(price list) hss drills 052019 - gokul traders

HSS DrillsPrice List w.e.f. 2nd May, 2019

INDEX

www.jksuperdrive.com 02

HEAVY MACHINE TOOL - CUTTING DEVICE

1. These are the current prices and supersede all previous price-lists.

6. Please refer to us for Centre Drills with special dimensions.

8. All legal proceedings are subject to Mumbai Jurisdiction.

5. Dealers are free to charge lower than the Maximum Recommended Retail Price.

3. Prices are F.O.R. Destination4. Prices are subject to revision without prior notice and all pending orders, if any, will be invoiced at

2. Govt. levies, if any, will be charged extra as applicable

the rates ruling on the date of delivery.

7. For HSS Square Tool Bits, orders to be in multiple of 10 numbers upto 1/2" Square.

HSS Straight Shank Long Series Drills 10-12

HSS Straight Shank Jobber Drills ground Flute 03-06To IS: 5101 / DIN: 338 / BS: 328 / I.S.O.

HSS Straight Shank Stub Series Drills 07-09To IS: 5100 / DIN: 1897 / BS: 328 / I.S.O.

To IS: 5102 / DIN: 340 / BS: 328 / I.S.O.

To IS: 7823 / DIN: 340 / BS: 328 / I.S.O.HSS Straight Shank Extra Long Series Drills 13

HSS Taper Shank Twist Drills 14-17To IS: 5103 / DIN: 345 / BS: 328 / I.S.O.

HSS Taper Shank Twist Drills (Long Series) 18-20

HSS Taper Shank Twist Drills (Extra Long Series) 21-24

HSS Jobber Blanks 29

HSS Square Tool Bits 26

Standard Masonry Drills 27

To IS: 8305 – 1976

Super Granit Masonry Drills 28

Notes 30

HSS Centre Drills 25

Page no.

www.jksuperdrive.com03

HSS Straight Shank Jobber Drills Ground Flute


To IS: 5101 / DIN: 338 / BS: 328 / I.S.O.

MAXIMUM RETAIL PRICE LISTPRICES IN RUPEES PER 10 NOS.

w.e.f.nd

2 May, 2019

840840840840770770710740670670440440440440440440440440440440440440440470470470470470470470470470470470480470470470

470480480480480480480480480480480480480480500500480480480500500500500500500620620620680680680680680680680860920920

HSS Straight Shank Jobber Drills Ground FluteTo IS: 5101 / DIN: 338 / BS: 328 / I.S.O.



w.e.f.nd2 May, 2019

920920920920920900900900110011001100110011001100112011201120136013601360136013601360140014601460146014601470147014701470147014701470168016801680

16801680168016801680187018701870187018701870187018702070207020702070210021002100210026302630263026302630263026302860286028602860286030903090309030903090


HSS Straight Shank Jobber Drills Ground Flute


To IS: 5101 / DIN: 338 / BS: 328 / I.S.O.


w.e.f.nd2 May, 2019

30903330333034603460346034603660366036603660366043104310451045104510451045104510475047504750475047504950495049504950495049504950495056305630563056305630

61706170617061706170617064806480648067906790679067906790718071807180718080208020802080208020846084608460846084609010901090109010901095909590959095909830


HSS Straight Shank Jobber Drills Ground FluteTo IS: 5101 / DIN: 338 / BS: 328 / I.S.O.



w.e.f.nd2 May, 2019

10110101101011012540125401254012540133501335013350133501335014760147601476014760152001520015200166901669016690166901771017710186801868018680

Jobber Drill Set 3/ 32" to 1/ 4" (7 pc) : - 798

Jobber Drill Set 1.00 to 13.00 mm (25 pc) : - 8750Jobber Drill Set 1/ 16" to 1/ 2" (29 pc) : - 11310

Jobber Drill Set 1/16" to 1/4" (13 pc) : - 1365

Jobber Drill Set 1/16" to 1/ 2" (29 pc) : - 11977Jobber Drill Set 2.00 to 8.00 mm (13 pc) : - 2041

Jobber Drill Set 1/ 8" to 1/ 4" (4 pc) : - 496

Special notes:

1. Intermediate, unlisted sizes, price of the next larger listed

4. All sizes can be ordered in multiple of 10 only.

size will be charged.

