pro series network camera
TRANSCRIPT
EEM012-MFM Specification
[email protected] Copyright © 2013 OPTOLOGICS Co., Ltd. All Rights Reserved
* EEM012-MFM
- Optical 12X ZOOM and manual FOCUS motor control module
EEM012-MFM is a module that controls the zoom and focus motor manually.
With its compact design.
Key Features
● Fast manual Focus with continuous tracking
● Built-in DC Auto Iris with IR cut Filter conversion system
● Control using RS232
● ADC Interface for external control of zoom motor and focus motor
● DC12V
EEM012-MFM Specification
[email protected] Copyright © 2013 OPTOLOGICS Co., Ltd. All Rights Reserved
Specification for Lens
Dimension
3D
Front
Top
EEM012-MFM Specification
[email protected] Copyright © 2013 OPTOLOGICS Co., Ltd. All Rights Reserved
Side 1
Side 2
Back
EEM012-AFM Specification
[email protected] Copyright © 2013 OPTOLOGICS Co., Ltd. All Rights Reserved
* EEM012-AFM
- Optical 12X ZOOM and AUTO FOCUS motor control module
EEM012-AFM is a module that controls the zoom and focus motor automatically.
With its compact design.
Key Features
● Fast auto Focus with continuous tracking
● Built-in DC Auto Iris with IR cut Filter conversion system
● Control using RS232
● ADC Interface for external control of zoom motor and focus motor
● The I2C interface is used to accept and process the Auto Focus data.
● It is the same as hardware EEM012-MFM.
● DC12V
EEM012-AFM Specification
[email protected] Copyright © 2013 OPTOLOGICS Co., Ltd. All Rights Reserved
Specification for Lens
Dimension
3D
Front
Top
EEM012-AFM Specification
[email protected] Copyright © 2013 OPTOLOGICS Co., Ltd. All Rights Reserved
Side 1
Side 2
Back
EEM012-BT1120 Specification
[email protected] Copyright © 2013 OPTOLOGICS Co., Ltd. All Rights Reserved
* EEM012-BT1120
- FULL HD 12xZoom SMART FOCUS BT1120 output format
vision Camera
EEM012-HDSDI is an BT1120 output format vision camera . With its compact design.
Key Features
● Uncompressed high quality FULL HD video with 60 frame rate
● Supported DIS(Digital Image Stablizer)System
● Fast Auto Focus with continuous tracking
● Patented intelligent IR protection technology
● Contrast Enhancement ( Local Exposure ),Adaptive Contrast Enhancer(ACE)
● AWB(Automatic White Balance)
● AE(Automatic Exposure)
● BLC(Back Light Compensation)
● DFC(Defective Pixel Correction) on the fly
● Remote lens control via standard controller (RS232)
● HD video transmission up to 100M
● Sony 1/2.8” IMX-291 CMOS, 2Megapixel
● Up to 1920X1080 30f resolution
● Built-in DC Auto Iris with IR cut Filter conversion system
● Composite video output for instant camera test or for conventional use with SD DVR
● 2D/3D DNR (Digital Noise Reduction),Optical zoom , Digital zoom,Wide Dynamic Range(WDR)
● ADC Interface for external control of OSD (Using controllers, etc. )
● DC12V
EEM012-BT1120 Specification
[email protected] Copyright © 2013 OPTOLOGICS Co., Ltd. All Rights Reserved
Specification for Camera
MODEL EEM012-BT1120
Sensor Device Sony IMX291 1/2.8” progressive scan CMOS, 2Megapixel
Total Pixels 1945(H) x 1109(V) 2.16 Megapixel
Effective Pixels 1945(H) x 1097(V) 2.13 Megapixel
Scanning System Progressive Scan
Horizontal 800TVL
S/N Ratio More than 50dB (AGC Off)
Shutter Speed 1/30s Default,(Long Exposure Mode, ~1Sec)
Video Output 1280 x 720 60F, 1920 x 1080 30F, 1920 x 1080 60P (Mode Select)
AV Output 1V p-p Composite. 75 Ohms
Output Format BT1120 16bit (YUV422)
Day & Night IR CUT Filter Conversion System
Serial Port RS232
Lens Control Motorized Lens Control by stepping Motor. (Simplified Adjustment)
2D/3DNR Off / On (User selectable by OSD)
Power Source DC 12V
OSD Video Mode / D&N / AWB / AE / Flickerless /DIS
Brightness / Sharpness / Mirror & Flip / DSS/DNR, etc.
Ambient Temperature -10ºC ~ 50ºC
Specifications are apt to change without prior notice to enhance quality and performance.
Specification for Lens
MODEL EEM012-HDSDI
Fno F2.2(Wide) ~ F2.3(Tele))
Effective Focal Length F=4.8 ~ 57.6mm (Zoom Ration = 12x)
Focusing Range 10cm(Wide) ~ 1M(Tele)
Field Of View (Degree) Wide : 71.7(D) , 64.2(H) , 37.5(V)
Tele : 6.7(D) , 5.9(H) , 3.3(V)
Relative Illumination More than 50%
EEM012-BT1120 Specification
[email protected] Copyright © 2013 OPTOLOGICS Co., Ltd. All Rights Reserved
Dimension
Dimension 3D
Front
Top
Side 1
Side 2
Bottom
EEM012-HDSDI Specification
[email protected] Copyright © 2013 OPTOLOGICS Co., Ltd. All Rights Reserved
* EEM012-HDSDI
- FULL HD 12xZoom SMART FOCUS HD-SDI vision Camera
EEM012-HDSDI is an HD-SDI vision camera . With its compact design.
Key Features
● Uncompressed high quality FULL HD video with 60 frame rate
● Support Built-in HD-SDI TX(270M/1.485G/2.97G)
● Embedded EX-SDI Encoder (Long Reach, about 500M)
● Supported DIS(Digital Image Stablizer)System
● Fast Auto Focus with continuous tracking
● Patented intelligent IR protection technology
● Contrast Enhancement ( Local Exposure ),Adaptive Contrast Enhancer(ACE)
● AWB(Automatic White Balance)
● AE(Automatic Exposure)
● BLC(Back Light Compensation)
● DFC(Defective Pixel Correction) on the fly
● Remote lens control via standard controller (RS232)
● HD video transmission up to 100M
● Sony 1/2.8” IMX-291 CMOS, 2Megapixel
● Up to 1920X1080 30f resolution
● Built-in DC Auto Iris with IR cut Filter conversion system
● Composite video output for instant camera test or for conventional use with SD DVR
● 2D/3D DNR (Digital Noise Reduction),Optical zoom , Digital zoom,Wide Dynamic Range(WDR)
● ADC Interface for external control of OSD (Using controllers, etc. )
● DC12V
EEM012-HDSDI Specification
[email protected] Copyright © 2013 OPTOLOGICS Co., Ltd. All Rights Reserved
Specification for Camera
MODEL EEM012-HDSDI
Sensor Device Sony 1/2.8” progressive scan CMOS, 2Megapixel
Total Pixels 1945(H) x 1109(V) 2.16 Megapixel
Effective Pixels 1945(H) x 1097(V) 2.13 Megapixel
Scanning System Progressive Scan
Horizontal 800TVL
S/N Ratio More than 50dB (AGC Off)
Shutter Speed 1/30s Default,(Long Exposure Mode, ~1Sec)
Video Output 1280 x 720 60F, 1920 x 1080 30F, 1920 x 1080 60P (Mode Select)
Video Output Format 1.485G/s, HD-SDI Output (SMPTE 292M) ,or EX-SDI
AV Output 1V p-p Composite. 75 Ohms
Digital Output SDI Output
Day & Night IR CUT Filter Conversion System
Serial Port RS232
Lens Control Motorized Lens Control by stepping Motor. (Simplified Adjustment)
2D/3DNR Off / On (User selectable by OSD)
Power Source DC 12V
OSD Video Mode / D&N / AWB / AE / Flickerless /DIS
Brightness / Sharpness / Mirror & Flip / DSS/DNR, etc.
