pro20-012 fuel transfer pumps€¦ · motor: 2350 rpm, 3/10 hp (220 watts) motor protection: 40 amp...
TRANSCRIPT
©2014 Great Plains Industries, Inc. All Rights Reserved.
MATERIALS
Rotor Vane Material: Carbon
Pump Housing Material: Cast Iron
Rotor Material: Powdered Metal: Iron Alloy
Rotor Key Material: Stainless Steel
Seal Material: Nitrile (NBR)
XTS Seals Material: Nitrile (NBR)
Anti Siphon Valve: None
Tank Adapter: None
Pressure Relief Valve: None
Coatings: Automotive Grade Paint
Nozzle Cover Configuration: Closed End - Protects Nozzle Opening
PACKAGING
Shipping Weights:
PRO20-012AD/01AG (# 501000-60): 50.5 lbs (22.9 kg)
PRO20-012AD/01AL (# 501000-61): 50.5 lbs (22.9 kg)
PRO20-012AD (# 501000-03): 49.6 lbs (22.5 kg)
PRO20-012MD (# 501000-02) 47.5 lbs (21.5 kg)
PRO20-012PO (# 501000-01): 35.5 lbs (16.1 kg)
PRO20-012AD/XTS (# 501000-04): 49.6 lbs (22.5 kg)
Carton Dimensions L / W / H: 18.5" x 18.5" x 12.8"
Carton: Direct Print on Kraft (Brown)
KITS
501500-03 Vane Kit - Vane, key and O-ring
501500-04 Shaft Seal Kit
PUMP
Pump Flowrate: Up to 20 GPM (76 LPM) *
Dispensing Hose: 18 ft. (5.5 m) x 1 in.
Suction Lift/Dry Prime: 15 ft. (4.6 m) Maximum
Discharge Lift: 10 ft. (3 m) Maximum
Operating Temp: -20° to +125° F (-29° to +52° C)
XTS Pump OperatingTemp: -40° to +125° F (-40° to +52° C)
XTS Hose Temp: -65° F (-54° C)
XTS Nozzle Temp: -60° F (-51° C)
Bypass Pressure: 20 psi
Bung: 2 in. NPT
Inlet / Outlet: 1 in. NPT / 1 in. NPT
Suction Pipe Material: Steel - Adjustable to 40"
Flowrate - At Head: 23.4 GPM
Flowrate - Auto Nozzle: 19.1 GPM (With 18 ft. Hose)
Flowrate - Manual Nozzle: 20.4 GPM (With 18 ft. Hose
Strainer Mesh Size: 914 Micron
Warranty: 4-Year (See Owner’s Manual for Details)
*Estimated Time to Empty a 10,000 Gallon Tank: 8.7 Hours
MOTOR
Power: 12- volt DC
Current Draw: 27 amps
Motor: 2350 RPM, 3/10 hp (220 watts)
Motor Protection: 40 amp circuit breaker
Fuse: 40 amp
Power Cord: 18 ft. (5.5 m) x 12 AWG
Duty Cycle On/Off: 30 min. / 30 min.
Conduit: 3/4 in. NPT
Motor Approvals: Class 1, Division 1, Group D
Extended Duty: Based on internal GPI® testing at 104° F (ambient), the pump is capable of operating continuously without exceeding the internal temperature limits of the motor. Higher ambient temperatures could reduce results.
PRO20-012 Fuel Transfer PumpsRecommended Use: Gasoline (up to 15% alcohol blends such as E-15), diesel fuel (up to 20% biodiesel blends such as B20), and kerosene
08/14 COM_1016