prices effective february 5, 2018 eames tables · prices effective february 5, ......
TRANSCRIPT
Z Eames® Tables Price Book (2/18) 1
Introduction page 2
Eames® Tables 3
Occasional Tables 5
Low Conference Tables 17
Conference Tables 46
Standing Height Tables 87
Power Modules 137
Outdoor Tables 148
Indices 179
By Name 179
By Number 181Appendices
20-Day or Less/Assigned Lead-Time Order Information
Stain-to-Match Program
For the latest materials information, refer to the Materials pages on HermanMiller.com.
Y Price Book
Prices effective February 5, 2018 Eames® Tables
5_Tables_Collection_naughtone_Master_Cover_Toc.qxd 12/29/2017 3:59 PM Page 33
34 Eames® Tables Price Book (2/18) HermanMiller
Introduction
General Information
This book is effective February 5, 2018, subject to change without
notice. Products may be purchased from authorized Herman Miller deal-
ers who will quote prices upon request. For more information
about our products and services or to see a list of dealers, visit
www.HermanMiller.com.
All prices are list prices. Additional services, such as planning
services, design, storage, and installation, are not included and must
be added to these prices when the additional services are requested.
Illustrations, specifications, and prices are based on the latest
information at the time of publication. The right is reserved to make
changes at any time without notice in prices, fabrics, finishes, materi-
als, specifications, and models, and also to discontinue models and fin-
ishes.
Dimensions shown in the drawings are engineering drawing dimen-
sions rounded up to the nearest 1/8". Product is shipped set
up or knocked down. Products that include “Shipped knocked down”
in the description require some assembly. If this statement does not
appear in the description, the product is shipped assembled.
Service problems are normally handled by a Herman Miller
authorized dealer. Where this cannot be accomplished on a local
level, service problems should be referred to the Customer Care
Representative for your region, Herman Miller, Inc., Zeeland, Michigan
49464.
20-Day or Less/Assigned Lead-Time Shipments
All products and options in this price book not designated by an
Assigned Program icon A will ship in 20 business days or less after
being acknowledged by Herman Miller.
Products and options designated by an A are on the assigned lead-
time program and may ship in 20 days, less than 20 days, or more than
20 days from order acknowledgement.
A Note on the Organization of This Book
There are a few signals that will help you understand the organization
of this book. Once you know them, you should be able to find your way
around easily.
Like a newspaper, this book is formatted with columns of text
and illustrations that run vertically.
Information wraps from one column to the next and continues for as
many pages as it needs to.
Black bars are clues.
A black bar at the top of a page signals the start of information about a
product.
This information is divided into two sections, each signaled by a
black bar. Product Information includes a description, additional notes,
and dimensional drawings. Specification Information, which always
begins at the top of a column, includes a series of steps. Each step rep-
resents a decision you need to make in order to complete your product
number. Steps must be followed sequentially. The number of pages
needed to complete information on a product varies; some will be com-
plete in one page; others may fill three or four pages. Just continue
going through the steps until you run into the next product, signaled by
the black bar at the top of the page.
Black tabs running along the outside edge of the page help you
locate what section you are in or what section you want to go to. You
can thumb forwards or backwards to find a section; tabs and text
appear on both sides of the page.
The additional pages in the back of the book include the appendices
and indices. They are signaled by a long black bar running along the
outside edge of the page.
The index is presented two ways.
The first index is in alphabetical order by product name. It can be help-
ful if you are new to the products and numbering scheme or if you are
looking for a type of product, such as work chair or round table.
The second index is by product number. It lists, in alphanumeric order,
the base product number, typically a five-digit number.
5_Tables_Collection_naughtone_Master_Cover_Toc.qxd 12/29/2017 3:59 PM Page 34
Eames® Tables
Tables
Outdoor Tables
HermanMiller Eames® Tables Price Book (2/18) 3
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 3
4 Eames® Tables Price Book (2/18) HermanMiller
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 4
Eames® Occasional Table, Round
Product Information
Description
This table has a laminate or veneer top with vinyl edge, a veneer top
and edge, a thin-profile HPL top with black edge, or a back-painted glass
top with modified bullnose edge. Table may be specified with cutouts to
accommodate simple power options (specified separately). Each table
has adjustable glides or casters. Shipped knocked down.
Notes
Tables have a 1-piece top and single column base.
Laminate and veneer tops are 7/8" thick.
Thin profile HPL tops are 1/2" thick.
Glass tops are back-painted, with a satin etch finish to reduce the
appearance of fingerprints. Tops are 1/2" thick.
30" and 36" diameter tables may only accommodate USB access. Single
center cutout (CC) grommet option must be specified. Grommet option
is a non-functional hole plug. For USB access, order round dual USB
charging unit (ET990.) separately.
42" and 48" diameter tables may accommodate power. Single center
cutout (CC) grommet option must be specified. Grommet provides
simple pass-through with wire management features and a hinged lid.
For power access, order round power module (ET991.) separately.
Santos palisander veneer is celebrated for its unique grain and color
variations. Similar products ordered in multiples or dissimilar products
ordered separately should be expected to have variation in both grain
and color characteristics; no two products will look exactly alike.
Dimensions
ET307!ET308!ET309!ET310!
HermanMiller Eames® Tables Price Book (2/18) 5
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 5
Specification Information
Step 1.
ETA
Step 2. Height
3 16" highA
Step 3. Diameter
07 30" diameterA
08 36" diameterA
09 42" diameterA
10 48" diameterA
Step 4. Base
For 30" diameter (07) or 36" diameter (08)
C contract baseA
U universal baseA
For 42" diameter (09) or 48" diameter (10)
C contract baseA
Step 5. Surface Material
C veneer top with vinyl edgeA
G back-painted glass topA
L laminate top with vinyl edgeA
M thin profile HPL top with black edgeA
W veneer top with veneer edgeA
Step 6. Grommets
CC single center cutoutA
NG no grommetA
Prices for Steps 1-6.
CC NG
ET307 C C $1055 1010
G $3860 3440
L $905 860
M $1650 1570
W $1185 1140
U C $1055 1010
G $3860 3440
L $905 860
M $1650 1570
W $1185 1140
CC NG
ET308 C C $1205 1160
G $4870 4460
L $1045 1000
M $2130 2050
W $1385 1340
U C $1205 1160
G $4870 4460
L $1045 1000
M $2130 2050
W $1385 1340
CC NG
ET309 C C $1690 1460
G $6320 5780
L $1500 1270
M $3470 3240
W $1870 1640
CC NG
ET310 C C $1830 1600
G $7700 7150
L $1630 1400
M $3550 3320
W $2000 1770
Step 7.
Top Finish
For back-painted glass top (G)
8Q folkstone greyA +$0
91 whiteA +$0
BK blackA +$0
WN warm grey neutralA +$0
Top Finish
For thin profile HPL top with black edge (M)
91 whiteA +$0
BK blackA +$0
G1 graphiteA +$0
Eam
es®
Tabl
es=
==
6 Eames® Tables Price Book (2/18) HermanMiller
Eames® Occasional Table, Roundcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 6
Top Finish
For laminate top with vinyl edge (L)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BKM black matteA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
HT inner toneA +$0
LT light toneA +$0
LU soft whiteA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
For veneer top with vinyl edge (C)
07 08 09 10
RA light ashA +$0 0 0 0
RK mahogany darkA +$0 0 0 0
RM mahoganyA +$0 0 0 0
For veneer top with vinyl edge (C)
07 08 09 10
2U light brown walnutA +$105 105 130 175
40 dark brown walnutA +$105 105 130 175
9N santos palisanderA +$380 380 720 839
A2 white ashA +$105 105 130 175
ED aged cherryA +$105 105 130 175
EK medium red walnutA +$105 105 130 175
EN ebonyA +$105 105 130 175
OU walnutA +$105 105 130 175
UL natural mapleA +$105 105 130 175
UX walnut on cherryA +$105 105 130 175
V2 beechA +$80 80 95 130
For veneer top with veneer edge (W)
07 08 09 10
RA light ashA +$0 0 0 0
RK mahogany darkA +$0 0 0 0
RM mahoganyA +$0 0 0 0
For veneer top with veneer edge (W)
07 08 09 10
2U light brown walnutA +$105 105 130 175
40 dark brown walnutA +$105 105 130 175
9N santos palisanderA +$380 380 720 839
A2 white ashA +$105 105 130 175
ED aged cherryA +$105 105 130 175
EK medium red walnutA +$105 105 130 175
EN ebonyA +$105 105 130 175
OU walnutA +$105 105 130 175
UL natural mapleA +$105 105 130 175
UX walnut on cherryA +$105 105 130 175
V2 beechA +$80 80 95 130
Step 8. Edge Finish
For veneer top with vinyl edge (C) or laminate top with vinyl edge (L)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Step 9. Grommet Finish
For 30" diameter (07) or 36" diameter (08) with single center cutout (CC)
PA polished aluminumA +$0
For 42" diameter (09) or 48" diameter (10) with single center cutout (CC)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 7
Eames® Occasional Table, Roundcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 7
Step 10. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 11. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 12. Casters/Glides
For veneer top with vinyl edge (C), laminate top with vinyl edge (L), thin
profile HPL top with black edge (M), or veneer top with veneer edge (W)
C castersA +$80
G glidesA +$0
For back-painted glass top (G)
G glidesA +$0
Eam
es®
Tabl
es=
==
8 Eames® Tables Price Book (2/18) HermanMiller
Eames® Occasional Table, Roundcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 8
Eames® Occasional Table, Square
Product Information
Description
This table has a laminate or veneer top with vinyl edge, a veneer top
and edge, a thin-profile HPL top with black edge, or a back-painted glass
top with modified bullnose edge. Table may be specified with cutouts to
accommodate simple power options (specified separately). Each table
has adjustable glides or casters. Shipped knocked down.
Notes
Tables have a 1-piece top and single column base.
Laminate and veneer tops are 7/8" thick.
Thin profile HPL tops are 1/2" thick.
Glass tops are back-painted, with a satin etch finish to reduce the
appearance of fingerprints. Tops are 1/2" thick.
30" and 36" tables may only accommodate USB access. Single center
cutout (CC) grommet option must be specified. Grommet option is a
non-functional hole plug. For USB access, order round dual USB
charging unit (ET990.) separately.
42" and 48" tables may accommodate power. Single center cutout (CC)
grommet option must be specified. Grommet provides simple pass-
through with wire management features and a hinged lid. For power
access, order round power module (ET991.) separately.
Santos palisander veneer is celebrated for its unique grain and color
variations. Similar products ordered in multiples or dissimilar products
ordered separately should be expected to have variation in both grain
and color characteristics; no two products will look exactly alike.
Dimensions
ET304!ET305!ET306!ET348!
HermanMiller Eames® Tables Price Book (2/18) 9
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 9
Specification Information
Step 1.
ETA
Step 2. Height
3 16" highA
Step 3. Depth/Width
04 30" deep x 30" wideA
05 36" deep x 36" wideA
06 42" deep x 42" wideA
48 48" deep x 48" wideA
Step 4. Base
For 30" deep x 30" wide (04) or 36" deep x 36" wide (05)
C contract baseA
U universal baseA
For 42" deep x 42" wide (06) or 48" deep x 48" wide (48)
C contract baseA
Step 5. Surface Material
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
M thin profile HPL top with black edgeA
G back-painted glass topA
Step 6. Grommets
NG no grommetA
CC single center cutoutA
Prices for Steps 1-6.
NG CC
ET304 C L $860 905
C $1010 1055
W $1140 1185
M $1570 1650
G $3440 3860
U L $860 905
C $1010 1055
W $1140 1185
M $1570 1650
G $3440 3860
NG CC
ET305 C L $1000 1045
C $1160 1205
W $1340 1385
M $2050 2130
G $4460 4870
U L $1000 1045
C $1160 1205
W $1340 1385
M $2050 2130
G $4460 4870
NG CC
ET306 C L $1270 1500
C $1460 1690
W $1640 1870
M $3240 3470
G $5780 6320
NG CC
ET348 C L $1400 1630
C $1600 1830
W $1770 2000
M $3320 3550
G $7150 7700
Step 7.
Top Finish: Top Finish
For back-painted glass top (G)
8Q folkstone greyA +$0
91 whiteA +$0
BK blackA +$0
WN warm grey neutralA +$0
Top Finish: Top Finish
For thin profile HPL top with black edge (M)
91 whiteA +$0
BK blackA +$0
G1 graphiteA +$0
Eam
es®
Tabl
es=
==
10 Eames® Tables Price Book (2/18) HermanMiller
Eames® Occasional Table, Squarecontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 10
Top Finish: Solid-Color Laminate
For laminate top with vinyl edge (L)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BKM black matteA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
HT inner toneA +$0
LT light toneA +$0
LU soft whiteA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Top Finish: Recut Veneer
For veneer top with vinyl edge (C)
04 05 06 48
RA light ashA +$0 0 0 0
RK mahogany darkA +$0 0 0 0
RM mahoganyA +$0 0 0 0
Top Finish: Wood Veneer
For veneer top with vinyl edge (C)
04 05 06 48
2U light brown walnutA +$105 105 130 175
40 dark brown walnutA +$105 105 130 175
9N santos palisanderA +$380 380 720 839
A2 white ashA +$105 105 130 175
ED aged cherryA +$105 105 130 175
EK medium red walnutA +$105 105 130 175
EN ebonyA +$105 105 130 175
OU walnutA +$105 105 130 175
UL natural mapleA +$105 105 130 175
UX walnut on cherryA +$105 105 130 175
V2 beechA +$80 80 95 130
For veneer top with veneer edge (W)
04 05 06 48
RA light ashA +$0 0 0 0
RK mahogany darkA +$0 0 0 0
RM mahoganyA +$0 0 0 0
For veneer top with veneer edge (W)
04 05 06 48
2U light brown walnutA +$105 105 130 175
40 dark brown walnutA +$105 105 130 175
9N santos palisanderA +$380 380 720 839
A2 white ashA +$105 105 130 175
ED aged cherryA +$105 105 130 175
EK medium red walnutA +$105 105 130 175
EN ebonyA +$105 105 130 175
OU walnutA +$105 105 130 175
UL natural mapleA +$105 105 130 175
UX walnut on cherryA +$105 105 130 175
V2 beechA +$80 80 95 130
Step 8. Edge Finish
For laminate top with vinyl edge (L) or veneer top with vinyl edge (C)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Step 9. Grommet Finish
For 30" deep x 30" wide (04) or 36" deep x 36" wide (05) with single
center cutout (CC)
PA polished aluminumA +$0
For 42" deep x 42" wide (06) or 48" deep x 48" wide (48) with single
center cutout (CC)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 11
Eames® Occasional Table, Squarecontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 11
Step 10. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 11. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 12. Casters/Glides
For laminate top with vinyl edge (L), veneer top with vinyl edge (C),
veneer top with veneer edge (W), or thin profile HPL top with black edge
(M)
C castersA +$80
G glidesA +$0
For back-painted glass top (G)
G glidesA +$0
Eam
es®
Tabl
es=
==
12 Eames® Tables Price Book (2/18) HermanMiller
Eames® Occasional Table, Squarecontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 12
Eames® Occasional Table, Round,Stone
Product Information
Description
This table has a stone top and comes with adjustable glides. Ships
knocked down with assembly required. Top and base components ship
in separate packages.
Notes
Stone top is 3/4" thick and has a full bullnose edge profile.
Marble tops have a honed finish; quartz tops have a polished finish.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET307!ET308!ET309!ET310!
HermanMiller Eames® Tables Price Book (2/18) 13
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 13
Specification Information
Step 1.
ETA
Step 2. Height
3 16" highA
Step 3. Diameter
07 30" diameterA
08 36" diameterA
09 42" diameterA
10 48" diameterA
Step 4. Base
For 30" diameter (07) or 36" diameter (08)
U universal baseA
C contract baseA
For 42" diameter (09) or 48" diameter (10)
C contract baseA
Step 5. Surface Material
S stone topA
Prices for Steps 1-5.
S
ET307 U $4122
C $4122
ET308 U $4973
C $4973
ET309 C $7240
ET310 C $7499
Step 6. Top Finish
07S 08S 09S 10S
5U georgia grey marbleA +$436 526 610 711
CRR Carrara marbleA +$436 0 -1000 -1000
HR wisconsin black marbleA +$1212 1462 1590 1723
QBL black quartzA +$270 -300 -1200 -1200
QCN concrete quartzA -$250 -900 -1800 -1800
QPL pearl quartzA -$250 -900 -1800 -1800
Step 7. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Step 8. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Eam
es®
Tabl
es=
==
14 Eames® Tables Price Book (2/18) HermanMiller
Eames® Occasional Table, Round,Stone continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 14
Eames® Occasional Table, Square,Stone
Product Information
Description
This table has a stone top and comes with adjustable glides. Ships
knocked down with assembly required. Top and base components ship
in separate packages.
Notes
Stone top is 3/4" thick and has a full bullnose edge profile.
Marble tops have a honed finish; quartz tops have a polished finish.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET304!ET306!
HermanMiller Eames® Tables Price Book (2/18) 15
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 15
Specification Information
Step 1.
ETA
Step 2. Height
3 16" highA
Step 3. Depth/Width
04 30" deep x 30" wideA
06 42" deep x 42" wideA
Step 4. Base
For 30" deep x 30" wide (04)
U universal baseA
C contract baseA
For 42" deep x 42" wide (06)
C contract baseA
Step 5. Surface Material
S stone topA
Prices for Steps 1-5.
S
ET304 U $4122
C $4122
ET306 C $7240
Step 6. Top Finish
04S 06S
5U georgia grey marbleA +$436 610
CRR Carrara marbleA +$436 -1000
HR wisconsin black marbleA +$1212 1590
QBL black quartzA +$270 -1200
QCN concrete quartzA -$250 -1800
QPL pearl quartzA -$250 -1800
Step 7. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Step 8. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Eam
es®
Tabl
es=
==
16 Eames® Tables Price Book (2/18) HermanMiller
Eames® Occasional Table, Square,Stone continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 16
Eames® Low Conference Table,Round
Product Information
Description
This table has a laminate or veneer top with vinyl edge, a veneer top
and edge, a thin-profile HPL top with black edge, or a back-painted glass
top with modified bullnose edge. Table may be specified with cutouts to
accommodate simple power options (specified separately). Each table
has adjustable glides or casters. Shipped knocked down.
Notes
30"-60" tables have a 1-piece top and single column base. 66"-96" tables
have 2-piece tops and a 4-column segmented base.
Laminate and veneer tops 30"-48" diameter are 7/8" thick; tops 54"-96"
diameter are 11/4" thick.
Thin profile HPL tops are 1/2" thick.
Glass tops are back-painted, with a satin etch finish to reduce the
appearance of fingerprints. Tops 30"-48" diameter are 1/2" thick; tops
54"-60" diameter are 1/2" thick with a Formcoat® substructure.
30" and 36" diameter tables may only accommodate USB access. Single
center cutout (CC) grommet option must be specified. Grommet option
is a non-functional hole plug. For USB access, order round dual USB
charging unit (ET990.) separately.
42"-60" diameter tables may accommodate power. Single center cutout
(CC) grommet option must be specified. Grommet provides simple pass-
through with wire management features and a hinged lid. For power
access, order round power module (ET991.) separately.
Multiple column tables (66"-96" diameter) may accommodate up to 4
power modules. Four cutouts (C4) option must be specified; cutouts are
aligned above the columns. Grommets provide simple pass-through
with wire management features and a hinged lid. For power access,
order round power module (ET991.) separately.
Santos palisander veneer is celebrated for its unique grain and color
variations. Similar products ordered in multiples or dissimilar products
ordered separately should be expected to have variation in both grain
and color characteristics; no two products will look exactly alike.
Dimensions
ET207!ET208!ET222!ET223!ET224!ET225!ET226!ET227!ET229!
ET231!
HermanMiller Eames® Tables Price Book (2/18) 17
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 17
Specification Information
Step 1.
ETA
Step 2. Height
2 251/2" highA
Step 3. Diameter
07 30" diameterA
08 36" diameterA
22 42" diameterA
23 48" diameterA
24 54" diameterA
25 60" diameterA
26 66" diameterA
27 72" diameterA
29 84" diameterA
31 96" diameterA
Step 4. Base
For 30" diameter (07) or 36" diameter (08)
C contract baseA
U universal baseA
For 42" diameter (22) or 48" diameter (23)
C contract baseA
S segmented baseA
For 54" diameter (24), 60" diameter (25), 66" diameter (26), 72"
diameter (27), 84" diameter (29), or 96" diameter (31)
S segmented baseA
Step 5. Surface Material
For 30" diameter (07), 36" diameter (08), 42" diameter (22), 48"
diameter (23), 54" diameter (24), or 60" diameter (25)
L laminate top with vinyl edge
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
M thin profile HPL top with black edge
G back-painted glass top
For 66" diameter (26), 72" diameter (27), 84" diameter (29), or 96"
diameter (31)
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
Step 6. Grommets
For 30" diameter (07), 36" diameter (08), 42" diameter (22), 48"
diameter (23), 54" diameter (24), or 60" diameter (25)
NG no grommetA
CC single center cutoutA
For 66" diameter (26), 72" diameter (27), 84" diameter (29), or 96"
diameter (31)
NG no grommetA
C4 four cutoutsA
Prices for Steps 1-6.
NG C4 CC
ET207 C L $860 — 905
C $1010 — 1055
W $1140 — 1185
M $1570 — 1650
G $3440 — 3860
U L $860 — 905
C $1010 — 1055
W $1140 — 1185
M $1570 — 1650
G $3440 — 3860
NG C4 CC
ET208 C L $1000 — 1045
C $1160 — 1205
W $1340 — 1385
M $2050 — 2130
G $4460 — 4870
U L $1000 — 1045
C $1160 — 1205
W $1340 — 1385
M $2050 — 2130
G $4460 — 4870
Eam
es®
Tabl
es=
==
18 Eames® Tables Price Book (2/18) HermanMiller
Eames® Low Conference Table,Round continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 18
NG C4 CC
ET222 C L $1270 — 1500
C $1460 — 1690
W $1640 — 1870
M $3240 — 3470
G $5780 — 6320
S L $1270 — 1500
C $1460 — 1690
W $1640 — 1870
M $3240 — 3470
G $5780 — 6320
NG C4 CC
ET223 C L $1400 — 1630
C $1600 — 1830
W $1770 — 2000
M $3320 — 3550
G $7150 — 7700
S L $1400 — 1630
C $1600 — 1830
W $1770 — 2000
M $3320 — 3550
G $7150 — 7700
NG C4 CC
ET224 S L $1740 — 1970
C $2020 — 2250
W $2150 — 2380
M $5780 — 6010
G $10050 — 10420
NG C4 CC
ET225 S L $2250 — 2480
C $2579 — 2809
W $2879 — 3109
M $5810 — 6040
G $12040 — 12520
NG C4 CC
ET226 S L $3279 4199 —
C $3629 4549 —
W $4029 4949 —
NG C4 CC
ET227 S L $3417 4337 —
C $3869 4789 —
W $4319 5239 —
NG C4 CC
ET229 S L $3859 4779 —
C $4489 5409 —
W $4989 5909 —
NG C4 CC
ET231 S L $4686 5606 —
C $5519 6439 —
W $6119 7039 —
Step 7.
Top Finish: Finish
For back-painted glass top (G)
8Q folkstone greyA +$0
91 whiteA +$0
BK blackA +$0
WN warm grey neutralA +$0
Top Finish
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Top Finish: Solid-Color Laminate
For laminate top with vinyl edge (L)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BKM black matteA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
HT inner toneA +$0
LT light toneA +$0
LU soft whiteA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Top Finish: Recut Veneer
For veneer top with vinyl edge (C)
07 08 22 23 24
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 19
Eames® Low Conference Table,Round continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 19
25 26 27 29 31
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
Top Finish: Wood Veneer
For veneer top with vinyl edge (C)
07 08 22 23 24
2U +$105 105 130 175 230light brown
walnutA
40 +$105 105 130 175 230dark brown
walnutA
9N +$380 380 720 839 976santos palisanderA
A2 white ashA +$105 105 130 175 230
ED aged cherryA +$105 105 130 175 230
EK +$105 105 130 175 230medium red
walnutA
EN ebonyA +$105 105 130 175 230
OU walnutA +$105 105 130 175 230
UL natural mapleA +$105 105 130 175 230
UX +$105 105 130 175 230walnut on cherryA
V2 beechA +$80 80 95 130 170
25 26 27 29 31
2U +$365 365 365 425 495light brown
walnutA
40 +$365 365 365 425 495dark brown
walnutA
9N +$2044 2044 2044 2380 2782santos palisanderA
A2 white ashA +$365 365 365 425 495
ED aged cherryA +$365 365 365 425 495
EK +$365 365 365 425 495medium red
walnutA
EN ebonyA +$365 365 365 425 495
OU walnutA +$365 365 365 425 495
UL natural mapleA +$365 365 365 425 495
UX +$365 365 365 425 495walnut on cherryA
V2 beechA +$250 250 250 290 330
For veneer top with veneer edge (W)
07 08 22 23 24
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
25 26 27 29 31
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
For veneer top with veneer edge (W)
07 08 22 23 24
V2 beechA +$80 80 95 130 170
2U +$105 105 130 175 230light brown
walnutA
A2 white ashA +$105 105 130 175 230
40 +$105 105 130 175 230dark brown
walnutA
ED aged cherryA +$105 105 130 175 230
EK +$105 105 130 175 230medium red
walnutA
EN ebonyA +$105 105 130 175 230
OU walnutA +$105 105 130 175 230
UL natural mapleA +$105 105 130 175 230
UX +$105 105 130 175 230walnut on cherryA
9N +$380 380 720 839 976santos palisanderA
25 26 27 29 31
V2 beechA +$250 250 250 290 330
2U +$365 365 365 425 495light brown
walnutA
A2 white ashA +$365 365 365 425 495
40 +$365 365 365 425 495dark brown
walnutA
ED aged cherryA +$365 365 365 425 495
EK +$365 365 365 425 495medium red
walnutA
EN ebonyA +$365 365 365 425 495
OU walnutA +$365 365 365 425 495
UL natural mapleA +$365 365 365 425 495
UX +$365 365 365 425 495walnut on cherryA
9N +$2044 2044 2044 2380 2782santos palisanderA
Eam
es®
Tabl
es=
==
20 Eames® Tables Price Book (2/18) HermanMiller
Eames® Low Conference Table,Round continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 20
Step 8. Edge Finish
For laminate top with vinyl edge (L) or veneer top with vinyl edge (C)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Step 9. Grommet Finish
For 30" diameter (07) or 36" diameter (08) with single center cutout (CC)
PA polished aluminumA +$0
For 42" diameter (22), 48" diameter (23), 54" diameter (24), 60"
diameter (25), 66" diameter (26), 72" diameter (27), 84" diameter (29),
or 96" diameter (31) with four cutouts (C4), or single center cutout (CC)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
Step 10. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 11. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 12. Casters/Glides
For 30" diameter (07), 36" diameter (08), 42" diameter (22), 48"
diameter (23), or 54" diameter (24) with laminate top with vinyl edge
(L), or veneer top with vinyl edge (C), or veneer top with veneer edge
(W), or thin profile HPL top with black edge (M)
G glidesA +$0
C castersA +$80
For 30" diameter (07), 36" diameter (08), 42" diameter (22), 48"
diameter (23), 54" diameter (24), 60" diameter (25), 66" diameter (26),
72" diameter (27), 84" diameter (29), or 96" diameter (31) with laminate
top with vinyl edge (L), or veneer top with vinyl edge (C), or veneer top
with veneer edge (W), or thin profile HPL top with black edge (M), or
back-painted glass top (G)
G glidesA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 21
Eames® Low Conference Table,Round continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 21
Eames® Low Conference Table,Square
Product Information
Description
This table has a laminate or veneer top with vinyl edge, a veneer top
and edge, a thin-profile HPL top with black edge, or a back-painted glass
top with modified bullnose edge. Table may be specified with cutouts to
accommodate simple power options (specified separately). Each table
has adjustable glides or casters. Shipped knocked down.
Notes
Tables have a 1-piece top and single column base.
Laminate and veneer tops are 7/8" thick.
Thin profile HPL tops are 1/2" thick.
Glass tops are back-painted, with a satin etch finish to reduce the
appearance of fingerprints. Tops are 1/2" thick.
30" and 36" tables may only accommodate USB access. Single center
cutout (CC) grommet option must be specified. Grommet option is a
non-functional hole plug. For USB access, order round dual USB
charging unit (ET990.) separately.
42" and 48" tables may accommodate power. Single center cutout (CC)
grommet option must be specified. Grommet provides simple pass-
through with wire management features and a hinged lid. For power
access, order round power module (ET991.) separately.
Santos palisander veneer is celebrated for its unique grain and color
variations. Similar products ordered in multiples or dissimilar products
ordered separately should be expected to have variation in both grain
and color characteristics; no two products will look exactly alike.
Dimensions
ET204!ET205!ET206!ET248!
22 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Tabl
es=
==
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 22
Specification Information
Step 1.
ETA
Step 2. Height
2 251/2" highA
Step 3. Depth/Width
04 30" deep x 30" wideA
05 36" deep x 36" wideA
06 42" deep x 42" wideA
48 48" deep x 48" wideA
Step 4. Base
For 30" deep x 30" wide (04) or 36" deep x 36" wide (05)
C contract baseA
U universal baseA
For 42" deep x 42" wide (06) or 48" deep x 48" wide (48)
C contract baseA
Step 5. Surface Material
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
M thin profile HPL top with black edgeA
G back-painted glass topA
Step 6. Grommets
NG no grommetA
CC single center cutoutA
Prices for Steps 1-6.
NG CC
ET204 C L $860 905
C $1010 1055
W $1140 1185
M $1570 1650
G $3440 3860
U L $860 905
C $1010 1055
W $1140 1185
M $1570 1650
G $3440 3860
NG CC
ET205 C L $1000 1045
C $1160 1205
W $1340 1385
M $2050 2130
G $4460 4870
U L $1000 1045
C $1160 1205
W $1340 1385
M $2050 2130
G $4460 4870
NG CC
ET206 C L $1270 1500
C $1460 1690
W $1640 1870
M $3240 3470
G $5780 6320
NG CC
ET248 C L $1400 1630
C $1600 1830
W $1770 2000
M $3320 3550
G $7150 7700
Step 7.
Top Finish: Finish
For back-painted glass top (G)
8Q folkstone greyA +$0
91 whiteA +$0
BK blackA +$0
WN warm grey neutralA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 23
Eames® Low Conference Table,Square continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 23
Top Finish
For laminate top with vinyl edge (L)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BKM black matteA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
HT inner toneA +$0
LT light toneA +$0
LU soft whiteA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Top Finish: Finish
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Top Finish: Recut Veneer
For veneer top with vinyl edge (C)
04 05 06 48
RA light ashA +$0 0 0 0
RK mahogany darkA +$0 0 0 0
RM mahoganyA +$0 0 0 0
Top Finish: Wood Veneer
For veneer top with vinyl edge (C)
04 05 06 48
2U light brown walnutA +$105 105 130 175
40 dark brown walnutA +$105 105 130 175
9N santos palisanderA +$380 380 720 839
A2 white ashA +$105 105 130 175
ED aged cherryA +$105 105 130 175
EK medium red walnutA +$105 105 130 175
EN ebonyA +$105 105 130 175
OU walnutA +$105 105 130 175
UL natural mapleA +$105 105 130 175
UX walnut on cherryA +$105 105 130 175
V2 beechA +$80 80 95 130
For veneer top with veneer edge (W)
04 05 06 48
RA light ashA +$0 0 0 0
RK mahogany darkA +$0 0 0 0
RM mahoganyA +$0 0 0 0
For veneer top with veneer edge (W)
04 05 06 48
2U light brown walnutA +$105 105 130 175
40 dark brown walnutA +$105 105 130 175
9N santos palisanderA +$380 380 720 839
A2 white ashA +$105 105 130 175
ED aged cherryA +$105 105 130 175
EK medium red walnutA +$105 105 130 175
EN ebonyA +$105 105 130 175
OU walnutA +$105 105 130 175
UL natural mapleA +$105 105 130 175
UX walnut on cherryA +$105 105 130 175
V2 beechA +$80 80 95 130
Step 8. Edge Finish
For laminate top with vinyl edge (L) or veneer top with vinyl edge (C)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Step 9. Grommet Finish
Finish
For 30" deep x 30" wide (04) or 36" deep x 36" wide (05) with single
center cutout (CC)
PA polished aluminumA +$0
For 42" deep x 42" wide (06) or 48" deep x 48" wide (48) with single
center cutout (CC)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
Eam
es®
Tabl
es=
==
24 Eames® Tables Price Book (2/18) HermanMiller
Eames® Low Conference Table,Square continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 24
Step 10. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 11. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 12. Casters/Glides
For laminate top with vinyl edge (L), veneer top with vinyl edge (C),
veneer top with veneer edge (W), or thin profile HPL top with black edge
(M)
G glidesA +$0
C castersA +$80
For back-painted glass top (G)
G glidesA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 25
Eames® Low Conference Table,Square continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 25
Eames® Low Conference Table,Rectangular
Product Information
Description
This table has a laminate or veneer top with vinyl edge, a veneer top
and edge, a thin-profile HPL top with black edge, or a back-painted glass
top with modified bullnose edge. Table may be specified with cutouts to
accommodate simple power options (specified separately). Each table
has adjustable glides or casters. Shipped knocked down.
Notes
60"-wide to 96"-wide tables have a 1-piece top and 2-column segmented
base. 108"-wide tables have 1-piece (laminate) or 2-piece (veneer) tops
and a 2-column segmented base.
For 108" wide veneer tables, tops are shipped in 2 equal pieces.
Laminate and veneer tops are 11/4" thick.
Thin profile HPL tops are 1/2" thick.
Glass tops are back-painted, with a satin etch finish to reduce the
appearance of fingerprints. Tops up to 42"×78" are 1/2" thick; tops
42"×84" to 54"×108" are 3/8" thick with a Formcoat® substructure.
Tables may be specified with cutouts for power in various
configurations. Round cutouts align with columns, and oval cutouts are
centered between columns.
Order the following compatible power components separately:
• Round power module (ET991.)
• Oval power module (ET992.)
Santos palisander veneer is celebrated for its unique grain and color
variations. Similar products ordered in multiples or dissimilar products
ordered separately should be expected to have variation in both grain
and color characteristics; no two products will look exactly alike.
Dimensions
ET242!ET243!ET244!ET245!ET247!ET250!ET251!ET252!ET254!
ET255!ET256!ET257!ET287!ET288!ET289!
26 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Tabl
es=
==
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 26
Specification Information
Step 1.
ETA
Step 2. Height
2 251/2" highA
Step 3. Depth/Width
87R 30" deep x 60" wideA
88R 30" deep x 72" wideA
42R 36" deep x 60" wideA
43R 36" deep x 72" wideA
44R 36" deep x 84" wideA
89R 36" deep x 96" wideA
50R 42" deep x 66" wideA
51R 42" deep x 72" wideA
52R 42" deep x 78" wideA
45R 42" deep x 84" wideA
54R 48" deep x 84" wideA
47R 48" deep x 96" wideA
55R 54" deep x 90" wideA
56R 54" deep x 96" wideA
57R 54" deep x 108" wideA
Step 4. Base
S segmented baseA
Step 5. Surface Material
For 30" deep x 60" wide (87R), 30" deep x 72" wide (88R), 36" deep x
60" wide (42R), 36" deep x 72" wide (43R), 36" deep x 84" wide (44R),
36" deep x 96" wide (89R), 42" deep x 66" wide (50R), 42" deep x 72"
wide (51R), 42" deep x 78" wide (52R), 42" deep x 84" wide (45R), 48"
deep x 84" wide (54R), 48" deep x 96" wide (47R), 54" deep x 90" wide
(55R), or 54" deep x 96" wide (56R)
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
M thin profile HPL top with black edgeA
G back-painted glass topA
For 54" deep x 108" wide (57R)
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
G back-painted glass topA
Step 6. Grommets
NG no grommetA
C2 2 round cutouts, over columnsA
CR single centered oval cutoutA
CA 2 round cutouts and center oval cutoutA
Prices for Steps 1-6.
NG C2 CR CA
ET287R S L $1661 2121 1891 2351
C $2040 2500 2270 2730
W $2200 2660 2430 2890
M $3180 3640 3410 3870
G $6650 7430 7470 8260
NG C2 CR CA
ET288R S L $1782 2242 2012 2472
C $2220 2680 2450 2910
W $2460 2920 2690 3150
M $3200 3660 3430 3890
G $7500 8290 8320 9110
NG C2 CR CA
ET242R S L $1879 2339 2109 2569
C $2270 2730 2500 2960
W $2464 2924 2694 3154
M $3860 4320 4090 4550
G $7500 8290 8320 9110
NG C2 CR CA
ET243R S L $1926 2386 2156 2616
C $2340 2800 2570 3030
W $2570 3030 2800 3260
M $3880 4340 4110 4570
G $8520 9300 9340 10130
NG C2 CR CA
ET244R S L $2014 2474 2244 2704
C $2520 2980 2750 3210
W $2810 3270 3040 3500
M $3910 4370 4140 4600
G $9530 10320 10360 11140
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 27
Eames® Low Conference Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 27
NG C2 CR CA
ET289R S L $2157 2617 2387 2847
C $2680 3140 2910 3370
W $2890 3350 3120 3580
M $3930 4390 4160 4620
G $10620 11410 11450 12230
NG C2 CR CA
ET250R S L $2249 2709 2479 2939
C $2610 3070 2840 3300
W $2940 3400 3170 3630
M $3890 4350 4120 4580
G $8920 9710 9750 10530
NG C2 CR CA
ET251R S L $2317 2777 2547 3007
C $2646 3106 2876 3336
W $2967 3427 3197 3657
M $3900 4360 4130 4590
G $9530 10320 10360 11140
NG C2 CR CA
ET252R S L $2366 2826 2596 3056
C $2769 3229 2999 3459
W $3069 3529 3299 3759
M $6280 6740 6510 6970
G $10150 10930 10970 11760
NG C2 CR CA
ET245R S L $2394 2854 2624 3084
C $2798 3258 3028 3488
W $3104 3564 3334 3794
M $6280 6740 6510 6970
G $11100 12420 12280 13610
NG C2 CR CA
ET254R S L $2694 3154 2924 3384
C $3109 3569 3339 3799
W $3409 3869 3639 4099
M $6300 6760 6530 6990
G $12490 13820 13680 15000
NG C2 CR CA
ET247R S L $2753 3213 2983 3443
C $3173 3633 3403 3863
W $3523 3983 3753 4213
M $6330 6790 6560 7020
G $14090 15440 15280 16600
NG C2 CR CA
ET255R S L $3265 3725 3495 3955
C $3708 4168 3938 4398
W $4108 4568 4338 4798
M $6330 6790 6560 7020
G $14780 16110 16040 17300
NG C2 CR CA
ET256R S L $3306 3766 3536 3996
C $3828 4288 4058 4518
W $4278 4738 4508 4968
M $6350 6810 6580 7040
G $15680 17010 16870 18200
NG C2 CR CA
ET257R S L $4301 4761 4531 4991
C $4794 5254 5024 5484
W $5319 5779 5549 6009
G $17480 18810 18670 20000
Step 7.
