pricing valid from june 1 to september 30...

2015 Summer FlyerPricing valid from June 1 to September 30 2015

CAT40 End Mill Holders• DIN Coolant option - standard• All Ground Body• 100% Forged Construction

*Stubby Length

(Sorry, you cannot mix CAT40 with CAT50)

• High Precision Alloy Steel Collets

CCAATT4400 1122--PPAACCKK TT0000LLIINNGG SSPPEECCIIAALL

Description Code No. List $ CAT40 ER16 x 2.50” 531-406 133.40CAT40 ER16 x 3.50”” 531-408 149.10CAT40 ER20 x 2.50” 531-412 150.20CAT40 ER20 x 4” 531-414 150.20CAT40 ER25 x 2.50” 531-418 155.90CAT40 ER25 x 4” 531-420 155.90CAT40 ER32 x 2.50” 531-421 149.40CAT40 ER32 x 3.13” 531-424 158.90

CAT40 ER Collet Chucks• Threaded through holes for a back-up

screw (tool stop) or coolant through when removed• Factory Balanced to save spindle life,

tool life and increase productivity• DIN Coolant option - standard• All Ground Body• 100% Forged Construction• Wrench not included

Huge Savings on a 12-Pack1. Select 6 Collet Chucks & 6 End Mill Holders

2. Choose a complimentary Collet Set 3. We will throw in a FREE 6” Asimeto Caliper

CAT40 (12PAK40)Sale Price: $ 1,299.00

You are saving up to $ 974.25

FREE!

Choose an Inch or Metric Collet Set

FREE!

FULLY CALIBRATED - 2 YEAR WARRANTY

IP67 Coolant Proof Digital Calipers• Range: 6” / O-150mm• Resolution: .0005" / 0.01mm• Accuracy:±.001” / ±0.02mm

Regular List $ 183.30Code No. 7305062

ER Collet Sets

Description Code No. List $ InchER16 11pc 1/16”- 3/8” 337-403 221.20ER20 20pc 1/16”- 1/2” 337-404 287.90ER25 13pc 1/8”- 5/8” 337-405 340.50ER32 17pc 1/8”- 3/4” 337-407 441.60MetricER16 10pc 0.5mm-8mm (.019” - .314”) 337-380 201.10ER20 12pc 1mm-13mm (.039” - .511”) 337-382 230.40ER25 15pc 1mm-16mm (.039” - .629”) 337-383 300.40ER32 18pc 2mm-20mm (.078” - .787”) 337-384 378.50

PROMO CODE 30x

CAT 40PremiumBalanced

RPM

30x


RPM

Description Code No. List $ CAT40 1/8” x 2.50” 531-070 119.30CAT40 3/16” x 2.50” 531-073 112.00CAT40 1/4” x 1.38”* 531-000 94.20CAT40 1/4” x 2.50” 531-002 98.90CAT40 3/8” x 1.38”* 531-012 94.20CAT40 3/8” x 2.50” 531-014 98.90CAT40 1/2” x 1.75”* 531-024 94.20CAT40 1/2” x 4” 531-028 103.80CAT40 5/8” x 1.75”* 531-032 94.20CAT40 5/8” x 3” 531-034 98.90CAT40 3/4” x 1.75”* 531-040 94.20CAT40 3/4” x 3” 531-042 98.90CAT40 1” x 2” 531-054 94.20CAT40 1” x 4” 531-056 103.80

2

ER Collet Sets

Description Code No. List $ InchER16 11pc 1/16”- 3/8” 337-403 221.20ER20 20pc 1/16”- 1/2” 337-404 287.90ER25 13pc 1/8”- 5/8” 337-405 340.50ER32 17pc 1/8”- 3/4” 337-407 441.60MetricER16 10pc 0.5mm-8mm (.019” - .314”) 337-380 201.10ER20 12pc 1mm-13mm (.039” - .511”) 337-382 230.40ER25 15pc 1mm-16mm (.039” - .629”) 337-383 300.40ER32 18pc 2mm-20mm (.078” - .787”) 337-384 378.50

CAT50 End Mill Holders

Description Code No. List $ CAT50 1/4” x 2.50” 531-084 145.50CAT50 3/8” x 2.50” 531-100 132.70CAT50 1/2” x 2.63” 531-118 132.70CAT50 1/2” x 4” 531-120 145.50CAT50 5/8” x 3” 531-128 132.70CAT50 5/8” x 6” 531-132 158.10CAT50 3/4” x 3” 531-138 132.70CAT50 3/4” x 6” 531-142 158.10CAT50 1” x 4” 531-154 136.00CAT50 1” X 6” 531-156 158.70CAT50 1-1/4” x 4” 531-162 158.70