3. Jobber Series Drills with Tenon can be supplied at 20%

2. Quick Spiral or Slow Spiral drills upto sizes 3.17 mm and sizes over 3.17 mm will be charged 50% and 25% Extra respectively.

extra for sizes upto 6.50 mm 10% extra for sizes over 6.50 mm.


HSS Straight Shank Stub Series Drills


To IS: 5100 / DIN: 1897 / BS: 328 / I.S.O.


w.e.f.nd2 May, 2019

440440440440450450450430430430430430500500580630630630830830830940940115011501150125012501250138013801540154015701760176021302130

21302350235023502420265027002980298029803830383039803980398042004200420044104670538053805380573057306490649064906800720077007700770076407640764083308330


HSS Straight Shank Stub Series DrillsTo IS: 5100 / DIN: 1897 / BS: 328 / I.S.O.



w.e.f.nd2 May, 2019


8570857085701053011260112601126011700117001170012730138301383013830138301500015000150001500015060150601506015390153901566015660156701591015910161401614016140164401644016440168001680016800

1680017020174201742017420180901809018290182901829019180191801918020390203902068020680206802184021840218402184024140241402414024140265002650026650266503007030070307403074031050327903279034660

HSS Straight Shank Stub Series Drills


To IS: 5100 / DIN: 1897 / BS: 328 / I.S.O.


w.e.f.nd2 May, 2019

worth Rs. 10,000/- per size.

1. Intermediate or non-listed sizes, price of the next larger

and sizes over 3.17 mm (1/8”) will be charged 50% and

Special notes:

2. Quick Spiral or Slow Spiral drills upto sizes 3.17 mm (1/8”)

25% Extra respectively, subject to minimum ordering value

listed size will be charged.

3. All sizes upto dia 13.00mm to be can be ordered in multiple of 10 only.


3466034960349603671040350403504088040880460104601046010466804668047950491304913049130491305178051780568305683056830624406337063370633706337063370680806911069110691106911077150771507854078540

HSS Straight Shank Long Series DrillsTo IS: 5102 / DIN: 340 / BS: 328 / I.S.O.


MAXIMUM RETAIL PRICE LISTPRICES IN RUPEES PER 1 NO.

w.e.f.nd2 May, 2019

303303303303303303303303303303303303303303303303380380380380380380380380380380380380380380346380380374412412412412

412412412412412412412412412412412474474474474474552552552552616616616616616616679694679632883883105710571057105710571057


HSS Straight Shank Long Series Drills


To IS: 5102 / DIN: 340 / BS: 328 / I.S.O.

10571057105710571057105710571057105710571087108710871087108710871087108711031152115211521387121313701387121312131401140112601401126015121716171615911591

18431639184318431639168618731873168616862565233025972597237525972818281825972597259727222990272227222722281828182818281828662866319329262926299029903240



w.e.f.nd2 May, 2019

HSS Straight Shank Long Series DrillsTo IS: 5102 / DIN: 340 / BS: 328 / I.S.O.


59785978605860587455745576117611761182108210838283828382855685568650865086508650945295779577957795779656984698469846984699709970101741017410174108191081911008110081100812252122521269012690

Special notes:1. Intermediate, unlisted sizes, price of the next larger listed size will be charged.2. Quick Spiral or Slow Spiral drills upto sizes 3.17 mm and sizes over 3.17 mm will be charged 70% and 35% Extra respectively.

5% extra for sizes over 6.50 mm.4. The minimum ordering value per size should be worth Rs. 10,000/-

3. Long Series Drills with Tenon can be supplied at 10% extra for sizes upto 6.50 mm



w.e.f.nd2 May, 2019

2990299031933193352632403240324033833711344734473447363539803635363536353871410638713871387139803980435941064106435943594657435943594704470450334814481448144892575653495349534955686086556855685568

HSS Straight Shank Extra Long Series Drills


To IS: 7823 / DIN: 340 / BS: 328 / I.S.O.