Top Finish: Finish
For back-painted glass top (G)
8Q folkstone greyA +$0
91 whiteA +$0
BK blackA +$0
WN warm grey neutralA +$0
Top Finish: Finish
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Eam
es®
Tabl
es=
==
28 Eames® Tables Price Book (2/18) HermanMiller
Eames® Low Conference Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 28
Top Finish: Solid-Color Laminate
For laminate top with vinyl edge (L)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BKM black matteA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
HT inner toneA +$0
LT light toneA +$0
LU soft whiteA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Top Finish: Recut Finish
For veneer top with vinyl edge (C)
87R 88R 42R 43R 44R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
89R 50R 51R 52R 45R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
54R 47R 55R 56R 57R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
Top Finish: Wood Veneer
For veneer top with vinyl edge (C)
87R 88R 42R 43R 44R
2U +$250 265 265 290 305light brown
walnutA
40 +$250 265 265 290 305dark brown
walnutA
9N +$950 1009 1009 1104 1161santos palisanderA
A2 white ashA +$250 265 265 290 305
ED aged cherryA +$250 265 265 290 305
EK +$250 265 265 290 305medium red
walnutA
EN ebonyA +$250 265 265 290 305
OU walnutA +$250 265 265 290 305
UL natural mapleA +$250 265 265 290 305
UX +$250 265 265 290 305walnut on cherryA
V2 beechA +$190 205 205 215 225
89R 50R 51R 52R 45R
2U +$330 290 305 330 330light brown
walnutA
40 +$330 290 305 330 330dark brown
walnutA
9N +$1420 1160 1220 1320 1320santos palisanderA
A2 white ashA +$330 290 305 330 330
ED aged cherryA +$330 290 305 330 330
EK +$330 290 305 330 330medium red
walnutA
EN ebonyA +$330 290 305 330 330
OU walnutA +$330 290 305 330 330
UL natural mapleA +$330 290 305 330 330
UX +$330 290 305 330 330walnut on cherryA
V2 beechA +$245 215 225 245 245
54R 47R 55R 56R 57R
2U +$385 385 425 440 500light brown
walnutA
40 +$385 385 425 440 500dark brown
walnutA
9N +$1656 1656 1700 1760 2350santos palisanderA
A2 white ashA +$385 385 425 440 500
ED aged cherryA +$385 385 425 440 500
EK +$385 385 425 440 500medium red
walnutA
EN ebonyA +$385 385 425 440 500
OU walnutA +$385 385 425 440 500
UL natural mapleA +$385 385 425 440 500
UX +$385 385 425 440 500walnut on cherryA
V2 beechA +$280 280 290 315 345
For veneer top with veneer edge (W)
87R 88R 42R 43R 44R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
89R 50R 51R 52R 45R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
54R 47R 55R 56R 57R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 29
Eames® Low Conference Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 29
For veneer top with veneer edge (W)
87R 88R 42R 43R 44R
V2 beechA +$190 205 205 215 225
2U +$250 265 265 290 305light brown
walnutA
A2 white ashA +$250 265 265 290 305
40 +$250 265 265 290 305dark brown
walnutA
ED aged cherryA +$250 265 265 290 305
EK +$250 265 265 290 305medium red
walnutA
EN ebonyA +$250 265 265 290 305
OU walnutA +$250 265 265 290 305
UL natural mapleA +$250 265 265 290 305
UX +$250 265 265 290 305walnut on cherryA
9N +$950 1009 1009 1104 1161santos palisanderA
89R 50R 51R 52R 45R
V2 beechA +$245 215 225 245 245
2U +$330 290 305 330 330light brown
walnutA
A2 white ashA +$330 290 305 330 330
40 +$330 290 305 330 330dark brown
walnutA
ED aged cherryA +$330 290 305 330 330
EK +$330 290 305 330 330medium red
walnutA
EN ebonyA +$330 290 305 330 330
OU walnutA +$330 290 305 330 330
UL natural mapleA +$330 290 305 330 330
UX +$330 290 305 330 330walnut on cherryA
9N +$1420 1160 1220 1320 1320santos palisanderA
54R 47R 55R 56R 57R
V2 beechA +$280 280 290 315 345
2U +$385 385 425 440 500light brown
walnutA
A2 white ashA +$385 385 425 440 500
40 +$385 385 425 440 500dark brown
walnutA
ED aged cherryA +$385 385 425 440 500
EK +$385 385 425 440 500medium red
walnutA
EN ebonyA +$385 385 425 440 500
OU walnutA +$385 385 425 440 500
UL natural mapleA +$385 385 425 440 500
UX +$385 385 425 440 500walnut on cherryA
9N +$1656 1656 1700 1760 2350santos palisanderA
Step 8. Edge Finish
For laminate top with vinyl edge (L) or veneer top with vinyl edge (C)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Step 9. Grommet Finish
For 2 round cutouts, over columns (C2)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
For single centered oval cutout (CR) or 2 round cutouts and center oval
cutout (CA)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$150
Eam
es®
Tabl
es=
==
30 Eames® Tables Price Book (2/18) HermanMiller
Eames® Low Conference Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 30
Step 10. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 11. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 12. Casters/Glides
For 30" deep x 60" wide (87R), 30" deep x 72" wide (88R), 36" deep x
60" wide (42R), 36" deep x 72" wide (43R), 36" deep x 84" wide (44R),
36" deep x 96" wide (89R), 42" deep x 66" wide (50R), 42" deep x 72"
wide (51R), 42" deep x 78" wide (52R), 42" deep x 84" wide (45R), 48"
deep x 84" wide (54R), or 48" deep x 96" wide (47R) with laminate top
with vinyl edge (L), or veneer top with vinyl edge (C), or veneer top with
veneer edge (W), or thin profile HPL top with black edge (M)
G glidesA +$0
C castersA +$80
For 30" deep x 60" wide (87R), 30" deep x 72" wide (88R), 36" deep x
60" wide (42R), 36" deep x 72" wide (43R), 36" deep x 84" wide (44R),
36" deep x 96" wide (89R), 42" deep x 66" wide (50R), 42" deep x 72"
wide (51R), 42" deep x 78" wide (52R), 42" deep x 84" wide (45R), 48"
deep x 84" wide (54R), 48" deep x 96" wide (47R), 54" deep x 90" wide
(55R), 54" deep x 96" wide (56R), or 54" deep x 108" wide (57R) with
laminate top with vinyl edge (L), or veneer top with vinyl edge (C), or
veneer top with veneer edge (W), or back-painted glass top (G), or thin
profile HPL top with black edge (M)
G glidesA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 31
Eames® Low Conference Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 31
Eames® Low Conference Table,Oval
Product Information
Description
This table has a laminate or veneer top with vinyl edge, a veneer top
and edge, a thin-profile HPL top with black edge, or a back-painted glass
top with modified bullnose edge. Table may be specified with cutouts to
accommodate simple power options (specified separately). Each table
has adjustable glides or casters. Shipped knocked down.
Notes
60"-wide to 96"-wide tables have a 1-piece top and 2-column segmented
base. 108"-wide tables have 1-piece (laminate) or 2-piece (veneer) tops
and a 2-column segmented base.
For 108" wide veneer tables, tops are shipped in 2 equal pieces.
Laminate and veneer tops are 11/4" thick.
Thin profile HPL tops are 1/2" thick.
Glass tops are back-painted, with a satin etch finish to reduce the
appearance of fingerprints. Tops up to 42"×78" are 1/2" thick; tops
42"×84" to 54"×108" are 3/8" thick with a Formcoat® substructure.
Tables may be specified with cutouts for power in various
configurations. Round cutouts align with columns, and oval cutouts are
centered between columns.
Order the following compatible power components separately:
• Round power module (ET991.)
• Oval power module (ET992.)
Santos palisander veneer is celebrated for its unique grain and color
variations. Similar products ordered in multiples or dissimilar products
ordered separately should be expected to have variation in both grain
and color characteristics; no two products will look exactly alike.
Dimensions
ET243!ET244!ET247!ET249!ET250!ET251!ET252!ET253!ET254!
ET255!ET256!ET257!ET287!ET288!ET289!
32 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Tabl
es=
==
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 32
Specification Information
Step 1.
ETA
Step 2. Height
2 251/2" highA
Step 3. Depth/Width
87V 30" deep x 60" wideA
88V 30" deep x 72" wideA
49V 36" deep x 60" wideA
43V 36" deep x 72" wideA
44V 36" deep x 84" wideA
89V 36" deep x 96" wideA
50V 42" deep x 66" wideA
51V 42" deep x 72" wideA
52V 42" deep x 78" wideA
53V 42" deep x 84" wideA
54V 48" deep x 84" wideA
47V 48" deep x 96" wideA
55V 54" deep x 90" wideA
56V 54" deep x 96" wideA
57V 54" deep x 108" wideA
Step 4. Base
S segmented baseA
Step 5. Surface Material
For 30" deep x 60" wide (87V), 30" deep x 72" wide (88V), 36" deep x
60" wide (49V), 36" deep x 72" wide (43V), 36" deep x 84" wide (44V),
36" deep x 96" wide (89V), 42" deep x 66" wide (50V), 42" deep x 72"
wide (51V), 42" deep x 78" wide (52V), 42" deep x 84" wide (53V), 48"
deep x 84" wide (54V), 48" deep x 96" wide (47V), 54" deep x 90" wide
(55V), or 54" deep x 96" wide (56V)
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
M thin profile HPL top with black edgeA
G back-painted glass topA
For 54" deep x 108" wide (57V)
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
G back-painted glass topA
Step 6. Grommets
NG no grommetA
C2 2 round cutouts, over columnsA
CR single centered oval cutoutA
CA 2 round cutouts and center oval cutoutA
Prices for Steps 1-6.
NG C2 CR CA
ET287V S L $1661 2121 1891 2351
C $2040 2500 2270 2730
W $2200 2660 2430 2890
M $3180 3640 3410 3870
G $6650 7430 7470 8260
NG C2 CR CA
ET288V S L $1782 2242 2012 2472
C $2220 2680 2450 2910
W $2460 2920 2690 3150
M $3200 3660 3430 3890
G $7500 8290 8320 9110
NG C2 CR CA
ET249V S L $1879 2339 2109 2569
C $2270 2730 2500 2960
W $2464 2924 2694 3154
M $3860 4320 4090 4550
G $7500 8290 8320 9110
NG C2 CR CA
ET243V S L $1926 2386 2156 2616
C $2340 2800 2570 3030
W $2570 3030 2800 3260
M $3880 4340 4110 4570
G $8520 9300 9340 10130
NG C2 CR CA
ET244V S L $2014 2474 2244 2704
C $2520 2980 2750 3210
W $2810 3270 3040 3500
M $3910 4370 4140 4600
G $9530 10320 10360 11140
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 33
Eames® Low Conference Table,Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 33
NG C2 CR CA
ET289V S L $2157 2617 2387 2847
C $2680 3140 2910 3370
W $2890 3350 3120 3580
M $3930 4390 4160 4620
G $10620 11410 11450 12230
NG C2 CR CA
ET250V S L $2249 2709 2479 2939
C $2610 3070 2840 3300
W $2940 3400 3170 3630
M $3890 4350 4120 4580
G $8920 9710 9750 10530
NG C2 CR CA
ET251V S L $2317 2777 2547 3007
C $2646 3106 2876 3336
W $2967 3427 3197 3657
M $3900 4360 4130 4590
G $9530 10320 10360 11140
NG C2 CR CA
ET252V S L $2366 2826 2596 3056
C $2769 3229 2999 3459
W $3069 3529 3299 3759
M $6280 6740 6510 6970
G $10150 10930 10970 11760
NG C2 CR CA
ET253V S L $2394 2854 2624 3084
C $2798 3258 3028 3488
W $3104 3564 3334 3794
M $6280 6740 6510 6970
G $11100 12420 12280 13610
NG C2 CR CA
ET254V S L $2694 3154 2924 3384
C $3109 3569 3339 3799
W $3409 3869 3639 4099
M $6300 6760 6530 6990
G $12490 13820 13680 15000
NG C2 CR CA
ET247V S L $2753 3213 2983 3443
C $3173 3633 3403 3863
W $3523 3983 3753 4213
M $6330 6790 6560 7020
G $14090 15440 15280 16600
NG C2 CR CA
ET255V S L $3265 3725 3495 3955
C $3708 4168 3938 4398
W $4108 4568 4338 4798
M $6330 6790 6560 7020
G $14780 16110 16040 17300
NG C2 CR CA
ET256V S L $3306 3766 3536 3996
C $3828 4288 4058 4518
W $4278 4738 4508 4968
M $6350 6810 6580 7040
G $15680 17010 16870 18200
NG C2 CR CA
ET257V S L $4301 4761 4531 4991
C $4794 5254 5024 5484
W $5319 5779 5549 6009
G $17480 18810 18670 20000
Step 7.
Top Finish: Finish
For back-painted glass top (G)
8Q folkstone greyA +$0
91 whiteA +$0
BK blackA +$0
WN warm grey neutralA +$0
Top Finish: Finish
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Eam
es®
Tabl
es=
==
34 Eames® Tables Price Book (2/18) HermanMiller
Eames® Low Conference Table,Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 34
Top Finish: Solid-Color Laminate
For laminate top with vinyl edge (L)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BKM black matteA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
HT inner toneA +$0
LT light toneA +$0
LU soft whiteA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Top Finish: Recut Veneer
For veneer top with vinyl edge (C)
87V 88V 49V 43V 44V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
89V 50V 51V 52V 53V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
54V 47V 55V 56V 57V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
Top Finish: Wood Veneer
For veneer top with vinyl edge (C)
87V 88V 49V 43V 44V
2U +$250 265 265 290 305light brown
walnutA
40 +$250 265 265 290 305dark brown
walnutA
9N +$950 1009 1009 1104 1161santos palisanderA
A2 white ashA +$250 265 265 290 305
ED aged cherryA +$250 265 265 290 305
EK +$250 265 265 290 305medium red
walnutA
EN ebonyA +$250 265 265 290 305
OU walnutA +$250 265 265 290 305
UL natural mapleA +$250 265 265 290 305
UX +$250 265 265 290 305walnut on cherryA
V2 beechA +$190 205 205 215 225
89V 50V 51V 52V 53V
2U +$330 290 305 330 330light brown
walnutA
40 +$330 290 305 330 330dark brown
walnutA
9N +$1420 1160 1220 1320 1320santos palisanderA
A2 white ashA +$330 290 305 330 330
ED aged cherryA +$330 290 305 330 330
EK +$330 290 305 330 330medium red
walnutA
EN ebonyA +$330 290 305 330 330
OU walnutA +$330 290 305 330 330
UL natural mapleA +$330 290 305 330 330
UX +$330 290 305 330 330walnut on cherryA
V2 beechA +$245 215 225 245 245
54V 47V 55V 56V 57V
2U +$385 385 425 440 500light brown
walnutA
40 +$385 385 425 440 500dark brown
walnutA
9N +$1656 1656 1700 1760 2350santos palisanderA
A2 white ashA +$385 385 425 440 500
ED aged cherryA +$385 385 425 440 500
EK +$385 385 425 440 500medium red
walnutA
EN ebonyA +$385 385 425 440 500
OU walnutA +$385 385 425 440 500
UL natural mapleA +$385 385 425 440 500
UX +$385 385 425 440 500walnut on cherryA
V2 beechA +$280 280 290 315 345
For veneer top with veneer edge (W)
87V 88V 49V 43V 44V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
89V 50V 51V 52V 53V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
54V 47V 55V 56V 57V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 35
Eames® Low Conference Table,Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 35
For veneer top with veneer edge (W)
87V 88V 49V 43V 44V
V2 beechA +$190 205 205 215 225
2U +$250 265 265 290 305light brown
walnutA
A2 white ashA +$250 265 265 290 305
40 +$250 265 265 290 305dark brown
walnutA
ED aged cherryA +$250 265 265 290 305
EK +$250 265 265 290 305medium red
walnutA
EN ebonyA +$250 265 265 290 305
OU walnutA +$250 265 265 290 305
UL natural mapleA +$250 265 265 290 305
UX +$250 265 265 290 305walnut on cherryA
9N +$950 1009 1009 1104 1161santos palisanderA
89V 50V 51V 52V 53V
V2 beechA +$245 215 225 245 245
2U +$330 290 305 330 330light brown
walnutA
A2 white ashA +$330 290 305 330 330
40 +$330 290 305 330 330dark brown
walnutA
ED aged cherryA +$330 290 305 330 330
EK +$330 290 305 330 330medium red
walnutA
EN ebonyA +$330 290 305 330 330
OU walnutA +$330 290 305 330 330
UL natural mapleA +$330 290 305 330 330
UX +$330 290 305 330 330walnut on cherryA
9N +$1420 1160 1220 1320 1320santos palisanderA
54V 47V 55V 56V 57V
V2 beechA +$280 280 290 315 345
2U +$385 385 425 440 500light brown
walnutA
A2 white ashA +$385 385 425 440 500
40 +$385 385 425 440 500dark brown
walnutA
ED aged cherryA +$385 385 425 440 500
EK +$385 385 425 440 500medium red
walnutA
EN ebonyA +$385 385 425 440 500
OU walnutA +$385 385 425 440 500
UL natural mapleA +$385 385 425 440 500
UX +$385 385 425 440 500walnut on cherryA
9N +$1656 1656 1700 1760 2350santos palisanderA
Step 8. Edge Finish
For laminate top with vinyl edge (L) or veneer top with vinyl edge (C)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Step 9. Grommet Finish
For 2 round cutouts, over columns (C2)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
For single centered oval cutout (CR) or 2 round cutouts and center oval
cutout (CA)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$150
Eam
es®
Tabl
es=
==
36 Eames® Tables Price Book (2/18) HermanMiller
Eames® Low Conference Table,Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 36
Step 10. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 11. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 12. Casters/Glides
For 30" deep x 60" wide (87V), 30" deep x 72" wide (88V), 36" deep x
60" wide (49V), 36" deep x 72" wide (43V), 36" deep x 84" wide (44V),
36" deep x 96" wide (89V), 42" deep x 66" wide (50V), 42" deep x 72"
wide (51V), 42" deep x 78" wide (52V), 42" deep x 84" wide (53V), 48"
deep x 84" wide (54V), or 48" deep x 96" wide (47V) with laminate top
with vinyl edge (L), or veneer top with vinyl edge (C), or veneer top with
veneer edge (W), or thin profile HPL top with black edge (M)
G glidesA +$0
C castersA +$80
For 30" deep x 60" wide (87V), 30" deep x 72" wide (88V), 36" deep x
60" wide (49V), 36" deep x 72" wide (43V), 36" deep x 84" wide (44V),
36" deep x 96" wide (89V), 42" deep x 66" wide (50V), 42" deep x 72"
wide (51V), 42" deep x 78" wide (52V), 42" deep x 84" wide (53V), 48"
deep x 84" wide (54V), 48" deep x 96" wide (47V), 54" deep x 90" wide
(55V), 54" deep x 96" wide (56V), or 54" deep x 108" wide (57V) with
laminate top with vinyl edge (L), or veneer top with vinyl edge (C), or
veneer top with veneer edge (W), or back-painted glass top (G), or thin
profile HPL top with black edge (M)
G glidesA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 37
Eames® Low Conference Table,Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 37
Eames® Low Conference Table,Round, Stone
Product Information
Description
This table has a stone top and comes with adjustable glides. Ships
knocked down with assembly required. Top and base components ship
in separate packages.
Notes
Stone top is 3/4" thick and has a full bullnose edge profile.
Marble tops have a honed finish; quartz tops have a polished finish.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET207!ET208!ET209!ET210!
38 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Tabl
es=
==
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 38
Specification Information
Step 1.
ETA
Step 2. Height
2 251/2" highA
Step 3. Diameter
07 30" diameterA
08 36" diameterA
09 42" diameterA
10 48" diameterA
Step 4. Base
For 30" diameter (07) or 36" diameter (08)
U universal baseA
C contract baseA
For 42" diameter (09) or 48" diameter (10)
C contract baseA
Step 5. Surface Material
S stone topA
Prices for Steps 1-5.
S
ET207 U $4122
C $4122
ET208 U $4973
C $4973
ET209 C $7240
ET210 C $7499
Step 6. Top Finish
07S 08S 09S 10S
5U georgia grey marbleA +$436 526 610 711
CRR Carrara marbleA +$436 0 -1000 -1000
HR wisconsin black marbleA +$1212 1462 1590 1723
QBL black quartzA +$270 -300 -1200 -1200
QCN concrete quartzA -$250 -900 -1800 -1800
QPL pearl quartzA -$250 -900 -1800 -1800
Step 7. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Step 8. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 39
Eames® Low Conference Table,Round, Stone continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 39
Eames® Low Conference Table,Square, Stone
Product Information
Description
This table has a stone top and comes with adjustable glides. Ships
knocked down with assembly required. Top and base components ship
in separate packages.
Notes
Stone top is 3/4" thick and has a full bullnose edge profile.
Marble tops have a honed finish; quartz tops have a polished finish.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET204!ET206!
40 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Tabl
es=
==
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 40
Specification Information
Step 1.
ETA
Step 2. Height
2 251/2" highA
Step 3. Depth/Width
04 30" deep x 30" wideA
06 42" deep x 42" wideA
Step 4. Base
For 30" deep x 30" wide (04)
U universal baseA
C contract baseA
For 42" deep x 42" wide (06)
C contract baseA
Step 5. Surface Material
S stone topA
Prices for Steps 1-5.
S
ET204 U $4122
C $4122
ET206 C $7240
Step 6. Top Finish
04S 06S
5U georgia grey marbleA +$436 610
CRR Carrara marbleA +$436 -1000
HR wisconsin black marbleA +$1212 1590
QBL black quartzA +$270 -1200
QCN concrete quartzA -$250 -1800
QPL pearl quartzA -$250 -1800
Step 7. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Step 8. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 41
Eames® Low Conference Table,Square, Stone continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 41
Eames® Low Conference Table,Rectangular, Stone
Product Information
Description
This table has a stone top and comes with adjustable glides. Ships
knocked down with assembly required. Top and base components ship
in separate packages.
Notes
Stone top is 3/4" thick and has a full bullnose edge profile.
Marble tops have a honed finish; quartz tops have a polished finish.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET243!ET250!ET252!ET287!
42 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Tabl
es=
==
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 42
Specification Information
Step 1.
ETA
Step 2. Height
2 251/2" highA
Step 3. Depth/Width
43R 36" deep x 72" wideA
50R 42" deep x 66" wideA
52R 42" deep x 78" wideA
87R 30" deep x 60" wideA
Step 4. Base
S segmented baseA
Step 5. Surface Material
S stone topA
Prices for Steps 1-5.
S
ET243R S $10844
ET250R S $10558
ET252R S $11122
ET287R S $9696
Step 6. Top Finish
43RS 50RS 52RS 87RS
5U georgia grey marbleA +$1148 0 0 1026
CRR Carrara marbleA -$500 -500 -800 -500
HR wisconsin black marbleA +$3141 3500 3500 2808
QBL black quartzA -$1200 -1400 -1400 -1400
QCN concrete quartzA -$3000 -3000 -3000 -2200
QPL pearl quartzA -$3000 -3000 -3000 -2200
Step 7. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Step 8. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 43
Eames® Low Conference Table,Rectangular, Stone continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 43
Eames® Low Conference Table,Oval, Stone
Product Information
Description
This table has a stone top and comes with adjustable glides. Ships
knocked down with assembly required. Top and base components ship
in separate packages.
Notes
Stone top is 3/4" thick and has a full bullnose edge profile.
Marble tops have a honed finish; quartz tops have a polished finish.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET243!ET250!ET252!ET287!
44 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Tabl
es=
==
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 44
Specification Information
Step 1.
ETA
Step 2. Height
2 251/2" highA
Step 3. Depth/Width
87V 30" deep x 60" wideA
43V 36" deep x 72" wideA
50V 42" deep x 66" wideA
52V 42" deep x 78" wideA
Step 4. Base
S segmented baseA
Step 5. Surface Material
S stone topA
Prices for Steps 1-5.
S
ET287V S $9696
ET243V S $10844
ET250V S $10558
ET252V S $11122
Step 6. Top Finish
87VS 43VS 50VS 52VS
5U georgia grey marbleA +$700 0 1117 1177
CRR Carrara marbleA +$450 -300 500 500
HR wisconsin black marbleA +$2215 3050 3058 3221
QBL black quartzA -$400 -350 -500 -500
QCN concrete quartzA -$1200 -2000 -2000 -2000
QPL pearl quartzA -$1200 -2000 -2000 -2000
Step 7. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Step 8. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 45
Eames® Low Conference Table,Oval, Stone continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 45
Eames® Conference Table, Round
Product Information
Description
This table has a laminate or veneer top with vinyl edge, a veneer top
and edge, a thin-profile HPL top with black edge, or a back-painted glass
top with modified bullnose edge. Table may be specified with cutouts to
accommodate simple power options (specified separately). Each table
has adjustable glides or casters. Shipped knocked down.
Notes
30"-60" tables have a 1-piece top and single column base. 66"-96" tables
have 2-piece tops and a 4-column segmented base.
Laminate tops 30"-48" diameter are 7/8" thick; tops 54"-96" diameter are
11/8" thick.
Veneer tops 30"-48" diameter are 3/4" thick; tops 54"-96" diameter are
11/8" thick.
Thin profile HPL tops are 1/2" thick.
Glass tops are back-painted, with a satin etch finish to reduce the
appearance of fingerprints. Tops 30"-48" diameter are 1/2" thick; tops
54"-60" diameter are 3/8" thick.
30" and 36" diameter tables may only accommodate USB access. Single
center cutout (CC) grommet option must be specified. Grommet option
is a non-functional hole plug. For USB access, order round dual USB
charging unit (ET990.) separately.
42"-60" diameter tables may accommodate power. Single center cutout
(CC) grommet option must be specified. Grommet provides simple pass-
through with wire management features and a hinged lid. For power
access, order round power module (ET991.) separately.
Multiple column tables (66"-96" diameter) may accommodate up to 4
power modules. Four cutouts (C4) option must be specified; cutouts are
aligned above the columns. Grommets provide simple pass-through
with wire management features and a hinged lid. For power access,
order round power module (ET991.) separately.
Santos palisander veneer is celebrated for its unique grain and color
variations. Similar products ordered in multiples or dissimilar products
ordered separately should be expected to have variation in both grain
and color characteristics; no two products will look exactly alike.
Dimensions
ET107!ET108!ET122!ET123!ET124!ET125!ET126!ET127!ET129!
ET131!
46 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Tabl
es=
==
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 46
Specification Information
Step 1.
ETA
Step 2. Height
1 281/2" high
Step 3. Diameter
07 30" diameterA
08 36" diameterA
22 42" diameterA
23 48" diameterA
24 54" diameterA
25 60" diameterA
26 66" diameterA
27 72" diameterA
29 84" diameterA
31 96" diameterA
Step 4. Base
For 54" diameter (24), 60" diameter (25), 66" diameter (26), 72"
diameter (27), 84" diameter (29), or 96" diameter (31)
S segmented baseA
For 42" diameter (22) or 48" diameter (23)
C contract baseA
S segmented baseA
For 30" diameter (07) or 36" diameter (08)
C contract baseA
U universal baseA
Step 5. Surface Material
For 30" diameter (07), 36" diameter (08), 42" diameter (22), 48"
diameter (23), 54" diameter (24), or 60" diameter (25)
L laminate top with vinyl edge
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
M thin profile HPL top with black edge
G back-painted glass top
For 66" diameter (26), 72" diameter (27), 84" diameter (29), or 96"
diameter (31)
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
Step 6. Grommets
For 30" diameter (07), 36" diameter (08), 42" diameter (22), 48"
diameter (23), 54" diameter (24), or 60" diameter (25)
NG no grommetA
CC single center cutoutA
For 66" diameter (26), 72" diameter (27), 84" diameter (29), or 96"
diameter (31)
NG no grommetA
C4 four cutoutsA
Prices for Steps 1-6.
NG C4 CC
ET107 C L $860 — 905
C $1010 — 1055
W $1140 — 1185
M $1570 — 1650
G $3440 — 3860
U L $860 — 905
C $1010 — 1055
W $1140 — 1185
M $1570 — 1650
G $3440 — 3860
NG C4 CC
ET108 C L $1000 — 1045
C $1160 — 1205
W $1340 — 1385
M $2050 — 2130
G $4460 — 4870
U L $1000 — 1045
C $1160 — 1205
W $1340 — 1385
M $2050 — 2130
G $4460 — 4870
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 47
Eames® Conference Table, Roundcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 47
NG C4 CC
ET122 C L $1270 — 1500
C $1460 — 1690
W $1640 — 1870
M $3240 — 3470
G $5780 — 6320
S L $1270 — 1500
C $1460 — 1690
W $1640 — 1870
M $3240 — 3470
G $5780 — 6320
NG C4 CC
ET123 C L $1400 — 1630
C $1600 — 1830
W $1770 — 2000
M $3320 — 3550
G $7150 — 7700
S L $1400 — 1630
C $1600 — 1830
W $1770 — 2000
M $3320 — 3550
G $7150 — 7700
NG C4 CC
ET124 S L $1740 — 1970
C $2020 — 2250
W $2150 — 2380
M $5780 — 6010
G $10050 — 10420
NG C4 CC
ET125 S L $2250 — 2480
C $2579 — 2809
W $2879 — 3109
M $5810 — 6040
G $12040 — 12520
NG C4 CC
ET126 S L $3279 4199 —
C $3629 4549 —
W $4029 4949 —
NG C4 CC
ET127 S L $3417 4337 —
C $3869 4789 —
W $4319 5239 —
NG C4 CC
ET129 S L $3859 4779 —
C $4489 5409 —
W $4989 5909 —
NG C4 CC
ET131 S L $4686 5606 —
C $5519 6439 —
W $6119 7039 —
Step 7.
Top Finish: Finish
For 30" diameter (07), 36" diameter (08), 42" diameter (22), 48"
diameter (23), 54" diameter (24), or 60" diameter (25) with back-
painted glass top (G)
8Q folkstone greyA +$0
91 whiteA +$0
BK blackA +$0
WN warm grey neutralA +$0
Top Finish: Finish
For 30" diameter (07), 36" diameter (08), 42" diameter (22), 48"
diameter (23), 54" diameter (24), or 60" diameter (25) with thin profile
HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Top Finish: Solid-Color Laminate
For 30" diameter (07), 36" diameter (08), 42" diameter (22), 48"
diameter (23), 54" diameter (24), 60" diameter (25), 66" diameter (26),
72" diameter (27), 84" diameter (29), or 96" diameter (31) with laminate
top with vinyl edge (L)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BKM black matteA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
HT inner toneA +$0
LT light toneA +$0
LU soft whiteA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Eam
es®
Tabl
es=
==
48 Eames® Tables Price Book (2/18) HermanMiller
Eames® Conference Table, Roundcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 48
Top Finish: Recut Veneer
For veneer top with vinyl edge (C)
07 08 22 23 24
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
25 26 27 29 31
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
Top Finish: Wood Veneer
For veneer top with vinyl edge (C)
07 08 22 23 24
V2 beechA +$80 80 95 130 170
2U +$105 105 130 175 230light brown
walnutA
A2 white ashA +$105 105 130 175 230
40 +$105 105 130 175 230dark brown
walnutA
ED aged cherryA +$105 105 130 175 230
EK +$105 105 130 175 230medium red
walnutA
EN ebonyA +$105 105 130 175 230
OU walnutA +$105 105 130 175 230
UL natural mapleA +$105 105 130 175 230
UX +$105 105 130 175 230walnut on cherryA
9N +$380 380 720 839 976santos palisanderA
25 26 27 29 31
V2 beechA +$250 250 250 290 330
2U +$365 365 365 425 495light brown
walnutA
A2 white ashA +$365 365 365 425 495
40 +$365 365 365 425 495dark brown
walnutA
ED aged cherryA +$365 365 365 425 495
EK +$365 365 365 425 495medium red
walnutA
EN ebonyA +$365 365 365 425 495
OU walnutA +$365 365 365 425 495
UL natural mapleA +$365 365 365 425 495
UX +$365 365 365 425 495walnut on cherryA
9N +$2044 2044 2044 2380 2782santos palisanderA
For veneer top with veneer edge (W)
07 08 22 23 24
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
25 26 27 29 31
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
For veneer top with veneer edge (W)
07 08 22 23 24
V2 beechA +$80 80 95 130 170
2U +$105 105 130 175 230light brown
walnutA
A2 white ashA +$105 105 130 175 230
40 +$105 105 130 175 230dark brown
walnutA
ED aged cherryA +$105 105 130 175 230
EK +$105 105 130 175 230medium red
walnutA
EN ebonyA +$105 105 130 175 230
OU walnutA +$105 105 130 175 230
UL natural mapleA +$105 105 130 175 230
UX +$105 105 130 175 230walnut on cherryA
9N +$380 380 720 839 976santos palisanderA
25 26 27 29 31
V2 beechA +$250 250 250 290 330
2U +$365 365 365 425 495light brown
walnutA
A2 white ashA +$365 365 365 425 495
40 +$365 365 365 425 495dark brown
walnutA
ED aged cherryA +$365 365 365 425 495
EK +$365 365 365 425 495medium red
walnutA
EN ebonyA +$365 365 365 425 495
OU walnutA +$365 365 365 425 495
UL natural mapleA +$365 365 365 425 495
UX +$365 365 365 425 495walnut on cherryA
9N +$2044 2044 2044 2380 2782santos palisanderA
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 49
Eames® Conference Table, Roundcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 49
Step 8. Edge Finish
For laminate top with vinyl edge (L) or veneer top with vinyl edge (C)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Step 9. Grommet Finish
For 30" diameter (07) or 36" diameter (08) with single center cutout (CC)
PA polished aluminumA +$0
For 42" diameter (22), 48" diameter (23), 54" diameter (24), 60"
diameter (25), 66" diameter (26), 72" diameter (27), 84" diameter (29),
or 96" diameter (31) with four cutouts (C4), or single center cutout (CC)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
Step 10. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 11. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 12. Casters/Glides
For 30" diameter (07), 36" diameter (08), 42" diameter (22), 48"
diameter (23), or 54" diameter (24) with laminate top with vinyl edge
(L), or veneer top with vinyl edge (C), or veneer top with veneer edge
(W), or thin profile HPL top with black edge (M)
G glidesA +$0
C castersA +$80
For 30" diameter (07), 36" diameter (08), 42" diameter (22), 48"
diameter (23), 54" diameter (24), 60" diameter (25), 66" diameter (26),
72" diameter (27), 84" diameter (29), or 96" diameter (31) with laminate
top with vinyl edge (L), or veneer top with vinyl edge (C), or veneer top
with veneer edge (W), or thin profile HPL top with black edge (M), or
back-painted glass top (G)
G glidesA +$0
Eam
es®
Tabl
es=
==
50 Eames® Tables Price Book (2/18) HermanMiller
Eames® Conference Table, Roundcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 50
Eames® Conference Table,Square
Product Information
Description
This table has a laminate or veneer top with vinyl edge, a veneer top
and edge, a thin-profile HPL top with black edge, or a back-painted glass
top with modified bullnose edge. Table may be specified with cutouts to
accommodate simple power options (specified separately). Each table
has adjustable glides or casters. Shipped knocked down.
Notes
Tables have a 1-piece top and single column base.
Laminate tops are 7/8" thick.
Veneer tops are 3/4" thick.
Thin profile HPL tops are 1/2" thick.
Glass tops are back-painted, with a satin etch finish to reduce the
appearance of fingerprints. Tops are 1/2" thick.
30" and 36" tables may only accommodate USB access. Single center
cutout (CC) grommet option must be specified. Grommet option is a
non-functional hole plug. For USB access, order round dual USB
charging unit (ET990.) separately.
42" and 48" tables may accommodate power. Single center cutout (CC)
grommet option must be specified. Grommet provides simple pass-
through with wire management features and a hinged lid. For power
access, order round power module (ET991.) separately.
Santos palisander veneer is celebrated for its unique grain and color
variations. Similar products ordered in multiples or dissimilar products
ordered separately should be expected to have variation in both grain
and color characteristics; no two products will look exactly alike.
Dimensions
ET104!ET105!ET106!ET148!
HermanMiller Eames® Tables Price Book (2/18) 51
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 51
Specification Information
Step 1.
ETA
Step 2. Height
1 281/2" highA
Step 3. Depth/Width
04 30" deep x 30" wideA
05 36" deep x 36" wideA
06 42" deep x 42" wideA
48 48" deep x 48" wideA
Step 4. Base
For 30" deep x 30" wide (04) or 36" deep x 36" wide (05)
C contract baseA
U universal baseA
For 42" deep x 42" wide (06) or 48" deep x 48" wide (48)
C contract baseA
Step 5. Surface Material
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
M thin profile HPL top with black edgeA
G back-painted glass topA
Step 6. Grommets
NG no grommetA
CC single center cutoutA
Prices for Steps 1-6.
NG CC
ET104 C L $860 905
C $1010 1055
W $1140 1185
M $1570 1650
G $3440 3860
U L $860 905
C $1010 1055
W $1140 1185
M $1570 1650
G $3440 3860
NG CC
ET105 C L $1000 1045
C $1160 1205
W $1340 1385
M $2050 2130
G $4460 4870
U L $1000 1045
C $1160 1205
W $1340 1385
M $2050 2130
G $4460 4870
NG CC
ET106 C L $1270 1500
C $1460 1690
W $1640 1870
M $3240 3470
G $5780 6320
NG CC
ET148 C L $1400 1630
C $1600 1830
W $1770 2000
M $3320 3550
G $7150 7700
Step 7.
