price list - sable engineeringsable.net.au/.../2013/05/downee-catalogue-july2011.pdf · price list...
TRANSCRIPT
T R A D E PRICE LIST
excluding GST
®
Downee®
A Division ofRMD Industries Pty LtdABN 31 004 313 937
downee.com.au 3
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Effective July 2011
Table of contentsFence fittings 5
Chain mesh 5Temporary fence 8Tubular 9
Gate fittings 12Cantilever 12Sliding gate 13Swinging gate 15Gate latches 19Sliding gate kits 21
Automation 21Sliding gates 21Swing gate 22Boom gates 23Accessories 24Racks for sliding gates 25
Decorative fittings 26Spears - aluminium 26 Picket tops - aluminium 27Post caps - aluminium 28Lattice - aluminium 29
Industrial sliding door components 30
Industrial shutter door components 32
Rural 33Timber Post Fittings 33Weld on fittings 34Catches and latches 34Stockyard components 35Farmgate Packs 36
Building hardware 37
Fasteners & paints 38
Shading systems 39
Safety gate 40Latches 40Hinges 40
®
Provide excellence in customer service through the following core behaviours:
1. Listen to our customers to fully understand their needs and business objectives.
2. Deliver the right solutions on time. Quality products at fair and competitive prices, supported with sound technical advice.
3. Prosper to enable investment in product development and to provide unique solutions for tomorrow.
VISIONDownee aims to be the preferred supplier of fencing and hardware components to trade customers throughout Australia and New Zealand. Key elements to our success are market knowledge and understanding, product innovation and motorised integration.
PRINCIPAL VALUES
Since 1953 Downee has led the development and innovation of gate and fence hardware, supplying the trade and retail industries with quality products that are built to last.
Today Downee, a subsidiary of RMD Industries Pty Ltd, has grown to be one of the largest, most trusted suppliers of gate and fencing products & accessories in Australia and New Zealand.
100% Australian owned and operated, with offices and warehouses in Sydney, Brisbane, Perth, Adelaide and Auckland, Downee’s headquarters and National Distribution Centre is based in Melbourne.
Downee components will add quality to your workmanship and will help you succeed in the marketplace.
ABOUT DOWNEE
Effective July 2011
Downee®
A Division ofRMD Industries Pty Ltd
ABN 31 004 313 937 downee.com.au4
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICEALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
DISCOUNT STRUCTUREBRANCHES
Head Office 6-10 Market Road, Sunshine VIC 3020T: 03 9364 8288 F: 03 9311 2030Postal address:PO Box 605, Sunshine VIC 3020E: [email protected]
VICTORIA SALES12 Second Avenue, Sunshine VIC 3020T: 03 9300 5160 F: 03 9311 2030E: [email protected]
NEW SOUTH WALES SALES2 Ross Place, Wetherill Park NSW 2146T: 02 8785 5800 F: 02 9831 7944E: [email protected]
QUEENSLAND SALES74 Achievement Crescent, Acacia Ridge QLD 4110T: 07 3373 8511 F: 07 3373 8799E: [email protected]
SOUTH AUSTRALIA & NORTHERN TERRITORY SALES505 Cross Keys Road, Cavan SA 5094T: 08 8349 7339 F: 08 8349 7449E: [email protected]
WESTERN AUSTRALIA SALES45 Millrose Drive, Malage WA 6090T: 08 9209 3700 F: 08 9209 3693E: [email protected]
FREIGHT TERMS:Minimum order values apply for free and are determined by region. Long product is also subject to addictional freight charges.
EFT PAYMENT DETAILS:ACCOUNT NAME: RMD INDUSTRIES PTY LTDBSB: 083-355 ACCOUNT NUMBER: 515168064
Fence fittingsChain mesh
Temporary fence
Tubular
Gate fittingsCantilever
Sliding gate
Swinging gate
Gate latches
AutomationSliding gate
Swing gate
Boom gates
Accessories
Racks for sliding gates
Decorative fittingsSpears and Post tops
Lattice
Industrial sliding door componentsIndustrial shutter door componentsRuralBuilding hardwareFasteners & paintsShading systemsSafety gate
Latches
Hinges
Downee®
A Division ofRMD Industries Pty LtdABN 31 004 313 937
downee.com.au 5
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Effective July 2011
CHAIN MESH
Universal Rail Clamps - Galvanised
Code Butt CtnUFFB25 25 40UFFB32 32 30UFFB40 40 30UFFB50 50 20
• Australian Patented
Universal Post Clamps - Galvanised
Code Thru CtnUFFT25 25 50UFFT32 32 40UFFT40 40 40UFFT50 50 40UFFT65 65 30UFFT80 80 20UFFT100 100 20
• Australian Patented
Universal Connector - Galvanised
Code CtnUFFMPC 100
• Multi-purpose connector suitlable with all post and rail clamps.
• Use for multi staying of posts, corner struts, raked fences and all add-on fencing situations.
• Design Registrations apply.
Wall Bracket Assembly - Galvanised
Code CtnUFFWB 50
• Used with UFFB and UFFT (all combinations) for spacing and securing post from wall. Allows easy access for wire lacing and close fitment of post to wall
• Comprises: 1 x G14 - 1 Adjustable Bracket 2 x Spacer Washers 1 x M10x40 Bolt
Fence Fittings
UNIVERSAL FENCE FITTING SYSTEM
INSTALLATION NOTES:1. ALL RAIL CLAMPS ARE COMPLETELY INTERCHANGEABLE WITH ALL POST CLAMPS.2. FOR NEATINESS OF INSTALLATION POST CLAMP ATTACHMENT EAR IS HIDDEN BY FIRST RAIL CLAMP.
2,3,4 & UP TO 8 WAY ADJUSTABLE FITTING COMBINATIONS POSSIBLE
VERTICAL RAIL ADJUSTMENT FROM 30˚ TO 150˚ FOR FENCING UP SLOPES OR ADDING MULTIPLE INTEGRAL STAYS.
APPLICATIONSSPORT OVALS - RACECOURSES - MULTI FACETED FENCES - IRREGULARLY SHAPED ENCLOSURES - MULTIPLE ENCLOSURES FENCING INTO TIGHT CORNERS - TENNIS COURTS - CRICKET NETS - BASEBALL NETS - SHADE STRUCTURES - FENCING UP SLOPES
Effective July 2011
Downee®
A Division ofRMD Industries Pty Ltd
ABN 31 004 313 937 downee.com.au6
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICEALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Fence FittingsCHAIN MESH
Code Thru/Butt CtnT1515 15/15 150T2020 20/20 100T2025 20/25 70T2525 25/25 50T2532 25/32 40T2540 25/40 30T3225 32/25 40T3232 32/32 40T3240 32/40 20T3250 32/50 20T4025 40/25 40T4032 40/32 30T4040 40/40 20T4050 40/50 10T5025 50/25 30T5032 50/32 30T5040 50/40 20T5050 50/50 10T6550 65/50 10T8025 80/25 10T8032 80/32 10T8040 80/40 10T8050 80/50 10
Fixed T’s - Galvanised
• Bolts and nuts included
Fixed Crosses - Galvanised
Code Butt/Thru CtnX2020 20/20 50X2525 25/25 30X2532 25/32 20X2540 25/40 30X2550 25/50 20X3232 32/32 20X3240 32/40 20X3250 32/50 10X4040 40/40 20X4050 40/50 10X5050 50/50 10X5065 50/65 10
• Bolts and nuts included
Fixed Corners - Galvanised
Code Butt/Thru CtnC2020 20/20 40C2525 25/25 30C2532 25/32 20C2540 25/40 20
C2550 25/50 20C3232 32/32 20C3240 32/40 10C3250 32/50 10C4040 40/40 10C4050 40/50 10C5050 50/50 5
• Bolts and nuts included
All fittings on this page available in powder coated black for an extra
$2.50ea. MOQ - 1 ctn
Lead times may apply
Code Pipe CtnK19GB 19 1000K20GB 20 300K25GB 25 150K32GB 32 100K40GB 40 80K50GB 50 50K65GB 65 50K80GB 80 40K90GB 90 40K100GB 100 20K125GB 125 20
K150GB 150 10
Round Post Caps - Galvanised - Galvabond
Pipe Straps - Tight Fit - Galvanised
Code Pipe/Width CtnS1T 20/25 100S2T 25/25 70S3T 25/40 30S4T 32/40 30S5T 40/40 30
Code Pipe CtnK20 20 200K25 25 150K32 32 100K40 40 80K50 50 50K65 65 30K80 80 20K90 90 40K100 100 20
Galvanised
Galvabond
Speedee Sleeve - External Pipe Joiners - Galvanised
Code Pipe Length CtnSS25 25 200 30SS32 32 200 25SS40 40 200 20SS50 50 200 10
• Registered Design
CHAIN MESH
Downee®
A Division ofRMD Industries Pty LtdABN 31 004 313 937
downee.com.au 7
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Effective July 2011