(Sorry, you cannot mix CAT40 with CAT50)

• DIN Coolant option - standard• All Ground Body• 100% Forged Construction

• High Precision Alloy Steel Collets

• Threaded through holes for a back-upscrew (tool stop) or coolant through when removed

• Factory Balanced to save spindle life,tool life and increase productivity

• DIN Coolant option - standard• All Ground Body• 100% Forged Construction• Wrench not included

CCAATT5500 1122--PPAACCKK TT0000LLIINNGG SSPPEECCIIAALL

Description Code No. List $ CAT50 ER16 x 4” 531-432 221.80CAT50 ER20 x 4” 531-440 222.90CAT50 ER25 x 4” 531-448 228.50CAT50 ER32 x 4” 531-454 231.60

CAT50 ER Collet ChucksHuge Savings on a 12-Pack1. Select 6 Collet Chucks & 6 End Mill Holders

2. Choose a complimentary Collet Set 3. We will throw in a FREE 6” Asimeto Caliper

CAT50 (12PAK50)Sale Price: $ 1,744.00

You are saving up to $ 1,227.70

FREE!

Choose an Inch or Metric Collet Set

FREE!

FULLY CALIBRATED 2 YEAR WARRANTY

IP67 Coolant Proof Digital Calipers• Range: 6” / O-150mm• Resolution: .0005" / 0.01mm• Accuracy:±.001” / ±0.02mm

Regular List $ 183.30Code No. 7305062

PROMO CODE

25x


RPM

25x


RPM

3

4

DUAL CONTACT HOLDERS & CHUCKSFOR DUAL CONTACT SPINDLES

Collet ColletTaper Series Range L L1 D Code No. SALE $CT40 ER16 .019-.406” 2.50” 0.87” 1.26” 521-406 130.76CT40 ER16 .019-.406” 4.00” 0.87” 1.26” 521-405 152.25CT40 ER16 .019-.406” 6.00” 0.87” 1.26” 521-410 157.71CT40 ER32 .078-.787” 3.13” 1.34” 1.97” 521-424 155.75CT40 ER32 .078-.787” 4.00” 1.34” 1.97” 521-423 161.70CT40 ER32 .078-.787” 6.00” 1.34” 1.97” 521-425 173.11

Collet ColletTaper Series Range L L1 D Code No. SALE $CT50 ER16 .019-.406” 4.12” 0.87” 1.26” 521-432 217.42CT50 ER16 .019-.406” 6.00” 0.87” 1.26” 521-434 235.69CT50 ER16 .019-.406” 8.00” 0.87” 1.26” 521-436 270.41CT50 ER32 .078-.787” 4.00” 1.34” 1.97” 521-454 227.01CT50 ER32 .078-.787” 6.00” 1.34” 1.97” 521-456 233.73CT50 ER32 .078-.787” 8.00” 1.34” 1.97” 521-458 281.19

CAT40 DUAL CONTACT ER Collet Chucks

30x


RPM

Complete with certificate

CAT50 DUAL CONTACT ER Collet Chucks

25x


RPM


• Improves rigidity and reduces vibration allowing for increased feed rates and increased tool life.


FOR DUAL CONTACT SPINDLES


• Improves rigidity and reduces vibration allowing for increased feed rates and increased tool life.



Features:• Improves rigidity and reduces vibration allowing for

increased feed rates and increased tool life.• Premium Balanced up to 30,000 rpm• DIN Coolant option - standard• All Ground Body• 100% Forged Construction

