Information Sheet Zone Pro - Deep Violet

Specifications Hook Potential: 20-13 (dull/shiny) Typical Length: 3.5 Typical Backend: 10+ Proactive MTX4 Coverstock Polished Finish RG Max: 2.612 RG Min: 2.551 RG Differential: 0.049 Average RG: 4.8 Track Flare Potential: 9.3

Reaction Characteristics

Introducing Zone Pro™ - Deep Violet, featuring Brunswick’s exclusive Proactive MTX4™ coverstock. This new formulation combines the impressive performance characteristics of Proactive™ with a more Skid/Snap arc than the previous Zone Pro’s. The traction effect built into all formulations of Proactive™ coverstocks results in a strong but smooth reaction on the lane that is less skittish or squirty at the breakpoint compared to reactive urethanes. Proactive™ inspires confidence in the strength of the reaction and in the repeatability of the shot.

Introducing Traction Effect Characteristic, the newest industry statistic. Traction Characteristic helps you calibrate where the traction will kick in and to what degree. (See next page for traction effect chart)

The traction effect generated by Proactive™, provides a readable reaction that also creates a significant increase in overall hook for virtually any bowler style on a wide variety of lane conditions, even when shined. If the bowler desires more hooking action out of the box, Proactive™ can be sanded and will provide a cleaner front end reaction than dull reactive balls, while maintaining strong mid-lane and back end reactions. Proactive™ is a significant improvement over reactive urethane technology when used dull as it delivers a reaction that is much less sensitive on the front part of the lane. Most of the increase in hook will come in the middle and backend parts of the lane, offsetting any early reaction that may be created by sanding the ball. Proactive’s impressive performance improvements are not achieved through higher friction. In fact, Proactive™ is no more abrasive against lane surfaces than conventional or reactive urethane coverstocks.

WWW.BRUNSWICKBOWLING.COM

Information Sheet Zone Pro - Deep Violet

Drilling Information All weights of the Zone Pro™- Deep Violet can be drilled using the techniques developed for two-piece balls. See Brunswick’s “Seven Popular Layouts” for detailed drilling information.

The revolutionary performance characteristics of Proactive™ allow the pro shop to fully utilize layout choices to create desired reactions. Due to the strength of the Proactive™ material stronger release players would be advised to use layouts 4-7 on the seven popular layouts sheet. For average release players that desire a ball reaction more like a “cranker”, layouts 1-3 will produce very strong reactions if their release generates a fair amount of side roll, even if they don’t have a lot of revs.

Polishing and Cleaning

Proactive’s textured surface is more resistant to polishing than reactive urethane. The maximum achievable gloss will be lower than reactive urethane.

Proactive™ can be cleaned using the same methods and materials used to clean reactive resin balls.

• Traction Characteristic Chart

• ETX 1 2 3 4 5 Enhanced Traction Effect -The strongest traction; features even arching trajectory throughout.

• MTX 1 2 3 4 5 Mid Traction Effect - Mid-point traction; with trajectory between even arching and angular.

• DTX 1 2 3 4 5 Delayed Traction Effect -Postponed traction; provides angular trajectory to the pocket.

Traction Characteristic Chart

ETX 1 2 3 4 5 Enhanced Traction Effect - The strongest traction; features even arching trajectory throughout. MTX 1 2 3 4 5 Mid Traction Effect - Mid-point traction; with trajectory between even arching and angular. DTX 1 2 3 4 5 Delayed Traction Effect - Postponed traction; provides angular trajectory to the pocket.