Oval Flanges - Galvanised
Code Pipe CtnF20 20 100F25 25 100F32 32 50F40 40 30F50 50 30
Round Flanges - Galvanised
Code Pipe CtnF32R 32 20F40R 40 20F50R 50 20
Fence Fittings
Heavy Duty Square Flanges - Galvanised
Code Pipe CtnF32H 32 30F40H 40 30F50H 50 20
CHAIN MESH CHAIN MESHHinges - Galvanised
Code Post/Gate CtnH5025D 50/25 20H8025D 80/25 10H8032D 80/32 10
Pipe Hinge Straps - Galvanised
Code Pipe/Width CtnS1 20/25 100S2 25/25 50S3 25/40 30S4 32/40 30S5 40/40 30S6 50/40 30
Code Suit CtnA1 S1 200A2 S2 200
A3 S3 100A4 S4 100
Hinge Strap Attachments - Galvanised
Code Post/Gate CtnH2020 20/20 30H2525 25/25 20H3220 32/20 20H3225 32/25 20H4020 40/20 20H4025 40/25 20
Clamp-On
Clamp-On
Code Post/Gate Ctn
H4032 40/32 20H5020 50/20 20H5032 50/32 20
Two Part Hinge + Attachment
Two Part Interlocking Hinge + Attachment
Two Part Hinge + Attachment
Two Part Interlocking Hinge + Attachment
Code Post/Gate CtnH8040 80/40 10H10025 100/25 10H10032 100/32 10H10040 100/40 10
Strap Type Hinges + Attachment
Strap Type Hinge + Attachment
Code Suits CtnBP1 S1 100BP2 S2 100BP3 S3 100BP4 S4 100
Backing Plates - Galvanised
• Use with Pipe Hinge Straps
Long Plate Gudgeons - with Plastic Bush - Galvanised
Code Pipe CtnG12 20 40
G13 25 40
G15 32 40
Code Pipe CtnG24 20 50
G22 25 50
G23 32 30
Heavy Duty Short Plate Bolt Gudgeon - 50mm Steel Pin - Galvanised
Code Pipe CtnG40 20 50
G41 25 50
G43 32 40
Light Duty Short Plate Gudgeon with Plastic Bush - Galvanised
Effective July 2011
Downee®
A Division ofRMD Industries Pty Ltd
ABN 31 004 313 937 downee.com.au8
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICEALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Drop Bolts - Galvanised
Code Size CtnGDB260 260x16ø 20GDB370 370x16ø 20GDB430 430x20ø 10GDB600 600x16ø 10GDB850 850x16ø 10
• Lugs not included
Flag Pin Drop Bolts - Galvanised
Code Size CtnFPDB900 900x16ø 5FPDB1050 1050x16ø 5FPDB1200 1200x16ø 5FPDB1500 1500x16ø 5
• Lugs not included
Security Drop Bolts - Galvanised
• Lugs not included
Drop Bolt Lugs - Galvanised
Gate Entry Brace & Shoot Bolt - Galvanised
Code Length CtnGEB12 190x110x12ø 30
Fence Fittings
Code Length CtnB8 190 40B9 270 20
Shoot Bolt - Galvanised
Corner Bar
CHAIN MESH TEMPORARY FENCETemporary Fence Clamps - Galvanised
Code Pipe CtnTFCN2525 25x25 50TFCN3232 32x32 20TFCN4040 40x40 20TFCN5050 50x50 20
Temporary Fence Clamp Hinge - Galvanised
Code Pipe MinimumTHC4025 40x25 20THC4040 40x40 10THC5050 50x50 10
• MADE TO ORDER ONLY
Code Size CtnFPDS900 900x16ø 5FPDS1200 1200x16ø 5
Code Size CtnL2 16ø 200prsL3 20ø 150prs
• Round 1 x Plain + 1 x Slotted
Wire Strainer
Code Description Ctn12106 Wire strainer 200
Downee®
A Division ofRMD Industries Pty LtdABN 31 004 313 937
downee.com.au 9
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Effective July 2011
Fence Fittings
Square Tube Caps - Domed
Round Tube - Plastic Caps - Polypropylene
Galvabond
Cast AluminiumCode Tube CtnPC5 50x50 100PC6 65x65 100
Square Tube Caps - Flat - Galvabond
Code Tube CtnK90MSGBF 90x90 20K100MSGBF 100x100 30
Code PipePC16BL ø16x1.2-1.6PC19BL ø19x1.2-1.6PC22BL ø22x1.2-1.6PC25BL ø25x1.2-1.6PC28BL ø28x1.2-1.6PC32BL ø32x1.2-1.6PC50BL ø50x1.2-1.6
Square Tube Plastic Caps - Domed - Polypropylene
Code Tube CtnPC5050BL 50x50x2.0-2.5 50PC6060BL 60x60x2.0-2.5 70PC6565BL 65x65x2.0-2.5 40
Profile - Square Tube
Square Tube Plastic Caps - Flat - Polypropylene
Code Pipe ThicknessPC1212BL 12x12 1.6PC1919BL 19x19 1.2-1.6
PC2525BL 25x25 1.2-1.6PC3030BL 30x30 1.2-1.6PC3535BL 35x35 1.6
PC3825BL 38x25 1.2-1.6PC4040BL 40x40 1.6PC5025BL 50X25 1.2-1.6PC5050FLAT 50x50 1.6-2.0PC5735BL 57x35 1.6PC6438BL 64x38 1.6-2.0
PC6535BL 65x35 2.0PC7550F 75x50 1.6-2.0PC10050F 100x50 1.6-2.0PC15050F 150x50 1.6-2.0
TUBULAR TUBULAR
Code PipeIPC25NB 25NBIPC32NB 32NBIPC40NB 40NBIPC50NB 50NBIPC50OD 50ODIPC65NB 65NBIPC90NB 90NB
Plain Caps
Deluxe Ribbed Caps
Code Pipe ThicknessIPC2525 25x25 1.0-3.0
IPC4040 40x40 2.6-4.0IPC4040-1 40x40 1.0-3.0IPC5025 50x25 1.25-3.0IPC5050 50x50 0.8-3.0IPC5050-5 50x50 3.0-5.0IPC6060 60x60 1.6-3.5
IPC6565 65x65 2.0-4.5IPC7525 75x25 1.0-3.0IPC7550 75x50 1.6-4.0IPC7575 75x75 2.0-4.5IPC7638 76.2x38.1 1.2-3.5IPC8040 80x40 1.0-3.0IPC9090 90x90 3.0-5.0IPC10050 100x50 1.6-4.0IPC100100 100x100 1.0-4.0IPC125125 125x125 3.0-6.0IPC150150 150x150 3.0-6.0
Plain Caps
Deluxe Ribbed Caps
Code Tube CtnK25MSGB 25x25 300K35MSGB 35x35 150K40MSGB 40x40 150K50MSGB 50x50 100K60MSGB 60x60 50K65MSGB 65x65 50K75MSGB 75x75 60K90MSGB 90x90 20K100MSGB 100x100 30K150MSGB 150x150 ea
Effective July 2011
Downee®
A Division ofRMD Industries Pty Ltd
ABN 31 004 313 937 downee.com.au10
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICEALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Rail Brackets - Single Lug - Steel - Zinc Plated
Fence Fittings
Code Rail Holes CtnRFB2525-2Z 25x25 2 100RFB3030-2Z 30x30 2 100RFB3825-2Z 38x25 2 100
Rail Brackets - Double Lug - Steel - Zinc Plated
Code Rail Holes CtnDFB2525-2Z 25x25 2 100DFB3030-2Z 30x30 2 100DFB3030-2DZ 30x30 2 Diag 100DFB3825-2Z 38x25 2 100DFB3825-2DZ 38x25 2 Diag 100DFB4040-2Z 40x40 2 100DFB4040-2DZ 40x40 2 Diag 100DFB4040-4Z 40x40 4 100
Code Rail CtnRBA2525 25x25x1.2-1.6 50
Rail Brackets - Cast Aluminium
Adjustable Rail Bracket & Adaptor
Code Rail CtnAD3030 30x30x1.2-1.6 100AD3825 38x25x1.2-1.6 100AD4040 40x40x1.2-1.6 100
Adjustable Rail Bracket - 2 Fixing Holes
Adaptors - Click Fit to Rail Bracket
• For 30x30, 38x25 & 40x40 rails an appropriate adaptor attached to rail bracket is required.
• Australian Design Registered
Code Rail CtnFB25H 25x25 180FB30H 30x30 150FB32H 32x32 150
Horizontal - Single Lug - 1 Fixing Hole
Code Rail CtnFB38H 38x25 120
Horizontal - Single Lug - 2 Fixing Holes
Code Rail CtnFB38P 38x25 90FB40P 40x40 80
Plain - Single Lug - 2 Fixing Holes
FB25H
FB38H
FB40P
FB38MD
Code Rail Ctn
FB40X8P 40x8 200FB40X10P 40x10 200
Plain - Single Lug - 1 Fixing Hole
FB40X8P
Code Rail CtnFB25V 25x25 180FB30V 30x30 150FB32V 32x32 150FB38V 38x25 120
Vertical - Single Lug - 1 Fixing Hole
FB25V
FB50P Code Rail CtnFB50P 50x50 25
Plain - Single Lug - 2 Fixing Holes
Rail Brackets -Cast Aluminium
Code Rail CtnFB25HDL 25x25 150FB30HDL 30x30 130
Horizontal - Double Lug - 2 Fixing Holes
FB25HDL
Code Rail CtnFB38HDLO 38x25 120
Horizontal - Offset Lug - 3 Fixing Holes
FB30HDLO
Code Rail CtnFB2538PDL 25x38 90
Plain - Double Lug - 2 Fixing Holes
FB2538PDL
Code Rail CtnFB40PDL 40x40 60
Plain - Double Lug - 4 Fixing Holes
FB40PDL
Code Rail CtnFB50PDL 50x50 25
Plain - Double Lug - 4 Holes + Security Fixing Hole
FB50PDL
Code Rail CtnFB31.8R 31.8mm 120
Round
FB31.8R
TUBULAR TUBULAR
Code Rail CtnFB38MD 38x25 100
Multi-direction - Single Lug - 2 Fixing Holes
* 15o Vertical 6o Horizontal
Security Rail Brackets - Galvanised
Code Tube CtnSRB620-92 40x40 50SRBA628-92* 40x40 50
Code CtnCUSMS 200
Cover Sleeve - To Suit SRB620-92
Rail Tube End Bracket - Galvanised
Code Suits Ctn
TEB3825 38x25x1.6 100
Rail Tube End Brackets - Plastic - Black
Code Suits CtnPEC3825BL 38x25x1.6 500
• *Adjustable.• *attach to post and rail by pop rivetting.
Downee®
A Division ofRMD Industries Pty LtdABN 31 004 313 937
downee.com.au 11
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Effective July 2011
Fence Fittings
Rail Angle Brackets
Code Finish CtnUC8/10 Galvabond 500UC8/10G Galvanised 500UC19G Galvanised 500
Fence Panel ‘U’ Clips
‘U’ Clip/Panel Fixing Kit
• Contains 20 of UC8/10G and 20 14x10x25 self drilling screws.