Ambient Temperature -10ºC ~ 50ºC
Specifications are apt to change without prior notice to enhance quality and performance.
Specification for Lens
MODEL EEM012-HDSDI
Fno F2.2(Wide) ~ F2.3(Tele))
Effective Focal Length F=4.8 ~ 57.6mm (Zoom Ration = 12x)
Focusing Range 10cm(Wide) ~ 1M(Tele)
Field Of View (Degree) Wide : 71.7(D) , 64.2(H) , 37.5(V)
Tele : 6.7(D) , 5.9(H) , 3.3(V)
Relative Illumination More than 50%
EEM012-HDSDI Specification
[email protected] Copyright © 2013 OPTOLOGICS Co., Ltd. All Rights Reserved
Dimension
Dimension 3D
Front
Top
Side 1
Side 2
EEM012-HDSDI Specification
[email protected] Copyright © 2013 OPTOLOGICS Co., Ltd. All Rights Reserved
Bottom
EEM012-USB2.0 Specification
[email protected] Copyright © 2013 OPTOLOGICS Co., Ltd. All Rights Reserved
* EEM012-USB2.0
- FULL HD 12xZoom SMART FOCUS USB2.0 vision Camera
EEM012-USB2.0 is an USB2.0 vision camera . With its compact design.
Key Features
● commpressed MJPEG FULL HD video with 30 frame rate
● Supported DIS(Digital Image Stablizer)System
● Fast Auto Focus with continuous tracking
● Patented intelligent IR protection technology
● Contrast Enhancement ( Local Exposure ),Adaptive Contrast Enhancer(ACE)
● AWB(Automatic White Balance)
● AE(Automatic Exposure)
● BLC(Back Light Compensation)
● DFC(Defective Pixel Correction) on the fly
● Remote lens control via standard controller (RS232)
● Sony 1/2.8” IMX-291 CMOS, 2Megapixel
● Up to 1920X1080 30f resolution
● Built-in DC Auto Iris with IR cut Filter conversion system
● Composite video output for instant camera test or for conventional use with SD DVR
● 2D/3D DNR (Digital Noise Reduction),Optical zoom , Digital zoom,Wide Dynamic Range(WDR)
● ADC Interface for external control of OSD (Using controllers, etc. )
● Available USB2.0 (500mA/port) for power specification, but should connect with USB3.0 port
(1A/port) or 2 lines of USB2.0 port at the same time for stable control.
● DC12V
EEM012-USB2.0 Specification
[email protected] Copyright © 2013 OPTOLOGICS Co., Ltd. All Rights Reserved
Specification for Camera
MODEL EEM012-USB2.0
Sensor Device Sony 1/2.8” progressive scan CMOS, 2Megapixel
Total Pixels 1945(H) x 1109(V) 2.16 Megapixel
Effective Pixels 1945(H) x 1097(V) 2.13 Megapixel
Scanning System Progressive Scan
Horizontal 800TVL
S/N Ratio More than 50dB (AGC Off)
Shutter Speed 1/30s Default,(Long Exposure Mode, ~1Sec)
Video Output 1920 x 1080 30F
Video Output Format Compressed MJPEG
AV Output 1V p-p Composite. 75 Ohms
ISP output Format YUV 4:2:2 16bit (BT1120 ,16bit)
USB Chip EM27386D, Not supported UVC, How to control form Windos OS,
directdraw
Operating PC spec Current is over the 700mA, OS : Win7SP1 up, CPU :Core i3 up, RAM: 4GB
up, With stand alone VGA card well be better.
Day & Night IR CUT Filter Conversion System
Serial Port RS232
Lens Control Motorized Lens Control by stepping Motor. (Simplified Adjustment)
2D/3DNR Off / On (User selectable by OSD)
Power Source DC 12V
OSD Video Mode / D&N / AWB / AE / Flickerless /DIS
Brightness / Sharpness / Mirror & Flip / DSS/DNR, etc.
Ambient Temperature -10ºC ~ 50ºC
Specifications are apt to change without prior notice to enhance quality and performance.
EEM012-USB2.0 Specification
[email protected] Copyright © 2013 OPTOLOGICS Co., Ltd. All Rights Reserved
Specification for Lens
MODEL EEL005
Fno F2.2(Wide) ~ F2.3(Tele))
Effective Focal Length F=4.8 ~ 57.6mm (Zoom Ration = 12x)
Focusing Range 10cm ~ ∞ (Wide) , 1M ~ ∞ (Tele)
Field Of View (Degree) Wide : 71.7(D) , 64.2(H) , 37.5(V)
Tele : 6.7(D) , 5.9(H) , 3.3(V)
Relative Illumination More than 50%
EEM012-USB2.0 Specification
[email protected] Copyright © 2013 OPTOLOGICS Co., Ltd. All Rights Reserved
Dimension
Dimension 3D
Front
Top
Side 1
Side 2
Bottom
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 1
CL0201F 12xZoom Lens Specification
CL0201F
12xZoom Lens Specification
http://www.optologics.com
572-5 Anyang-dong Manan-gu Anyang-city Gyeonggi-do Korea
Release Checked Approval
Version: CL0201F Ver1.0
Date : 09 . August . 2011
Product Name
Model Name CL0201F
Product Code
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 2
CL0201F 12xZoom Lens Specification
1. Revision Histories ------------------------------------------------------------ 3
2. Product Outline -------------------------------------------------------------- 4
3. Performance ------------------------------------------------------------------ 5
4. Reliability Test --------------------------------------------------------------- 18
5. Outline Dimension ---------------------------------------------------------- 22
6. Locus Table ------------------------------------------------------------------ 23
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 3
CL0201F 12xZoom Lens Specification
1.Revision Histories
Date Revision Description Initiator
2011.08. 09. 1.0 First Release C.S. Jung
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 4
CL0201F 12xZoom Lens Specification
2. Product Outline
2-1. Coverage
These specifications specify the delivery specification of 12xZoom Lens
Unit (CL0201F) supplied by OPTOLOGICS Co., Ltd.
- CL0201F is for auto focus function of 1/3 inch CMOS color video camera.
- CL0201F contains auto iris with IR cut filter.
2-2. Change in specification
Customer and OPTOLOGICS Co.,Ltd. contact promptly the other party side.
As the both parties come true conference agreement, execute the revision
specification when the necessity of the specification change is caused.
Moreover, when a problem arises under the matter which is not defined
as these specification, it talks and acts over sincerity each other prudently.
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 5
CL0201F 12xZoom Lens Specification
3. Performance
3.1 General Specification
No Items Description
1 Sensor 1/3 inch CMOS & CCD
2 Sensor Image Circle Sensor Effective Image Circle : Ф6.0 mm
3 Focal Length 5.2~58.8 ±8% (Zoom Ratio : 12)
4 Aperture Ф7.2 mm
5 Focus Range 20cm (Wide) ~ 1m (Tele)
6 Fno F/1.6 ~ F/3.0(Object distance: infinity)
7 Relative Illumination Wide : >50% , Tele : >43%
8 TV Distortion Wide : -3.0% , Tele : +0.3%
9 Optical Total Track 68.42 mm (in air)
10 Flange Back Length -0.31mm
11 Field Of View
Diagonal: 64.1°(Wide) ~ 5.8° (Tele)
Horizontal: 51.3°(Wide) ~ 4.64° (Tele)
Vertical: 38.5°(Wide) ~ 3.48° (Tele)
12 IR Cut Filter Driving by IR cut filter actuator
13 Barrel Size Ф36.0 x L68.73(TTL)
3.2 Test Conditions
Without any special explanation, please conduct testing under the
following conditions.