Top Finish: Finish
For back-painted glass top (G)
8Q folkstone greyA +$0
91 whiteA +$0
BK blackA +$0
WN warm grey neutralA +$0
Top Finish: Finish
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Eam
es®
Tabl
es=
==
52 Eames® Tables Price Book (2/18) HermanMiller
Eames® Conference Table, Squarecontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 52
Top Finish: Solid-Color Laminate
For laminate top with vinyl edge (L)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BKM black matteA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
HT inner toneA +$0
LT light toneA +$0
LU soft whiteA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Top Finish: Recut Veneer
For veneer top with vinyl edge (C)
04 05 06 48
RA light ashA +$0 0 0 0
RK mahogany darkA +$0 0 0 0
RM mahoganyA +$0 0 0 0
Top Finish: Wood Veneer
For veneer top with vinyl edge (C)
04 05 06 48
A2 white ashA +$105 105 130 175
EN ebonyA +$105 105 130 175
OU walnutA +$105 105 130 175
9N santos palisanderA +$380 380 720 839
V2 beechA +$80 80 95 130
2U light brown walnutA +$105 105 130 175
40 dark brown walnutA +$105 105 130 175
ED aged cherryA +$105 105 130 175
EK medium red walnutA +$105 105 130 175
UL natural mapleA +$105 105 130 175
UX walnut on cherryA +$105 105 130 175
For veneer top with veneer edge (W)
04 05 06 48
RA light ashA +$0 0 0 0
RK mahogany darkA +$0 0 0 0
RM mahoganyA +$0 0 0 0
For veneer top with veneer edge (W)
04 05 06 48
2U light brown walnutA +$105 105 130 175
40 dark brown walnutA +$105 105 130 175
9N santos palisanderA +$380 380 720 839
A2 white ashA +$105 105 130 175
ED aged cherryA +$105 105 130 175
EK medium red walnutA +$105 105 130 175
EN ebonyA +$105 105 130 175
OU walnutA +$105 105 130 175
UL natural mapleA +$105 105 130 175
UX walnut on cherryA +$105 105 130 175
V2 beechA +$80 80 95 130
Step 8. Edge Finish
For laminate top with vinyl edge (L) or veneer top with vinyl edge (C)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Step 9. Grommet Finish
For 30" deep x 30" wide (04) or 36" deep x 36" wide (05) with single
center cutout (CC)
PA polished aluminumA +$0
For 42" deep x 42" wide (06) or 48" deep x 48" wide (48) with single
center cutout (CC)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 53
Eames® Conference Table, Squarecontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 53
Step 10. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 11. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 12. Casters/Glides
For laminate top with vinyl edge (L), veneer top with vinyl edge (C),
veneer top with veneer edge (W), or thin profile HPL top with black edge
(M)
G glidesA +$0
C castersA +$80
For back-painted glass top (G)
G glidesA +$0
Eam
es®
Tabl
es=
==
54 Eames® Tables Price Book (2/18) HermanMiller
Eames® Conference Table, Squarecontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 54
Eames® Conference Table,Rectangular
Product Information
Description
This segmented base table has a laminate or veneer top with vinyl edge,
a veneer top and edge, a thin-profile HPL top with black edge, or a back-
painted glass top with modified bullnose edge. Table may be specified
with cutouts to accommodate simple power options (specified
separately). Each table has adjustable glides or casters. Shipped
knocked down.
Notes
60"-wide to 96"-wide tables have a 1-piece top and 2-column segmented
base. 60"-deep tables have a dual run of columns.
For veneer tables, 108"-wide to 192"-wide tops are shipped in 2 equal
pieces; 216"-wide and 264"-wide tops are shipped in 3 equal pieces.
For laminate tables, 108"-wide tables have a 1-piece top; 120"-wide to
216"-wide tops are shipped in 2 equal pieces; 240"-wide and 264"-wide
tops are shipped in 3 equal pieces.
Laminate and veneer tops are 11/4" thick.
Thin profile HPL tops are 1/2" thick.
Glass tops are back-painted, with a satin etch finish to reduce the
appearance of fingerprints. Tops up to 42"×78" are 1/2" thick; tops
42"×84" to 60"×120" are 3/8" thick with a Formcoat® substructure.
Tables may be specified with cutouts for power in various
configurations. Round cutouts align with columns, and oval cutouts are
centered between columns.
Order the following compatible power components separately:
• Round power module (ET991.)
• Oval power module (ET992.)
• Pair of oval power modules (ET993.)
• Oval power module & undermount power (ET994.)
• Pair of oval power modules & undermount power (ET995.)
Santos palisander veneer is celebrated for its unique grain and color
variations. Similar products ordered in multiples or dissimilar products
ordered separately should be expected to have variation in both grain
and color characteristics; no two products will look exactly alike.
Dimensions
ET142!ET143!ET144!ET145!ET147!ET150!ET151!ET152!ET154!
ET155!ET156!ET157!ET158!ET160!ET161!ET162!ET164!ET166!
ET168!ET170!ET171!ET172!ET173!ET174!ET175!ET176!ET177!
ET178!ET187!ET188!ET189!
HermanMiller Eames® Tables Price Book (2/18) 55
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 55
Specification Information
Step 1.
ETA
Step 2. Height
1 281/2" highA
Step 3. Depth/Width
87R 30" deep x 60" wideA
88R 30" deep x 72" wideA
42R 36" deep x 60" wideA
43R 36" deep x 72" wideA
44R 36" deep x 84" wideA
89R 36" deep x 96" wideA
50R 42" deep x 66" wideA
51R 42" deep x 72" wideA
52R 42" deep x 78" wideA
45R 42" deep x 84" wideA
54R 48" deep x 84" wideA
47R 48" deep x 96" wideA
55R 54" deep x 90" wideA
56R 54" deep x 96" wideA
57R 54" deep x 108" wideA
58R 54" deep x 120" wideA
60R 54" deep x 144" wideA
61R 54" deep x 156" wideA
62R 54" deep x 168" wideA
64R 54" deep x 192" wideA
66R 54" deep x 216" wideA
68R 54" deep x 240" wideA
70R 54" deep x 264" wideA
71R 60" deep x 120" wideA
72R 60" deep x 144" wideA
73R 60" deep x 156" wideA
74R 60" deep x 168" wideA
75R 60" deep x 192" wideA
76R 60" deep x 216" wideA
77R 60" deep x 240" wideA
78R 60" deep x 264" wideA
Step 4. Base
S segmented baseA
Step 5. Surface Material
For 30" deep x 60" wide (87R), 30" deep x 72" wide (88R), 36" deep x
60" wide (42R), 36" deep x 72" wide (43R), 36" deep x 84" wide (44R),
36" deep x 96" wide (89R), 42" deep x 66" wide (50R), 42" deep x 72"
wide (51R), 42" deep x 78" wide (52R), 42" deep x 84" wide (45R), 48"
deep x 84" wide (54R), 48" deep x 96" wide (47R), 54" deep x 90" wide
(55R), or 54" deep x 96" wide (56R)
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
M thin profile HPL top with black edgeA
G back-painted glass topA
For 54" deep x 108" wide (57R), 54" deep x 120" wide (58R), or 60"
deep x 120" wide (71R)
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
G back-painted glass topA
For 54" deep x 144" wide (60R), 54" deep x 156" wide (61R), 54" deep x
168" wide (62R), 54" deep x 192" wide (64R), 54" deep x 216" wide
(66R), 54" deep x 240" wide (68R), 54" deep x 264" wide (70R), 60"
deep x 144" wide (72R), 60" deep x 156" wide (73R), 60" deep x 168"
wide (74R), 60" deep x 192" wide (75R), 60" deep x 216" wide (76R), 60"
deep x 240" wide (77R), or 60" deep x 264" wide (78R)
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
Step 6. Grommets
For 30" deep x 60" wide (87R), 30" deep x 72" wide (88R), 36" deep x
60" wide (42R), 36" deep x 72" wide (43R), 36" deep x 84" wide (44R),
36" deep x 96" wide (89R), 42" deep x 66" wide (50R), 42" deep x 72"
wide (51R), 42" deep x 78" wide (52R), 42" deep x 84" wide (45R), 48"
deep x 84" wide (54R), 48" deep x 96" wide (47R), 54" deep x 90" wide
(55R), 54" deep x 96" wide (56R), or 54" deep x 108" wide (57R)
NG no grommetA
C2 2 round cutouts, over columnsA
CR single centered oval cutoutA
CA 2 round cutouts and center oval cutoutA
Eam
es®
Tabl
es=
==
56 Eames® Tables Price Book (2/18) HermanMiller
Eames® Conference Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 56
For 54" deep x 120" wide (58R), 54" deep x 144" wide (60R), 54" deep x
156" wide (61R), 54" deep x 168" wide (62R), 60" deep x 120" wide
(71R), 60" deep x 144" wide (72R), 60" deep x 156" wide (73R), or 60"
deep x 168" wide (74R)
NG no grommetA
C2 2 round cutouts, over columnsA
CM 2 oval cutoutsA
CB 2 round cutouts and 2 oval cutoutsA
For 54" deep x 192" wide (64R) or 60" deep x 192" wide (75R)
NG no grommetA
C2 2 round cutouts, over columnsA
CP 3 oval cutoutsA
CE 2 round cutouts and 3 oval cutoutsA
For 54" deep x 216" wide (66R), 54" deep x 240" wide (68R), 54" deep x
264" wide (70R), 60" deep x 216" wide (76R), 60" deep x 240" wide
(77R), or 60" deep x 264" wide (78R)
NG no grommetA
C3 3 round cutouts, over columnsA
CN 4 oval cutoutsA
CD 3 round cutouts and 4 oval cutoutsA
Prices for Steps 1-6.
NG C2 C3 CM CN CP
ET187R S L $1661 2121 — — — —
C $2040 2500 — — — —
W $2200 2660 — — — —
M $3180 3640 — — — —
G $6650 7430 — — — —
CR CA CB CD CE
ET187R S L $1891 2351 — — —
C $2270 2730 — — —
W $2430 2890 — — —
M $3410 3870 — — —
G $7470 8260 — — —
NG C2 C3 CM CN CP
ET188R S L $1782 2242 — — — —
C $2220 2680 — — — —
W $2460 2920 — — — —
M $3200 3660 — — — —
G $7500 8290 — — — —
CR CA CB CD CE
ET188R S L $2012 2472 — — —
C $2450 2910 — — —
W $2690 3150 — — —
M $3430 3890 — — —
G $8320 9110 — — —
NG C2 C3 CM CN CP
ET142R S L $1879 2339 — — — —
C $2270 2730 — — — —
W $2464 2924 — — — —
M $3860 4320 — — — —
G $7500 8290 — — — —
CR CA CB CD CE
ET142R S L $2109 2569 — — —
C $2500 2960 — — —
W $2694 3154 — — —
M $4090 4550 — — —
G $8320 9110 — — —
NG C2 C3 CM CN CP
ET143R S L $1926 2386 — — — —
C $2340 2800 — — — —
W $2570 3030 — — — —
M $3880 4340 — — — —
G $8520 9300 — — — —
CR CA CB CD CE
ET143R S L $2156 2616 — — —
C $2570 3030 — — —
W $2800 3260 — — —
M $4110 4570 — — —
G $9340 10130 — — —
NG C2 C3 CM CN CP
ET144R S L $2014 2474 — — — —
C $2520 2980 — — — —
W $2810 3270 — — — —
M $3910 4370 — — — —
G $9530 10320 — — — —
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 57
Eames® Conference Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 57
CR CA CB CD CE
ET144R S L $2244 2704 — — —
C $2750 3210 — — —
W $3040 3500 — — —
M $4140 4600 — — —
G $10360 11140 — — —
NG C2 C3 CM CN CP
ET189R S L $2157 2617 — — — —
C $2680 3140 — — — —
W $2890 3350 — — — —
M $3930 4390 — — — —
G $10620 11410 — — — —
CR CA CB CD CE
ET189R S L $2387 2847 — — —
C $2910 3370 — — —
W $3120 3580 — — —
M $4160 4620 — — —
G $11450 12230 — — —
NG C2 C3 CM CN CP
ET150R S L $2249 2709 — — — —
C $2610 3070 — — — —
W $2940 3400 — — — —
M $3890 4350 — — — —
G $8920 9710 — — — —
CR CA CB CD CE
ET150R S L $2479 2939 — — —
C $2840 3300 — — —
W $3170 3630 — — —
M $4120 4580 — — —
G $9750 10530 — — —
NG C2 C3 CM CN CP
ET151R S L $2317 2777 — — — —
C $2646 3106 — — — —
W $2967 3427 — — — —
M $3900 4360 — — — —
G $9530 10320 — — — —
CR CA CB CD CE
ET151R S L $2547 3007 — — —
C $2876 3336 — — —
W $3197 3657 — — —
M $4130 4590 — — —
G $10360 11140 — — —
NG C2 C3 CM CN CP
ET152R S L $2366 2826 — — — —
C $2769 3229 — — — —
W $3069 3529 — — — —
M $6280 6740 — — — —
G $10150 10930 — — — —
CR CA CB CD CE
ET152R S L $2596 3056 — — —
C $2999 3459 — — —
W $3299 3759 — — —
M $6510 6970 — — —
G $10970 11760 — — —
NG C2 C3 CM CN CP
ET145R S L $2394 2854 — — — —
C $2798 3258 — — — —
W $3104 3564 — — — —
M $6280 6740 — — — —
G $11100 12420 — — — —
CR CA CB CD CE
ET145R S L $2624 3084 — — —
C $3028 3488 — — —
W $3334 3794 — — —
M $6510 6970 — — —
G $12280 13610 — — —
NG C2 C3 CM CN CP
ET154R S L $2694 3154 — — — —
C $3109 3569 — — — —
W $3409 3869 — — — —
M $6300 6760 — — — —
G $12490 13820 — — — —
Eam
es®
Tabl
es=
==
58 Eames® Tables Price Book (2/18) HermanMiller
Eames® Conference Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 58
CR CA CB CD CE
ET154R S L $2924 3384 — — —
C $3339 3799 — — —
W $3639 4099 — — —
M $6530 6990 — — —
G $13680 15000 — — —
NG C2 C3 CM CN CP
ET147R S L $2753 3213 — — — —
C $3173 3633 — — — —
W $3523 3983 — — — —
M $6330 6790 — — — —
G $14090 15440 — — — —
CR CA CB CD CE
ET147R S L $2983 3443 — — —
C $3403 3863 — — —
W $3753 4213 — — —
M $6560 7020 — — —
G $15280 16600 — — —
NG C2 C3 CM CN CP
ET155R S L $3265 3725 — — — —
C $3708 4168 — — — —
W $4108 4568 — — — —
M $6330 6790 — — — —
G $14780 16110 — — — —
CR CA CB CD CE
ET155R S L $3495 3955 — — —
C $3938 4398 — — —
W $4338 4798 — — —
M $6560 7020 — — —
G $16040 17300 — — —
NG C2 C3 CM CN CP
ET156R S L $3306 3766 — — — —
C $3828 4288 — — — —
W $4278 4738 — — — —
M $6350 6810 — — — —
G $15680 17010 — — — —
CR CA CB CD CE
ET156R S L $3536 3996 — — —
C $4058 4518 — — —
W $4508 4968 — — —
M $6580 7040 — — —
G $16870 18200 — — —
NG C2 C3 CM CN CP
ET157R S L $4301 4761 — — — —
C $4794 5254 — — — —
W $5319 5779 — — — —
G $17480 18810 — — — —
CR CA CB CD CE
ET157R S L $4531 4991 — — —
C $5024 5484 — — —
W $5549 6009 — — —
G $18670 20000 — — —
NG C2 C3 CM CN CP
ET158R S L $4784 5244 — 5244 — —
C $5374 5834 — 5834 — —
W $5974 6434 — 6434 — —
G $19900 21220 — 21270 — —
CR CA CB CD CE
ET158R S L — — $5704 — —
C — — $6294 — —
W — — $6894 — —
G — —$22600 — —
NG C2 C3 CM CN CP
ET160R S L $5183 5643 — 5643 — —
C $5791 6251 — 6251 — —
W $6491 6951 — 6951 — —
CR CA CB CD CE
ET160R S L — — $6103 — —
C — — $6711 — —
W — — $7411 — —
NG C2 C3 CM CN CP
ET161R S L $5633 6093 — 6093 — —
C $6264 6724 — 6724 — —
W $7039 7499 — 7499 — —
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 59
Eames® Conference Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 59
CR CA CB CD CE
ET161R S L — — $6553 — —
C — — $7184 — —
W — — $7959 — —
NG C2 C3 CM CN CP
ET162R S L $6172 6632 — 6632 — —
C $6901 7361 — 7361 — —
W $7751 8211 — 8211 — —
CR CA CB CD CE
ET162R S L — — $7092 — —
C — — $7821 — —
W — — $8671 — —
NG C2 C3 CM CN CP
ET164R S L $6814 7274 — — — 7504
C $7717 8177 — — — 8407
W $8667 9127 — — — 9357
CR CA CB CD CE
ET164R S L — — — — $7964
C — — — — $8867
W — — — — $9817
NG C2 C3 CM CN CP
ET166R S L $7506 — 8196 — 8426 —
C $8440 — 9130 — 9360 —
W $9490 — 10180 — 10410 —
CR CA CB CD CE
ET166R S L — — — $9116 —
C — — — $10050 —
W — — — $11100 —
NG C2 C3 CM CN CP
ET168R S L $8280 — 8970 — 9200 —
C $9252 — 9942 — 10172 —
W $10402 — 11092 — 11322 —
CR CA CB CD CE
ET168R S L — — — $9890 —
C — — — $10862 —
W — — — $12012 —
NG C2 C3 CM CN CP
ET170R S L $9033 — 9723 — 9953 —
C $10185 — 10875 — 11105 —
W $11435 — 12125 — 12355 —
CR CA CB CD CE
ET170R S L — — — $10643 —
C — — — $11795 —
W — — — $13045 —
NG C2 C3 CM CN CP
ET171R S L $8900 9360 — 9360 — —
C $10900 11360 — 11360 — —
W $11600 12060 — 12060 — —
G $24430 25750 — 25800 — —
CR CA CB CD CE
ET171R S L — — $9820 — —
C — — $11820 — —
W — — $12520 — —
G — — $27130 — —
NG C2 C3 CM CN CP
ET172R S L $9299 9759 — 9759 — —
C $11500 11960 — 11960 — —
W $12300 12760 — 12760 — —
CR CA CB CD CE
ET172R S L — — $10219 — —
C — — $12420 — —
W — — $13220 — —
NG C2 C3 CM CN CP
ET173R S L $9599 10059 — 10059 — —
C $12000 12460 — 12460 — —
W $12875 13335 — 13335 — —
CR CA CB CD CE
ET173R S L — — $10519 — —
C — — $12920 — —
W — — $13795 — —
NG C2 C3 CM CN CP
ET174R S L $9999 10459 — 10459 — —
C $12600 13060 — 13060 — —
W $13550 14010 — 14010 — —
Eam
es®
Tabl
es=
==
60 Eames® Tables Price Book (2/18) HermanMiller
Eames® Conference Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 60
CR CA CB CD CE
ET174R S L — — $10919 — —
C — — $13520 — —
W — — $14470 — —
NG C2 C3 CM CN CP
ET175R S L $11800 12260 — — — 12490
C $16800 17260 — — — 17490
W $17850 18310 — — — 18540
CR CA CB CD CE
ET175R S L — — — — $12950
C — — — — $17950
W — — — — $19000
NG C2 C3 CM CN CP
ET176R S L $14300 — 14990 — 15220 —
C $20900 — 21590 — 21820 —
W $22050 — 22740 — 22970 —
CR CA CB CD CE
ET176R S L — — — $15910 —
C — — — $22510 —
W — — —$23660 —
NG C2 C3 CM CN CP
ET177R S L $15600 — 16290 — 16520 —
C $22300 — 22990 — 23220 —
W $23550 — 24240 — 24470 —
CR CA CB CD CE
ET177R S L — — — $17210 —
C — — — $23910 —
W — — — $25160 —
NG C2 C3 CM CN CP
ET178R S L $15900 — 16590 — 16820 —
C $23200 — 23890 — 24120 —
W $24550 — 25240 — 25470 —
CR CA CB CD CE
ET178R S L — — — $17510 —
C — — — $24810 —
W — — — $26160 —
Step 7.
Top Finish: Top Finish
For back-painted glass top (G)
8Q folkstone greyA +$0
91 whiteA +$0
BK blackA +$0
WN warm grey neutralA +$0
Top Finish: Top Finish
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Top Finish: Solid-Color Laminate
For laminate top with vinyl edge (L)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BKM black matteA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
HT inner toneA +$0
LT light toneA +$0
LU soft whiteA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
For veneer top with vinyl edge (C)
87R 88R 42R 43R 44R
2U +$250 265 265 290 305light brown
walnutA
40 +$250 265 265 290 305dark brown
walnutA
9N +$950 1009 1009 1104 1161santos palisanderA
A2 white ashA +$250 265 265 290 305
ED aged cherryA +$250 265 265 290 305
EK +$250 265 265 290 305medium red
walnutA
EN ebonyA +$250 265 265 290 305
OU walnutA +$250 265 265 290 305
UL natural mapleA +$250 265 265 290 305
UX +$250 265 265 290 305walnut on cherryA
V2 beechA +$190 205 205 215 225
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 61
Eames® Conference Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 61
89R 50R 51R 52R 45R
2U +$330 290 305 330 330light brown
walnutA
40 +$330 290 305 330 330dark brown
walnutA
9N +$1420 1160 1220 1320 1320santos palisanderA
A2 white ashA +$330 290 305 330 330
ED aged cherryA +$330 290 305 330 330
EK +$330 290 305 330 330medium red
walnutA
EN ebonyA +$330 290 305 330 330
OU walnutA +$330 290 305 330 330
UL natural mapleA +$330 290 305 330 330
UX +$330 290 305 330 330walnut on cherryA
V2 beechA +$245 215 225 245 245
54R 47R 55R 56R 57R
2U +$385 385 425 440 500light brown
walnutA
40 +$385 385 425 440 500dark brown
walnutA
9N +$1656 1656 1700 1760 2350santos palisanderA
A2 white ashA +$385 385 425 440 500
ED aged cherryA +$385 385 425 440 500
EK +$385 385 425 440 500medium red
walnutA
EN ebonyA +$385 385 425 440 500
OU walnutA +$385 385 425 440 500
UL natural mapleA +$385 385 425 440 500
UX +$385 385 425 440 500walnut on cherryA
V2 beechA +$280 280 290 315 345
58R 60R 61R 62R 64R
2U +$540 585 635 690 755light brown
walnutA
40 +$540 585 635 690 755dark brown
walnutA
9N +$2538 2750 3175 3450 3775santos palisanderA
A2 white ashA +$540 585 635 690 755
ED aged cherryA +$540 585 635 690 755
EK +$540 585 635 690 755medium red
walnutA
EN ebonyA +$540 585 635 690 755
OU walnutA +$540 585 635 690 755
UL natural mapleA +$540 585 635 690 755
UX +$540 585 635 690 755walnut on cherryA
V2 beechA +$375 410 445 480 520
66R 68R 70R 71R 72R
2U +$815 880 950 680 740light brown
walnutA
40 +$815 880 950 680 740dark brown
walnutA
9N +$4075 4400 5320 3180 3440santos palisanderA
A2 white ashA +$815 880 950 680 740
ED aged cherryA +$815 880 950 680 740
EK +$815 880 950 680 740medium red
walnutA
EN ebonyA +$815 880 950 680 740
OU walnutA +$815 880 950 680 740
UL natural mapleA +$815 880 950 680 740
UX +$815 880 950 680 740walnut on cherryA
V2 beechA +$560 600 650 470 520
73R 74R 75R 76R 77R
2U +$800 870 950 950 1100light brown
walnutA
40 +$800 870 950 950 1100dark brown
walnutA
9N +$3970 4320 5100 5100 5500santos palisanderA
A2 white ashA +$800 870 950 950 1100
ED aged cherryA +$800 870 950 950 1100
EK +$800 870 950 950 1100medium red
walnutA
EN ebonyA +$800 870 950 950 1100
OU walnutA +$800 870 950 950 1100
UL natural mapleA +$800 870 950 950 1100
UX +$800 870 950 950 1100walnut on cherryA
V2 beechA +$560 600 650 650 750
78R
2U light brown walnutA +$1100
40 dark brown walnutA +$1100
9N santos palisanderA +$5500
A2 white ashA +$1100
ED aged cherryA +$1100
EK medium red walnutA +$1100
EN ebonyA +$1100
OU walnutA +$1100
UL natural mapleA +$1100
UX walnut on cherryA +$1100
V2 beechA +$750
Eam
es®
Tabl
es=
==
62 Eames® Tables Price Book (2/18) HermanMiller
Eames® Conference Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 62
Top Finish: Recut Veneer
For veneer top with vinyl edge (C)
87R 88R 42R 43R 44R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
89R 50R 51R 52R 45R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
54R 47R 55R 56R 57R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
58R 60R 61R 62R 64R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
66R 68R 70R 71R 72R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
73R 74R 75R 76R 77R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
78R
RA light ashA +$0
RK mahogany darkA +$0
RM mahoganyA +$0
For veneer top with veneer edge (W)
87R 88R 42R 43R 44R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
89R 50R 51R 52R 45R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
54R 47R 55R 56R 57R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
58R 60R 61R 62R 64R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
66R 68R 70R 71R 72R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
73R 74R 75R 76R 77R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
78R
RA light ashA +$0
RK mahogany darkA +$0
RM mahoganyA +$0
For veneer top with veneer edge (W)
87R 88R 42R 43R 44R
2U +$250 265 265 290 305light brown
walnutA
40 +$250 265 265 290 305dark brown
walnutA
9N +$950 1009 1009 1104 1161santos palisanderA
A2 white ashA +$250 265 265 290 305
ED aged cherryA +$250 265 265 290 305
EK +$250 265 265 290 305medium red
walnutA
EN ebonyA +$250 265 265 290 305
OU walnutA +$250 265 265 290 305
UL natural mapleA +$250 265 265 290 305
UX +$250 265 265 290 305walnut on cherryA
V2 beechA +$190 205 205 215 225
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 63
Eames® Conference Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 63
89R 50R 51R 52R 45R
2U +$330 290 305 330 330light brown
walnutA
40 +$330 290 305 330 330dark brown
walnutA
9N +$1420 1160 1220 1320 1320santos palisanderA
A2 white ashA +$330 290 305 330 330
ED aged cherryA +$330 290 305 330 330
EK +$330 290 305 330 330medium red
walnutA
EN ebonyA +$330 290 305 330 330
OU walnutA +$330 290 305 330 330
UL natural mapleA +$330 290 305 330 330
UX +$330 290 305 330 330walnut on cherryA
V2 beechA +$245 215 225 245 245
54R 47R 55R 56R 57R
2U +$385 385 425 440 500light brown
walnutA
40 +$385 385 425 440 500dark brown
walnutA
9N +$1656 1656 1700 1760 2350santos palisanderA
A2 white ashA +$385 385 425 440 500
ED aged cherryA +$385 385 425 440 500
EK +$385 385 425 440 500medium red
walnutA
EN ebonyA +$385 385 425 440 500
OU walnutA +$385 385 425 440 500
UL natural mapleA +$385 385 425 440 500
UX +$385 385 425 440 500walnut on cherryA
V2 beechA +$280 280 290 315 345
58R 60R 61R 62R 64R
2U +$540 585 635 690 755light brown
walnutA
40 +$540 585 635 690 755dark brown
walnutA
9N +$2538 2750 3175 3450 3775santos palisanderA
A2 white ashA +$540 585 635 690 755
ED aged cherryA +$540 585 635 690 755
EK +$540 585 635 690 755medium red
walnutA
EN ebonyA +$540 585 635 690 755
OU walnutA +$540 585 635 690 755
UL natural mapleA +$540 585 635 690 755
UX +$540 585 635 690 755walnut on cherryA
V2 beechA +$375 410 445 480 520
66R 68R 70R 71R 72R
2U +$815 880 950 680 740light brown
walnutA
40 +$815 880 950 680 740dark brown
walnutA
9N +$4075 4400 5320 3180 3440santos palisanderA
A2 white ashA +$815 880 950 680 740
ED aged cherryA +$815 880 950 680 740
EK +$815 880 950 680 740medium red
walnutA
EN ebonyA +$815 880 950 680 740
OU walnutA +$815 880 950 680 740
UL natural mapleA +$815 880 950 680 740
UX +$815 880 950 680 740walnut on cherryA
V2 beechA +$560 600 650 470 520
73R 74R 75R 76R 77R
2U +$800 870 950 950 1100light brown
walnutA
40 +$800 870 950 950 1100dark brown
walnutA
9N +$3970 4320 5100 5100 5500santos palisanderA
A2 white ashA +$800 870 950 950 1100
ED aged cherryA +$800 870 950 950 1100
EK +$800 870 950 950 1100medium red
walnutA
EN ebonyA +$800 870 950 950 1100
OU walnutA +$800 870 950 950 1100
UL natural mapleA +$800 870 950 950 1100
UX +$800 870 950 950 1100walnut on cherryA
V2 beechA +$560 600 650 650 750
78R
2U light brown walnutA +$1100
40 dark brown walnutA +$1100
9N santos palisanderA +$5500
A2 white ashA +$1100
ED aged cherryA +$1100
EK medium red walnutA +$1100
EN ebonyA +$1100
OU walnutA +$1100
UL natural mapleA +$1100
UX walnut on cherryA +$1100
V2 beechA +$750
Eam
es®
Tabl
es=
==
64 Eames® Tables Price Book (2/18) HermanMiller
Eames® Conference Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 64
Step 8. Edge Finish
For laminate top with vinyl edge (L) or veneer top with vinyl edge (C)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Step 9. Grommet Finish
For 2 round cutouts, over columns (C2) or 3 round cutouts, over
columns (C3)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
For single centered oval cutout (CR) or 2 round cutouts and center oval
cutout (CA)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$150
For 2 oval cutouts (CM) or 2 round cutouts and 2 oval cutouts (CB)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$300
For 3 oval cutouts (CP) or 2 round cutouts and 3 oval cutouts (CE)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$450
For 4 oval cutouts (CN) or 3 round cutouts and 4 oval cutouts (CD)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
PA polished aluminumA +$600
Step 10. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 11. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 12. Casters/Glides
For 30" deep x 60" wide (87R), 30" deep x 72" wide (88R), 36" deep x
60" wide (42R), 36" deep x 72" wide (43R), 36" deep x 84" wide (44R),
36" deep x 96" wide (89R), 42" deep x 66" wide (50R), 42" deep x 72"
wide (51R), 42" deep x 78" wide (52R), 42" deep x 84" wide (45R), 48"
deep x 84" wide (54R), or 48" deep x 96" wide (47R) with laminate top
with vinyl edge (L), or veneer top with vinyl edge (C), or veneer top with
veneer edge (W), or thin profile HPL top with black edge (M)
G glidesA +$0
C castersA +$80
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 65
Eames® Conference Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 65
For 54" deep x 108" wide (57R), 54" deep x 120" wide (58R), 54" deep x
144" wide (60R), 54" deep x 156" wide (61R), 54" deep x 168" wide
(62R), 54" deep x 192" wide (64R), 54" deep x 216" wide (66R), 54"
deep x 240" wide (68R), 54" deep x 264" wide (70R), 60" deep x 120"
wide (71R), 60" deep x 144" wide (72R), 60" deep x 156" wide (73R), 60"
deep x 168" wide (74R), 60" deep x 192" wide (75R), 60" deep x 216"
wide (76R), 60" deep x 240" wide (77R), or 60" deep x 264" wide (78R)
with laminate top with vinyl edge (L), or veneer top with vinyl edge (C),
or veneer top with veneer edge (W)
G glidesA +$0
For 30" deep x 60" wide (87R), 30" deep x 72" wide (88R), 36" deep x
60" wide (42R), 36" deep x 72" wide (43R), 36" deep x 84" wide (44R),
36" deep x 96" wide (89R), 42" deep x 66" wide (50R), 42" deep x 72"
wide (51R), 42" deep x 78" wide (52R), 42" deep x 84" wide (45R), 48"
deep x 84" wide (54R), 48" deep x 96" wide (47R), 54" deep x 90" wide
(55R), 54" deep x 96" wide (56R), 54" deep x 108" wide (57R), 54"
deep x 120" wide (58R), or 60" deep x 120" wide (71R) with back-painted
glass top (G)
G glidesA +$0
For 54" deep x 90" wide (55R) or 54" deep x 96" wide (56R) with
laminate top with vinyl edge (L), or veneer top with vinyl edge (C), or
veneer top with veneer edge (W), or thin profile HPL top with black edge
(M)
G glidesA +$0
Eam
es®
Tabl
es=
==
66 Eames® Tables Price Book (2/18) HermanMiller
Eames® Conference Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 66
Eames® Conference Table, Oval
Product Information
Description
This segmented base table has a laminate or veneer top with vinyl edge,
a veneer top and edge, a thin-profile HPL top with black edge, or a back-
painted glass top with modified bullnose edge. Table may be specified
with cutouts to accommodate simple power options (specified
separately). Each table has adjustable glides or casters. Shipped
knocked down.
Notes
60"-wide to 96"-wide tables have a 1-piece top and 2-column segmented
base. 60"-deep tables have a dual run of columns.
For veneer tables, 108"-wide to 192"-wide tops are shipped in 2 equal
pieces; 216"-wide and 264"-wide tops are shipped in 3 equal pieces.
For laminate tables, 108"-wide tables have a 1-piece top; 120"-wide to
216"-wide tops are shipped in 2 equal pieces; 240"-wide and 264"-wide
tops are shipped in 3 equal pieces.
Laminate and veneer tops are 11/4" thick.
Thin profile HPL tops are 1/2" thick.
Glass tops are back-painted, with a satin etch finish to reduce the
appearance of fingerprints. Tops up to 42"×78" are 1/2" thick; tops
42"×84" to 60"×120" are 3/8" thick with a Formcoat® substructure.
Tables may be specified with cutouts for power in various
configurations. Round cutouts align with columns, and oval cutouts are
centered between columns.
Order the following compatible power components separately:
• Round power module (ET991.)
• Oval power module (ET992.)
• Pair of oval power modules (ET993.)
• Oval power module & undermount power (ET994.)
• Pair of oval power modules & undermount power (ET995.)
Santos palisander veneer is celebrated for its unique grain and color
variations. Similar products ordered in multiples or dissimilar products
ordered separately should be expected to have variation in both grain
and color characteristics; no two products will look exactly alike.
Dimensions
ET143!ET144!ET147!ET149!ET150!ET151!ET152!ET153!ET154!
ET155!ET156!ET157!ET158!ET160!ET161!ET162!ET164!ET166!
ET168!ET170!ET171!ET172!ET173!ET174!ET175!ET176!ET177!
ET178!ET187!ET188!ET189!
HermanMiller Eames® Tables Price Book (2/18) 67
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 67
Specification Information
Step 1.
ETA
Step 2. Height
1 281/2" highA
Step 3. Depth/Width
87V 30" deep x 60" wideA
88V 30" deep x 72" wideA
49V 36" deep x 60" wideA
43V 36" deep x 72" wideA
44V 36" deep x 84" wideA
89V 36" deep x 96" wideA
50V 42" deep x 66" wideA
51V 42" deep x 72" wideA
52V 42" deep x 78" wideA
53V 42" deep x 84" wideA
54V 48" deep x 84" wideA
47V 48" deep x 96" wideA
55V 54" deep x 90" wideA
56V 54" deep x 96" wideA
57V 54" deep x 108" wideA
58V 54" deep x 120" wideA
60V 54" deep x 144" wideA
61V 54" deep x 156" wideA
62V 54" deep x 168" wideA
64V 54" deep x 192" wideA
66V 54" deep x 216" wideA
68V 54" deep x 240" wideA
70V 54" deep x 264" wideA
71V 60" deep x 120" wideA
72V 60" deep x 144" wideA
73V 60" deep x 156" wideA
74V 60" deep x 168" wideA
75V 60" deep x 192" wideA
76V 60" deep x 216" wideA
77V 60" deep x 240" wideA
78V 60" deep x 264" wideA
Step 4. Base
S segmented baseA
Step 5. Surface Material
For 30" deep x 60" wide (87V), 30" deep x 72" wide (88V), 36" deep x
60" wide (49V), 36" deep x 72" wide (43V), 36" deep x 84" wide (44V),
36" deep x 96" wide (89V), 42" deep x 66" wide (50V), 42" deep x 72"
wide (51V), 42" deep x 78" wide (52V), 42" deep x 84" wide (53V), 48"
deep x 84" wide (54V), 48" deep x 96" wide (47V), 54" deep x 90" wide
(55V), or 54" deep x 96" wide (56V)
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
M thin profile HPL top with black edgeA
G back-painted glass topA
For 54" deep x 108" wide (57V), 54" deep x 120" wide (58V), or 60"
deep x 120" wide (71V)
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
G back-painted glass topA
For 54" deep x 144" wide (60V), 54" deep x 156" wide (61V), 54" deep x
168" wide (62V), 54" deep x 192" wide (64V), 54" deep x 216" wide
(66V), 54" deep x 240" wide (68V), 54" deep x 264" wide (70V), 60"
deep x 144" wide (72V), 60" deep x 156" wide (73V), 60" deep x 168"
wide (74V), 60" deep x 192" wide (75V), 60" deep x 216" wide (76V),
60" deep x 240" wide (77V), or 60" deep x 264" wide (78V)
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
Step 6. Grommets
For 30" deep x 60" wide (87V), 30" deep x 72" wide (88V), 36" deep x
60" wide (49V), 36" deep x 72" wide (43V), 36" deep x 84" wide (44V),
36" deep x 96" wide (89V), 42" deep x 66" wide (50V), 42" deep x 72"
wide (51V), 42" deep x 78" wide (52V), 42" deep x 84" wide (53V), 48"
deep x 84" wide (54V), 48" deep x 96" wide (47V), 54" deep x 90" wide
(55V), 54" deep x 96" wide (56V), or 54" deep x 108" wide (57V)
NG no grommetA
C2 2 round cutouts, over columnsA
CR single centered oval cutoutA
CA 2 round cutouts and center oval cutoutA
Eam
es®
Tabl
es=
==
68 Eames® Tables Price Book (2/18) HermanMiller
Eames® Conference Table, Ovalcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 68
For 54" deep x 120" wide (58V), 54" deep x 144" wide (60V), 54" deep x
156" wide (61V), 54" deep x 168" wide (62V), 60" deep x 120" wide
(71V), 60" deep x 144" wide (72V), 60" deep x 156" wide (73V), or 60"
deep x 168" wide (74V)
NG no grommetA
C2 2 round cutouts, over columnsA
CM 2 oval cutoutsA
CB 2 round cutouts and 2 oval cutoutsA
For 54" deep x 192" wide (64V) or 60" deep x 192" wide (75V)
NG no grommetA
C2 2 round cutouts, over columnsA
CP 3 oval cutoutsA
CE 2 round cutouts and 3 oval cutoutsA
For 54" deep x 216" wide (66V), 54" deep x 240" wide (68V), 54" deep x
264" wide (70V), 60" deep x 216" wide (76V), 60" deep x 240" wide
(77V), or 60" deep x 264" wide (78V)
NG no grommetA
C3 3 round cutouts, over columnsA
CN 4 oval cutoutsA
CD 3 round cutouts and 4 oval cutoutsA
Prices for Steps 1-6.