TUBULAR TUBULAR
Code Material SizeRAB2030A ALU 20x30x20RAB3030 GAL 30x30x20RAB30x30A ALU 30x30x20RAB35X35 GAL 36x36x20RAB3535A ALU 36x36x20RAB3050 GAL 30x50x20G14 GAL 114x50x5
Timber Rail Joiner Bracket - Galvabond
Code Dimensions CtnJ7154 120x7x54 50
Rail Joiners - Galvabond
Code Suits CtnRJ3825 38x25x1.6 50
Rail Plates - Galvanised
Code Size CtnG86 153x40x5 50
Rail Saddles - Galvabond
Code Suits CtnRS3825 38x25 100
RS4040 40x40 100
Timber Rail Holder Bracket - Galvanised
Code Suits CtnRHB7553P 75x53 Timber 60
Post Brackets - 50x50x1.6 Tube - Galvanised
Code Type CtnPB130-C 4 hole, centered 4PB130-O 4 hole, offset 4
Code Type CtnPB13050 2 hole 10
Code Size Holes CtnF100SP 100x100x5 4 40F130SP 130x130x5 4 20RFP11350-2 113x50x5 2 20RFP15075-2 150x75x5 2 30RFP20095-2 200x95x8 2 10RFP13090-4 130x90x5 4 20RFP150100-4 150x100x5 4 20
Galvanised
Code Size Holes CtnRFP13080-2 130x80x5 2 30RFP130100-4 130x100x5 4 20RFP130130-4 130x130x10 4 10
Zinc Plated
Shark Fin - Galvanised
Code Base CtnSF1 150x100 5
Flange Plate - Weld on
Code Base Size CtnF130S50 130x130x5 20
Square Post Extensions
Code Suits Length CtnPEXT50 50x50mm 350mm 10
Code CtnFITS/TEK20PP 60
Base cover
Code CtnPLASTICBLA 30
• Comes ready to fit 38x25 posts. Snap out panels allow fittings to suit 40x25, 40x40, and 50x50 posts.
• Suits RFP11350-2 Flange Plate.
Effective July 2011
Downee®
A Division ofRMD Industries Pty Ltd
ABN 31 004 313 937 downee.com.au12
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICEALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Gate Fittings
End Cup
Code TypeCGS-346M smallCGS-346P mediumCGS-346G large
Adjustable Tension Bar
Code suitsCGI-40 54mm internal SHS
Adjustable End Bracket
Code WidthCG-30M 53-76mmCG-30P 86-114mmCG-30G 103-150mm
End Wheels
Code TypeCGS-347M smallCGS-347P mediumCGS-347G large
Code Type Length WidthCGS-345M small 3000 68CGS-345M-6 small 6000 68CGS-345P medium 3000 100CGS-345P-6 medium 6000 100CGS-345G large 3000 140CGS-345G-6 large 6000 140
CANTILEVER CANTILEVERCANTILEVER WHEELS PRO-RANGE for gates up to 3Ton/18m opening
Code TypeCGS-350M smallCGS-350P mediumCGS-350G large
Code TypeCGS-350.8M smallCGS-350.8P mediumCGS-350.8G large
5 Wheel Carriages
8 Wheel Carriages
Adjustable Angle Bracket for End Cup
CodeCG-15MCG-15PCG-15G
CANTILEVER RESIDENTIAL KIT
CodeCGS-150KIT
KIT INCLUDES:2 x 5 wheel carriages1 x 6m track (or 2 x 3m track)1 x end cup1 x end wheel4 x top rollers
CANTILEVER WHEELS STANDARD RANGE for gates up to 2Ton/12m opening
Code TypeCGS-250.5P mediumCGS-250.5G large
5 Wheel Carriages
CANTILEVER TRACK
Need help in choosing the right cantilever components?
Ask your Downee sales representative for a custom made cantilever project, inclusive of list of components and size of concrete pad.
Alternatively, email [email protected] with the size of opening and weight of material to receive your custom project quotation.
DOWNEE TECHNICAL SUPPORT LINE: 1800 241 733
Motor base plate for Cantilever residential KIT
Code to suitMH-150BASE MH-SL1S and MH-SL10
Suitable for residential gates up to: 4m x 200Kg or 3m x 300Kg
CANTILEVER COMMERCIAL KIT
CodeCGS-COMKIT
KIT INCLUDES:2 x CGS-350P2 x CGS-347P2 x CGS-346P1 x CGS-345P1 x CGS-345P-6
Suitable for commercial gates up to: 6m x 450Kg
CANTILEVER INDUSTRIAL KIT
CodeCGS-INDKIT
KIT INCLUDES:2 x CGS-350P2 x CGS-347P2 x CGS-346P2 x CGS-345P-6
Suitable for industrial gates up to: 9m x 600Kg
Downee®
A Division ofRMD Industries Pty LtdABN 31 004 313 937
downee.com.au 13
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Effective July 2011
Gate FittingsSLIDING GATE SLIDING GATE
Bolt Down Track, 20mm Wheel - Galvanised
Code size BundleSGT3 3000 x 3 mm 50SGT4 4000 x 3 mm 50SGT6 6000 x 3 mm 50
Concrete-in Track, 20mm Wheel - Galvanised
Code size Bundle287/20CT 3000 x 3mm 54287/20CT-6 6000 x 3 mm 54
Concrete-in track, 20mm Wheel - Galvanised
Code size Bundle287G19 3000 x 4 mm 54
• Can be used with 287FP-G
Code Suits287FP-G 287G19
Recess Kit for 287G19 Track
• To be used with 287G19
2 Ball Bearing Round Wheel with Support - 20mm round track
Code Rating Dia Ctn300550 300kg 90ø 6430/100 380kg 100ø 6300551H 400kg 120ø 6
1 Ball Bearing Wheel with external support - 20mm round track
Code Rating Dia Ctn327-80S 200kg 80ø 6
Code Suits Ctn297G 287G19 10
Track Joiner
Code Suits Ctn300504 287/20CT 10
Grease Gun Twin Wheels - 20mm Track
Code Rating Dia Ctn339-120 1200kg 120ø 2
• 4 Ball bearing each set
1 Ball Bearing Round Wheel with Support - 20mm round track
Code Rating Dia Ctn337-80S 180kg 80ø 6
Code Rating Dia Ctn300550SS 300kg 90ø 2
Code Rating Dia Ctn310-100S 220kg 100ø 8
Wheel - 1 ball bearings - 20mm track
Wheel - 2 ball bearings- 20mm track
Code Rating Dia Ctn300551 450kg 120ø 6300552 575kg 160ø 2300553 625kg 200ø 2
Stainless steel
Code sizeSGT3SS 3000 X 3 mm
Stainless steel
Effective July 2011
Downee®
A Division ofRMD Industries Pty Ltd
ABN 31 004 313 937 downee.com.au14
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICEALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Code Size Ctn300558 40x60mm 2023030 30x40mm 20
Top Roller
Code Size Ctn300557 37x36mm 20
Gate FittingsSLIDING GATE SLIDING GATE
Single Roller Guide - Adjustable “U” Type
Code Adjustability CtnCG-253M 165-185 2CG-253P 185-215 2CG-253G 210-250 2
Double Roller Guide- Adjustable
Code Ctn25530 ea
Code CtnCG-251 ea
Single Roller Guide
Code CtnCG-252 2
Guide Block with angle slide plates
Code Size Ctn080MR30 60x75x70 eaNYBLOC 98x92x59 ea
Big Nylon Roller - to be screwed - Zinc Plated
Code Size Ctn253-40 3
Parrot Beak Lock Kit
Code Frame Size CtnPBL40KIT suit 40 mm post 5PBL50KIT suit 50 mm post 5
1 Ball Bearing Wheel with Support - 16mm round track
Code Rating Dia Ctn337-90 190kg 90ø 6
2 Ball Bearing Wheel with Support - V Groove Track
Code Rating Dia Ctn336-90 300kg 90ø 6
Stops
Code Type300507 Weld on stop
Code Type300507B Bolt on stop
• Roller size 30x40
• Roller size 40x60
Downee®
A Division ofRMD Industries Pty LtdABN 31 004 313 937
downee.com.au 15
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Effective July 2011
Gate Fittings
Bottom Hinge with Thrust Bearing*
Code Rating Size Ctn87PST-P 200kg 45 287PST-M 350Kg 50 287PST-G 500Kg 70 287XL 4000kg adjustable 1
Upper Hinge with L Plate*
Code Rating Size Ctn85L-M 350kg 50 485L-G 500kg 70 2
Upper Hinge Double Adjustment with Plate*
Code Rating Size Ctn85PST-M 350kg 50 485PST-G 500Kg 70 285XL 4000Kg Adjustable 1
Code Rating Size Ctn85W-M 450kg 50 485W-G 650kg 70 2
Upper Hinge*
Code Rating Size Ctn86W-P 200kg 45 2
86W-G 650kg 70 286IW-G*
Upper Hinge with L Plate*
Code Rating Size Ctn86L-P 200kg 45 286L-G 500kg 70 2
SWINGING GATE SWINGING GATE
Bottom Hinge with Thrust Bearing*
Code Rating Size Ctn87W-M 450kg 45 487W-P 200kg 50 487W-G 650Kg 70 2
Hinge - with Wing & Bearing*
Code Rating Ctn92-G 300kg 10
Adjustable Pintle Hinge
Code Ctn100G 200kg 10100P 100kg 20
Code Rating Size Ctn87IW-G 650kg 70 2
Stainless steel
Upper Hinge Double Adjustment*
Hinge with “U” Bolt and Plate - to be screwed
Code Rating Ctn100PST-P 100kg 20
Hinge with Wing and Plate*
Code Rating Ctn94-P 200kg 2094-G 300kg 10
Code Rating Ctn96-G 300Kg 10
with bearing
* Stainless Steel
Bottom Hinge with Thrust Bearing and L Plate*
Code Rating Ctn87L-P 200Kg 487L-M 350kg 487L-G 500kg 2
A
B
W
HINGE CAPACITY ASSUMPTIONS - The weight of the gate (W) is equally distributed.- The gate has an equal width (A) and height (B).- The hinges are mounted on the top and bottom rail of the gate or as close to the top and bottom as possible.
HOW TO CALCULATE HINGE CAPACITY [Width gate (m)]
[Hinge capacity] = [Weight gate (kg)] × [Height gate (m)]
Examples- If you double the width (A) of the gate, the hinge capacity needs to be double the weight of the gate.- If you halve the height (B) of the gate, the hinge capacity needs to be double the weight of the gate.
