printed circuit board manufacturing
TRANSCRIPT
![Page 1: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/1.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Printed Circuit Board
Manufacturing
Richard Puthota
Cookson India Ltd
December 2010
![Page 2: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/2.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
THIS DOCUMENT AND RELATED MATERIALS AND INFORMATION
ARE PROVIDED "AS IS" WITH NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, NON-INFRINGEMENT OF INTELLECTUAL
PROPERTY RIGHTS, OR ANY WARRANTY OTHERWISE ARISING
OUT OF ANY PROPOSAL, SPECIFICATION, OR SAMPLE.
COOKSON INDIA PVT LTD ASSUMES NO RESPONSIBILITY FOR ANY ERRORS CONTAINED
IN THIS DOCUMENT AND HAS NO LIABILITIES OR OBLIGATIONS FOR ANY DAMAGES
ARISING FROM OR IN CONNECTION WITH THE USE OF THIS DOCUMENT.
COOKSON INDIA PVT LTD MAY MAKE CHANGES TO SPECIFICATIONS,
PRODUCTDESCRIPTIONS, AND PLANS AT ANY TIME, WITHOUT NOTICE.
Disclaimer
![Page 3: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/3.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
PCB
A PRINTED CIRCUIT BOARD PROVIDES A MECHANICAL PLATFORM FOR ELECTRONIC COMPONENTS (ACTIVE
SEMICONDUCTORS, RESISTORS, CAPACITORS, CONNECTORS, ETC.)
A PC BOARD PROVIDES 3- DIMENSIONAL ELECTRICAL INTERCONNECT FOR DEVICES INCLUDING SIGNAL, POWER,
AND GROUND CIRCUITS.
A PRINTED CIRCUIT BOARD IS SIMULTANEOUSLY AN ELECTRICAL DEVICE, A MECHANICAL DEVICE, AND A
THERMAL DEVICE.
Courtesy : Multek
![Page 4: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/4.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
UNITS MICRO INCHES MILS INCHES ANGSTROMS MICRONS MM
MICRO INCH 1 0.001 0.000001 250 0.025 0.000025
MICRON 40 0.04 0.00004 10000 1 0.001
MIL 1000 1 0.001 250000 25 0.025
MM 40,000 40 0.04 10 7 1000 1
MEASURING UNITS FOLLOWED IN PCB INDUSTRY
Capability of a PCB Manufacturer
Courtesy : Multek
![Page 5: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/5.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
PCB Process flow
Courtesy : Multek
![Page 6: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/6.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
PCB Process flow ..Confused?
![Page 7: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/7.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
PCB Value flow - simpler way
Sales CAD /CAM Engineering Plotting Inner layer
Processing
Dev/Etch/StripML LaminationDrillingDeSmearElectroless Cu
![Page 8: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/8.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Process flow
Optional
Outer-layer
Processing
Electrolytic Cu Strip / Etch / Strip Tin
Solder mask / LP Hot-Air Leveling
Immersion GoldNC RoutingV - Scoring100% E-TestFinal Q/C
Shipping
![Page 9: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/9.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Why Copper?
Copper is an excellent electrical conductor
Electrical resistivity is approx 1.6 micro ohm cm
An inexpensive metal
Soft and easily workable
Easily processed and patternable by photolithography, using
relatively benign chemicals
![Page 10: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/10.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Copper Foil
Copper is the dominant metal for interconnection use.
The copper foil is normally specified by weight i.e. one half oz
per square ft (152.5 g/m2), oz per sq ft (305 g/m2).
These correspond to foil thicknesses of 17.5 and 35 microns
respectively.
It is usually produced by electrolytic deposition on a flat
mandril, and is about 99.8% pure and has a tolerance on
thickness of about ± 10%.
![Page 11: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/11.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Copper Foil
Copper can be easily electrodeposited onto a PCB Laminate –
problems however!
ADHESION!
The adhesion is far superior from bonding copper foil sheets
by the combination of heat, pressure and adhesive.
Common adhesion tests include measurement of Peel
Strength – ‘how easy is it to peel the copper foil off’ and Pull
off Strength – how easy is it to pull up the copper foil from
the substrate
![Page 12: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/12.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
PREPREG MFG PROCESSCu FOIL MFG PROCESS
PCB Substrates Reinforcement Materials
![Page 13: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/13.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
PCB Substrates Reinforcement Materials
PREPREGS
![Page 14: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/14.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
PCB Substrates ( Laminate) MFG Process Flow
![Page 15: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/15.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
PCB Laminate MFG Process
![Page 16: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/16.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
The glass transition temperature or Tg of a polymer is the temperature at which a polymer
transitions from a glassy to rubbery state upon heating and reflects the degree of polymer
Chain motion.