1) Temperature & humidity
Temperature : 20±5° Humidity:50±5%(relative humidity)
2) Driving Voltage : 4.5 ~ 5V (with Power Supply)
3) Visual confirmation
In the natural light or daylight within the range of 750~1500 lx,
please make visual confirmation in the distance of 25~30cm.
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 6
CL0201F 12xZoom Lens Specification
3.3 Appearance
3.3.1 General Appearance
1) Any clear stain, dirt, sweat mark, flow mark, gap are not allowed to
show in the appearance of lens completion.
2) Any clear scar caused by flash or burr are not allowed to appear in the
revealing parts of lens completion products.
3) Any breakage & adherent particles are not allowed.
4) Appearance limit sample can be produced in accord with requirements.
3.3.2 Step/Gap
1) Step:below 0.2mm Gap:below 0.2mm
2) Limit sample can be produced in accord with requirements.
3.3.3 Assembly
1) It should not be allowed neglected and mistaken assembly ,
exceptional looseness , abnormal sounds in vibrating the lens
2) Limit sample can be produced in accord with requirements.
3.3.4 Lens Appearance
1) It should not be allowed apparent fingerprint, dirt, clear split, scratch
2) It should not be allowed dirt that would cause damage to images
3) It should not be allowed lens tilting, dropping etc.
4) Limit sample can be produced in accord with requirements.
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 7
CL0201F 12xZoom Lens Specification
3.4 Optical Performance
1) Focal Length
Wide:5.2±8%mm Tele:58.8±8%mm
2) Fno.
Wide:1.6±8%mm Tele:3.0±8%mm
3) Back Focal Length
Wide = 9mm , Tele =6.9mm (In Air)
4) Flange Back Length : -0.31mm
5) Focus Length
Wide : 0.2m~INF (From the 1st surface of G1 lens)
Tele : 1.0m~INF (From the 1st surface of G1 lens)
6) Lens Composition : 4Groups 10Elements
7) Injection Position
Wide : -19.97 , Tele : -23.5
8) Rear Projection Resolution
* Measurement condition
Wide : Object distance -- 1m , Aperture : Fno 1.6
Tele : Object distance –- 4 m , Aperture : Fno 3.0.
* Measurement method:Focus is adjusted to get the greatest contrast on
the center point.
* Specification
Wide Tele
On Axis 200lp/mm 160lp/mm
0.7F 125lp/mm 125lp/mm
9) Distortion
* Wide : less than ± 3.0% (at 1.0m) , Tele : less than ± 1.0% (at 3.0m)
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 8
CL0201F 12xZoom Lens Specification
* Measurement on the projection screen is as follow
10) Relative Illumination Ratio
When the condition with fully opened iris & focus adjusting, assumed
that on axis illumination is 100%, illumination of image corner for 3.0mm
(1.0F) apart from axis shall satisfy the below value in the table.
Zoom Position Illumination Ratio @ 1.0F
Wide More than 50 %
Tele More than 43 %
11) Spectral Transmission
Day Mode Night Mode
Wave Length 440㎚ 550㎚ 650㎚ 850㎚
Transmission Over 65% Over 85% Over 80% Over 45%
DISTH
H
100(%)
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 9
CL0201F 12xZoom Lens Specification
12) Flare, Ghost
The limited sample would be established at need.
13) Dust Inspection
a) Inspection Condition
The lens module would be inspected with human eye under the light
box at Wide and full opened iris after cleaning on the surface of
1st & last lens.
b) The limited sample would be established at need.
14) Punt Adjustment
The detailed punt is measured by collimator at Wide, Tele.
The punt condition is the infinite object position.
15) Optical Image Circle
- more than Φ6.4mm (designed value)
16) Internal Reflection
The limited sample would be established at need.
17) Focal Position
[Adjusting condition]
▣ The focal position variation shall be within ±0.85mm
including the tolerance of sensor position and Cover Glass thickness.
※ Sensor & Dummy Glass Punt tolerance = ±0.05
※ Lens Punt adjusting tolerance = ±0.80
18) Eccentricity of Image center
There is no problem in practical use for the eccentricity of image center.
※ within 5.0% of diagonal size of Sensor image (Φ6.0)
(The center position will be decided at Tele, and verify at Wide)
19) Image Shaking
1) There is no problem in practical use for the image shaking during
zooming & focusing.
2) The limited sample would be established at need.
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 10
CL0201F 12xZoom Lens Specification
3.5 Zoom Tracking
1) Zoom tracking is working with direction of Close → Wide → Tele.
2) The Close position is defined as the stopping position after (+10) pulse
count of Zoom motor ,(+10) pulse count of AF motor after P.I
signal changing detection.
This value would be adjustable in E2PROM.
3) The Wide position is defined as the stopping (sudden stop) position of
(-1098) pulse count of Zoom motor , (-85) pulse count of AF motor after
Photo-Interrupter signal changing detection.
4) The Tele position is defined as the stopping position of (+80) pulse count
of Zoom motor , (+117) pulse count of AF motor after Photo-Interrupter
signal changing detection.
5) The Wide ↔ Tele position is defined as the zoom & AF lens position
according to count of Zoom & AF motor pulse.
6) Pulse Diagram
** Zoom Pulse Diagram
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 11
CL0201F 12xZoom Lens Specification
** AF Pulse Diagram
3.6 Mechanical / Electrical Specifications
3.6.1 Zoom & Focus Motor
1) Drive the 2 & 4 group lenses through driving of the stepping
motor lead screw.
2) Motor Specification
① Motor Type : PM type Stepping motor , Φ10 & M2xP0.4
② Excitation system : 2phase excitation bipolar
③ Basic step angle : 18°/1pulse ( 20pulse/ 1rev → 2 phase excitation)
④ Coil resistance : 55Ω/phase ± 10%
⑤ Working voltage range : 4.5V ~ 5.0V
⑥ Unit movement
Zoom Motor = 0.02mm/pulse (2-2 phase excitation)
Focus Motor = 0.01mm/pulse (1-2 phase excitation)
3) Motor driving condition
① Rated voltage : 5V ± 0.2V (Terminal Voltage)
② Driving system
Zoom Motor : 2-2 Phase Driving , AF Motor : 1-2 Phase Driving
③ Driving PPS range : 400 ~ 700 PPS
4) Moving accuracy (Horizontal)
- In case of N step moving in any focus range with (400 ~ 700) PPS,
the actual moving amount X shall satisfy the below equation.
Zoom Motor : X = 0.02 × N ± 0.04mm (±2 pulse)
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 12
CL0201F 12xZoom Lens Specification
Focus Motor : X = 0.01 × N ± 0.02mm (±2 pulse)
5) Driving error frequency
- There is no driving error with (400 ~ 700) PPS operating in the condition
of motor terminal voltage 5V ± 0.2V including temperature condition.
3.6.2 IR Cut Filter Driving System
IR-Cut Filter : Thickness of material t=0.1mm;
Drive coil : 240Ω±10% at 20℃
IR Filter InOut : 3.5V/20℃ , IR Filter OutIn : -3.5V/20℃
3.6.3 Auto IRIS Driving System
1) Composition :2 blades aperture , Φ10.0mm galvanometer
2) Operating : The aperture is controlled by output signal of hall element
with damping coil. (The iris shall be closed when there is no signal).