* Suitable for automation
Effective July 2011
Downee®
A Division ofRMD Industries Pty Ltd
ABN 31 004 313 937 downee.com.au16
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICEALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Gate Fittings
* Suitable for automation
Adjusted Hinge with “U” Bolt & Plate*
Code Rating Ctn161-M20 150Kg 20161-M24 225kg 10
Adjustable Pintle Hinge*
Code Size and Rating Ctn15520 M20 -150kg 2015524 M24 - 225kg 10
Clamp Hinge with Greaser & Plate with adjustable nut*
Code Rating To suit Ctn186-M18 100kg 192-30 20186-M22 160kg 192-35 10186-M27 260kg 192-40 10
SWINGING GATE SWINGING GATE
Holed Pivot Square Base
Code size Ctn192-30 35 X 35 20192-35 40 X 40 10192-40 50 X 50 10
Clamp Hinge Body for Threaded Bar*
Code Rating To suit Ctn185-M27 260kg 192-40 6
Adjustable Hinge - Post Flange Mount, Gate Weld On*
Code Rating Ctn163-M27 320kg 10
Square plate with Adjustable Nut
Code Ctn159-M20 10
Hinge with Long Bar - U Bolt Post 100sq*
Code Rating Ctn130M20 150Kg 20130M24 225kg 10
Big Hinge - 2 Open Wings - Pivot with Washer & Bearing*
Code Rating Ctn445-90 800kg 10
Turned Drop Hinge*
Code Rating Ctn497-100 100kg 10
• Includes brass pivot, washer & bearing
Bolt Down Stop - Zinc Plated
Code Ctn171 10
Swing Stop to Bolt
Code Ctn300508B 25
Swing Stop to Concrete
Code Ctn300508 25
Downee®
A Division ofRMD Industries Pty LtdABN 31 004 313 937
downee.com.au 17
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Effective July 2011
Gate Fittings
Gate Hinge - Fixed Pin - Zinc Plated
Code CtnTGP100 30
Gate Hinge - Adjustable Pin - Zinc Plated
Code CtnTGP110 30
Gate Hinge Packs - Zinc Plated
Code CtnTGP230 20
Fixed Hinges - Top & Bottom
Code CtnTGP240 20
Fixed Top - Adjustable Bottom
• Includes fasteners: - Fasteners - CAC28 - BTS28 - TGP100 - TGP110 - CAP
Self Closing Gate Hinge Packs - Zinc Plated
Code CtnTGP250 20
Fixed Top Self Closing - Fixed Bottom
Code CtnTGP260 20
Adjustable Top - Fixed Self Closing Bottom
Code Tube CtnSGP 25x25x1.2 10
Single Gate Packs
Code CtnDGP 5
Double Gate Pack - Zinc Plated
SWINGING GATE SWINGING GATE
Code CtnTGP120 30
Self Closing Gate Hinge - Fixed Pin - Zinc Plated
All Gate Hinge Packs include bushes for: 25x25 to fit 25x25x1.2 tube30x30 to fit 30x30x1.2 tube38x25 to fit 38x25x1.2 tube
• Includes: - TPG100 x 2 - TPG110 x 2 - BG13L x 1 - CAC28 x 1• Fasteners: - BTS28 x 2 - CAPS x 2
Code Tube CtnLBGA40 40x40 10prs
Hinge for 40x40 SHS - Pair
Effective July 2011
Downee®
A Division ofRMD Industries Pty Ltd
ABN 31 004 313 937 downee.com.au18
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICEALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Gate Fittings
Ball Bearing Security Hinge - Weld on - Heavy Duty
Code Rating CtnG121R 650kg 5 prG121L 650kg 5 pr
Ball Bearing Gate Hinge - Bolt-on - Loose Pin
Code Rating CtnG1R 200kg 12 prG1L 200kg 12 pr
Ball Bearing Hinge - Bolt-on/Weld-on - Zinc
Steel to Steel Double Ball Bearing Hinges - Weld on - Zinc Plated
Code Rating CtnG4DR 200kg 10prG4DL 200kg 10pr
Butt Hinges
Rising Hinges - Zinc Plated
Code Rating CtnG7R 80kg 1 prG7L 80kg pr
• Both Top & Bottom hinges provided
Code Rating CtnG1RGAL 200kg 12 prG1LGAL 200kg 12 pr
Zinc Plated
Galvanised
Code Rating CtnG4R 200kg 20 prG4L 200kg 20 pr
Code Rating CtnG4RGAL 200kg 20 prG4LGAL 200kg 20 pr
Zinc Plated
Galvanised
Code Size CtnHLP100X75 100x75 40 prHLP100X100 100x100 30 pr
Code Size CtnHFP100X75 100x75 20 prHFP100X100 100x100 30 pr
Loose Pin - Zinc Plated
Fixed Pin - Zinc Plaed
Code Size CtnHSS10075 100x75 20 prHSS100100 100x100 10 pr
Fixed Pin - Stainless Steel
SWINGING GATE SWINGING GATE
Double Butt Ball Bearing Hinge - Bolt on
Code Rating Ctn G8R 200kg 15 prG8L 200kg 15 pr
Code Rating CtnG8RGAL 200kg 15 prG8LGAL 200kg 15 pr
Zinc Plated
Galvanised
Scotch T Hinges - Galvanised - Brass Pin
Code Size CtnH150G 150 mm prH200G 200 mm prH250G 250 mm prH300G 300 mm pr
Code CtnPH75 Zinc Plated 30 pr
PH75SS Stainless Steel 30 pr
Hinges - Zinc Plated
Code Size CtnNBZP8560 85x60 50 pr
Downee®
A Division ofRMD Industries Pty LtdABN 31 004 313 937
downee.com.au 19
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Effective July 2011
Gate Fittings
Bolt-On ‘D’ Latches & Strikers - Flat
Code CtnCAC28 Latch 50BTS28 Striker 50BTS29 Striker 50
Two Way Catches - Zinc Plated
Code Suits CtnCAC5 20NB 20CAC6 25 / 32 NB 20
• Catch can be made ‘one way’ by moving the locking fixture to one end
‘D’ latch & Strikers - Round Post - Weld On - Zinc Plated
Code CtnCAC26 Latch 50CAC26WS Striker 50
Weld-On ‘D’ latch & Strikers - Square Post Weld On
Code Description CtnCAC27 Latch 50CAC27WS Striker 50
‘D’ Latch Handles - Zinc Plated
Code Length CtnTB28-170 170 50TB28-230 230 50
Striker Anti Rattle Sleeve - Black Vinyl
Code Suits CtnSARS All Strikers 50
Code CtnCAC28G Latch 50BTS28G Striker 50
Zinc Plated
Galvanised
Bolt-On “D” Latch - Stainless Steel
Code Description
GRAMLS Latch & StrikerRGRAMHAN Handle
• Handle is universal - can be used for right or left side
GATE LATCHES GATE LATCHES
Code CtnDLKPP 50
Pack Set - CAC28 + BTS28 + TB28-170
‘D’ Latch & Striker - Round Post - Bolt On - Zinc Plated
Code Description CtnCAC29 Latch 50BTS28R Striker 50
Drop Bolt + Side Plates - Locking
Code Bolt Length CtnB13L 300 20B15L 400 20B15LG 400 20B17L 500 20
Gate Pad Bolts
Code Bolt lengthG18DGAL 175
Zinc PlatedCode Bolt lengthG17G 100G18D 175
GPBL10 210
Galvanised
Effective July 2011
Downee®
A Division ofRMD Industries Pty Ltd
ABN 31 004 313 937 downee.com.au20
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICEALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Gate Fittings
Lock & Handle - To Suit Steel Privacy Gate
Secura-Gate Spring Loaded Gate Lock & Gravity latch
Code CtnP705L 20 ea
Coil Type Spring - Zinc Plated
Code DescriptionG305 360mm Long
• Tension Adjuster and Lock Pin
Hasp & Staple - Heavy Duty - Zinc Plated
Code SizeG58 183 x 48
CodeG62
• Includes locking handle, lotch/rear handle, guide, keeper and screw
• 2 keys supplied
Manta Dual Side Magnetic Latch
Code Gate Frame CtnManta 50-80 5 ea
Gravity Latch
Code Fence Post CtnDPG100 35-125 10 ea
GATE LATCHES GATE LATCHES
Code Fence Post CtnDPG200 40-125 5 ea
Code Fence Post CtnDPG300 50-125 5 ea
Gate Lock - Black
Code Gate Frame73-40BLACK 4073-50BLACK 50
Gate Lock - Mill
Code Gate Frame73-40MILL 4073-50MILL 50
Aluminium Striker for Gate Lock 73
Code73-AS
Broadhurst Lock Kits
Code Description CtnBHL Broadhurst lock eaBHLDBL* Double lock box kit eaBHLLB lock box ea
*CONTENTS DOUBLE LOCK BOX KIT• 2 x Lock Boxes• 1 x Slide Bar• 1 x Slide Bar Catch For Single Gate• 1 x Slide Bar Catch for Double Gates• 1 x Lock Box Plate
Downee®
A Division ofRMD Industries Pty LtdABN 31 004 313 937
downee.com.au 21
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Effective July 2011
Automation
24V - 400kg - 5m Sliding Gate Kit - Compatible with MH-SUN
Code DescriptionMH-SL1S Full KitMH-SL1S/02 Start Kit
24V -Sliding Gate SPLIT PACK Kit - With separate power supply
Code DescriptionMH-SL1S-SP Split Pack of MH-SL1SMH-SL1S/02SP Split Pack of MH-SL1S/02MH-SL10SP Split Pack of MH-SL10MH-SL10/02SP Split Pack of MH-SL10/02
FEATURES• Self Programming• 2 Speed• Timed and Adjustable auto closing function• Partial Opening• Easy connection with ECS Bus System
FEATURES• Low voltage connection to the motor, no need to have
power point at the gate• Self Programming• 2 Speed• Timed and Adjustable auto closing function• Partial Opening• Easy connection with ECS Bus System
FULL KIT INCLUDES GATE MOTOR AND CONTROL UNIT plus the following:
• Brackets & fixings• 2 Transmitters• 1 Pair of ECS BUS photocells• 1 Key Selector• 1 Flashing light with built in antenna
START KIT INCLUDES GATE MOTOR AND CONTROL UNIT plus the following:
• Brackets & fixings• 1 Transmitter
24V - 500kg Sliding Gate Kit