NG C2 C3 CM CN CP
ET187V S L $1661 2121 — — — —
C $2040 2500 — — — —
W $2200 2660 — — — —
M $3180 3640 — — — —
G $6650 7430 — — — —
CR CA CB CD CE
ET187V S L $1891 2351 — — —
C $2270 2730 — — —
W $2430 2890 — — —
M $3410 3870 — — —
G $7470 8260 — — —
NG C2 C3 CM CN CP
ET188V S L $1782 2242 — — — —
C $2220 2680 — — — —
W $2460 2920 — — — —
M $3200 3660 — — — —
G $7500 8290 — — — —
CR CA CB CD CE
ET188V S L $2012 2472 — — —
C $2450 2910 — — —
W $2690 3150 — — —
M $3430 3890 — — —
G $8320 9110 — — —
NG C2 C3 CM CN CP
ET149V S L $1879 2339 — — — —
C $2270 2730 — — — —
W $2464 2924 — — — —
M $3860 4320 — — — —
G $7500 8290 — — — —
CR CA CB CD CE
ET149V S L $2109 2569 — — —
C $2500 2960 — — —
W $2694 3154 — — —
M $4090 4550 — — —
G $8320 9110 — — —
NG C2 C3 CM CN CP
ET143V S L $1926 2386 — — — —
C $2340 2800 — — — —
W $2570 3030 — — — —
M $3880 4340 — — — —
G $8520 9300 — — — —
CR CA CB CD CE
ET143V S L $2156 2616 — — —
C $2570 3030 — — —
W $2800 3260 — — —
M $4110 4570 — — —
G $9340 10130 — — —
NG C2 C3 CM CN CP
ET144V S L $2014 2474 — — — —
C $2520 2980 — — — —
W $2810 3270 — — — —
M $3910 4370 — — — —
G $9530 10320 — — — —
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 69
Eames® Conference Table, Ovalcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 69
CR CA CB CD CE
ET144V S L $2244 2704 — — —
C $2750 3210 — — —
W $3040 3500 — — —
M $4140 4600 — — —
G $10360 11140 — — —
NG C2 C3 CM CN CP
ET189V S L $2157 2617 — — — —
C $2680 3140 — — — —
W $2890 3350 — — — —
M $3930 4390 — — — —
G $10620 11410 — — — —
CR CA CB CD CE
ET189V S L $2387 2847 — — —
C $2910 3370 — — —
W $3120 3580 — — —
M $4160 4620 — — —
G $11450 12230 — — —
NG C2 C3 CM CN CP
ET150V S L $2249 2709 — — — —
C $2610 3070 — — — —
W $2940 3400 — — — —
M $3890 4350 — — — —
G $8920 9710 — — — —
CR CA CB CD CE
ET150V S L $2479 2939 — — —
C $2840 3300 — — —
W $3170 3630 — — —
M $4120 4580 — — —
G $9750 10530 — — —
NG C2 C3 CM CN CP
ET151V S L $2317 2777 — — — —
C $2646 3106 — — — —
W $2967 3427 — — — —
M $3900 4360 — — — —
G $9530 10320 — — — —
CR CA CB CD CE
ET151V S L $2547 3007 — — —
C $2876 3336 — — —
W $3197 3657 — — —
M $4130 4590 — — —
G $10360 11140 — — —
NG C2 C3 CM CN CP
ET152V S L $2366 2826 — — — —
C $2769 3229 — — — —
W $3069 3529 — — — —
M $6280 6740 — — — —
G $10150 10930 — — — —
CR CA CB CD CE
ET152V S L $2596 3056 — — —
C $2999 3459 — — —
W $3299 3759 — — —
M $6510 6970 — — —
G $10970 11760 — — —
NG C2 C3 CM CN CP
ET153V S L $2394 2854 — — — —
C $2798 3258 — — — —
W $3104 3564 — — — —
M $6280 6740 — — — —
G $11100 12420 — — — —
CR CA CB CD CE
ET153V S L $2624 3084 — — —
C $3028 3488 — — —
W $3334 3794 — — —
M $6510 6970 — — —
G $12280 13610 — — —
NG C2 C3 CM CN CP
ET154V S L $2694 3154 — — — —
C $3109 3569 — — — —
W $3409 3869 — — — —
M $6300 6760 — — — —
G $12490 13820 — — — —
Eam
es®
Tabl
es=
==
70 Eames® Tables Price Book (2/18) HermanMiller
Eames® Conference Table, Ovalcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 70
CR CA CB CD CE
ET154V S L $2924 3384 — — —
C $3339 3799 — — —
W $3639 4099 — — —
M $6530 6990 — — —
G $13680 15000 — — —
NG C2 C3 CM CN CP
ET147V S L $2753 3213 — — — —
C $3173 3633 — — — —
W $3523 3983 — — — —
M $6330 6790 — — — —
G $14090 15440 — — — —
CR CA CB CD CE
ET147V S L $2983 3443 — — —
C $3403 3863 — — —
W $3753 4213 — — —
M $6560 7020 — — —
G $15280 16600 — — —
NG C2 C3 CM CN CP
ET155V S L $3265 3725 — — — —
C $3708 4168 — — — —
W $4108 4568 — — — —
M $6330 6790 — — — —
G $14780 16110 — — — —
CR CA CB CD CE
ET155V S L $3495 3955 — — —
C $3938 4398 — — —
W $4338 4798 — — —
M $6560 7020 — — —
G $16040 17300 — — —
NG C2 C3 CM CN CP
ET156V S L $3306 3766 — — — —
C $3828 4288 — — — —
W $4278 4738 — — — —
M $6350 6810 — — — —
G $15680 17010 — — — —
CR CA CB CD CE
ET156V S L $3536 3996 — — —
C $4058 4518 — — —
W $4508 4968 — — —
M $6580 7040 — — —
G $16870 18200 — — —
NG C2 C3 CM CN CP
ET157V S L $4301 4761 — — — —
C $4794 5254 — — — —
W $5319 5779 — — — —
G $17480 18810 — — — —
CR CA CB CD CE
ET157V S L $4531 4991 — — —
C $5024 5484 — — —
W $5549 6009 — — —
G $18670 20000 — — —
NG C2 C3 CM CN CP
ET158V S L $4784 5244 — 5244 — —
C $5374 5834 — 5834 — —
W $5974 6434 — 6434 — —
G $19900 21220 — 21270 — —
CR CA CB CD CE
ET158V S L — — $5704 — —
C — — $6294 — —
W — — $6894 — —
G — —$22600 — —
NG C2 C3 CM CN CP
ET160V S L $5183 5643 — 5643 — —
C $5791 6251 — 6251 — —
W $6491 6951 — 6951 — —
CR CA CB CD CE
ET160V S L — — $6103 — —
C — — $6711 — —
W — — $7411 — —
NG C2 C3 CM CN CP
ET161V S L $5633 6093 — 6093 — —
C $6264 6724 — 6724 — —
W $7039 7499 — 7499 — —
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 71
Eames® Conference Table, Ovalcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 71
CR CA CB CD CE
ET161V S L — — $6553 — —
C — — $7184 — —
W — — $7959 — —
NG C2 C3 CM CN CP
ET162V S L $6172 6632 — 6632 — —
C $6901 7361 — 7361 — —
W $7751 8211 — 8211 — —
CR CA CB CD CE
ET162V S L — — $7092 — —
C — — $7821 — —
W — — $8671 — —
NG C2 C3 CM CN CP
ET164V S L $6814 7274 — — — 7504
C $7717 8177 — — — 8407
W $8667 9127 — — — 9357
CR CA CB CD CE
ET164V S L — — — — $7964
C — — — — $8867
W — — — — $9817
NG C2 C3 CM CN CP
ET166V S L $7506 — 8196 — 8426 —
C $8440 — 9130 — 9360 —
W $9490 — 10180 — 10410 —
CR CA CB CD CE
ET166V S L — — — $9116 —
C — — — $10050 —
W — — — $11100 —
NG C2 C3 CM CN CP
ET168V S L $8280 — 8970 — 9200 —
C $9252 — 9942 — 10172 —
W $10402 — 11092 — 11322 —
CR CA CB CD CE
ET168V S L — — — $9890 —
C — — — $10862 —
W — — — $12012 —
NG C2 C3 CM CN CP
ET170V S L $9033 — 9723 — 9953 —
C $10185 — 10875 — 11105 —
W $11435 — 12125 — 12355 —
CR CA CB CD CE
ET170V S L — — — $10643 —
C — — — $11795 —
W — — — $13045 —
NG C2 C3 CM CN CP
ET171V S L $8900 9360 — 9360 — —
C $10900 11360 — 11360 — —
W $11600 12060 — 12060 — —
G $24430 25750 — 25800 — —
CR CA CB CD CE
ET171V S L — — $9820 — —
C — — $11820 — —
W — — $12520 — —
G — — $27130 — —
NG C2 C3 CM CN CP
ET172V S L $9299 9759 — 9759 — —
C $11500 11960 — 11960 — —
W $12300 12760 — 12760 — —
CR CA CB CD CE
ET172V S L — — $10219 — —
C — — $12420 — —
W — — $13220 — —
NG C2 C3 CM CN CP
ET173V S L $9599 10059 — 10059 — —
C $12000 12460 — 12460 — —
W $12875 13335 — 13335 — —
CR CA CB CD CE
ET173V S L — — $10519 — —
C — — $12920 — —
W — — $13795 — —
NG C2 C3 CM CN CP
ET174V S L $9999 10459 — 10459 — —
C $12600 13060 — 13060 — —
W $13550 14010 — 14010 — —
Eam
es®
Tabl
es=
==
72 Eames® Tables Price Book (2/18) HermanMiller
Eames® Conference Table, Ovalcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 72
CR CA CB CD CE
ET174V S L — — $10919 — —
C — — $13520 — —
W — — $14470 — —
NG C2 C3 CM CN CP
ET175V S L $11800 12260 — — — 12490
C $16800 17260 — — — 17490
W $17850 18310 — — — 18540
CR CA CB CD CE
ET175V S L — — — — $12950
C — — — — $17950
W — — — — $19000
NG C2 C3 CM CN CP
ET176V S L $14300 — 14990 — 15220 —
C $20900 — 21590 — 21820 —
W $22050 — 22740 — 22970 —
CR CA CB CD CE
ET176V S L — — — $15910 —
C — — — $22510 —
W — — —$23660 —
NG C2 C3 CM CN CP
ET177V S L $15600 — 16290 — 16520 —
C $22300 — 22990 — 23220 —
W $23550 — 24240 — 24470 —
CR CA CB CD CE
ET177V S L — — — $17210 —
C — — — $23910 —
W — — — $25160 —
NG C2 C3 CM CN CP
ET178V S L $15900 — 16590 — 16820 —
C $23200 — 23890 — 24120 —
W $24550 — 25240 — 25470 —
CR CA CB CD CE
ET178V S L — — — $17510 —
C — — — $24810 —
W — — — $26160 —
Step 7.
Top Finish: Top Finish
For back-painted glass top (G)
8Q folkstone greyA +$0
91 whiteA +$0
BK blackA +$0
WN warm grey neutralA +$0
Top Finish: Top Finish
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Top Finish: Solid-Color Laminate
For laminate top with vinyl edge (L)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BKM black matteA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
HT inner toneA +$0
LT light toneA +$0
LU soft whiteA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Top Finish: Recut Veneer
For veneer top with vinyl edge (C)
87V 88V 49V 43V 44V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
89V 50V 51V 52V 53V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
54V 47V 55V 56V 57V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
58V 60V 61V 62V 64V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 73
Eames® Conference Table, Ovalcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 73
66V 68V 70V 71V 72V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
73V 74V 75V 76V 77V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
78V
RA light ashA +$0
RK mahogany darkA +$0
RM mahoganyA +$0
For veneer top with vinyl edge (C)
87V 88V 49V 43V 44V
2U +$250 265 265 290 305light brown
walnutA
40 +$250 265 265 290 305dark brown
walnutA
9N +$950 1009 1009 1104 1161santos palisanderA
A2 white ashA +$250 265 265 290 305
ED aged cherryA +$250 265 265 290 305
EK +$250 265 265 290 305medium red
walnutA
EN ebonyA +$250 265 265 290 305
OU walnutA +$250 265 265 290 305
UL natural mapleA +$250 265 265 290 305
UX +$250 265 265 290 305walnut on cherryA
V2 beechA +$190 205 205 215 225
89V 50V 51V 52V 53V
2U +$330 290 305 330 330light brown
walnutA
40 +$330 290 305 330 330dark brown
walnutA
9N +$1420 1160 1220 1320 1320santos palisanderA
A2 white ashA +$330 290 305 330 330
ED aged cherryA +$330 290 305 330 330
EK +$330 290 305 330 330medium red
walnutA
EN ebonyA +$330 290 305 330 330
OU walnutA +$330 290 305 330 330
UL natural mapleA +$330 290 305 330 330
UX +$330 290 305 330 330walnut on cherryA
V2 beechA +$245 215 225 245 245
54V 47V 55V 56V 57V
2U +$385 385 425 440 500light brown
walnutA
40 +$385 385 425 440 500dark brown
walnutA
9N +$1656 1656 1700 1760 2350santos palisanderA
A2 white ashA +$385 385 425 440 500
ED aged cherryA +$385 385 425 440 500
EK +$385 385 425 440 500medium red
walnutA
EN ebonyA +$385 385 425 440 500
OU walnutA +$385 385 425 440 500
UL natural mapleA +$385 385 425 440 500
UX +$385 385 425 440 500walnut on cherryA
V2 beechA +$280 280 290 315 345
58V 60V 61V 62V 64V
2U +$540 585 635 690 755light brown
walnutA
40 +$540 585 635 690 755dark brown
walnutA
9N +$2538 2750 3175 3450 3775santos palisanderA
A2 white ashA +$540 585 635 690 755
ED aged cherryA +$540 585 635 690 755
EK +$540 585 635 690 755medium red
walnutA
EN ebonyA +$540 585 635 690 755
OU walnutA +$540 585 635 690 755
UL natural mapleA +$540 585 635 690 755
UX +$540 585 635 690 755walnut on cherryA
V2 beechA +$375 410 445 480 520
66V 68V 70V 71V 72V
2U +$815 880 950 680 740light brown
walnutA
40 +$815 880 950 680 740dark brown
walnutA
9N +$4075 4400 5320 3180 3440santos palisanderA
A2 white ashA +$815 880 950 680 740
ED aged cherryA +$815 880 950 680 740
EK +$815 880 950 680 740medium red
walnutA
EN ebonyA +$815 880 950 680 740
OU walnutA +$815 880 950 680 740
UL natural mapleA +$815 880 950 680 740
UX +$815 880 950 680 740walnut on cherryA
V2 beechA +$560 600 650 470 520
Eam
es®
Tabl
es=
==
74 Eames® Tables Price Book (2/18) HermanMiller
Eames® Conference Table, Ovalcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 74
73V 74V 75V 76V 77V
2U +$800 870 950 950 1100light brown
walnutA
40 +$800 870 950 950 1100dark brown
walnutA
9N +$3970 4320 5100 5100 5500santos palisanderA
A2 white ashA +$800 870 950 950 1100
ED aged cherryA +$800 870 950 950 1100
EK +$800 870 950 950 1100medium red
walnutA
EN ebonyA +$800 870 950 950 1100
OU walnutA +$800 870 950 950 1100
UL natural mapleA +$800 870 950 950 1100
UX +$800 870 950 950 1100walnut on cherryA
V2 beechA +$560 600 650 650 750
78V
2U light brown walnutA +$1100
40 dark brown walnutA +$1100
9N santos palisanderA +$5500
A2 white ashA +$1100
ED aged cherryA +$1100
EK medium red walnutA +$1100
EN ebonyA +$1100
OU walnutA +$1100
UL natural mapleA +$1100
UX walnut on cherryA +$1100
V2 beechA +$750
For veneer top with veneer edge (W)
87V 88V 49V 43V 44V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
89V 50V 51V 52V 53V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
54V 47V 55V 56V 57V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
58V 60V 61V 62V 64V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
66V 68V 70V 71V 72V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
73V 74V 75V 76V 77V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
78V
RA light ashA +$0
RK mahogany darkA +$0
RM mahoganyA +$0
For veneer top with veneer edge (W)
87V 88V 49V 43V 44V
2U +$250 265 265 290 305light brown
walnutA
40 +$250 265 265 290 305dark brown
walnutA
9N +$950 1009 1009 1104 1161santos palisanderA
A2 white ashA +$250 265 265 290 305
ED aged cherryA +$250 265 265 290 305
EK +$250 265 265 290 305medium red
walnutA
EN ebonyA +$250 265 265 290 305
OU walnutA +$250 265 265 290 305
UL natural mapleA +$250 265 265 290 305
UX +$250 265 265 290 305walnut on cherryA
V2 beechA +$190 205 205 215 225
89V 50V 51V 52V 53V
2U +$330 290 305 330 330light brown
walnutA
40 +$330 290 305 330 330dark brown
walnutA
9N +$1420 1160 1220 1320 1320santos palisanderA
A2 white ashA +$330 290 305 330 330
ED aged cherryA +$330 290 305 330 330
EK +$330 290 305 330 330medium red
walnutA
EN ebonyA +$330 290 305 330 330
OU walnutA +$330 290 305 330 330
UL natural mapleA +$330 290 305 330 330
UX +$330 290 305 330 330walnut on cherryA
V2 beechA +$245 215 225 245 245
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 75
Eames® Conference Table, Ovalcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 75
54V 47V 55V 56V 57V
2U +$385 385 425 440 500light brown
walnutA
40 +$385 385 425 440 500dark brown
walnutA
9N +$1656 1656 1700 1760 2350santos palisanderA
A2 white ashA +$385 385 425 440 500
ED aged cherryA +$385 385 425 440 500
EK +$385 385 425 440 500medium red
walnutA
EN ebonyA +$385 385 425 440 500
OU walnutA +$385 385 425 440 500
UL natural mapleA +$385 385 425 440 500
UX +$385 385 425 440 500walnut on cherryA
V2 beechA +$280 280 290 315 345
58V 60V 61V 62V 64V
2U +$540 585 635 690 755light brown
walnutA
40 +$540 585 635 690 755dark brown
walnutA
9N +$2538 2750 3175 3450 3775santos palisanderA
A2 white ashA +$540 585 635 690 755
ED aged cherryA +$540 585 635 690 755
EK +$540 585 635 690 755medium red
walnutA
EN ebonyA +$540 585 635 690 755
OU walnutA +$540 585 635 690 755
UL natural mapleA +$540 585 635 690 755
UX +$540 585 635 690 755walnut on cherryA
V2 beechA +$375 410 445 480 520
66V 68V 70V 71V 72V
2U +$815 880 950 680 740light brown
walnutA
40 +$815 880 950 680 740dark brown
walnutA
9N +$4075 4400 5320 3180 3440santos palisanderA
A2 white ashA +$815 880 950 680 740
ED aged cherryA +$815 880 950 680 740
EK +$815 880 950 680 740medium red
walnutA
EN ebonyA +$815 880 950 680 740
OU walnutA +$815 880 950 680 740
UL natural mapleA +$815 880 950 680 740
UX +$815 880 950 680 740walnut on cherryA
V2 beechA +$560 600 650 470 520
73V 74V 75V 76V 77V
2U +$800 870 950 950 1100light brown
walnutA
40 +$800 870 950 950 1100dark brown
walnutA
9N +$3970 4320 5100 5100 5500santos palisanderA
A2 white ashA +$800 870 950 950 1100
ED aged cherryA +$800 870 950 950 1100
EK +$800 870 950 950 1100medium red
walnutA
EN ebonyA +$800 870 950 950 1100
OU walnutA +$800 870 950 950 1100
UL natural mapleA +$800 870 950 950 1100
UX +$800 870 950 950 1100walnut on cherryA
V2 beechA +$560 600 650 650 750
78V
2U light brown walnutA +$1100
40 dark brown walnutA +$1100
9N santos palisanderA +$5500
A2 white ashA +$1100
ED aged cherryA +$1100
EK medium red walnutA +$1100
EN ebonyA +$1100
OU walnutA +$1100
UL natural mapleA +$1100
UX walnut on cherryA +$1100
V2 beechA +$750
Step 8. Edge Finish
For laminate top with vinyl edge (L) or veneer top with vinyl edge (C)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Eam
es®
Tabl
es=
==
76 Eames® Tables Price Book (2/18) HermanMiller
Eames® Conference Table, Ovalcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 76
Step 9. Grommet Finish
For 2 round cutouts, over columns (C2) or 3 round cutouts, over
columns (C3)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
For single centered oval cutout (CR) or 2 round cutouts and center oval
cutout (CA)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$150
For 2 oval cutouts (CM) or 2 round cutouts and 2 oval cutouts (CB)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$300
For 3 oval cutouts (CP) or 2 round cutouts and 3 oval cutouts (CE)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$450
For 4 oval cutouts (CN) or 3 round cutouts and 4 oval cutouts (CD)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
PA polished aluminumA +$600
Step 10. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 11. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 12. Casters/Glides
For 30" deep x 60" wide (87V), 30" deep x 72" wide (88V), 36" deep x
60" wide (49V), 36" deep x 72" wide (43V), 36" deep x 84" wide (44V),
36" deep x 96" wide (89V), 42" deep x 66" wide (50V), 42" deep x 72"
wide (51V), 42" deep x 78" wide (52V), 42" deep x 84" wide (53V), 48"
deep x 84" wide (54V), or 48" deep x 96" wide (47V) with laminate top
with vinyl edge (L), or veneer top with vinyl edge (C), or veneer top with
veneer edge (W), or thin profile HPL top with black edge (M)
G glidesA +$0
C castersA +$80
For 54" deep x 108" wide (57V), 54" deep x 120" wide (58V), 54" deep x
144" wide (60V), 54" deep x 156" wide (61V), 54" deep x 168" wide
(62V), 54" deep x 192" wide (64V), 54" deep x 216" wide (66V), 54"
deep x 240" wide (68V), 54" deep x 264" wide (70V), 60" deep x 120"
wide (71V), 60" deep x 144" wide (72V), 60" deep x 156" wide (73V), 60"
deep x 168" wide (74V), 60" deep x 192" wide (75V), 60" deep x 216"
wide (76V), 60" deep x 240" wide (77V), or 60" deep x 264" wide (78V)
with laminate top with vinyl edge (L), or veneer top with vinyl edge (C),
or veneer top with veneer edge (W)
G glidesA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 77
Eames® Conference Table, Ovalcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 77
For 30" deep x 60" wide (87V), 30" deep x 72" wide (88V), 36" deep x
60" wide (49V), 36" deep x 72" wide (43V), 36" deep x 84" wide (44V),
36" deep x 96" wide (89V), 42" deep x 66" wide (50V), 42" deep x 72"
wide (51V), 42" deep x 78" wide (52V), 42" deep x 84" wide (53V), 48"
deep x 84" wide (54V), 48" deep x 96" wide (47V), 54" deep x 90" wide
(55V), 54" deep x 96" wide (56V), 54" deep x 108" wide (57V), 54"
deep x 120" wide (58V), or 60" deep x 120" wide (71V) with back-
painted glass top (G)
G glidesA +$0
For 54" deep x 90" wide (55V) or 54" deep x 96" wide (56V) with
laminate top with vinyl edge (L), or veneer top with vinyl edge (C), or
veneer top with veneer edge (W), or thin profile HPL top with black edge
(M)
G glidesA +$0
Eam
es®
Tabl
es=
==
78 Eames® Tables Price Book (2/18) HermanMiller
Eames® Conference Table, Ovalcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 78
Eames® Conference Table, Round,Stone
Product Information
Description
This table has a stone top and comes with adjustable glides. Ships
knocked down with assembly required. Top and base components ship
in separate packages.
Notes
Stone top is 3/4" thick and has a full bullnose edge profile.
Marble tops have a honed finish; quartz tops have a polished finish.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET107!ET108!ET109!ET110!
HermanMiller Eames® Tables Price Book (2/18) 79
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 79
Specification Information
Step 1.
ETA
Step 2. Height
1 281/2" highA
Step 3. Diameter
07 30" diameterA
08 36" diameterA
09 42" diameterA
10 48" diameterA
Step 4. Base
For 30" diameter (07) or 36" diameter (08)
U universal baseA
C contract baseA
For 42" diameter (09) or 48" diameter (10)
C contract baseA
Step 5. Surface Material
S stone topA
Prices for Steps 1-5.
S
ET107 U $4122
C $4122
ET108 U $4973
C $4973
ET109 C $7240
ET110 C $7499
Step 6. Top Finish
07S 08S 09S 10S
5U georgia grey marbleA +$436 526 610 711
CRR Carrara marbleA +$436 0 -1000 -1000
HR wisconsin black marbleA +$1212 1462 1590 1723
QBL black quartzA +$270 -300 -1200 -1200
QCN concrete quartzA -$250 -900 -1800 -1800
QPL pearl quartzA -$250 -900 -1800 -1800
Step 7. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Step 8. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Eam
es®
Tabl
es=
==
80 Eames® Tables Price Book (2/18) HermanMiller
Eames® Conference Table, Round,Stone continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 80
Eames® Conference Table, Square,Stone
Product Information
Description
This table has a stone top and comes with adjustable glides. Ships
knocked down with assembly required. Top and base components ship
in separate packages.
Notes
Stone top is 3/4" thick and has a full bullnose edge profile.
Marble tops have a honed finish; quartz tops have a polished finish.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET104!ET106!
HermanMiller Eames® Tables Price Book (2/18) 81
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 81
Specification Information
Step 1.
ETA
Step 2. Height
1 281/2" highA
Step 3. Depth/Width
04 30" deep x 30" wideA
06 42" deep x 42" wideA
Step 4. Base
For 30" deep x 30" wide (04)
U universal baseA
C contract baseA
For 42" deep x 42" wide (06)
C contract baseA
Step 5. Surface Material
S stone topA
Prices for Steps 1-5.
S
ET104 U $4122
C $4122
ET106 C $7240
Step 6. Top Finish
04S 06S
5U georgia grey marbleA +$436 610
CRR Carrara marbleA +$436 -1000
HR wisconsin black marbleA +$1212 1590
QBL black quartzA +$270 -1200
QCN concrete quartzA -$250 -1800
QPL pearl quartzA -$250 -1800
Step 7. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Step 8. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Eam
es®
Tabl
es=
==
82 Eames® Tables Price Book (2/18) HermanMiller
Eames® Conference Table, Square,Stone continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 82
Eames® Conference Table,Rectangular, Stone
Product Information
Description
This table has a stone top and comes with adjustable glides. Ships
knocked down with assembly required. Top and base components ship
in separate packages.
Notes
Stone top is 3/4" thick and has a full bullnose edge profile.
Marble tops have a honed finish; quartz tops have a polished finish.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET143!ET150!ET152!ET187!
HermanMiller Eames® Tables Price Book (2/18) 83
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 83
Specification Information
Step 1.
ETA
Step 2. Height
1 281/2" highA
Step 3. Depth/Width
87R 30" deep x 60" wideA
43R 36" deep x 72" wideA
50R 42" deep x 66" wideA
52R 42" deep x 78" wideA
Step 4. Base
S segmented baseA
Step 5. Surface Material
S stone topA
Prices for Steps 1-5.
S
ET187R S $9696
ET143R S $10844
ET150R S $10558
ET152R S $11122
Step 6. Top Finish
87RS 43RS 50RS 52RS
5U georgia grey marbleA +$1026 1148 0 0
CRR Carrara marbleA -$500 -500 -500 -800
HR wisconsin black marbleA +$2808 3141 3500 3500
QBL black quartzA -$1400 -1200 -1400 -1400
QCN concrete quartzA -$2200 -3000 -3000 -3000
QPL pearl quartzA -$2200 -3000 -3000 -3000
Step 7. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Step 8. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Eam
es®
Tabl
es=
==
84 Eames® Tables Price Book (2/18) HermanMiller
Eames® Conference Table,Rectangular, Stone continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 84
Eames® Conference Table, Oval,Stone
Product Information
Description
This table has a stone top and comes with adjustable glides. Ships
knocked down with assembly required. Top and base components ship
in separate packages.
Notes
Stone top is 3/4" thick and has a full bullnose edge profile.
Marble tops have a honed finish; quartz tops have a polished finish.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET143!ET150!ET152!ET187!
HermanMiller Eames® Tables Price Book (2/18) 85
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 85
Specification Information
Step 1.
ETA
Step 2. Height
1 281/2" highA
Step 3. Depth/Width
87V 30" deep x 60" wideA
43V 36" deep x 72" wideA
50V 42" deep x 66" wideA
52V 42" deep x 78" wideA
Step 4. Base
S segmented baseA
Step 5. Surface Material
S stone topA
Prices for Steps 1-5.
S
ET187V S $9696
ET143V S $10844
ET150V S $10558
ET152V S $11122
Step 6. Top Finish
87VS 43VS 50VS 52VS
5U georgia grey marbleA +$700 0 1117 1177
CRR Carrara marbleA +$450 -300 500 500
HR wisconsin black marbleA +$2215 3050 3058 3221
QBL black quartzA -$400 -350 -500 -500
QCN concrete quartzA -$1200 -2000 -2000 -2000
QPL pearl quartzA -$1200 -2000 -2000 -2000
Step 7. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Step 8. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Eam
es®
Tabl
es=
==
86 Eames® Tables Price Book (2/18) HermanMiller
Eames® Conference Table, Oval,Stone continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 86
Eames® Standing Height Table,Round
Product Information
Description
This table has a laminate or veneer top with vinyl edge, a veneer top
and edge, a thin-profile HPL top with black edge, or a back-painted glass
top with modified bullnose edge. Table may be specified with cutouts to
accommodate simple power options (specified separately). Each table
has adjustable glides. Shipped knocked down.
Notes
30"-60" tables have a 1-piece top and single column base. 66"-96" tables
have 2-piece tops and a 4-column segmented base.
Laminate and veneer tops 30"-48" diameter are 7/8" thick; tops 54"-96"
diameter are 11/4" thick.
Thin profile HPL tops are 1/2" thick.
Glass tops are back-painted, with a satin etch finish to reduce the
appearance of fingerprints. Tops 30"-48" diameter are 1/2" thick; tops
54"-60" diameter are 1/2" thick with a Formcoat® substructure.
30" and 36" diameter tables may only accommodate USB access. Single
center cutout (CC) grommet option must be specified. Grommet option
is a non-functional hole plug. For USB access, order round dual USB
charging unit (ET990.) separately.
42"-60" diameter tables may accommodate power. Single center cutout
(CC) grommet option must be specified. Grommet provides simple pass-
through with wire management features and a hinged lid. For power
access, order round power module (ET991.) separately.
Multiple column tables (66"-96" diameter) may accommodate up to 4
power modules. Four cutouts (C4) option must be specified; cutouts are
aligned above the columns. Grommets provide simple pass-through
with wire management features and a hinged lid. For power access,
order round power module (ET991.) separately.
Santos palisander veneer is celebrated for its unique grain and color
variations. Similar products ordered in multiples or dissimilar products
ordered separately should be expected to have variation in both grain
and color characteristics; no two products will look exactly alike.
Dimensions
ET407!ET408!ET422!ET423!ET424!ET425!ET426!ET427!ET429!
ET431!ET507!ET508!ET522!ET523!ET524!ET525!ET526!ET527!
ET529!ET531!
HermanMiller Eames® Tables Price Book (2/18) 87
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 87
Specification Information
Step 1.
ETA
Step 2. Height
4 36" highA
5 42" highA
Step 3. Diameter
07 30" diameterA
08 36" diameterA
22 42" diameterA
23 48" diameterA
24 54" diameterA
25 60" diameterA
26 66" diameterA
27 72" diameterA
29 84" diameterA
31 96" diameterA
Step 4. Base
For 30" diameter (07) or 36" diameter (08)
C contract baseA
U universal baseA
For 42" diameter (22) or 48" diameter (23)
C contract baseA
S segmented baseA
For 54" diameter (24), 60" diameter (25), 66" diameter (26), 72"
diameter (27), 84" diameter (29), or 96" diameter (31)
S segmented baseA
Step 5. Surface Material
For 30" diameter (07), 36" diameter (08), 42" diameter (22), 48"
diameter (23), 54" diameter (24), or 60" diameter (25)
L laminate top with vinyl edge
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
M thin profile HPL top with black edge
G back-painted glass top
For 66" diameter (26), 72" diameter (27), 84" diameter (29), or 96"
diameter (31)
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
Step 6. Grommets
For 30" diameter (07), 36" diameter (08), 42" diameter (22), 48"
diameter (23), 54" diameter (24), or 60" diameter (25)
NG no grommetA
CC single center cutoutA
For 66" diameter (26), 72" diameter (27), 84" diameter (29), or 96"
diameter (31)
NG no grommetA
C4 four cutoutsA
Prices for Steps 1-6.
NG C4 CC
ET407 C L $960 — 1005
C $1110 — 1155
W $1240 — 1285
M $1670 — 1750
G $3540 — 3960
U L $960 — 1005
C $1110 — 1155
W $1240 — 1285
M $1670 — 1750
G $3540 — 3960
NG C4 CC
ET408 C L $1100 — 1145
C $1260 — 1305
W $1440 — 1485
M $2150 — 2230
G $4560 — 4970
U L $1100 — 1145
C $1260 — 1305
W $1440 — 1485
M $2150 — 2230
G $4560 — 4970
Eam
es®
Tabl
es=
==
88 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Round continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 88
NG C4 CC
ET422 C L $1370 — 1600
C $1560 — 1790
W $1740 — 1970
M $3340 — 3570
G $5880 — 6420
S L $1370 — 1600
C $1560 — 1790
W $1740 — 1970
M $3340 — 3570
G $5880 — 6420
NG C4 CC
ET423 C L $1500 — 1730
C $1700 — 1930
W $1870 — 2100
M $3420 — 3650
G $7250 — 7800
S L $1500 — 1730
C $1700 — 1930
W $1870 — 2100
M $3420 — 3650
G $7250 — 7800
NG C4 CC
ET424 S L $1840 — 2070
C $2120 — 2350
W $2250 — 2480
M $5880 — 6110
G $10150 — 10520
NG C4 CC
ET425 S L $2350 — 2580
C $2679 — 2909
W $2979 — 3209
M $5910 — 6140
G $12140 — 12620
NG C4 CC
ET426 S L $3679 4599 —
C $4029 4949 —
W $4429 5349 —
NG C4 CC
ET427 S L $3817 4737 —
C $4269 5189 —
W $4719 5639 —
NG C4 CC
ET429 S L $4259 5179 —
C $4889 5809 —
W $5389 6309 —
NG C4 CC
ET431 S L $5086 6006 —
C $5919 6839 —
W $6519 7439 —
NG C4 CC
ET507 C L $960 — 1005
C $1110 — 1155
W $1240 — 1285
M $1670 — 1750
G $3540 — 3960
U L $960 — 1005
C $1110 — 1155
W $1240 — 1285
M $1670 — 1750
G $3540 — 3960
NG C4 CC
ET508 C L $1100 — 1145
C $1260 — 1305
W $1440 — 1485
M $2150 — 2230
G $4560 — 4970
U L $1100 — 1145
C $1260 — 1305
W $1440 — 1485
M $2150 — 2230
G $4560 — 4970
NG C4 CC
ET522 C L $1370 — 1600
C $1560 — 1790
W $1740 — 1970
M $3340 — 3570
G $5880 — 6420
S L $1370 — 1600
C $1560 — 1790
W $1740 — 1970
M $3340 — 3570
G $5880 — 6420
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 89
Eames® Standing Height Table,Round continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 89
NG C4 CC
ET523 C L $1500 — 1730
C $1700 — 1930
W $1870 — 2100
M $3420 — 3650
G $7250 — 7800
S L $1500 — 1730
C $1700 — 1930
W $1870 — 2100
M $3420 — 3650
G $7250 — 7800
NG C4 CC
ET524 S L $1840 — 2070
C $2120 — 2350
W $2250 — 2480
M $5880 — 6110
G $10150 — 10520
NG C4 CC
ET525 S L $2350 — 2580
C $2679 — 2909
W $2979 — 3209
M $5910 — 6140
G $12140 — 12620
NG C4 CC
ET526 S L $3679 4599 —
C $4029 4949 —
W $4429 5349 —
NG C4 CC
ET527 S L $3817 4737 —
C $4269 5189 —
W $4719 5639 —
NG C4 CC
ET529 S L $4259 5179 —
C $4889 5809 —
W $5389 6309 —
NG C4 CC
ET531 S L $5086 6006 —
C $5919 6839 —
W $6519 7439 —
Step 7.
Top Finish: Finish
For back-painted glass top (G)
8Q folkstone greyA +$0
91 whiteA +$0
BK blackA +$0
WN warm grey neutralA +$0
Top Finish: Finish
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Top Finish: Solid-Color Laminate
For laminate top with vinyl edge (L)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BKM black matteA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
HT inner toneA +$0
LT light toneA +$0
LU soft whiteA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Top Finish: Recut Veneer
For veneer top with vinyl edge (C)
07 08 22 23 24
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
25 26 27 29 31
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
Eam
es®
Tabl
es=
==
90 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Round continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 90
Top Finish: Wood Veneer
For veneer top with vinyl edge (C)
07 08 22 23 24
2U +$105 105 130 175 230light brown
walnutA
40 +$105 105 130 175 230dark brown
walnutA
9N +$380 380 720 839 976santos palisanderA
A2 white ashA +$105 105 130 175 230
ED aged cherryA +$105 105 130 175 230
EK +$105 105 130 175 230medium red
walnutA
EN ebonyA +$105 105 130 175 230
OU walnutA +$105 105 130 175 230
UL natural mapleA +$105 105 130 175 230
UX +$105 105 130 175 230walnut on cherryA
V2 beechA +$80 80 95 130 170
25 26 27 29 31
2U +$365 365 365 425 495light brown
walnutA
40 +$365 365 365 425 495dark brown
walnutA
9N +$2044 2044 2044 2380 2782santos palisanderA
A2 white ashA +$365 365 365 425 495
ED aged cherryA +$365 365 365 425 495
EK +$365 365 365 425 495medium red
walnutA
EN ebonyA +$365 365 365 425 495
OU walnutA +$365 365 365 425 495
UL natural mapleA +$365 365 365 425 495
UX +$365 365 365 425 495walnut on cherryA
V2 beechA +$250 250 250 290 330
For veneer top with veneer edge (W)
07 08 22 23 24
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
25 26 27 29 31
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
For veneer top with veneer edge (W)
07 08 22 23 24
2U +$105 105 130 175 230light brown
walnutA
40 +$105 105 130 175 230dark brown
walnutA
9N +$380 380 720 839 976santos palisanderA
A2 white ashA +$105 105 130 175 230
ED aged cherryA +$105 105 130 175 230
EK +$105 105 130 175 230medium red
walnutA
EN ebonyA +$105 105 130 175 230
OU walnutA +$105 105 130 175 230
UL natural mapleA +$105 105 130 175 230
UX +$105 105 130 175 230walnut on cherryA
V2 beechA +$80 80 95 130 170
25 26 27 29 31
2U +$365 365 365 425 495light brown
walnutA
40 +$365 365 365 425 495dark brown
walnutA
9N +$2044 2044 2044 2380 2782santos palisanderA
A2 white ashA +$365 365 365 425 495
ED aged cherryA +$365 365 365 425 495
EK +$365 365 365 425 495medium red
walnutA
EN ebonyA +$365 365 365 425 495
OU walnutA +$365 365 365 425 495
UL natural mapleA +$365 365 365 425 495
UX +$365 365 365 425 495walnut on cherryA
V2 beechA +$250 250 250 290 330
Step 8. Edge Finish
For laminate top with vinyl edge (L) or veneer top with vinyl edge (C)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 91
Eames® Standing Height Table,Round continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 91
Step 9. Grommet Finish
For 30" diameter (07) or 36" diameter (08) with single center cutout (CC)
PA polished aluminumA +$0
For 42" diameter (22), 48" diameter (23), 54" diameter (24), 60"
diameter (25), 66" diameter (26), 72" diameter (27), 84" diameter (29),
or 96" diameter (31) with four cutouts (C4), or single center cutout (CC)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
Step 10. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 11. Base Finish
91 whiteA +$0
BK blackA +$0
BU blackA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Eam
es®
Tabl
es=
==
92 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Round continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 92
Eames® Standing Height Table,Square
Product Information
Description
This table has a laminate or veneer top with vinyl edge, a veneer top
and edge, a thin-profile HPL top with black edge, or a back-painted glass
top with modified bullnose edge. Table may be specified with cutouts to
accommodate simple power options (specified separately). Each table
has adjustable glides. Shipped knocked down.
