price schedule name of work : execution of ht/lt lines

1
8 Mtr. Long 200 Kgs. P.C.C. Pole with R.C.C. Base Plate
/Pad in earth including excavation,refilling and ramming etc.
as required ( 1/6th length of the pole to be embeded in
earth), including carrying of the materials from Dhalai factory
stack yard to work site by mechanical transport/hand
cart/manual carrying including loading, unloading and
stacking as required, as per direction of Engg-In-Charge.
Nos. 98
8 Mtr. Long S.T. Pole of Designation 410SP-15(IS
2713,PtI,II,III,1980) with base plate direct in earth including
excavation, refilling and ramming etc, as required (1/6th
length of the pole to be embeded in earth ) and grouting with
CC of ratio 1:2:4 (1 Cement, 2 River Sand and 4 jhamabrick
aggregate of 20 mm nominal size) including supply of
cement,aggregate complete with excavation, refilling of
earth, ramming alongwith centering and shuttering as
required @ 0.273 Cum per S.T. Pole as per TSECL
specification )etc. and applying paints with ready mixed
primer (2 or more Coats ) and almunium paints of approved
quality to give an even shade etc, including carrying of the
materials from Dhalai RE-DDUGJY Store yard to work site
by mechanical transport/hand cart/manual carrying including
loading, unloading and stacking as required, as per direction
of Engg-In-Charge.
Nos. 90
Stringing & sagging of 1.1 K.V. L.T. AB Cable on P.C.C.
pole average span of 25 m to 40 m with fixing of Nylon
Cable tie to be tied every 2 mtr interval of AB Cable with
fixing of End caps at all open ends of AB Cable -
1X25+1X16+1x25 SQMM ( insulated messanger) AB Cable,
including carrying of the materials from Dhalai RE-DDUGJY
Store yard to work site by mechanical transport/hand
KM 7
PRICE SCHEDULE Name of Work : Execution of HT/LT Lines, installation of Distribution Sub Station and providing BPL Service connection at Damburnagar Block in Dhalai District under RE-DDUGJY Scheme. A. ERECTION CHARGE FOR DRAWAL OF LT AB CABLE (1X25+1X16+1x25 SQMM) Erection of Materials Including Carrying.
Signature of Contractor Page 65
4
Erection of anchor Clamp suitable for AB Cable of 25/16
sq.mm. insulated Massenger , including errection of G.I.
Pole clamp, G.I. Flat type Eye Hook, including carrying of
the materials from Dhalai RE-DDUGJY Store yard to work
site by mechanical transport/hand cart/manual carrying
including loading, unloading and stacking as required, as per
direction of Engg-In-Charge.
Massenger, including errection of G.I. Pole clamp, G.I. Flat
type Eye Hook, including carrying of the materials from
Dhalai RE-DDUGJY Store yard to work site by mechanical
transport/hand cart/manual carrying including loading,
unloading and stacking as required, as per direction of Engg-
In-Charge.
Distribution Boxes including connection with AB Cable,
Nos. 900
Connection including Connection with AB Cable, including
carrying of the materials from Dhalai RE-DDUGJY Store
yard to work site by mechanical transport/hand cart/manual
carrying including loading, unloading and stacking as
required, as per direction of Engg-In-Charge.
Nos. 188
8
Erection of distribution box on pole by 2 Nos Steel strap &
buckles / G.I. Clamp, including carrying of the materials from
In-Charge.
for Straight through joints, including carrying of the materials
from Dhalai RE-DDUGJY Store yard to work site by
mechanical transport/hand cart/manual carrying including
of Engg-In-Charge.
Nos. 23
10
16/50/70/35mm L.T. Power cables (1 set=4 Nos.), including
Nos. 15
screw thimble guy insulator as per IS specification including
fastened with hot dip (heavy duty galvanised stranded wire
of size 7/2.50mm alongwith stay clamps ,Nuts & bolts etc. as
required and grounding stay set with CC of ratio 1:2:4 (1
Cement,2 Riversand 4 jhamabrick aggregate of 20mm
nominal size )i/c supply of cement ,sand and brick aggregate
complete with excavation , refilling of earth ramming
alongwith centering and shuttering as required (@
0.119Cu.m per stay set as per TSECL specification,
Nos. 60
12 Pole numbering with Black Colour on yelow shade as
required digit as per direction of Engg-In-Charge. Nos. 188
13
Supply of Pole Clamp (50x8 mm) on existing pole with MS
Clamp and Nuts & bolts (suitable for Eye Hook) . Make : 3-
M, Axis Electrical Componants (I) Pvt. Ltd. , Raychem RPG.
Nos. 188
Supply of Galvanised Steel made Eye Hook with Hot dip
Galvanised Nuts & bolts (suitable for reqired Cable size).