Code DescriptionMH-SL10 Full KitMH-SL10/02 Start Kit
FEATURES• Self Programming• 2 Speed• Timed and Adjustable auto closing function• Partial Opening• Easy connection with ECS Bus System
240V - 1500kg Sliding Gate Motor - low duty cycle
Code DescriptionMH-SL1500 Motor Only
FEATURES• Up to 1500kg• Electronic Clutch• Diecast Aluminium Body• Master/Slave functioning to operate 2 MH-SL1500
simultaneously• Can be equipped with MH-R2 receiver to be remotely
operated
240V - 2000kg Sliding GateMotor - 100% Duty Cycle
Code DescriptionMH-SL7500 Motor Only
FEATURES• Built in encoder system, no limit switch required• 100% duty cycle three phase 0.75KW motor• Variable speed inverter with 4 different speeds• Track or Cantillever gates up to 2 tonnes• Galvanised sheet powder coat cabinet• Can be equipped with MH-R2 receiver to be remotely
operated
SLIDING GATE KITS SLIDING GATE KITS
SOLAR OPTION - EASY PLUG’N PLAY
Code DescriptionMH-SUN Solar panel and batteries
COMPATIBLE WITH:• MH-SL1S, MH-SL1S/02• MH-WG2S, MH-WG2S/02 • Soon compatible with the entire range of products
FEATURES• Easy connections - cables included• Developed to suit Australian climate
SPECIAL ALL IN ONE KIT
CodeMH-SLGATEPACKMH-SLGATEPACKSPMH-SLGATEPACKHD
INCLUDES• 1 x MH-SL1S/02 or MH-SL1S/02SP (MH-SLGATEPACKSP) or
MH-SL10/02 (MH-SLGATEPACKHD)• 1 X extra MH-TX4• 4 X MH-4FPNR length of gear rack• 2 X SGT3 lenght of bolt down track• 2 X 300550 wheels• 2 X 23030 top rollers
CodeMH-AUTOPACK
INCLUDES• 1 x MH-SL1S/02• 1 X extra MH-TX4• 4 X MH-4FPNR length of gear rack
For a complete list of the safety devices recommended with our gate openers please refer to page 24 and 32
Downee technical support line: 1800 241 733
Effective July 2011
Downee®
A Division ofRMD Industries Pty Ltd
ABN 31 004 313 937 downee.com.au22
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICEALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Automation
24V - Worm Drive - 250kg/2m leaf - Compatible with MH-SUN
Code DescriptionMH-WG2S Double Leaf Full Kit
MH-WG2S/02 Double Leaf Start KitMH-WG1S Single Leaf Full KitMH-WG1S/02 Single Leaf Start Kit
FEATURES• Self programming• 2 speed• Timed and adjustable auto closing function• Partial/Single leaf opening• Easy connection with ECS bus system• Require gate stops in opening and closing
position
24V - Worm Drive - 400kg/4.5m leaf
Code DescriptionMH-WG20 Double Leaf Full Kit
MH-WG20/02 Double Leaf Start KitMH-WG10 Single Leaf Full KitMH-WG10/02 Single Leaf Start Kit
FEATURES• Self programming• 2 speed• Timed and adjustable auto closing function• Partial/Single leaf opening• Easy connection with ECS bus system• Require gate stops in opening and closing
position• Electric lock is strongly recommended for single
gates above 2.5m
24V - Articulated arm wall mounted - 200kg/2m leaf
Code DescriptionMH-WS2 Double Leaf Full Kit
MH-WS2/02 Double Leaf Start KitMH-WS2/02SP Double Leaf Start Kit*MH-WS2SP Split packMH-WS1/02 Single Leaf Start Kit
FEATURES• Self programming• 2 speed• Timed and adjustable auto closing function• Partial/Single leaf opening• Easy connection with ECS bus system• Require gate stops in opening and closing
position
24V - Semi underground - 200kg/1.8m leaf
Code DescriptionMH-WU2 Double Leaf Full Kit
MH-WU2/02 Double Leaf Start KitMH-WU1/02 Single Leaf Start Kit
FEATURES• Self programming• 2 speed• Timed and adjustable auto closing function• Partial/Single leaf opening • Easy connection with ECS bus system• Require gate stops in opening and closing
position• No side room needed - can open up to 180o
• No drainage required - IP 67• No foundation box required. To be bolted on
the ground or concreted in
24V - Articulated arm ground mounted - 200kg/1.8m leaf
Code DescriptionMH-WK2 Double Leaf Full Kit
MH-WK/02 Double Leaf Start Kit
FEATURES• Self programming• 2 speed• Timed and adjustable auto closing function• Partial/Single leaf opening • Easy connection with ECS bus system• Require gate stops in opening and closing
position
SWING GATE SWING GATE
SOLAR OPTION - EASY PLUG’N PLAY
Code DescriptionMH-SUN Solar panel and batteries
COMPATIBLE WITH:• MH-SL1S, MH-SL1S/02• MH-WG2S, MH-WG2S/02 • Soon compatible with the entire range of products
FEATURES• Easy connections - cables included• Developed to suit Australian climate
FULL KIT INCLUDES GATE MOTOR AND CONTROL UNIT plus the following:
• Brackets & fixings• 2 Transmitters• 1 Pair of ECS BUS photocells• 1 Key Selector• 1 Flashing light with built in antenna
START KIT INCLUDES GATE MOTOR AND CONTROL UNIT plus the following:
• Brackets & fixings• 1 Transmitter
• * Split Power
Downee®
A Division ofRMD Industries Pty LtdABN 31 004 313 937
downee.com.au 23
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Effective July 2011
Boom Gate Arms and Accessories
Code Description
MH-WA1 White Aluminium Bar - 36x73x4250mm. To suit MH-BG4
MH-WA2 8m Pack Red Shockproof rubber strip with caps
MH-WA3 White Tubular Aluminium Bar - 70x4250mm. To suit MH-BG4. To be used with MH-WA4
MH-WA4 Connection for the MH-WA3 bar
MH-WA7 White Tubular Aluminium Bar - 70x6250mmTo suit MH-BG6. To be used with MH-WA8
MH-WA8 Connection for MH-WA7 bar
MH-WA21 White Aluminium Bar - 36x94x6250mm. To suit MH-BG6
MH-WA24 8m White Aluminium tubular telescopic bar. To suit MH-BG6
MH-WA11 Adjustable stand for bars
MH-WA12 Mobile stand for bars
MH-WA10MH Red adehsive reflective strips
BOOM GATES
Automation
FEATURES• Boom gate motors for barriers up to 8m in length• Galvanised steel, painted case• Incorporated control unit, can be removed for easy wiring• Easy to install, the bar can be assembled on either the right or left
hand side• Speed can be electronically adjusted
- 3.5 sec min opening time - MH-BG4- 5 sec min opening time - MH-BG6
• Anti-crush safety feature, in opening and closing• Optional back up battery• Can be equipped with MH-R2 receiver to be remotely operated
24V - Heavy Duty Boom Gate Opener
Code DescriptionMH-BG4 Motor, cabinet and
control to suit 4m barMH-BG6 Motor, cabinet and
control to suit 6m barMH-CARICA Battery charger for
MH-BG4 and MH-BG6MH-B12B 12V - 6Ah batteries
Effective July 2011
Downee®
A Division ofRMD Industries Pty Ltd
ABN 31 004 313 937 downee.com.au24
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICEALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Code Description
MH-TX4 4 Channel Remote Control
MH-DS1 3 Channel wireless keypad
MH-PR1* 24V Buffer Battery
MH-PLA10 12V Vertical Electric Lock - MH-EL1 required for correct functioning
MH-PLA11 12V Horizontal Electric Lock - MH-EL1 required for correct functioning
MH-EL1 Electric Lock Adapter
MH-PH0 Pair of Photocells - To suit MH-SL1500, MH-SL7500, MH-BG4 and MH-BG6
MH-PH1* Pair of ECS Bus Photcells
MH-PT50* Pair of ECS Bus Photocells on 485mm Post
MH-PT100* Double Pair ECS Bus Photocells on 945mm Post
MH-R2 Pre-Wired 12V/24V MH-TX4 and MH-DS1 universal receiver - 2 Channel
MH-RC2 240V Control Unit with Built in receiver & 2 timers
MH-TXWALL Wall Support For MH-TX4 Remote
MH-MGL Magnetic Lock
MH-LOOP Loop Detector with 11 Pin Socket & 6m Round Cable + 15m Lead
MH-MOM Proximity Reader - MH-MORX required for correct functioning
MH-MORX Decoder
MH-MOCARD Transponder Card
MH-DIGITALTIMER Timer to schedule automatic gate opening & closing
MH-FL1* Flash Light
MH-KS1* Key Switch Selector
MH-MOT Multicode Digital keypad - MH-MORX required for correct functioning
MH-PIU Expansion Card for MH-SL1500 to allow for trafic lights control, courtesy light, partial open input and electric lock output
MH-TXBATTERY Lithium CR2016 3V Battery - Suits MH-TX4 remotes
AutomationACCESSORIES *To suit all gate motors in catalogue except MH-SL1500 and MH-SL7500
Downee®
A Division ofRMD Industries Pty LtdABN 31 004 313 937
downee.com.au 25
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Effective July 2011