Tg
![Page 17: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/17.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Typical Dielectric Constants
Material Dielectric Constant
FR4 Fiberglass Epoxy 4.7
Teflon 2.2
Teflon Glass 2.5
Polyimide 3.5
Polyimide Glass 4.2
PCB Substrates
![Page 18: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/18.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
PCB Substrates
![Page 19: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/19.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
PCB Substrates
![Page 20: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/20.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
PCB Substrates
One important non-electrical characteristic is the maximum
temperature at which boards can be operated. This is also relevant
for the curing of printed epoxies and thick film pastes on the
boards.
Resin Reinforcement Maximum temperature 'C
Phenolic Paper 100
Glass 250
Epoxy Glass 120
Polyester Glass 120
Silicone Glass 250
Teflon Glass 200
![Page 21: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/21.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
The produced laminate boards must be robust enough to withstand
abuse during processing stages and in later life on the finished product.
Abuse can include:
Changes in temperature – sometimes rapid and hot and cold
Flexing – the boards may have to be flexed, particularly during
processing stages.
Resistance to chemicals, e.g. solvents, fluxes, acids etc.
Physical abuse – to a certain extent being dropped!
Robustness of Boards
![Page 22: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/22.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Single Sided PCB Board Double Sided
PCB Board
Top layer has been patterned in alignment with bottom layer
Holes are drilled through board and then copper is
electrodeposited to interconnect top and bottom layers
![Page 23: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/23.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Multilayer Boards
On multilayer boards, the individual, copper patterned laminates are stacked on
top and bottom of each other. Insulating layers between the conductors can also
be added.
Often begin with double sided board in middle and work outwards
Laminates then pressed, heated and bonded in a similar process to before.
Holes then drilled in appropriate places for subsequent electrodeposition of
copper to interconnect layers.
![Page 24: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/24.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
FLEXIBLE PCB’s
More and more interest being shown to flexible PCB’s
Applications include flexible interconnections. Advanced
applications include small screens, e.g. mobile phones – and large
‘roll up’ screens
Common substrate choices include polyester, polyimide etc.
Typical problems – flexing substrate can cause metal tracks and
components etc. to ‘peel’ off
Resistance of metal conductors can also be different when
substrate is flexed
![Page 25: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/25.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
FLEXIBLE PCB’s
Flexible circuits can reduce weight of PCB
Flexing can allow easier installation and servicing
Production can be inexpensive
![Page 26: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/26.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
FLEXIBLE DISPLAYS
Flexible Displays can take up less space (rolled up)
– more portable
Active elements can be TFT’s deposited by vapour deposition (amorphous
silicon) – also printed organic materials
![Page 27: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/27.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Pre Clean
Courtesy : Multek
![Page 28: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/28.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Laminate Photo Resist
Courtesy : Multek
![Page 29: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/29.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Image & Develop
Courtesy : Multek
![Page 30: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/30.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Etch & Strip Photo Resist
Courtesy : Multek
![Page 31: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/31.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Prepare Target & Tooling Holes
Courtesy : Multek
![Page 32: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/32.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
AOI
Courtesy : Multek
![Page 33: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/33.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Oxide Coating
Courtesy : Multek
![Page 34: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/34.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Lamination Of a 6 Layer Board
Courtesy : Multek
![Page 35: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/35.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Drill & De-burr
Courtesy : Multek
![Page 36: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/36.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Desmear & Copper Deposition
Courtesy : Multek
![Page 37: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/37.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Coat, Image & Develop Photoresist
Courtesy : Multek
![Page 38: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/38.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Copper & Tin Plate
Courtesy : Multek
![Page 39: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/39.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Strip Photo Resist
Courtesy : Multek
![Page 40: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/40.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Etch & Tin Strip
Courtesy : Multek
![Page 41: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/41.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Solder Mask
Courtesy : Multek
![Page 42: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/42.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Solder Mask
![Page 43: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/43.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Solder Mask
![Page 44: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/44.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Solder Mask
![Page 45: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/45.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Typical Surface Finishing Technologies
![Page 46: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/46.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Hot Air Leveling
Air knife off-set
SolderPCB
Clamp to hold PCB
![Page 47: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/47.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Advantage of greater thickness control in Pb Free HAL
Improved gasket sealing during solder paste
printing on fine features.
