ENGLISHInstruction Datasheet

PROCESS CONTROL UNIT

96 x 48 DIN Size

Stock Number: 1981167

Universal Input PID Process Controllers

- 4 digit process (PV) and 4 digit set (SV) display

-

-

Universal process input (TC, RTD, mVZ V, mA Z)

- Dual or multi point calibration for ZVoltage & Z current inputs

- Auto-tune and Self-tune PID- Manual/Automatic mode selection for control outputs- Bumpless transfer

- Programmable heating, cooling and alarm functions for control outputs

Configurable ON/OFF, P, PI, PD and PID control forms

- Motorized valve control function

- 8 steps profile control ( Ramp & Soak ) function and start-holdstop by using logic input module-Remote set point function by using analogue input modules- Re-Transmission

- Detection of heater failure by using 0...5 AVCT- Smart I/O module system- RS-232 (standard) or RS-485 (optional) serial communication with Modbus RTU protocol

IDM 503 / 505 English

Input

Environmental Rating and Physical Specification

Supply Voltage

Dimensions

96x48mm

Specifications

Electrical Wirings

2

ENGLISH

100-240VV 50/60 Hz (-%15;+%10) -6VA

Universal Input: TC, RTD, Z Voltage/CurrentThermocouple (TC): L(DIN 43710) ,J , K , R , S , T , B , E and N (IEC584.1)(ITS90) ,C (ITS90)

Thermoresistance (RTD): PT-100 (IEC751)(ITS90) Z Input: mV, V, mA

Output

Standard Relay Outputs : 5A@250VV()

Programmable control or alarm output) (Electrical Life : 100.000 Operation (Full LoadRelay Output Module

Operating Temperature: 0...50°C

Humidity : 0-90%RH (none condensing)

Protection Class : NEMA 4X (IP65 at front, IP20 at rear).

96 x 48 mm

UniversalProcess Input

Thermocouples,Thermoresistances,

0...10Vdc,0/4...20mAdc

24Vdcmax.50mA

SensorSupply

Supply Voltage100-240Vac

RS-232 ModBus

*Input and Outputs Modules Process OutputRelay Output 5A@250Vac

NO C NCDigital InputEMI-400

Module