3) Electrical characteristic
Drive Coil Resistance : 190Ω±10%, 20℃
Damping Coil Resistance : 465Ω±10% , 20℃
4) Open/Close
It shall be opened at Max. 3.5V and closed at Min. 0.5V in all position
and under high/low temperature. When positive voltage is applied to
the positive pole of the drive, the aperture shifts to the open position.
5) ND filter (nd=1.2) : Transmittance is 6.3%.
6) Hall element type: HG-166A (ASAHI-KASEI)
7) Max Input Voltage : 4.0V
8) Output Specification of hall element
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 13
CL0201F 12xZoom Lens Specification
3.6.4 Design value of hall element output (TBD)
Fno Hall output (Without ND filter)
Wide Tele
Diameter
(mm)
Aperture
area(mm2)
Hall out
(mV)
Diameter
(mm)
Aperture
area (mm2)
Hall out
(mV)
Mech-open
Optical open
F1.6
F2.0
F2.4
F2.8
F3.0
F3.8.
F4.8
F5.6
F6.8
F8.0
F9.6
F11.0
F14.0
F16.0
F19.0
F22.0
F28.0
Optical close
Mech-close
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 14
CL0201F 12xZoom Lens Specification
3.6.5 Zoom & Auto Focus Photo-Interrupter Signal Specification
- Maker : Sharp GP1S093HCZ0F
3.6.6 Zoom & Auto Focus Motor Terminal Order
(Zoom Motor : 2-2 Phase Driving)
Rotational direction of STM (CW - CCW)
Pin 1 2 3 4
B H H L L
B- L L H H
A- L H H L
A H L L H
(Focus Motor : 1-2 Phase Driving)
Rotational direction of STM (CW - CCW)
Pin 1 2 3 4 5 6 7 8
B L H H H L L L L
B- L L L L L H H H
A- L L L H H H L L
A H H L L L L L H
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 15
CL0201F 12xZoom Lens Specification
3.6.7 Zoom & Focus Working Noise
As a rule, the test should be carried out on the packaged unit.
There is under 35 dB in the below condition.
- Distance : 100㎜ from Camera
- Background Noise : 20 dB
※ There is no problem in practical use with Movie Mode.
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 16
CL0201F 12xZoom Lens Specification
3.6.8 FPCB Connecting Wire
1) Type : 0.5mm Pitch FPC Connector (26 Pin)
2) FPCB Pin Assignment
Pin Description Poles
1 STM A+
Focus Motor 2 STM B-
3 STM A-
4 STM B+
5 IR Cut +(OUT) IR Cut Filter Actuator
6 IR Cut -(IN)
7 Anode
Focus Photo Interrupter 8 Collector
9 Collector
10 GND (Common)
11 Damp (+)
IRIS
12 Damp (-)
13 Drive (-)
14 Hall In(+)
15 Hall Out(+)
16 Hall In (-)
17 Hall Out(-)
18 Drive (+)
19 Anode
Zoom Photo Interrupter 20 Collector
21 Collector
22 GND (Common)
23 STM B+
Zoom Motor 24 STM A-
25 STM B-
26 STM A+
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 17
CL0201F 12xZoom Lens Specification
3) Terminal Specification
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 18
CL0201F 12xZoom Lens Specification
4. Reliability Test
4-1. All Sorts of Test
- Testing with various samples of exclusive use.
4-2. Initial Performance Test
- Testing at room temperature, normal humidity (20℃±5℃, 50%±5%)
4-3. Operating Climatic Test
1) Accuracy guaranteed range : -5℃ ~ +40℃, humidity 80%
2) Operating guaranteed range : -20℃ ~ +50℃, humidity 50%
4-4. High Temperature, High Humidity Storage
- There is no problem in practical use at the validation in the below
condition with packaged unit.
: Storage 8H at room temperature
after 48H storage with Temperature : +40℃, Humidity : 80%
4-5. Storage Temperature Test
- There is no problem in practical use at the validation in the below
condition with packaged unit.
1) Hot
: Storage 8H at room temperature
after 24H storage with Temperature +50℃, Humidity 50%
2) Cold
: Storage 8H at room temperature
after 24H storage with Temperature -20℃, Humidity 0%
4-6. Storage Low Humidity Test
- There is no problem in practical use at the validation in the below
condition with packaged unit.
: Storage 8H at room temperature
after 24H storage with Temperature : +20℃, Humidity : 10%
4-7. Temperature Cyclic Test
- There is no problem in practical use with storage of 8H at room
temperature after 2cycles with the below diagram.
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 19
CL0201F 12xZoom Lens Specification
4-8. Package Drop Test
When the test should be carried out on the packaged unit,
there is no problem in practical use in the below condition.
- Drop on the veneer board from 50cm height.
- Direction : 6 surfaces (each 2 time, total 12 times)
4-9. Vibration Test
When the test should be carried out on the packaged unit,
there is no problem in practical use in the below condition.
- Sweeping Frequency : 10 ~ 25Hz
- Period : 2 minutes
- Amplitude : 1.0 mm
- Direction : X,Y,Z 3 directions (each 1 time, total 3times)
- Test Time : 20 minutes for each direction
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 20
CL0201F 12xZoom Lens Specification
4-10. Endurance Testing
1) Zoom motor (Stepping motor)
- More than 100,000 cycle at room temperature.
2) Focus motor (Stepping motor)
- More than 100,000 cycle at room temperature.
3) IR Cut Filter
- IRCF operation cycle: Min. 100,000 cycles
Operation condition :
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 21
CL0201F 12xZoom Lens Specification
4) Auto IRIS
- Auto Iris operation cycle: Min. 300,000 cycles
Operation condition:
4-11. Secular Changing
- There is no remarkable deterioration with performance in a secular
changing of normal use and normal storage.
4-12. Electrostatic Destruction Test
- Consider a counterplan with an additional deliberation when becoming
an issue.