Eliminates the gap between the flange and the spindle for increased rigidity


30x


RPM

CAT40/50 DUAL CONTACT End Mill Holders

Hole Gage SetTaper Dia. (d) Length (L) L1 D Screw Code No. SALE $CT40 1/2” 2.50” 1.50” 1.38” 7/16-20 521-026 96.95CT40 1/2” 4.00” 1.50” 1.38” 7/16-20 521-028 101.78CT40 1/2” 5.00” 1.50” 1.38” 7/16-20 521-030 114.80CT40 5/8” 3.00” 1.61” 1.65” 9/16-18 521-034 96.95CT40 5/8” 4.00” 1.61” 1.65” 9/16-18 521-036 101.78CT40 3/4” 3.00” 1.77” 1.75” 5/8-18 521-042 96.95CT40 3/4” 4.00” 1.77” 1.75” 5/8-18 521-044 101.78CT40 3/4” 5.50” 1.77” 1.75” 5/8-18 521-046 110.60CT40 1” 2.00” 2.36” 2.36” 3/4-16 521-054 92.33CT40 1” 4.00” 2.36” 2.36” 3/4-16 521-056 101.78CT40 1” 6.00” 2.36” 2.36” 3/4-16 521-058 116.06CT40 1-1/4” 2.00”* 2.28” 2.25” 3/4-16 521-060 92.33CT40 1-1/4” 4.00” 2.55” 2.48” 3/4-16 521-062 101.78CT40 1-1/4” 6.00” 2.55” 2.48” 3/4-16 521-064 116.06CT40 1-1/2” 4.50” 2.55” 2.99” 3/4-16 521-066 116.76

25x


RPM

CAT40

CAT50Hole Gage Set

Taper Dia. (d) Length (L) L1 D Screw Code No. SALE $CT50 1/2” 4.00” 1.50” 1.38” 7/16-20 521-120 142.59CT50 1/2” 6.00” 1.50” 1.38” 7/16-20 521-122 154.98CT50 5/8” 4.00” 1.61” 1.65” 9/16-18 521-130 142.59CT50 5/8” 6.00” 1.61” 1.65” 9/16-18 521-132 154.98CT50 3/4” 3.00” 1.77” 1.89” 5/8-18 521-138 130.06CT50 3/4” 4.00” 1.77” 1.89” 5/8-18 521-140 142.59CT50 3/4” 6.00” 1.77” 1.89” 5/8-18 521-142 154.98CT50 1” 4.00” 2.36” 2.36” 3/4-16 521-154 133.28CT50 1” 6.00” 2.36” 2.36” 3/4-16 521-156 155.54CT50 1” 8.00” 2.36” 2.36” 3/4-16 521-158 181.16CT50 1-1/4” 4.00” 2.55” 2.48” 3/4-16 521-162 155.54CT50 1-1/4” 6.00” 2.55” 2.48” 3/4-16 521-164 172.34CT50 1-1/4” 8.00” 2.55” 2.48” 3/4-16 521-166 198.31CT50 1-1/2” 4.50” 2.83” 2.99” 3/4-16 521-170 155.54CT50 1-1/2” 7.00” 2.83” 2.99” 3/4-16 521-172 180.74CT50 2” 5.37” 3.34” 3.74” 1”-14 521-178 190.33

SAVE 30%

DUAL CONTACT HOLDERS

5

DIRECT COOLANT HOLDERS

NOW 3 COOLANT OPTIONS ALL IN ONE!DIRECT COOLANT HOLDERS

Features:• Coolant thru the spindle• DIN Coolant thru the flange option• Coolant thru the body• Premium Balanced up to 30,000 rpm• All Ground Body• 100% Forged Construction

Coolant thru slots for directing coolant onto thetool.

O-Ring Seal for Non DirectCoolant Operations.

Complete with certificate Complete with certificate

30x


RPM25x


RPM

Hole Gage SetTaper Dia. (d) Length (L) L1 D Screw Code No. SALE $CT40 1/4” 2.50” 1.10” 0.79” 1/4-28 522-016 93.66CT40 1/4” 4.00” 1.10” 0.79” 1/4-28 522-018 98.21CT40 5/16” 1.38”* 1.34” 0.87” 5/16-24 522-022 89.32CT40 5/16” 2.50” 1.26” 0.87” 5/16-24 522-024 93.66CT40 5/16” 4.00” 1.26” 0.87” 5/16-24 522-026 98.21CT40 3/8” 1.38”* 1.34” 1.00” 3/8-24 522-030 89.32CT40 3/8” 2.50” 1.26” 1.00” 3/8-24 522-032 93.66CT40 3/8” 4.00” 1.26” 1.00” 3/8-24 522-034 98.21CT40 3/8” 5.00” 1.26” 1.00” 3/8-24 522-036 106.75CT40 1/2” 1.75”* 1.50” 1.38” 7/16-20 522-046 89.32CT40 1/2” 2.50” 1.50” 1.38” 7/16-20 522-048 93.66CT40 1/2” 4.00” 1.50” 1.38” 7/16-20 522-050 98.21CT40 1/2” 5.00” 1.50” 1.38” 7/16-20 522-052 110.95CT40 5/8” 1.75”* 1.61” 1.65” 9/16-18 522-056 89.32CT40 5/8” 3.00” 1.61” 1.65” 9/16-18 522-058 93.66CT40 5/8” 4.00” 1.61” 1.65” 9/16-18 522-060 98.21CT40 5/8” 5.50” 1.61” 1.65” 9/16-18 522-062 106.75CT40 3/4” 1.75”* 1.77” 1.89” 5/8-18 522-066 89.32CT40 3/4” 3.00” 1.77” 1.75” 5/8-18 522-068 93.66CT40 3/4” 4.00” 1.77” 1.75” 5/8-18 522-070 98.21CT40 3/4” 5.50” 1.77” 1.75” 5/8-18 522-072 106.75CT40 1” 2.00”* 2.36” 2.25” 3/4-16 522-080 89.32CT40 1” 4.00” 2.36” 2.36” 3/4-16 522-082 98.21CT40 1-1/4” 2.00”* 2.28” 2.25” 3/4-16 522-088 89.32CT40 1-1/4” 4.00” 2.55” 2.48” 3/4-16 522-090 98.21