Make : 3-M, Axis Electrical Componants (I) Pvt. Ltd. ,
Raychem RPG.
Nos. 188
SL NO.
Rs. Amount
in Rs.
1
8 Mtr. Long 200 Kgs PCC pole with RCC Base plate/pad
in earth including excavation, refilling and ramming etc. as
required (1/6th length of the pole to be embedded in
earth),including carrying of the materials from factory stack
yard of Dhalai district to work site by mechanical
unloading and stacking as required
214 Nos.
Total B. ERECTION CHARGE FOR CONSTRUCTION OF 1 PHASE - 2 WIRE L.T . LINE ON 8 Mtr. PCC/S.T. POLE WITH ACSR (6/1/2.59 MM). Erection of Materials Including Carrying.
2
8 M long Steel Tubular poles of Designation 410 SP 15 (IS
2713, Pt I, II, III 1980) with base plate direct in earth
including excavation, refilling and ramming etc. as required
(1/6th length of the pole to be embedded in earth) and
grouting with CC of ratio 1:2:4 (1 cement : 2 river sand : 4
jhama brick aggregate of 20 mm. nominal size) i/c supply of
cement, sand and brick aggregate complete with excavation,
refilling of earth, ramming alongwith centering and shuttering
as required (@ 0.273 Cum per Steel Tubular Pole as per
TSECL specification ) etc. and applying paints with ready
mixed primer (two or more coats) and alluminium paint of
approved quality to give an even shade etc. as
required,including carrying of the materials from Dhalai RE-
DDUGJY Store yard to work site by mechanical
unloading and stacking as required, as per direction of Eng-
In-Charge.
stranded wire of size 7/2.50 mm. alongwith stay clamps,
Nuts & Bolts etc. as required and Grouting of stay set with
CC of ratio 1 :2:4 (1 cement: 2 river sand: 4 jhama brick
aggregate of 20 mm. nominal size) i/c supply of cement,
sand and brick aggregate complete with excavation, refilling
of earth, ramming alongwith centering and shuttering as
required ( @ 0.119 Cum per stay set as per TSECL
specification). including carrying of the materials from Dhalai
RE-DDUGJY Store yard to work site by mechanical
In-Charge.
sleeves, binding materials etc as required as per technical
specification, approved drawings and scope of
work,including carrying of the materials from Dhalai RE-
In-Charge.
5
8 SWG GI Wire for continuous earthing of L.T. Line, as per
technical specification, approved drawings and scope of
work including craddle gaurding with fitting, fixing by reel
insulator and including carrying of the materials from Dhalai
In-Charge.
Erection of anti climbing devices viz barbed wires on pole
structures in helical form(1.5kg per pole), including carrying
of the materials from Dhalai RE-DDUGJY Store yard to work
direction of Eng-In-Charge.
Erection of porcelein shackle insulator for LT system with GI
U Clamps and required assorted nuts and bolts, washers
etc. including carrying of the materials from Dhalai RE-
In-Charge.
8
Supply and Erection of 40 mm dia., 2500 mm long GI pipe
earth electrode with test link, RCC pit, RCC cover, placed
on GI frame, Charcoal, Salt and other accessories complete
as per technical specifications for LT Overhead line's every
5th pole earthing and line structure earthing as per approved
drawings, specification and scope of work as per direction of
Eng-In-Charge.
including fastened with galvanised Clamps and Nuts & Bolts
etc. as required. Including carrying of the materials from
In-Charge.
L.T Danger Plate(57/1988), on single/double pole structure
at a height of 4mtr from the GL. Including carrying of the
of Eng-In-Charge.
411 No.
required digit as per direction of Engg-In-Charge. 411 Nos.
12
Supply of Nuts & Bolts including washer as reqired Properly
galvanised as per I.S for Erection of LT 1-Ph 2 Wire Line on
PCC & Steel Pole
SL NO.
Rs. Amount
in Rs.
1
8 Mtr. Long 200 Kgs PCC pole with RCC Base plate/pad
in earth including excavation, refilling and ramming etc. as
required (1/6th length of the pole to be embedded in
earth),including carrying of the materials from factory stack
yard of Dhalai district to work site by mechanical
unloading and stacking as required
263 Nos.
2
approved quality to give an even shade etc. as required
stacking as required, as per direction of Eng-In-Charge.
243 Nos.
Total
C. ERECTION CHARGE FOR CONSTRUCTION OF 3-PHASE -4-WIRE ON 8 Mtr. PCC/ S.T. POLE WITH ACSR CONDUCTOR (6/1/2.59MM). Erection of Materials Including Carrying.
3
specification), including carrying of the materials from Dhalai
In-Charge.
specification, approved drawings and scope of work,
81 KM
5
8 SWG GI Wire for continuous earthing of L.T. Line, as per
work including craddle gaurding with fitting, fixing by reel
insulator including carrying of the materials from Dhalai RE-
In-Charge.