900835

573

819

558558558558558558526526526

705

1015

7376887057057057057057057057051015

999999

950

1129

1373137313731373

1422143914391521

1570

868

81981981981981985312768538538531211

12111211

114511451196112911291145117811781245

1276

1733

1358

15701570158615701570161816521652175017501781223922392256238623862631263125982598258326792679273029562956

1978

184818482141214121412141219121912338

2401

2989

2207220723702386238623862436243625982598266333313331336537413560

393537243691369138393839375740834083404940494313432843284587

279427943138313831383138315231523479347934473642364238874295429544764476452545254525450846224719496549655046504654215421553555355535

307430743451345134513451346834683828382837924007400742764725472549234923497849784978496050855191546254625552555259635963609060906090

394939494029411041104136413641365283528353365604560461636163617061706202638763876536668966896690669067496749674970837083

43624313431344254508450845254525

5797579758786206620668576857685868586904717571757379758275827579757977067739773981978197

483548354931502950295062506250626465646565316857685775437543755175517588781778177999818681868191819182608260826086698669

4. Minimum ordering value per size should be worth Rs. 15,000/- gross.

Special notes:

1. Intermediate, unlisted sizes (in Dia and Length) price of next larger listed size will be charged.

5. Other details will be mentioned as per IS:7823.

2. For sizes below dia 9.00 mm max. Flute length which can be provided is 350mm.3. For specials and unlisted sizes please refer to us.



w.e.f.nd2 May, 2019

HSS Taper Shank Twist DrillsTo IS: 5103 / DIN: 345 / BS: 328 / I.S.O.


454454469454469469454454611611611611611611611611611611611611611703688703703703744744744744731731731731843889825

8439358919359358918911000105994110251059129413461249124913461307130713071307144613351335133513351335133518091885188518852026202621052105-2205



w.e.f.nd2 May, 2019

22052304230423042304243624692469246924692375248524852485254125412541254125412541259026882720294029402940294029402920292029202920306830683068306830683237

33473347334733473480348036273627362736773677374337433743401340134154415441544370-39254963496349634963509349054905519149055422542254885488626262626225

HSS Taper Shank Twist Drills


To IS: 5103 / DIN: 345 / BS: 328 / I.S.O.



w.e.f.nd2 May, 2019

6225622562616985668266826972687268726969696969696969754875647564756475648175792679267926792679567956819281928817914191419281928192811034210342107911079111630

-11818118181181811818121001210012100126241286112861132821395114091139511395114793147931479315011153211532115321153211569615696167231796017960179601750117501185431854318543185431901119338

HSS Taper Shank Twist DrillsTo IS: 5103 / DIN: 345 / BS: 328 / I.S.O.




w.e.f.nd2 May, 2019

HSS Taper Shank Twist Drills


To IS: 5103 / DIN: 345 / BS: 328 / I.S.O.

1933820102201022010220102208952089521301208952142521425216902220222202222022220222983229832298322983235252352523525245842458424584245842583025830258302583026376263762637628758287582875828958

28958289582895829271292712927129505308283082830828-422734227342273422734227359235544765447654476544765447657214572145721457214572145962759627596275962759627650766507665076650766507666322663226632266322

Special notes:

Extra will be charged.

2. Quick Spiral or Slow Spiral drills will be charged 25% Extra.3. Over size shank drills to IS:5104 in the following range 10%

size will be charged.1. Intermediate, unlisted sizes, price of the next larger listed



w.e.f.nd2 May, 2019

HSS Taper Shank Twist Drills (Long Series)To IS: 8305 - 1976


1444146114761492149214921492149219561956195619731987195621652246195620852197218121652213216519872228243722132453269325012661288627422613288627562645

26932756275632522853325228532853328537343734373437343751376637663846394340704213421342134213-53055624562455105510562455435575557555755575571857375737



w.e.f.nd2 May, 2019

HSS Taper Shank Twist Drills (Long Series)


To IS: 8305 - 1976

59276120612061206120617062176329643965366665679167916791679168406871687170497242724272427242691966176665671267126856700270027737848986178728872888278906