Hole Gage SetTaper Dia. (d) Length (L) L1 D Screw Code No. SALE $CT50 1/4” 2.50” 1.10” 0.79” 1/4-28 522-102 137.83CT50 1/4” 4.00” 1.10” 0.79” 1/4-28 522-104 137.83CT50 3/8” 2.50” 1.26” 1.00” 3/8-24 522-118 125.72CT50 3/8” 4.00” 1.26” 1.00” 3/8-24 522-120 137.83CT50 1/2” 1.75”* 1.50” 1.38” 7/16-20 522-134 125.72CT50 1/2” 2.63” 1.50” 1.38” 7/16-20 522-136 125.72CT50 1/2” 4.00” 1.50” 1.38” 7/16-20 522-138 137.83CT50 1/2” 6.00” 1.50” 1.38” 7/16-20 522-140 149.87CT50 5/8” 1.75”* 1.61” 1.65” 9/16-18 522-148 125.72CT50 5/8” 3.00” 1.61” 1.65” 9/16-18 522-150 125.72CT50 5/8” 4.00” 1.61” 1.65” 9/16-18 522-152 137.83CT50 5/8” 6.00” 1.61” 1.65” 9/16-18 522-154 149.87CT50 3/4” 1.75”* 1.77” 1.89” 5/8-18 522-158 125.72CT50 3/4” 3.00” 1.77” 1.89” 5/8-18 522-160 125.72CT50 3/4” 4.00” 1.77” 1.89” 5/8-18 522-162 137.83CT50 3/4” 6.00” 1.77” 1.89” 5/8-18 522-164 149.87CT50 1” 2.00”* 2.36” 2.36” 3/4-16 522-176 125.72CT50 1” 4.00” 2.36” 2.36” 3/4-16 522-178 128.87CT50 1” 6.00” 2.36” 2.36” 3/4-16 522-180 150.22CT50 1-1/4” 2.00”* 2.55” 2.75” 3/4-16 522-186 143.36CT50 1-1/4” 4.00” 2.55” 2.48” 3/4-16 522-188 150.22CT50 1-1/4” 6.00” 2.55” 2.48” 3/4-16 522-190 166.53

SSAAVVEE 3300%%

CAT40 Direct Coolant Holder CAT50 Direct Coolant Holder

6

SPECIAL REDUCEDPRICING!

SSKKOODDAA LLIIVVEE CCEENNTTEERRSSSkoda Heavy Duty Live Centers - CSN 243324M

Centre MaximumMorse Point Body Body Body Weight ofTaper Angle Dia. (in) Dia. (in) Length (in) Work Piece Code No. LIST $ SALE $

1 60° 5⁄8 1-3⁄8 4-3⁄8 200 lb 310-105 102.60 66.692 60° 7⁄8 1-1⁄2 5 750 lb 310-110 153.00 99.453 60° 1-1⁄8 1-7⁄8 6-1⁄4 880 lb 310-115 191.30 124.354 60° 1-1⁄2 2-3⁄16 7-1⁄2 2860 lb 310-120 242.50 157.635 60° 1-3⁄4 2-3⁄4 9-1⁄2 4400 lb 310-125 335.90 218.346 60° 2-3⁄8 3-1⁄2 12-3⁄4 8800 lb 310-130 582.20 378.43