Erection of porcelein shackle insulator for LT system with GI
U Clamps and required assorted nuts and bolts, washers
etc. including carrying of the materials from Dhalai RE-
In-Charge.
8
as per technical specifications for LT Overhead line's every
5th pole earthing and line structure earthing as per approved
drawings, specification and scope of work as per direction of
Eng-In-Charge.
etc. as required. including carrying of the materials from
In-Charge.
L.T Danger Plate(57/1988), on single/double pole structure
at a height of 4mtr from the GL.including carrying of the
of Eng-In-Charge.
506 Nos.
required digit as per direction of Engg-In-Charge. 506 Nos.
12
galvanised as per I.S for Erection of LT 1-Ph 2 Wire Line on
PCC & Steel Pole
SL No.
Description of materials Quantity Unit Rate (in Rs.) Amount (in
Rs.)
1
Erection of 9 Mtr PCC pole with RCC Base plate/pad,
including carrying of the materials from Dhalai factory stack
required, as per direction of Eng-In-Charge.
1146 Nos.
Total
D. ERECTION CHARGE FOR 3 PHASE 11KV LINE ON P.C.C. & STEEL POLE WITH ACSR WEASEL AND RABBIT CONDUCTOR. Erection Charge
2
9 M long Steel Tubular poles with welded steel base plate of
Designation 540 SP 52 (IS 2713, Pt I, II, III 1980), with base
plate direct in earth including excavation, refilling and
ramming etc. as required (1/6th length of the pole to be
embedded in earth) and grouting with CC of ratio 1:2:4 (1
cement : 2 river sand : 4 jhama brick aggregate of 20 mm.
nominal size) i/c supply of cement, sand and brick aggregate
complete with excavation, refilling of earth, ramming
alongwith centering and shuttering as required (@ 0.273
Cum per Steel Tubular Pole as per TSECL specification )
etc. and applying paints with ready mixed primer (two or
more coats) and alluminium paint of approved quality to give
an even shade etc. as required including carrying of the
of Eng-In-Charge.
472 Nos.
Erection of Cross arms made of 100 x 50 x 50 x 6 mm M.S.
Channel i/c. fastened with galvanised clamps and N&B etc.
as required duly galvanised as per relevant I.S. Including
required, as per direction of Eng-In-Charge. (a) Single pole top bracket 0.3 mtr. Long 943 Nos.
b) Double pole cross-arm 2.20 mtr. Long 337 Nos.
4
V-cross-arm made of 75x40x40x6 mm Ms channel duly
galvanised as per relevant I.S.i/c. fastened with galvanised
clamps and N&B etc. as required including carrying of the
of Eng-In-Charge.
943 Nos.
I.S.i/c. fastened with galvanised clamps and N&B etc. as
required Including carrying of the materials from Dhalai RE-
In-Charge.
6
with galvanised clamps and N&B etc. as required Including
404 Nos.
Double Pole Cross bracing made of 65 x 65 x 6 mm M.S.
Angle duly galvanised as per relevant I.S.i/c. fastened with
galvanised clamps and N&B etc. as required Including
required, as per direction of Eng-In-Charge. a) 1.8 mtr long for horizontal bracing 674 Nos.
(b) 3.2 mtr long for cross bracing 674 Nos.
8
In-Charge.
11 KV 45 KN Polimeric Disc Insulator with hardware fittings,
2223 Set
of Eng-In-Charge.
3706 Set
11
Jointing sleeves, binding materials etc as required as per
work, including carrying of the materials from Dhalai RE-
In-Charge.
12
8 SWG GI Wire for cradel guard for road, pond, cherra,
river and house etc of 11 KV Line, as per technical
68 KM
13
as per technical specifications for line structure earthing as
per approved drawings, specification and scope of work as
per direction of Eng-In-Charge.
approved drawings and scope of work for single pole,
876 Nos.
height of 4mtr from the GL.including carrying of the materials
of Eng-In-Charge.
1213 Nos.
17
In-Charge. (for Weasel & Rabbit conductor)
1010 Nos.
of Eng-In-Charge.
10376 Nos.
galvanised as per I.S for Erection of 11 KV Line through
weasel conductor (6/1/2.59 mm) on PCC & Steel Pole
2021 Kg
SL No.
Rs.)
1
approved quality to give an even shade etc, including
23 Nos.
In-Charge.
0
TOTAL E(1). ERECTION CHARGE FOR INSTALLATION OF 10 KVA 1-PHASE DISTRIBUTION SUB_ STATION ON STEEL POLE . Erection of Materials Including Carrying.
2
a) Distribution Transformer, 1- Phase 10 KVA, 11/0.250
KV 11 Nos.
cross-arm including duly galvanised as per relevant I.S.
etc. as required, including carrying of the materials from
In-Charge.