93059707974098349929992910666-113881153311692117561193212093122051231812318125881285912859131181262212125121251225312686131331313315888161581641716417164631646317233180011816118161



w.e.f.nd2 May, 2019

HSS Taper Shank Twist Drills (Long Series)To IS: 8305 - 1976


1843318721190261902619058190901909019490192491900819008193141913918961189611979419954-2154024405246932499925431258462653526088256402575025880274332818628938295312990030267312443221832075

325713306934047350233502335470359203712038321383213907439827398274034040851418104278842788435424429444294442944533646665479934799351197537745377453774548955768060467606916091460914608196073960739

1. Intermediate, unlisted sizes, price of the next larger listed size will be charged.2. Minimum ordering value per size should be worth Rs. 10,000/- gross.

Special notes:



w.e.f.nd2 May, 2019

HSS Taper Shank Twist Drills (Extra Long Series)


2048204819802362226221812181244624462347258024802480254526802680276127123277326033763376

2430251224302645254526952695274627462629289527782778286030103010301030443674367437923792367436743674

269527942712294628302995299530443044292932283095309531783343334333433393409240744207420740924092409248425205520558375837583757885921595463526352

296230792978355934263309330936943694354238593710371038084025402540254074450744924641464149554955495562546735673564196419641963356519651968016801

330934943376397638253674367441094109395943924226422643414557455745574623490648915056505655215521552168347350735070007000700069187117711774177417

34943376397638253674367441094109395943924226422643414557455745574623490648915056505655215521552168347350735070007000700069187117711774177417

3976415840254308414244414441

4955523852385022502251555438543854385506643459706170617066526652665273997964796483478347834782318480848088298829

4573

5936643464196633663364537167716779648579857989958995899588809129912995109510

6934766676497897789784468446844696101032410109105088995105081035910674106741112311123



w.e.f.nd2 May, 2019



761676167865786579647964818287968730909590959411959510243102431044211406115221152211721

76167616786578657964796481828796873090959095941195951024310243104421140611522115221172113266

9080908093789378947894789760957894629859985910208103911109011090113221235312485124851270314281142811546115629167421739017390174411906918804188041968419766201812018120415

9776977610093100931020810208105081025810174106091060910991111901195411954121861330113434134341366715311165581655816742179391863618636186862043120148201482109621179216122161221878

1142211422117871178711937119371228612104119861250312503129531318412802128021305214248143971439714647



w.e.f.nd2 May, 2019




739981828147843184317858899589959310110241077411206112061120611057113711137111854118541218612186125861258612734127341310112902128021334913349137981406613649136491393215195153611536115629163271767217672

13398133981339813218135991359914165141651458114581150451504515210152101566014963148311546115461160101630915959159591627617772179391793918686190852064720647

14182

141821418213998143971439715012154291542915429159271592716110161101657615845156931637716377169571725716891168911724118819190031900319783202002186121861

177391773917506180041800418769193021930219302199161991620148201482073220200200332088120881216122201119468194681985021661218782187823191232572518625186

186861868618420189531895319766197662031620316209652096521214212142182921266210812197821978227592317520482204822088122808230262302624422244902650126501


w.e.f.nd2 May, 2019




178561913519868198681993221794214962149622493225922305823058233242332424022246042460425552282282822828877302063020631270312703426235028

208812033321114211142117924321239722397225104252032573425734263332633327115277622776228842299892998930688321023210233215332153627337205

221092152922344223442242725734253852538526582266812724727247278792787928708294082940830540317683176832500339783397835176351763841739399

254522500225951259512603228460280632806329392295073012230122294252942530323310373103732234356243562438867406434064342075420754325544352

2679926317273162731627414299582954229542309393105331702317023098730987319033266835176339293811937504409124104442789443034259145532466974867348673505695299654859561535615357902579026081066777667776727567075

39416403634036341925393653936542955449324493246514465145078752099


w.e.f.nd2 May, 2019

3. Minimum ordering value per size should be worth Rs. 15,000 /- gross.

5. Other details will be maintained as per IS:7822

2. All sizes (in Dia and Length ) should be ordered in multiples of 5 upto dia 25.40 mm.

Special notes:

4. For specials and unlisted sizes please refer to us.

1. Intermediate, unlisted sizes (in Dia and Length) price of next larger listed size will be charged.


HSS Centre Drills

258

258

258

258

288

423

528

873

258

258

288

448

564

954


512

733

924

1224

1457


w.e.f.nd2 May, 2019

133

168

262

145

180

252

159

218

358

206

239

388

527

302

396

616

800

630

967

1231

842

1329

1772

2218

3017

211

314

574

274

366

600

353

497

781

418

547

873

1236

652

873

1341

1873

1432

2160

2952

2004

2992

4006

4968

6619

262

392

835

353

470

781

457

640

1016

547

730

1159

1667

886

1159

1834

2563

1965

2875

4032

2705

3967

5423

6644

8868

274

405

846

366

483

796

470

652

1029

561

742

1172

1679

912

1186

1862

2589

1991

2913

4083

2732

4006

5489

6723

8959

HSS Square Tool Bits




w.e.f.nd2 May, 2019

Standard Masonry Drills



81

88

95

115

128

113

219

197

252

226

316

282

282


w.e.f.nd2 May, 2019

135

151

162

189

216

189

251

328

425

376

527

467

467

Super Granite Masonry Drills




w.e.f.nd2 May, 2019

790

690

660

660

450

470

490

570

580

720

820

1160

1190

1290

1430

1580

1980

2300

2550

2630

2890

3470

3600

3800

4270

4910

5200

5490

6140

6460

6920

7280

7680

HSS Jobber Blanks



w.e.f.nd2 May, 2019



Useful Tips for DrillingHEAVY MACHINE TOOL - CUTTING DEVICE

Use the shortest drill possible for the

specific applications as Longer drills are :

4. Reduced drill life

5. Increased cost per hole

1. Helps break up chips

3. Long, stringy chips

1. More costly

1. Premature outer corner drill wear

2. Material work hardening

Optimising feed rate:

2. Reduces premature outer corner drill

2. Break easily

3. Drill bell mouthed holes

Avoid the tendency to over speed and

under feed as Excessive speed causes:

4. Extends drill life

wear

When drilling harder materials (i.e. above

HRC 35) :

materials.

3. Reduces material work hardening

5. Reduces cost per hole

Use split point drills for drilling alloy

materials as it benefits:

1. Start at the point of contact (self-

centering)

2. Drill with less torque and thrust

3. Break up chips

A hole of three drill diameters or deeper

should be considered a deep hole.

Therefore, you should peck drill just

enough to prevent chips from packing in

the flutes, because chip clogging is the

major cause of drill breakage.

1. Reduce speeds and feeds to prevent

points from burning and drilling

breakage.

2. Use cobalt drills as their higher

hardness and heavy-duty construction

are designed for drilling harder-

Use steam tempered. The black oxide

surface laser holds the coolants and

lubricates to the surface of the drill

retarding material build-up. This treatment

also improves toughness.

You should decrease speeds and feeds as

follows:

Chuck drill on shank area only, not in the

flute area

Keep drills sharp! Sharp drills perform

better and last longer. Sharp drills also

increase productivity and have a reduced

tendency to break.

Use coolant whenever possible, this will

keep the drill cooler. Chip welding and

breakage are also reduced. Coolant helps

the drill to last and will give the drill a

better chance of operating without failing.

Chips should be short and broken up.

Speed and feed Reduction(Based upon hole depth)

Holes Depth

To Diameter Ratio

(times drill diameter)

Speed

Reduction

Feed

Reduction

3

4

5

6

10%

20%

30%

35-40%

10%

10%

20%

20%

Our Range

Hand Tools

Power Tool AccessoriesPower Tools

HSS Drills

Contributing to industrial growth for the last 68 years

HSS Taps

Steel Files

Regd. Off.: New Hind House, N.M. Marg, Ballard Estate

Sales Off.: P.O. Jekegram, Pokhran Road No. 1Thane 400 606. Maharashtra, India.

Tel: +91 22 61527000 | Fax: +91 22 61528819/20

Mumbai 400 001. Maharashtra, India.

Email: [email protected] | Web: www.jksuperdrive.com

Authorised Dealer

042019

(price list) hss drills 052019 - gokul traders

Documents