print & cut instructions

Click on the registration marks icon located along the upper right-hand tool bar and select ‘Show Reg Marks’. You will note that there are now crosshatched areas on three corners of your workspace. Ensure that your design does not overlap the crosshatched area.

Create a new file (make sure that your workspace matches the size of paper you will be printing on), place a print & cut image in the workspace, and size it as desired. (A print & cut image consists of a design to be printed and corresponding cut lines. The cut lines are not printed.)

Once you have your image placed on the screen to your liking, print your job to your regular printer by clicking on the Print icon.

4 5

Load your printed material into the Silhouette (use a cutting mat if necessary).Select the appropriate material from media list of the Silhouette Cut Settings menu and adjust your blade accordingly.

Click ‘Cut’ and your Silhouette will begin scanning the page for the printed registration marks. After the registration marks are found, the Silhouette will proceed to cut as usual.

In addition to regular print paper and cardstock, there is a large selection of Silhouette materials that can be used with the print & cut feature, including:

• printable heat transfer material• printable gold & silver foil• printable white & clear sticker paper• printable magnet paper• printable tattoo paper• printable cotton canvas• printable adhesive kraft paper

21 3