M.S. Channel of size 75x40x40x6mm for 2.8 mtr long cross-
arm including duly galvanised as per relevant I.S. including
fastened with galvanised Clamps and Nuts & Bolts etc. as
required, including carrying of the materials from Dhalai RE-
In-Charge.
M.S. angle of size 65x65x6mm for 2.8 mtr long cross-arm
including duly galvanised as per relevant I.S. including
In-Charge.
DT Base including fastened with galvanised Clamps and
Nuts & Bolts etc. as required, including carrying of the
of Eng-In-Charge.
23 Nos.
7
In-Charge.
of work, including carrying of the materials from Dhalai RE-
In-Charge.
a) 11KV Polymeric Disc insulator with Hardware fitting , 34 Set
b) 11KV Polymeric Pin insulator 34 Set
9
0.57 KM
10
structures including supply of barbed wires in helical
form(1.5kg per pole), including carrying of the materials from
In-Charge.
12
of Eng-In-Charge.
23 Nos.
13
11 KV, 200A, 3-ph, 3 Pin type, Vertical Mounting type, Gang
Operated, AB Switch along with Support Insulators, Base
Channel down Pipe, Arcing Horns etc. complete as as per
technical specifications, scope of works and approved
drawings, including carrying of the materials from Dhalai RE-
In-Charge.
14
11KV, 2 pole, HG fuse (D.O. Fuse Unit) set for 1-ph DTs as
per technical specification, approved drawings and scope of
In-Charge.
of work, including carrying of the materials from Dhalai RE-
In-Charge.
C' Type cross-arm for 3 wire LT Circuit (65x65x6mm M.S.
Angle), including fastened with galvanised Clamps and Nuts
& Bolts etc. as required,including carrying of the materials
of Engg-In-Charge.
23 Nos.
of Engg-In-Charge.
23 Nos.
18
assorted nuts and bolts, washers etc, including carrying of
Stranded, unarmoured cable for connection of transformer
LV bushing to Distribution Box as per Scope of work,
technical specification and approved drawings, including
required, as per direction of Engg-In-Charge. 1C X 35 sqm aluminium conductor cable for Single Phase
10 KVA Distribution Transformer 342 Mtr
20
LT cut(32Amps) out mechanism of single circuit rewireable
porcelain Kit-kat fuse unit of 500V grade as per relevant IS
specification to be fastened on wooden plank including
Supply & erection of wooden plank (preferably karai wood)
of size 12" X 10" X 1.5" for fixing of cut outs with Nuts &
bolts as required to be erected on the steel tubular/ PCC
pole as per direction of Engineer-in-charge and including
11 Nos.
46 Nos.
In-Charge.
required digit as per direction of Engg-In-Charge.
23 Nos.
galvanised as per I.S for installation of 10 KVA Distribution
Transformers
25 Supply of Bimetalic Lugs- 35Sq.mm 46 Nos.
26 Supply of 32Amps Cut out of 500V grade as per relevant IS
specification 11 Nos.
Rs.)
1
approved quality to give an even shade etc. as required as
per direction of Eng-In-Charge, including carrying of the
of Engg-In-Charge.
29 Nos.
In-Charge.
0
KV 15 Nos.
In-Charge.
44 Nos.
TOTAL E(2). ERECTION CHARGE FOR INSTALLATION OF 16KVA 1-PHASE DISTRIBUTION SUB_ STATION ON STEEL POLE . Erection of Materials Including Carrying.
2
4
In-Charge.
In-Charge.
of Engg-In-Charge.
29 Nos.
In-Charge.
Polymeric Insulators with hardware fittings, hardware etc as
required as per technical specification, approved drawings
and scope of work, including carrying of the materials from
In-Charge.
a) 11KV Polymeric Disc insulator with Hardware fitting 44 Set
b) 11KV Plymerci Pin insulator 44 Set
9
0.74 KM
10
of Engg-In-Charge.
29 Nos.
13
In-Charge.
14
In-Charge.
DT as per technical specification, approved drawings and
scope of work, including carrying of the materials from
In-Charge.
Angle),including fastened with galvanised Clamps and Nuts
& Bolts etc. as required, including carrying of the materials
of Engg-In-Charge.
29 Nos.
of Engg-In-Charge.
29 Nos.
PVC insulated, PVC sheathed, Aluminium Conductor,
required, as per direction of Engg-In-Charge. 1C X 35 sqm aluminium conductor cable for Single Phase
16 KVA Distribution Transformer 442 Mtr
20
15 Set
59 Nos.
In-Charge.
29 Nos.
Transformers
25 Supply of Bimetalic Lugs- 35 Sq.mm 59 Nos.
26 Supply of 32 Amps. Cut out of 500V grade as per relevant
IS specification 15 Nos.
