Auto Align® Bale SkoopsL a r g e S q u a r e B a l e S t a c k e r s

PRIN

TED

IN C

AN

AD

A

#012

506

Morris ProAG Auto Align® Bale Skoopsare designed for dairy farmers, hay grow-ers and custom operators. They are builttough with exacting attention to detail tomaximize your time and productivity.

The Bale Claw mounted to a loader movesbales easily from an existing stack to atruck. The 5000VE will pick up three 3x3bales, three 3x4 bales, or two 4x4 balesfrom the end of the stack for loading ontoa truck.

Loading a truck with three 3x3 largesquare bales.

Morris ProAG Bale Claw 5000VE

G e n e r a l S p e c i f i c a t i o n s

Bale Skoop HD4SR - 3x4 and 4x4 Large Square Bale Stacker

Minimum-maximum bale lengthMaximum lift capacity of loaderMaximum stacker loadRoadsiding capacity in tons per hourImplement tiresStacker weight emptyTongue weight emptyTongue weight loadedOverall widthMinimum height of building for stacking inside

6.5 ft - 8.5 ft (2 - 2.6 m)3,000 lbs (1,361 kg)9,000 lbs (4,082 kg)

30 - 50 tons (27 - 45 tonnes)14 ply, 21.5x16.1

7,000 lbs (3,175 kg)800 lbs (363 kg)

1,300 lbs (590 kg)10 ft 8 in (3.27 m)18 ft 6 in (5.64 m)

BalersHesston 4910/4900/4800Case IH 8590/8580Freeman 1592, CommandRamNew Holland 595/BB960Case IH 8585/LBX 431Hesston 4790Krone VFS 128Claas Quadrant 2200

Bale Orientation4 Bales on or off strings4 Bales on or off strings5 Bales on strings6 Bales on strings*6 Bales on strings*6 Bales on strings*6 Bales on strings*7 Bales on strings**Bed extensions required when stacking six 3x4 bales

Bale Skoop 12SR - 3x3 Large Square Bale Stacker (can do 3x4 and 4x4 bales)

Minimum-maximum bale lengthMaximum lift capacity of loaderMaximum stacker loadRoadsiding capacity in bales per hourTerra tiresDual truck tiresStacker weight emptyTongue weight emptyTongue weight loadedOverall widthMinimum height of building for stacking inside

Tractor RequirementsHP requirementsHydraulic pressureFlow required for optimum performanceHydraulic controls

6.5 ft - 8.5 ft (2 - 2.6 m)3,000 lbs (1,361 kg)

12 - 3 x 3 bales/up to 14,000 lbs (6,350 kg)70 - 90 3 x 3 bales

600/55-22.5 (16 ply)11R-24.5

7,600 lbs (3,447 kg)800 lbs (363 kg)

1,300 lbs (590 kg)11 ft 5 in (3.48 m)18 ft 6 in (5.64 m)

125 Minimum2250 PSI (15,500 Kpa)

20 gpm3

BalersHesston 4750/4755/4760Case IH 8570/8575/LBX 331New Holland 590/BB940John Deere 100Krone VFS 88

Bale Orientation12 Bales on strings12 Bales on strings12 Bales on strings12 Bales on strings12 Bales on strings

Hesston® is a registered trademark of AGCO corporation. Case® and New Holland® are a registered trademark of CNH corporation.Specific operations may vary from the average due to crop, machine management and weather conditions which are important factorsin the end results. For optimum performance bales must be tight and dry.

Tractor RequirementsHP requirementsHydraulic pressureFlow required for optimum performanceHydraulic controls

125 Minimum2250 PSI (15,500 Kpa)

20 gpm3

P.O. Box 1117, Minot ND 58702-1117 Tel: 866.663.8515 Fax: 866.663.8535www.morris-industries.com/proag

The policy of Morris is one of continuing improvement; therefore, the company reserves the right to change specificationswithout notice.

Grab hooks holdthe first bale inplace. Uniquefloating pipes onthe alignmentarms hold thesecond bale, tocreate the for-ward stair-step.

Auto A l ign ® Ba le Skoops . . . p i ck more ba les , fas te r

Bales are easily picked in any orientation - they are auto-matically positioned with the two alignment arms as theHD4SR moves forward. When the bale is squeezedbetween the arms the loader automatically rotates up -both operate on oneremote control. There areno chains or pull-offs, thebed is inclined allowing thebales to slide to the back ofthe bed by gravity. At the stacking location,steering with the hitchallows the operator to seethe existing stack so theload can be easily aligned.High-flotation tires reduce soil compaction.

Heavy duty frame features a22,000 lb (9,979 kg) fullwidth axle and customizedbed cylinders for years ofuninterrupted service. Thehitch is cradled front andrear for added strength.Plastic wear plates are locatedat contact points. Operator’smanual is housed in aweather-proof box.

Well designed and built for demanding conditions. Stacks are aligned both vertically and horizontally for easy loading onto atruck. Heavy wall tubing and custom designed cylinders provide the strength and performance you require year after year.

R e l i a b l e , C o s t E f f e c t i v e , L o w M a i n t e n a n c e , Q u i c k & E a s y O p e r a t i o n

Fork lift teeth are sturdy enough towithstand impact and weight of a fullstack of bales.

Morris ProAGBale Skoops feature a customsequence valve -only one tractorremote is neededto pick up andload bales.

The Auto Align® system allows the operator to pick up bales in the same directionas the field was baled (12SR model shown).

The hydraulic manifold(12SR shown) is locatedfor easy access and serv-icing.

Morris ProAG 12SR Bale Skoop

4x4 baler ball style hitch.Hydraulic hoses aresheathed and labeled foreasy hook-up. Safetychain is included.

Automatic grab hooks hold the first bale in position allowing the alignment arms to reopen toengage the second bale. The loader automaticallyrotates up as the two bales are squeezed. Bales

can be picked inany orientation.The loader, align-ment arms, andgrab hooks aresequenced on oneremote. Stair stepping thebales during load-ing aids in helpingthe bales slideback on the bed. Once the bed is vertical, the align-

ment arms are opened, and the12SR is driven forward to removethe teeth from under the stack.

Morris ProAG HD4SR Bale Skoop