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 22
CL0201F 12xZoom Lens Specification
5. Outline Dimension
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 23
CL0201F 12xZoom Lens Specification
6. Locus Table
* Driving Condition
: Zoom Motor --- 2-2 Phase driving , Unit Step : 0.02mm
: Focus Motor --- 1-2 Phase driving , Unit Step : 0.01mm
No Zoom
Position EFFL
Iris
Size
Zoom Step
Count
focus step number
∞ 10m 5m 3m 1.5m 1m
0 M-Stop -1110 -495
1 1X 5.30
7.20
-1098 -85 -85 -86 -87 -87 -88
2 5.48 -1092 -87 -87 -88 -88 -89 -90
3 5.52 -1086 -89 -89 -90 -90 -91 -92
4 5.56 -1080 -91 -91 -92 -92 -93 -94
5 5.60 -1074 -93 -94 -94 -94 -95 -96
6 5.64 -1068 -95 -96 -96 -96 -97 -98
7 5.69 -1063 -97 -98 -98 -98 -99 -100
8 5.73 -1057 -99 -100 -100 -100 -101 -102
9 5.78 -1051 -101 -102 -102 -102 -104 -105
10 5.82 -1045 -103 -104 -104 -105 -106 -107
11 5.87 -1039 -105 -106 -106 -107 -108 -109
12 5.92 -1033 -108 -108 -108 -109 -110 -111
13 5.97 -1027 -110 -110 -110 -111 -112 -113
14 6.02 -1021 -112 -112 -112 -113 -114 -115
15 6.07 -1015 -114 -114 -115 -115 -116 -117
16 6.12 -1009 -116 -116 -117 -117 -118 -120
17 6.17 -1004 -118 -118 -119 -119 -121 -122
18 6.23 -998 -120 -121 -121 -121 -123 -124
19 6.28 -992 -122 -123 -123 -124 -125 -126
20 6.33 -986 -124 -125 -125 -126 -127 -128
21 6.39 -980 -127 -127 -127 -128 -129 -131
22 6.44 -974 -129 -129 -130 -130 -131 -133
23 6.50 -968 -131 -131 -132 -132 -134 -135
24 6.55 -962 -133 -134 -134 -135 -136 -137
25 6.61 -956 -135 -136 -136 -137 -138 -139
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 24
CL0201F 12xZoom Lens Specification
No Zoom
Position EFFL
7.20
Zoom Step
Count
focus step number
∞ 10m 5m 3m 1.5m 1m
26 6.67 -951 -138 -138 -138 -139 -140 -142
27 6.73 -945 -140 -140 -141 -141 -143 -144
28 6.79 -939 -142 -142 -143 -143 -145 -146
29 6.85 -933 -144 -145 -145 -146 -147 -149
30 6.91 -927 -146 -147 -147 -148 -149 -151
31 6.97 -921 -149 -149 -150 -150 -152 -153
32 7.03 -915 -151 -151 -152 -152 -154 -155
33 7.09 -909 -153 -154 -154 -155 -156 -158
34 7.15 -903 -155 -156 -156 -157 -159 -160
35 7.21 -898 -158 -158 -159 -159 -161 -163
36 7.28 -892 -160 -160 -161 -162 -163 -165
37 7.34 -886 -162 -163 -163 -164 -166 -167
38 7.41 -880 -164 -165 -166 -166 -168 -170
39 7.47 -874 -167 -167 -168 -169 -170 -172
40 7.54 -868 -169 -170 -170 -171 -173 -174
41 7.60 -862 -171 -172 -172 -173 -175 -177
42 7.67 -856 -174 -174 -175 -176 -177 -179
43 7.74 -850 -176 -177 -177 -178 -180 -182
44 7.80 -845 -178 -179 -180 -180 -182 -184
45 7.87 -839 -181 -181 -182 -183 -185 -187
46 7.94 -833 -183 -184 -184 -185 -187 -189
47 8.01 -827 -185 -186 -187 -187 -189 -191
48 8.08 -821 -188 -188 -189 -190 -192 -194
49 8.15 -815 -190 -191 -191 -192 -194 -196
50 8.22 -809 -193 -193 -194 -195 -197 -199
51 8.30 -803 -195 -196 -196 -197 -199 -201
52 8.37 -797 -197 -198 -199 -200 -202 -204
53 8.44 -792 -200 -200 -201 -202 -204 -206
54 8.52 -786 -202 -203 -204 -205 -207 -209
55 8.59 -780 -205 -205 -206 -207 -209 -212
56 8.67 -774 -207 -208 -209 -209 -212 -214
57 8.74 -768 -210 -210 -211 -212 -214 -217
58 8.82 -762 -212 -213 -213 -214 -217 -219
59 8.90 -756 -214 -215 -216 -217 -219 -222
60 8.98 -750 -217 -218 -218 -219 -222 -224
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 25
CL0201F 12xZoom Lens Specification
No Zoom
Position EFFL
7.20
Zoom Step
Count
focus Step Number
∞ 10m 5m 3m 1.5m 1m
61 9.06 -744 -219 -220 -221 -222 -225 -227
62 9.14 -738 -222 -223 -223 -224 -227 -230
63 9.22 -733 -224 -225 -226 -227 -230 -232
64 9.31 -727 -227 -228 -228 -230 -232 -235
65 9.39 -721 -229 -230 -231 -232 -235 -238
66 9.48 -715 -232 -233 -234 -235 -237 -240
67 9.56 -709 -234 -235 -236 -237 -240 -243
68 9.65 -703 -237 -238 -239 -240 -243 -246
69 9.74 -697 -239 -240 -241 -242 -245 -248
70 9.83 -691 -242 -243 -244 -245 -248 -251
71 9.92 -685 -244 -245 -246 -248 -251 -254
72 2X 10.01 -680 -247 -248 -249 -250 -253 -256
73 10.11 -674 -249 -250 -251 -253 -256 -259
74 10.20 -668 -252 -253 -254 -255 -259 -262
75 10.30 -662 -254 -256 -257 -258 -261 -265
76 10.40 -656 -257 -258 -259 -261 -264 -267
77 10.50 -650 -260 -261 -262 -263 -267 -270
78 10.60 -644 -262 -263 -264 -266 -269 -273
79 10.70 -638 -265 -266 -267 -268 -272 -276
80 10.81 -632 -267 -268 -270 -271 -275 -278
81 10.91 -627 -270 -271 -272 -274 -277 -281
82 11.02 -621 -272 -274 -275 -276 -280 -284
83 11.13 -615 -275 -276 -277 -279 -283 -287
84 11.24 -609 -278 -279 -280 -282 -286 -290
85 11.35 -603 -280 -281 -283 -284 -288 -292
86 11.47 -597 -283 -284 -285 -287 -291 -295
87 11.59 -591 -285 -287 -288 -290 -294 -298
88 11.70 -585 -288 -289 -290 -292 -297 -301
89 11.83 -579 -290 -292 -293 -295 -299 -304
90 11.95 -574 -293 -294 -296 -298 -302 -307
91 12.08 -568 -295 -297 -298 -300 -305 -309
92 12.20 -562 -298 -299 -301 -303 -308 -312
93 12.33 -556 -301 -302 -304 -306 -310 -315
94 12.47 -550 -303 -305 -306 -308 -313 -318
95 12.60 -544 -306 -307 -309 -311 -316 -321
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 26
CL0201F 12xZoom Lens Specification
No Zoom
Position EFFL
Iris
Size
Zoom Step
Count
focus Step Number
∞ 10m 5m 3m 1.5m 1m
96 12.74
7.20
-538 -308 -310 -311 -314 -319 -324
97 12.88 -532 -311 -312 -314 -316 -322 -327
98 13.02 -526 -313 -315 -317 -319 -324 -330
99 13.17 -520 -316 -317 -319 -321 -327 -332
100 13.32 -515 -318 -320 -322 -324 -330 -335
101 13.47 -509 -321 -323 -324 -327 -333 -338
102 13.62 -503 -323 -325 -327 -329 -335 -341
103 13.78 -497 -326 -328 -330 -332 -338 -344
104 13.94 -491 -328 -330 -332 -335 -341 -347
105 14.10 -485 -331 -333 -335 -337 -344 -350
106 14.27 -479 -333 -335 -337 -340 -346 -353
107 14.44 -473 -335 -338 -340 -342 -349 -355
108 14.61 -467 -338 -340 -342 -345 -352 -358
109 14.79 -462 -340 -342 -345 -347 -354 -361
