only be returned to us with this collection order, aswithout it, allocation of the goods in our warehouse is not possible.Any defects ascertained on inspection will be invoiced!Return costs amounting to 20% of the net value of the goods willbe charged.