Features• The rotating spindle is extended right through the tapered shank• Two specially designed adjustable needle-roller bearings carry all radial loads• A heavy duty ball thrust bearing takes all axial thrust• Complete protection of bearings from the ingress of coolant, dirt or swarf is provided by the

built-in oil-seal, which also prevents loss of lubricant

• The centers are intended for NC lathes. Their face parts are formed to allow easy access of the tool to the workpiece, which isan advantage with workpieces of complex shapes

• A special ring is used to set the radial clearance of the center. It also prevents cutting lubricant from leaking into the center bearing space, and so extends the operational life of the center

• Spindle-like point extends into shank where it is supported by a needle bearing, increasing rigidity, reducing point deflection and dampening vibration

Skoda Precision CNC Live Centers - CSN 243327-II

Morse D d L l LoadTaper (in.) (in) (in.) (in.) (lb) Code No. LIST $ SALE $

3 1.85 .750 6.75 3.50 1550 310-015 322.90 209.894 2.20 1.125 8.15 3.95 4840 310-020 376.40 244.665 3.10 1.375 10.50 4.85 7750 310-025 473.60 307.84

Skoda Live Center Sets - CSN 243326Features• The rotating spindle is extended right through the tapered shank• Two specially designed adjustable needle-roller bearings carry all

radial loads• A heavy duty ball thrust bearing takes all axial thrust• Complete protection of bearings from the ingress of coolant, dirt

or swarf is provided by the built-in oil-seal, which also prevents loss of lubricant

Morse All A B-G A B C D E F GTaper d l L L D D1 D D1 D D1 D D1 D2 D D1 D2 D D1 D Code No. LIST $ SALE $

3 .590 .984 1.968 1.771 .787 .019 1.417 .236 2.480 1.299 1.417 1.102 .472 1.771 1.496 .866 .787 .098 .984 310-705 693.10 450.524 .784 1.181 2.362 2.086 .984 .019 1.771 .393 2.755 1.378 1.771 1.456 .669 2.480 2.086 1.181 .984 .196 1.259 310-710 819.30 532.555 .984 1.496 2.874 2.559 1.259 .039 2.204 .551 3.149 1.496 2.204 1.732 .787 2.775 2.362 1.417 1.259 .196 1.771 310-715 1,197.20 778.186 1.181 1.811 3.543 3.149 1.417 .039 2.755 .708 3.937 1.968 2.755 2.283 .950 3.937 3.464 2.126 1.417 .315 2.204 310-720 1,725.00 1,121.25

7

MADE IN JAPAN

HSSE-V3% VANADIUM CNC MACHINE TAPS

• 2.5 PITCH LEAD (BOTTOMING)

SAVE 20%

• 4.5 PITCH LEAD (INTERMEDIATE)

*SPECIAL LIMIT

SPIRAL POINT TAPS INCHThreads No. Thread O/A Length Thread Length

Tap Per Inch Flutes Limits (in) (in) Code No. Price $3 48 2 H2 1-13/16 .512 122-552 8.964 40 2 H2 1-7/8 .433 123-296 8.964 40 2 *H3 1-7/8 .433 122-554* 8.966 32 3 H3 2 .512 123-300 8.006 40 3 H3 2 .512 123-334 8.008 32 3 H3 2-1/8 .512 123-302 8.4810 24 3 H3 2-3/8 .512 123-304 8.7210 32 3 H3 2-3/8 .512 123-338 8.7212 24 3 H3 2-3/8 .512 123-306 9.361/4 20 3 H3 2-1/2 .630 123-308 9.841/4 28 3 H3 2-1/2 .630 123-342 9.845/16 18 3 H3 2-23/32 .748 123-310 12.005/16 24 3 H3 2-23/32 .748 123-344 12.003/8 16 3 H3 2-15/16 .748 123-312 14.483/8 24 3 H3 2-15/16 .748 123-346 14.567/16 14 3 H3 3-5/32 .866 123-314 18.967/16 20 3 H3 3-5/32 .866 123-348 18.961/2 13 3 H3 3-3/8 .945 123-316 21.041/2 20 3 H3 3-3/8 .945 123-350 21.045/8 11 3 H3 3-13/16 1.102 123-318 33.205/8 18 3 H3 3-13/16 1.102 123-352 33.203/4 10 3 H3 4-1/4 1.220 123-320 55.683/4 16 3 H3 4-1/4 1.220 123-353 55.687/8 9 3 H4 4-11/16 1.339 123-321 77.681 8 4 H4 5-1/8 1.496 123-323 104.321 12 4 H4 5-1/8 1.496 123-361 104.321 14 4 H4 5-1/8 1.496 123-360 104.32