Laminate
Stencil
Sn/Pb
Lead-Free
Laminate
Stencil
![Page 48: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/48.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Conveyorized Dip Module
Manifold
PCB
OR
Coating Chemistry Sump
CHEMISTRY
COATING
PCB
OSP Organic Solderability Preservative
![Page 49: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/49.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
OSP VISUAL INSPECTION CRITERIA
Courtesy : Enthone, Cookson Electronics
![Page 50: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/50.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
ENTEK®
OSPHASL FST
Immersion SnNi-Au AlphaLevel
Immersion AgCost Lowest Medium Medium Highest Low
Fine Pitch Excellent Poor Excellent Good Excellent
Multi Pass Medium Excellent Good Good Good
Wave OK Variable Excellent Good Poor Good
Ease of Mfr Easy Difficult Medium Difficult Easy
Warping Low High Low Low Low
Comparison of PCB Surface Finishes
![Page 51: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/51.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
ATTRIBUTES
1 1 10 9Wire Bondability
Wire Bondable = 10; Can't wire bond = 1
1 1 1
10
10
9
97
10
10
8
82
10
2
6
510
10
2
6
1
10
1
10
10
10
2
6
10
10
7
10
7
10
9
10
5
10 1 3 4 10 10 10
CO-PLANARITY(FLATNESS) Flat Pads = 10; Non Planar Pads = 1
Risk of removing Protective Coat during rework Not easy to remove = 10; Easy to remove = 1
Solderability at Wave Solde ( No prior Reflow)
Highly Solderable = 10; Least = 1
Solderability at Wave Solder (after 2-3 reflows using no clean flux)
Highly Solderable = 10; Least = 1
Cost Of PCB Fabrication Lowest Cost = 10; Highest = 1
Pin Testability of Bare Board Most Pin Testable = 10; Least = 1
Shelf - Life Longest = 10; Shortest = 1
Ionic Cleanliness Least Contamination =10; Most = 1
PROPERTY OF COPPER COATING
ALTERNATIVE COATINGS
PROPERTY COMPARISON OF ALTERNATIVE COPPER PROTECTIV E COATINGS
9 6 3 6 9
Amidazole/ Benzimidazole
Immersion Bismuth
Immersion Silver
Hot Air Solder Leveled
Rosin / Resin Coating
Benzo - Triazole
1 5 10
Electroless Nickel/Gold
5 8 10 7 7 1
Comparison of PCB Surface Finishes
![Page 52: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/52.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Tip Plating – Apply Plating Tape
Courtesy : Multek
![Page 53: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/53.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Solder Strip Fingers
Courtesy : Multek
![Page 54: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/54.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Nickel Plate Fingers
Courtesy : Multek
![Page 55: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/55.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Gold Plate Fingers & Strip Tape
Courtesy : Multek
![Page 56: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/56.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Component Mark Printing
Courtesy : Multek
![Page 57: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/57.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Fabrication Rout & Chamfer
Courtesy : Multek
![Page 58: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/58.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
Electrical testing checks the boards forany open or short type defects, before
shipping to the customer.
Electrical Test (BBT)
Courtesy : Multek
![Page 59: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/59.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
• For a company manufacturing electronic equipment, it is risky to depend on just
one PCB manufacturing source.
• It is important that the PCB manufacturer and the OEM / EMS are thoroughly
knowledgeable about each other’s capabilities and expectations to ensure compatibility and
cooperation.
• There can easily be differences in the perception of quality, or the documentation
package can seem inadequate to the PCB manufacturer, thus requiring additional
communication with subsequent adjustments, and inevitably, this takes time.
• Another important advantage of having a number of regular PCB suppliers is a broader
spectrum of PCB technology at the customer’s disposal.
• This can be very significant in times of great technological changes, especially when
introducing SMT, HDI (High Density Interconnect), or laser drilled boards.
Thus, the conclusion is that any OEM or EMS company should always utilize a number of approved
and regular PCB vendors.
Key Take Aways
![Page 60: Printed Circuit Board Manufacturing](https://reader033.vdocument.in/reader033/viewer/2022052620/55a26abc1a28ab3d4a8b464d/html5/thumbnails/60.jpg)
PRIVILEGED AND CONFIDENTIAL MATERIALS
May This Information Improve Your Ability To Weather The Storms