110 3X 14.97
6.60
-456 -343 -345 -347 -350 -357 -364
111 15.16 -450 -345 -347 -350 -353 -360 -367
112 15.34 -444 -347 -350 -352 -355 -363 -370
113 15.54 -438 -350 -352 -354 -358 -365 -373
114 15.73 -432 -352 -354 -357 -360 -368 -375
115 15.93 -426 -354 -357 -359 -362 -371 -378
116 16.13 -420 -356 -359 -361 -365 -373 -381
117 16.34 -414 -358 -361 -364 -367 -376 -384
118 16.55 -409 -361 -363 -366 -370 -378 -387
119 16.77 -403 -363 -365 -368 -372 -381 -389
120 16.99 -397 -365 -368 -371 -374 -383 -392
121 17.22 -391 -367 -370 -373 -377 -386 -395
122 17.45 -385 -369 -372 -375 -379 -388 -398
123 17.68 -379 -371 -374 -377 -381 -391 -400
124 17.92 -373 -373 -376 -379 -383 -393 -403
125 18.16 -367 -374 -378 -381 -385 -396 -406
126 18.41 -361 -376 -380 -383 -387 -398 -408
127 18.66 -356 -378 -382 -385 -389 -400 -411
128 18.92 -350 -380 -383 -387 -391 -403 -413
129 19.19 -344 -381 -385 -389 -393 -405 -416
130 19.46 -338 -383 -387 -390 -395 -407 -418
131 19.73 -332 -384 -388 -392 -397 -409 -421
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 27
CL0201F 12xZoom Lens Specification
No Zoom
Position EFFL
Iris
Size
Zoom Step
Count
focus Step Number
∞ 10m 5m 3m 1.5m 1m
132 4X 20.01
6.20
-326 -386 -390 -394 -399 -411 -423
133 20.30 -320 -387 -391 -395 -401 -413 -426
134 20.59 -314 -389 -393 -397 -402 -415 -428
135 20.89 -308 -390 -394 -398 -404 -417 -430
136 21.19 -303 -391 -395 -400 -405 -419 -433
137 21.50 -297 -392 -397 -401 -407 -421 -435
138 21.82 -291 -393 -398 -402 -408 -423 -437
139 22.14 -285 -394 -399 -403 -410 -425 -439
140 22.47 -279 -395 -400 -404 -411 -426 -441
141 22.81 -273 -395 -400 -405 -412 -428 -443
142 23.15 -267 -396 -401 -406 -413 -429 -445
143 23.50 -261 -396 -402 -407 -414 -431 -447
144 23.85 -255 -397 -402 -408 -415 -432 -448
145 24.21 -249 -397 -402 -408 -415 -433 -450
146 24.58 -244 -397 -403 -408 -416 -434 -452
147 5X 24.96
5.80
-238 -397 -403 -409 -416 -435 -453
148 25.34 -232 -397 -403 -409 -417 -436 -454
149 25.74 -226 -396 -403 -409 -417 -437 -456
150 26.13 -220 -396 -402 -409 -417 -437 -457
151 26.54 -214 -395 -402 -408 -417 -438 -458
152 26.96 -208 -394 -401 -408 -417 -438 -459
153 27.38 -202 -393 -400 -407 -416 -439 -460
154 27.81 -196 -392 -399 -407 -416 -439 -461
155 28.25 -191 -391 -398 -406 -415 -439 -461
156 28.69 -185 -389 -397 -404 -414 -439 -462
157 29.15 -179 -387 -395 -403 -413 -438 -462
158 29.61 -173 -385 -393 -402 -412 -438 -462
159 6X 30.09
5.40
-167 -383 -391 -400 -411 -437 -462
160 30.57 -161 -380 -389 -398 -409 -436 -462
161 31.06 -155 -378 -387 -396 -407 -435 -462
162 31.56 -149 -375 -384 -393 -405 -434 -461
163 32.07 -143 -371 -381 -391 -403 -433 -461
164 32.59 -138 -368 -378 -388 -400 -431 -460
165 33.11 -132 -364 -374 -384 -398 -429 -459
Copyright © 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 28
CL0201F 12xZoom Lens Specification
No Zoom
Position EFFL
Iris
Size
Zoom Step
Count
focus Step Number
∞ 10m 5m 3m 1.5m 1m
166 33.65
5.40
-126 -360 -371 -381 -394 -427 -458
167 34.20 -120 -356 -367 -377 -391 -425 -456
168 7X 34.75 -114 -351 -362 -373 -388 -422 -455
169 35.32 -108 -346 -358 -369 -384 -419 -453
170 35.90 -102 -341 -353 -364 -379 -416 -450
171 36.49 -96 -335 -347 -359 -375 -413 -448
172 37.09 -90 -329 -341 -354 -370 -409 -445
173 37.69 -85 -322 -335 -348 -365 -405 -442
174 38.31 -79 -315 -329 -342 -359 -400 -439
175 38.94 -73 -308 -322 -336 -353 -396 -436
176 39.59 -67 -300 -315 -329 -347 -391 -432
177 8X 40.24
5.00
-61 -292 -307 -322 -340 -385 -428
178 40.90 -55 -284 -299 -314 -333 -380 -423
179 41.58 -49 -275 -290 -306 -326 -374 -419
180 42.27 -43 -265 -281 -297 -318 -367 -413
181 42.97 -37 -255 -272 -288 -309 -360 -408
182 43.68 -32 -244 -262 -279 -301 -353 -402
183 44.40 -26 -233 -251 -268 -291 -345 -396
184 9X 45.14 -20 -221 -240 -258 -281 -337 -389
185 45.88 -14 -209 -228 -247 -271 -328 -382
186 46.64 -8 -195 -215 -235 -260 -319 -375
187 47.42 -2 -181 -202 -222 -248 -310 -367
188 48.21 4 -167 -188 -209 -236 -299 -358
189 49.00 10 -152 -174 -195 -223 -289 -349
190 10X 49.82
4.60
16 -135 -158 -181 -210 -277 -340
191 50.64 22 -118 -142 -166 -196 -266 -330
192 51.48 27 -100 -125 -150 -181 -253 -320
193 52.34 33 -81 -108 -133 -165 -240 -309
194 53.21 39 -61 -89 -115 -148 -226 -297
195 54.09 45 -40 -69 -96 -131 -212 -285
196 11X 54.98
4.20
51 -18 -48 -76 -113 -196 -272
197 55.89 57 6 -26 -55 -93 -180 -259
198 56.82 63 31 -2 -33 -73 -163 -245
199 57.76 69 57 23 -10 -52 -146 -230
200 58.71 75 86 51 15 -29 -127 -214
201 12X 58.80 80 117 72 41 -5 -108 -198
202 M-Stop 106 206
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
1 / 26
APPROVAL SHEET
Product Name CCTV 12x Zoom Lens
Model Name EEL005D
Customer
APPROVAL
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
2 / 26
1. Revision Histories ------------ 3
2. Product Specification ------------ 4 ~ 15
3. Pin Description ------------ 16 ~ 18
4. Outline Dimensions ------------ 19 ~ 20
5. Reliability Test Specification ------------ 21 ~ 25
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
3 / 26
[Revision Histories]
Date Revision Description Initiator
2011. 09. 28 1.0 First Release CS. Jung
2011. 12. 20 2.0 Revision(Page 4,5,6,7,8,9,19) SH. Lee
2012. 07. 25 2.1 Revision (Page 11, 12 ,21) SH. Lee
2012. 11. 13 3.0 Revision (Page 16, 17 ,18, 19) SH. Lee
2013. 01. 29 4.0 Revision (Page 17) SH. Lee
2013. 02. 26 5.0 Revision (Page 4) SH. Lee
2014. 03. 25 6.0 ICF Motor has changed to DC Motor
Revision (Page 14, Page 17) SH. Lee
2014. 12. 11 7.0 PI Sensor has changed to Sharp from
Kodenshi (Page 10) SH. Lee
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
4 / 26
1. Preface
This document is for 12x Zoom Lens Module using on 1/2.7" Image Sensor.