TOTAL
E(3). ERECTION CHARGE FOR INSTALLATION OF 25 KVA 3-PHASE DISTRIBUTION SUB_ STATION ON STEEL POLE .
Erection of Materials Including Carrying.
19
SL No.
Rs.)
1
of Engg-In-Charge.
36 Nos.
In-Charge. a) Distribution Transformer, 3- Phase 25 KVA, 11/0.250
KV 18 Nos.
In-Charge.
4
In-Charge.
In-Charge.
of Engg-In-Charge.
36 Nos.
In-Charge.
In-Charge.
0
9
0.9 KM
10
In-Charge.
of Engg-In-Charge.
36 Nos.
13
In-Charge.
14
In-Charge.
In-Charge.
Angle), including carrying of the materials from Dhalai RE-
In-Charge.
of Engg-In-Charge.
36 Nos.
assorted nuts and bolts, washers etc, including carrying of
required, as per direction of Engg-In-Charge. 1C X 70 sqm aluminium conductor cable for 3- Phase 25
KVA Distribution Transformer 1085 Mtr
20
109 Nos.
416 Nos.
In-Charge.
36 Nos.
25 Supply of 63 Amps. Cut out of 500V grade as per relevant
Transformers
19
TOTAL
E(4). ERECTION CHARGE FOR INSTALLATION OF 63 KVA 3-PHASE DISTRIBUTION SUB_ STATION ON STEEL POLE . Erection of Materials Including Carrying.
SL No.
Rs.)
1
of Engg-In-Charge.
4 Nos.
In-Charge.
0
a) Distribution Transformer, 3- Phase 63 KVA, 11/0.4 KV 2 Nos.
3
etc. as required,including carrying of the materials from
In-Charge.
4
required ,including carrying of the materials from Dhalai RE-
In-Charge.
In-Charge.
of Engg-In-Charge.
4 Nos.
In-Charge.
In-Charge.
9
0.1 KM
10
In-Charge.
of Eng-In-Charge.
4 Nos.
13
In-Charge.
14
In-Charge.
In-Charge.
Angle), including carrying of the materials from Dhalai RE-
In-Charge.
of Engg-In-Charge.
4 Nos.
assorted nuts and bolts, washers etc.including carrying of
required, as per direction of Engg-In-Charge. 1C X 70 sqm aluminium conductor cable for 3- Phase 63
KVA Distribution Transformer 12 Mtr
20
rewireable porcelain Kit-kat fuse unit of 500V grade as per
relevant IS specification to be fastened on wooden plank
including Supply & erection of wooden plank (preferably
karai wood) of size 24" X 12" X 1.5" for fixing of cut outs with
Nuts & bolts as required to be erected on the steel tubular/
PCC pole as per direction of Engineer-in-charge and
12 Nos.
46 Nos.
In-Charge.
4 Nos.
25 Supply of 100Amps. Cut out of 500V grade as per relevant
galvanised as per I.S for installation of 2 Nos of 63 KVA
Distribution Transformers
30 Kg
SL No.
(Rs) Total (Rs)
1 Supply of WOODEN METER BOARD (14X12) inchs Nos 2576
2 Supply of WOODEN BOARD FOR SWITCH & LAMP
HOLDER (6X4) Inchs Nos 2576
3 Supply of 16 AMP ICDP MAIN SWITCH AS PER ISI Nos 2576
4 Supply of 5A PIANO SWITCH ISI Nos 2576
5 Supply of BATTEN HOLDER ISI Nos 2576
6 Supply of EARTHING BOLT OF SIZE M 10 x 50mm WITH
NUTS & BOLTS Nos 2576
7 Supply of PVC PIPE 20 mm DIA ISI Mtrs. 6440
8 Supply of PVC SADDLE Nos 10304
9 Supply of SINGLE CORE 1.5 sq.mm. COPPER CABLE Mtr. 12880
10 Supply of REEL INSULATOR Nos 103040
11 Supply of EARTH SPIKE (1.80 Mtr X20 mm) Nos 2576
12 Supply of 7 WATT PIN TYPE LED LAMP (710 LUMENS) Nos 2576
13 Supply of Screw of different sizes LS 2576
14
METER OF CLASS 1.0 ACCURACY ELECTRONIC
ENERGY METER ALONG WITH METER BOX AS PER TS
OF TSECL (TSECL Supply)
CORE ALUMINIUM CONDUCTOR (TSECL Supply)
Mtr 154560
16 Erection of 8 SWG GI WIRE FOR EARTHING (TSECL
Supply) KG 4637
18 Erection Price No. 2576 TOTAL
Damburnagar P S
PRICE SCHEDULE
Name of Work : Execution of HT/LT Lines, installation of Distribution Sub Station and providing BPL Service connection at Damburnagar Block in Dhalai District under RE-DDUGJY Scheme.