Notes
Tables have a 1-piece top and single column base.
Laminate and veneer tops are 7/8" thick.
Thin profile HPL tops are 1/2" thick.
Glass tops are back-painted, with a satin etch finish to reduce the
appearance of fingerprints. Tops are 1/2" thick.
30" and 36" tables may only accommodate USB access. Single center
cutout (CC) grommet option must be specified. Grommet option is a
non-functional hole plug. For USB access, order round dual USB
charging unit (ET990.) separately.
42" and 48" tables may accommodate power. Single center cutout (CC)
grommet option must be specified. Grommet provides simple pass-
through with wire management features and a hinged lid. For power
access, order round power module (ET991.) separately.
Santos palisander veneer is celebrated for its unique grain and color
variations. Similar products ordered in multiples or dissimilar products
ordered separately should be expected to have variation in both grain
and color characteristics; no two products will look exactly alike.
Dimensions
ET404!ET405!ET406!ET448!ET504!ET505!ET506!ET548!
HermanMiller Eames® Tables Price Book (2/18) 93
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 93
Specification Information
Step 1.
ETA
Step 2. Height
4 36" highA
5 42" highA
Step 3. Depth/Width
04 30" deep x 30" wideA
05 36" deep x 36" wideA
06 42" deep x 42" wideA
48 48" deep x 48" wideA
Step 4. Base
For 30" deep x 30" wide (04) or 36" deep x 36" wide (05)
C contract baseA
U universal baseA
For 42" deep x 42" wide (06) or 48" deep x 48" wide (48)
C contract baseA
Step 5. Surface Material
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
M thin profile HPL top with black edgeA
G back-painted glass topA
Step 6. Grommets
NG no grommetA
CC single center cutoutA
Prices for Steps 1-6.
NG CC
ET404 C L $960 1005
C $1110 1155
W $1240 1285
M $1670 1750
G $3540 3960
U L $960 1005
C $1110 1155
W $1240 1285
M $1670 1750
G $3540 3960
NG CC
ET405 C L $1100 1145
C $1260 1305
W $1440 1485
M $2150 2230
G $4560 4970
U L $1100 1145
C $1260 1305
W $1440 1485
M $2150 2230
G $4560 4970
NG CC
ET406 C L $1370 1600
C $1560 1790
W $1740 1970
M $3340 3570
G $5880 6420
NG CC
ET448 C L $1500 1730
C $1700 1930
W $1870 2100
M $3420 3650
G $7250 7800
NG CC
ET504 C L $960 1005
C $1110 1155
W $1240 1285
M $1670 1750
G $3540 3960
U L $960 1005
C $1110 1155
W $1240 1285
M $1670 1750
G $3540 3960
NG CC
ET505 C L $1100 1145
C $1260 1305
W $1440 1485
M $2150 2230
G $4560 4970
Eam
es®
Tabl
es=
==
94 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Square continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 94
U L $1100 1145
C $1260 1305
W $1440 1485
M $2150 2230
G $4560 4970
NG CC
ET506 C L $1370 1600
C $1560 1790
W $1740 1970
M $3340 3570
G $5880 6420
NG CC
ET548 C L $1500 1730
C $1700 1930
W $1870 2100
M $3420 3650
G $7250 7800
Step 7.
Top Finish: Finish
For back-painted glass top (G)
8Q folkstone greyA +$0
91 whiteA +$0
BK blackA +$0
WN warm grey neutralA +$0
Top Finish: Finish
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Top Finish: Solid-Color Laminate
For laminate top with vinyl edge (L)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BKM black matteA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
HT inner toneA +$0
LT light toneA +$0
LU soft whiteA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Top Finish: Recut Veneer
For veneer top with vinyl edge (C)
04 05 06 48
RA light ashA +$0 0 0 0
RK mahogany darkA +$0 0 0 0
RM mahoganyA +$0 0 0 0
Top Finish: Wood Veneer
For veneer top with vinyl edge (C)
04 05 06 48
2U light brown walnutA +$105 105 130 175
40 dark brown walnutA +$105 105 130 175
9N santos palisanderA +$380 380 720 839
A2 white ashA +$105 105 130 175
ED aged cherryA +$105 105 130 175
EK medium red walnutA +$105 105 130 175
EN ebonyA +$105 105 130 175
OU walnutA +$105 105 130 175
UL natural mapleA +$105 105 130 175
UX walnut on cherryA +$105 105 130 175
V2 beechA +$80 80 95 130
For veneer top with veneer edge (W)
04 05 06 48
RA light ashA +$0 0 0 0
RK mahogany darkA +$0 0 0 0
RM mahoganyA +$0 0 0 0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 95
Eames® Standing Height Table,Square continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 95
For veneer top with veneer edge (W)
04 05 06 48
2U light brown walnutA +$105 105 130 175
40 dark brown walnutA +$105 105 130 175
9N santos palisanderA +$380 380 720 839
A2 white ashA +$105 105 130 175
ED aged cherryA +$105 105 130 175
EK medium red walnutA +$105 105 130 175
EN ebonyA +$105 105 130 175
OU walnutA +$105 105 130 175
UL natural mapleA +$105 105 130 175
UX walnut on cherryA +$105 105 130 175
V2 beechA +$80 80 95 130
Step 8. Edge Finish
For laminate top with vinyl edge (L) or veneer top with vinyl edge (C)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Step 9. Grommet Finish
For 30" deep x 30" wide (04) or 36" deep x 36" wide (05) with single
center cutout (CC)
PA polished aluminumA +$0
For 42" deep x 42" wide (06) or 48" deep x 48" wide (48) with single
center cutout (CC)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
Step 10. Column Finish
91 whiteA +$0
BK blackA +$0
BU blackA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Step 11. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MS metallic silverA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
Eam
es®
Tabl
es=
==
96 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Square continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 96
Eames® Standing Height Table,Rectangular
Product Information
Description
This segmented base table has a laminate or veneer top with vinyl edge,
a veneer top and edge, a thin-profile HPL top with black edge, or a back-
painted glass top with modified bullnose edge. Table may be specified
with cutouts to accommodate simple power options (specified
separately). Each table has adjustable glides. Shipped knocked down.
Notes
60"-wide to 96"-wide tables have a 1-piece top and 2-column segmented
base. 60"-deep tables have a dual run of columns.
For veneer tables, 108"-wide to 192"-wide tops are shipped in 2 equal
pieces; 216"-wide and 264"-wide tops are shipped in 3 equal pieces.
For laminate tables, 108"-wide tables have a 1-piece top; 120"-wide to
216"-wide tops are shipped in 2 equal pieces; 240"-wide and 264"-wide
tops are shipped in 3 equal pieces.
Laminate and veneer tops are 11/4" thick.
Thin profile HPL tops are 1/2" thick.
Glass tops are back-painted, with a satin etch finish to reduce the
appearance of fingerprints. Tops up to 42"×78" are 1/2" thick; tops
42"×84" to 60"×120" are 3/8" thick with a Formcoat® substructure.
Tables may be specified with cutouts for power in various
configurations. Round cutouts align with columns, and oval cutouts are
centered between columns.
Order the following compatible power components separately:
• Round power module (ET991.)
• Oval power module (ET992.)
• Pair of oval power modules (ET993.)
• Oval power module & undermount power (ET994.)
• Pair of oval power modules & undermount power (ET995.)
Santos palisander veneer is celebrated for its unique grain and color
variations. Similar products ordered in multiples or dissimilar products
ordered separately should be expected to have variation in both grain
and color characteristics; no two products will look exactly alike.
Dimensions
HermanMiller Eames® Tables Price Book (2/18) 97
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 97
Specification Information
Step 1.
ETA
Step 2. Height
4 36" highA
5 42" highA
Step 3. Depth/Width
87R 30" deep x 60" wideA
88R 30" deep x 72" wideA
42R 36" deep x 60" wideA
43R 36" deep x 72" wideA
44R 36" deep x 84" wideA
89R 36" deep x 96" wideA
50R 42" deep x 66" wideA
51R 42" deep x 72" wideA
52R 42" deep x 78" wideA
45R 42" deep x 84" wideA
54R 48" deep x 84" wideA
47R 48" deep x 96" wideA
55R 54" deep x 90" wideA
56R 54" deep x 96" wideA
57R 54" deep x 108" wideA
58R 54" deep x 120" wideA
60R 54" deep x 144" wideA
61R 54" deep x 156" wideA
62R 54" deep x 168" wideA
64R 54" deep x 192" wideA
66R 54" deep x 216" wideA
68R 54" deep x 240" wideA
70R 54" deep x 264" wideA
71R 60" deep x 120" wideA
72R 60" deep x 144" wideA
73R 60" deep x 156" wideA
74R 60" deep x 168" wideA
75R 60" deep x 192" wideA
76R 60" deep x 216" wideA
77R 60" deep x 240" wideA
78R 60" deep x 264" wideA
Step 4. Base
S segmented baseA
Step 5. Surface Material
For 30" deep x 60" wide (87R), 30" deep x 72" wide (88R), 36" deep x
60" wide (42R), 36" deep x 72" wide (43R), 36" deep x 84" wide (44R),
36" deep x 96" wide (89R), 42" deep x 66" wide (50R), 42" deep x 72"
wide (51R), 42" deep x 78" wide (52R), 42" deep x 84" wide (45R), 48"
deep x 84" wide (54R), 48" deep x 96" wide (47R), 54" deep x 90" wide
(55R), or 54" deep x 96" wide (56R)
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
M thin profile HPL top with black edgeA
G back-painted glass topA
For 54" deep x 108" wide (57R), 54" deep x 120" wide (58R), or 60"
deep x 120" wide (71R)
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
G back-painted glass topA
For 54" deep x 144" wide (60R), 54" deep x 156" wide (61R), 54" deep x
168" wide (62R), 54" deep x 192" wide (64R), 54" deep x 216" wide
(66R), 54" deep x 240" wide (68R), 54" deep x 264" wide (70R), 60"
deep x 144" wide (72R), 60" deep x 156" wide (73R), 60" deep x 168"
wide (74R), 60" deep x 192" wide (75R), 60" deep x 216" wide (76R), 60"
deep x 240" wide (77R), or 60" deep x 264" wide (78R)
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
Step 6. Grommets
For 30" deep x 60" wide (87R), 30" deep x 72" wide (88R), 36" deep x
60" wide (42R), 36" deep x 72" wide (43R), 36" deep x 84" wide (44R),
36" deep x 96" wide (89R), 42" deep x 66" wide (50R), 42" deep x 72"
wide (51R), 42" deep x 78" wide (52R), 42" deep x 84" wide (45R), 48"
deep x 84" wide (54R), 48" deep x 96" wide (47R), 54" deep x 90" wide
(55R), 54" deep x 96" wide (56R), or 54" deep x 108" wide (57R)
NG no grommetA
C2 2 round cutouts, over columnsA
CR single centered oval cutoutA
CA 2 round cutouts and center oval cutoutA
Eam
es®
Tabl
es=
==
98 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 98
For 54" deep x 120" wide (58R), 54" deep x 144" wide (60R), 54" deep x
156" wide (61R), 54" deep x 168" wide (62R), 60" deep x 120" wide
(71R), 60" deep x 144" wide (72R), 60" deep x 156" wide (73R), or 60"
deep x 168" wide (74R)
NG no grommetA
C2 2 round cutouts, over columnsA
CM 2 oval cutoutsA
CB 2 round cutouts and 2 oval cutoutsA
For 54" deep x 192" wide (64R) or 60" deep x 192" wide (75R)
NG no grommetA
C2 2 round cutouts, over columnsA
CP 3 oval cutoutsA
CE 2 round cutouts and 3 oval cutoutsA
For 54" deep x 216" wide (66R), 54" deep x 240" wide (68R), 54" deep x
264" wide (70R), 60" deep x 216" wide (76R), 60" deep x 240" wide
(77R), or 60" deep x 264" wide (78R)
NG no grommetA
C3 3 round cutouts, over columnsA
CN 4 oval cutoutsA
CD 3 round cutouts and 4 oval cutoutsA
Prices for Steps 1-6.
NG C2 C3 CM CN CP
ET487R S L $1861 2321 — — — —
C $2240 2700 — — — —
W $2400 2860 — — — —
M $3380 3840 — — — —
G $6850 7630 — — — —
CR CA CB CD CE
ET487R S L $2091 2551 — — —
C $2470 2930 — — —
W $2630 3090 — — —
M $3610 4070 — — —
G $7670 8460 — — —
NG C2 C3 CM CN CP
ET488R S L $1982 2442 — — — —
C $2420 2880 — — — —
W $2660 3120 — — — —
M $3400 3860 — — — —
G $7700 8490 — — — —
CR CA CB CD CE
ET488R S L $2212 2672 — — —
C $2650 3110 — — —
W $2890 3350 — — —
M $3630 4090 — — —
G $8520 9310 — — —
NG C2 C3 CM CN CP
ET442R S L $2079 2539 — — — —
C $2470 2930 — — — —
W $2664 3124 — — — —
M $4060 4520 — — — —
G $7700 8490 — — — —
CR CA CB CD CE
ET442R S L $2309 2769 — — —
C $2700 3160 — — —
W $2894 3354 — — —
M $4290 4750 — — —
G $8520 9310 — — —
NG C2 C3 CM CN CP
ET443R S L $2126 2586 — — — —
C $2540 3000 — — — —
W $2770 3230 — — — —
M $4080 4540 — — — —
G $8720 9500 — — — —
CR CA CB CD CE
ET443R S L $2356 2816 — — —
C $2770 3230 — — —
W $3000 3460 — — —
M $4310 4770 — — —
G $9540 10330 — — —
NG C2 C3 CM CN CP
ET444R S L $2214 2674 — — — —
C $2720 3180 — — — —
W $3010 3470 — — — —
M $4110 4570 — — — —
G $9730 10520 — — — —
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 99
Eames® Standing Height Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 99
CR CA CB CD CE
ET444R S L $2444 2904 — — —
C $2950 3410 — — —
W $3240 3700 — — —
M $4340 4800 — — —
G $10560 11340 — — —
NG C2 C3 CM CN CP
ET489R S L $2357 2817 — — — —
C $2880 3340 — — — —
W $3090 3550 — — — —
M $4130 4590 — — — —
G $10820 11610 — — — —
CR CA CB CD CE
ET489R S L $2587 3047 — — —
C $3110 3570 — — —
W $3320 3780 — — —
M $4360 4820 — — —
G $11650 12430 — — —
NG C2 C3 CM CN CP
ET450R S L $2449 2909 — — — —
C $2810 3270 — — — —
W $3140 3600 — — — —
M $4090 4550 — — — —
G $9120 9910 — — — —
CR CA CB CD CE
ET450R S L $2679 3139 — — —
C $3040 3500 — — —
W $3370 3830 — — —
M $4320 4780 — — —
G $9950 10730 — — —
NG C2 C3 CM CN CP
ET451R S L $2517 2977 — — — —
C $2846 3306 — — — —
W $3167 3627 — — — —
M $4100 4560 — — — —
G $9730 10520 — — — —
CR CA CB CD CE
ET451R S L $2747 3207 — — —
C $3076 3536 — — —
W $3397 3857 — — —
M $4330 4790 — — —
G $10560 11340 — — —
NG C2 C3 CM CN CP
ET452R S L $2566 3026 — — — —
C $2969 3429 — — — —
W $3269 3729 — — — —
M $6480 6940 — — — —
G $10350 11130 — — — —
CR CA CB CD CE
ET452R S L $2796 3256 — — —
C $3199 3659 — — —
W $3499 3959 — — —
M $6710 7170 — — —
G $11170 11960 — — —
NG C2 C3 CM CN CP
ET445R S L $2594 3054 — — — —
C $2998 3458 — — — —
W $3304 3764 — — — —
M $6480 6940 — — — —
G $11300 12620 — — — —
CR CA CB CD CE
ET445R S L $2824 3284 — — —
C $3228 3688 — — —
W $3534 3994 — — —
M $6710 7170 — — —
G $12480 13810 — — —
NG C2 C3 CM CN CP
ET454R S L $2894 3354 — — — —
C $3309 3769 — — — —
W $3609 4069 — — — —
M $6500 6960 — — — —
G $12690 14020 — — — —
Eam
es®
Tabl
es=
==
100 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 100
CR CA CB CD CE
ET454R S L $3124 3584 — — —
C $3539 3999 — — —
W $3839 4299 — — —
M $6730 7190 — — —
G $13880 15200 — — —
NG C2 C3 CM CN CP
ET447R S L $2953 3413 — — — —
C $3373 3833 — — — —
W $3723 4183 — — — —
M $6530 6990 — — — —
G $14290 15640 — — — —
CR CA CB CD CE
ET447R S L $3183 3643 — — —
C $3603 4063 — — —
W $3953 4413 — — —
M $6760 7220 — — —
G $15480 16800 — — —
NG C2 C3 CM CN CP
ET455R S L $3465 3925 — — — —
C $3908 4368 — — — —
W $4308 4768 — — — —
M $6530 6990 — — — —
G $14980 16310 — — — —
CR CA CB CD CE
ET455R S L $3695 4155 — — —
C $4138 4598 — — —
W $4538 4998 — — —
M $6760 7220 — — —
G $16240 17500 — — —
NG C2 C3 CM CN CP
ET456R S L $3506 3966 — — — —
C $4028 4488 — — — —
W $4478 4938 — — — —
M $6550 7010 — — — —
G $15880 17210 — — — —
CR CA CB CD CE
ET456R S L $3736 4196 — — —
C $4258 4718 — — —
W $4708 5168 — — —
M $6780 7240 — — —
G $17070 18400 — — —
NG C2 C3 CM CN CP
ET457R S L $4501 4961 — — — —
C $4994 5454 — — — —
W $5519 5979 — — — —
G $17680 19010 — — — —
CR CA CB CD CE
ET457R S L $4731 5191 — — —
C $5224 5684 — — —
W $5749 6209 — — —
G $18870 20200 — — —
NG C2 C3 CM CN CP
ET458R S L $5084 5544 — 5544 — —
C $5674 6134 — 6134 — —
W $6274 6734 — 6734 — —
G $20200 21520 — 21570 — —
CR CA CB CD CE
ET458R S L — — $6004 — —
C — — $6594 — —
W — — $7194 — —
G — —$22900 — —
NG C2 C3 CM CN CP
ET460R S L $5483 5943 — 5943 — —
C $6091 6551 — 6551 — —
W $6791 7251 — 7251 — —
CR CA CB CD CE
ET460R S L — — $6403 — —
C — — $7011 — —
W — — $7711 — —
NG C2 C3 CM CN CP
ET461R S L $5933 6393 — 6393 — —
C $6564 7024 — 7024 — —
W $7339 7799 — 7799 — —
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 101
Eames® Standing Height Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 101
CR CA CB CD CE
ET461R S L — — $6853 — —
C — — $7484 — —
W — — $8259 — —
NG C2 C3 CM CN CP
ET462R S L $6472 6932 — 6932 — —
C $7201 7661 — 7661 — —
W $8051 8511 — 8511 — —
CR CA CB CD CE
ET462R S L — — $7392 — —
C — — $8121 — —
W — — $8971 — —
NG C2 C3 CM CN CP
ET464R S L $7214 7674 — — — 7904
C $8117 8577 — — — 8807
W $9067 9527 — — — 9757
CR CA CB CD CE
ET464R S L — — — — $8364
C — — — — $9267
W — — — — $10217
NG C2 C3 CM CN CP
ET466R S L $8006 — 8696 — 8926 —
C $8940 — 9630 — 9860 —
W $9990 — 10680 — 10910 —
CR CA CB CD CE
ET466R S L — — — $9616 —
C — — — $10550 —
W — — — $11600 —
NG C2 C3 CM CN CP
ET468R S L $8780 — 9470 — 9700 —
C $9752 — 10442 — 10672 —
W $10902 — 11592 — 11822 —
CR CA CB CD CE
ET468R S L — — — $10390 —
C — — — $11362 —
W — — — $12512 —
NG C2 C3 CM CN CP
ET470R S L $9533 — 10223 — 10453 —
C $10685 — 11375 — 11605 —
W $11935 — 12625 — 12855 —
CR CA CB CD CE
ET470R S L — — — $11143 —
C — — — $12295 —
W — — — $13545 —
NG C2 C3 CM CN CP
ET471R S L $9500 9960 — 9960 — —
C $11500 11960 — 11960 — —
W $12200 12660 — 12660 — —
G $25030 26350 — 26400 — —
CR CA CB CD CE
ET471R S L — — $10420 — —
C — — $12420 — —
W — — $13120 — —
G — —$27730 — —
NG C2 C3 CM CN CP
ET472R S L $9899 10359 — 10359 — —
C $12100 12560 — 12560 — —
W $12900 13360 — 13360 — —
CR CA CB CD CE
ET472R S L — — $10819 — —
C — — $13020 — —
W — — $13820 — —
NG C2 C3 CM CN CP
ET473R S L $10199 10659 — 10659 — —
C $12600 13060 — 13060 — —
W $13475 13935 — 13935 — —
CR CA CB CD CE
ET473R S L — — $11119 — —
C — — $13520 — —
W — — $14395 — —
NG C2 C3 CM CN CP
ET474R S L $10599 11059 — 11059 — —
C $13200 13660 — 13660 — —
W $14150 14610 — 14610 — —
Eam
es®
Tabl
es=
==
102 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 102
CR CA CB CD CE
ET474R S L — — $11519 — —
C — — $14120 — —
W — — $15070 — —
NG C2 C3 CM CN CP
ET475R S L $12600 13060 — — — 13290
C $17600 18060 — — — 18290
W $18650 19110 — — — 19340
CR CA CB CD CE
ET475R S L — — — — $13750
C — — — — $18750
W — — — — $19800
NG C2 C3 CM CN CP
ET476R S L $15300 — 15990 — 16220 —
C $21900 — 22590 — 22820 —
W $23050 — 23740 — 23970 —
CR CA CB CD CE
ET476R S L — — — $16910 —
C — — — $23510 —
W — — —$24660 —
NG C2 C3 CM CN CP
ET477R S L $16600 — 17290 — 17520 —
C $23300 — 23990 — 24220 —
W $24550 — 25240 — 25470 —
CR CA CB CD CE
ET477R S L — — — $18210 —
C — — — $24910 —
W — — — $26160 —
NG C2 C3 CM CN CP
ET478R S L $16900 — 17590 — 17820 —
C $24200 — 24890 — 25120 —
W $25550 — 26240 — 26470 —
CR CA CB CD CE
ET478R S L — — — $18510 —
C — — — $25810 —
W — — — $27160 —
NG C2 C3 CM CN CP
ET587R S L $1861 2321 — — — —
C $2240 2700 — — — —
W $2400 2860 — — — —
M $3380 3840 — — — —
G $6850 7630 — — — —
CR CA CB CD CE
ET587R S L $2091 2551 — — —
C $2470 2930 — — —
W $2630 3090 — — —
M $3610 4070 — — —
G $7670 8460 — — —
NG C2 C3 CM CN CP
ET588R S L $1982 2442 — — — —
C $2420 2880 — — — —
W $2660 3120 — — — —
M $3400 3860 — — — —
G $7700 8490 — — — —
CR CA CB CD CE
ET588R S L $2212 2672 — — —
C $2650 3110 — — —
W $2890 3350 — — —
M $3630 4090 — — —
G $8520 9310 — — —
NG C2 C3 CM CN CP
ET542R S L $2079 2539 — — — —
C $2470 2930 — — — —
W $2664 3124 — — — —
M $4060 4520 — — — —
G $7700 8490 — — — —
CR CA CB CD CE
ET542R S L $2309 2769 — — —
C $2700 3160 — — —
W $2894 3354 — — —
M $4290 4750 — — —
G $8520 9310 — — —
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 103
Eames® Standing Height Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 103
NG C2 C3 CM CN CP
ET543R S L $2126 2586 — — — —
C $2540 3000 — — — —
W $2770 3230 — — — —
M $4080 4540 — — — —
G $8720 9500 — — — —
CR CA CB CD CE
ET543R S L $2356 2816 — — —
C $2770 3230 — — —
W $3000 3460 — — —
M $4310 4770 — — —
G $9540 10330 — — —
NG C2 C3 CM CN CP
ET544R S L $2214 2674 — — — —
C $2720 3180 — — — —
W $3010 3470 — — — —
M $4110 4570 — — — —
G $9730 10520 — — — —
CR CA CB CD CE
ET544R S L $2444 2904 — — —
C $2950 3410 — — —
W $3240 3700 — — —
M $4340 4800 — — —
G $10560 11340 — — —
NG C2 C3 CM CN CP
ET589R S L $2357 2817 — — — —
C $2880 3340 — — — —
W $3090 3550 — — — —
M $4130 4590 — — — —
G $10820 11610 — — — —
CR CA CB CD CE
ET589R S L $2587 3047 — — —
C $3110 3570 — — —
W $3320 3780 — — —
M $4360 4820 — — —
G $11650 12430 — — —
NG C2 C3 CM CN CP
ET550R S L $2449 2909 — — — —
C $2810 3270 — — — —
W $3140 3600 — — — —
M $4090 4550 — — — —
G $9120 9910 — — — —
CR CA CB CD CE
ET550R S L $2679 3139 — — —
C $3040 3500 — — —
W $3370 3830 — — —
M $4320 4780 — — —
G $9950 10730 — — —
NG C2 C3 CM CN CP
ET551R S L $2517 2977 — — — —
C $2846 3306 — — — —
W $3167 3627 — — — —
M $4100 4560 — — — —
G $9730 10520 — — — —
CR CA CB CD CE
ET551R S L $2747 3207 — — —
C $3076 3536 — — —
W $3397 3857 — — —
M $4330 4790 — — —
G $10560 11340 — — —
NG C2 C3 CM CN CP
ET552R S L $2566 3026 — — — —
C $2969 3429 — — — —
W $3269 3729 — — — —
M $6480 6940 — — — —
G $10350 11130 — — — —
CR CA CB CD CE
ET552R S L $2796 3256 — — —
C $3199 3659 — — —
W $3499 3959 — — —
M $6710 7170 — — —
G $11170 11960 — — —
Eam
es®
Tabl
es=
==
104 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 104
NG C2 C3 CM CN CP
ET545R S L $2594 3054 — — — —
C $2998 3458 — — — —
W $3304 3764 — — — —
M $6480 6940 — — — —
G $11300 12620 — — — —
CR CA CB CD CE
ET545R S L $2824 3284 — — —
C $3228 3688 — — —
W $3534 3994 — — —
M $6710 7170 — — —
G $12480 13810 — — —
NG C2 C3 CM CN CP
ET554R S L $2894 3354 — — — —
C $3309 3769 — — — —
W $3609 4069 — — — —
M $6500 6960 — — — —
G $12690 14020 — — — —
CR CA CB CD CE
ET554R S L $3124 3584 — — —
C $3539 3999 — — —
W $3839 4299 — — —
M $6730 7190 — — —
G $13880 15200 — — —
NG C2 C3 CM CN CP
ET547R S L $2953 3413 — — — —
C $3373 3833 — — — —
W $3723 4183 — — — —
M $6530 6990 — — — —
G $14290 15640 — — — —
CR CA CB CD CE
ET547R S L $3183 3643 — — —
C $3603 4063 — — —
W $3953 4413 — — —
M $6760 7220 — — —
G $15480 16800 — — —
NG C2 C3 CM CN CP
ET555R S L $3465 3925 — — — —
C $3908 4368 — — — —
W $4308 4768 — — — —
M $6530 6990 — — — —
G $14980 16310 — — — —
CR CA CB CD CE
ET555R S L $3695 4155 — — —
C $4138 4598 — — —
W $4538 4998 — — —
M $6760 7220 — — —
G $16240 17500 — — —
NG C2 C3 CM CN CP
ET556R S L $3506 3966 — — — —
C $4028 4488 — — — —
W $4478 4938 — — — —
M $6550 7010 — — — —
G $15880 17210 — — — —
CR CA CB CD CE
ET556R S L $3736 4196 — — —
C $4258 4718 — — —
W $4708 5168 — — —
M $6780 7240 — — —
G $17070 18400 — — —
NG C2 C3 CM CN CP
ET557R S L $4501 4961 — — — —
C $4994 5454 — — — —
W $5519 5979 — — — —
G $17680 19010 — — — —
CR CA CB CD CE
ET557R S L $4731 5191 — — —
C $5224 5684 — — —
W $5749 6209 — — —
G $18870 20200 — — —
NG C2 C3 CM CN CP
ET558R S L $5084 5544 — 5544 — —
C $5674 6134 — 6134 — —
W $6274 6734 — 6734 — —
G $20200 21520 — 21570 — —
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 105
Eames® Standing Height Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 105
CR CA CB CD CE
ET558R S L — — $6004 — —
C — — $6594 — —
W — — $7194 — —
G — —$22900 — —
NG C2 C3 CM CN CP
ET560R S L $5483 5943 — 5943 — —
C $6091 6551 — 6551 — —
W $6791 7251 — 7251 — —
CR CA CB CD CE
ET560R S L — — $6403 — —
C — — $7011 — —
W — — $7711 — —
NG C2 C3 CM CN CP
ET561R S L $5933 6393 — 6393 — —
C $6564 7024 — 7024 — —
W $7339 7799 — 7799 — —
CR CA CB CD CE
ET561R S L — — $6853 — —
C — — $7484 — —
W — — $8259 — —
NG C2 C3 CM CN CP
ET562R S L $6472 6932 — 6932 — —
C $7201 7661 — 7661 — —
W $8051 8511 — 8511 — —
CR CA CB CD CE
ET562R S L — — $7392 — —
C — — $8121 — —
W — — $8971 — —
NG C2 C3 CM CN CP
ET564R S L $7214 7674 — — — 7904
C $8117 8577 — — — 8807
W $9067 9527 — — — 9757
CR CA CB CD CE
ET564R S L — — — — $8364
C — — — — $9267
W — — — — $10217
NG C2 C3 CM CN CP
ET566R S L $8006 — 8696 — 8926 —
C $8940 — 9630 — 9860 —
W $9990 — 10680 — 10910 —
CR CA CB CD CE
ET566R S L — — — $9616 —
C — — — $10550 —
W — — — $11600 —
NG C2 C3 CM CN CP
ET568R S L $8780 — 9470 — 9700 —
C $9752 — 10442 — 10672 —
W $10902 — 11592 — 11822 —
CR CA CB CD CE
ET568R S L — — — $10390 —
C — — — $11362 —
W — — — $12512 —
NG C2 C3 CM CN CP
ET570R S L $9533 — 10223 — 10453 —
C $10685 — 11375 — 11605 —
W $11935 — 12625 — 12855 —
CR CA CB CD CE
ET570R S L — — — $11143 —
C — — — $12295 —
W — — — $13545 —
NG C2 C3 CM CN CP
ET571R S L $9500 9960 — 9960 — —
C $11500 11960 — 11960 — —
W $12200 12660 — 12660 — —
G $25030 26350 — 26400 — —
CR CA CB CD CE
ET571R S L — — $10420 — —
C — — $12420 — —
W — — $13120 — —
G — —$27730 — —
NG C2 C3 CM CN CP
ET572R S L $9899 10359 — 10359 — —
C $12100 12560 — 12560 — —
W $12900 13360 — 13360 — —
Eam
es®
Tabl
es=
==
106 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 106
CR CA CB CD CE
ET572R S L — — $10819 — —
C — — $13020 — —
W — — $13820 — —
NG C2 C3 CM CN CP
ET573R S L $10199 10659 — 10659 — —
C $12600 13060 — 13060 — —
W $13475 13935 — 13935 — —
CR CA CB CD CE
ET573R S L — — $11119 — —
C — — $13520 — —
W — — $14395 — —
NG C2 C3 CM CN CP
ET574R S L $10599 11059 — 11059 — —
C $13200 13660 — 13660 — —
W $14150 14610 — 14610 — —
CR CA CB CD CE
ET574R S L — — $11519 — —
C — — $14120 — —
W — — $15070 — —
NG C2 C3 CM CN CP
ET575R S L $12600 13060 — — — 13290
C $17600 18060 — — — 18290
W $18650 19110 — — — 19340
CR CA CB CD CE
ET575R S L — — — — $13750
C — — — — $18750
W — — — — $19800
NG C2 C3 CM CN CP
ET576R S L $15300 — 15990 — 16220 —
C $21900 — 22590 — 22820 —
W $23050 — 23740 — 23970 —
CR CA CB CD CE
ET576R S L — — — $16910 —
C — — — $23510 —
W — — —$24660 —
NG C2 C3 CM CN CP
ET577R S L $16600 — 17290 — 17520 —
C $23300 — 23990 — 24220 —
W $24550 — 25240 — 25470 —
CR CA CB CD CE
ET577R S L — — — $18210 —
C — — — $24910 —
W — — — $26160 —
NG C2 C3 CM CN CP
ET578R S L $16900 — 17590 — 17820 —
C $24200 — 24890 — 25120 —
W $25550 — 26240 — 26470 —
CR CA CB CD CE
ET578R S L — — — $18510 —
C — — — $25810 —
W — — — $27160 —
Step 7.