Nylon Rack with Steel Core - Max 500kg
Code DescriptionMH-4FPNR 1m with 4 fixing points
Nylon Rack with Steel Core - Max 700kg
Code DescriptionMH-6FPNR 1m with 6 fixing points
1m Nylon Rack with Steel Core - Max 700kg
Code Description
MH-6FPNRUP 1m with 6 fixing points face UP
Steel rack to Weld on - Max 2200kg
Code DescriptionMH-STER Steel Rack 22 x 22 - 1mtre
Steel rack with Holes
Code DescriptionMH-STERHOL Steel rack with holes 30x8x1m
MH-STERHOL2 Steel rack with holes 30x8x2m
RACKS FOR SLIDING GATES
Automation
Bolt Through Spacer
Code Description263 Bolt through connector
Weld on Spacer for MH-STERHOL
Code Description264 Weld on Spacer
“L” Shape Bolt on Spacer for MH-STERHOL
Code Description266 “L” Shape Bolt
FIXINGS FOR STEEL RACKS WITH HOLES
Effective July 2011
Downee®
A Division ofRMD Industries Pty Ltd
ABN 31 004 313 937 downee.com.au26
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICEALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
SPEARS - Aluminium
Decorative FittingsSPEARS - Aluminium
Code To Fit Size CtnSPG19 15.9ø 100x47 200SPG1 16ø 100x47 200SPG15 19ø 100x47 200
Clover - Female
Fleur de lis - Female
Code To Fit Size CtnSPJN19 15.9ø 100x68 125SPJN1 16ø 100x68 125SPJN15 19ø 100x68 125
Fleur de lis - Female
Code To Fit Size CtnSPJ2 12ø 100x68 125SPJ19 15.9ø 100x68 125SPJ1 16ø 100x68 125SPJ15 19ø 100x68 125
Fleur de lis - Male
Code To Fit Size Ctn
SPJ13 15.9øx1.216øx1.2 100x68 125
SPJ7 19øx1.2 100x68 125
SPJ17 19SQx1.220SQx1.6 100x68 125
Acorn - Female
Code To Fit Size CtnSPL19 15.9ø 55x32 125SPL1 16ø 55x32 125SPL15 19ø 55x32 125
Bishop - Female
Code To Fit Size CtnSPM59 16.0x1.2 170x98 40SPM83 19ø 170x98 40
Aston - Male
Code To Fit Size Ctn
SPS13 15.9øx1.216øx1.2 89x45 150
SPS7 19øx1.2 89x45 150
SPS17 19SQx1.220SQx1.6 89x45 150
SPS40 25.4SQx1.2 89x45 150SPS43 25.4SQx1.6 89x45 150
Cardinal - Male
Code To Fit Size CtnSPQ7 19ø 110x30 100
Cardinal - Female
Code To Fit Size CtnSPQ19 15.9ø 110x30 100SPQ1 16ø 110x30 100SPQ15 19ø 110x30 100SPQ21 19SQ 110x30 100
Lilium - Female
Code To Fit Size CtnSPU9 16ø 150x65 60SPU33 19ø 150x65 60
Downee®
A Division ofRMD Industries Pty LtdABN 31 004 313 937
downee.com.au 27
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Effective July 2011
Melrose - Female
Code To Fit Size CtnSPT31 15.9ø 150x38 80SPT9 16ø 150x38 80SPT33 19ø 150x38 80SPT8 20ø 150x38 80
Melrose 8 sided- Male
Code To Fit Size CtnSPT1 16ø 100x28 150SPT2 19ø 100x28 150
Code To Fit Size Ctn
SPT13 15.9øx1.216øx1.2 110x28 220
SPT7 19øx1.2 110x28 220
SPT17 19SQx1.220SQx1.6 110x28 220
Melrose - Male
Camden - Female
Code To Fit Size CtnSPW9 16ø 150x62 60SPW33 19ø 150x62 60
SPEARS - Aluminium PICKET TOPS - Aluminium Windsor
Code Size To Fit CtnPITWIN 100x55 75x16x0.9 60
Kenilworth
Code Type Size To Fit CtnPITFLAT Low Profile 50x5 50x10x0.9 400PITKENISR Round 50xR25 50x10x0.9 350
Stonnington
Code Type Size To Fit CtnStonnington SmallPITSTONSP Plain 115x50 50x10x0.9 150PITSTONSF Fancy 115x50 50x10x0.9 150
Stonnington Large - For use with Aluminium tubePITSTONLP Plain 140x65 65x16x1.2 60PITSTONLF Fancy 140x65 65x16x1.2 60
Decorative Fittings
Camden -Female
Code To Fit Size CtnSPC19 15.9ø 100x42 200SPC1 16ø 100x42 200SPC15 19ø 100x42 200
Code To Fit Size CtnSPC31 15.9ø 150x62 60SPC9 16ø 150x62 60
Code To Fit Size Ctn
SPT36 15.9øx1.216øx1.2 150x38 80
SPT38 19øx1.2 150x38 80SPT37 19SQx1.2 150x38 80SPT42 25.4SQx1.6 150x38 80SPT43 25.4SQx1.2 150x58 80
Effective July 2011
Downee®
A Division ofRMD Industries Pty Ltd
ABN 31 004 313 937 downee.com.au28
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICEALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Ball - Square Tube
POST CAPS - Aluminium POST CAPS - AluminiumClip Ons
Decorative Fittings
Code To Fit SizeSquare Tube - FemalePT50F 50SQ 95Hx50øSquare Tube - Male
PT50M 50SQx1.6 105Hx53ø50.8SQx2.0
PT65M 65SQx1.6-2.5 115Hx65øPT75M 75SQx2.3-4.0 125Hx75øPT100M 100SQx2.5-4.0 165Hx100ø
Ball - Round Pipe
Code To Fit SizeGalvanised Pipe - MalePT50NBM 50NB 115Hx65øPT90NBM 90NB 170Hx90øPT100NBM 100NB 194Hx105ø
Victorian Post Cap
Code To Fit SizePTVPC100 100SQ 230 HighPTVPC125 125SQ 290 HighPTVICSP*
Code Size CtnCO-SANTA-ANA 390x170mm 230 High
Code To Fit Size CtnFENDEC-16 16.0 45x45mm 125FENDEC-19 19.0 125
Clip Ons
Fence Panel Rings - Aluminium with Mill Finish
Code Size CtnFPRA78-8 78x8 100FPRA90-8 90x8 100
Fence Panel Rings - Steel with Gold Passivate
Code Size CtnFPRZ78-8 78x8 100FPRZ82-8 82x8 100FPRZ90-8 90x8 100FPRZ100-8 100x8 100
Code Size CtnFPRA78-10 78x10 100FPRA100-10 100x10 100
Code Size CtnFPRZ90-10 90x10 100
Code Description To FitPMA90M 172x172x75 90SQPMA100M 172x172x75 100SQ
Postmaster Verandah Post Supports
Code Description To Fit
PBA100SH Concealed fixing 50sqx1.6
PBA100FH 4 hole external fixing 50sqx1.6
Post Bases - Cast Aluminium
Post Supports & Post Bases
* Registered Design. Tested & Complies to AS1926.1
* Victorian Spear Kit: spear 150 high + Stud + Nut (cap not included). Cap with min. 44ø area
Decorators
Code Size CtnDPDVA 671x120 ea
Code Size CtnDFCZ* 120x120 100
Code Size CtnDFSA** 120x120 100
Die casting Aluminium
2 part interlocking
Downee®
A Division ofRMD Industries Pty LtdABN 31 004 313 937
downee.com.au 29
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Effective July 2011
LATTICE - Aluminium LATTICE - Aluminium Panels - Double sided - Mill Finish
Decorative Fittings
Newels - Double Sided - Mill Finish
Corner & Frieze
Code Type SizeCORWESM Corner 400x400FRIWESM Frieze 800x75
Westminister
Code Type SizeCORDORM Corner 400x450
FRIDORM Frieze 800x135
Dorrington
Droppers - Small - to suit Westminister & Dorrington Frieze
Code SizeFDRSM 220x50
Suits Westminister & Dorrington
Code Size with lugs
NEWKIRM 850x180
KirbyKirby
Code Size with lugs
NEWHUNM 882x210
Huntley
Huntley
Code Size with lugs
NEWGLAM 810x215
Glamis
Glamis
Code Size with lugs
NEWHERM 910x200
Heritage
Heritage
Code Size with lugs
PANDURM 790x255
DurhamDurham
Code Size with lugs
PANCROM 695x375
CroxdenCroxden
Code Size with lugs
PANREAM 825x345
Reading
Reading
Code Size with lugs
PANHERM 940x500
Heritage
Heritage
Code Size with lugs
PANHENM 720x410
Hendon
Hendon
Code Size with lugs
PANBOXM 810x450
Boxley
Boxley
Code Size with lugs
PANCONM 920x842x16.5
Contemporary
Contemporary
Code Size with lugs
PANDERM 885x480
DerbyDerby
Code Size with lugs
NEWSUNM 814x195
SunflowerSunflower
Code SizeBRAJASM 440x440
Brackets Jasmine
Effective July 2011
Downee®
A Division ofRMD Industries Pty Ltd
ABN 31 004 313 937 downee.com.au30
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICEALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Industrial Sliding Door Components120 Series - Doors Up to 120kg
200 Series - Doors Up to 200kg
Code DescriptionDT120-61 Track - Length: 6100DT120HS2 Hanger, 2 Wheel, SteelDT120HN2 Hanger, 2 Wheel, NylonDT120HS4 Hanger, 4 Wheel, SteelDT120HN4 Hanger, 4 Wheel, NylonDT120-1 Side Fix BracketDT120-1A Offset Bracket - 25mmDT120-2 Overhead Bracket - Bolt OnDT120-5A Angle Bracket - DoubleDT120BS Bolt, Nut & Washer SetDT120-200TP Top Plate AssemblyDT120-200TS Track Stop with Buffer
Code DescriptionDT200-61 Track - Length: 6100DT200HS2 Hanger, 2 Wheel, SteelDT200HN2 Hanger, 2 Wheel, NylonDT200HS4 Hanger, 4 Wheel, SteelDT200HN4 Hanger, 4 Wheel, NylonDT200-1 Side Fix BracketDT200-1B Offset Bracket - 25mmDT200-2 Overhead Bracket - StdDT200-6B Double Overhead BracketDT200BS Bolt, Nut & Washer SetDT120-200TP Top Plate AssemblyDT120-200TS Track Stop with Buffer
450 Series - Doors Up to 450kg - Bracket Spacing 600mm
Code DescriptionDT450-61 Track - Length: 6100DT450HS2 Hanger, 2 Wheel, SteelDT450HN2 Hanger, 2 Wheel, NylonDT450HS4 Hanger, 4 Wheel, SteelDT450HN4 Hanger, 4 Wheel, NylonDT450-650/SAB Single Angle BracketDT450-650/5A Double Angle BracketDT450-650/1 Side Fix BracketDT450-650/2 Overhead Bracket - Bolt OnDT450-650BS Bolt, Nut & Washer SetDT450-650TS Track Stop with Buffer