A. ERECTION CHARGE FOR DRAWAL OF LT AB CABLE (1X25+1X16+1x25 SQMM)
SL NO.
AMOUNT
1
8 Mtr. Long 200 Kgs. P.C.C. Pole with R.C.C. Base Plate /Pad in earth including excavation,refilling and ramming etc. as required ( 1/6th length of the pole to be embeded in earth), including carrying of the materials from Dhalai factory stack yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Engg-In-Charge.
Nos.
98
2
8 Mtr. Long S.T. Pole of Designation 410SP-15(IS 2713,PtI,II,III,1980) with base plate direct in earth including excavation, refilling and ramming etc, as required (1/6th length of the pole to be embeded in earth ) and grouting with CC of ratio 1:2:4 (1 Cement, 2 River Sand and 4 jhamabrick aggregate of 20 mm nominal size) including supply of cement,aggregate complete with excavation, refilling of earth, ramming alongwith centering and shuttering as required @ 0.273 Cum per S.T. Pole as per TSECL specification )etc. and applying paints with ready mixed primer (2 or more Coats ) and almunium paints of approved quality to give an even shade etc, including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Engg-In-Charge.
Nos.
90
3
Stringing & sagging of 1.1 K.V. L.T. AB Cable on P.C.C. pole average span of 25 m to 40 m with fixing of Nylon Cable tie to be tied every 2 mtr interval of AB Cable with fixing of End caps at all open ends of AB Cable -1X25+1X16+1x25 SQMM ( insulated messanger) AB Cable, including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Engg-In-Charge.
KM
7
4
Erection of anchor Clamp suitable for AB Cable of 25/16 sq.mm. insulated Massenger , including errection of G.I. Pole clamp, G.I. Flat type Eye Hook, including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Engg-In-Charge.
Nos.
113
5
Erection of Suspension clamp suitable for.insulated Massenger, including errection of G.I. Pole clamp, G.I. Flat type Eye Hook, including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Engg-In-Charge.
Nos.
188
6
Erection of insulating Piercing connectors for connection of Distribution Boxes including connection with AB Cable, including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Engg-In-Charge.
Nos.
900
7
Erection of Insulating Piercing Connectors for ABC tee Connection including Connection with AB Cable, including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Engg-In-Charge.
Nos.
188
8
Erection of distribution box on pole by 2 Nos Steel strap & buckles / G.I. Clamp, including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Engg-In-Charge.
Nos.
188
9
Erection of preinstalled Water proof crymping type sleeves for Straight through joints, including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Engg-In-Charge.
Nos.
23
10
Erection of Bimetalic Crymping Type Waterproof lug for 16/50/70/35mm L.T. Power cables (1 set=4 Nos.), including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Engg-In-Charge.
Nos.
15
11
Erection of L.T.Stay set completewith rod, plate, straining screw thimble guy insulator as per IS specification including fastened with hot dip (heavy duty galvanised stranded wire of size 7/2.50mm alongwith stay clamps ,Nuts & bolts etc. as required and grounding stay set with CC of ratio 1:2:4 (1 Cement,2 Riversand 4 jhamabrick aggregate of 20mm nominal size )i/c supply of cement ,sand and brick aggregate complete with excavation , refilling of earth ramming alongwith centering and shuttering as required (@ 0.119Cu.m per stay set as per TSECL specification, including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Engg-In-Charge.
Nos.
60
12
Pole numbering with Black Colour on yelow shade as required digit as per direction of Engg-In-Charge.
Nos.
188
13
Supply of Pole Clamp (50x8 mm) on existing pole with MS Clamp and Nuts & bolts (suitable for Eye Hook) . Make : 3-M, Axis Electrical Componants (I) Pvt. Ltd. , Raychem RPG.
Nos.
188
14
Supply of Galvanised Steel made Eye Hook with Hot dip Galvanised Nuts & bolts (suitable for reqired Cable size). Make : 3-M, Axis Electrical Componants (I) Pvt. Ltd. , Raychem RPG.
Nos.
188
Total
B. ERECTION CHARGE FOR CONSTRUCTION OF 1 PHASE - 2 WIRE L.T . LINE ON 8 Mtr. PCC/S.T. POLE WITH ACSR (6/1/2.59 MM).
SL NO.
1
8 Mtr. Long 200 Kgs PCC pole with RCC Base plate/pad in earth including excavation, refilling and ramming etc. as required (1/6th length of the pole to be embedded in earth),including carrying of the materials from factory stack yard of Dhalai district to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required
214
Nos.