Top Finish: Finish
For back-painted glass top (G)
8Q folkstone greyA +$0
91 whiteA +$0
BK blackA +$0
WN warm grey neutralA +$0
Top Finish: Finish
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 107
Eames® Standing Height Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 107
Top Finish: Solid-Color Laminate
For laminate top with vinyl edge (L)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BKM black matteA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
HT inner toneA +$0
LT light toneA +$0
LU soft whiteA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Top Finish: Recut Veneer
For veneer top with vinyl edge (C)
87R 88R 42R 43R 44R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
89R 50R 51R 52R 45R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
54R 47R 55R 56R 57R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
58R 60R 61R 62R 64R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
66R 68R 70R 71R 72R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
73R 74R 75R 76R 77R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
78R
RA light ashA +$0
RK mahogany darkA +$0
RM mahoganyA +$0
Top Finish: Wood Veneer
For veneer top with vinyl edge (C)
87R 88R 42R 43R 44R
2U +$250 265 265 290 305light brown
walnutA
40 +$250 265 265 290 305dark brown
walnutA
9N +$950 1009 1009 1104 1161santos palisanderA
A2 white ashA +$250 265 265 290 305
ED aged cherryA +$250 265 265 290 305
EK +$250 265 265 290 305medium red
walnutA
EN ebonyA +$250 265 265 290 305
OU walnutA +$250 265 265 290 305
UL natural mapleA +$250 265 265 290 305
UX +$250 265 265 290 305walnut on cherryA
V2 beechA +$190 205 205 215 225
89R 50R 51R 52R 45R
2U +$330 290 305 330 330light brown
walnutA
40 +$330 290 305 330 330dark brown
walnutA
9N +$1420 1160 1220 1320 1320santos palisanderA
A2 white ashA +$330 290 305 330 330
ED aged cherryA +$330 290 305 330 330
EK +$330 290 305 330 330medium red
walnutA
EN ebonyA +$330 290 305 330 330
OU walnutA +$330 290 305 330 330
UL natural mapleA +$330 290 305 330 330
UX +$330 290 305 330 330walnut on cherryA
V2 beechA +$245 215 225 245 245
54R 47R 55R 56R 57R
2U +$385 385 425 440 500light brown
walnutA
40 +$385 385 425 440 500dark brown
walnutA
9N +$1656 1656 1700 1760 2350santos palisanderA
A2 white ashA +$385 385 425 440 500
ED aged cherryA +$385 385 425 440 500
EK +$385 385 425 440 500medium red
walnutA
EN ebonyA +$385 385 425 440 500
OU walnutA +$385 385 425 440 500
UL natural mapleA +$385 385 425 440 500
UX +$385 385 425 440 500walnut on cherryA
V2 beechA +$280 280 290 315 345
Eam
es®
Tabl
es=
==
108 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 108
58R 60R 61R 62R 64R
2U +$540 585 635 690 755light brown
walnutA
40 +$540 585 635 690 755dark brown
walnutA
9N +$2538 2750 3175 3450 3775santos palisanderA
A2 white ashA +$540 585 635 690 755
ED aged cherryA +$540 585 635 690 755
EK +$540 585 635 690 755medium red
walnutA
EN ebonyA +$540 585 635 690 755
OU walnutA +$540 585 635 690 755
UL natural mapleA +$540 585 635 690 755
UX +$540 585 635 690 755walnut on cherryA
V2 beechA +$375 410 445 480 520
66R 68R 70R 71R 72R
2U +$815 880 950 680 740light brown
walnutA
40 +$815 880 950 680 740dark brown
walnutA
9N +$4075 4400 5320 3180 3440santos palisanderA
A2 white ashA +$815 880 950 680 740
ED aged cherryA +$815 880 950 680 740
EK +$815 880 950 680 740medium red
walnutA
EN ebonyA +$815 880 950 680 740
OU walnutA +$815 880 950 680 740
UL natural mapleA +$815 880 950 680 740
UX +$815 880 950 680 740walnut on cherryA
V2 beechA +$560 600 650 470 520
73R 74R 75R 76R 77R
2U +$800 870 950 1020 1100light brown
walnutA
40 +$800 870 950 1020 1100dark brown
walnutA
9N +$3970 4320 4720 5100 5500santos palisanderA
A2 white ashA +$800 870 950 1020 1100
ED aged cherryA +$800 870 950 1020 1100
EK +$800 870 950 1020 1100medium red
walnutA
EN ebonyA +$800 870 950 1020 1100
OU walnutA +$800 870 950 1020 1100
UL natural mapleA +$800 870 950 1020 1100
UX +$800 870 950 1020 1100walnut on cherryA
V2 beechA +$560 600 650 700 750
78R
2U light brown walnutA +$1190
40 dark brown walnutA +$1190
9N santos palisanderA +$6650
A2 white ashA +$1190
ED aged cherryA +$1190
EK medium red walnutA +$1190
EN ebonyA +$1190
OU walnutA +$1190
UL natural mapleA +$1190
UX walnut on cherryA +$1190
V2 beechA +$820
For veneer top with veneer edge (W)
87R 88R 42R 43R 44R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
89R 50R 51R 52R 45R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
54R 47R 55R 56R 57R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
58R 60R 61R 62R 64R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
66R 68R 70R 71R 72R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
73R 74R 75R 76R 77R
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
78R
RA light ashA +$0
RK mahogany darkA +$0
RM mahoganyA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 109
Eames® Standing Height Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 109
For veneer top with veneer edge (W)
87R 88R 42R 43R 44R
V2 beechA +$190 205 205 215 225
2U +$250 265 265 290 305light brown
walnutA
A2 white ashA +$250 265 265 290 305
40 +$250 265 265 290 305dark brown
walnutA
ED aged cherryA +$250 265 265 290 305
EK +$250 265 265 290 305medium red
walnutA
EN ebonyA +$250 265 265 290 305
OU walnutA +$250 265 265 290 305
UL natural mapleA +$250 265 265 290 305
UX +$250 265 265 290 305walnut on cherryA
9N +$950 1009 1009 1104 1161santos palisanderA
89R 50R 51R 52R 45R
V2 beechA +$245 215 225 245 245
2U +$330 290 305 330 330light brown
walnutA
A2 white ashA +$330 290 305 330 330
40 +$330 290 305 330 330dark brown
walnutA
ED aged cherryA +$330 290 305 330 330
EK +$330 290 305 330 330medium red
walnutA
EN ebonyA +$330 290 305 330 330
OU walnutA +$330 290 305 330 330
UL natural mapleA +$330 290 305 330 330
UX +$330 290 305 330 330walnut on cherryA
9N +$1420 1160 1220 1320 1320santos palisanderA
54R 47R 55R 56R 57R
V2 beechA +$280 280 290 315 345
2U +$385 385 425 440 500light brown
walnutA
A2 white ashA +$385 385 425 440 500
40 +$385 385 425 440 500dark brown
walnutA
ED aged cherryA +$385 385 425 440 500
EK +$385 385 425 440 500medium red
walnutA
EN ebonyA +$385 385 425 440 500
OU walnutA +$385 385 425 440 500
UL natural mapleA +$385 385 425 440 500
UX +$385 385 425 440 500walnut on cherryA
9N +$1656 1656 1700 1760 2350santos palisanderA
58R 60R 61R 62R 64R
V2 beechA +$375 410 445 480 520
2U +$540 585 635 690 755light brown
walnutA
A2 white ashA +$540 585 635 690 755
40 +$540 585 635 690 755dark brown
walnutA
ED aged cherryA +$540 585 635 690 755
EK +$540 585 635 690 755medium red
walnutA
EN ebonyA +$540 585 635 690 755
OU walnutA +$540 585 635 690 755
UL natural mapleA +$540 585 635 690 755
UX +$540 585 635 690 755walnut on cherryA
9N +$2538 2750 3175 3450 3775santos palisanderA
Eam
es®
Tabl
es=
==
110 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 110
66R 68R 70R 71R 72R
V2 beechA +$560 600 650 470 520
2U +$815 880 950 680 740light brown
walnutA
A2 white ashA +$815 880 950 680 740
40 +$815 880 950 680 740dark brown
walnutA
ED aged cherryA +$815 880 950 680 740
EK +$815 880 950 680 740medium red
walnutA
EN ebonyA +$815 880 950 680 740
OU walnutA +$815 880 950 680 740
UL natural mapleA +$815 880 950 680 740
UX +$815 880 950 680 740walnut on cherryA
9N +$4075 4400 5320 3180 3440santos palisanderA
73R 74R 75R 76R 77R
V2 beechA +$560 600 650 700 750
2U +$800 870 950 1020 1100light brown
walnutA
A2 white ashA +$800 870 950 1020 1100
40 +$800 870 950 1020 1100dark brown
walnutA
ED aged cherryA +$800 870 950 1020 1100
EK +$800 870 950 1020 1100medium red
walnutA
EN ebonyA +$800 870 950 1020 1100
OU walnutA +$800 870 950 1020 1100
UL natural mapleA +$800 870 950 1020 1100
UX +$800 870 950 1020 1100walnut on cherryA
9N +$3970 4320 4720 5100 5500santos palisanderA
78R
V2 beechA +$820
2U light brown walnutA +$1190
A2 white ashA +$1190
40 dark brown walnutA +$1190
ED aged cherryA +$1190
EK medium red walnutA +$1190
EN ebonyA +$1190
OU walnutA +$1190
UL natural mapleA +$1190
UX walnut on cherryA +$1190
9N santos palisanderA +$6650
Step 8. Edge Finish
For laminate top with vinyl edge (L) or veneer top with vinyl edge (C)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Step 9. Grommet Finish
For 2 round cutouts, over columns (C2) or 3 round cutouts, over
columns (C3)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
For single centered oval cutout (CR) or 2 round cutouts and center oval
cutout (CA)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$150
For 2 oval cutouts (CM) or 2 round cutouts and 2 oval cutouts (CB)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$300
For 3 oval cutouts (CP) or 2 round cutouts and 3 oval cutouts (CE)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$450
For 4 oval cutouts (CN) or 3 round cutouts and 4 oval cutouts (CD)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
PA polished aluminumA +$600
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 111
Eames® Standing Height Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 111
Step 10. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Step 11. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Eam
es®
Tabl
es=
==
112 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 112
Eames® Standing Height Table,Oval
Product Information
Description
This segmented base table has a laminate or veneer top with vinyl edge,
a veneer top and edge, a thin-profile HPL top with black edge, or a back-
painted glass top with modified bullnose edge. Table may be specified
with cutouts to accommodate simple power options (specified
separately). Each table has adjustable glides. Shipped knocked down.
Notes
60"-wide to 96"-wide tables have a 1-piece top and 2-column segmented
base. 60"-deep tables have a dual run of columns.
For veneer tables, 108"-wide to 192"-wide tops are shipped in 2 equal
pieces; 216"-wide and 264"-wide tops are shipped in 3 equal pieces.
For laminate tables, 108"-wide tables have a 1-piece top; 120"-wide to
216"-wide tops are shipped in 2 equal pieces; 240"-wide and 264"-wide
tops are shipped in 3 equal pieces.
Laminate and veneer tops are 11/4" thick.
Thin profile HPL tops are 1/2" thick.
Glass tops are back-painted, with a satin etch finish to reduce the
appearance of fingerprints. Tops up to 42"×78" are 1/2" thick; tops
42"×84" to 60"×120" are 3/8" thick with a Formcoat® substructure.
Tables may be specified with cutouts for power in various
configurations. Round cutouts align with columns, and oval cutouts are
centered between columns.
Order the following compatible power components separately:
• Round power module (ET991.)
• Oval power module (ET992.)
• Pair of oval power modules (ET993.)
• Oval power module & undermount power (ET994.)
• Pair of oval power modules & undermount power (ET995.)
Santos palisander veneer is celebrated for its unique grain and color
variations. Similar products ordered in multiples or dissimilar products
ordered separately should be expected to have variation in both grain
and color characteristics; no two products will look exactly alike.
Dimensions
HermanMiller Eames® Tables Price Book (2/18) 113
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 113
Specification Information
Step 1.
ETA
Step 2. Height
4 36" highA
5 42" highA
Step 3. Depth/Width
87V 30" deep x 60" wideA
88V 30" deep x 72" wideA
49V 36" deep x 60" wideA
43V 36" deep x 72" wideA
44V 36" deep x 84" wideA
89V 36" deep x 96" wideA
50V 42" deep x 66" wideA
51V 42" deep x 72" wideA
52V 42" deep x 78" wideA
53V 42" deep x 84" wideA
54V 48" deep x 84" wideA
47V 48" deep x 96" wideA
55V 54" deep x 90" wideA
56V 54" deep x 96" wideA
57V 54" deep x 108" wideA
58V 54" deep x 120" wideA
60V 54" deep x 144" wideA
61V 54" deep x 156" wideA
62V 54" deep x 168" wideA
64V 54" deep x 192" wideA
66V 54" deep x 216" wideA
68V 54" deep x 240" wideA
70V 54" deep x 264" wideA
71V 60" deep x 120" wideA
72V 60" deep x 144" wideA
73V 60" deep x 156" wideA
74V 60" deep x 168" wideA
75V 60" deep x 192" wideA
76V 60" deep x 216" wideA
77V 60" deep x 240" wideA
78V 60" deep x 264" wideA
Step 4. Base
S segmented baseA
Step 5. Surface Material
For 30" deep x 60" wide (87V), 30" deep x 72" wide (88V), 36" deep x
60" wide (49V), 36" deep x 72" wide (43V), 36" deep x 84" wide (44V),
36" deep x 96" wide (89V), 42" deep x 66" wide (50V), 42" deep x 72"
wide (51V), 42" deep x 78" wide (52V), 42" deep x 84" wide (53V), 48"
deep x 84" wide (54V), 48" deep x 96" wide (47V), 54" deep x 90" wide
(55V), or 54" deep x 96" wide (56V)
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
M thin profile HPL top with black edgeA
G back-painted glass topA
For 54" deep x 108" wide (57V), 54" deep x 120" wide (58V), or 60"
deep x 120" wide (71V)
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
G back-painted glass topA
For 54" deep x 144" wide (60V), 54" deep x 156" wide (61V), 54" deep x
168" wide (62V), 54" deep x 192" wide (64V), 54" deep x 216" wide
(66V), 54" deep x 240" wide (68V), 54" deep x 264" wide (70V), 60"
deep x 144" wide (72V), 60" deep x 156" wide (73V), 60" deep x 168"
wide (74V), 60" deep x 192" wide (75V), 60" deep x 216" wide (76V),
60" deep x 240" wide (77V), or 60" deep x 264" wide (78V)
L laminate top with vinyl edgeA
C veneer top with vinyl edgeA
W veneer top with veneer edgeA
Step 6. Grommets
For 30" deep x 60" wide (87V), 30" deep x 72" wide (88V), 36" deep x
60" wide (49V), 36" deep x 72" wide (43V), 36" deep x 84" wide (44V),
36" deep x 96" wide (89V), 42" deep x 66" wide (50V), 42" deep x 72"
wide (51V), 42" deep x 78" wide (52V), 42" deep x 84" wide (53V), 48"
deep x 84" wide (54V), 48" deep x 96" wide (47V), 54" deep x 90" wide
(55V), 54" deep x 96" wide (56V), or 54" deep x 108" wide (57V)
NG no grommetA
C2 2 round cutouts, over columnsA
CR single centered oval cutoutA
CA 2 round cutouts and center oval cutoutA
Eam
es®
Tabl
es=
==
114 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 114
For 54" deep x 120" wide (58V), 54" deep x 144" wide (60V), 54" deep x
156" wide (61V), 54" deep x 168" wide (62V), 60" deep x 120" wide
(71V), 60" deep x 144" wide (72V), 60" deep x 156" wide (73V), or 60"
deep x 168" wide (74V)
NG no grommetA
C2 2 round cutouts, over columnsA
CM 2 oval cutoutsA
CB 2 round cutouts and 2 oval cutoutsA
For 54" deep x 192" wide (64V) or 60" deep x 192" wide (75V)
NG no grommetA
C2 2 round cutouts, over columnsA
CP 3 oval cutoutsA
CE 2 round cutouts and 3 oval cutoutsA
For 54" deep x 216" wide (66V), 54" deep x 240" wide (68V), 54" deep x
264" wide (70V), 60" deep x 216" wide (76V), 60" deep x 240" wide
(77V), or 60" deep x 264" wide (78V)
NG no grommetA
C3 3 round cutouts, over columnsA
CN 4 oval cutoutsA
CD 3 round cutouts and 4 oval cutoutsA
Prices for Steps 1-6.
NG C2 C3 CM CN CP
ET487V S L $1861 2321 — — — —
C $2240 2700 — — — —
W $2400 2860 — — — —
M $3380 3840 — — — —
G $6850 7630 — — — —
CR CA CB CD CE
ET487V S L $2091 2551 — — —
C $2470 2930 — — —
W $2630 3090 — — —
M $3610 4070 — — —
G $7670 8460 — — —
NG C2 C3 CM CN CP
ET488V S L $1982 2442 — — — —
C $2420 2880 — — — —
W $2660 3120 — — — —
M $3400 3860 — — — —
G $7700 8490 — — — —
CR CA CB CD CE
ET488V S L $2212 2672 — — —
C $2650 3110 — — —
W $2890 3350 — — —
M $3630 4090 — — —
G $8520 9310 — — —
NG C2 C3 CM CN CP
ET449V S L $2079 2539 — — — —
C $2470 2930 — — — —
W $2664 3124 — — — —
M $4060 4520 — — — —
G $7700 8490 — — — —
CR CA CB CD CE
ET449V S L $2309 2769 — — —
C $2700 3160 — — —
W $2894 3354 — — —
M $4290 4750 — — —
G $8520 9310 — — —
NG C2 C3 CM CN CP
ET443V S L $2126 2586 — — — —
C $2540 3000 — — — —
W $2770 3230 — — — —
M $4080 4540 — — — —
G $8720 9500 — — — —
CR CA CB CD CE
ET443V S L $2356 2816 — — —
C $2770 3230 — — —
W $3000 3460 — — —
M $4310 4770 — — —
G $9540 10330 — — —
NG C2 C3 CM CN CP
ET444V S L $2214 2674 — — — —
C $2720 3180 — — — —
W $3010 3470 — — — —
M $4110 4570 — — — —
G $9730 10520 — — — —
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 115
Eames® Standing Height Table,Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 115
CR CA CB CD CE
ET444V S L $2444 2904 — — —
C $2950 3410 — — —
W $3240 3700 — — —
M $4340 4800 — — —
G $10560 11340 — — —
NG C2 C3 CM CN CP
ET489V S L $2357 2817 — — — —
C $2880 3340 — — — —
W $3090 3550 — — — —
M $4130 4590 — — — —
G $10820 11610 — — — —
CR CA CB CD CE
ET489V S L $2587 3047 — — —
C $3110 3570 — — —
W $3320 3780 — — —
M $4360 4820 — — —
G $11650 12430 — — —
NG C2 C3 CM CN CP
ET450V S L $2449 2909 — — — —
C $2810 3270 — — — —
W $3140 3600 — — — —
M $4090 4550 — — — —
G $9120 9910 — — — —
CR CA CB CD CE
ET450V S L $2679 3139 — — —
C $3040 3500 — — —
W $3370 3830 — — —
M $4320 4780 — — —
G $9950 10730 — — —
NG C2 C3 CM CN CP
ET451V S L $2517 2977 — — — —
C $2846 3306 — — — —
W $3167 3627 — — — —
M $4100 4560 — — — —
G $9730 10520 — — — —
CR CA CB CD CE
ET451V S L $2747 3207 — — —
C $3076 3536 — — —
W $3397 3857 — — —
M $4330 4790 — — —
G $10560 11340 — — —
NG C2 C3 CM CN CP
ET452V S L $2566 3026 — — — —
C $2969 3429 — — — —
W $3269 3729 — — — —
M $6480 6940 — — — —
G $10350 11130 — — — —
CR CA CB CD CE
ET452V S L $2796 3256 — — —
C $3199 3659 — — —
W $3499 3959 — — —
M $6710 7170 — — —
G $11170 11960 — — —
NG C2 C3 CM CN CP
ET453V S L $2594 3054 — — — —
C $2998 3458 — — — —
W $3304 3764 — — — —
M $6480 6940 — — — —
G $11300 12620 — — — —
CR CA CB CD CE
ET453V S L $2824 3284 — — —
C $3228 3688 — — —
W $3534 3994 — — —
M $6710 7170 — — —
G $12480 13810 — — —
NG C2 C3 CM CN CP
ET454V S L $2894 3354 — — — —
C $3309 3769 — — — —
W $3609 4069 — — — —
M $6500 6960 — — — —
G $12690 14020 — — — —
Eam
es®
Tabl
es=
==
116 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 116
CR CA CB CD CE
ET454V S L $3124 3584 — — —
C $3539 3999 — — —
W $3839 4299 — — —
M $6730 7190 — — —
G $13880 15200 — — —
NG C2 C3 CM CN CP
ET447V S L $2953 3413 — — — —
C $3373 3833 — — — —
W $3723 4183 — — — —
M $6530 6990 — — — —
G $14290 15640 — — — —
CR CA CB CD CE
ET447V S L $3183 3643 — — —
C $3603 4063 — — —
W $3953 4413 — — —
M $6760 7220 — — —
G $15480 16800 — — —
NG C2 C3 CM CN CP
ET455V S L $3465 3925 — — — —
C $3908 4368 — — — —
W $4308 4768 — — — —
M $6530 6990 — — — —
G $14980 16310 — — — —
CR CA CB CD CE
ET455V S L $3695 4155 — — —
C $4138 4598 — — —
W $4538 4998 — — —
M $6760 7220 — — —
G $16240 17500 — — —
NG C2 C3 CM CN CP
ET456V S L $3506 3966 — — — —
C $4028 4488 — — — —
W $4478 4938 — — — —
M $6550 7010 — — — —
G $15880 17210 — — — —
CR CA CB CD CE
ET456V S L $3736 4196 — — —
C $4258 4718 — — —
W $4708 5168 — — —
M $6780 7240 — — —
G $17070 18400 — — —
NG C2 C3 CM CN CP
ET457V S L $4501 4961 — — — —
C $4994 5454 — — — —
W $5519 5979 — — — —
G $17680 19010 — — — —
CR CA CB CD CE
ET457V S L $4731 5191 — — —
C $5224 5684 — — —
W $5749 6209 — — —
G $18870 20200 — — —
NG C2 C3 CM CN CP
ET458V S L $5084 5544 — 5544 — —
C $5674 6134 — 6134 — —
W $6274 6734 — 6734 — —
G $20200 21520 — 21570 — —
CR CA CB CD CE
ET458V S L — — $6004 — —
C — — $6594 — —
W — — $7194 — —
G — —$22900 — —
NG C2 C3 CM CN CP
ET460V S L $5483 5943 — 5943 — —
C $6091 6551 — 6551 — —
W $6791 7251 — 7251 — —
CR CA CB CD CE
ET460V S L — — $6403 — —
C — — $7011 — —
W — — $7711 — —
NG C2 C3 CM CN CP
ET461V S L $5933 6393 — 6393 — —
C $6564 7024 — 7024 — —
W $7339 7799 — 7799 — —
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 117
Eames® Standing Height Table,Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 117
CR CA CB CD CE
ET461V S L — — $6853 — —
C — — $7484 — —
W — — $8259 — —
NG C2 C3 CM CN CP
ET462V S L $6472 6932 — 6932 — —
C $7201 7661 — 7661 — —
W $8051 8511 — 8511 — —
CR CA CB CD CE
ET462V S L — — $7392 — —
C — — $8121 — —
W — — $8971 — —
NG C2 C3 CM CN CP
ET464V S L $7214 7674 — — — 7904
C $8117 8577 — — — 8807
W $9067 9527 — — — 9757
CR CA CB CD CE
ET464V S L — — — — $8364
C — — — — $9267
W — — — — $10217
NG C2 C3 CM CN CP
ET466V S L $8006 — 8696 — 8926 —
C $8940 — 9630 — 9860 —
W $9990 — 10680 — 10910 —
CR CA CB CD CE
ET466V S L — — — $9616 —
C — — — $10550 —
W — — — $11600 —
NG C2 C3 CM CN CP
ET468V S L $8780 — 9470 — 9700 —
C $9752 — 10442 — 10672 —
W $10902 — 11592 — 11822 —
CR CA CB CD CE
ET468V S L — — — $10390 —
C — — — $11362 —
W — — — $12512 —
NG C2 C3 CM CN CP
ET470V S L $9533 — 10223 — 10453 —
C $10685 — 11375 — 11605 —
W $11935 — 12625 — 12855 —
CR CA CB CD CE
ET470V S L — — — $11143 —
C — — — $12295 —
W — — — $13545 —
NG C2 C3 CM CN CP
ET471V S L $9500 9960 — 9960 — —
C $11500 11960 — 11960 — —
W $12200 12660 — 12660 — —
G $25030 26350 — 26400 — —
CR CA CB CD CE
ET471V S L — — $10420 — —
C — — $12420 — —
W — — $13120 — —
G — —$27730 — —
NG C2 C3 CM CN CP
ET472V S L $9899 10359 — 10359 — —
C $12100 12560 — 12560 — —
W $12900 13360 — 13360 — —
CR CA CB CD CE
ET472V S L — — $10819 — —
C — — $13020 — —
W — — $13820 — —
NG C2 C3 CM CN CP
ET473V S L $10199 10659 — 10659 — —
C $12600 13060 — 13060 — —
W $13475 13935 — 13935 — —
CR CA CB CD CE
ET473V S L — — $11119 — —
C — — $13520 — —
W — — $14395 — —
NG C2 C3 CM CN CP
ET474V S L $10599 11059 — 11059 — —
C $13200 13660 — 13660 — —
W $14150 14610 — 14610 — —
Eam
es®
Tabl
es=
==
118 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 118
CR CA CB CD CE
ET474V S L — — $11519 — —
C — — $14120 — —
W — — $15070 — —
NG C2 C3 CM CN CP
ET475V S L $12600 13060 — — — 13290
C $17600 18060 — — — 18290
W $18650 19110 — — — 19340
CR CA CB CD CE
ET475V S L — — — — $13750
C — — — — $18750
W — — — — $19800
NG C2 C3 CM CN CP
ET476V S L $15300 — 15990 — 16220 —
C $21900 — 22590 — 22820 —
W $23050 — 23740 — 23970 —
CR CA CB CD CE
ET476V S L — — — $16910 —
C — — — $23510 —
W — — —$24660 —
NG C2 C3 CM CN CP
ET477V S L $16600 — 17290 — 17520 —
C $23300 — 23990 — 24220 —
W $24550 — 25240 — 25470 —
CR CA CB CD CE
ET477V S L — — — $18210 —
C — — — $24910 —
W — — — $26160 —
NG C2 C3 CM CN CP
ET478V S L $16900 — 17590 — 17820 —
C $24200 — 24890 — 25120 —
W $25550 — 26240 — 26470 —
CR CA CB CD CE
ET478V S L — — — $18510 —
C — — — $25810 —
W — — — $27160 —
NG C2 C3 CM CN CP
ET587V S L $1861 2321 — — — —
C $2240 2700 — — — —
W $2400 2860 — — — —
M $3380 3840 — — — —
G $6850 7630 — — — —
CR CA CB CD CE
ET587V S L $2091 2551 — — —
C $2470 2930 — — —
W $2630 3090 — — —
M $3610 4070 — — —
G $7670 8460 — — —
NG C2 C3 CM CN CP
ET588V S L $1982 2442 — — — —
C $2420 2880 — — — —
W $2660 3120 — — — —
M $3400 3860 — — — —
G $7700 8490 — — — —
CR CA CB CD CE
ET588V S L $2212 2672 — — —
C $2650 3110 — — —
W $2890 3350 — — —
M $3630 4090 — — —
G $8520 9310 — — —
NG C2 C3 CM CN CP
ET549V S L $2079 2539 — — — —
C $2470 2930 — — — —
W $2664 3124 — — — —
M $4060 4520 — — — —
G $7700 8490 — — — —
CR CA CB CD CE
ET549V S L $2309 2769 — — —
C $2700 3160 — — —
W $2894 3354 — — —
M $4290 4750 — — —
G $8520 9310 — — —
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 119
Eames® Standing Height Table,Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 119
NG C2 C3 CM CN CP
ET543V S L $2126 2586 — — — —
C $2540 3000 — — — —
W $2770 3230 — — — —
M $4080 4540 — — — —
G $8720 9500 — — — —
CR CA CB CD CE
ET543V S L $2356 2816 — — —
C $2770 3230 — — —
W $3000 3460 — — —
M $4310 4770 — — —
G $9540 10330 — — —
NG C2 C3 CM CN CP
ET544V S L $2214 2674 — — — —
C $2720 3180 — — — —
W $3010 3470 — — — —
M $4110 4570 — — — —
G $9730 10520 — — — —
CR CA CB CD CE
ET544V S L $2444 2904 — — —
C $2950 3410 — — —
W $3240 3700 — — —
M $4340 4800 — — —
G $10560 11340 — — —
NG C2 C3 CM CN CP
ET589V S L $2357 2817 — — — —
C $2880 3340 — — — —
W $3090 3550 — — — —
M $4130 4590 — — — —
G $10820 11610 — — — —
CR CA CB CD CE
ET589V S L $2587 3047 — — —
C $3110 3570 — — —
W $3320 3780 — — —
M $4360 4820 — — —
G $11650 12430 — — —
NG C2 C3 CM CN CP
ET550V S L $2449 2909 — — — —
C $2810 3270 — — — —
W $3140 3600 — — — —
M $4090 4550 — — — —
G $9120 9910 — — — —
CR CA CB CD CE
ET550V S L $2679 3139 — — —
C $3040 3500 — — —
W $3370 3830 — — —
M $4320 4780 — — —
G $9950 10730 — — —
NG C2 C3 CM CN CP
ET551V S L $2517 2977 — — — —
C $2846 3306 — — — —
W $3167 3627 — — — —
M $4100 4560 — — — —
G $9730 10520 — — — —
CR CA CB CD CE
ET551V S L $2747 3207 — — —
C $3076 3536 — — —
W $3397 3857 — — —
M $4330 4790 — — —
G $10560 11340 — — —
NG C2 C3 CM CN CP
ET552V S L $2566 3026 — — — —
C $2969 3429 — — — —
W $3269 3729 — — — —
M $6480 6940 — — — —
G $10350 11130 — — — —
CR CA CB CD CE
ET552V S L $2796 3256 — — —
C $3199 3659 — — —
W $3499 3959 — — —
M $6710 7170 — — —
G $11170 11960 — — —
Eam
es®
Tabl
es=
==
120 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 120
NG C2 C3 CM CN CP
ET553V S L $2594 3054 — — — —
C $2998 3458 — — — —
W $3304 3764 — — — —
M $6480 6940 — — — —
G $11300 12620 — — — —
CR CA CB CD CE
ET553V S L $2824 3284 — — —
C $3228 3688 — — —
W $3534 3994 — — —
M $6710 7170 — — —
G $12480 13810 — — —
NG C2 C3 CM CN CP
ET554V S L $2894 3354 — — — —
C $3309 3769 — — — —
W $3609 4069 — — — —
M $6500 6960 — — — —
G $12690 14020 — — — —
CR CA CB CD CE
ET554V S L $3124 3584 — — —
C $3539 3999 — — —
W $3839 4299 — — —
M $6730 7190 — — —
G $13880 15200 — — —
NG C2 C3 CM CN CP
ET547V S L $2953 3413 — — — —
C $3373 3833 — — — —
W $3723 4183 — — — —
M $6530 6990 — — — —
G $14290 15640 — — — —
CR CA CB CD CE
ET547V S L $3183 3643 — — —
C $3603 4063 — — —
W $3953 4413 — — —
M $6760 7220 — — —
G $15480 16800 — — —
NG C2 C3 CM CN CP
ET555V S L $3465 3925 — — — —
C $3908 4368 — — — —
W $4308 4768 — — — —
M $6530 6990 — — — —
G $14980 16310 — — — —
CR CA CB CD CE
ET555V S L $3695 4155 — — —
C $4138 4598 — — —
W $4538 4998 — — —
M $6760 7220 — — —
G $16240 17500 — — —
NG C2 C3 CM CN CP
ET556V S L $3506 3966 — — — —
C $4028 4488 — — — —
W $4478 4938 — — — —
M $6550 7010 — — — —
G $15880 17210 — — — —
CR CA CB CD CE
ET556V S L $3736 4196 — — —
C $4258 4718 — — —
W $4708 5168 — — —
M $6780 7240 — — —
G $17070 18400 — — —
NG C2 C3 CM CN CP
ET557V S L $4501 4961 — — — —
C $4994 5454 — — — —
W $5519 5979 — — — —
G $17680 19010 — — — —
CR CA CB CD CE
ET557V S L $4731 5191 — — —
C $5224 5684 — — —
W $5749 6209 — — —
G $18870 20200 — — —
NG C2 C3 CM CN CP
ET558V S L $5084 5544 — 5544 — —
C $5674 6134 — 6134 — —
W $6274 6734 — 6734 — —
G $20200 21520 — 21570 — —
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 121
Eames® Standing Height Table,Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 121
CR CA CB CD CE
ET558V S L — — $6004 — —
C — — $6594 — —
W — — $7194 — —
G — —$22900 — —
NG C2 C3 CM CN CP
ET560V S L $5483 5943 — 5943 — —
C $6091 6551 — 6551 — —
W $6791 7251 — 7251 — —
CR CA CB CD CE
ET560V S L — — $6403 — —
C — — $7011 — —
W — — $7711 — —
NG C2 C3 CM CN CP
ET561V S L $5933 6393 — 6393 — —
C $6564 7024 — 7024 — —
W $7339 7799 — 7799 — —
CR CA CB CD CE
ET561V S L — — $6853 — —
C — — $7484 — —
W — — $8259 — —
NG C2 C3 CM CN CP
ET562V S L $6472 6932 — 6932 — —
C $7201 7661 — 7661 — —
W $8051 8511 — 8511 — —
CR CA CB CD CE
ET562V S L — — $7392 — —
C — — $8121 — —
W — — $8971 — —
NG C2 C3 CM CN CP
ET564V S L $7214 7674 — — — 7904
C $8117 8577 — — — 8807
W $9067 9527 — — — 9757
CR CA CB CD CE
ET564V S L — — — — $8364
C — — — — $9267
W — — — — $10217
NG C2 C3 CM CN CP
ET566V S L $8006 — 8696 — 8926 —
C $8940 — 9630 — 9860 —
W $9990 — 10680 — 10910 —
CR CA CB CD CE
ET566V S L — — — $9616 —
C — — — $10550 —
W — — — $11600 —
NG C2 C3 CM CN CP
ET568V S L $8780 — 9470 — 9700 —
C $9752 — 10442 — 10672 —
W $10902 — 11592 — 11822 —
CR CA CB CD CE
ET568V S L — — — $10390 —
C — — — $11362 —
W — — — $12512 —
NG C2 C3 CM CN CP
ET570V S L $9533 — 10223 — 10453 —
C $10685 — 11375 — 11605 —
W $11935 — 12625 — 12855 —
CR CA CB CD CE
ET570V S L — — — $11143 —
C — — — $12295 —
W — — — $13545 —
NG C2 C3 CM CN CP
ET571V S L $9500 9960 — 9960 — —
C $11500 11960 — 11960 — —
W $12200 12660 — 12660 — —
G $25030 26350 — 26400 — —
CR CA CB CD CE
ET571V S L — — $10420 — —
C — — $12420 — —
W — — $13120 — —
G — —$27730 — —
NG C2 C3 CM CN CP
ET572V S L $9899 10359 — 10359 — —
C $12100 12560 — 12560 — —
W $12900 13360 — 13360 — —
Eam
es®
Tabl
es=
==
122 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 122
CR CA CB CD CE
ET572V S L — — $10819 — —
C — — $13020 — —
W — — $13820 — —
NG C2 C3 CM CN CP
ET573V S L $10199 10659 — 10659 — —
C $12600 13060 — 13060 — —
W $13475 13935 — 13935 — —
CR CA CB CD CE
ET573V S L — — $11119 — —
C — — $13520 — —
W — — $14395 — —
NG C2 C3 CM CN CP
ET574V S L $10599 11059 — 11059 — —
C $13200 13660 — 13660 — —
W $14150 14610 — 14610 — —
CR CA CB CD CE
ET574V S L — — $11519 — —
C — — $14120 — —
W — — $15070 — —
NG C2 C3 CM CN CP
ET575V S L $12600 13060 — — — 13290
C $17600 18060 — — — 18290
W $18650 19110 — — — 19340
CR CA CB CD CE
ET575V S L — — — — $13750
C — — — — $18750
W — — — — $19800
NG C2 C3 CM CN CP
ET576V S L $15300 — 15990 — 16220 —
C $21900 — 22590 — 22820 —
W $23050 — 23740 — 23970 —
CR CA CB CD CE
ET576V S L — — — $16910 —
C — — — $23510 —
W — — —$24660 —
NG C2 C3 CM CN CP
ET577V S L $16600 — 17290 — 17520 —
C $23300 — 23990 — 24220 —
W $24550 — 25240 — 25470 —
CR CA CB CD CE
ET577V S L — — — $18210 —
C — — — $24910 —
W — — — $26160 —
NG C2 C3 CM CN CP
ET578V S L $16900 — 17590 — 17820 —
C $24200 — 24890 — 25120 —
W $25550 — 26240 — 26470 —
CR CA CB CD CE
ET578V S L — — — $18510 —
C — — — $25810 —
W — — — $27160 —
Step 7.