650 Series - Doors Up to 650kg - FIRE DOOR CERTIFIED
Code DescriptionDT650-60 Track- Length: 6000 x 3DT450HS4 Hanger, 4 Wheel SteelDT650/1S Side Fix BracketDT650/2S Overhead Bracket Bolt-on
BRACKET SPACING GUIDE
DOOR WEIGHT120 Series 120 kg 100 kg 80 kg 70 kg 60 kg 50 kg <50 kg
200 Series 200 kg 160 kg 130 kg 100 kg 85 kg 80 kg <80 kg
450 Series 450 kg 400 kg 320 kg 260 kg 220 kg 170 kg <170 kg
650 Series 650 kg 530 kg 420 kg 330 kg 260 kg 210 kg <210 kg
Bracket Spacing 600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm
Parrot Beak Lock Kit
Code Frame SizePBL40KIT 40 mmPBL50KIT 50 mm
Guide System
Code Guide DT94B Brass channel 3 mDT106RB/94 guide roller for DT94B
Downee®
A Division ofRMD Industries Pty LtdABN 31 004 313 937
downee.com.au 31
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Effective July 2011
120 SeriesDoors up to 120kg
200 SeriesDoors up to 200kg
450 SeriesDoors up to 450kg
650 SeriesDoors up to 650kg
Size: 34x30Gauge: 1.0Length: 6100
Size: 45x36Gauge: 1.2Length: 6100
Size: 66x55Gauge: 1.5Length: 6100
Size: 66x55Gauge: 3.0Length: 6000
Steel Wheel:DT120HS2Nylon Wheel:DT120HN2
Steel Wheel:DT200HS2Nylon Wheel:DT200HN2
Steel Wheel:DT450HS2Nylon Wheel:DT450HN2
Steel Wheel:DT120HS4Nylon Wheel:DT120HN4
Steel Wheel:DT200HS4Nylon Wheel:DT200HN4
Steel Wheel:DT450HS4Nylon Wheel:DT450HN4
Steel Wheel:DT450HS4
Overhead Weld on Bolt on: DT120-2
Overhead Weld on Bolt on: DT200-2
Overhead Weld on Bolt on: DT450-650/2
Overhead Weld on Bolt on: DT650/2S
Side Fix Bracket: DT120-1
Side Fix Bracket: DT200-1
Side Fix Bracket: DT450-650/1
Offset Bracket: DT120-1A
Offset Bracket: DT200-1A
Angle Bracket-Single: DT450-650/SAB
Overhead Double Bracket: DT120-5A
Overhead Double Bracket: DT200-6B
Bolt, Nut & Washer Set: DT120BS
M8X20 C/SinkBolt, Nut & Washer Set: DT200BS
5/16”x1 1/2 “ CupBolt, Nut & Washer Set:DT450-650BS
1/2”x1 1/2 “ Cup 1/2”x1 1/2 “ Cup
Trackstop with Buffer: DT120-200TS
Trackstop with Buffer: DT450-650TS
Trackstop with Buffer: DT120-200TS
Bolt, Nut & Washer Set:DT450-650BS
Side Fix Bracket: DT650/1S
Industrial Sliding Door Components
Angle Bracket-Double: DT450-650/5A
DT450-650JOINER DT450-650JOINERDT120JOINER DT200JOINER
COMING SOON COMING SOON COMING SOON COMING SOON
Effective July 2011
Downee®
A Division ofRMD Industries Pty Ltd
ABN 31 004 313 937 downee.com.au32
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICEALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Industrial Shutter Door ComponentsCOMMERCIAL AND INDUSTRIAL DOORS
916Mhz wireless key switch
CodeMSWKS
Pair of photocells with wireless transmitter
CodeMSPHIRIT2208
Shutter Central Motor
Code Rating TubePS1.60SFAEC (240V) 180kg 60NBPS1.60SFAEC24 (24V)* 100Kg 60NB
Code Rating TubePS1.76AFAEC (240V) 180kg 76NB
Code Rating TubePS2.60EC (240V) 280kg 60NB
Code Rating TubePS2.76EC (240V) 280kg 76NB
Wireless Safety edge - For shutter doors and sliding gates
Code SizeEDGESHORT UP to 1mEDGELONG 1m to 2m EDGEVLONG 2m to 3m
Motorised Shaft for commercial and industrial doors up to 250Kg or 4.5m high
Calculated by Downee engineers & made to specification.
MADE TO MEASURE TO SUIT YOUR CLOSING DEVICE.Includes:- aluminum strip to fix on gate or door- rubber edge to slide on aluminum strip- electronic comopnents (wireless transmitter that sits on the gate/door and receiver to connect to control unit)
Shutter control unit
Code to suitMSCONTROL PS1 and PS2 240V motorsMSCONTROL24 PS1 24V motor
Features:• Automatic closing• Dead Man operation• Built in 916Mhz receiver• Charger for buffer battery (MSCONTROL24 only)• Can be fitted with 240V Plug
916 MHz - 12/24V receiver
CodeMSREC
Features:• Intensive usage• Suitable for backup battery• Built in obstacle detention
Features:• works with MSCONTROL, MSCONTROL24 and MSREC
916 MHz - 2 channels rolling code transmitter
CodeMSDTX
Features:• works with MSCONTROL, MSCONTROL24 and MSREC
Downee®
A Division ofRMD Industries Pty LtdABN 31 004 313 937
downee.com.au 33
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Effective July 2011
Rural
Timber Post Gudgeon - Screw In - Galvanised
Code Gate CtnG1B 20NB 30G3B 25NB 20G4B 32NB 20
Timber Post - Bolt Thu - Galvanised
Code Gate Post CtnG7B 25NB 300 20G8B 25NB 400 20
Code Gate Post CtnKQ2 32NB 300 10KQ1 32NB 400 10
Code Gate Post CtnKQS2S 32NB 300 10KQS1S 32NB 400 10
Code Gate Post CtnS7B 25NB 300 20S8B 25NB 400 20
Timber Post Strap - Bolt Thru - Galvanised
Code Gate Post CtnS7C 25NB 300 20S8C 25NB 400 20
TIMBER POST FITTINGS TIMBER POST FITTINGS
Long Plate Gudgeons - with Plastic Bush - Galvanised
Code Pipe CtnG12 20 40G13 25 40
Code Pipe CtnG24 20 50G22 25 30G23 32 50
Heavy Duty Short Plate Bolt Gudgeon - 50mm Steel Pin - Galvanised
Code Pipe CtnG40 20 50G41 25 50G43 32 40
Light Duty Short Plate Gudgeon with Plastic Bush - Galvanised
Pipe Hinge Straps - Galvanised
Code Pipe/Width CtnS1 20/25 100S2 25/25 50S3 25/40 30S4 32/40 30
Code Suit CtnA1 S1 200A2 S2 100A3 S3 100A4 S4 100
Code Suits CtnBP1 S1 200BP2 S2 100BP3 S3 100BP4 S4 100
Angle Post Gudgeon and Strap - Galvanised
Code Gate CtnAPS25 25NB 40
Code Gate CtnAPG25 25NB 20
Timber Post Gudgeon- Zinc Plated
Code Pipe CtnTPG25 25 40
Effective July 2011
Downee®
A Division ofRMD Industries Pty Ltd
ABN 31 004 313 937 downee.com.au34
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICEALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Weld on Socket - 12mm
Code Type Pin CtnWOS12 Socket 12 100WOP12 Pin 12 100WOS16 Socket 16 50WOP16 Pin 16 50WOS20 Socket 20 30WOP20 Pin 20 30WOS20L Socket 20 30WOP20L Pin 20 30WOS27 Socket 27 10WOP27 Pin 27 10
Rural
Adjustable Gudgeons - Weld On
Code GateAWG100 25NB
WELD ON FITTINGS CATCHES AND LATCHES
Gudgeon - Weld On
Code Suit CtnRGWS25G 25NB 50
Double Gate Ring Catch
Code Suit CtnDGCL25 25NB 15DGCL32 32NB 10
Timber Post Gate Catch
Code Size CtnCAC1 ø12 40
CAC2 ø16 20
Steel Post Gate Catch
Code CtnCAC4 20
Bow Latch - Galvanised
Code Suit CtnKSGB 25 - 32NB 10
Strap Hinge - Hinge
Code Suit CtnRGWS25 25NB 50
Socket
Pin
Double Gate Hook Catch
Code Suit CtnKDGH25 25NB 10KDGH32 32NB 10
Code Suits CtnKDGBC25 25NB 5
Double Gate Catch
Code Suit CtnFDG25 25NB 20
Weld-On Ring Catch
Code
RWOKCAC4-2
Weld-on Hook Catch
Code
RWOLFGF1
Weld on Chain Plate - Suit 5mm & 6mm Chain
Code Ctn
SCP5MM 30
Code Suits CtnCAC22 25 - 32NB 5
Downee®
A Division ofRMD Industries Pty LtdABN 31 004 313 937
downee.com.au 35
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Effective July 2011
RuralCATCHES AND LATCHES STOCKYARD COMPONENTSScrew In and Weld-On Eyes - Zinc Plated
Code CtnSE12 30
Code CtnSE12W 30
Field Gate Fastener with chain - Galvanised
Code SizeFGF1 350mm chainFGP2 500mm chain
Code CtnFGS 100
Screw In
Weld-On
Drive in Staple
Code CtnFGF1S 350mm chain 30FGF2S 500mm chain 50
Pack - includes hook, chain & 2 staples
Code Striker bolt CtnSCJ-14 14ø 20SCJ-20 20ø 5SCLNZ 25ø ea
Slam Catch - Striker Plate - Zinc Plated
Code Suits CtnSP2Z SCJ-14 200
Code Suits CtnSP8Z/20 SCJ-20 10
Cattle Yard Pin - 16x100mm
Code CtnCYPG 30
Cattle Yard Cleat
Code CtnRAB7550U 60
Cattle Yard Half Cleat
Code CtnRAB7550 60
Cattle Yard Cleat and Pin Set - Zinc Plated
Code CtnCYCPP 20
• Includes: - CPYG - RAB7550U - RAB7550
Slam Catch - Zinc Plated
Effective July 2011
Downee®
A Division ofRMD Industries Pty Ltd
ABN 31 004 313 937 downee.com.au36
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICEALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
RuralFARM GATE PACKS FARM GATE PACKSGate Pack - 25NB Bolt Thru - Timber Post
Code Post Pipe CtnFGP753 300mm 25NB 5
Gate Pack - 25NB Bolt Thru - Timber Post
Code Post Pipe CtnFGP303 300mm 25NB 5FGP413 400mm 25NB 5
Gate Pack - 25NB Screw In - Timber Post