2
8 M long Steel Tubular poles of Designation 410 SP 15 (IS 2713, Pt I, II, III 1980) with base plate direct in earth including excavation, refilling and ramming etc. as required (1/6th length of the pole to be embedded in earth) and grouting with CC of ratio 1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of cement, sand and brick aggregate complete with excavation, refilling of earth, ramming alongwith centering and shuttering as required (@ 0.273 Cum per Steel Tubular Pole as per TSECL specification ) etc. and applying paints with ready mixed primer (two or more coats) and alluminium paint of approved quality to give an even shade etc. as required,including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
197
Nos.
3
Galvanised Stay set complete with rod, plate , straining screw, thimble, guy insulator as per IS specification including fastened with hot dip (heavy duty) galvanized stranded wire of size 7/2.50 mm. alongwith stay clamps, Nuts & Bolts etc. as required and Grouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 river sand: 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of cement, sand and brick aggregate complete with excavation, refilling of earth, ramming alongwith centering and shuttering as required ( @ 0.119 Cum per stay set as per TSECL specification). including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
197
Set
4
ACSR Conductors (6/1/2.59mm) Weasel with Jointing sleeves, binding materials etc as required as per technical specification, approved drawings and scope of work,including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
33
KM
5
8 SWG GI Wire for continuous earthing of L.T. Line, as per technical specification, approved drawings and scope of work including craddle gaurding with fitting, fixing by reel insulator and including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
2136
KG
6
Erection of anti climbing devices viz barbed wires on pole structures in helical form(1.5kg per pole), including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
411
NO.
7
Erection of porcelein shackle insulator for LT system with GI U Clamps and required assorted nuts and bolts, washers etc. including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
821
Nos.
8
Supply and Erection of 40 mm dia., 2500 mm long GI pipe earth electrode with test link, RCC pit, RCC cover, placed on GI frame, Charcoal, Salt and other accessories complete as per technical specifications for LT Overhead line's every 5th pole earthing and line structure earthing as per approved drawings, specification and scope of work as per direction of Eng-In-Charge.
82
Set
9
C' Type cross-arm for 3 wire (65x65x6mm M.S. Angle) including fastened with galvanised Clamps and Nuts & Bolts etc. as required. Including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
247
Nos.
10
L.T Danger Plate(57/1988), on single/double pole structure at a height of 4mtr from the GL. Including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
411
No.
11
411
Nos.
12
Supply of Nuts & Bolts including washer as reqired Properly galvanised as per I.S for Erection of LT 1-Ph 2 Wire Line on PCC & Steel Pole
657
Kg
13
821
Nos.
Total
C. ERECTION CHARGE FOR CONSTRUCTION OF 3-PHASE -4-WIRE ON 8 Mtr. PCC/ S.T. POLE WITH ACSR CONDUCTOR (6/1/2.59MM).
SL NO.
1
8 Mtr. Long 200 Kgs PCC pole with RCC Base plate/pad in earth including excavation, refilling and ramming etc. as required (1/6th length of the pole to be embedded in earth),including carrying of the materials from factory stack yard of Dhalai district to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required
263
Nos.
2
8 M long Steel Tubular poles of Designation 410 SP 15 (IS 2713, Pt I, II, III 1980) with base plate direct in earth including excavation, refilling and ramming etc. as required (1/6th length of the pole to be embedded in earth) and grouting with CC of ratio 1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of cement, sand and brick aggregate complete with excavation, refilling of earth, ramming alongwith centering and shuttering as required (@ 0.273 Cum per Steel Tubular Pole as per TSECL specification ) etc. and applying paints with ready mixed primer (two or more coats) and alluminium paint of approved quality to give an even shade etc. as required including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
243
Nos.
3
Galvanised Stay set complete with rod, plate , straining screw, thimble, guy insulator as per IS specification including fastened with hot dip (heavy duty) galvanized stranded wire of size 7/2.50 mm. alongwith stay clamps, Nuts & Bolts etc. as required and Grouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 river sand: 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of cement, sand and brick aggregate complete with excavation, refilling of earth, ramming alongwith centering and shuttering as required ( @ 0.119 Cum per stay set as per TSECL specification), including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
243
Set
4
ACSR Conductors (6/1/2.59mm) Weasel with Jointing sleeves, binding materials etc as required as per technical specification, approved drawings and scope of work, including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
81
KM
5
8 SWG GI Wire for continuous earthing of L.T. Line, as per technical specification, approved drawings and scope of work including craddle gaurding with fitting, fixing by reel insulator including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
2630
KG
6
506
Nos.
7
Erection of porcelein shackle insulator for LT system with GI U Clamps and required assorted nuts and bolts, washers etc. including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
2023
No.
8
Supply and Erection of 40 mm dia., 2500 mm long GI pipe earth electrode with test link, RCC pit, RCC cover, placed on GI frame, Charcoal, Salt and other accessories complete as per technical specifications for LT Overhead line's every 5th pole earthing and line structure earthing as per approved drawings, specification and scope of work as per direction of Eng-In-Charge.