* Image Sensor
- Omnivision OV2715 : 1/2.7”, 2.0Mega CMOS Sensor
1920(H) * 1080(V) , 5.76mm(H)* 3.24mm(V), Pixel Size : 3um.
2. General Specification
2-1. Taking Lens specification (Nominal value)
1) F-number : 2.2 (Wide) ~ 2.3 (Tele)
2) Effective Focal Length : f = 4.8 ~ 57.6mm (Zoom ratio 12x)
3) Back Focal Length : 9.45mm (Wide,in air),10.3mm( Tele, in air)
4) Image Plane Position
* OV2715 : -0.31mm (OLPF t=0.7mm + Cover Glass t=0.445mm)
* IMX036 : -0.90mm (OLPF t=0.7mm + Cover Glass t=0.70mm)
5) Focusing Range : Wide 10cm ~ ∞ , Tele 100cm ~ ∞ (from 1st Lens R1)
6) Field of View (unit : deg)
Wide Tele
Vertical 37.5 3.3
Horizontal 64.2 5.9
Diagonal 71.7 6.7
7) Lens composition : 9 groups 11 elements (including 2 glass aspheric lenses)
8) Zoom Driving : Stepping Motor (Moving 2nd Group & 4th Group)
9) Focus Driving : Stepping Motor (Moving 4th Group)
10) Iris System : Auto Iris (Driven by Servo motor)
Including ND filter @small iris
11) IR Cut Filter : Stepping Motor (On/Off type)
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
5 / 26
2-2. Taking Lens Auto Focusing (AF) Mechanism
1) AF Method : TV-AF
2) AF Working Range : Infinity ~ MOD ( Minimum Object distance)
3. Performance
3-1. F-no
F-no shall be within below range at Wide with fully opened iris, focus adjusting.
Wide : 2.09 < Fno < 2.31 (±5% equivalent)
Tele : 2.18 < Fno < 2.42 (±5% equivalent)
※ Designed value is Wide : 2.3 , Tele : 2.35
3-2. Focal Length
Focal length shall be within below range at Wide, Tele with focus adjusting.
fW = 4.6 ± (0.23) mm (5%)
fT = 55.2 ± (2.76) mm (5%)
※ Designed value is Wide : 4.9 , Tele : 55.7
※ Zoom magnification shall be within range of 12x ±5%
3-3. Focal Position
[Adjusting condition]
The focal position variation shall be within ±0.65mm
including the tolerance of sensor position and IR-Filter or OLPF position.
※ Sensor & IRF or OLPF Punt tolerance = ±0.05
※ Lens Punt adjusting tolerance = ±0.60
3-4. Eccentricity of Image center
There is no problem in practical use for the eccentricity of image center.
※ within 5.0% of diagonal size Φ 6.6 of Optical Effective Image Circle.
(The center position will be decided at Tele, and verify at Wide)
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
6 / 26
3-5. Image Shaking
1) There is no problem in practical use for the image shaking during Zooming
2) There is no problem in practical use for the image shaking during Focusing
3) The limited sample would be established at need.
3-6. Relative Illumination Ratio
When the condition with fully opened iris, with focus adjusting, assumed that
axis illumination is 100%, illumination of image corner for 2.64mm(0.8F)
apart from axis shall satisfy the below value in the table.
Zoom Position Illumination Ratio
0.6F 0.8F
Wide More than 70% More than 50%
Tele More than 70% More than 50%
3-7. MTF-Resolution
When the condition with fully opened iris, with focus adjusting
by operating focus motor so as to maximize the contrast for on-axis.
▣ Measurement distance is 1.0m (Wide), 5.0m (Tele): from screen to lens module (G1R1)
Resolution
Wide Tele
On – Axis 200 lps/mm 160 lps/mm
0.7 Field 125 lps/mm 100 lps/mm
※ There is no problem in practical use in all the zoom position.
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
7 / 26
3-8. Distortion
1) Wide : less than ± 2.5% at 1.0m , Tele : less than ± 1.0% at 5.0m
2) Measurement on the projection screen is as follow
3-9. Minimum Optical Effective Image Circle
Minimum optical image size : Φ 6.8 (designed value)
3-10. Internal Reflection
The limited sample would be established at need
3-11. Flare, Ghost
The limited sample would be established at need.
ΔH
H
DISTH
H
100(%)
DISTB C A
A
( ) /(%)
2
2100
A
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
8 / 26
3-12. Spectral Transmission
Wave Length 440㎚ 550㎚ 650㎚ 850㎚
Transmission Over 71% Over 76% Over 75% Over 60%
3-13. Dust Inspection
1) Inspection Condition
The lens module would be inspected with human eye under the light box
at Wide and full opened iris after cleaning on the surface of 1st and last lenses.
2) Criterion for judging : The limited sample would be established at need.
3-14. Punt Adjustment
The detailed punt is measured by collimator at Wide (± mm), Tele.(± mm),
The punt condition is the infinite object position (Final product standard).
3-15. Zoom Tracking Method
1) Zoom tracking is working with direction of Close → Wide → Tele
2) The Close position is defined as the stopping position after (-50) pulse count of
Zoom motor , (-20) pulse count of AF motor after Photo-Interrupter signal changing
detection.
This value would be adjustable in E2PROM.
3) The Wide position is defined as the stopping (sudden stop) position of (+53)
pulse count of Zoom motor, (+348) pulse count of AF motor after Photo-Interrupter
signal changing detection.
4) The Tele position is defined as the stopping position of (-1037) pulse count of Zoom
motor , (+430) pulse count of AF motor after Photo-Interrupter signal changing
detection.
5) The Wide ↔ Tele position is defined as the zoom & AF lens position according to
count of Zoom & AF motor pulse.
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
9 / 26
3-16. Zoom & AF Pulse Diagram
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
10 / 26
3-17. Zoom & Auto Focus Photo-Interrupter Specification
1) Maker : ROHM KIT-1019A
2) Electrical-Optical Characteristics
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
11 / 26
3-18. Zoom Motor Specification
1) CCW rotation at the view of output spindle : from Wide to Tele
2) Terminal Order
Terminal Name 1 2 3 4
ZM-A H L L H
ZM-B’ H H L L
ZM-A' L H H L
ZM-B L L H H
3) Electrical & Mechanical Characteristics
- Type : PM type Stepping motor
- Excitation system : 1-2phase excitation bipolar
- Basic step angle : 18°/1pulse ( 20step/ rotation → 2-2 phase excitation)
- Coil resistance : 60Ω/phase ± 10%
- Operating voltage : 4.0 ~5.5V
- Unit Zoom Lens movement : ( 10 )um/pulse (1-2 phase excitation)
4) Motor driving condition
- Rated voltage : (5.0)V ± 7% (Terminal Voltage)
- Driving wave form : Sine wave (Micro Step),1-2phase
- Driving PPS range : (0 ~ 1400) PPS → 1-2 phase excitation
5) Moving accuracy (Horizontal)
In case of N step moving in any focus range with (0 ~ 1400) PPS,
the actual moving amount X shall satisfy the below equation.
Backlash : X = ( 20 ) × N um ± 40 um (±2 pulse)
6) Driving error frequency
There is no driving error with (0 ~ 1400) PPS operating in the condition
of motor terminal voltage (5.0)V ± 7% including temperature condition.