Code Pipe Ctn
FGP221 25NB 10
Gate Pack - 25NB - Timber Post
Code Post Pipe Ctn
FGP151 300mm 25NB 5
Gate Pack - 25NB - Timber Post
Code Pipe Ctn
FGP121 25NB 10
Gate Pack - 25NB Bolt Thru - Timber Post
Code Post Pipe CtnFGP351 300mm 25NBFGP431 400mm 25NB
Gate Pack - 25NB Bolt on
Code Pipe CtnFGP523 25NB 10
Gate Pack - 25NB Weld-On
Code Pipe CtnFGP886 25NB 10
Gate Pack - 25NB Adjustable Weld-On
Code Pipe CtnFGP986 25NB 10
Gate Pack - 25NB Angle Post
Code Pipe CtnFGP664 25NB 10
Downee®
A Division ofRMD Industries Pty LtdABN 31 004 313 937
downee.com.au 37
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Effective July 2011
Angle Bracket - Galvanised
Code Size HolesFA100 106x65x52x3mm ø13FA150 145x50x50x3mm ø13FA200 195x65x65x3mm ø13
Building Hardware
Heavy Duty Joist Strap
Steel Post Inner Brackets - Galvanised
Code Size HolesFPS50 45x42x44.5x3mm ø10FPS65 60x60x65x3mm ø10FPS90 90x90x3mm ø10
Threaded Rod - Galvanised
Code Size BundleCRM103 ø10mmx3m 10
CRM123 ø12mmx3m 10
CRM163 ø16mmx3m 10
CRM203 ø20mmx3m 10
Stair Tread Bracket - Galvanised
Code Finish STAIRB BlackSTAIRG Galvabond
Hanger bracket
Code Description HB4590 45x90mmHB45140 45x140mmHB45180 45x180mmHB50120 50x120mmHB50180 50x180mm
Code Description HDJL 31mm x 170mm (left)
Unibracket
Code Size UN100 100mm
Triple Fix
Code Size TGR Pre Bent RightTGL Pre Bent Left
MISC. HARDWARE MISC. HARDWARE
Code Size HolesF0228 40x40x40x3mm ø6F0229 50x50x40x3mm ø6F0230 75x75x40x3mm ø6F0232 50x50x40x5mm ø6
Code Size HolesF0212 40x40x40x5mm ø10F0213 50x50x50x5mm ø10F0201 50x50x50x5mm ø12
Angle Brackets - Zinc Plated
Code Size HolesL100X75 100x75x19x4mm ø7
Pergola Angle
Code Size PBA 88x63x36x1.6mm
Code Description
HT Holistrap Tensioner
Punched Holistrap/Builders Strap
Code Description HS30/30 30mm x 30m x 0.8mmHS30/HD30 30mm x 30m x 1.0mmHS30/HD50 30mm x 50m x 1.0mm
Blade Stirrup - Galvanised - 3mm Steel - 250 shaft
Code Description BOPS/90 90mmGBPS/90 90mm
Half Stirrup - Galvanised - 3mm Steel - 250mm Shaft
Code ShaftPPS/125 128mmPPS/200 200mm
Full Stirrup - Galvanised - 3mm Steel - 320mm Shaft
Code Shaft Stirrup WidthFS65/90 65mm 90mmFS200/90 200mm 90mmFS250/90 250mm 90mmFS300/90 300mm 90mm
Half Stirrup - Galvanised - 3mm Steel - 250mm Shaft
Code Shaft Stirrup WidthHSPS/65 65mm 90mmHSPS/200 200mm 90mmHSPS/250 250mm 90mmHSPS/300 300mm 90mm
Pallet Feet - Square
Code Size Finish ctn PF130SG 132x132x43 Gal 20PF130SB 132x132x43 Black 20
Effective July 2011
Downee®
A Division ofRMD Industries Pty Ltd
ABN 31 004 313 937 downee.com.au38
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICEALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Hexagonal Head Type 17 Timber - Class 4 - 12 Guage
Code Length CtnT17HC41225 25 1000T17HC41250 50 1000
Bugle Batten Type 17 Timber - Galvanised - Class 3 - 14 Guage
Code Length CtnT17BBC314075 75 1000T17BBC314100 100 500
IRIUS Anti Tamper Metal Screw, Galvanised Class 4
Code Gauge Thread length CtnSD8/8 5.5mm 8mm 250SD14/12 5.5mm 12mm 250
Code DescriptionE420 Irius Drive Setting Tool
FASTENERS & PAINTS FASTENERS & PAINTSCup Head Bolts & Nuts - Galvanised
Code Size Ctn
M10x25-5 M10x25 50M10x40-5 M10x40 50M10x60-5 M10x60 50M10x70-5 M10x70 50M10x80-5 M10x80 50M10x90-5 M10x90 50
Bolt Anchors - Zinc Plated
Code Size Ctn
HS1050 M10x50 50HS1060 M10x60 50HS1075 M10x75 50HS1095 M10x95 50HS10120 M10x120 50HS1260 M12x60 50
Bolt Anchors - Galvanised
Code Size Ctn
HS1050G M10x50 50HS1095G M10x95 50HS12100G M12x100 50
Mushroom Head Spike - Zinc Plated
Code Size CtnMH656MM 6.5x38 100MH6519MM 6.5x50 100MH6532MM 6.5x63 100
Nail-In Anchor
Code Size CtnMPA6532 6.5x32 100MPA6550 6.5x50 100
Hexagonal Head Metal Screws - Galvanised - Class 3
Code Gauge-TPIxLength Ctn
TEKM101616 10-16x16 1000TEKM101616-C* 10-16x16 1000TEKM121420 12-14x20 500TEKM121420-C* 12-14x20 500TEKM141025 14-10x25 1000
• *Coloured screws available in standard colourbond range.
Irius Drive Setting Tool
Touch Up Paints
Code Size CtnTUP 150g 12
• Available in a full colourbond range
Specialty Paints
Code Description Ctn
CGS375 Cold Galvanised 375g 12
EEP300 Epoxy Etch Primer 300g 12
WCCSZ400 Zinc Gal Spray 2 in 1 400g 24
Dome Plugs - Plastic
Code Hole CtnDPB12 ø12mm 100DPB16 ø16mm 100DPB19 ø19mm 100DPB22 ø22mm 100DPB25 ø25mm 100
Fasteners & Paints
Downee®
A Division ofRMD Industries Pty LtdABN 31 004 313 937
downee.com.au 39
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Effective July 2011
Easyshade - Details
EASYSHADE MOTORISED FOLDING ARM AWNINGS
Shading Systems
SQUARE BAR phosphate galvanized and powder-coated steel square bar 40x40x1.5 cm
TUBE 70 mm diameter galvanized steel
ARMS extruded aluminium epoxy-coated, internal spring assembly
EXTENSION PROFILE extruded aluminium, end caps included
FABRIC OPTIONS acrylic fabric - recommended for the harsh Australian climate. Colours available as per SwatchBook
DRIVE UNIT tubular motor (240V/50Hz) with built in control unit. Back-up manual crank handle included
CONTROL OPTIONS wireless stylish table-top unit or wall plate, 3 channels (open, stop, close)
OPTIONAL ACCESSORY
solar powered wireless wind-sun sensor that detects the weather conditions and automatically controls awning movement.
LOW MAINTENANCEfor regular care and maintenance, excessive dirt should be washed from the fabric using a soft brush, spray with warm water, (not exceeding 40º) and air-dry
WARRANTY 5 year warranty on all components (fabric, structure, motor)
Ceiling installation240 mm
220
mm
Wall installation
Wind-sun sensor
Easyshade - Installation Options
Code width projection
BONDI from 2.4 m to max 2.9 m max 1.9 m
WHITSUNDAY from 3 m to max 3.9 m max 2.9 m
KAKADU from 4 m to max 5 m max 3.25 m
• Above RRP inclusive of one remote. Please refer to the bellow image for sizes.
max
pro
jecti
on m
max width m
4 5
2.9
3.25
2.4
1.9
BONDIWHITSUNDAY KAKADU
2.4 3 3.5 4.5
2.9
Projection data presented here are valid with the standard installation angle of 15º.
Installation angle can vary between 15º and 80º to accommodate specific needs.
As awning projection will vary according to the angle, please contact Downee tech support (1800 241 733) for more information or for specific applications.
Available in: ͳ white ͳ neutral ͳ seawater ͳ aluminium ͳ graphite ͳ black
Available in: ͳ white ͳ neutral ͳ orange
Squared wall plate
Table shockproof holder
Easyshade - Wireless control optionsEasyshade - Features
Mounting options
Code
Roof Truss
240 mm
220
mm
ANGLE
PROJECTION
15˚
80˚
Effective July 2011
Downee®
A Division ofRMD Industries Pty Ltd
ABN 31 004 313 937 downee.com.au40
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICEALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Light Duty
Safety Gate
Code CtnDPH100 20
Medium Duty
Code Rating CtnDPH200 20
DPHGGK Glass kit, inc. back plate and fasteners for DPH200
DPHGKSGlass kit, inc back plates and fasteners for DPH200 and Side Pull
Code CtnDPH210 20
LATCHES HINGES
Plain
Code CtnDPH110 20
Self Closing
Code CtnDPH120 20
Self Closing, Adjustable Tension
Top Pull Latch - Lockable
Code CtnDPL100 10
Vertical Pull Latch - Lockable
Code CtnDPL500 10
Adjustable Tension, with allignment legs
DPL100 + DPH110
Top Pull Light Gate Kit
Code CtnDPK110 5 ea
Code CtnDPK120 5 ea
Adjustable Tension
DPL100 + DPH120
Top Pull Medium Gate KitDPL100 + DPH200Code CtnDPK200 5 ea
Code CtnDPK210 Handle 5 ea
DPL100 + DPH210
Code CtnDPH250 10
HandleSafety Cap for Medium Duty Hinge
Code CtnDPH230 5
Code CtnDPH240 5
Adjustable Tension, Adjustable Round Post Legs
Adjustable Tension, Adjustable Wide Leaf
Adjustable Tension, Wide LeafCode CtnDPH220 5
Code CtnDPH300 50
Side Pull
Code CtnDPS100 ea
Downee®
A Division ofRMD Industries Pty LtdABN 31 004 313 937
downee.com.au 41
© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS
Effective July 2011
Notes: