process journal 15

3
~Shave the dowels, and sand dowels to join the dowels/ marked for pig’s eyes~ Monday 16/05/11 Today I did lots of work. First, I used sharpener to shave edge of dowels. It makes easier to join the dowels and pig’s back together. Second, I put glue inside of dowels, use tiny wood stick to spread out the glue that inside of holes, and I used wooden mallet to hit it. I thought it is going to be fit now, because I shaved edge of dowels, so it is easier to joint together. But actually it doesn’t fit. This is because the dowels heights are not same (Not same size). So Mr. Anderson used disk sander and sand dowels to make dowels heights all same. Third, we used G clamps to fix my toy, and make sure I need to put dowels inside of holes. During this my toy got crack, so I need to fix that. I used glue and wet cloth to fix it. Fourth, I put my toy on the desk and use wooden mallet to hit it. Finished joining together!! Five, I put glue inside of holes, and then use tiny stick to spread out the glue. Sixth, I brought different colors of felt for choose which felt is going to be use for pig’s nose. I chose light pink. First time I was going to use skin color, because it match with Use sharpener to shave dowels After shave the dowels

Upload: risia

Post on 22-Jan-2015

116 views

Category:

Technology


0 download

DESCRIPTION

 

TRANSCRIPT

  • 1. -1257300381000~Shave the dowels, and sand dowels to join the dowels/ marked for pigs eyes~ Monday 16/05/11
    After shave the dowels-22555206096000-22555204445000Use sharpener to shave dowels-22555202540000-12268201016000 Today I did lots of work. First, I used sharpener to shave edge of dowels. It makes easier to join the dowels and pigs back together. Second, I put glue inside of dowels, use tiny wood stick to spread out the glue that inside of holes, and I used wooden mallet to hit it. I thought it is going to be fit now, because I shaved edge of dowels, so it is easier to joint together. But actually it doesnt fit. This is because the dowels heights are not same (Not same size). So Mr. Anderson used disk sander and sand dowels to make dowels heights all same. Third, we used G clamps to fix my toy, and make sure I need to put dowels inside of holes. During this my toy got crack, so I need to fix that. I used glue and wet cloth to fix it. Fourth, I put my toy on the desk and use wooden mallet to hit it. Finished joining together!! Five, I put glue inside of holes, and then use tiny stick to spread out the glue. Sixth, I brought different colors of felt for choose which felt is going to be use for pigs nose. I chose light pink. First time I was going to use skin color, because it match with pigs face color, and normally it should be skin color. But I asked Ana, Marley, and Sana to which felt is suitable to make pigs nose. They said light pink. I thought why, so I asked why. They said small kids love light color, normal color is not good. Its like eye catch. Seventh, I need plastic eyes for pigs face. I got big 2 eyes plastic. And then I marked with pencil, this is for when I drill it, I need see where I need to drill. I also leaned from this. -911225-761365Before I thought I just use glue and stick plastic eyes. But actually it was wrong. I need to drill little -9144006858000-9144004953000-9112253048635-9112251143635bit before you put the plastic eyes. I will use special drill pit for drill.
    Put glue inside of holes
    Use tiny stick to spread glueEmotion- I felt worthy with my toy. I got many problems while making my toy. But now my project is nearly finish!! So good!
    AOI/Learner Profile-THINKERS
    Wooden mallet to hit itToday I think in different ways for choosing felt color. Ana, Marley and Sana, led me to think in kids opinion. I was going to use skin color felt for pigs nose, but Ana, Marley and Sana said light pink is better. Kids love light color, and it is easy to eye catch.
    Use disk sander to sand dowelsNext- I will use special drill pit for drill. This is for put plastic eyes, and after this I will put clay inside of holes to hide big holes. After this I need to paint again. (Edge of dowels, and above the clay.)
    Use G clamps to fix it.
    546100635
    Try to join it!
    Put on the tableYou can see the dowels are all fit in holes.-685800-8890003314700-889000
    Put glue inside of holes and use tiny wood stick to spread glues.
    Use wooden mallet to fix together32004000-8001000
    I will use this drill pit for next classMarked for drill here1016004385945-36703004258945Compare the felt to toy colorI finished to join together4445001972945-36703001972945