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
12 / 26
3-19. Focus Motor Specification
1) CCW rotation at the view of output spindle : from Near to Far
2) Terminal Order
Terminal Name 1 2 3 4
AFM-A H L L H
AFM-B’ H H L L
AFM-A' L H H L
AFM-B L L H H
3) Electrical & Mechanical Characteristics
- Type : PM type Stepping motor
- Excitation system : 1-2phase excitation bipolar
- Basic step angle : 18°/1pulse ( 20step/ rotation → 1-2 phase excitation)
- Coil resistance : 60Ω/phase ± 10%
- Operating voltage : 4.0 ~5.5V
- Unit Focus Lens movement : ( 5 )um/pulse (1-2 phase excitation)
4) Motor driving condition
- Rated voltage : (5.0)V ± 7% (Terminal Voltage)
- Driving wave form : Sine wave (Micro Step), 1-2phase
- Driving PPS range : (0 ~ 1400) PPS → 1-2 phase excitation
5) Moving accuracy (Horizontal)
In case of N step moving in any focus range with (0 ~ 1400) PPS,
the actual moving amount X shall satisfy the below equation.
Backlash : X = (10) × N um ± 20 um (±2 pulse)
6) Driving error frequency
There is no driving error with (0 ~ 1400) PPS operating in the condition
of motor terminal voltage (5.0)V ± 7% including temperature condition.
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
13 / 26
3-20. Auto IRIS Specification
1) Electrical & Mechanical Characteristics
- Type : Servo motor
- Structure : Damping coil, Drive Coil, ND filter, Aperture unit
- Full Aperture : φ 7.6
- IRIS Blade : 2pcs (with ND filter)
2) ND filter Specification
- Density : ND-6.3B (SUMIMOTO)
3) Coil specification (20℃)
Spec Turn Resistance
Drive coil 3UEW, φ0.045 730±3 190Ω ± 10%
Damping Coil 2UEW, φ0.035 1110±5 850Ω ± 10%
(Coil 465Ω + R 390Ω)
2) Driving Condition
- Rated Voltage : (3.0)V, FPCB Terminal Voltage
Drive Coil P (19) ( + ) Open
( - ) Close
Drive Coil N (20) ( - ) ( - )
1.25 ±0.2
1.25 ±0.2
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
14 / 26
3-21. Day & Night Conversion system Motor Specification
1) IR Cut Filter Driving System
IR-Cut Filter : Thickness of material t=0.3mm;
Drive coil : 240Ω±10%
IR Filter In Out : 5V, IR Filter Out In : -5V
2) Day & Night conversion
- Day Mode : IR Cut Filter on
- Night Mode : IR Cut Filter off
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
15 / 26
3-17. Hall sensor Specification
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
16 / 26
4. Working Noise
4-1. Zoom
As a rule, the test should be carried out on the packaged unit.
There is under ( 40 ) dB in the below condition.
- Distance : 50㎜ from Lens Top to Micro Phone
- Background Noise : (20) dB
- Driving Method : Micro Step
※ There is no problem in practical use with Movie Mode.
4-2. Focus
As a rule, the test should be carried out on the packaged unit.
There is under ( 40 ) dB in the below condition.
- Distance : 50㎜ from Lens Top to Micro Phone
- Background Noise : (20) dB
- Driving Method : Micro Step
※ There is no problem in practical use with Movie Mode.
4-3. Auto IRIS
As a rule, the test should be carried out on the packaged unit.
There is under ( 40 ) dB in the below condition.
- Distance : 50㎜ from Lens Top to Micro Phone
- Background Noise : (20) dB
- Driving Method : Micro Step
※ There is no problem in practical use with Movie Mode.
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
17 / 26
5. FPCB Pin description
5-1. Table of Pin Assignment
Pin No Terminal name Description
1 ZPI_K Zoom Photo Interrupter Cathode
2 ZPI-E Zoom Photo Interrupter Emitter
3 PI_VCC Photo Interrupter VCC
4 ZM_AP ZM Motor A+
5 ZM_AN ZM Motor A-
6 ZM_BP ZM Motor B+
7 ZM_BN ZM Motor B-
8 FM_AP AF Motor A+
9 FM_AN AF Motor A-
10 FM_BP AF Motor B+
11 FM_BN AF Motor B-
12 PI_VCC Photo Interrupter VCC
13 FPI_K AF Photo Interrupter Cathode
14 FPI_E AF Photo Interrupter Emitter
15 ICF DC+ (Out)
16 ICF DC- (In)
17 NA NA
18 NA NA
19 IRIS_DRIVE_P AUTO IRIS Drive Coil +
20 IRIS_DRIVE_N AUTO IRIS Drive Coil -
21 IRIS_DAMP_P AUTO IRIS Damping Coil +
22 IRIS_DAMP_N AUTO IRIS Damping Coil -
23 HIN_N HALL IN -
24 HOUT_N HALL OUT -
25 HIN_P HALL IN +
26 HOUT_P HALL OUT +
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
18 / 26
5-2. FPCB Connecting Wire
5-3. FPCB Connector Information (TBD)
1) Type : 26pin, 0.5pitch Normal
2) Terminal Dimension
C
B
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
19 / 26
6. Outline Dimension
6-1 2D Drawing
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
20 / 26
IMX036 : -0.9mm
OV2715 : -0.31mm
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
22 / 26
7. Reliability Test
7-1. All Sorts of Test
Testing with various samples of exclusive use.
7-2. Initial Performance Test
Testing at room temperature, normal humidity (20℃±5℃, 60%±5%)
7-3. Operating Climatic Test
Accuracy guaranteed range : (-10)℃ ~ (+50)℃, humidity (80)%
Operating guaranteed range : (-20)℃ ~ (+50)℃, humidity (50)%
7-4. High Temperature, High Humidity Storage
There is no problem in practical use at the validation in the below condition
with packaged unit.
- Storage (12H) at room temperature after (120H) storage with Temperature
: (+60℃), Humidity : (80%)
7-5. Storage Temperature Test
There is no problem in practical use at the validation in the below condition with
packaged unit.
1) Hot
Storage (12H) at room temperature after (48H) storage with Temperature (+85℃)
2) Cold
Storage (12H) at room temperature after (48H) storage with Temperature (-30℃)
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
23 / 26
7-6. Temperature Cyclic Test
There is no problem in practical use with storage of 2H at room temperature after
30cycles with the below diagram.
7-7. Drop Test
When the test should be carried out on the packaged unit, there is no problem in
practical use in the below condition.
1) Drop
- Drop on the veneer board from (80 cm) height.
- Direction : 6 surfaces (each 1 time, total 6 times)
2) Continuous Drop
- Drop (50 times) on the veneer board from (50 cm) height.
7-8. Vibration Test
When the test should be carried out on the packaged unit, there is no problem in
practical use in the below condition.
- Sweeping Frequency : (10 ~ 60Hz)
- Period : (3 minutes)
- Amplitude : (1.0 mm)
- Direction : 3 directions (each 1 time, total 3times)
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
24 / 26
7-9. Endurance Testing
1) Zoom motor
- More than (500,000 cycle) at room temperature.
2) Focus motor
- More than (500,000 cycle) at room temperature.
A
CW(o
n)
CCW(
off)
Excitation
on(hold)
26
1
I
M
X
0
3
6
:
-
0
.
9
m
m
TELE 2,074Ste
106Step
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
25 / 26
3) ICF motor
- More than (200,000 cycle) at room temperature.
4) IRIS
- More than (500,000 cycle) at room temperature.
0.1sec
800Step
360pps
1320pps
1sec delay Near
8Step
800Step
PI=0
Far 1 1320
Preliminary
Specification Version 7.0
11. Dec. 2014 Model Name : EEL005D
26 / 26
7-11. Secular Changing
There is no remarkable deterioration with performance in a secular changing of normal
use and normal storage.
7-12. Electrostatic Destruction Test
Consider a counterplan with an additional deliberation when becoming an issue.