1-1/8 7 4 H4 5-7/16 1.732 123-364 147.761-1/4 7 4 H4 5-3/4 1.732 123-367 172.001-1/4 12 4 H4 5-3/4 1.732 123-369 172.00

SALE

• Superior performance in hardened tool steels such as 4140, 4340, H13, D2, Up to 35 HRC

YELLOW RING SPIRAL POINT TAPS

METRIC TAPS ALSO AVAILABLE

HHSSSSEE YYEELLLLOOWW RRIINNGG TTAAPPSS

SPIRAL FLUTE TAPS INCHThreads No. Thread O/A Length Thread Length

Tap Per Inch Flutes Limits (in) (in) Code No. Price $

3 48 2 H2 1-13/16 .512 122-502 13.364 40 2 H2 1-7/8 .250 123-362 11.206 32 3 H2 2 .313 123-366 11.208 32 3 H2 2-1/8 .313 123-368 11.2010 24 3 H3 2-3/8 .417 123-370 11.2010 32 3 H3 2-3/8 .417 123-382 11.201/4 20 3 H3 2-1/2 .500 123-372 11.841/4 28 3 H3 2-1/2 .500 123-384 11.845/16 18 3 H3 2-23/32 .556 123-374 14.245/16 24 3 H3 2-23/32 .556 123-386 14.243/8 16 3 H3 2-15/16 .625 123-376 17.123/8 24 3 H3 2-15/16 .625 123-388 17.127/16 14 3 H3 3-5/32 .714 123-378 25.607/16 20 3 H3 3-5/32 .714 123-389 28.161/2 13 3 H3 3-3/8 .769 123-380 29.361/2 20 3 H3 3-3/8 .769 123-392 29.365/8 11 4 H3 3-13/16 .909 123-452 44.403/4 10 4 H3 4-1/4 1.000 123-454 60.807/8 9 4 H4 4-11/16 1.111 123-466 86.561 8 4 H4 5-1/8 1.250 123-469 116.881 12 4 H4 5-1/8 1.250 123-470 116.881 14 4 H4 5-1/8 1.250 123-465 120.96

1-1/8 12 4 H4 5-7/16 1.429 123-472 167.121-1/4 7 4 H4 5-3/4 1.429 123-473 179.361-1/4 12 4 H4 5-3/4 1.429 123-474 179.361-3/8 12 4 H4 6-1/16 1.667 123-476 240.561-1/2 6 4 H4 6-3/8 1.667 123-477 290.001-1/2 12 4 H4 6-3/8 1.667 123-478 290.00

SALE

Printed in Canada

*USF2152*

Pricing valid from June 1 to September 30 2015, or while quantities last.

Sowa Tool & Machine Co. Ltd.500 Manitou DriveKitchener, OntarioN2C 1L3

Toll Free: 1-800-265-8221Phone: (519) 748-5750Fax: (519) 748-9304Email: [email protected]: www.sowatool.com

Maumee, Ohio Branch416 Dussel DriveMaumee, Ohio43537

Distributed By:

• MATCHED VISES• INTERCHANGEABLE SOFT JAWS

6” X 7.5” Opening: $426.17 - Code # 327-275M6” X 8.9” Opening: $478.15 - Code # 327-290M8” X 10” Opening: $982.94 - Code # 327-300

675, 890, 810Quality Machine Vises

10 yearwarranty

STOCK IN USA

Collet End Mill Tap Size MaxTaper Model System Drill Cap Capacity R.P.M Code No. SALE $CAT40 GFX07 ER11 7mm M5 6,000 381-002 7,267.39CAT40 GFX10 ER16 10mm M8 4,000 381-020 5.581.10CAT40 GFX16 ER25 16mm M12 4,000 381-100 6,381.41CAT50 GFX16 ER25 16mm M12 4,000 381-102 6,478.10CAT40 GFX20 ER32 20mm M14 4,000 381-148 7,175.70

Collet End Mill Tap Size MaxTaper Model System Drill Cap Capacity R.P.M Code No. SALE $CAT40 GPV16 ER25 16mm M12 4,000 381-270 7,534.49CAT50 GPV20 ER32 20mm M16 4,000 381-150 9,567.60

Fixed Right Angle Heads

Pivoting Right Angle Heads

SPECIAL

• Gleason ground spiral bevel gears• Internal coolant from positioning pin• Internal air pressure• Retaining block• Wrenches• Grease tube• Instruction book & Insection report

Standard Features

pricing valid from june 1 to september 30...

Documents