Top Finish: Finish
For back-painted glass top (G)
8Q folkstone greyA +$0
91 whiteA +$0
BK blackA +$0
WN warm grey neutralA +$0
Top Finish: Finish
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 123
Eames® Standing Height Table,Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 123
Top Finish: Solid-Color Laminate
For laminate top with vinyl edge (L)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BKM black matteA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
HT inner toneA +$0
LT light toneA +$0
LU soft whiteA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Top Finish: Recut Veneer
For veneer top with vinyl edge (C)
87V 88V 49V 43V 44V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
89V 50V 51V 52V 53V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
54V 47V 55V 56V 57V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
58V 60V 61V 62V 64V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
66V 68V 70V 71V 72V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
73V 74V 75V 76V 77V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
78V
RA light ashA +$0
RK mahogany darkA +$0
RM mahoganyA +$0
Top Finish: Wood Veneer
For veneer top with vinyl edge (C)
87V 88V 49V 43V 44V
2U +$250 265 265 290 305light brown
walnutA
40 +$250 265 265 290 305dark brown
walnutA
9N +$950 1009 1009 1104 1161santos palisanderA
A2 white ashA +$250 265 265 290 305
ED aged cherryA +$250 265 265 290 305
EK +$250 265 265 290 305medium red
walnutA
EN ebonyA +$250 265 265 290 305
OU walnutA +$250 265 265 290 305
UL natural mapleA +$250 265 265 290 305
UX +$250 265 265 290 305walnut on cherryA
V2 beechA +$190 205 205 215 225
89V 50V 51V 52V 53V
2U +$330 290 305 330 330light brown
walnutA
40 +$330 290 305 330 330dark brown
walnutA
9N +$1420 1160 1220 1320 1320santos palisanderA
A2 white ashA +$330 290 305 330 330
ED aged cherryA +$330 290 305 330 330
EK +$330 290 305 330 330medium red
walnutA
EN ebonyA +$330 290 305 330 330
OU walnutA +$330 290 305 330 330
UL natural mapleA +$330 290 305 330 330
UX +$330 290 305 330 330walnut on cherryA
V2 beechA +$245 215 225 245 245
54V 47V 55V 56V 57V
2U +$385 385 425 440 500light brown
walnutA
40 +$385 385 425 440 500dark brown
walnutA
9N +$1656 1656 1700 1760 2350santos palisanderA
A2 white ashA +$385 385 425 440 500
ED aged cherryA +$385 385 425 440 500
EK +$385 385 425 440 500medium red
walnutA
EN ebonyA +$385 385 425 440 500
OU walnutA +$385 385 425 440 500
UL natural mapleA +$385 385 425 440 500
UX +$385 385 425 440 500walnut on cherryA
V2 beechA +$280 280 290 315 345
Eam
es®
Tabl
es=
==
124 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 124
58V 60V 61V 62V 64V
2U +$540 585 635 690 755light brown
walnutA
40 +$540 585 635 690 755dark brown
walnutA
9N +$2538 2750 3175 3450 3775santos palisanderA
A2 white ashA +$540 585 635 690 755
ED aged cherryA +$540 585 635 690 755
EK +$540 585 635 690 755medium red
walnutA
EN ebonyA +$540 585 635 690 755
OU walnutA +$540 585 635 690 755
UL natural mapleA +$540 585 635 690 755
UX +$540 585 635 690 755walnut on cherryA
V2 beechA +$375 410 445 480 520
66V 68V 70V 71V 72V
2U +$815 880 950 680 740light brown
walnutA
40 +$815 880 950 680 740dark brown
walnutA
9N +$4075 4400 5320 3180 3440santos palisanderA
A2 white ashA +$815 880 950 680 740
ED aged cherryA +$815 880 950 680 740
EK +$815 880 950 680 740medium red
walnutA
EN ebonyA +$815 880 950 680 740
OU walnutA +$815 880 950 680 740
UL natural mapleA +$815 880 950 680 740
UX +$815 880 950 680 740walnut on cherryA
V2 beechA +$560 600 650 470 520
73V 74V 75V 76V 77V
2U +$800 870 950 1020 1100light brown
walnutA
40 +$800 870 950 1020 1100dark brown
walnutA
9N +$3970 4320 4720 5100 5500santos palisanderA
A2 white ashA +$800 870 950 1020 1100
ED aged cherryA +$800 870 950 1020 1100
EK +$800 870 950 1020 1100medium red
walnutA
EN ebonyA +$800 870 950 1020 1100
OU walnutA +$800 870 950 1020 1100
UL natural mapleA +$800 870 950 1020 1100
UX +$800 870 950 1020 1100walnut on cherryA
V2 beechA +$560 600 650 700 750
78V
2U light brown walnutA +$1190
40 dark brown walnutA +$1190
9N santos palisanderA +$6650
A2 white ashA +$1190
ED aged cherryA +$1190
EK medium red walnutA +$1190
EN ebonyA +$1190
OU walnutA +$1190
UL natural mapleA +$1190
UX walnut on cherryA +$1190
V2 beechA +$820
For veneer top with veneer edge (W)
87V 88V 49V 43V 44V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
89V 50V 51V 52V 53V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
54V 47V 55V 56V 57V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
58V 60V 61V 62V 64V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
66V 68V 70V 71V 72V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
73V 74V 75V 76V 77V
RA light ashA +$0 0 0 0 0
RK mahogany darkA +$0 0 0 0 0
RM mahoganyA +$0 0 0 0 0
78V
RA light ashA +$0
RK mahogany darkA +$0
RM mahoganyA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 125
Eames® Standing Height Table,Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 125
For veneer top with veneer edge (W)
87V 88V 49V 43V 44V
V2 beechA +$190 205 205 215 225
2U +$250 265 265 290 305light brown
walnutA
A2 white ashA +$250 265 265 290 305
40 +$250 265 265 290 305dark brown
walnutA
ED aged cherryA +$250 265 265 290 305
EK +$250 265 265 290 305medium red
walnutA
EN ebonyA +$250 265 265 290 305
OU walnutA +$250 265 265 290 305
UL natural mapleA +$250 265 265 290 305
UX +$250 265 265 290 305walnut on cherryA
9N +$950 1009 1009 1104 1161santos palisanderA
89V 50V 51V 52V 53V
V2 beechA +$245 215 225 245 245
2U +$330 290 305 330 330light brown
walnutA
A2 white ashA +$330 290 305 330 330
40 +$330 290 305 330 330dark brown
walnutA
ED aged cherryA +$330 290 305 330 330
EK +$330 290 305 330 330medium red
walnutA
EN ebonyA +$330 290 305 330 330
OU walnutA +$330 290 305 330 330
UL natural mapleA +$330 290 305 330 330
UX +$330 290 305 330 330walnut on cherryA
9N +$1420 1160 1220 1320 1320santos palisanderA
54V 47V 55V 56V 57V
V2 beechA +$280 280 290 315 345
2U +$385 385 425 440 500light brown
walnutA
A2 white ashA +$385 385 425 440 500
40 +$385 385 425 440 500dark brown
walnutA
ED aged cherryA +$385 385 425 440 500
EK +$385 385 425 440 500medium red
walnutA
EN ebonyA +$385 385 425 440 500
OU walnutA +$385 385 425 440 500
UL natural mapleA +$385 385 425 440 500
UX +$385 385 425 440 500walnut on cherryA
9N +$1656 1656 1700 1760 2350santos palisanderA
58V 60V 61V 62V 64V
V2 beechA +$375 410 445 480 520
2U +$540 585 635 690 755light brown
walnutA
A2 white ashA +$540 585 635 690 755
40 +$540 585 635 690 755dark brown
walnutA
ED aged cherryA +$540 585 635 690 755
EK +$540 585 635 690 755medium red
walnutA
EN ebonyA +$540 585 635 690 755
OU walnutA +$540 585 635 690 755
UL natural mapleA +$540 585 635 690 755
UX +$540 585 635 690 755walnut on cherryA
9N +$2538 2750 3175 3450 3775santos palisanderA
Eam
es®
Tabl
es=
==
126 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 126
66V 68V 70V 71V 72V
V2 beechA +$560 600 650 470 520
2U +$815 880 950 680 740light brown
walnutA
A2 white ashA +$815 880 950 680 740
40 +$815 880 950 680 740dark brown
walnutA
ED aged cherryA +$815 880 950 680 740
EK +$815 880 950 680 740medium red
walnutA
EN ebonyA +$815 880 950 680 740
OU walnutA +$815 880 950 680 740
UL natural mapleA +$815 880 950 680 740
UX +$815 880 950 680 740walnut on cherryA
9N +$4075 4400 5320 3180 3440santos palisanderA
73V 74V 75V 76V 77V
V2 beechA +$560 600 650 700 750
2U +$800 870 950 1020 1100light brown
walnutA
A2 white ashA +$800 870 950 1020 1100
40 +$800 870 950 1020 1100dark brown
walnutA
ED aged cherryA +$800 870 950 1020 1100
EK +$800 870 950 1020 1100medium red
walnutA
EN ebonyA +$800 870 950 1020 1100
OU walnutA +$800 870 950 1020 1100
UL natural mapleA +$800 870 950 1020 1100
UX +$800 870 950 1020 1100walnut on cherryA
9N +$3970 4320 4720 5100 5500santos palisanderA
78V
V2 beechA +$820
2U light brown walnutA +$1190
A2 white ashA +$1190
40 dark brown walnutA +$1190
ED aged cherryA +$1190
EK medium red walnutA +$1190
EN ebonyA +$1190
OU walnutA +$1190
UL natural mapleA +$1190
UX walnut on cherryA +$1190
9N santos palisanderA +$6650
Step 8. Edge Finish
For laminate top with vinyl edge (L) or veneer top with vinyl edge (C)
8Q folkstone greyA +$0
91 whiteA +$0
98 studio whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WL sandstoneA +$0
WN warm grey neutralA +$0
Step 9. Grommet Finish
For 2 round cutouts, over columns (C2) or 3 round cutouts, over
columns (C3)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
For single centered oval cutout (CR) or 2 round cutouts and center oval
cutout (CA)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$150
For 2 oval cutouts (CM) or 2 round cutouts and 2 oval cutouts (CB)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$300
For 3 oval cutouts (CP) or 2 round cutouts and 3 oval cutouts (CE)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$450
For 4 oval cutouts (CN) or 3 round cutouts and 4 oval cutouts (CD)
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
PA polished aluminumA +$600
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 127
Eames® Standing Height Table,Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 127
Step 10. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Step 11. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Eam
es®
Tabl
es=
==
128 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 128
Eames® Standing Height Table,Round, Stone
Product Information
Description
This table has a stone top and comes with adjustable glides. Ships
knocked down with assembly required. Top and base components ship
in separate packages.
Notes
Stone top is 3/4" thick and has a full bullnose edge profile.
Marble tops have a honed finish; quartz tops have a polished finish.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET407!ET408!ET409!ET410!ET507!ET508!ET509!ET510!
HermanMiller Eames® Tables Price Book (2/18) 129
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 129
Specification Information
Step 1.
ETA
Step 2. Height
4 36" highA
5 42" highA
Step 3. Diameter
07 30" diameterA
08 36" diameterA
09 42" diameterA
10 48" diameterA
Step 4. Base
For 30" diameter (07) or 36" diameter (08)
U universal baseA
C contract baseA
For 42" diameter (09) or 48" diameter (10)
C contract baseA
Step 5. Surface Material
S stone topA
Prices for Steps 1-5.
S
ET407 U $4222
C $4222
ET408 U $5073
C $5073
ET409 C $7340
ET410 C $7599
ET507 U $4222
C $4222
ET508 U $5073
C $5073
ET509 C $7340
ET510 C $7599
Step 6. Top Finish
07S 08S 09S 10S
5U georgia grey marbleA +$436 526 610 711
CRR Carrara marbleA +$436 0 -1000 -1000
HR wisconsin black marbleA +$1212 1462 1590 1723
QBL black quartzA +$270 -300 -1200 -1200
QCN concrete quartzA -$250 -900 -1800 -1800
QPL pearl quartzA -$250 -900 -1800 -1800
Step 7. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Step 8. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Eam
es®
Tabl
es=
==
130 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Round, Stone continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 130
Eames® Standing Height Table,Square, Stone
Product Information
Description
This table has a stone top and comes with adjustable glides. Ships
knocked down with assembly required. Top and base components ship
in separate packages.
Notes
Stone top is 3/4" thick and has a full bullnose edge profile.
Marble tops have a honed finish; quartz tops have a polished finish.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET404!ET406!ET504!ET506!
HermanMiller Eames® Tables Price Book (2/18) 131
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 131
Specification Information
Step 1.
ETA
Step 2. Height
4 36" highA
5 42" highA
Step 3. Depth/Width
04 30" deep x 30" wideA
06 42" deep x 42" wideA
Step 4. Base
For 30" deep x 30" wide (04)
U universal baseA
C contract baseA
For 42" deep x 42" wide (06)
C contract baseA
Step 5. Surface Material
S stone topA
Prices for Steps 1-5.
S
ET404 U $4222
C $4222
ET406 C $7340
ET504 U $4222
C $4222
ET506 C $7340
Step 6. Top Finish
04S 06S
5U georgia grey marbleA +$436 610
CRR Carrara marbleA +$436 -1000
HR wisconsin black marbleA +$1212 1590
QBL black quartzA +$270 -1200
QCN concrete quartzA -$250 -1800
QPL pearl quartzA -$250 -1800
Step 7. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Step 8. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Eam
es®
Tabl
es=
==
132 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Square, Stone continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 132
Eames® Standing Height Table,Rectangular, Stone
Product Information
Description
This table has a stone top and comes with adjustable glides. Ships
knocked down with assembly required. Top and base components ship
in separate packages.
Notes
Stone top is 3/4" thick and has a full bullnose edge profile.
Marble tops have a honed finish; quartz tops have a polished finish.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET443!ET450!ET452!ET487!ET543!ET550!ET552!ET587!
HermanMiller Eames® Tables Price Book (2/18) 133
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 133
Specification Information
Step 1.
ETA
Step 2. Height
4 36" highA
5 42" highA
Step 3. Depth/Width
87R 30" deep x 60" wideA
43R 36" deep x 72" wideA
50R 42" deep x 66" wideA
52R 42" deep x 78" wideA
Step 4. Base
S segmented baseA
Step 5. Surface Material
S stone topA
Prices for Steps 1-5.
S
ET487R S $9896
ET443R S $11044
ET450R S $10758
ET452R S $11322
ET587R S $9896
ET543R S $11044
ET550R S $10758
ET552R S $11322
Step 6. Top Finish
87RS 43RS 50RS 52RS
5U georgia grey marbleA +$1026 1148 0 0
CRR Carrara marbleA -$500 -500 -500 -800
HR wisconsin black marbleA +$2808 3141 3500 3500
QBL black quartzA -$1400 -1200 -1400 -1400
QCN concrete quartzA -$2200 -3000 -3000 -3000
QPL pearl quartzA -$2200 -3000 -3000 -3000
Step 7. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Step 8. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Eam
es®
Tabl
es=
==
134 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Rectangular, Stone continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 134
Eames® Standing Height Table,Oval, Stone
Product Information
Description
This table has a stone top and comes with adjustable glides. Ships
knocked down with assembly required. Top and base components ship
in separate packages.
Notes
Stone top is 3/4" thick and has a full bullnose edge profile.
Marble tops have a honed finish; quartz tops have a polished finish.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET443!ET450!ET452!ET487!ET543!ET550!ET552!ET587!
HermanMiller Eames® Tables Price Book (2/18) 135
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 135
Specification Information
Step 1.
ETA
Step 2. Height
4 36" highA
5 42" highA
Step 3. Depth/Width
87V 30" deep x 60" wideA
43V 36" deep x 72" wideA
50V 42" deep x 66" wideA
52V 42" deep x 78" wideA
Step 4. Base
S segmented baseA
Step 5. Surface Material
S stone topA
Prices for Steps 1-5.
S
ET487V S $9896
ET443V S $11044
ET450V S $10758
ET452V S $11322
ET587V S $9896
ET543V S $11044
ET550V S $10758
ET552V S $11322
Step 6. Top Finish
87VS 43VS 50VS 52VS
5U georgia grey marbleA +$700 0 1117 1177
CRR Carrara marbleA +$450 -300 500 500
HR wisconsin black marbleA +$2215 3050 3058 3221
QBL black quartzA -$400 -350 -500 -500
QCN concrete quartzA -$1200 -2000 -2000 -2000
QPL pearl quartzA -$1200 -2000 -2000 -2000
Step 7. Column Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Step 8. Base Finish
91 whiteA +$0
BK blackA +$0
BU black umberA +$0
CL cool grey neutralA +$0
G2 graphite satinA +$0
HF inner tone lightA +$0
LT light toneA +$0
LU soft whiteA +$0
MT medium toneA +$0
PA polished aluminumA +$0
SG slate greyA +$0
WN warm grey neutralA +$0
CN metallic champagneA +$0
EH metallic bronzeA +$0
MS metallic silverA +$0
Eam
es®
Tabl
es=
==
136 Eames® Tables Price Book (2/18) HermanMiller
Eames® Standing Height Table,Oval, Stone continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 136
Round Dual USB Charging Unit
Product Information
Description
This round dual USB charging unit works with small Eames® tables (30"
or 36" round or square tops) with a universal or contract base. Unit is
powered using a standard power cord with plug end.
Notes
Unit provides 2 amps per port.
Can be used with Eames round or square tables (30", 36") in occasional,
collaborative lounge, conference, or standing heights, ordered
separately.
Dimensions
Specification Information
Step 1.
ET990.A
Step 2. Cord Length
02 2' cordA
04 4' cordA
10 10' cordA
20 20' cordA
Prices for Steps 1-2.
ET990. 02 $400
04 $400
10 $425
20 $455
Step 3. Finish
91 white bezel, white faceplateA +$0
BK black bezel, black faceplateA +$0
PA91 polished aluminum bezel, white faceplateA +$150
PABK polished aluminum bezel, black faceplateA +$150
ET990.
HermanMiller Eames® Tables Price Book (2/18) 137
==
= Eam
es® Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 137
Round Power Module
Product Information
Description
This power module offers a range of power, data and USB configurations
for use on large Eames® tables with contract or segmented bases. This
unit may be used in place of any of the round grommets over the
column(s) of Eames contract or segmented base tables with tops larger
than 36". Power module is UL listed and available with 15-amp cord or
an open end for hard-wiring.
Notes
Field cutting of grommet cutouts is possible; factory cutouts are
recommended.
This unit will not work on 30" or 36" round or square Eames tables with
universal or contract bases.
Dimensions
ET991.
138 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Tabl
es=
==
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 138
Specification Information
Step 1.
ET991.A
Step 2. Configuration
A 2 simplex receptaclesA
B 1 simplex receptacle, 1 dual USBA
C 1 simplex receptacle, 1 open data portA
Step 3. Power Type
A power cord with plug endA
B conduit with open end, for hard-wiringA
Step 4. Cord/Conduit Length
For power cord with plug end (A)
02 2' cordA
04 4' cordA
10 10' cordA
20 20' cordA
For conduit with open end, for hard-wiring (B)
02 2' conduitA
04 4' conduitA
10 10' conduitA
20 20' conduitA
Prices for Steps 1-4.
02 04 10 20
ET991. A A $255 255 280 310
B $260 290 385 535
B A $410 410 435 465
B $420 450 545 695
C A $255 255 280 310
B $260 290 385 535
Step 5. Finish
91 white faceplate, white simplexA +$0
BK black faceplate, black simplexA +$0
PA91 polished aluminum faceplate, white simplexA +$0
PABK polished aluminum faceplate, black simplexA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 139
Round Power Module continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 139
Oval Power Module
Product Information
Description
This power module works on rectangular and oval Eames® tables with
segmented base. It comes in 2 basic configurations of simplex
receptacles or simplex receptacles and dual USB charging ports. Unit is
powered using a standard power cord with plug end or a hard-wired
connection with electrical conduit. This product is UL listed.
Notes
Eames oval or rectangular tables 10'L-14'L may utilize any of the
following power solutions if proper cutouts are selected as part of the
table specification:
• 2 individual oval power modules (ET992.)
• 2 individual oval power modules with undermount power (ET994.)
• 1 pair of oval power modules (ET993.)
• 1 pair of oval power modules with undermount power (ET995.)
• Up to 2 round power modules (ET991.)
Eames oval or rectangular tables 16'L may utilize any of the following
power solutions if proper cutouts are selected as part of the table
specification:
• 3 individual oval power modules (ET992.)
• 2 individual oval power modules with undermount power (ET994.) in
conjunction with 1 additional oval power module (ET992.) in the center
• 1 pair of oval power modules (ET993.) with 1 additional oval power
module (ET992.) at one end
• 1 pair of oval power modules with undermount power (ET995.) in
conjunction with 1 additional oval power module (ET992.)
• Up to 2 round power modules (ET991.)
Eames oval or rectangular tables 18'L and larger may utilize any of the
following power solutions if proper cutouts are selected as part of the
table specification:
• 2 pair of oval power modules (ET993.)
• 2 pair of oval power modules with undermount power (ET995.)
• 2 individual oval power modules with undermount power (ET994.) for
each end of the table, in conjunction with 2 additional oval power
modules (ET992.) in the center
• 4 individual oval power modules (ET992.)
• Up to 3 round power modules (ET991.)
Field cutting of grommet cutouts is possible; factory cutouts are
recommended.
Dimensions
ET992.
140 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Tabl
es=
==
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 140
Specification Information
Step 1.
ET992.A
Step 2. Configuration
A 4 simplex receptaclesA
B 3 simplex receptacles, 1 dual USBA
Step 3. Power Type
A power cord with plug endA
B conduit with open end, for hard-wiringA
Step 4. Cord/Conduit Length
For power cord with plug end (A)
04 4' cordA
06 6' cordA
10 10' cordA
20 20' cordA
For conduit with open end, for hard-wiring (B)
04 4' conduitA
06 6' conduitA
10 10' conduitA
20 20' conduitA
Prices for Steps 1-4.
04 06 10 20
ET992. A A $720 720 745 775
B $780 830 870 1020
B A $750 750 775 805
B $810 860 900 1050
Step 5. Bezel Finish
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
Step 6. Faceplate Finish
91 whiteA +$0
BK blackA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 141
Oval Power Module continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 141
Pair of Oval Power Modules
Product Information
Description
This pair of oval power modules works on rectangular and oval Eames®
tables with segmented base. Each module comes in 2 basic
configurations of simplex receptacles or simplex receptacles and dual
USB charging ports. Unit is powered using a standard power cord with
plug. This product is UL listed.
Notes
Eames oval or rectangular tables 10'L-14'L may utilize any of the
following power solutions if proper cutouts are selected as part of the
table specification:
• 2 individual oval power modules (ET992.)
• 2 individual oval power modules with undermount power (ET994.)
• 1 pair of oval power modules (ET993.)
• 1 pair of oval power modules with undermount power (ET995.)
• Up to 2 round power modules (ET991.)
Eames oval or rectangular tables 16'L may utilize any of the following
power solutions if proper cutouts are selected as part of the table
specification:
• 3 individual oval power modules (ET992.)
• 2 individual oval power modules with undermount power (ET994.) in
conjunction with 1 additional oval power module (ET992.) in the center
• 1 pair of oval power modules (ET993.) with 1 additional oval power
module (ET992.) at one end
• 1 pair of oval power modules with undermount power (ET995.) in
conjunction with 1 additional oval power module (ET992.)
• Up to 2 round power modules (ET991.)
Eames oval or rectangular tables 18'L and larger may utilize any of the
following power solutions if proper cutouts are selected as part of the
table specification:
• 2 pair of oval power modules (ET993.)
• 2 pair of oval power modules with undermount power (ET995.)
• 2 individual oval power modules with undermount power (ET994.) for
each end of the table, in conjunction with 2 additional oval power
modules (ET992.) in the center
• 4 individual oval power modules (ET992.)
• Up to 3 round power modules (ET991.)
Field cutting of grommet cutouts is possible; factory cutouts are
recommended.
Dimensions
ET993.
142 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Tabl
es=
==
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 142
Specification Information
Step 1.
ET993.A
Step 2. Configuration (in each unit)
A 4 simplex receptacles per distributorA
B 3 simplex receptacles, 1 dual USB per distributorA
Step 3. Cord Length
04 4' cordA
10 10' cordA
16 16' cordA
Prices for Steps 1-3.
04 10 16
ET993. A $1850 1875 1905
B $1920 1945 1975
Step 4. Bezel Finish
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
Step 5. Faceplate Finish
91 whiteA +$0
BK blackA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 143
Pair of Oval Power Modules continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 143
Oval Power Module &Undermount Power
Product Information
Description
This oval power module with undermount unit works on rectangular and
oval Eames® tables with segmented base. Oval power module comes in
2 basic configurations of simplex receptacles or simplex receptacles and
dual USB charging ports. The undermount unit provides a choice of
power, USB, or data port combinations. Module and unit are UL listed
and powered using a standard power cord with plug.
Notes
Undermount power unit is always black.
Eames oval or rectangular tables 10'L-14'L may utilize any of the
following power solutions if proper cutouts are selected as part of the
table specification:
• 2 individual oval power modules (ET992.)
• 2 individual oval power modules with undermount power (ET994.)
• 1 pair of oval power modules (ET993.)
• 1 pair of oval power modules with undermount power (ET995.)
• Up to 2 round power modules (ET991.)
Eames oval or rectangular tables 16'L may utilize any of the following
power solutions if proper cutouts are selected as part of the table
specification:
• 3 individual oval power modules (ET992.)
• 2 individual oval power modules with undermount power (ET994.) in
conjunction with 1 additional oval power module (ET992.) in the center
• 1 pair of oval power modules (ET993.) with 1 additional oval power
module (ET992.) at one end
• 1 pair of oval power modules with undermount power (ET995.) in
conjunction with 1 additional oval power module (ET992.)
• Up to 2 round power modules (ET991.)
Eames oval or rectangular tables 18'L and larger may utilize any of the
following power solutions if proper cutouts are selected as part of the
table specification:
• 2 pair of oval power modules (ET993.)
• 2 pair of oval power modules with undermount power (ET995.)
• 2 individual oval power modules with undermount power (ET994.) for
each end of the table, in conjunction with 2 additional oval power
modules (ET992.) in the center
• 4 individual oval power modules (ET992.)
• Up to 3 round power modules (ET991.)
Field cutting of grommet cutouts is possible; factory cutouts are
recommended.
Dimensions
ET994.
144 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Tabl
es=
==
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 144
Specification Information
Step 1.
ET994.A
Step 2. Oval Power Module Configuration
A 4 simplex receptaclesA
B 3 simplex receptacles, 1 dual USBA
Step 3. Undermount Unit Configuration
A 2 simplex receptaclesA
B 1 simplex receptacle, 1 dual USBA
C 1 simplex receptacle, 1 open data portA
Step 4. Cord Length
04 4' cordA
10 10' cordA
17 17' cordA
Prices for Steps 1-4.
04 10 17
ET994. A A $1320 1345 1375
B $1540 1565 1595
C $1320 1345 1375
B A $1350 1375 1405
B $1570 1595 1625
C $1360 1385 1415
Step 5. Bezel Finish
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
Step 6. Faceplate Finish
91 whiteA +$0
BK blackA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 145
Oval Power Module &Undermount Power continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 145
Pair of Oval Power Module &Undermount Power
Product Information
Description
This set of power modules with undermount unit works on rectangular
and oval Eames® tables with segmented base. Oval power modules
come in 2 basic configurations of simplex receptacles or simplex
receptacles and dual USB charging ports. The undermount unit provides
a choice of power, USB, or data port combinations. Module and unit are
UL listed and powered using a standard power cord with plug.
Notes
Undermount power unit is always black.
Eames oval or rectangular tables 10'L-14'L may utilize any of the
following power solutions if proper cutouts are selected as part of the
table specification:
• 2 individual oval power modules (ET992.)
• 2 individual oval power modules with undermount power (ET994.)
• 1 pair of oval power modules (ET993.)
• 1 pair of oval power modules with undermount power (ET995.)
• Up to 2 round power modules (ET991.)
Eames oval or rectangular tables 16'L may utilize any of the following
power solutions if proper cutouts are selected as part of the table
specification:
• 3 individual oval power modules (ET992.)
• 2 individual oval power modules with undermount power (ET994.) in
conjunction with 1 additional oval power module (ET992.) in the center
• 1 pair of oval power modules (ET993.) with 1 additional oval power
module (ET992.) at one end
• 1 pair of oval power modules with undermount power (ET995.) in
conjunction with 1 additional oval power module (ET992.)
• Up to 2 round power modules (ET991.)
Eames oval or rectangular tables 18'L and larger may utilize any of the
following power solutions if proper cutouts are selected as part of the
table specification:
• 2 pair of oval power modules (ET993.)
• 2 pair of oval power modules with undermount power (ET995.)
• 2 individual oval power modules with undermount power (ET994.) for
each end of the table, in conjunction with 2 additional oval power
modules (ET992.) in the center
• 4 individual oval power modules (ET992.)
• Up to 3 round power modules (ET991.)
Field cutting of grommet cutouts is possible; factory cutouts are
recommended.
Dimensions
ET995.
146 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Tabl
es=
==
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 146
Specification Information
Step 1.
ET995.A
Step 2. Oval Power Module Configuration
B 3 simplex receptacles, 1 dual USBA
Step 3. Undermount Unit Configuration
A 2 simplex receptaclesA
B 1 simplex receptacle, 1 dual USBA
C 1 simplex receptacle, 1 open data portA
Step 4. Cord Length
04 4' cordA
10 10' cordA
17 17' cordA
Prices for Steps 1-4.
04 10 17
ET995. B A $1850 1875 1905
B $2080 2105 2135
C $1850 1875 1905
Step 5. Bezel Finish
91 whiteA +$0
BK blackA +$0
PA polished aluminumA +$0
Step 6. Faceplate Finish
91 whiteA +$0
BK blackA +$0
==
= Eam
es® Tables
HermanMiller Eames® Tables Price Book (2/18) 147
Pair of Oval Power Module &Undermount Power continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 147
Eames® Outdoor OccasionalTable, Round
Product Information
Description
This outdoor table has a stone top or a thin-profile HPL top and comes
with adjustable glides. Ships knocked down with assembly required.
Top and base components ship in separate packages.
Notes
Stone top is 3/4" thick and has a honed finish and full bullnose edge
profile.
Thin profile HPL top is 1/2" thick and always has a black edge.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET530!ET531!
148 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Out
door
Tab
les=
==
==
=
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 148
Specification Information
Step 1.
ET5A
Step 2. Height
3 16" highA
Step 3. Diameter
07 30" diameterA
08 36" diameterA
09 42" diameterA
10 48" diameterA
Step 4. Base
For 30" diameter (07) or 36" diameter (08)
C contract baseA
U universal baseA
For 42" diameter (09) or 48" diameter (10)
C contract baseA
Step 5. Surface Material
S stone topA
M thin profile HPL top with black edgeA
Prices for Steps 1-5.
S M
ET5307 C $4122 1283
U $4122 1283
ET5308 C $4973 1653
U $4973 1653
ET5309 C $7240 2571
ET5310 C $7499 2633
Step 6. Top Finish
For stone top (S)
07 08 09 10
5U georgia grey marbleA +$436 526 610 711
HR wisconsin black marbleA +$1212 1462 1590 1723
CRR Carrara marbleA +$436 0 -1000 -1000
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Step 7. Column Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
Step 8. Base Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
==
==
==
Eames® O
utdoor Tables
HermanMiller Eames® Tables Price Book (2/18) 149
Eames® Outdoor OccasionalTable, Round continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 149
Eames® Outdoor OccasionalTable, Square
Product Information
Description
This outdoor table has a stone top or a thin-profile HPL top and comes
with adjustable glides. Ships knocked down with assembly required.
Top and base components ship in separate packages.
Notes
Stone top is 3/4" thick and has a honed finish and full bullnose edge
profile.
Thin profile HPL top is 1/2" thick and always has a black edge.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET530!ET534!
150 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Out
door
Tab
les=
==
==
=
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 150
Specification Information
Step 1.
ET5A
Step 2. Height
3 16" highA
Step 3. Depth/Width
04 30" deep x 30" wideA
05 36" deep x 36" wideA
06 42" deep x 42" wideA
48 48" deep x 48" wideA
Step 4. Base
For 30" deep x 30" wide (04) or 36" deep x 36" wide (05)
U universal baseA
C contract baseA
For 42" deep x 42" wide (06) or 48" deep x 48" wide (48)
C contract baseA
Step 5. Surface Material
For 30" deep x 30" wide (04) or 42" deep x 42" wide (06)
S stone topA
M thin profile HPL top with black edgeA
For 36" deep x 36" wide (05) or 48" deep x 48" wide (48)
M thin profile HPL top with black edgeA
Prices for Steps 1-5.
S M
ET5304 U $4122 1283
C $4122 1283
ET5305 U — $1653
C — $1653
ET5306 C $7240 2571
ET5348 C — $2633
Step 6. Top Finish
For 30" deep x 30" wide (04) with stone top (S)
5U georgia grey marbleA +$436
HR wisconsin black marbleA +$1212
CRR Carrara marbleA +$436
For 42" deep x 42" wide (06) with stone top (S)
5U georgia grey marbleA +$610
HR wisconsin black marbleA +$1590
CRR Carrara marbleA -$1000
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Step 7. Column Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
Step 8. Base Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
==
==
==
Eames® O
utdoor Tables
HermanMiller Eames® Tables Price Book (2/18) 151
Eames® Outdoor OccasionalTable, Square continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 151
Eames® Outdoor Table, LowConference Height, Rectangular
Product Information
Description
This outdoor table has a stone top or a thin-profile HPL top and comes
with adjustable glides. Ships knocked down with assembly required.
Top and base components ship in separate packages.
Notes
Stone top is 3/4" thick and has a honed finish and full bullnose edge
profile.
Thin profile HPL top is 1/2" thick and always has a black edge.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET524!ET525!ET528!
152 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Out
door
Tab
les=
==
==
=
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 152
Specification Information
Step 1.
ET5A
Step 2. Height
2 251/2" highA
Step 3. Depth/Width
87R 30" deep x 60" wideA
43R 36" deep x 72" wideA
50R 42" deep x 66" wideA
52R 42" deep x 78" wideA
Step 4. Base
S segmented baseA
Step 5. Surface Material
S stone topA
M thin profile HPL top with black edgeA
Prices for Steps 1-5.
S M
ET5287R S $9696 2525
ET5243R S $10844 3065
ET5250R S $10558 3073
ET5252R S $11122 4916
Step 6. Top Finish
For stone top (S)
87R 43R 50R 52R
5U georgia grey marbleA +$1026 1148 0 0
HR wisconsin black marbleA +$2808 3141 3500 3500
CRR Carrara marbleA -$500 -500 -500 -800
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Step 7. Column Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
Step 8. Base Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
==
==
==
Eames® O
utdoor Tables
HermanMiller Eames® Tables Price Book (2/18) 153
Eames® Outdoor Table, LowConference Height, Rectangularcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 153
Eames® Outdoor Table, LowConference Height, Oval
Product Information
Description
This outdoor table has a stone top or a thin-profile HPL top and comes
with adjustable glides. Ships knocked down with assembly required.
Top and base components ship in separate packages.
Notes
Stone top is 3/4" thick and has a honed finish and full bullnose edge
profile.
Thin profile HPL top is 1/2" thick and always has a black edge.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET524!ET525!ET528!
154 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Out
door
Tab
les=
==
==
=
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 154
Specification Information
Step 1.
ET5A
Step 2. Height
2 251/2" highA
Step 3. Depth/Width
87V 30" deep x 60" wideA
43V 36" deep x 72" wideA
50V 42" deep x 66" wideA
52V 42" deep x 78" wideA
Step 4. Base
S segmented baseA
Step 5. Surface Material
S stone topA
M thin profile HPL top with black edgeA
Prices for Steps 1-5.
S M
ET5287V S $9696 2525
ET5243V S $10844 3065
ET5250V S $10558 3073
ET5252V S $11122 4916
Step 6. Top Finish
For stone top (S)
87V 43V 50V 52V
5U georgia grey marbleA +$700 0 1117 1177
HR wisconsin black marbleA +$2215 3050 3058 3221
CRR Carrara marbleA +$450 -300 500 500
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Step 7. Column Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
Step 8. Base Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
==
==
==
Eames® O
utdoor Tables
HermanMiller Eames® Tables Price Book (2/18) 155
Eames® Outdoor Table, LowConference Height, Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 155
Eames® Outdoor Table, LowConference Height, Square
Product Information
Description
This outdoor table has a stone top or a thin-profile HPL top and comes
with adjustable glides. Ships knocked down with assembly required.
Top and base components ship in separate packages.
Notes
Stone top is 3/4" thick and has a honed finish and full bullnose edge
profile.
Thin profile HPL top is 1/2" thick and always has a black edge.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET520!ET524!
156 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Out
door
Tab
les=
==
==
=
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 156
Specification Information
Step 1.
ET5A
Step 2. Height
2 251/2" highA
Step 3. Depth/Width
04 30" deep x 30" wideA
05 36" deep x 36" wideA
06 42" deep x 42" wideA
48 48" deep x 48" wideA
Step 4. Base
For 30" deep x 30" wide (04) or 36" deep x 36" wide (05)
U universal baseA
C contract baseA
For 42" deep x 42" wide (06) or 48" deep x 48" wide (48)
C contract baseA
Step 5. Surface Material
For 30" deep x 30" wide (04) or 42" deep x 42" wide (06)
S stone topA
M thin profile HPL top with black edgeA
For 36" deep x 36" wide (05) or 48" deep x 48" wide (48)
M thin profile HPL top with black edgeA
Prices for Steps 1-5.
S M
ET5204 U $4122 1283
C $4122 1283
ET5205 U — $1653
C — $1653
ET5206 C $7240 2571
ET5248 C — $2633
Step 6. Top Finish
For 30" deep x 30" wide (04) with stone top (S)
5U georgia grey marbleA +$436
HR wisconsin black marbleA +$1212
CRR Carrara marbleA +$436
For 42" deep x 42" wide (06) with stone top (S)
5U georgia grey marbleA +$610
HR wisconsin black marbleA +$1590
CRR Carrara marbleA -$1000
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Step 7. Column Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
Step 8. Base Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
==
==
==
Eames® O
utdoor Tables
HermanMiller Eames® Tables Price Book (2/18) 157
Eames® Outdoor Table, LowConference Height, Square continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 157
Eames® Outdoor Table, LowConference Height, Round
Product Information
Description
This outdoor table has a stone top or a thin-profile HPL top and comes
with adjustable glides. Ships knocked down with assembly required.
Top and base components ship in separate packages.
Notes
Stone top is 3/4" thick and has a honed finish and full bullnose edge
profile.
Thin profile HPL top is 1/2" thick and always has a black edge.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET520!ET521!ET522!
158 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Out
door
Tab
les=
==
==
=
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 158
Specification Information
Step 1.
ET5A
Step 2. Height
2 251/2" highA
Step 3. Diameter
07 30" diameterA
08 36" diameterA
09 42" diameterA
10 48" diameterA
24 54" diameterA
25 60" diameterA
Step 4. Base
For 30" diameter (07) or 36" diameter (08)
C contract baseA
U universal baseA
For 42" diameter (09) or 48" diameter (10)
C contract baseA
S segmented baseA
For 54" diameter (24) or 60" diameter (25)
S segmented baseA
Step 5. Surface Material
For 30" diameter (07) or 36" diameter (08)
S stone topA
M thin profile HPL top with black edgeA
For 42" diameter (09) or 48" diameter (10) with contract base (C)
S stone topA
M thin profile HPL top with black edgeA
For 42" diameter (09), 48" diameter (10), 54" diameter (24), or 60"
diameter (25) with segmented base (S)
M thin profile HPL top with black edgeA
Prices for Steps 1-5.
S M
ET5207 C $4122 1283
U $4122 1283
ET5208 C $4973 1653
U $4973 1653
ET5209 C $7240 2571
S — $2571
ET5210 C $7499 2633
S — $2633
ET5224 S — $4531
ET5225 S — $4554
Step 6. Top Finish
For 30" diameter (07) with stone top (S)
5U georgia grey marbleA +$436
HR wisconsin black marbleA +$1212
CRR Carrara marbleA +$436
For 36" diameter (08) with stone top (S)
5U georgia grey marbleA +$526
HR wisconsin black marbleA +$1462
CRR Carrara marbleA +$0
For 42" diameter (09) with stone top (S)
5U georgia grey marbleA +$610
HR wisconsin black marbleA +$1590
CRR Carrara marbleA -$1000
For 48" diameter (10) with stone top (S)
5U georgia grey marbleA +$711
HR wisconsin black marbleA +$1723
CRR Carrara marbleA -$1000
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Step 7. Column Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
==
==
==
Eames® O
utdoor Tables
HermanMiller Eames® Tables Price Book (2/18) 159
Eames® Outdoor Table, LowConference Height, Round continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 159
Step 8. Base Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
Eam
es®
Out
door
Tab
les=
==
==
=
160 Eames® Tables Price Book (2/18) HermanMiller
Eames® Outdoor Table, LowConference Height, Round continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 160
Eames® Outdoor Table, Round
Product Information
Description
This outdoor table has a stone top or a thin-profile HPL top and comes
with adjustable glides. Ships knocked down with assembly required.
Top and base components ship in separate packages.
Notes
Stone top is 3/4" thick and has a honed finish and full bullnose edge
profile.
Thin profile HPL top is 1/2" thick and always has a black edge.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET510!ET511!ET512!
HermanMiller Eames® Tables Price Book (2/18) 161
==
==
==
Eames® O
utdoor Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 161
Specification Information
Step 1.
ET5A
Step 2. Height
1 281/2" highA
Step 3. Diameter
07 30" diameterA
08 36" diameterA
09 42" diameterA
10 48" diameterA
24 54" diameterA
25 60" diameterA
Step 4. Base
For 30" diameter (07) or 36" diameter (08)
C contract baseA
U universal baseA
For 42" diameter (09) or 48" diameter (10)
C contract baseA
S segmented baseA
For 54" diameter (24) or 60" diameter (25)
S segmented baseA
Step 5. Surface Material
For 30" diameter (07) or 36" diameter (08)
S stone topA
M thin profile HPL top with black edgeA
For 42" diameter (09) or 48" diameter (10) with contract base (C)
S stone topA
M thin profile HPL top with black edgeA
For 42" diameter (09), 48" diameter (10), 54" diameter (24), or 60"
diameter (25) with segmented base (S)
M thin profile HPL top with black edgeA
Prices for Steps 1-5.
S M
ET5107 C $4122 1283
U $4122 1283
ET5108 C $4973 1653
U $4973 1653
ET5109 C $7240 2571
S — $2571
ET5110 C $7499 2633
S — $2633
ET5124 S — $4531
ET5125 S — $4554
Step 6. Top Finish
For 30" diameter (07) with stone top (S)
5U georgia grey marbleA +$436
HR wisconsin black marbleA +$1212
CRR Carrara marbleA +$436
For 36" diameter (08) with stone top (S)
5U georgia grey marbleA +$526
HR wisconsin black marbleA +$1462
CRR Carrara marbleA +$0
For 42" diameter (09) with stone top (S)
5U georgia grey marbleA +$610
HR wisconsin black marbleA +$1590
CRR Carrara marbleA -$1000
For 48" diameter (10) with stone top (S)
5U georgia grey marbleA +$711
HR wisconsin black marbleA +$1723
CRR Carrara marbleA -$1000
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Step 7. Column Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
Eam
es®
Out
door
Tab
les=
==
==
=
162 Eames® Tables Price Book (2/18) HermanMiller
Eames® Outdoor Table, Roundcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 162
Step 8. Base Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
==
==
==
Eames® O
utdoor Tables
HermanMiller Eames® Tables Price Book (2/18) 163
Eames® Outdoor Table, Roundcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 163
Eames® Outdoor Table, Square
Product Information
Description
This outdoor table has a stone top or a thin-profile HPL top and comes
with adjustable glides. Ships knocked down with assembly required.
Top and base components ship in separate packages.
Notes
Stone top is 3/4" thick and has a honed finish and full bullnose edge
profile.
Thin profile HPL top is 1/2" thick and always has a black edge.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET510!ET514!
164 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Out
door
Tab
les=
==
==
=
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 164
Specification Information
Step 1.
ET5A
Step 2. Height
1 281/2" highA
Step 3. Depth/Width
04 30" deep x 30" wideA
05 36" deep x 36" wideA
06 42" deep x 42" wideA
48 48" deep x 48" wideA
Step 4. Base
For 30" deep x 30" wide (04) or 36" deep x 36" wide (05)
U universal baseA
C contract baseA
For 42" deep x 42" wide (06) or 48" deep x 48" wide (48)
C contract baseA
Step 5. Surface Material
For 30" deep x 30" wide (04) or 42" deep x 42" wide (06)
S stone topA
M thin profile HPL top with black edgeA
For 36" deep x 36" wide (05) or 48" deep x 48" wide (48)
M thin profile HPL top with black edgeA
Prices for Steps 1-5.
S M
ET5104 U $4122 1283
C $4122 1283
ET5105 U — $1653
C — $1653
ET5106 C $7240 2571
ET5148 C — $2633
Step 6. Top Finish
For 30" deep x 30" wide (04) with stone top (S)
5U georgia grey marbleA +$436
HR wisconsin black marbleA +$1212
CRR Carrara marbleA +$436
For 42" deep x 42" wide (06) with stone top (S)
5U georgia grey marbleA +$610
HR wisconsin black marbleA +$1590
CRR Carrara marbleA -$1000
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Step 7. Column Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
Step 8. Base Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
==
==
==
Eames® O
utdoor Tables
HermanMiller Eames® Tables Price Book (2/18) 165
Eames® Outdoor Table, Squarecontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 165
Eames® Outdoor Table,Rectangular
Product Information
Description
This outdoor table has a stone top or a thin-profile HPL top and comes
with adjustable glides. Ships knocked down with assembly required.
Top and base components ship in separate packages.
Notes
Stone top is 3/4" thick and has a honed finish and full bullnose edge
profile.
Thin profile HPL top is 1/2" thick and always has a black edge.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET514!ET515!ET518!
166 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Out
door
Tab
les=
==
==
=
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 166
Specification Information
Step 1.
ET5A
Step 2. Height
1 281/2" highA
Step 3. Depth/Width
87R 30" deep x 60" wideA
43R 36" deep x 72" wideA
50R 42" deep x 66" wideA
52R 42" deep x 78" wideA
Step 4. Base
S segmented baseA
Step 5. Surface Material
S stone topA
M thin profile HPL top with black edgeA
Prices for Steps 1-5.
S M
ET5187R S $9696 2525
ET5143R S $10844 3065
ET5150R S $10558 3073
ET5152R S $11122 4916
Step 6. Top Finish
For stone top (S)
87R 43R 50R 52R
5U georgia grey marbleA +$1026 1148 0 0
HR wisconsin black marbleA +$2808 3141 3500 3500
CRR Carrara marbleA -$500 -500 -500 -800
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Step 7. Column Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
Step 8. Base Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
==
==
==
Eames® O
utdoor Tables
HermanMiller Eames® Tables Price Book (2/18) 167
Eames® Outdoor Table,Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 167
Eames® Outdoor Table, Oval
Product Information
Description
This outdoor table has a stone top or a thin-profile HPL top and comes
with adjustable glides. Ships knocked down with assembly required.
Top and base components ship in separate packages.
Notes
Stone top is 3/4" thick and has a honed finish and full bullnose edge
profile.
Thin profile HPL top is 1/2" thick and always has a black edge.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET514!ET515!ET518!
168 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Out
door
Tab
les=
==
==
=
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 168
Specification Information
Step 1.
ET5A
Step 2. Height
1 281/2" highA
Step 3. Depth/Width
87V 30" deep x 60" wideA
43V 36" deep x 72" wideA
50V 42" deep x 66" wideA
52V 42" deep x 78" wideA
Step 4. Base
S segmented baseA
Step 5. Surface Material
S stone topA
M thin profile HPL top with black edgeA
Prices for Steps 1-5.
S M
ET5187V S $9696 2525
ET5143V S $10844 3065
ET5150V S $10558 3073
ET5152V S $11122 4916
Step 6. Top Finish
For stone top (S)
87V 43V 50V 52V
5U georgia grey marbleA +$700 0 1117 1177
HR wisconsin black marbleA +$2215 3050 3058 3221
CRR Carrara marbleA +$450 -300 500 500
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Step 7. Column Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
Step 8. Base Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
==
==
==
Eames® O
utdoor Tables
HermanMiller Eames® Tables Price Book (2/18) 169
Eames® Outdoor Table, Ovalcontinued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 169
Eames® Outdoor Table, StandingHeight, Round
Product Information
Description
This outdoor table has a stone top or a thin-profile HPL top and comes
with adjustable glides. Ships knocked down with assembly required.
Top and base components ship in separate packages.
Notes
Stone top is 3/4" thick and has a honed finish and full bullnose edge
profile.
Thin profile HPL top is 1/2" thick and always has a black edge.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET540!ET541!ET542!ET550!ET551!ET552!
170 Eames® Tables Price Book (2/18) HermanMiller
Eam
es®
Out
door
Tab
les=
==
==
=
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 170
Specification Information
Step 1.
ET5A
Step 2. Height
4 36" highA
5 42" highA
Step 3. Diameter
07 30" diameterA
08 36" diameterA
09 42" diameterA
10 48" diameterA
24 54" diameterA
25 60" diameterA
Step 4. Base
For 30" diameter (07) or 36" diameter (08)
C contract baseA
U universal baseA
For 42" diameter (09) or 48" diameter (10)
C contract baseA
S segmented baseA
For 54" diameter (24) or 60" diameter (25)
S segmented baseA
Step 5. Surface Material
For 30" diameter (07) or 36" diameter (08) with contract base (C) or
universal base (U)
S stone topA
M thin profile HPL top with black edgeA
For 42" diameter (09) or 48" diameter (10) with contract base (C)
S stone topA
M thin profile HPL top with black edgeA
For 42" diameter (09), 48" diameter (10), 54" diameter (24), or 60"
diameter (25) with segmented base (S)
M thin profile HPL top with black edgeA
Prices for Steps 1-5.
S M
ET5407 C $4222 1383
U $4222 1383
ET5408 C $5073 1753
U $5073 1753
ET5409 C $7340 2671
S — $2671
ET5410 C $7599 2733
S — $2733
ET5424 S — $4631
ET5425 S — $4654
ET5507 C $4222 1383
U $4222 1383
ET5508 C $5073 1753
U $5073 1753
ET5509 C $7340 2671
S — $2671
ET5510 C $7599 2733
S — $2733
ET5524 S — $4631
ET5525 S — $4654
Step 6. Top Finish
For 30" diameter (07) with stone top (S)
5U georgia grey marbleA +$436
HR wisconsin black marbleA +$1212
CRR Carrara marbleA +$436
For 36" diameter (08) with stone top (S)
5U georgia grey marbleA +$526
HR wisconsin black marbleA +$1462
CRR Carrara marbleA +$0
==
==
==
Eames® O
utdoor Tables
HermanMiller Eames® Tables Price Book (2/18) 171
Eames® Outdoor Table, StandingHeight, Round continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 171
For 42" diameter (09) with stone top (S)
5U georgia grey marbleA +$610
HR wisconsin black marbleA +$1590
CRR Carrara marbleA -$1000
For 48" diameter (10) with stone top (S)
5U georgia grey marbleA +$711
HR wisconsin black marbleA +$1723
CRR Carrara marbleA -$1000
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Step 7. Column Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
Step 8. Base Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
Eam
es®
Out
door
Tab
les=
==
==
=
172 Eames® Tables Price Book (2/18) HermanMiller
Eames® Outdoor Table, StandingHeight, Round continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 172
Eames® Outdoor Table, StandingHeight, Square
Product Information
Description
This outdoor table has a stone top or a thin-profile HPL top and comes
with adjustable glides. Ships knocked down with assembly required.
Top and base components ship in separate packages.
Notes
Stone top is 3/4" thick and has a honed finish and full bullnose edge
profile.
Thin profile HPL top is 1/2" thick and always has a black edge.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET540!ET544!ET550!ET554!
HermanMiller Eames® Tables Price Book (2/18) 173
==
==
==
Eames® O
utdoor Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 173
Specification Information
Step 1.
ET5A
Step 2. Height
4 36" highA
5 42" highA
Step 3. Depth/Width
04 30" deep x 30" wideA
05 36" deep x 36" wideA
06 42" deep x 42" wideA
48 48" deep x 48" wideA
Step 4. Base
For 30" deep x 30" wide (04) or 36" deep x 36" wide (05)
U universal baseA
C contract baseA
For 42" deep x 42" wide (06) or 48" deep x 48" wide (48)
C contract baseA
Step 5. Surface Material
For 30" deep x 30" wide (04) or 42" deep x 42" wide (06)
S stone topA
M thin profile HPL top with black edgeA
For 36" deep x 36" wide (05) or 48" deep x 48" wide (48)
M thin profile HPL top with black edgeA
Prices for Steps 1-5.
S M
ET5404 U $4222 1383
C $4222 1383
ET5405 U — $1753
C — $1753
ET5406 C $7340 2671
ET5448 C — $2733
ET5504 U $4222 1383
C $4222 1383
ET5505 U — $1753
C — $1753
ET5506 C $7340 2671
ET5548 C — $2733
Step 6. Top Finish
For 30" deep x 30" wide (04) with stone top (S)
5U georgia grey marbleA +$436
HR wisconsin black marbleA +$1212
CRR Carrara marbleA +$436
For 42" deep x 42" wide (06) with stone top (S)
5U georgia grey marbleA +$610
HR wisconsin black marbleA +$1590
CRR Carrara marbleA -$1000
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Step 7. Column Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
Step 8. Base Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
Eam
es®
Out
door
Tab
les=
==
==
=
174 Eames® Tables Price Book (2/18) HermanMiller
Eames® Outdoor Table, StandingHeight, Square continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 174
Eames® Outdoor Table, StandingHeight, Rectangular
Product Information
Description
This outdoor table has a stone top or a thin-profile HPL top and comes
with adjustable glides. Ships knocked down with assembly required.
Top and base components ship in separate packages.
Notes
Stone top is 3/4" thick and has a honed finish and full bullnose edge
profile.
Thin profile HPL top is 1/2" thick and always has a black edge.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET544!ET545!ET548!ET554!ET555!ET558!
HermanMiller Eames® Tables Price Book (2/18) 175
==
==
==
Eames® O
utdoor Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 175
Specification Information
Step 1.
ET5A
Step 2. Height
4 36" highA
5 42" highA
Step 3. Depth/Width
87R 30" deep x 60" wideA
43R 36" deep x 72" wideA
50R 42" deep x 66" wideA
52R 42" deep x 78" wideA
Step 4. Base
S segmented baseA
Step 5. Surface Material
S stone topA
M thin profile HPL top with black edgeA
Prices for Steps 1-5.
S M
ET5487R S $9896 2725
ET5443R S $11044 3265
ET5450R S $10758 3273
ET5452R S $11322 5116
ET5587R S $9896 2725
ET5543R S $11044 3265
ET5550R S $10758 3273
ET5552R S $11322 5116
Step 6. Top Finish
For stone top (S)
87R 43R 50R 52R
5U georgia grey marbleA +$1026 1148 0 0
HR wisconsin black marbleA +$2808 3141 3500 3500
CRR Carrara marbleA -$500 -500 -500 -800
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Step 7. Column Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
Step 8. Base Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
Eam
es®
Out
door
Tab
les=
==
==
=
176 Eames® Tables Price Book (2/18) HermanMiller
Eames® Outdoor Table, StandingHeight, Rectangular continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 176
Eames® Outdoor Table, StandingHeight, Oval
Product Information
Description
This outdoor table has a stone top or a thin-profile HPL top and comes
with adjustable glides. Ships knocked down with assembly required.
Top and base components ship in separate packages.
Notes
Stone top is 3/4" thick and has a honed finish and full bullnose edge
profile.
Thin profile HPL top is 1/2" thick and always has a black edge.
Natural characteristics in stone cause variations in hues, veins, crystals,
and distinctive marks. These variations and subtle changes seen as the
stone ages are values associated with natural materials. No two
tabletops are identically the same; variations in both color and veining
are to be expected. Over time the stone may fade in color, staining of
the surface may appear, and surface cracks, if not already visible at time
of purchase, may appear. Small cracks do not affect the structure of the
tabletop.
Dimensions
ET544!ET545!ET548!ET554!ET555!ET558!
HermanMiller Eames® Tables Price Book (2/18) 177
==
==
==
Eames® O
utdoor Tables
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 177
Specification Information
Step 1.
ET5A
Step 2. Height
4 36" highA
5 42" highA
Step 3. Depth/Width
87V 30" deep x 60" wideA
43V 36" deep x 72" wideA
50V 42" deep x 66" wideA
52V 42" deep x 78" wideA
Step 4. Base
S segmented baseA
Step 5. Surface Material
S stone topA
M thin profile HPL top with black edgeA
Prices for Steps 1-5.
S M
ET5487V S $9896 2725
ET5443V S $11044 3265
ET5450V S $10758 3273
ET5452V S $11322 5116
ET5587V S $9896 2725
ET5543V S $11044 3265
ET5550V S $10758 3273
ET5552V S $11322 5116
Step 6. Top Finish
For stone top (S)
87V 43V 50V 52V
5U georgia grey marbleA +$700 0 1117 1177
HR wisconsin black marbleA +$2215 3050 3058 3221
CRR Carrara marbleA +$450 -300 500 500
For thin profile HPL top with black edge (M)
91 whiteA +$0
G1 graphiteA +$0
BK blackA +$0
Step 7. Column Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
Step 8. Base Finish
91 whiteA +$20
BK blackA +$20
G2 graphite satinA +$20
Eam
es®
Out
door
Tab
les=
==
==
=
178 Eames® Tables Price Book (2/18) HermanMiller
Eames® Outdoor Table, StandingHeight, Oval continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 178
Eames® Tables Eames® Conference Table, Oval page(s) 67 page(s) 67
Eames® Conference Table, Oval, Stone 85 85
Eames® Conference Table, Rectangular 55 55
Eames® Conference Table, Rectangular, Stone 83 83
Eames® Conference Table, Round 46 46
Eames® Conference Table, Round, Stone 79 79
Eames® Conference Table, Square 51 51
Eames® Conference Table, Square, Stone 81 81
Eames® Low Conference Table, Oval 32 32
Eames® Low Conference Table, Oval, Stone 44 44
Eames® Low Conference Table, Rectangular 26 26
Eames® Low Conference Table, Rectangular, Stone 42 42
Eames® Low Conference Table, Round 17 17
Eames® Low Conference Table, Round, Stone 38 38
Eames® Low Conference Table, Square 22 22
Eames® Low Conference Table, Square, Stone 40 40
Eames® Occasional Table, Round 5 5
Eames® Occasional Table, Round, Stone 13 13
Eames® Occasional Table, Square 9 9
Eames® Occasional Table, Square, Stone 15 15
Eames® Outdoor Occasional Table, Round 148 148
Eames® Outdoor Occasional Table, Square 150 150
Eames® Outdoor Table, Low Conference Height, Oval 154 154
Eames® Outdoor Table, Low Conference Height, Rectangular 152 152
Eames® Outdoor Table, Low Conference Height, Round 158 158
Eames® Outdoor Table, Low Conference Height, Square 156 156
Eames® Outdoor Table, Oval 168 168
Eames® Outdoor Table, Rectangular 166 166
Eames® Outdoor Table, Round 161 161
Eames® Outdoor Table, Square 164 164
Eames® Outdoor Table, Standing Height, Oval 177 177
Eames® Outdoor Table, Standing Height, Rectangular 175 175
Eames® Outdoor Table, Standing Height, Round 170 170
Eames® Outdoor Table, Standing Height, Square 173 173
Eames® Standing Height Table, Oval 113 113
Eames® Standing Height Table, Oval, Stone 135 135
Eames® Standing Height Table, Rectangular 97 97
Eames® Standing Height Table, Rectangular, Stone 133 133
Eames® Standing Height Table, Round 87 87
Eames® Standing Height Table, Round, Stone 129 129
Eames® Standing Height Table, Square 93 93
Eames® Standing Height Table, Square, Stone 131 131
Oval Power Module 140 140
Oval Power Module & Undermount Power 144 144
Pair of Oval Power Module & Undermount Power 146 146
Pair of Oval Power Modules 142 142
Round Dual USB Charging Unit 137 137
Round Power Module 138 138
Index: Product Nam
e
HermanMiller Eames® Tables Price Book (2/18) 179
Index by Product Name
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 179
180 Eames® Tables Price Book (2/18) HermanMiller
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 180
ET104 Eames® Conference Table, Square page(s) 51 page(s) 51
ET104 Eames® Conference Table, Square, Stone 81 81
ET105 Eames® Conference Table, Square 51 51
ET106
ET106 Eames® Conference Table, Square, Stone 81 81
ET107 Eames® Conference Table, Round 46 46
ET107 Eames® Conference Table, Round, Stone 79 79
ET108 Eames® Conference Table, Round 46 46
ET108 Eames® Conference Table, Round, Stone 79 79
ET109
ET110
ET122 Eames® Conference Table, Round 46 46
ET123
ET124
ET125
ET126
ET127
ET129
ET131
ET142 Eames® Conference Table, Rectangular 55 55
ET143 Eames® Conference Table, Oval 67 67
ET143 Eames® Conference Table, Oval, Stone 85 85
ET143 Eames® Conference Table, Rectangular 55 55
ET143 Eames® Conference Table, Rectangular, Stone 83 83
ET144 Eames® Conference Table, Oval 67 67
ET144 Eames® Conference Table, Rectangular 55 55
ET145
ET147 Eames® Conference Table, Oval 67 67
ET147 Eames® Conference Table, Rectangular 55 55
ET148 Eames® Conference Table, Square 51 51
ET149 Eames® Conference Table, Oval 67 67
ET150
ET150 Eames® Conference Table, Oval, Stone 85 85
ET150 Eames® Conference Table, Rectangular 55 55
ET150 Eames® Conference Table, Rectangular, Stone 83 83
ET151 Eames® Conference Table, Oval 67 67
ET151 Eames® Conference Table, Rectangular 55 55
ET152 Eames® Conference Table, Oval 67 67
ET152 Eames® Conference Table, Oval, Stone 85 85
ET152 Eames® Conference Table, Rectangular 55 55
ET152 Eames® Conference Table, Rectangular, Stone 83 83
ET153 Eames® Conference Table, Oval 67 67
ET154
ET154 Eames® Conference Table, Rectangular 55 55
ET155 Eames® Conference Table, Oval 67 67
ET155 Eames® Conference Table, Rectangular 55 55
ET156 Eames® Conference Table, Oval 67 67
ET156 Eames® Conference Table, Rectangular 55 55
ET157 Eames® Conference Table, Oval 67 67
ET157 Eames® Conference Table, Rectangular 55 55
ET158 Eames® Conference Table, Oval 67 67
ET158 Eames® Conference Table, Rectangular 55 55
ET160 Eames® Conference Table, Oval 67 67
ET160 Eames® Conference Table, Rectangular 55 55
ET161 Eames® Conference Table, Oval 67 67
ET161 Eames® Conference Table, Rectangular 55 55
ET162 Eames® Conference Table, Oval 67 67
ET162 Eames® Conference Table, Rectangular 55 55
ET164 Eames® Conference Table, Oval 67 67
ET164 Eames® Conference Table, Rectangular 55 55
ET166 Eames® Conference Table, Oval 67 67
ET166 Eames® Conference Table, Rectangular 55 55
ET168 Eames® Conference Table, Oval 67 67
ET168 Eames® Conference Table, Rectangular 55 55
ET170 Eames® Conference Table, Oval 67 67
ET170 Eames® Conference Table, Rectangular 55 55
ET171 Eames® Conference Table, Oval 67 67
ET171 Eames® Conference Table, Rectangular 55 55
ET172 Eames® Conference Table, Oval 67 67
ET172 Eames® Conference Table, Rectangular 55 55
ET173 Eames® Conference Table, Oval 67 67
ET173 Eames® Conference Table, Rectangular 55 55
ET174 Eames® Conference Table, Oval 67 67
ET174 Eames® Conference Table, Rectangular 55 55
ET175 Eames® Conference Table, Oval 67 67
ET175 Eames® Conference Table, Rectangular 55 55
ET176 Eames® Conference Table, Oval 67 67
ET176 Eames® Conference Table, Rectangular 55 55
ET177 Eames® Conference Table, Oval 67 67
ET177 Eames® Conference Table, Rectangular 55 55
ET178 Eames® Conference Table, Oval 67 67
ET178 Eames® Conference Table, Rectangular 55 55
ET187 Eames® Conference Table, Oval 67 67
ET187 Eames® Conference Table, Oval, Stone 85 85
ET187 Eames® Conference Table, Rectangular 55 55
ET187 Eames® Conference Table, Rectangular, Stone 83 83
ET188 Eames® Conference Table, Oval 67 67
ET188 Eames® Conference Table, Rectangular 55 55
ET189 Eames® Conference Table, Oval 67 67
ET189 Eames® Conference Table, Rectangular 55 55
ET204 Eames® Low Conference Table, Square 22 22
ET204 Eames® Low Conference Table, Square, Stone 40 40
Index: Product Num
ber
HermanMiller Eames® Tables Price Book (2/18) 181
Index by Product Number
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 181
ET205 Eames® Low Conference Table, Square 22 22
ET206
ET206 Eames® Low Conference Table, Square, Stone 40 40
ET207 Eames® Low Conference Table, Round 17 17
ET207 Eames® Low Conference Table, Round, Stone 38 38
ET208 Eames® Low Conference Table, Round 17 17
ET208 Eames® Low Conference Table, Round, Stone 38 38
ET209
ET210
ET222 Eames® Low Conference Table, Round 17 17
ET223
ET224
ET225
ET226
ET227
ET229
ET231
ET242 Eames® Low Conference Table, Rectangular 26 26
ET243 Eames® Low Conference Table, Oval 32 32
ET243 Eames® Low Conference Table, Oval, Stone 44 44
ET243 Eames® Low Conference Table, Rectangular 26 26
ET243 Eames® Low Conference Table, Rectangular, Stone 42 42
ET244 Eames® Low Conference Table, Oval 32 32
ET244 Eames® Low Conference Table, Rectangular 26 26
ET245
ET247 Eames® Low Conference Table, Oval 32 32
ET247 Eames® Low Conference Table, Rectangular 26 26
ET248 Eames® Low Conference Table, Square 22 22
ET249 Eames® Low Conference Table, Oval 32 32
ET250
ET250 Eames® Low Conference Table, Oval, Stone 44 44
ET250 Eames® Low Conference Table, Rectangular 26 26
ET250 Eames® Low Conference Table, Rectangular, Stone 42 42
ET251 Eames® Low Conference Table, Oval 32 32
ET251 Eames® Low Conference Table, Rectangular 26 26
ET252 Eames® Low Conference Table, Oval 32 32
ET252 Eames® Low Conference Table, Oval, Stone 44 44
ET252 Eames® Low Conference Table, Rectangular 26 26
ET252 Eames® Low Conference Table, Rectangular, Stone 42 42
ET253 Eames® Low Conference Table, Oval 32 32
ET254
ET254 Eames® Low Conference Table, Rectangular 26 26
ET255 Eames® Low Conference Table, Oval 32 32
ET255 Eames® Low Conference Table, Rectangular 26 26
ET256 Eames® Low Conference Table, Oval 32 32
ET256 Eames® Low Conference Table, Rectangular 26 26
ET257 Eames® Low Conference Table, Oval 32 32
ET257 Eames® Low Conference Table, Rectangular 26 26
ET287 Eames® Low Conference Table, Oval 32 32
ET287 Eames® Low Conference Table, Oval, Stone 44 44
ET287 Eames® Low Conference Table, Rectangular 26 26
ET287 Eames® Low Conference Table, Rectangular, Stone 42 42
ET288 Eames® Low Conference Table, Oval 32 32
ET288 Eames® Low Conference Table, Rectangular 26 26
ET289 Eames® Low Conference Table, Oval 32 32
ET289 Eames® Low Conference Table, Rectangular 26 26
ET304 Eames® Occasional Table, Square 9 9
ET304 Eames® Occasional Table, Square, Stone 15 15
ET305 Eames® Occasional Table, Square 9 9
ET306
ET306 Eames® Occasional Table, Square, Stone 15 15
ET307 Eames® Occasional Table, Round 5 5
ET307 Eames® Occasional Table, Round, Stone 13 13
ET308 Eames® Occasional Table, Round 5 5
ET308 Eames® Occasional Table, Round, Stone 13 13
ET309 Eames® Occasional Table, Round 5 5
ET309 Eames® Occasional Table, Round, Stone 13 13
ET310 Eames® Occasional Table, Round 5 5
ET310 Eames® Occasional Table, Round, Stone 13 13
ET348 Eames® Occasional Table, Square 9 9
ET404 Eames® Standing Height Table, Square 93 93
ET404 Eames® Standing Height Table, Square, Stone 131 131
ET405 Eames® Standing Height Table, Square 93 93
ET406
ET406 Eames® Standing Height Table, Square, Stone 131 131
ET407 Eames® Standing Height Table, Round 87 87
ET407 Eames® Standing Height Table, Round, Stone 129 129
ET408 Eames® Standing Height Table, Round 87 87
ET408 Eames® Standing Height Table, Round, Stone 129 129
ET409
ET410
ET422 Eames® Standing Height Table, Round 87 87
ET423
ET424
ET425
ET426
ET427
ET429
ET431
ET443 Eames® Standing Height Table, Oval, Stone 135 135
ET443 Eames® Standing Height Table, Rectangular, Stone 133 133
ET448 Eames® Standing Height Table, Square 93 93
Inde
x: P
rodu
ct N
umbe
rIndex by Product Number continued
182 Eames® Tables Price Book (2/18) HermanMiller
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 182
ET450 Eames® Standing Height Table, Oval, Stone 135 135
ET450 Eames® Standing Height Table, Rectangular, Stone 133 133
ET452 Eames® Standing Height Table, Oval, Stone 135 135
ET452 Eames® Standing Height Table, Rectangular, Stone 133 133
ET487 Eames® Standing Height Table, Oval, Stone 135 135
ET487 Eames® Standing Height Table, Rectangular, Stone 133 133
ET504 Eames® Standing Height Table, Square 93 93
ET504 Eames® Standing Height Table, Square, Stone 131 131
ET505 Eames® Standing Height Table, Square 93 93
ET506
ET506 Eames® Standing Height Table, Square, Stone 131 131
ET507 Eames® Standing Height Table, Round 87 87
ET507 Eames® Standing Height Table, Round, Stone 129 129
ET508 Eames® Standing Height Table, Round 87 87
ET508 Eames® Standing Height Table, Round, Stone 129 129
ET509
ET510 Eames® Outdoor Table, Round 161 161
ET510 Eames® Outdoor Table, Square 164 164
ET510 Eames® Standing Height Table, Round, Stone 129 129
ET511 Eames® Outdoor Table, Round 161 161
ET512
ET514 Eames® Outdoor Table, Oval 168 168
ET514 Eames® Outdoor Table, Rectangular 166 166
ET514 Eames® Outdoor Table, Square 164 164
ET515 Eames® Outdoor Table, Oval 168 168
ET515 Eames® Outdoor Table, Rectangular 166 166
ET518 Eames® Outdoor Table, Oval 168 168
ET518 Eames® Outdoor Table, Rectangular 166 166
ET520 Eames® Outdoor Table, Low Conference Height, Round 158 158
ET520 Eames® Outdoor Table, Low Conference Height, Square 156156
ET521 Eames® Outdoor Table, Low Conference Height, Round 158 158
ET522
ET522 Eames® Standing Height Table, Round 87 87
ET523
ET524 Eames® Outdoor Table, Low Conference Height, Oval 154 154
ET524 Eames® Outdoor Table, Low Conference Height,
Rectangular 152 152
ET524 Eames® Outdoor Table, Low Conference Height, Square 156156
ET524 Eames® Standing Height Table, Round 87 87
ET525 Eames® Outdoor Table, Low Conference Height, Oval 154 154
ET525 Eames® Outdoor Table, Low Conference Height,
Rectangular 152 152
ET525 Eames® Standing Height Table, Round 87 87
ET526
ET527
ET528 Eames® Outdoor Table, Low Conference Height, Oval 154 154
ET528 Eames® Outdoor Table, Low Conference Height,
Rectangular 152 152
ET529 Eames® Standing Height Table, Round 87 87
ET530 Eames® Outdoor Occasional Table, Round 148 148
ET530 Eames® Outdoor Occasional Table, Square 150 150
ET531 Eames® Outdoor Occasional Table, Round 148 148
ET531 Eames® Standing Height Table, Round 87 87
ET534 Eames® Outdoor Occasional Table, Square 150 150
ET540 Eames® Outdoor Table, Standing Height, Round 170 170
ET540 Eames® Outdoor Table, Standing Height, Square 173 173
ET541 Eames® Outdoor Table, Standing Height, Round 170 170
ET542
ET543 Eames® Standing Height Table, Oval, Stone 135 135
ET543 Eames® Standing Height Table, Rectangular, Stone 133 133
ET544 Eames® Outdoor Table, Standing Height, Oval 177 177
ET544 Eames® Outdoor Table, Standing Height, Rectangular 175 175
ET544 Eames® Outdoor Table, Standing Height, Square 173 173
ET545 Eames® Outdoor Table, Standing Height, Oval 177 177
ET545 Eames® Outdoor Table, Standing Height, Rectangular 175 175
ET548 Eames® Outdoor Table, Standing Height, Oval 177 177
ET548 Eames® Outdoor Table, Standing Height, Rectangular 175 175
ET548 Eames® Standing Height Table, Square 93 93
ET550 Eames® Outdoor Table, Standing Height, Round 170 170
ET550 Eames® Outdoor Table, Standing Height, Square 173 173
ET550 Eames® Standing Height Table, Oval, Stone 135 135
ET550 Eames® Standing Height Table, Rectangular, Stone 133 133
ET551 Eames® Outdoor Table, Standing Height, Round 170 170
ET552
ET552 Eames® Standing Height Table, Oval, Stone 135 135
ET552 Eames® Standing Height Table, Rectangular, Stone 133 133
ET554 Eames® Outdoor Table, Standing Height, Oval 177 177
ET554 Eames® Outdoor Table, Standing Height, Rectangular 175 175
ET554 Eames® Outdoor Table, Standing Height, Square 173 173
ET555 Eames® Outdoor Table, Standing Height, Oval 177 177
ET555 Eames® Outdoor Table, Standing Height, Rectangular 175 175
ET558 Eames® Outdoor Table, Standing Height, Oval 177 177
ET558 Eames® Outdoor Table, Standing Height, Rectangular 175 175
ET587 Eames® Standing Height Table, Oval, Stone 135 135
ET587 Eames® Standing Height Table, Rectangular, Stone 133 133
ET990. Round Dual USB Charging Unit 137 137
ET991. Round Power Module 138 138
ET992. Oval Power Module 140 140
ET993. Pair of Oval Power Modules 142 142
ET994. Oval Power Module & Undermount Power 144 144
ET995. Pair of Oval Power Module & Undermount Power 146 146
Index: Product Num
ber
HermanMiller Eames® Tables Price Book (2/18) 183
Index by Product Number continued
ETA_Feb2_HMI Prototype 20090107.qxd 1/4/2018 10:01 AM Page 183
HermanMiller
HermanMiller October 2013
Appendix: 20
-Day or Less/A
ssigned Lead-Time O
rder Information
20-Day or Less/Assigned Lead-Time Order Information
20-Day or Less and Assigned Lead-Time Programs
20-day or less and assigned lead-time products are designed for
established Herman Miller dealers with pre-approved credit.
Products are distributed from multiple manufacturing facilities
across the United States. All products and options not designated by
an Assigned Lead-Time icon A will ship in 20 business days or less
after being acknowledged by Herman Miller. Products and options
designated by an A are on the assigned lead-time program and will
ship in 20 days, less than 20 days, or more than 20 days from order
acknowledgement.
Ordering Procedure
Please place orders through Order Manager. If this is not available to
you, place orders through mail or fax. Verbal purchase orders will not
be accepted.
Order Entry fax number for Passage®, 5000 Series, and Meridian®
Filing and Storage: (616) 846 9236.
Order Entry fax number for all other products:
(616) 654 3085.
For more information, contact your Customer Care representative at:
(866) 854 3048 ext 3400.
Shipments and Delivery
Per Herman Miller Terms and Conditions.
Changes and Cancellation
Per Herman Miller Terms and Conditions.
HermanMiller
HermanMiller December 2016
Appendix: S
tain-to-Match Program
Stain-to-Match Program
Stain-to-Match Program
Program Overview
The Stain-to-Match program gives you the option of using veneer finishes
that are not listed in the standard offering. The program allows Herman
Miller to match a customer’s existing recut or natural veneer, or create anew finish that is unique to an installation.
Specific information on approval, ordering, pricing, and warranty for the
Stain-to-Match program is listed below. Questions and requests for
assistance may be directed to Herman Miller Options at:
(800) 654 3910
Ordering Products with Stain-to-Match Veneers
1. Fill out the Options Stain-to-Match Request Form and send along
with a color sample (2” x 3” minimum) to the Herman Miller OptionsApplications Team at the address provided on the form. The form
can be found on Omni.
2. Within 7-10 working days, Herman Miller Options will send a sample
of the color-matched stain on Herman Miller veneer to the requester
for the customer’s signed approval.
3. If the sample meets the customer’s approval, sign the reverse sideof the sample, scan and email the approval to:
4. After the stain has been approved, a formal quotation with special
number and pricing can be provided, or the product can be
specified through the Vary Easy program, if available. Work with the
Options team on final product needs and how to specify.
5. A purchase order can then be placed.
Stain-to-Match Warranty
Herman Miller warrants its products to be free from defects in
craftsmanship from the date of delivery for the applicable warranty
period. Herman Miller is responsible for the physical properties of the
veneers available through the Stain-to-Match program, which include:
STA: Stain-to-Match on Recut Ash
STB: Stain-to-Match on Beech
STC: Stain-to-Match on Cherry
STD: Stain-to-Match on Oak
STK: Stain-to-Match on Reltech Anigre (Geiger)
STM: Stain-to-Match on Recut Mahogany
STP: Stain-to-Match on Maple
STU: Stain-to-Match on Walnut (Geiger)
See your specification tool for product specific finish offering limitations.
For more information about our products and services or to see a list of dealers,please visit us at HermanMiller.com or call (800) 851 1196.
© 2018 Herman Miller, Inc., Zeeland, Michigan
®Z, Y, 3D Intelligent, AO, Action Office, Aeron, ArcSpan, Aside, Avall,Avive, Bubble Lamps, Canvas Office Landscape, Caper, Celle, Co/Struc, Daisyone,Distil, Eames, Eco-Dematerialized, Embody, Envelop, Equa 2, Ergon 3, Ethospace,Exclave, Fine-Tune, FlexFront, Flo, Formcoat, Formwork, Ground Cloth, Herman Millerfor the Home, Herman Miller for Healthcare, Intersect, Kinemat, Lapjack, LayoutStudio, Lifework, Limerick, Live Unframed, Living Office, Locale, Maharam, Meridian,Mirra, Passage, Pellicle, Perspectives, PostureFit, Public Office Landscape, Resolve,Rodney, Sayl, Setu, Thrive, Tu, Wishbone, and Y-Tower are among the registeredtrademarks of Herman Miller, Inc., and its owned subsidiaries.
™ 8Z Pellicle, About Face, AireWeave, Albert, Backfit, Bubbletack, Burdick Group,Butterfly Back, Celeste, Cellular Suspension, Clam, Compass, Connect, Cubert, DOT,Duracare, Durawrap, Eames Soft Pad, EnhancedAccess, Everywhere, Flex-Edge,Flute, Harmonic, Herman Miller Select, Hopsak 2, Intent, Iota, Jaw, Keyless Entry,Keyn Chair Group by Herman Miller, Latitude, Locale, Logic Mini, Logic Power AccessSolutions, Live OS, Loop, Lyris, Lyris 2, Made-to-Measure Storage, MetaformPortfolio, Mora, Motia, Multiscrim, Nelson, Pari, Pixelated Support, Plex, PostureFitSL, Prospect, Q, Renew, Sense, Soft Pad, Stackable, Stackable Storage, Striad,Swoop, Tone, TriFlex, Twist, Ubi, Verus and Wireframe are among the trademarks ofHerman Miller, Inc., and its owned subsidiaries.
SM Herman Miller Options is among the service marks of Herman Miller, Inc.
Alexander Girard® is a registered trademark of The Alexander Girard Estate.
Chemsurf® is a registered trademark of Wilsonart International.
Corian® is a registered trademark of E. I. du Pont de Nemours and CompanyCorporation.
Crypton® is a registered trademark of Crypton, Inc.
DACRON® is a registered trademark of INVISTA S.a r.l.
Edelman® Leather is a registered trademark of Edelman Leather, Inc.
FENIX NTM® is a registered trademark of Arpa Industriale S.p.A.
FLEXNET™ is a trademark of Milliken & Company.
Floor Saver Glide® is a registered trademark of Carpin Manufacturing, Inc.
Geiger® is a registered trademark, and Bumper™, Saiba™, and Ward Bennett™ aretrademarks, of Geiger International.
Goetz™ is a trademark of Mark W. Goetz.
Hang-It-All® is a registered trademark of Lucia Eames Demetrios, d.b.a. Eames Office.
Holophane® is a registered trademark of Holophane.
Ingeo™ is a trademark of Cargill Dow LLC.
iPad® is a registered trademark of Apple, Inc.
LifeSize® is a registered trademark of LifeSize Communications, Inc.
Magis®, Bombo®, and Me Too® are registered trademarks of Magis S.p.A.
Microsoft® and Natural® Keyboard are registered trademarks of MicrosoftCorporation.
Noguchi® and the Noguchi table configuration (trade dress) are registered trade-marks, and Rudder Table™ is a trademark, of The Isamu Noguchi Foundation andGarden Museum.
Place Textiles® is a registered trademark of Place Textiles.
SuperSeat™ is a trademark of Dahti Seating, a division of ITW.