101
Set
9
C' Type cross-arm for 3 wire (65x65x6mm M.S. Angle) including fastened with galvanised Clamps and Nuts & Bolts etc. as required. including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
304
Nos.
10
L.T Danger Plate(57/1988), on single/double pole structure at a height of 4mtr from the GL.including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
506
Nos.
11
506
Nos.
12
Supply of Nuts & Bolts including washer as reqired Properly galvanised as per I.S for Erection of LT 1-Ph 2 Wire Line on PCC & Steel Pole
1093
Kg
13
1012
Nos.
Total
D. ERECTION CHARGE FOR 3 PHASE 11KV LINE ON P.C.C. & STEEL POLE WITH ACSR WEASEL AND RABBIT CONDUCTOR.
Erection Charge
SL No.
1
Erection of 9 Mtr PCC pole with RCC Base plate/pad, including carrying of the materials from Dhalai factory stack yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
1146
Nos.
2
9 M long Steel Tubular poles with welded steel base plate of Designation 540 SP 52 (IS 2713, Pt I, II, III 1980), with base plate direct in earth including excavation, refilling and ramming etc. as required (1/6th length of the pole to be embedded in earth) and grouting with CC of ratio 1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of cement, sand and brick aggregate complete with excavation, refilling of earth, ramming alongwith centering and shuttering as required (@ 0.273 Cum per Steel Tubular Pole as per TSECL specification ) etc. and applying paints with ready mixed primer (two or more coats) and alluminium paint of approved quality to give an even shade etc. as required including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
472
Nos.
3
Erection of Cross arms made of 100 x 50 x 50 x 6 mm M.S. Channel i/c. fastened with galvanised clamps and N&B etc. as required duly galvanised as per relevant I.S. Including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
(a) Single pole top bracket 0.3 mtr. Long
943
Nos.
337
Nos.
4
V-cross-arm made of 75x40x40x6 mm Ms channel duly galvanised as per relevant I.S.i/c. fastened with galvanised clamps and N&B etc. as required including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
943
Nos.
5
Single Pole protective guard bracket 1.6mtr. Long by 65x65x6 mm M.S.Angle duly galvanised as per relevant I.S.i/c. fastened with galvanised clamps and N&B etc. as required Including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
876
Nos.
6
Double pole guard bracket, 2.5 mtr. Long by 65x65x6mm M.S. Angle duly galvanised as per relevant I.S.i/c. fastened with galvanised clamps and N&B etc. as required Including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
404
Nos.
7
Double Pole Cross bracing made of 65 x 65 x 6 mm M.S. Angle duly galvanised as per relevant I.S.i/c. fastened with galvanised clamps and N&B etc. as required Including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
a) 1.8 mtr long for horizontal bracing
674
Nos.
674
Nos.
8
Galvanised Stay set complete with rod, plate , straining screw, thimble, guy insulator as per IS specification including fastened with hot dip (heavy duty) galvanized stranded wire of size 7/2.50 mm. alongwith stay clamps, Nuts & Bolts etc. as required and Grouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 river sand: 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of cement, sand and brick aggregate complete with excavation, refilling of earth, ramming alongwith centering and shuttering as required ( @ 0.119 Cum per stay set as per TSECL specification), including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
943
Set
9
11 KV 45 KN Polimeric Disc Insulator with hardware fittings, including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
2223
Set
10
11KV Polimeric insulator, including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
3706
Set
11
ACSR Conductors (6/1/2.59mm) Weasel / Rabbit with Jointing sleeves, binding materials etc as required as per technical specification, approved drawings and scope of work, including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
202
KM
12
8 SWG GI Wire for cradel guard for road, pond, cherra, river and house etc of 11 KV Line, as per technical specification, approved drawings and scope of work, including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
68
KM
13
Supply and Erection of 40 mm dia., 2500 mm long GI pipe earth electrode with test link, RCC pit, RCC cover, placed on GI frame, Charcoal, Salt and other accessories complete as per technical specifications for line structure earthing as per approved drawings, specification and scope of work as per direction of Eng-In-Charge.
337
Set
14
Spike earthing 20mm dia as per technical specification, approved drawings and scope of work for single pole, including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
876
Nos.
15
1752
Nos.
16
Danger Plate(57/1988), on single/double pole structure at a height of 4mtr from the GL.including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge.
1213
Nos.
17
P.G.Clamps, including carrying of the materials from Dhalai RE-DDUGJY Store yard to work site by mechanical transport/hand cart/manual carrying including loading, unloading and stacking as required, as per direction of Eng-In-Charge. (for Weasel & Rabbit conductor)
1010
Nos.
18
Fixing of Cross bracing, including carrying of the materials from Dhalai RE-DDUGJY Store yard

price schedule name of work : execution of ht/lt lines

Documents